/****************************************************************************** * * Copyright(c) 2007 - 2017 Realtek Corporation. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * *****************************************************************************/ #ifndef __HAL_DATA_H__ #define __HAL_DATA_H__ #if 1/* def CONFIG_SINGLE_IMG */ #include "../hal/phydm/phydm_precomp.h" #ifdef CONFIG_BT_COEXIST #include #endif #include #ifdef CONFIG_SDIO_HCI #include #endif #ifdef CONFIG_GSPI_HCI #include #endif #if defined(CONFIG_RTW_ACS) || defined(CONFIG_BACKGROUND_NOISE_MONITOR) #include "../hal/hal_dm_acs.h" #endif /* * For RTL8723 WiFi/BT/GPS multi-function configuration. 2010.10.06. * */ typedef enum _RT_MULTI_FUNC { RT_MULTI_FUNC_NONE = 0x00, RT_MULTI_FUNC_WIFI = 0x01, RT_MULTI_FUNC_BT = 0x02, RT_MULTI_FUNC_GPS = 0x04, } RT_MULTI_FUNC, *PRT_MULTI_FUNC; /* * For RTL8723 WiFi PDn/GPIO polarity control configuration. 2010.10.08. * */ typedef enum _RT_POLARITY_CTL { RT_POLARITY_LOW_ACT = 0, RT_POLARITY_HIGH_ACT = 1, } RT_POLARITY_CTL, *PRT_POLARITY_CTL; /* For RTL8723 regulator mode. by tynli. 2011.01.14. */ typedef enum _RT_REGULATOR_MODE { RT_SWITCHING_REGULATOR = 0, RT_LDO_REGULATOR = 1, } RT_REGULATOR_MODE, *PRT_REGULATOR_MODE; /* * Interface type. * */ typedef enum _INTERFACE_SELECT_PCIE { INTF_SEL0_SOLO_MINICARD = 0, /* WiFi solo-mCard */ INTF_SEL1_BT_COMBO_MINICARD = 1, /* WiFi+BT combo-mCard */ INTF_SEL2_PCIe = 2, /* PCIe Card */ } INTERFACE_SELECT_PCIE, *PINTERFACE_SELECT_PCIE; typedef enum _INTERFACE_SELECT_USB { INTF_SEL0_USB = 0, /* USB */ INTF_SEL1_USB_High_Power = 1, /* USB with high power PA */ INTF_SEL2_MINICARD = 2, /* Minicard */ INTF_SEL3_USB_Solo = 3, /* USB solo-Slim module */ INTF_SEL4_USB_Combo = 4, /* USB Combo-Slim module */ INTF_SEL5_USB_Combo_MF = 5, /* USB WiFi+BT Multi-Function Combo, i.e., Proprietary layout(AS-VAU) which is the same as SDIO card */ } INTERFACE_SELECT_USB, *PINTERFACE_SELECT_USB; typedef enum _RT_AMPDU_BRUST_MODE { RT_AMPDU_BRUST_NONE = 0, RT_AMPDU_BRUST_92D = 1, RT_AMPDU_BRUST_88E = 2, RT_AMPDU_BRUST_8812_4 = 3, RT_AMPDU_BRUST_8812_8 = 4, RT_AMPDU_BRUST_8812_12 = 5, RT_AMPDU_BRUST_8812_15 = 6, RT_AMPDU_BRUST_8723B = 7, } RT_AMPDU_BRUST, *PRT_AMPDU_BRUST_MODE; /* Tx Power Limit Table Size */ #define MAX_REGULATION_NUM 4 #define MAX_RF_PATH_NUM_IN_POWER_LIMIT_TABLE 4 #define MAX_2_4G_BANDWIDTH_NUM 2 #define MAX_RATE_SECTION_NUM 10 #define MAX_5G_BANDWIDTH_NUM 4 #define NUM_OF_TARGET_TXPWR_2G 10 /* CCK:1, OFDM:1, HT:4, VHT:4 */ #define NUM_OF_TARGET_TXPWR_5G 9 /* OFDM:1, HT:4, VHT:4 */ #ifdef RTW_RX_AGGREGATION typedef enum _RX_AGG_MODE { RX_AGG_DISABLE, RX_AGG_DMA, RX_AGG_USB, RX_AGG_MIX } RX_AGG_MODE; /* #define MAX_RX_DMA_BUFFER_SIZE 10240 */ /* 10K for 8192C RX DMA buffer */ #endif /* RTW_RX_AGGREGATION */ /* E-Fuse */ #ifdef CONFIG_RTL8188E #define EFUSE_MAP_SIZE 512 #endif #if defined(CONFIG_RTL8812A) || defined(CONFIG_RTL8821A) || defined(CONFIG_RTL8814A) #define EFUSE_MAP_SIZE 512 #endif #ifdef CONFIG_RTL8192E #define EFUSE_MAP_SIZE 512 #endif #ifdef CONFIG_RTL8723B #define EFUSE_MAP_SIZE 512 #endif #ifdef CONFIG_RTL8814A #define EFUSE_MAP_SIZE 512 #endif #ifdef CONFIG_RTL8703B #define EFUSE_MAP_SIZE 512 #endif #ifdef CONFIG_RTL8723D #define EFUSE_MAP_SIZE 512 #endif #ifdef CONFIG_RTL8188F #define EFUSE_MAP_SIZE 512 #endif #ifdef CONFIG_RTL8188GTV #define EFUSE_MAP_SIZE 512 #endif #ifdef CONFIG_RTL8710B #define EFUSE_MAP_SIZE 512 #endif #ifdef CONFIG_RTL8192F #define EFUSE_MAP_SIZE 512 #endif #if defined(CONFIG_RTL8814A) || defined(CONFIG_RTL8822B) || defined(CONFIG_RTL8821C) || defined(CONFIG_RTL8814B) #define EFUSE_MAX_SIZE 1024 #elif defined(CONFIG_RTL8188E) || defined(CONFIG_RTL8188F) || defined(CONFIG_RTL8188GTV) || defined(CONFIG_RTL8703B) || defined(CONFIG_RTL8710B) #define EFUSE_MAX_SIZE 256 #else #define EFUSE_MAX_SIZE 512 #endif /* end of E-Fuse */ #define Mac_OFDM_OK 0x00000000 #define Mac_OFDM_Fail 0x10000000 #define Mac_OFDM_FasleAlarm 0x20000000 #define Mac_CCK_OK 0x30000000 #define Mac_CCK_Fail 0x40000000 #define Mac_CCK_FasleAlarm 0x50000000 #define Mac_HT_OK 0x60000000 #define Mac_HT_Fail 0x70000000 #define Mac_HT_FasleAlarm 0x90000000 #define Mac_DropPacket 0xA0000000 #ifdef CONFIG_RF_POWER_TRIM #if defined(CONFIG_RTL8723B) #define REG_RF_BB_GAIN_OFFSET 0x7f #define RF_GAIN_OFFSET_MASK 0xfffff #elif defined(CONFIG_RTL8188E) #define REG_RF_BB_GAIN_OFFSET 0x55 #define RF_GAIN_OFFSET_MASK 0xfffff #else #define REG_RF_BB_GAIN_OFFSET 0x55 #define RF_GAIN_OFFSET_MASK 0xfffff #endif /* CONFIG_RTL8723B */ #endif /*CONFIG_RF_POWER_TRIM*/ /* For store initial value of BB register */ typedef struct _BB_INIT_REGISTER { u16 offset; u32 value; } BB_INIT_REGISTER, *PBB_INIT_REGISTER; #define PAGE_SIZE_128 128 #define PAGE_SIZE_256 256 #define PAGE_SIZE_512 512 #define HCI_SUS_ENTER 0 #define HCI_SUS_LEAVING 1 #define HCI_SUS_LEAVE 2 #define HCI_SUS_ENTERING 3 #define HCI_SUS_ERR 4 #define EFUSE_FILE_UNUSED 0 #define EFUSE_FILE_FAILED 1 #define EFUSE_FILE_LOADED 2 #define MACADDR_FILE_UNUSED 0 #define MACADDR_FILE_FAILED 1 #define MACADDR_FILE_LOADED 2 #define MAX_IQK_INFO_BACKUP_CHNL_NUM 5 #define MAX_IQK_INFO_BACKUP_REG_NUM 10 struct kfree_data_t { u8 flag; s8 bb_gain[BB_GAIN_NUM][RF_PATH_MAX]; #if CONFIG_IEEE80211_BAND_5GHZ s8 pa_bias_5g[RF_PATH_MAX]; s8 pad_bias_5g[RF_PATH_MAX]; #endif s8 thermal; }; bool kfree_data_is_bb_gain_empty(struct kfree_data_t *data); struct hal_spec_t { char *ic_name; u8 macid_num; u8 sec_cam_ent_num; u8 sec_cap; u8 wow_cap; u8 macid_cap; u16 macid_txrpt; u8 macid_txrpt_pgsz; u8 