Changes to squid-3.5.27 (20 Aug 2017): - Regression Bug #4112: ssl_engine does not accept cryptodev - Bug 4687: Wrong names of components in man page, section SEE ALSO - Bug 4671: various GCC 7 compile errors - Bug 4464: Reduce "!Comm::MonitorsRead(serverConnection->fd)" assertions - Bug 2833: Collapse internal revalidation requests (SMP-unaware caches) - Bug 2833: Do not respond with HTTP/304 to unconditional requests - Fix message packing error handling in mgr and snmp SMP Forwarders - Fix mgr query handoff from the original recipient to Coordinator. - ... and some documentation updates Changes to squid-3.5.26 (01 Jun 2017): - Bug 4711: SubjectAlternativeNames is missing in some generated certificates - Bug 4695: squidpurge: GCC 7 build errors - Bug 4682: ignoring http_access deny when client-first bumping mode is used - Bug 4682: Fix ssl_bump "bump" action documentation - Bug 4653: %st lies about tunneled traffic volumes - Bug 4589: ssl_crtd: returning zero on failure - Bug 3772: message from FTP server gets mangled - Bug 3102: FTP directory listing drops fist character of file names - Add OpenSSL library details to -v output - ... and some documentation updates Changes to squid-3.5.25 (02 Apr 2017): - Bug 4688: various typo error(s) in man page(s) - Bug 4508: Host forgery stalls intercepted being-spliced connections - Native FTP relay: NAT and TPROXY interception fixes - Fix missing CRLF on FTP timeout ABORT commands - TLS: Bump client on errors encountered before ssl_bump evaluation - ext_kerberos_ldap_group_acl: fix unused value warnings - Fix crash when configuring with invalid delay_parameters restore value. - Check that -k argument is provided before trying to use it. - ... and some build fixes Changes to squid-3.5.24 (28 Jan 2017): - Regression Bug 3940: Make 'cache deny' do what is documented - TLS: Fix SSLv2 records bumping despite a matching step2 peek rule - TLS: Mitigate DoS attacks that use client-initiated SSL/TLS renegotiation - Fix "Source and destination overlap in memcpy" Valgrind errors - Reduce crashes due to unexpected ClientHttpRequest termination - Update External ACL helpers error handling and caching - Detect HTTP header ACL issues - ... and some documentation fixes Changes to squid-3.5.23 (16 Dec 2016): - Bug 4627: fix generate-host-certificates and dynamic_cert_mem_cache_size docs - Bug 4620: NetBSD build error with --enable-ipf-transparent - Bug 4567: Strange IPv6 shown in access.log - Bug 4406: SIGSEV in TunnelStateData::handleConnectResponse() during reconfigure and restart - Bug 4174 partial: fix Write.cc:41 "!ccb->active()" assertion. - Bug 4169: HIT marked as MISS when If-None-Match does not match - Bug 4007: Hang on DNS query with dead-end CNAME - Bug 4004 partial: Fix segfault via Ftp::Client::readControlReply - Bug 3940 partial: hostHeaderVerify failures MISS when they should be HIT - Bug 3533: Cache still valid after HTTP/1.1 303 See Other - Bug 3379: Combination of If-Match and a Cache Hit result in TCP Connection Failure - Bug 3290: authenticate_ttl not working for digest authentication - Bug 2258: bypassing cache but not destroying cache entry - HTTP/1.1: make Vary:* objects cacheable - HTTP/1.1: Add registered codes entry for new 103 (Early Hints) status code - Support IPv6 NAT with PF for NetBSD and FreeBSD - TLS: Make key= before cert= an error instead of quietly hiding the issue - ... and some debug updates - ... and some build fixes - ... and several documentation updates Changes to squid-3.5.22 (09 Oct 2016): - Bug 4594: build failure with clang 3.9 - Bug 4471: revalidation does not work when expired cached object lacks Last-Modified - Bug 4302 pt2: IPv6 support for IPFilter v5 transparent interception - Bug 4228: ./configure bug/typo in r14394 - Bug 3819: "fd >= 0" assertion in file_write() during reconfiguration - Bug 2833: Collapse internal revalidation requests (SMP-unaware caches) - Fix logged request size (%http::>st) and other size-related %codes - Fix some memory leaks from putenv() - Fix memory leaks from url_rewrite_extras and store_id_extras on reconfigure/shutdown - Fix segfault crash when debugging section 4 at level 9 - HTTP: MUST ignore a [revalidation] response with an older Date header Changes to squid-3.5.21 (08 Sep 2016): - Bug 4563: duplicate code in httpMakeVaryMark - Bug 4542: authentication credentials IP TTL updated incorrectly - Bug 4534: assertion failure in xcalloc when using many cache_dir - Bug 4428: mal-formed Cache-Control:stale-if-error header - Bug 3025: Proxy-Authenticate problem using ICAP server - Fix segfault via Ftp::Client::readControlReply() - Fix SSL-Bump failure results in SEGFAULT - HTTP/1.1: MUST always revalidate Cache-Control:no-cache responses - HTTP/1.1: do not allow Proxy-Connection to override Connection header - SSL: CN wildcard must only match a single domain component [fragment] Changes to squid-3.5.20 (01 Jul 2016): - Bug 4523: smblib compile fails on NetBSD - Bug 4485: off-by-one out-of-bounds Parser::Tokenizer::int64() read errors - Bug 3579: assertion failed 'MemPools[type]' from dst_as ACL - Fix icons loading speed - Fix OpenSSL detection on FreeBSD - Fix assertion failed: Write.cc:38: 'fd_table[conn->fd].flags.open' - Fix SEGFAULT parsing malformed adaptation service configuration - Fix ConnStateData::In::maybeMakeSpaceAvailable() logic - Do not override user defined -std option - Do not allow low-level debugging to hide important/critical messages - Do not make bogus recvmsg(2) calls when closing UDS sockets - Support unified EUI format code in external_acl_type Changes to squid-3.5.19 (09 May 2016): - Regression Bug 4515: interception proxy hangs Changes to squid-3.5.18 (06 May 2016): - Bug 4510: stale comment about 32KB limit on shared memory cache entries - Bug 4509: EUI compile error on NetBSD - Bug 4501: HTTP/1.1: normalize Host header - Bug 4498: URL-unescape the login-info after extraction from URI - Bug 4455: SegFault from ESIInclude::Start - Prevent Squid forcing -b 2048 into the arguments for sslcrtd_program - Fix TLS/SSL server handshake alert handling Changes to squid-3.5.17 (20 Apr 2016): - Regression Bug 4480: logformat [.width_max] - Regression Bug 4481: varyEvaluateMatch: Oops. Not a Vary match on second attempt - Bug 4495: Unknown SSL option SSL_OP_NO_TICKET - Bug 4493: theObject->sharedMemorySize() == theSegment.size() exception - Bug 4483: ./configure garbles -Og option in CFLAGS - Bug 4482: Solaris GCC 5.2 warning in src/ip/Intercept.cc - Bug 4468: NotNode (!acl) naming: Terminate the name before strncat(name). - Bug 4465: Header forgery detection leads to crash - Bug 2460 partial: workaround deferred reads on shutdown and restart - cachemgr.cgi: use dynamic MemBuf for internal content generation - ESI: Fix several element construction issues - TLS: Fix Handshake Error: ccs received early - TLS: Add chained and signing cert to peek-then-bumped connections - Fix some startup/shutdown crashes Changes to squid-3.5.16 (02 Apr 2016): - Bug 4476: Removed duplicated #include lines - Bug 4452: squid -z segfaults with ufs - Bug 4447:FwdState.cc:447 "serverConnection() == conn" assertion - Bug 4423: adding stdio: prefix to cache_log directive produces FATAL error - Bug 4409: compile error when two Heimdal libraries are installed - Bug 2831: Cache-control: max-age not sent on TCP_IMS_HIT/304 - pinger: Fix buffer overflow in Icmp6::Recv - pinger: Fix select(2) to actually use max_fd - pinger: drop capabilities on Linux - Fix memory leak of HttpRequest objects - Fix memory leak when the cache of sslcrtvalidator_program is disabled via ttl=0 - Fix assertion failed: Write.cc:41: "!ccb->active()" - Fix crash on shutdown while cleaning up idle ICAP connections - RFC 7725: Add registry entry for 451 status text - ... and some build issues Changes to squid-3.5.15 (23 Feb 2016): - Bug 3870: assertion failed: String.cc: 'len_ + len <65536' in ESI::CustomParser - Fix multiple assertion on String overflows - Fix unit test errors on MacOS - Better handling of huge response headers. Fewer incorrect "Bug #3279" messages. - Log noise reduction for eCAP Changes to squid-3.5.14 (16 Feb 2016): - Bug 4437: Fix Segfault on Certain SSL Handshake Errors - Bug 4431: C code is not compiled with CFLAGS - Bug 4418: FlexibleArray compile error with GCC 6 - Bug 4378: assertion failed: DestinationIp.cc:60: 'checklist->conn() && checklist->conn()->clientConnection != NULL' - Fix invalid FTP connection handling on blocked content - Fix handling of shared memory left over by Squid crashes or bugs - Fix mgr:config report 'qos_flows mark' output - Fix compile error in CPU affinity - Fix %un logging external ACL username - Avoid more certificate validation memory leaks - ... and some documentation updates Changes to squid-3.5.13 (06 Jan 2016): - Bug 4397: DragonFly BSD, POSIX shared memory is implemented as filepath - Bug 4387: Kerberos build errors on Solaris - TLS: Support Ephemeral Elliptic Curve Diffie-Hellman (EECDH) key exchange - TLS: Complete certificate chains using external intermediate certificates - Avoid memory leaks when an X.509 certificate validator is used with SslBump - Fix connection retry and fallback after failed server TLS connections - Fix GnuTLS detection via pkg-config - Fix startup crash with a misconfigured (too-small) shared memory cache - ... and some documentation updates Changes to squid-3.5.12 (28 Nov 2015): - Bug 4374: refresh_pattern config parser (%) - Bug 4373: assertion 'calloutContext->redirect_state == REDIRECT_NONE' - Bug 4228: links with krb5 libs despite --without options - Fix SSL_get_certificate() problem detection - Fix TLS handshake problem during Renegotiation - Fix cache_peer forceddomain= in CONNECT - Fix status code-based HTTP reason phrase for eCAP-generated messages - Fix build errors in cpuafinity.cc - ... and several documentation updates Changes to squid-3.5.11 (01 Nov 2015): - Bug 3574: crashes on reconfigure and startup - Bug 4347: compile errors with LibreSSL 2.3 - Bug 4281: copy-paste typos in src/tools.cc - Bug 4279: No response from proxy for FTP-download of non-existing file - Bug 4188: Bumping intercepted SSL connections does not work on Solaris - Fix incorrect authentication headers on cache digest requests - Fix connection stats, including %getConn())' - Fix assertion MemBuf.cc:380: "new_cap > (size_t) capacity" in SSL I/O buffer - Fix assertion errorpage.cc:600: "entry->isEmpty()" - Fix comm_connect_addr on failures returns Comm:OK - Fix missing external ACL helper notes - Fix "Not enough space to hold server hello message" error message - Fix segmentation fault inside Adaptation::Icap::Xaction::swanSong - Prevent unused ssl_crtd helpers being run - ... and some code cleanup and portability updates - ... and several documentation updates Changes to squid-3.5.4 (01 May 2015): - Bug 4234: comm_connect_addr uses errno incorrectly - Bug 4231: fd_open() not correctly handling UDS socket descriptions - Bug 4226: digest_edirectory_auth: found but cannot be built - Bug 4198: assertion failed: client_side.h:364: "sslServerBump == srvBump" - Bug 3775: Disable HTTP/1.1 pipeline feature for pinned connections - Fix require-proxy-header preventing HTTPS proxying and ssl-bump - Fix Negotiate/Kerberos authentication request size exceeds output buffer size - Fix SQUID_X509_V_ERR_DOMAIN_MISMATCH errors while accessing sites with valid certificates - Add server_name ACL matching server name(s) obtained from various sources - Add Kerberos support for MAC OS X 10.x - Support for resuming TLS sessions - ... and some portability and compile fixes - ... and several documentation updates - ... and all fixes from squid 3.4.13 Changes to squid-3.5.3 (28 Mar 2015): - Regression Bug 4213: negotiate_kerberos_auth: freeing non-dynamic memory - Regression Bug 4206: Incorrect connection close on expect:100-continue - Bug 4204: ./configure does not abort when required helpers cannot be built - Bug 3805: support shared memory on MacOS X in Mem::IPC::Segment - Bug 2907: high CPU usage on CONNECT when using delay pools - basic_getpwnam_auth: fail authentication on crypt() failures - basic_nis_auth: fail authentication on crypt() failures - ext_kerberos_ldap_group_acl: Heimdal support improvements - ext_wbinfo_group_acl: Perl 5.20 support - ... and several compile issues Changes to squid-3.5.2 (18 Feb 2015): - Regression Bug 4176: Digest auth too many helper lookups - Regression Bug 4180: not-fully-initialized data member in ACLUserData - Bug 4172: Solaris broken krb5-config - Bug 4073: Cygwin compile errors - Bug 3919: remove several never-true / never-false comparisons - HTTPS: Add missing root CAs when validating chains that passed internal checks - Fix some cbdataFree related memory leaks - Quieten CBDATA 'leak' messages - Set SNI information in transparent bumping mode - negotiate_kerberos_auth: fix krb5.conf backward compatibility - Fix memory leaks in cachemgr.cgi URL parser - Fix sslproxy_options in peek-and-splice mode - ... and fix several portability and build issues - ... and some documentation updates - ... and all fixes from squid 3.4.11 Changes to squid-3.5.1 (13 Jan 2015): - Fix handling of invalid SSL server certificates when splicing connections - basic_smb_lm_auth: Simplified MSNT basic auth helper - squidclient: Fix -A and -P options - ... and several portability fixes - ... and all fixes from squid 3.4.11 - ... and a lot of documentation updates Changes to squid-3.5.0.4 (21 Dec 2014): - Bug 3826: pt 2: Provide a systemd .service file for Squid - Support http_access denials of SslBump "peeked" connections. - Fix DONT_VERIFY_DOMAIN ssl flag - Fix peek-and-splice mode: certificate validation for domain mismatched errors - negotiate_kerberos_auth: MEMORY keytab and replay cache support - ... and some documentation updates - ... and a large amount of code polishing (non-logic changes) Changes to squid-3.5.0.3 (09 Dec 2014): - Bug 4146: workaround SSL Bump crash on Linux - Bug 4135: Support \-escaped characters in regex patterns - Bug 4131: SIGSEGV at store.cc:962 content_length > store_maxobjsize - Fix delay_parameters parsing - HTTP/2: handle 'PRI' method found in HTTP/1.x traffic - ... and all changes from squid 3.4.10 - ... and a lot of documentation updates Changes to squid-3.5.0.2 (31 Oct 2014): - Fix FTP socket opening during reconfigure - ... and all changes from 3.4.9 - ... and some build errors in rarely used code - ... and several documentation updates Changes to squid-3.5.0.1 (17 Oct 2014): - Port from 2.7: redirector and logging urlgroup feature - Bug 4093: source-maintenance.sh bad perl -i option - Bug 3608: per-service name for workers UDS sockets - Bug 2554: 32-bit wrap in AUFS counters - Bug 1961 pt1: URL handling redesign - Bug 1202 pt1: documentation for refresh_pattern algorithms - Update Squid boilerplate copyright/license - Update the http(s)_port directives protocol= parameter - Update forward_max_tries to permit 25 server paths - Update Kerberos library detection and build options - Support ACLs on ftp_epsv directive - Support >32KB objects in cache_dir rock storage - Support client connection annotation by helpers via clt_conn_tag=TAG - Support native FTP Relay - Support libgnugss Kerberos library - Support libecap v1.0 - Support SSL Peek and Splice feature - Support receiving PROXY protocol version 1 and 2 - Replace --enable-ssl build option with --with-openssl - Enable -n service name command line option for all Squid builds - Enable ICAP client by default - Fix configuration file parsing bugs, related to quoted strings - Fix Windows MinGW build errors - Fix multiple TCP outgoing TOS/DiffServ bugs - Fix Cygwin /etc/resolv.conf parsing - Fix crash when sending %ssl::cert_subject to external ACL w/o certificate - Fix crash reading malformed config files - Send selected SSL version and cipher to the certificate validation helper - Validate server certificates without bumping - Add zero-copy string buffer support - Add automated squid.conf parser testing with squid -k parse - Add adaptation_service ACL - Add logformat code %tS to log transaction start time - Add logformat code %>rd to log client URL domain name - Add key_extras to proxy authentication - Add url_rewrite_extras and store_id_extras directives - Add send_hit and store_miss directives - Add collapsed_forwarding directive - Add sslproxy_cert_sign_hash directive - Add SMP SSL session cache - Add cache_peer standby connections - Add helper ext_delayer_acl - Add TCP_TUNNEL log code for CONNECT tunnels which are not SSL-bumped - Add BUILDCXX and BUILDCXXFLAGS configure options for cross-compile - Remove COSS storage in favour of Rock storage - Remove dnsserver and external DNS helper API in favour of mDNS - Remove broken mallinfo() accounting and memory tracing - Remove hierarchy_stoplist in favour of always_direct - Deprecate tag ACL type in favour of note ACL type - Deprecate urlgroup feature in favour of note ACL type - HTTP/1.1: method names are case-sensitive - HTTP/1.1: register new headers from RFC 723x - squidclient: polish and update help display - squidclient: support TLS with GnuTLS 3.1.5+ - squidclient: support verbosity levels - squidclient: --ping mode module support - url_fake_rewrite: support concurrency - storeid_file_rewrite: support concurrency - digest_file_auth: support concurrency - digest_edirectory_auth: support concurrency - digest_ldap_auth: support concurrency - ... and many error page translation updates - ... and much code cleanup and polishing Changes to squid-3.4.14 (01 Aug 2015): - Do not blindly forward cache peer CONNECT responses (CVE-2015-5400) Changes to squid-3.4.13 (01 May 2015): - Bug 4212: ssl_crtd crashes with corrupt database - ... and some documentation updates - ... and all fixes from squid 3.3.14 Changes to squid-3.4.12 (18 Feb 2015): - Bug 4066: Digest auth nonce indefinite rollover - Bug 3997: Excessive NTLM or Negotiate auth helper annotations - Fix several crashes when debugging enabled - Fix silent SSL/TLS failure on split-stack operating systems - HTTP/1.1: Stop emitting (Proxy-)Authentication-Info for Negotiate - HTTPS: Add TLS/SSL option NO_TICKET to http[s]_port - Remove dst ACL dependency on HTTP request message existence - Set cap_net_admin when Squid sets TOS/Diffserv packet values - ... and some documentation updates Changes to squid-3.4.11 (13 Jan 2015): - Bug 4164: SEGFAULT when %W formating code used in errorpages - Bug 4057: Avoid on-exit crashes when adaptation is enabled. - Bug 3760: squidclient ignores --disable-ipv6 - Bug 3754: configure doesnt detect IPFilter 5.1.2 system headers - Bug 3664: ssl_crtd fails to build on OpenSolaris/OpenIndiana/Solaris 11 - cachemgr.cgi: memory leak in request parser - Deleting first fs left psstate->servers pointing to uninitialized memory - ... and some build issues Changes to squid-3.4.10 (09 Dec 2014): - Bug 4148: external_acl_type header format does not accept the new libformat syntax - Bug 4145: squid_endian.h compile errors with OpenBSD 5.6 - Bug 4033: Rebuild corrupted ssl_db/size file - Bug 3902: Docs: external_acl_type cache hash key - Fix segmentation fault in ACL urlpath_regex - Fix bootstrap.sh dependency on SPONSORS.list - Alternate-Protocol is a hop-by-hop header - HTTP/2: Support 421 (Misdirected Request) status code Changes to squid-3.4.9 (31 Oct 2014): - Regression fix: ext_kerberos_ldap_group_acl typo in 3.4.7 update - Bug 4102: sslbump cert contains only a dot character in key usage extension - Bug 4093: source-maintenance.sh errors and warnings due to wrong tools/options - Bug 4088: memory leak in external_acl_type helper with cache=0 or ttl=0 - Bug 4024: Bad host/IP ::1 when using IPv4-only environment - Bug 3803: ident leaks memory on failure - kerberos_ldap_group/cert_tool: Remove ksh dependency - ... and some automated code style updates - ... and some documentation updates Changes to squid-3.4.8 (15 Sep 2014): - Fix off by one in SNMP subsystem - pinger: Fix various ICMP handling issues Changes to squid-3.4.7 (28 Aug 2014): - Regression Fix: Kerberos LDAP authorizing groups with principle subdomain - Bug 4080: worker hangs when client identd is not responding - Bug 3966: Add KeyEncipherment when ssl-bump substitues RSA for EC - HTTP/1.1: Ignore Range headers with unidentifiable byte-range values - SSL-bump: Use v3 for fake certificate if we add _any_ certificate extension - Enable compile-time override for MAXTCPLISTENPORTS - ntlm_sspi_auth: Fix various build errors - negotiate_wrapper: Fix build issues with non-portable vfork() - negotiate_sspi_auth: Portability fixes for MinGW - ext_lm_group_acl: Portability fixes for MinGW - ... and several minor memory leaks Changes to squid-3.4.6 (25 Jun 2014): - Regression: segmentation fault logging with %tg format specifier - Bug 4065: round-robin neighbor selection with unequal weights - Bug 4056: assertion MemPools[type] from netdbExchangeStart() - Bug 4050: segmentation fault in CommSelectEngine::checkEvents on helper response - Fix segmentation fault setting up server SSL connnection - Fix hanging Non-HTTPS connections on SSL-bump enabled port - Fix Cache Manager actions listed more than once - ... and many minor memory leaks - ... and several portability build issues - ... and some documentation updates Changes to squid-3.4.5 (02 May 2014): - Regression Bug 4051: inverted test on CONNECT payload existence - Regression Fix: order dependency between cache_dir and maximum_object_size - Fix logformat %note display - Resolve 'dying from an unhandled exception: c' Changes to squid-3.4.4.2 (23 Apr 2014): - version bump for packaging re-build with altered toolchain Changes to squid-3.4.4.1 (23 Apr 2014): - Regression Bug 4019: Cache digest exchange segmentation fault - Regression Bug 3982: EUI logging and helpers show blank MAC address - Bug 4047: Support Android builds - Bug 4043: Remove XMALLOC_TRACE and references to sbrk(2) - Bug 4041: Missing files in compat/Makefile.am - Bug 4014: Build failure with --disable-optimizations --disable-auth - Bug 3986: (partial) assertion due to incorrect error page buffer size - Bug 3955: Solaris EUI-48 lookup leaks FDs - Bug 3371: CONNECT with data sent at once loses data - C++11: Upgrade auto-detection to use the formal -std=c++11 - Crypto-NG: libnettle MD5 algorithm support - SSL-Bump: Fix Basic auth caching on bumped connections - Store-ID: Fix request URI when forwarding requests to peers - ... and fix several other build errors - ... and some documentation updates Changes to squid-3.4.4 (09 Mar 2014): - Bug 4029: intercepted HTTPS requests bypass caching checks - Bug 4001: remove use of strsep() - Bug 3186 and 3628: Digest authentication always sending stale=false for nonce - Fix stalled concurrent rock store reads - Fix helper ID number assignment - Fix build failures from CMSG related definitions - Fix build failures from libcompat unsafe.h protections - Copyright: Relicense helpers by Treehouse Networks Ltd. - ... and all bug fixes from 3.3.12 Changes to squid-3.4.3 (02 Feb 2014): - Bug 4008: HttpHeader warnOnError should be an int not a bool - Bug 4002: clang 3.4 unable to compile - Bug 3996: Malformed DNS reply leads to crash - Bug 3995: compile error on CentOS 5 with GCC 4.1.2 - Bug 3975: atomic detection cross-compilation failure - Bug 3971: "cannot aggregate mgr:client_list: cmd->profile != NULL" in SMP mode - Bug 3954: compile failure in CpuAffinity.cc - Bug 3927: tests/testRock fatal.cc required - Fix memory leak in peer Cache Digest exchange - Fix external_acl_type async loop failures - Fix destination IP address cycling - ... and a few polishing changes Changes to squid-3.4.2 (30 Dec 2013): - Regression Bug 3980: FATAL ERROR due to max_user_ip -s option - Regression Fix: \-unescaping in quoted strings from helpers - Regression Fix: URL helper API bypassing on URL containing '=' character - Bug 3985: 60s limit introduced by balance_on_multiple_ip breaks bad IP recovery - Bug 3806: Caching responses with Vary header - Bug 3498: FTP PUT assertion - WCCPv2: Fix assertion 'Cannot convert non-IPv4 to IPv4' on FreeBSD - Enable concurrency by default for SSL certificate validator - ... and fix several build errors Changes to squid-3.4.1 (09 Dec 2013): - Bug 3935: Invalid pointer dereference when peeking at origin server certificate - Bug 3589: intercepted and ICAP modified request using a cache_peer - ... and several portability fixes - ... and some documentation updates Changes to squid-3.4.0.3 (01 Dec 2013): - Bug 3941: Release notes error - Receive annotations from authentication and external ACL helpers - basic_nis_auth: Improved portability - ... and several documentation updates - ... and all bug fixes from 3.3.9, 3.3.10, 3.3.11 Changes to squid-3.4.0.2 (03 Oct 2013): - Regression Bug 3891: squid.conf parser errors in 3.4.0.1 - Regression Fix: re-disable MinGW C++11 support - Bug 3914: partial: make squidclient tool build cleanly with -Wconversion - Fix memory leak in refresh_pattern parsing - negotiate_kerberos_auth: upgrade to present group= keys - Handle NTLM helper returning OK without user= value - Add dns_multicast_local to control