rfpath_num_2g:4; /* used for tx power index path */ u8 rfpath_num_5g:4; /* used for tx power index path */ u8 rf_reg_path_num; u8 rf_reg_path_avail_num; u8 rf_reg_trx_path_bmp; /* [7:4]TX path bmp, [0:3]RX path bmp */ u8 max_tx_cnt; u8 tx_nss_num:4; u8 rx_nss_num:4; u8 band_cap; /* value of BAND_CAP_XXX */ u8 bw_cap; /* value of BW_CAP_XXX */ u8 port_num; u8 proto_cap; /* value of PROTO_CAP_XXX */ u8 txgi_max; /* maximum tx power gain index */ u8 txgi_pdbm; /* tx power gain index per dBm */ u8 wl_func; /* value of WL_FUNC_XXX */ #if CONFIG_TX_AC_LIFETIME u8 tx_aclt_unit_factor; /* how many 32us */ #endif u8 rx_tsf_filter:1; u8 pg_txpwr_saddr; /* starting address of PG tx power info */ u8 pg_txgi_diff_factor; /* PG tx power gain index diff to tx power gain index */ u8 hci_type; /* value of HCI Type */ }; #define HAL_SPEC_CHK_RF_PATH_2G(_spec, _path) ((_spec)->rfpath_num_2g > (_path)) #define HAL_SPEC_CHK_RF_PATH_5G(_spec, _path) ((_spec)->rfpath_num_5g > (_path)) #define HAL_SPEC_CHK_RF_PATH(_spec, _band, _path) ( \ _band == BAND_ON_2_4G ? HAL_SPEC_CHK_RF_PATH_2G(_spec, _path) : \ _band == BAND_ON_5G ? HAL_SPEC_CHK_RF_PATH_5G(_spec, _path) : 0) #ifdef CONFIG_PHY_CAPABILITY_QUERY struct phy_spec_t { u32 trx_cap; u32 stbc_cap; u32 ldpc_cap; u32 txbf_param; u32 txbf_cap; }; #endif struct hal_iqk_reg_backup { u8 central_chnl; u8 bw_mode; u32 reg_backup[MAX_RF_PATH][MAX_IQK_INFO_BACKUP_REG_NUM]; }; typedef struct hal_p2p_ps_para { /*DW0*/ u8 offload_en:1; u8 role:1; u8 ctwindow_en:1; u8 noa_en:1; u8 noa_sel:1; u8 all_sta_sleep:1; u8 discovery:1; u8 disable_close_rf:1; u8 p2p_port_id; u8 p2p_group; u8 p2p_macid; /*DW1*/ u8 ctwindow_length; u8 rsvd3; u8 rsvd4; u8 rsvd5; /*DW2*/ u32 noa_duration_para; /*DW3*/ u32 noa_interval_para; /*DW4*/ u32 noa_start_time_para; /*DW5*/ u32 noa_count_para; } HAL_P2P_PS_PARA, *PHAL_P2P_PS_PARA; #define TXPWR_LMT_RS_CCK 0 #define TXPWR_LMT_RS_OFDM 1 #define TXPWR_LMT_RS_HT 2 #define TXPWR_LMT_RS_VHT 3 #define TXPWR_LMT_RS_NUM 4 #define TXPWR_LMT_RS_NUM_2G 4 /* CCK, OFDM, HT, VHT */ #define TXPWR_LMT_RS_NUM_5G 3 /* OFDM, HT, VHT */ #if CONFIG_TXPWR_LIMIT extern const char *const _txpwr_lmt_rs_str[]; #define txpwr_lmt_rs_str(rs) (((rs) >= TXPWR_LMT_RS_NUM) ? _txpwr_lmt_rs_str[TXPWR_LMT_RS_NUM] : _txpwr_lmt_rs_str[(rs)]) struct txpwr_lmt_ent { _list list; s8 lmt_2g[MAX_2_4G_BANDWIDTH_NUM] [TXPWR_LMT_RS_NUM_2G] [CENTER_CH_2G_NUM] [MAX_TX_COUNT]; #if CONFIG_IEEE80211_BAND_5GHZ s8 lmt_5g[MAX_5G_BANDWIDTH_NUM] [TXPWR_LMT_RS_NUM_5G] [CENTER_CH_5G_ALL_NUM] [MAX_TX_COUNT]; #endif char regd_name[0]; }; #endif /* CONFIG_TXPWR_LIMIT */ typedef struct hal_com_data { HAL_VERSION version_id; RT_MULTI_FUNC MultiFunc; /* For multi-function consideration. */ RT_POLARITY_CTL PolarityCtl; /* For Wifi PDn Polarity control. */ RT_REGULATOR_MODE RegulatorMode; /* switching regulator or LDO */ u8 hw_init_completed; /****** FW related ******/ u32 firmware_size; u16 firmware_version; u16 FirmwareVersionRev; u16 firmware_sub_version; u16 FirmwareSignature; u8 RegFWOffload; u8 bFWReady; u8 bBTFWReady; u8 fw_ractrl; u8 LastHMEBoxNum; /* H2C - for host message to fw */ #ifdef CONFIG_LPS_1T1R u8 lps_1t1r; #endif /****** current WIFI_PHY values ******/ WIRELESS_MODE CurrentWirelessMode; enum channel_width current_channel_bw; BAND_TYPE current_band_type; /* 0:2.4G, 1:5G */ u8 current_channel; u8 cch_20; u8 cch_40; u8 cch_80; u8 CurrentCenterFrequencyIndex1; u8 nCur40MhzPrimeSC; /* Control channel sub-carrier */ u8 nCur80MhzPrimeSC; /* used for primary 40MHz of 80MHz mode */ BOOLEAN bSwChnlAndSetBWInProgress; u8 bDisableSWChannelPlan; /* flag of disable software change channel plan */ u16 BasicRateSet; u32 ReceiveConfig; #ifdef CONFIG_WIFI_MONITOR struct mon_reg_backup mon_backup; /* used for switching back from monitor mode */ #endif /* CONFIG_WIFI_MONITOR */ u8 rx_tsf_addr_filter_config; /* for 8822B/8821C USE */ BOOLEAN bSwChnl; BOOLEAN bSetChnlBW; BOOLEAN bSWToBW40M; BOOLEAN bSWToBW80M; BOOLEAN bChnlBWInitialized; #ifdef CONFIG_RTW_ACS struct auto_chan_sel acs; #endif #ifdef CONFIG_BCN_RECOVERY u8 issue_bcn_fail; #endif /*CONFIG_BCN_RECOVERY*/ /****** rf_ctrl *****/ u8 rf_chip; u8 trx_path_bmp; /* [7:4]TX path bmp, [0:3]RX path bmp */ u8 rf_type; /*enum rf_type , is RF_PATH - GET_HAL_RFPATH*/ u8 NumTotalRFPath; /*GET_HAL_RFPATH_NUM*/ u8 max_tx_cnt; u8 tx_nss; /*tx Spatial Streams - GET_HAL_TX_NSS*/ u8 rx_nss; /*rx Spatial Streams - GET_HAL_RX_NSS*/ u8 PackageType; u8 antenna_test; /* runtime TRX path setting */ enum bb_path txpath; /* TX path bmp */ enum bb_path rxpath; /* RX path bmp */ enum bb_path txpath_nss[4]; /* path bmp for NSS TX, [0] for 1SS, [3] for 4SS */ u8 txpath_num_nss[4]; /* path num for NSS TX, [0] for 1SS, [3] for 4SS */ /****** Debug ******/ u16 ForcedDataRate; /* Force Data Rate. 0: Auto, 0x02: 1M ~ 0x6C: 54M. */ u8 bDumpRxPkt; u8 bDumpTxPkt; u8 dis_turboedca; /* 1: disable turboedca, 2: disable turboedca and setting EDCA parameter based on the input parameter*/ u32 edca_param_mode; /****** EEPROM setting.******/ u8 bautoload_fail_flag; u8 efuse_file_status; u8 macaddr_file_status; u8 EepromOrEfuse; u8 efuse_eeprom_data[EEPROM_MAX_SIZE]; /*92C:256bytes, 88E:512bytes, we use union set (512bytes)*/ u8 InterfaceSel; /* board type kept in eFuse */ u16 CustomerID; u16 EEPROMVID; u16 EEPROMSVID; #ifdef CONFIG_USB_HCI u8 EEPROMUsbSwitch; u16 EEPROMPID; u16 EEPROMSDID; #endif #ifdef CONFIG_PCI_HCI u16 EEPROMDID; u16 EEPROMSMID; #endif u8 EEPROMCustomerID; u8 EEPROMSubCustomerID; u8 EEPROMVersion; u8 EEPROMRegulatory; u8 eeprom_thermal_meter; u8 