mDNS operation - Add --disable-arch-native build option - Display Build-Info in cache manager info report - ... and all changes from squid 3.3.9 - ... and some code and debug output polishing Changes to squid-3.4.0.1 (29 Jul 2013): - Port from 2.7: StoreURL (renamed Store-ID) support - Bug 3795: fix several mistakes in the MIB file - Bug 3793: configure: improved helper detection - Bug 3722: Invalid markup in Armenian hy ERR_ONLY_IF_CACHED_MISS - Bug 3676: Support GCC 4.7 with -Wshadow option - Bug 3643: NTLM helpers stuck in reserved state by Safari - Bug 3389: Auto-reconnect for tcp access_log - Bug 2066: squid does not do chdir() after chroot() - Fix uninitialized fields in IcapLogEntry - Fix a number of minor issues detected by Coverity Scan - Fix some potential memory leaks detected by Coverity Scan - Fix 64-bit support for Intel compiler suite (ICC) and other similar compilers - Fix ACL matching algorithm to avoid repeating tests - basic_pam_auth: Add -r option to strip NTLM/Negotiate domain from username - squidpurge: fix META TLV parsing issues - squid.conf: enforce all the directive and option names are lower-case - Support EUI on HTTPS and FTP data connections - Support OK/ERR/BH response codes from any helper - Support No-lookup flag (-n) on DNS ACLs - Support -march=native compiler optimization by default - Support forwarding intercepted but not bumped connections to cache_peers - Support IPv6 NAT interception on Linux and some BSD - Deprecate log_icap and log_access configuration directives - HTTP/1.1: improved method invalidation and cacheability detection - HTTP/1.1: support length configuration for pipeline_prefetch queue - Improved TPROXY support for OpenBSD and FreeBSD - Add storeid_file_rewrite helper to perform Store-ID rewrites from a rules file - Add all-of and any-of ACL types for grouping sets of ACL tests - Add note directive for transaction annotations - Add %note log format for transaction annotation logging - Add note ACL type for matching annotated transactions with by annotation name or value - Add kv-pair support to URL-rewrite/redirector interface - Add SSL server certificate validator interface, helper and result cache - Add SSL server certificate fingerprint ACL type - Add spoof_client_ip access control - Add pt-bz (Belize Portuguese) dialect to translations - ... and many Windows portability changes (still incomplete) - ... and many documentation changes - ... and much code cleanup and polishing Changes to squid-3.3.14 (01 May 2015): - Bug 4093: source-maintenance.sh errors and warnings due to wrong tools/options - ... and some documentation updates - ... and all fixes from squid 3.2.14 Changes to squid-3.3.13 (28 Aug 2014): - Fix segmentation fault setting up server SSL connnection - HTTP/1.1: Ignore Range headers with unidentifiable byte-range values Changes to squid-3.3.12 (09 Mar 2014): - Regression Bug 3769: client_netmask not evaluated since Comm redesign - Bug 4026: Fix SSL and adaptation_access handling of aborted connections - Bug 3969: Fix credentials caching for Digest authentication - Bug 3806: Caching responses with Vary header - Fix umask default on crash report generated email - Fix pthread library detection on FreeBSD 10 - Avoid assertions on Range requests that trigger Squid-generated errors. Changes to squid-3.3.11 (01 Dec 2013): - Regression Bug 3936: error-details.txt parse error with OpenSSL since 3.3.9 - Bug 3972: Segfault when getting the deny_info page ID after a reconfigure - Bug 3970: max_filedescriptors disabled due to missing setrlimit - Bug 3967: ipc/Kid.cc compilation failure: 'time' was not declared in this scope - Bug 3960: DEAD cache_peer are not revived - Bug 3956: xstrndup: tried to dup a NULL pointer - Bug 3906: Filedescriptor leaks in SNMP - Bug 3782: Digest authentication not obeying nonce_max_count - HTTP/1.1: Make header parser obey relaxed_header_parser - HTTP/1.1: Re-compute Range response content offset after an FTP response was adapted - SMP: Replace blocking sleep(3) and close UDS socket on failures - Windows: fix several compile errors Changes to squid-3.3.10 (03 Nov 2013): - Bug 3929: request_header_add not working for tunnel requests - Bug 3923: cbdata and undefined behavior due to dynamic runtime enumeration - Bug 3918: Self Test Failures on Mac OS X 10.8 - Bug 3887: tcp_outgoing_tos not working for IPv6 - Bug 3836: Fix issues with automake 1.13+ and make check - Bug 3480: StoreEntry::kickProducer() segfaults in store_client::copy() - Fix pinning hierarchy log information - Fix close idle client connections associated with closed idle pinned connections. - Fix cbdata 'error: expression result unused' errors - Avoid "hot idle": A series of rapid select() calls with zero timeout. - Append Connection:close to OPTIONS requests when icap_persistent_connections is off - ntlm_fake_auth: pass DOMAIN data to Squid in original case - kerberos_ldap_group: fix LDAP string duplication - Use IPv6 localhost nameserver on DNS configuration errors - Add cache_miss_revalidate - ... and several portability improvements Changes to squid-3.3.9 (11 Sep 2013): - Regression Bug 3077: off-by-one error in Digest header decoding - Bug 3895: fix acl_uses_indirect_client and cache_peer_access - Bug 3879: assertion failed ConnStateData::validatePinnedConnection - Bug 3863: myportname acl causes segmentation fault - Bug 3849: Duplicate certificate sent when using https_port - Bug 2287: Better fix for unsupported HTTP version handling - Bug 2112: Reload into If-None-Match - Fix several assert with side effects in ICAP/eCAP response handling - Fix myportname ACL on ICAP/eCAP transactions - Fix external ACL user:pass detail logging after adaptation - Fix SMP mgr:info report 'Largest file desc currently in use' - Handle infinite certificate validation loops caused by OpenSSL Bug 3090. - Improved compatibility with gcc 4.8, clang and icc - Show number of available filedescriptors when reserved FD changes - Sync with newest OpenSSL error codes - Register Http2-Settings header - ... and many Windows portability fixes Changes to squid-3.3.8 (13 Jul 2013): - Bug 3869: assertion failed: MemBuf.cc:272: size < capacity - Improved handling of port values in Host: header validation Changes to squid-3.3.7 (11 Jul 2013): - Bug 3297: Fix openSSL related build failures - Fix build on FreeBSD 9.x platform with clang - Protect against buffer overrun in DNS query generation Changes to squid-3.3.6 (01 Jul 2013): - Bug 3854: pt1: compile errors on AIX - Bug 3802: Fix wrong check inside Format::Format::assemble - Bug 3762: remove bogus WARNING in cache.log - Bug 3717: assertion failed with dstdom_regex with IP based URL - Bug 1991: kqueue causes SSL to hang - Ask for SSL key password when started with -N but without sslpassword_program - Make sure % 1 - Bug 3655: pinning failure breaks NTLM and Negotiate authentication - SMP: Allow a UFS cache_dir entry to coexist with a shared memory cache entry - HTTP/1.1: honour Cache-Control before Pragma:no-cache - HTTP/1.1: Cache-Control compliance upgrade - Remove obsoleted refresh_pattern ignore-no-cache option - Fix IPv6 enabled squidclient - ... and several compile fixes Changes to squid-3.2.2 (06 Oct 2012): - Regression: Make login=PASS send no credentials when none available - Regression: Handle dstdomain duplicates and overlapping names better - Bug 3661: Segmentation fault when using more than 1 worker - Bug 3660: ACLFilledChecklist::fd set with wrong fd for sslproxy_cert_error - Bug 3658: ERR_ZERO_SIZE_OBJECT propagates out even after successful retry - Bug 3648: polish String class files - Bug 3647: parsing hier_code acl fails - Bug 3626: forwarding loops on intercepted traffic - Bug 3616: retrieve client connection for ACL checks from the related HttpRequest object - Bug 3609: several RADIUS helper improvements - Bug 3605: memory leak in Negotiate authentication - Fix small memory leak in src ACL parse - Fix maximum_single_addr_tries upgrade - Fix chunked encoding on responses carrying a Content-Range header. - Do not reuse persistent connections for PUTs to avoid ERR_ZERO_SIZE_OBJECT - ... and several compile errors Changes to squid-3.2.1 (15 Aug 2012): - Bug 3605: memory leak in peer selection - Bug 3478: better default handling without -DSTRICT_ORIGINAL_DST - ... and some documentation updates Changes to squid-3.2.0.19 (02 Aug 2012): - Regression Bug 3580: IDENT request makes squid crash - Regression Bug 3577: File Descriptors not properly closed - Regression Bug 3478: Allow peer selection and connection auth on intercepted traffic - Regression Fix: Restore memory caching ability - Bug 3556 Workaround: epoll assertion failed: comm.cc:1093: isOpen(fd) - Bug 3551: store_rebuild.cc:116: "store_errors == 0" assertion - Bug 3525: Do not resend nibbled PUTs and avoid "mustAutoConsume" assertion. - Avoid bogus "Disk space over limit" warnings when rebuidling dirty ufs index - Support custom headers in [request|reply]_header_* manglers - ... and much code polishing Changes to squid-3.2.0.18 (29 Jun 2012): - Bug 3576: ICY streams being Transfer-Encoding:chunked - Bug 3537: statistics histogram leaks memory - Bug 3526: digest authentication crash - Bug 3484: Docs: sslproxy_cert_error example flawed - Bug 3462: Delay Pools and ICAP - Bug 3405: ssl_crtd crashes failing to remove certificate - Bug 3380: Mac OSX compile errors with CMSG_SPACE - Bug 3258: Requests hang when Host forgery verify fails - Bug 3186: Digest auth caches failed state without revalidating - Bug 2976: ERR_INVALID_URL for transparently captured requests when reconfiguring - Bug 2885: AIX: check and set required compiler flags - Fix ssl_crtd compile issues with libsslutil - Fix build with GCC 4.7 (and probably other C++11 compilers). - Fix double-escape of %R on deny_info redirect responses - Support status 308 Permanent Redirect - Support for TLSv1.1 and TLSv1.2 options and methods - Support passing external_acl_type credentials on ICAP - Language Updates: fr, hy, pt_BR - ... and many compile issues on Windows - ... and some minor code polish Changes to squid-3.2.0.17 (12 Apr 2012): - Bug 3527: EUI compile errors on Mac OS X 10.5.8 PPC - Bug 3509: kQueue compile error - Bug 3505: crash in CbcPointer constructor - Bug 3441: Part 3: Replace corrupted v1 swap.state with new v2 format. - Bug 3397: do not mark connection as opened until after SYN-ACK - Bug 3193: NTLM decoder truncating strings - Windows FD handling polish and some fixes - Solaris 9/10 various build fixes - ... and some more code polish Changes to squid-3.2.0.16 (07 Mar 2012): - Bug 3508: Correct DNS timeout handling. - Bug 3503: DNS PTR queries timeout due to wrong QIDs. - Bug 3497: Bad ssl_crtd db size file causes infinite loop - Bug 3490: part 1: SegFault opening FTP active data connections - Bug 3490: Crash writing Apache Common and Referer/Useragent logs - Bug 3458: Icon Serving (squid-internal-static) Broken - Bug 3457: Display TLS error details in ERR_SECURE_CONNECT_FAIL - Bug 3381: 32-bit overflow assertion in StatHist - Bug 3324: loadFromFile: parse error while reading template file - Support sslpassword_program for ssl-bump HTTP ports - Support CoAP protocol coap:// and coaps:// URL schemes in HTTP requests - Retry requests that failed due to a persistent connection race - Log '-' on requests with no Referer or User-Agent headers - ... and several fixes related to in-transit object performance - ... and some structural design changes for portability Changes to squid-3.2.0.15 (06 Feb 2012): - Bug 3472: segfault with the message 'urlParse: URL too large' - Bug 3471: segfault when %la formating code used - Bug 3449: part 3: shm_open can fail with a mangled path - Bug 3449: part 4: shm_open failed (fixing memory_cache_shared defaults) - Bug 3448: 204 response problem in adaptation chains - Bug 3447: assertion failed: CommCalls.h:150: "dp" - Bug 3461: build regression in IPFilter NAT - Bug 3413: raise cbdata lock limits - Bug 3391: forwarded_for log functionality broken - Bug 3268: Squid cannot do anything else during ufs/diskd rebuild - Bug 3268: remove wrong 'Ready to serve requests.' message - Bug 2519: ssl_bump + Authentication (LDAP Digest) issues - Disable OpenSSL SSL/TLS bug workarounds by default - Send DNS A and AAAA queries in parallel - Cache Manager migration support - Allow service of internal requests over reverse-proxy ports - Fix trimMemory for unswappable objects - ... and several build and polish fixes Changes to squid-3.2.0.14 (12 Dec 2011): - Bug 3433: Segfault closing SNMP - Bug 3420: Request body consumption races and !theConsumer exception. - Bug 3406: SSL Log Error in debug - Bug 3383: store.cc:1631: "new_status != IN_MEMORY" assertion - Bug 3383: unhandled exception: theGroupBSize > 0 - Bug 3377: assertion failed: store.cc:885: "store_status == STORE_PENDING" - Bug 3367: fix inverted check on host_strict_verify - Bug 3366: assertion comm.cc:1276: isOpen(fd) via CompositePoolNode::kickReads - Bug 3364: SNMP Orphans - Bug 3301: ERR_DNS_FAIL never shown - Bug 3150: do not start useless unlinkd - ext_session_acl: version 1.2 - Add adaptation_meta option - Add a mask on the qos_flows miss configuration value - Support intermediate CA in ssl-bump traffic certificates - Support SSL certificate failure details on error page - Fix flags for NAT intercept and TPROXY not set correctly - Fix fastCheck() default result on multi-line actions - Fix missing SMP shared memory statistics - Fix Comm::Write closing() assertion when retrying a failed UDP DNS query - ... and several other TCP and SMP support behaviour fixes - ... and many code polishing cleanups and fixed build errors - ... and several documentation polishings Changes to squid-3.2.0.13 (14 Oct 2011): - Regression Bug 3363: never_direct always 'unable to forward this request at this time' - Regression Bug 3351: FTP timeout causing "store_status == STORE_PENDING" assertion - Regression Bug 3336: reconfigure assertion 'hlp->childs.n_running > 0' - Regression fix: always_direct/never_direct failures - Regression fix: stop an SSL header file being included after --disable-ssl - Regression fix: parse HTTP list headers with embedded 8-bit characters - Bug 3355: configure setting --with-swapdir ignored - Bug 3325: option to selectively enable strict host verify checks - Bug 3337: HTTP status 200 is not accepted for deny_info - Bug 3077: '\' in url query strings cause Digest authentication to fail - Support SMP worker shared memory cache - Support SMP worker shared disk cache (rock) - ext_session_acl: version 1.1 - Fix Host verify: do not pinn destination IP if URL re-write has been done - Fix IPF interception - Fix ssl_crtd "Cannot add certificate to db" when updating expired cert - Fix ssl_crtd CertificateDB locking scheme - ... and all changes from 3.1.16 - ... and many compile and polishing fixes Changes to squid-3.2.0.12 (17 Sep 2011): - Regression Bug 3335: ICAP service is down - Regression Bug 3322: adapt:: and icap:: format codes do not parse - Regression Bug 3303: Support for non-English usernames in log files - Regression Bug 3259: assertion failed: Connection.cc:29: 'fd<0' after REVIVED PARENT - Regression: %I shows hostname on SSL error page - Regression: FTP outgoing port always 'in use' on PASV connections - Bug 3337: (partial) status 200 is not accepted for deny_info - Bug 3319: Inconsistencies in error messages - Bug 3281: pconn in-use while closing assertion - Bug 3243: Fix cases: raw-IPv6, case variant FQDN, internal request - Fixed max-stale check. Entities not exceeding max-stale were marked as stale - Adjust format code %la for intercepted connections - Log ICAP_ERR_GONE ICAP transaction outcome when ICAP initiator disappears early - Send RST packet when closing an ICAP connection after a transaction error - Support maximum field width for string access.log fields Changes to squid-3.2.0.11 (28 Aug 2011): - Bug 3243: CVE-2009-0801 Bypass of browser same-origin access control - Host: authority validation of intercepted destination IP - Host: authority validation of request URL - Host: authority validation of CONNECT tunnel destination - Preserve client destination IP in intercepted communication - Regression Bug 3316: Failed to connect to nameserver using TCP - Regression Bug 3311: segmentation fault in getMyPort() with only intercept port set - Regression Bug 3310: %getConn()) - Bug 3267: workers IPC mount points disobey --localstatedir - Bug 3248: login=NEGOTIATE sends wrong auth header to origin peers - Bug 3247: Domain from URL Stripped when going through peers - Bug 3244: wrong port for peer relayed requests - Bug 3195: kerberos_ldap_group will not build without kerberos - Bug 2862: add http(s):// support to cache manager - kerberos_ldap_group: several fixes to -S option - ssl_crtd: Add man(8) file - ... and several pieces of code cleanup and polishing. - ... and most bug fixes and updates from 3.1.14 and 3.1.15 Changes to squid-3.2.0.9 (18 Jun 2011): - Bug 3159: delay pools --disable-auth compile problems - HTTP/1.1: Support multiline quoted-string header fields - HTTP/1.1: Send 505 Unsupported Version on mangled version codes - Support configurable and translated SSL error details messages - Add log format codes for split client/server views of HTTP request line - Major upgrade of TCP connection handling - Support split-stack IPv6 to servers - Support persistent connections with tcp_outgoing_address/tcp_outgoing_tos - Optimized persistent connection handling - Optimized FTP data connection handling - Optimized TCP failure recovery - ... and all bug fixes and updates from 3.1.12.3 - ... and many code polish, documentation and translation cleanups Changes to squid-3.2.0.8 (30 May 2011): - Bug 3214: "helperHandleRead: unexpected read from ssl_crtd" errors. - Bug 3043: Properly detect Iphlpapi.h on windows - Bug 2055: Honor ICAP Max-Connections - Fix NTLM/Negotiate reply auth PASSTHRU to peers - Support SSL SNI to origin servers - Add %EXT_LOG and %EXT_TAG external_acl_type format options - Add %b tag for proxy listening port display in error pages - Optimize base64 encoding/decoding - Require libcap before enabling netfilter MARK support - Require libtool 2.2 - Bundle pkg.m4 from pkg-config 0.25 for OS without pkg-config - ... and all bug fixes and updates from 3.1.12.2 - ... and some documentation and code polishing Changes to squid-3.2.0.7 (19 Apr 2011): - Regression fix: NTLM and Negotiate auth assertion "RefCountCount() == 2" - Regression fix: icons/ FHS compliance - Regression fix: Startup aborts with URL error when --disable-htcp - Bug 3192: comm.cc:216: "fd_table[fd].halfClosedReader != NULL" - Add negotiate_wrapper_auth version 1.0.1 - Fixed %dt logging in the presence of REQMOD - Fixed chunked request forwarding in ICAP REQMOD presence - ... all bug fixes and updates from 3.1.12.1 - ... many code polishings and display cleanups Changes to squid-3.2.0.6 (04 Apr 2011): - Regression fix: upgrade existing icons - Regression fix: dont crash when accessing an SSL certificate with errors - Regression fix: prevent stdio log module segfaults on rotate - Regression fix: shutdown properly even if a worker process crashes on exit - Regression Bug 3159: (partial fix) ICAP and --disable-auth compile problems - Bug 3170: "Unsupported or unconfigured/inactive proxy-auth scheme" on shutdown - Bug 3105: malformed Proxy-Authorization leaks memory - Bug 3007: CONNECT to cache_peer returns 000 status code - Bug 2885: Compile errors on AIX - Support parameterized Cache Manager queries - Support libecap v0.2.0; fixed eCAP body handling and logging - Support dynamic adaptation plans that cover multiple vectoring points - Support %D details for documented OpenSSL errors - Support logging of all transactions including those with uncertain status or no sent response - Updrate negotiate_kerberos_auth to version 3.0.4sq - Update ext_kerberos_ldap_group_acl to version 1.3.0sq - Update ext_edirectory_userip_acl to version 2.1 - Convert dns_timeout and dns_retransmit_interval directives to use millisecond resolution - Change the default dns_timeout value from 2 minutes to 30 seconds - Fix TCP log stream flushing on every line - ... all bug fixes and updates from 3.1.12 - ... a great many compiler portability fixes - ... many code polishings and display cleanups Changes to squid-3.2.0.5 (12 Feb 2011): - Regression Fix: profiler should not be built by default - Regression Bug 3081: assertion failed: AsyncCallQueue - Regression Bug 2948: Requests for FTP active downloads cause failed assertion - Bug 3089: FTP command output overrides directory listing - Bug 2870: --disable-auth does not work - Bug 2586: multiple memory leaks during reconfigure - Bug 2581: FTP directory listing sometimes fails - Port from 2.7: maximum staleness limits - HTTP/1.1: Support RFC 5861 Cache-Control: stale-if-error option - HTTP/1.1: Support configurable status codes for deny_info - Support upcoming "fresh message creation" eCAP API - Aggregate SNMP responses when using SMP with multiple workers - Several more Solaris, Windows and ICC support fixes - ... all bug fixes and updates from 3.1.11 - ... and more code cleanup shufflings - ... and several documentation updates Changes to squid-3.2.0.4 (22 Dec 2010): - Port 2.x: cache_dir min-size setting - Bug 3059: Crash on digest auth headers with unknown nonce - Fix cachemgr reported HTTP/ICP requests/messages per minute when multiple workers used - Fix cachemgr mem-pools reporting - Add Dynamic SSL certificate generation - Add useragent, referer, combined built-in log formats - Obsolete log_fqdn directive - Obsolete useragent/referer/forward_log directives - HTTP/1.1: Send 1.1 on CONNECT responses - Updated Kerberos support for newer GSSAPI releases - Improve handling of adapted body delivery failures in REQMOD request satisfaction mode - Improve handling of early eCAP transaction failures - Various ext_edirectory_acl fixes - ... all bug and feature fixes included in 3.1.10 release - ... and a lot of code and documentation polishing Changes to squid-3.2.0.3 (07 Nov 2010): - Regression fix: SMP broke ICP outgoing IP lookup if no udp_outgoing_addr set - Regression fix: ESI processing of Surrogate filter - Bug 3091: bypassed ICAP errors are not counted as service failures - Bug 3048: "commio_has_callback(fd, IOCB_READ, ccb)" assertion. - Bug 3038: Detatch libmisc from libcompat - Bug 3028: Permit wbinfo_group.pl to authenticate Kerberos users with NT domain - Bug 3002: store initialization (-z) does not work with SMP configs - Bug 2999: v2.0 of ext_edirectory_userip_acl - Bug 2785: DNS needs to set EDNS options advertising Squid capabilities - Bug 595: Add %err_code and %err_detail logformat codes for transaction failures - HTTP/1.1: support If-Match and If-None-Match requests - HTTP/1.1: forward 1xx control messages to clients that support them - HTTP/1.1: send Age:0 header even if it may break IE5 - HTTP/1.1: dechunk incoming requests and chunk outgoing requests - HTTP/1.1: entry is stale if request has max-age=0 - HTTP/1.1: harden quoted-string parser - Add --enable-build-info for extra "squid -v" display - Add --with-swapdir=PATH to override default /var/cache/squid - Add cpu_affinity_map directive to bind workers to CPU cores - Add Netfilter MARK support for QoS - Add upgrade process for obsolete options - Add support for RFC 2965 Set-Cookie2 / Cookie2 headers - Add support for client send bandwidth limits (a.k.a., quota or delay pool) - Fixes Eui48 support on OpenBSD - Fixes cache manager support with SMP configs - ... several documentation updates - ... all bug and feature fixes included in 3.1.9 release. - ... many more code polishes and leak removals Changes to squid-3.2.0.2 (04 Sep 2010): - Bug 3015: assertion failed: comm.cc:143: "ccb->active()" - Support rotating logs from cachemgr and squidclient - Support Kerberos authentication in squidclient - Add manual page for negotiate_kerberos_auth - Add helper ext_kerberos_ldap_group_acl to lookup Kerberos/NTLM group via LDAP - Add tool 'purge' for management of UFS/AUFS/DiskD caches (experimental) - Added log options %http::auth_user_request != NULL - Bug 3441: part 1: Minimize cache size corruption by malformed swap.state - Bug 3440: compile error in Adaptation - Bug 3420: Request body consumption races and !theConsumer exception - Bug 3370: external ACL sometimes skipping - Bug 3085: Crash when parsing esi:include - HTTP/1.1: do not add 110 and 111 Warnings to revalidated responses - Fix SSL library dependency fixes Changes to squid-3.1.18 (03 Dec 2011): - Regression: compile error in FTP Changes to squid-3.1.17 (03 Dec 2011): - Bug 3432: Crash logging FTP errors - Bug 3428: Active FTP data channel accepted twice - Bug 3423: access violation in URL parser - Bug 3422: Buffer overflow in recv-announce - Bug 3412: External ACL Uses Invalid Cache Entry - Bug 3408: Wrong header length leads to EFAULTs when creating UFS swap.log.new - Bug 3398: persistent server connection closed after PUT/DELETE - Bug 3299: dnsserver: various undefined references - Bug 3077: '\' in url query strings cause Digest authentication to fail - Bug 