EEPROMBluetoothCoexist; u8 EEPROMBluetoothType; u8 EEPROMBluetoothAntNum; u8 EEPROMBluetoothAntIsolation; u8 EEPROMBluetoothRadioShared; u8 EEPROMMACAddr[ETH_ALEN]; u8 eeprom_trx_path_bmp; /* [7:4]TX path bmp, [0:3]RX path bmp. 0x00:not specified */ u8 eeprom_max_tx_cnt; /* 0: not specified */ u8 tx_bbswing_24G; u8 tx_bbswing_5G; u8 efuse0x3d7; /* efuse[0x3D7] */ u8 efuse0x3d8; /* efuse[0x3D8] */ #ifdef CONFIG_RF_POWER_TRIM u8 EEPROMRFGainOffset; u8 EEPROMRFGainVal; struct kfree_data_t kfree_data; #endif /*CONFIG_RF_POWER_TRIM*/ #ifdef CONFIG_RTL8814A u32 BackUp_BB_REG_4_2nd_CCA[3]; #endif #if defined(CONFIG_RTL8723B) || defined(CONFIG_RTL8703B) || \ defined(CONFIG_RTL8723D) || \ defined(CONFIG_RTL8192F) u8 adjuseVoltageVal; u8 need_restore; #endif u8 EfuseUsedPercentage; u16 EfuseUsedBytes; /*u8 EfuseMap[2][HWSET_MAX_SIZE_JAGUAR];*/ EFUSE_HAL EfuseHal; u8 txpwr_pg_mode; /* enum txpwr_pg_mode */ /*---------------------------------------------------------------------------------*/ #ifdef CONFIG_TXPWR_PG_WITH_PWR_IDX /* 2.4G TX power info for target TX power*/ u8 Index24G_CCK_Base[MAX_RF_PATH][CENTER_CH_2G_NUM]; u8 Index24G_BW40_Base[MAX_RF_PATH][CENTER_CH_2G_NUM]; s8 CCK_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT]; s8 OFDM_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT]; s8 BW20_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT]; s8 BW40_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT]; /* 5G TX power info for target TX power*/ #if CONFIG_IEEE80211_BAND_5GHZ u8 Index5G_BW40_Base[MAX_RF_PATH][CENTER_CH_5G_ALL_NUM]; u8 Index5G_BW80_Base[MAX_RF_PATH][CENTER_CH_5G_80M_NUM]; s8 OFDM_5G_Diff[MAX_RF_PATH][MAX_TX_COUNT]; s8 BW20_5G_Diff[MAX_RF_PATH][MAX_TX_COUNT]; s8 BW40_5G_Diff[MAX_RF_PATH][MAX_TX_COUNT]; s8 BW80_5G_Diff[MAX_RF_PATH][MAX_TX_COUNT]; #endif #endif /* CONFIG_TXPWR_PG_WITH_PWR_IDX */ u8 txpwr_by_rate_undefined_band_path[TX_PWR_BY_RATE_NUM_BAND] [TX_PWR_BY_RATE_NUM_RF]; s8 TxPwrByRate[TX_PWR_BY_RATE_NUM_BAND] [TX_PWR_BY_RATE_NUM_RF] [TX_PWR_BY_RATE_NUM_RATE]; /* Store the target power for each rate section and rf path */ u8 target_txpwr_2g[TX_PWR_BY_RATE_NUM_RF] [NUM_OF_TARGET_TXPWR_2G]; u8 target_txpwr_5g[TX_PWR_BY_RATE_NUM_RF] [NUM_OF_TARGET_TXPWR_5G]; bool set_entire_txpwr; #if defined(CONFIG_RTL8821C) || defined(CONFIG_RTL8822B) || defined(CONFIG_RTL8822C) || defined(CONFIG_RTL8814B) u32 txagc_set_buf; #endif #ifdef CONFIG_FW_OFFLOAD_SET_TXPWR_IDX u8 txpwr_idx_offload_buf[3]; /* for CCK, OFDM, HT1SS */ struct submit_ctx txpwr_idx_offload_sctx; #endif u8 txpwr_by_rate_loaded:1; u8 txpwr_by_rate_from_file:1; u8 txpwr_limit_loaded:1; u8 txpwr_limit_from_file:1; /* Read/write are allow for following hardware information variables */ u8 crystal_cap; u8 PAType_2G; u8 PAType_5G; u8 LNAType_2G; u8 