2910: MemBuf may grow beyond max_capacity - Bug 2619: Excessive RAM growth due to unlimited adapted body data consumption - Bug 1243: Build overrides configured AR setting - Avoid crashes when processing bad X509 common names (CN). - Support %% in external ACL format - ... and several other compile error fixes - ... and several documentation fixes Changes to squid-3.1.16 (14 Oct 2011): - Bug 3373: invalid URL in ERR_CACHE_ACCESS_DENIED - Bug 3368: Unhandled exceptions are not logged (workaround) - Bug 3326: miss_access incorrect default - Bug 3320: miss_access description confusing - Bug 3241: squid_kerb_auth cross compilation fix - Bug 3237: seq fault in free() from rfc1035RRDestroy - Bug 3190: Large HTTP POST stuck after early ICAP 400 error response - db_auth: display available DSN drivers on connect error - Updated OpenSSL 1.0.0 version checks - ... and several documentation fixes Changes to squid-3.1.15 (28 Aug 2011): - Regression fix: vhost and defaultsite causing vport to be ignored - Regression Bug 3295: broken escaping in rfc1738_do_escape - Bug #3232: fails to compile with OpenSSL v1.0.0 - Bug #3222: cache_peer name is not logging on CONNECT - Bug #3131: fd_table[fd].closing() assert from ConnStateData::noteMoreBodySpaceAvailable() - Bug #3217: "!fd_table[fd].closing()" from ServerStateData::noteMoreBodySpaceAvailable - Bug #3213: https sites (CONNECT) not open when using NTLM - Bug #3114: Memory leak in SSL certificate verify code - Bug #3107: ncsa_auth DES silently truncates passwords to 8 bytes - Bug #2662: cf_gen failure when cross compiling - Bug #2655: passing wrong the username to the url_rewrite_program - Bug #2495: ignore whitespace prefix on config lines - Bug #2051: 'default' cache_peer option does not match documentation - Bug #1842: Optimize order of tests in peerWouldBePinged() and peerHTTPOkay() - Bug #1791: timestampsSet does not validate Date: if server sends very old date - Correct parsing of large Gopher indexes - Enable negative cacheing on unknown or -1 expiry timestamp - Remove hierarchy_stoplist default value - Migrate cf_gen tool from C-style to C++ - ... and several documentation and compiler warning fixes Changes to squid-3.1.14 (04 Jul 2011): - Regression Bug 3261: Could not create a DNS socket and exit Changes to squid-3.1.13 (01 Jul 2011): - Regression Bug 3239: problems with myip/myport upgrade - Bug 3153: hung ICAP RESPMOD transactions - Update ssl_crtd to use 'OK' status inline with other helpers Changes to squid-3.1.12.3 (18 Jun 2011): - Bug 3236: Port of %oa, %= 0" - Bug 3175: IPv6 PTR lookup crashes on raw-IP URLs when IPv6 disabled - Bug 3173: Assertion bodyPipe!=NULL on SslBump CONNECT response writing failure - Bug 3164: Total memory info display 32-bit overflows - Bug 3155: Werror is hard-coded in libTrie build - Bug 3151: squid_kerb_auth: use autoconf LIBS instead of FLAGS for library linkage - Bug 2976: invalid URL on intercepted requests during reconfigure (workaround) - Bug 2720: comment in same line as cache/mem_replacement_policy causes error - Bug 2621: Provide request headers to RESPMOD when using cache_peer. - Bug 2330: AuthUser objects are never unlocked - Prevent CONNECT request relaying to origin servers - squidclient HTTP/1.1 compliance updates (Pragma and User-Agent headers) - squidclient: send Cache Manager password using -w - eCAP: give full Request-URI to adapters - ... and several debug and error display cleanups Changes to squid-3.1.11 (08 Feb 2011): - Bug 3149: not caching eCAP adapted body - Bug 3144: redirector program blocks while reading STDIN - Bug 3140: memory leak in error page generation - Bug 3137: RADIUS auth helper does not send identifier to RADIUS server - Bug 3115: logging segfaults if access_log is set to a directory - Bug 2968: Show the Vary: headers information in cachemgr objects report - Bug 2959: remove SAMBAPREFIX dependency - Bug 2868: icc doesn't like string literal in assert checks - HTTP/1.1: Send 307 status on deny_info redirection - HTTP/1.1: Support POST/PUT with no body - HTTP/1.1: Allow persistent connections for Mozilla/3.0 User-Agents - Support RFC 5861 Cache-Control: stale-if-error option - Add ftp_eprt directive to disable EPRT extensions in FTP - Fix external_acl_type grace=0 to obey TTL - Fix IP/FQDN cache accounting to avoid idle caches on busy servers - Prevent pipeline_prefetch misconfigurations breaking NTLM/Negotiate auth - ... and some documentation updates and corrections - ... and some portability and stability fixes Changes to squid-3.1.10 (22 Dec 2010): - Bug 3121: memory leak in DigestAuth: AuthUser object is locked twice - Bug 3113: Consuming too much memory when uploading files - Bug 3110: 'reply_body_max_size none' does not work with x-forwarded-for - Bug 3096: Consuming too much memory when delaying traffic - Bug 3091: Bypassed ICAP errors are not counted as service failures - Bug 3090: Polish FTP login error handing - Bug 3068: cache_dir capacity and usage overflows - Bug 3028: Permit wbinfo_group.pl to authenticate Kerberos users with NT domain - Bug 427: HTTP Compliance: Support If-Match and If-None-Match requests - Fix memory leak in adaptation_access - Fix /dev/poll and poll() selection priority - Fix PREFIX/var/run creation during install - Fix cachemgr http_port config report display - Add upgrade help process for obsolete options - Accept RFC 2965 Set-Cookie2 / Cookie2 headers as 'known' - HTTP/1.1: entry is stale if request has max-age=0 - HTTP/1.1: do not forward TRACE with Max-Forwards: 0 after REQMOD - Toolchain update to support newer auto-tools - ... and updated error page translations - ... and updated documentation - ... and some code optimization/simplification polish Changes to squid-3.1.9 (25 Oct 2010): - Bug 3088: dnsserver is segfaulting - Bug 3084: IPv6 without Host: header in request causes connection to hang - Bug 3082: Typo in error message - Bug 3073: tunnelStateFree memory leak of host member - Bug 3058: errorSend and ICY leak MemBuf object - Bug 3057: 64-bit Solaris 9 Squid unable to determine peer IP and port - Bug 3056: comm.cc "!fd_table[fd].closing()" assertion crash when a helper dies - Bug 3053: cache version 1 LFS support detection broken - Bug 3051: integer display overflow - Bug 3040: Lower-case domain entries from hosts and resolv.conf files - Bug 3036: adaptation_access acls cannot see myportname - Bug 3023: url_rewrite_program silently fails to rewrite on broken URLs - Bug 2964: Prevent memory leaks when ICAP transactions fail - Bug 2808: getRoundRobinParent not handling weights correctly - Bug 2793: memory statistics sometimes display wrong - Bug 2356: Port from 2.7: Solaris /dev/poll event ports support - Bug 2311: crashes with ICAP RESPMOD for HTTP body size greater than 100kb - Ensure /var/cache or jail equivalent exists on install - HTTP/1.1: delete Warnings that have warning-date different from Date - HTTP/1.1: do not remove ETag header from partial responses - HTTP/1.1: make date parser stricter to better handle malformed Expires - HTTP/1.1: improve age calculation - HTTP/1.1: reply with a 504 error if required validation fails - HTTP/1.1: add appropriate Warnings if serving a stale hit - HTTP/1.1: support requests with Cache-Control: min-fresh - HTTP/1.1: do not cache replies to requests with Cache-Control: no-store - squidclient: Display IP(s) connected to in verbose (-v) display - Fixes several issues with ICAP persistent connections - Fixes small leaks in Netdb, DNS, ICAP, ICY, HTTPS - ... and some cosmetic polishing Changes to squid-3.1.8 (04 Sep 2010): - Bug 3033: incorrect information regarding TOS - Bug 3020: Segmentation fault: nameservers[vc->ns].vc = NULL - Bug 3005,2972: Locate LTDL headers correctly (again) - Bug 2872: leaking file descriptors - Bug 2583: pure virtual method called - Hardened DNS client against packet queue attacks - Hardened HTTP request-line parser - Several HTTP/1.1 support improvements - Improved cross-compile support - .. and several internal pointer safety fixes Changes to squid-3.1.7 (23 Aug 2010): - Regression Bug 3021: Large DNS reply causes crash - Regression Bug 3011: ICAP, HTTPS, cache_peer probe IPv4-only port fixes - Regression Bug 2997: visible_hostname directive no longer matches docs - Bug 3012: deprecate sslBump and support ssl-bump spelling in http_port - Bug 3006: handle IPV6_V6ONLY definition missing - Bug 3004: Solaris 9 SunStudio 12 build failure - Bug 3003: inconsistent concepts in documentation of cache_dir - Bug 3001: dnsserver link issues - HTTP/1.1: default keep-alive for 1.1 clients (bug 3016) - HTTP/1.1: Improved Range header field validation - HTTP/1.1: Forward multiple unknown Cache-Control directives - HTTP/1.1: Stop sending Proxy-Connection header - Fix 32-bit wrap in refresh_pattern min/max values - ... and several documentation corrections. Changes to squid-3.1.6 (02 Aug 2010): - Bug 2994, 2995: IPv4-only regressions - Bug 2991: Wrong parameters to fcntl() in commSetCloseOnExec() - Bug 2975: chunked requests not supported after regular ones - Fix: 32-bit overflow in reported bytes received from next hop - Fix Libtool build regressions - Limited split-stack IPv6 support. - squid_db_auth support MD5 encrypted passwords Changes to squid-3.1.5.1 (28 Jul 2010): - Update Libtool to 2.2. - Bug 2985: search scope for digest_ldap_auth didn't work - Bug 2972: LTDL 2.2.6b compile errors - Bug 2963: Stop ignoring --with-valgrind-debug failures - Bug 2885: AIX support: several fixes - Bug 2651: crash handling NULL write callback - Fixed several memory leaks related to Range requests - Fixed Joomla DB auth handling - Fixed SASL helper build checks - Fixed several IPv6 portability problems - Updated error page translations Changes to squid-3.1.5 (02 Jul 2010): - Bug 2967: raw-IPv6 address URL with append_domain broken - Bug 2950: HTTP responses with no Date, L-M or Expires can now be cached - Bug 2943: ICAP tokens not logged when using multiple access - Bug 2937: Fails to detect chunked encoding if not given in all lower case - Bug 2903: does not send indirect X-Client-Ip in ICAP respmod - Fix free memory corruption and off-by-one error when comparing SNMP OIDs - Port from 2.7: max_filedescriptor config option - Fix persistent_connection_after_error is meant to be on by default - ... and several build errors. Changes to squid-3.1.4 (30 May 2010): - Bug 2933: Verification of the max. port number for WCCP2 dynamic service - Bug 2924: RADIUS helper compile issues - Bug 2922: Fix assertion failed: HttpHeader.cc: "Headers[id].stat.aliveCount" - Bug 2919: tcp_outgoing_address ACLs not obeying acl_uses_indirect_client - Bug 2896: Fix assertion failed: comm.cc:2063: "!fd_table[fd].closing()" - Bug 2879: pt2: 3.0 regression in headers end finding - Bug 2877: pt2: only output zero-size warning on reverse-proxy requests - Bug 2876: FD_SETSIZE override not working on all linux distributions - Bug 2810: common log format generates 2 lines of syslog - Bug 2789: Optimize unlimited memory pools, and correctly handle limits over 2GB - Bug 2753: Fall back on IPv4 if IPv6 is not present - Bug 2697: Adaptation leaks and extra requests after reconfiguration - Bug 2633: Fix Ecap::HeaderRep::value(name) fails when there is no named header field - Change LDAP helpers to default to LDAP version 3 if available - Add Joomla and Salted Hash support to squid_db_auth helper - Fixed IpAddress port printing for ports higher than 9999 - Disable chunked memory pooling by default. - ... and several build errors. Changes to squid-3.1.3 (02 May 2010): - Remove: Advertise 1.1 on replies to clients (broken chunked handling) - Fix tag ACL type not working Changes to squid-3.1.2 (01 May 2010): - Bug 2913: Fix DB auth warning in new perl version - Bug 2904: Prevent automake creating incomplete files - Bug 2899: Regression: Restore lost rfc1738_unescape() data type - Bug 2895: Regression: TPROXY2 compile errors - Bug 2879: Regression: headers end-finding - Bug 2874: Accept literal IPv6 address in icap_service URL - Bug 2860: Regression: WCCPv1 handshake - Bug 2848: Pass TCP_RST to client on early disconnect - Debian Bug 578047: Correct behaviour of --enable-ipv6 - HTTP/1.1: Advertise 1.1 on requests to servers - HTTP/1.1: Advertise 1.1 on replies to clients - AIX / UNIX build fixes - Cygwin build fixes - squidclient: -k option to test connection keep-alive or close - Improved helper build for wider compatibility - Ensure the PID file directory exists on install Changes to squid-3.1.1 (29 Mar 2010): - Bug 2873: undefined symbol - Bug 2827: assertion in