LNAType_5G; u8 ExternalPA_2G; u8 ExternalLNA_2G; u8 external_pa_5g; u8 external_lna_5g; u16 TypeGLNA; u16 TypeGPA; u16 TypeALNA; u16 TypeAPA; u16 rfe_type; u8 bLedOpenDrain; /* Support Open-drain arrangement for controlling the LED. Added by Roger, 2009.10.16. */ u32 ac_param_be; /* Original parameter for BE, use for EDCA turbo. */ u8 is_turbo_edca; u8 prv_traffic_idx; BB_REGISTER_DEFINITION_T PHYRegDef[MAX_RF_PATH]; /* Radio A/B/C/D */ u32 RfRegChnlVal[MAX_RF_PATH]; /* RDG enable */ BOOLEAN bRDGEnable; #if defined (CONFIG_RTL8812A) || defined(CONFIG_RTL8821A) u32 RegRRSR; #endif /****** antenna diversity ******/ u8 AntDivCfg; u8 with_extenal_ant_switch; u8 b_fix_tx_ant; u8 AntDetection; u8 TRxAntDivType; u8 ant_path; /* for 8723B s0/s1 selection */ u32 antenna_tx_path; /* Antenna path Tx */ u32 AntennaRxPath; /* Antenna path Rx */ u8 sw_antdiv_bl_state; /******** PHY DM & DM Section **********/ _lock IQKSpinLock; u8 INIDATA_RATE[MACID_NUM_SW_LIMIT]; struct dm_struct odmpriv; u64 bk_rf_ability; u8 bIQKInitialized; u8 bNeedIQK; u8 neediqk_24g; u8 IQK_MP_Switch; u8 bScanInProcess; u8 phydm_init_result; /*BB and RF para match or not*/ s8 shift_rxagc; /* -63 ~ 63 */ /******** PHY DM & DM Section **********/ /* 2010/08/09 MH Add CU power down mode. */ BOOLEAN pwrdown; #ifdef CONFIG_P2P #ifdef CONFIG_P2P_PS_NOA_USE_MACID_SLEEP u16 p2p_ps_offload; #else u8 p2p_ps_offload; #endif #endif /* Auto FSM to Turn On, include clock, isolation, power control for MAC only */ u8 bMacPwrCtrlOn; u8 hci_sus_state; u8 RegIQKFWOffload; struct submit_ctx iqk_sctx; u8 ch_switch_offload; struct submit_ctx chsw_sctx; RT_AMPDU_BRUST AMPDUBurstMode; /* 92C maybe not use, but for compile successfully */ u8 OutEpQueueSel; u8 OutEpNumber; #ifdef RTW_RX_AGGREGATION RX_AGG_MODE rxagg_mode; /* For RX Aggregation DMA Mode */ u8 rxagg_dma_size; u8 rxagg_dma_timeout; #endif /* RTW_RX_AGGREGATION */ bool intf_start; #if defined(CONFIG_SDIO_HCI) || defined(CONFIG_GSPI_HCI) /* */ /* For SDIO Interface HAL related */ /* */ /* */ /* SDIO ISR Related */ /* * u32 IntrMask[1]; * u32 IntrMaskToSet[1]; * LOG_INTERRUPT InterruptLog; */ u32 sdio_himr; u32 sdio_hisr; #ifndef RTW_HALMAC /* */ /* SDIO Tx FIFO related. */ /* */ /* HIQ, MID, LOW, PUB free pages; padapter->xmitpriv.free_txpg */ #ifdef CONFIG_RTL8192F u16 SdioTxFIFOFreePage[SDIO_TX_FREE_PG_QUEUE]; #else u8 SdioTxFIFOFreePage[SDIO_TX_FREE_PG_QUEUE]; #endif/*CONFIG_RTL8192F*/ #ifdef CONFIG_SDIO_TX_ENABLE_AVAL_INT u8 sdio_avail_int_en_q; #endif _lock SdioTxFIFOFreePageLock; u8 SdioTxOQTMaxFreeSpace; u8 SdioTxOQTFreeSpace; #else /* RTW_HALMAC */ u16 SdioTxOQTFreeSpace; #endif /* RTW_HALMAC */ /* */ /* SDIO Rx FIFO related. */ /* */ u8 SdioRxFIFOCnt; #ifdef CONFIG_RTL8822C u32 SdioRxFIFOSize; #else u16 SdioRxFIFOSize; #endif #ifndef RTW_HALMAC u32 sdio_tx_max_len[SDIO_MAX_TX_QUEUE];/* H, N, L, used for sdio tx aggregation max length per queue */ #else #ifdef CONFIG_RTL8821C u16 tx_high_page; u16 tx_low_page; u16 tx_normal_page; u16 tx_extra_page; u16 tx_pub_page; u8 max_oqt_size; #ifdef XMIT_BUF_SIZE u32 max_xmit_size_vovi; u32 max_xmit_size_bebk; #endif /*XMIT_BUF_SIZE*/ u16 max_xmit_page; u16 max_xmit_page_vo; u16 max_xmit_page_vi; u16 max_xmit_page_be; u16 max_xmit_page_bk; #endif /*#ifdef CONFIG_RTL8821C*/ #endif /* !RTW_HALMAC */ #endif /* CONFIG_SDIO_HCI */ #ifdef CONFIG_USB_HCI /* 2010/12/10 MH Add for USB aggreation mode dynamic shceme. */ BOOLEAN UsbRxHighSpeedMode; BOOLEAN UsbTxVeryHighSpeedMode; u32 UsbBulkOutSize; BOOLEAN bSupportUSB3; u8 usb_intf_start; /* Interrupt relatd register information. */ u32 IntArray[3];/* HISR0,HISR1,HSISR */ u32 IntrMask[3]; #ifdef CONFIG_USB_TX_AGGREGATION u8 UsbTxAggMode; u8 UsbTxAggDescNum; #endif /* CONFIG_USB_TX_AGGREGATION */ #ifdef CONFIG_USB_RX_AGGREGATION u16 HwRxPageSize; /* Hardware setting */ /* For RX Aggregation USB Mode */ u8 rxagg_usb_size; u8 rxagg_usb_timeout; #endif/* CONFIG_USB_RX_AGGREGATION */ #endif /* CONFIG_USB_HCI */ #ifdef CONFIG_PCI_HCI /* */ /* EEPROM setting. */ /* */ u32 TransmitConfig; u32 IntrMaskToSet[2]; u32 IntArray[4]; u32 IntrMask[4]; u32 SysIntArray[1]; u32 SysIntrMask[1]; u32 IntrMaskReg[2]; u32 IntrMaskDefault[4]; u32 pci_backdoor_ctrl; u8 bDefaultAntenna; u8 bInterruptMigration; u8 bDisableTxInt; u16 RxTag; #endif /* CONFIG_PCI_HCI */ #ifdef DBG_CONFIG_ERROR_DETECT struct sreset_priv srestpriv; #endif /* #ifdef DBG_CONFIG_ERROR_DETECT */ #ifdef CONFIG_BT_COEXIST /* For bluetooth co-existance */ BT_COEXIST bt_coexist; #endif /* CONFIG_BT_COEXIST */ #if defined(CONFIG_RTL8723B) || defined(CONFIG_RTL8703B) \ || defined(CONFIG_RTL8188F) || defined(CONFIG_RTL8188GTV) || defined(CONFIG_RTL8723D)|| defined(CONFIG_RTL8192F) #ifndef CONFIG_PCI_HCI /* mutual exclusive with PCI -- so they're SDIO and GSPI */ /* Interrupt relatd register information. */ u32 SysIntrStatus; u32 SysIntrMask; #endif #endif /*endif CONFIG_RTL8723B */ #ifdef CONFIG_LOAD_PHY_PARA_FROM_FILE char para_file_buf[MAX_PARA_FILE_BUF_LEN]; char *mac_reg; u32 mac_reg_len; char *bb_phy_reg; u32 bb_phy_reg_len; char *bb_agc_tab; u32 bb_agc_tab_len; char *bb_phy_reg_pg; u32 bb_phy_reg_pg_len; char *bb_phy_reg_mp; u32 bb_phy_reg_mp_len; char *rf_radio_a; u32 rf_radio_a_len; char *rf_radio_b; u32 rf_radio_b_len; char *rf_tx_pwr_track; u32 rf_tx_pwr_track_len; char *rf_tx_pwr_lmt; u32 rf_tx_pwr_lmt_len; #endif #ifdef CONFIG_BACKGROUND_NOISE_MONITOR struct noise_monitor nm; #endif struct hal_spec_t hal_spec; #ifdef CONFIG_PHY_CAPABILITY_QUERY struct phy_spec_t phy_spec; #endif u8 RfKFreeEnable; u8 RfKFree_ch_group; BOOLEAN