authentication - Remove ufsdump binary from default builds - Remove pinger from default startups - ... and several documentation updates. Changes to squid-3.1.0.18 (14 Mar 2010): - Regression Fix: IPv4-mapped prefix, broken in 3.1.0.16 - Bug 2869: Remove unused external reference - Bug 2866: Support OpenSSL 1.0 - Bug 2813: Random unix_group crash at startup - Send HTTP1.1 compliant 417 responses - Associate external acl message with the request - Various Digest parser fixes - ... and all bug fixes from 3.0 up to 3.0.STABLE25 Changes to squid-3.1.0.17 (24 Feb 2010): - Regression Fix: Non-English error page UTF encoding - Bug 2616: reduce IdleConnList::removeFD messages - Bug 1843: multicast-siblings cache_peer option - Port from 2.7: X509 certificate alias-domain handling - Add adapted_http_access option - NTLMv2 support for fake NTLM helper Changes to squid-3.1.0.16 (01 Feb 2010): - Regression Fix: Make Squid abort on all config parse failures. - Regression Bug 2811: SNMP client/peer table OID numbering - Bug 2851: Connection pinning fails when using a peer - Bug 2850: Mismatch in hier_code enum / hier_strings array - Bug 2731: Add follow_x_forwarded_for support to ICAP - Bug 2730: Regressions in follow_x_forwarded_for since Squid-2 - Bug 2706: Set timestamps during ICAP request satisfaction. - Bug 2553: X-Forwarded-For with IPv6 address not handled correctly - Fix: WCCPv1 not connecting to router correctly - Remove obsolete RunCache/RunAccel scripts. - Add client_ip_max_connections - Add the http::>ha format code and make http::>h log original request headers - ... and all bug fixes from 3.0 up to 3.0.STABLE22 - ... and many more minor build and display annoyances. Changes to squid-3.1.0.15 (23 Nov 2009): - Regression Fix: myip ACL not accepted in config - Bug 2795: acl arp lookups including port - Bug 2794: ESI parsing fails on FreeBSD - Bug 2778: fix linking issues using SunCC - Bug 2724: eCAP build failure unless ICAP enabled - Bug 2628: Correct default PID location to PREFIX/var/run/squid.pid - Bug 2617: Performance degradation during processing list of dstdomain ACL's - Bug 2374: Support ICY / ICEcast / SHOUTcast streaming protocol. - Fix: 64-bit filesize issue in squidclient POST of large files - Fix: send correct Connection: header on intercepted replies - Support libtool 2.x - ESI libraries libexpat and libxml2 now optional - ESI support default enabled - Bump libcap minimum requirement to libcap 2.09+ - ARP / MAC support fixes for IPv6-mode - Add outstanding IPv6 settings to squid.conf (localnet, localhost) - ... and many additions to the background testing structure - ... and very many minor build and code cleanups for non-GCC compilers. Changes to squid-3.1.0.14 (27 Sep 2009): - Bug 2777: Various build issues on OpenSolaris - Bug 2773: Segfault in RFC2069 Digest authentication - Bug 2747: Compile errors on Solaris 10 - Bug 2735: Incomplete -fhuge-objects detection - Bug 2722: Fix http_port accel combined with CONNECT - Bug 2718: FTP sends EPSV2 on IPv4 connection - Bug 2648: stateful helpers stuck in reserved - Bug 2570: wccp2 "Here I Am" announcements not sent in memory-ony mode - Bug 2510: digest_ldap_auth uses incorrect logic with TLS - Bug 2483: bind() called before connect() - Bug 2215: config file line length limit (extended to 2 KB) - Support Accept-Language: * wildcard - Support autoconf 2.64 - Support TPROXY for IPv6 traffic (requires kernel support) - Support TPROXY cache cluster behind WCCPv2 - Correct ESI support to work in multi-mode Squid - Add 0.0.0.0 as an to_localhost address - DiskIO detection fixes and use optimal IO in default build. - Correct peer connect-fail-limit default of 10 - Prevent squidclient sending two Accept: headers - ... all bug fixes from 3.0.STABLE19 - ... and many more documentation fixes Changes to squid-3.1.0.13 (04 Aug 2009): - Bug 2723 regression: enable PURGE requests if PURGE method ACL is present. - Fix one more internal profiler error - Language Updates: Italian, Russian - Language Updates: Add many more aliases - Add Copyright document for errors/ content - ... all bug fixes from 3.0.STABLE18 - ... and several code polishing cleanups Changes to squid-3.1.0.12 (27 Jul 2009): - Bug 2716: Chunked request Signed/Unsigned build error - Bug 2674: Remove limit on HTTP headers read. - Bug 2620: Invalid HTTP response codes causes segfault - Fix FTP EPSV negotiation parser. - Fix Via string when leak checking is enabled (valgrind etc) - ... and several documentation and testing additions Changes to squid-3.1.0.11 (19 Jul 2009): - Bug 2087: Support adaptation sets and chains - Bug 2459: dns error message broken when error handling delayed - Support ICAP Retry - Support ICAP retries based on the ICAP responses status code - Support logging ICAP - Support logging total DNS wait time - Support logging response times of adaptation transactions - General logging enhancements - Dynamically form chains based on ICAP X-Next-Services header - Support cross-transactional ICAP header exchange - ... and much adaptation polish and improvements Changes to squid-3.1.0.10 (18 Jul 2009): - Bug 2680: Regression Crash after rotate with no helpers running - Bug 2695: Regression in WCCPv2 L2 mask assignment - Bug 2707: Regression in FTP anonymous auth - Bug 422, 2706: RFC 2616 Date header requirements - Bug 1087: ESI processor not quoting attributes correctly. - Bug 1338: File prefetches aborted despite range_offset - Bug 2080: wbinfo_group.pl - false positive under certain conditions - Bug 2092: select loop 32-bit call counter overflows - Bug 2127: delay pools class 4 crashes with ntlm auth - Bug 2611: document fast/slow acl types - Bug 2614: Potential loss of adapted body data from eCAP adapters - Bug 2658: Missing TextException copy constructor - Bug 2659: String length overflows on append, leading to segfaults - Bug 2699: Build failure NTLM smb_lm helper - Bug 2709: TRANSLATIONS not installed - Bug 2710: squid_kerb_auth non-terminated string - Delay pools 64-bit buckets and IPv6-polish - Break forwarding loops for "transparent" or "intercept" http_ports. - Add --disable-translation option to detatch .po from error negotiation - Add squidclient man(1) page - Add localhost to default permitted networks - http_port allow-direct option to allow direct forwarding in accelerator mode - ... and many testing infrastructure updates Changes to squid-3.1.0.9 (26 Jun 2009): - Bug 2682: Add ftp_epsv control to disable EPSV support. - Bug 2665: Detach automake system from using -I. - Bug 2395: FTP auth errors not displayed - ... also several changes and bugs closed in 3.0.STABLE16 - Port from 2.7: Show local address on listening sockets - Add "tag" type acl matching tags set by external acl helpers. - Adds Language alias linker/installer/upgrade scripts - Support for GCC 4.4 - Fix false NAT lookup errors on Linux - Fix many Windows port issues - Fix squid_kerb_auth helepr install location - Better detection of IPv6 stack types - Updates Licensing information for Squid 3.1 - ... and many packaging portability build and install issues Changes to squid-3.1.0.8 (24 May 2009): - Bug 2656: Pinger dies with general protection fault - Bug 2650: configure requires epoll_ctl in libepoll when --enable-epoll used - Bug 2648: Authentificator processes deferring and don't shutdown. - Bug 2645: allow squid to ignore must-revalidate - Bug 2644: auth scheme initialization is broken - Bug 2632: Make number of reforwarding tries configurable - Bug 2628: --with-pidfile=PATH option to override DEFAULT_PID_FILE - Bug 2627: HTCP Logging - Bug 2615: Call libecap::adapter::Service::start() when finalizing config. - Bug 2589: SNMP returning no data - wrong oid decoded - Bug 2571: Squid with IPv6 fails to start on kernel without IPv6 - Bug 2559: Problem parsing /0 and /0.0.0.0 - Bug 2404: WCCP in mask mode is broken - ... also all bugs closed by 3.0.STABLE14, 3.0.STABLE15, 3.0.STABLE16-RC1 - Complete Interception multiple NAT support - Add Content-Disposition to the known headers list. - Make PEER_TCP_MAGIC_COUNT configurable - Fix pinger install location - Enable TPROXY v4 spoofing of CONNECT requests - ... and much documentation and code polishing Changes to squid-3.1.0.7 (08 Apr 2009): - Fix: several issues with ident - Add several language translations - Upgrade code testing infrastructure - Migrate much code to build as internal libraries - Support gcc 4.4 - Support doxygen 1.5.8 - ... and much code polish to make things read easier Changes to squid-3.1.0.6 (01 Mar 2009): - Regression Fix: Support HTTP/0.9 in accelerator mode - Bug 2601: Hack. Convert IPv4 netmasks to CIDR in IPv6-enabled mode - Bug 2593: Compile errors on Solaris 10 - Bug 2591: adaptation_access does not work - Bug 2588: coredump in rDNS lookup - Bug 2526: default ALLOW when no list specified. - Bug 2287: Send a 505 on requests with unsupported HTTP versions - Bug 419: Hop by Hop headers MUST NOT be forwarded - Fix external_acl_type handling of SSL certificate details - Obsolete: dependency on nss_common.h and nss.h - Support libtool2 - ... and various documentation and code polish Changes to squid-3.1.0.5 (03 Feb 2009): - Bug 2583: Fixed issue in content adaptation - Bug 2576: Make translate target obey --disable-auto-locale - Bug 2571: Add DNS failover to use IPv4-only listen when IPv6 fails. - Bug 2563: 99+% CPU Usage on FTP URL - Bug 2505, 2524, 2558: fixed several issues on connection handling - Fix several issues in request parsing - Fix memory leak from logformat parsing - Fix various ESI build errors - Make configure tests use C++ instead of C - Drop special localhost conversion RFC violation. - Add Language: Arabic - ... and various documentation and code polish Changes to squid-3.1.0.4 (23 Jan 2009): - Regression Fix: Bug 2558: rollback bug 2395 fix. - Bug 2555: Fixes to SNMP-MIB - Bug 2550: assertion comm.cc:350 !fd_table[fd].closing() - Bug 2547,2548: OSX compile errors (duplicate symbols and IPv6) - Bug 2508: comm.cc:2035 assertion fd_table[fd].closing() - Bug 2330: allow keep-alive+chunked; don't add max-age for no-cache - Polish ZPH configuration interface - Several Language Conversions to new auto-negotiate - Port from 2.7: squidclient -V and -j options for HTTP/1.1 and 0.9 testing - Fix: Pconn not being used when they should. - Fix: Fix pinger immediate shutdowns - Fix: Untangle CacheManager reports from log_fqdn - ... and all bugs fixed for 3.0.STABLE12 - ... and many code polish and optimization fixes. Changes to squid-3.1.0.3 (5 Dec 2008): - Regression Fix: StoreIOBuffer patch removed. - Regression Fix: build issues with 3.1.0.2 bundle - Security Bug 2526: default ALLOW when no list specified - Bug 2525: encoding error on error pages - Bug 2424: slow file descriptor leak - Bug 2527: ICAP compile error on g++ 4.3.2 - Bug 2523: bad assertion left in from debug - Bug 2395: FTP Auth errors and others not displayed - Update squid_kerb_auth to 1.0.5 with better Squid integration. - Fix cache_peer forcedomainname= option - ... and many other minor fixes Changes to squid-3.1.0.2 (9 Nov 2008): - Bug 2516: error page templates not properly installed - Bug 2500: Solaris build issues - Fixes FreeBSD build issues - Release Notes completed - Languages: new Russian, Japanese, Chinese, and general updates - ... and other minor fixes Changes to squid-3.1.0.1 (27 Oct 2008): - Bundled ntlm_auth helper renamed (see Release Notes before changing anything) - peername ACL added for matching against a named peer destination - configure option --with-logdir= added to select log files location - squid_kerb_auth helper updated to 1.0.3 release - Bug #740: allow external acl's to use reply headers in format - Bug #2379: obsolete dns_testnames option - Code test infrastructure expanded to configuration testing - Policy changes to negative_ttl, cache deny QUERY, refresh_pattern to bring their defaults up to RFC 2616 requirements. - Large increase in RFC 2616 standard compliance (ongoing) - squid.conf cleanups for minimal config - Connection Pinning ported from 2.6 for NTLM passthru authentication - eCAP internal adaptation module support - Localization and CSS display control of error pages - Added semi-automatic documentation of source code - Added TE chunked encoding decoder to workaround broken HTTP/1.1 servers - HTCP improvements ported from 2.7 adding HTCP CLR requests - IPv6 (Internet Protocol version 6) support - ICMPv6 (Internet Control Message Protocol version 6) support - FTP agent now supports EPSV/EPRT commands - DNS internal resolver now supports AAAA and CNAME records - SNMP peer and client tables now support IPv6 - SNMP peer table supports named peers with multiple entries per IP - SslBump: Squid-in-the-middle decryption and encryption of straight CONNECT and transparently redirected SSL traffic, using configurable client- and server-side certificates. While decrypted, the traffic can be inspected using ICAP. - TPROXY version 4.1 support - IPFW and Netfilter interception methods may now both be built in one binary. - ZPH Quality of Service patch now integrated - Null store now fully obsoleted and removed - Unknown request methods all supported - Follow_x_forwarder_for ported from 2.6 - Bug #2223: Follow XFF extensions added - ... and many code and documentation cleanups Changes to squid-3.0.STABLE26 (28 Aug 2011): - Regression: header_replace for reply headers - Bug 3183: Invalid URL accepted with url host part of only '@'. - Bug 3107: ncsa_auth DES silently truncates passwords to 8 bytes - Bug 3056: comm.cc "!fd_table[fd].closing()" assertion from helperServerFree - Bug 2991: Wrong parameters to fcntl() in commSetCloseOnExec() - Bug 2933: Verification of the max. port number for WCCP2 dynamic service - Bug 2922: Fix assertion failed: HttpHeader.cc: "Headers[id].stat.aliveCount" - Regression Bug 2899: Restore lost rfc1738_unescape() data type - Regression Bug 2879: headers end finding - Bug 2876: FD_SETSIZE override not working on all linux distributions - Check for NULL and empty strings before calling str*cmp(). - Correct parsing of large Gopher indexes Changes to squid-3.0.STABLE25 (14 Mar 2010): - Bug 2845: Rework the http digest auth parser - Bug 2787: unknown/unexpected status code messages - Bug 2507: squid_ldap_group: Strip Domain name separated by + - Bug 2367: stale=true on digest requests with unknown nonce - ... and several other minor corrections Changes to squid-3.0.STABLE24 (13 Feb 2010): - Bug 2858: Segment violation in HTCP - Updated refresh pattern for dynamic pages Changes to squid-3.0.STABLE23 (02 Feb 2010): - Bug 2856: removing assert() required for 3.0 patch for SQUID-2010:1 - Regression Fix: Build error in Kerberos helper after library removal. Changes to squid-3.0.STABLE22 (01 Feb 2010): - Regression Fix: Make Squid abort on all config parse failures. - Bug 2787: Reduce unexpected http status to non-critical warnings. - Bug 2496: Downloading some variants in full before relaying - Bug 2452: Add upper limit to external_acl_type entries. - Removed optional kerberos/spnegohelp/ library due to licensing issues - Add client_ip_max_connections - Handle DNS header-only packets as invalid. Changes to squid-3.0.STABLE21 (22 Dec 2009): - Bug 2830: Clarify where NULL byte is in headers. - Bug 2778: Linking issues using SunCC - Bug 2395: FTP errors not displayed - Bug 2155: Assertion failures on malformed Content-Range response headers - Fix parsing and a few bugs in ACL time type - Fix RFC keep-alive compliance on intercepted replies - Improved security hardening on %nn parser - Replace several GCC-specific code snippets. Changes to squid-3.0.STABLE20 (29 Oct 2009): - Bug 2794: ESI parsing on FreeBSD - Bug 2791: assertion failed: MemBuf.cc:400: new_cap > (size_t) capacity - Bug 2779: Support GNU/kFreeBSD - Bug 2773: Segfault in RFC2069 Digest authantication - Bug 2768: squid_ldap_group argument parsing error - Bug 2761: Gopher and double HTTP response header - Bug 2735: Incomplete -fhuge-objects detection - Bug 2722: prevent CONNECT via http_port with accel - Bug 2624: Invalid response for IMS request - Bug 2510: digest_ldap_auth TLS support - Correct LINUX_CAPABILITY actions on non-Linux Changes to squid-3.0.STABLE19 (06 Sep 2009): - Bug 2745: Invalid Response error on small reads - Bug 2739: DNS resolver option ndots can't be parsed from resolv.conf - Bug 2734: some compile errors on Solaris - Bug 2648: stateful helpers stuck in reserved if client disconnects while helper busy - Bug 2541: Hang in 100% CPU loop while extacting header details using a delimiter other than comma - Bug 2362: Remove support for deferred state in stateful helpers - Add 0.0.0.0 as a to_localhost address - Docs: Improve chroot directive documentation slightly - Fixup libxml2 include magics, was failing when a configure cache was used - ... and some minor testing improvements. Changes to squid-3.0.STABLE18 (04 Aug 2009): - Bug 2728: regression: assertion failed: !eof - Bug 2732: reply_body_max_size smaller than error page loops infinitely until out of memory - Bug 2725: pconn failure if domain or client_address are unset - Bug 2648: reserved helpers not shut down after reconfigure/rotate - Bug 2462: make check should tell when cppunit is missing - Remove excess messages about headers < minimum size - Support Libtool 2.2.6 Changes to squid-3.0.STABLE17 (27 Jul 2009): - Bug 2680 regression: Crash after rotate with no helpers running - Bug 2710: squid_kerb_auth non-terminated string - Bug 2679: strsep and strtoll detection failure - Bug 2674: Remove limit on HTTP headers read. - Bug 2659: String length overflows on append, leading to segfaults - Bug 2620: Invalid HTTP response codes causes segfault - Bug 2080: wbinfo_group.pl - false positive under certain conditions - Bug 1087: ESI processor not quoting attributes correctly. - Fix: issue with AUFS/UFS/DiskD writing objects to disk cache - Several small build issues with previous release. Changes to squid-3.0.STABLE16 (15 Jun 2009): - Bug 2672: cacheMemMaxSize 32-bit overflow during snmpwalk - Bug 2481: Don't set expires: now in generated error responses - Bug 2387: The calculation of the number of hash buckets correctly - Fix infinite loop in MSNT auth helper - Fix FD_SETSIZE on FreeBSD - Fix stripping NT domain in squid_ldap_group - Fix RADIUS auth helper build - Add Translate: and Unless-Modified-Since: headers to known list - Make fakeauth handle NTLMv2 better - Better Kerberos support detection - Several Widows port fixes Changes to squid-3.0.STABLE16-RC1 (16 May 2009): - Bug 1148: Ported from 3.1: Chunked Transfer Encoding - Bug 2648: NTLM helpers not shutting down when deferred Changes to squid-3.0.STABLE15 (06 May 2009): - Regression Bug 2635: Incorrect Max-Forwards header type - Bug 2652: 'Success' error on CONNECT requests - Bug 2625: IDENT receiving errors - Bug 2610: ipfilter support detection - Bug 2578: FTP download resume failure - Bug 2536: %H on HTTPS error pages - Bug 2491: assertion "age >= 0" - Bug 2276: too many NTLM helpers running - Endian system and compiler fixes provided by the NetBSD project - documentation fixes provided by the Debian project Changes to squid-3.0.STABLE14 (11 Apr 2009): - Regression Fix: HTTP/0.9 in accelerator mode - Bug 1232: cache_dir parameter limited to only 63 entries - Bug 1868: support HTTP 207 status - Bug 2518: assertion failure on restart/reconfigure - Bug 2588: coredump in rDNS lookup - Bug 2595: Out of bounds memory write in squid_kerb_auth - Bug 2599: Idempotent start - Bug 2605: Prevent setsid() on helpers in daemon mode - Fix external_acl_type option parsing - Fix delay pools counters on FTP - Fix several issues with ident (some remain) - Fix performance issues with persistent connections - Fix performance issues with delay pools - Fix forwarding of OPTIONS requests - Add support for HTTP 1.1 Content-Disposition header - Add support for Windows 7, Windows Server 2008 R2 and later - ... and many small documentation updates Changes to squid-3.0.STABLE13 (03 Feb 2009): - Fix several issues in request parsing - Fix memory leak from logformat parsing - Fix various ESI build errors - ... and some documentation updates Changes to squid-3.0.STABLE12 (21 Jan 2009): - Bug 2533: Solaris (sparc) 64-bit build breaks with gcc/g++ - Bug 2542: ICAP filters break download resume - Bug 2556: HTCP fails without icp_port - Bug 2564: logformat '%tl' field not working as advertised - Port from 3.1: TestBed basic build consistency checks - Policy: Change half_closed_clients default to off - Policy: Removed -V command line option, deprecated by 2.6 - ... and several other minor code cleanups Changes to squid-3.0.STABLE11 (24 Dec 2008): - Bug 2424: filedescriptors being left unnecessary opened - Bug 2545: fault passing ICAP filtered traffic to peers - Bug 2227: Sefgaults in MemBuf::reset during idnsSendQuery - ... and some minor admin and debug cleanups. Changes to squid-3.0.STABLE11-RC1 (3 Dec 2008): - Removes patch causing cache of bad objects - Bug 2526: bad security default in ACLChecklist - Fixes regression: access.log request size tag - Fixes cache_peer forceddomainname=X option - ... and many minor documentation cleanups Changes to squid-3.0.STABLE10 (14 Oct 2008): - Bug 2391: Regression: bad assert in forwarding - Bug 2447: Segfault on failed TCP DNS query - Bug 2393: DNS requests getting stuck in idns queue - Bug 2433: FTP PUT gives bad gateway - Bug 2465: Limited DragonflyBSD support - ... and other minor bugs and documentation Changes to squid-3.0.STABLE9 (9 Sep 2008): - Policy Enforcement: COSS is unusable in 3.0 - Port from 3.1: Language Pack compatibility - Port from 2.6: Windows Support Notes - Fix several minor regressions: HTCP stats reporting cachemgr delay pool config CARP build error - Bug 2340: uudecode dependency for icons removed - Bug 2352: no_check.pl ntlm challenge fix - Bug 2426: buffer increase for kerberos auth fields - Bug 2427: squid_ldap_group codes fix - Bug 2437: peer name now shown in access.log - Add sane display of unsupported method errors - ... and various other code cleanups Changes to squid-3.0.STABLE8 (18 Jul 2008): - Port from 2.6: Support for cachemgr sub-actions - Port from 2.6: userhash peer selection method - Port from 2.6: sourcehash peer selection method - Bug 2376: round-robin balancing fixes - Bug 2388: acl documentation cleanup - Bug 2365: cachemgr.cgi HTML output encoding - Bug 2301: Regression: Log format size options - Bug 2396: Correct the opening of PF device file. - Bug 2400: ICAP accept mechanism - Bug 2411: Regression: fakeauth_auth crashes - Many fixes to the Windows support (not complete yet). - Boost error pages HTML standards. - Fixes several issues on 64-bit systems - Fixes several issues on older or stricter compilers - Linux-2.6.24/2.6.25 netfilter_ipv4.h __u32 workaround - Update Release Notes: 'all' ACL is built-in since 3.0.STABLE1 Changes to squid-3.0.STABLE7 (22 Jun 2008): - Fix several ASN issues - Fix SNMP reporting of counters - Fix round-robin algorithms - GCC 4.3 support - Netfilter v1.4.0 bug workaround - Bugs 2350 and 2323: memory issues - Bugs 2384, 951, 1566: ESI assertions - Various minor debug and documentation cleanups Changes to squid-3.0.STABLE6 (20 May 2008): - Bug 2254: umask Feature from 2.6 added - cachemgr.cgi default config file added - Several authentication bug fixes - Improved Windows Support - better DNS lookup methods for unqualified hostames - better support for 64-bit environments - Bug 2332: Crash when tunnelling - Removed the advertisement clause from BSD licenses according to the GPLv2+ changes in BSD - ... and other bugs and minor cleanups Changes to squid-3.0.STABLE5 (28 Apr 2008): - Support for resolv.conf 'domain' option - Improved URI support, including longer URI up to 8192 bytes accepted better handling of intercepted URI better port for non-FQDN URI lookups - Improved logging, including Bug 3210 fixed: incorrect timestamp format in earlier 3.0 releases. Fixed 'log_ip_on_direct' option behaviour - Support for profiling on x86 64-bit systems - .. and other bugs and minor code cleanups. Changes to squid-3.0.STABLE4 (2 Apr 2008): - Bug 2288: compile error slipped into STABLE3. Changes to squid-3.0.STABLE3 (31 Mar 2008): - Improved HTTP 1.1 support. - Improved MacOSX (Leopard) support - Bug 2206: Proxy-Authentication regression in STABLE2. - Strip Domain from NTLM usernames for use in class 4 Delay Pools - ... and other bugs and minor code cleanup Changes to squid-3.0.STABLE2 (1 Mar 2008): - Add myportname ACL for matching the accepting port name (see release notes) - Add include directive for squid.conf (see release notes) - Add ability to strip kerberos realm from usernames during Auth - License cleanup to comply with GPLv2 or later - Updated Error Pages and Translations - Updated configuration examples - Updated valgrind support for valgrind-3.3.0 - Improved support for Windows and MacOS X Leopard - Improved support for files larger than 2GB - Improved support for CARP arrays and WCCPv2 - Improved cachmgr, SNMP, and log reporting - ... and as usual Many bug fixes since STABLE 1 Changes to squid-3.0.STABLE1 (13 Dec 