bCCKinCH14; BB_INIT_REGISTER RegForRecover[5]; #if defined(CONFIG_PCI_HCI) && defined(RTL8814AE_SW_BCN) BOOLEAN bCorrectBCN; #endif #ifdef CONFIG_RTL8814A u32 RxGainOffset[4]; /*{2G, 5G_Low, 5G_Middle, G_High}*/ u8 BackUp_IG_REG_4_Chnl_Section[4]; /*{A,B,C,D}*/ #endif struct hal_iqk_reg_backup iqk_reg_backup[MAX_IQK_INFO_BACKUP_CHNL_NUM]; #ifdef RTW_HALMAC u16 drv_rsvd_page_number; #endif #ifdef CONFIG_BEAMFORMING u8 backup_snd_ptcl_ctrl; #ifdef RTW_BEAMFORMING_VERSION_2 struct beamforming_info beamforming_info; #endif /* RTW_BEAMFORMING_VERSION_2 */ #endif /* CONFIG_BEAMFORMING */ u8 not_xmitframe_fw_dl; /*not use xmitframe to download fw*/ u8 phydm_op_mode; u8 in_cta_test; #ifdef CONFIG_RTW_LED struct led_priv led; #endif /* for multi channel case (ex: MCC/TDLS) */ u8 multi_ch_switch_mode; #ifdef CONFIG_RTL8814B u8 dma_ch_map[32]; /* TXDESC qsel maximum size */ #endif } HAL_DATA_COMMON, *PHAL_DATA_COMMON; typedef struct hal_com_data HAL_DATA_TYPE, *PHAL_DATA_TYPE; #define GET_HAL_DATA(__pAdapter) ((HAL_DATA_TYPE *)(((struct _ADAPTER*)__pAdapter)->HalData)) #define GET_HAL_SPEC(__pAdapter) (&(GET_HAL_DATA((__pAdapter))->hal_spec)) #define adapter_to_led(adapter) (&(GET_HAL_DATA(adapter)->led)) #define RT_GetInterfaceSelection(_Adapter) (GET_HAL_DATA(_Adapter)->InterfaceSel) #define GET_KFREE_DATA(_adapter) (&(GET_HAL_DATA((_adapter))->kfree_data)) #define SUPPORT_HW_RADIO_DETECT(Adapter) (RT_GetInterfaceSelection(Adapter) == INTF_SEL2_MINICARD || \ RT_GetInterfaceSelection(Adapter) == INTF_SEL3_USB_Solo || \ RT_GetInterfaceSelection(Adapter) == INTF_SEL4_USB_Combo) #define get_hal_mac_addr(adapter) (GET_HAL_DATA(adapter)->EEPROMMACAddr) #define is_boot_from_eeprom(adapter) (GET_HAL_DATA(adapter)->EepromOrEfuse) #define rtw_get_hw_init_completed(adapter) (GET_HAL_DATA(adapter)->hw_init_completed) #define rtw_set_hw_init_completed(adapter, cmp) (GET_HAL_DATA(adapter)->hw_init_completed = cmp) #define rtw_is_hw_init_completed(adapter) (GET_HAL_DATA(adapter)->hw_init_completed == _TRUE) /* refer to (hal_data->version_id.RFType / registrypriv->rf_path / 8814a from efuse or registrypriv)*/ #define GET_HAL_RFPATH(adapter) (GET_HAL_DATA(adapter)->rf_type) #define GET_HAL_RFPATH_NUM(adapter) (GET_HAL_DATA(adapter)->NumTotalRFPath) #define GET_HAL_TX_PATH_BMP(adapter) ((GET_HAL_DATA(adapter)->trx_path_bmp & 0xF0) >> 4) #define GET_HAL_RX_PATH_BMP(adapter) (GET_HAL_DATA(adapter)->trx_path_bmp & 0x0F) /* refer to (registrypriv-> tx_nss,rx_nss / hal_spec->tx_nss_num,rx_nss_num)*/ #define GET_HAL_TX_NSS(adapter) (GET_HAL_DATA(adapter)->tx_nss) #define GET_HAL_RX_NSS(adapter) (GET_HAL_DATA(adapter)->rx_nss) #endif #ifdef RTW_HALMAC int rtw_halmac_deinit_adapter(struct dvobj_priv *); #endif /* RTW_HALMAC */ #endif /* __HAL_DATA_H__ */