2007): - Major rewrite translating the code to C++, originally based on Squid-2.5.STABLE1 - Internal client streams concept for content adaptation - ICAP (Internet Content Adaptation Protocol) client support - ESI (Edge Side Includes) support added - Improved support for files larger than 2GB. - And a lot more. Most features from Squid-2.6 is supported, but not all. See the release notes for details. Squid-2 ChangeLog of versions fully ported to Squid-3 follows. Changes to squid-2.6.STABLE22 (19 October 2008) - Bug #2396: Correct the opening of the PF device file. - Make --with-large-files and --with-build-envirnment=default play nice together - Workaround for Linux-2.6.24 & 2.6.25 netfiler_ipv4.h include header __u32 problem - Make dns_nameserver work when using --disable-internal-dns on glibc based systems - Bug #2426: Increase negotiate auth token buffer size - Bug #2427: squid_ldap_group -h reports the old % codes for -f - Bug #2477: swap.state permission issues if crashing during "squid -k reconfigure" - Windows port: Fix build error using latest MinGW runtime. Older ChangeLog follows. The sections relating to Squid-2.6 is not entirely authorative for this release and mirrored here for reference only. - CARP now plays well with the other peering algorithms, and support for CARP peerings is compiled by default. Can be disabled by --disable-carp - Configuration file can be read from an external program or preprocessor. See squid.8 man page. - http_port is now optional, allowing for SSL only operation - Satellite and other high latency peering relations enhancements (Robert Cohren) - Nuked num32 types, and made type detection more robust by the use of typedefs rather than #defines. - the mailto links on Squid's ERR pages now contain data about the occurred error by default, so that the email will contain this data in its body. This feature can be disabled via the email_err_data directive. (Clemens L?ser) - COSS now uses a file called stripe and the path in squid.conf is the directory this is placed in. Additionally squid -z will create the COSS swapfile. - WCCPv2 support, including mask assignment support - HTCP support for access control and the CRL operation for purgeing of cache content - ICAP related fixes - Windows-related fixes, including Vista and Longhorn identification - Client-side parsing and some string use optimisations - Lots of off-by-one and memory leaks in corner cases have been fixed thanks to valgrind - Improved high-resolution profiling - Windows overlapped-IO and thread support added to the Async IO disk code - Improvements for handling large DNS replies Changes to squid-2.6.STABLE15 (31 Aug 2007) - The select() I/O loop got broken by the /dev/poll addition (2.6.STABLE14) - Bug #2017: Fails to work around broken servers sending just the HTTP headers - Bug #2023: Compile error with old GCC 2.x or other ANSI-C compilers before C99 - squid.conf.default updated and reorganised in more sensible groups - correct and document the syslog access_log format - Armenian error pages translation - digest_ldap_helper usage help updated - Bug #1560: ftpSendPasv: getsockname(-1,..): (9) Bad file descriptor - Improve delay pools in low traffic environment by checking timeouts at a steady 1 second interval even when there is not much activity - Don't request authentication on transparently intercepted connections - Cleanup linux capabilities for tproxy - Bug #2003: 'via' config directive doesn't affect response headers - Bug #1902: Adds Numeric Hit and invalid request counters to IP Cache - Add missing $|=1 to squid_db_auth - Bug #2050: Persistent connection dropped if cache has no Content-Length - Verify the URL on memory cache hits - Bug #2057: NTLM stop work in messengers after upgrade to 2.6.STABLE14 - Bug #1972: Squid sets peers to down state when they are in fact working. - potential segmentation fault in storeLocateVary() - Bug #2066: chdir after chroot - Windows port: Fix compiler warnings when building Squid as application (not Windows service mode) - Spelling correction of received Changes to squid-2.6.STABLE14 (15 Jul 2007) - squid.conf.default cleanup to have options in their proper sections. - documentation correction in the refresh_pattern ignore-auth option - URI-escaping not uses the recommended upper-case hex codes - refresh_pattern min-age 0 correted to really mean 0, and not 1 second - Always use xisxxxx() Squid defined macros instead of ctype functions. - Kerberos SPNEGO/Negotiate helper for the negotiate scheme - Database basic auth helper using Perl DBI to connect to most SQL DBs - Solaris /dev/poll network I/O support - configure fixes to make cross compilation somewhat easier - Removed incorrect -a reference from http_port documentation - Bug #1900: Double "squid -k shutdown" makes Squid restart again - Bug #1968: Squid hangs occasionally when using DNS search paths - Novell eDirectory digest auth helper (digest_edir_auth) - Bug #1130: min-size option for cache_dir - POP3 basic auth helper querying a POP3 server - Cosmetic squid_ldap_auth fixes from Squid-3 - Bug #1085: Add no-wrap to cache manager HTML tables - Automatically restart if number of available filedescriptors becomes alarmingly low, preventing a situation where Squid would otherwise permanently stop processing requests. - Bug #2010: snmp_core.cc:828: warning: array subscript is above array bounds - Deal better with forwarding loops Changes to squid-2.6.STABLE13 (11 May 2007) - Make sure reply headers gets sent even if there is no body available yet, fixing RealMedia streaming over HTTP issues. - Undo an accidental name change of storeUnregisterAbort. - Kill an ancient malplaced storeUnregisterAbort call from ftp.c - Bug #1814: SSL memory leak on persistent SSL connections - Don't log ECONNREFUSED/ECONNABORTED accept failures in cache.log - Cosmetic fix: added missing newline in WCCPv2 configuration dump. - Ukrainan error messages - Convert various error pages from DOS to UNIX text format - Bug #1820: COSS assertion failure t->length == MD5_DIGEST_CHARS - Clarify the max-conn=n cache_peer option syntax slightly - Bug #1892: COSS segfault on shutdown - Windows port: fix undefined ECONNABORTED - Make refreshIsCachable handle ETag as a cache validator, not only last-modified - in_port_t is not portable, use unsigned short instead - Fix fs / auth / snmp dependencies - Portability: statfs() may reqire #include Changes to squid-2.6.STABLE12 (20 Mar 2007) - Assertion error on TRACE Changes to squid-2.6.STABLE11 (17 Mar 2007) - Bug #1915: assertion failed: client_side.c:4055: "buf != NULL || !conn->body.request" - Handle garbage helper responses better in concurrent protocol format - Fix kqueue when overflowing the changes queue - Make sure the child worker process commits suicide if it could not start up - Don't log short responses at debug level 1 - Fix bswap16 & bwsap32 error on NetBSD - Fix collapsed_forwarding for non-GET requests Changes to squid-2.6.STABLE10 (4 Mar 2007) - Upgrade HTTP/0.9 responses to our HTTP version (HTTP/1.0) - various diskd bugfixes - In the access.log hierarchy field log the unique peer name instead of the host name - unlinkdClose() should be called after (not before) storeDirSync() - CLEAN_BUF_SZ was defined, but never used anywhere - logging HTTP-request size - Fix icmp pinger communication on FreeBSD and other not supporing large dgram AF_UNIX sockets - Release objects on swapin failure - Bug #1787: Objects stuck in cache if origin server clock in future - Bug #1420: 302 responses with an Expires header is always cached - Primitive support for HTTP/1.1 chunked encoding, working around broken servers - Clean up relations between TCP probing and DNS checks of peers with no known addresses. - Fix a minor HTML coding error in ftp directory listings with // in the path - Bug #1875, #1420. Cleanup of refresh logics when dealing with non-refreshable content - Gopher cleanups and bugfixes - Negotiate authentication fixed again. Broken since STABLE7 by the patch for Bug #1792. - Bug #1892: COSS tries to shut down the same directory twice on exit - Bug #1908: store*DirRebuildFromSwapLog() ignores some SWAP_LOG_DEL entries - Added support for Subversion HTTP request methods MKACTIVITY, CHECKOUT and MERGE. Changes to squid-2.6.STABLE9 (24 Jan 2007) - Bug #1878: If-Modified-Since broken in 2.6.STABLE8 - Bug #1877 diskd bug in storeDiskdIOCallback() Changes to squid-2.6.STABLE8 (21 Jan 2007) - Bug #1873: authenticateNTLMFixErrorHeader: state 4. - Document the https_port vhost option, useful in combination with a wildcard certificate - Document the existence of connection pinning / forwarding of NTLM auth and a few other features overlooked in the release notes. - Spelling correction of the ssl cache_peer option - Add back the optional "accel" http_port option. Makes accelerator mode configurations easier to read. - Bug #1872: Date parsing error causing objects to get unexpectedly cached. - Cleanup to have the access.log tags autogenerated from enums.h - Bug #1783: STALE: Entry's timestamp greater than check time. Clock going backwards? - Don't update object timestamps on a failed revalidation. - Fix how ftp://user@host URLs is rendered when Squid is built with leak checking enabled Changes to squid-2.6.STABLE7 (13 Jan 2007) - Windows port: Fix intermittent build error using Visual Studio - Add missing tproxy info from the dump of http port configuration - Bug #1853: Support for ARP ACL on NetBSD - clientNatLookup(): fix wrong function name in debug messages - Convert ncsa_auth man page from DOS to Unix text format. - Bug #1858: digest_ldap_auth had some remains of old hash format - Correct the select_loops counter when using select(). Was counted twice - Clarify the http_port vhost option a bit - Fix cache-control: max-stale without value or bad value - Bug #1857: Segmentation fault on certain types of ftp:// requests - Bug #1848: external_acl crashes with an infinite loop under high load - Bug #1792: max_user_ip not working with NTLM authentication - Bug #1865: deny_info redirection with authentication related acls - Small example on how to use the squid_session helper - Bug #1863: cache_peer monitorurl, monitorsize and monitorinterval not working properly - Clarify the transparent http_port option a bit more - Bug #1828: squid.conf docutemtation error for proxy_auth digest - Bug #1867: squid.pid isn't removed on shutdown Changes to squid-2.6.STABLE6 (12 Dec 2006) - Bug #1817: Assertion failure assert(buflen >= copy_sz) in htcp.c htcpBuildAuth() - Add client source port logformat tag >p - Cleanup of transparent & accelerator mode request parsing to untangle the firewall dependencies a bit - Bug #1799: Harmless 1 byte buffer overflow on long host names in /etc/hosts - automake no longer recommends mkinstalldirs. Removed. - Only use crypt() if it's available, allowing ncsa_auth to be built on platofms without crypt() support. - Windows port documentation updates - Bug #1818: Assertion failure assert(e->swap_dirn >= 0) in fs/coss/store_dir_coss.c storeCoss_DeleteStoreEntry - Bug #1117: assertion failed: aufs/store_dir_aufs.c:642: "rb->flags.need_to_validate" - Remove extra newline in redirect message sent by deny_info http://... aclname - Bug #1805: assertion failed: StatHist.c:195: "D[i] >= 0" - Clarify the external_acl_type helper format specification and some defaults - Add support for the weight= parameter to round-robin peers - Bug #1832: Error building squid-2.6.STABLE5 using --enable-truncate - Convert snmpDebugOid to use a temporary String object instead of strcat - Document that proxy_auth also accepts -i for case-insensitive operation - Remove malloc/free of temporary buffer in time parsing routines. - Reduce memory allocator pressure by not continually allocating client-side read buffers - Accept large dates >2^31 on 64-bit platformst. Seen for example in the Google logo. - Convert the connStateData->chr single link list to a normal dlink_list for clarity. - Bug #1584: Unable to register with multiple WCCP2 routers - Fix the WCCPv2 mask assignment code to not crash as the value assignments are built. - Bug #439: Multicast ICP peering is unstable and considers most peers dead - Bug #1801: NTLM authentication ends up in a loop if the server responds with a retriable error - Bug #1839: Cosmetic debug message cleanup in peerHandleHtcpReply. - Bug #1840: Disable digest and netdb queries to multicast peers - Bug #1641: assertion failed: stmem.c:149: "size > 0" while processing certain Vary objects - Fix build errors when using latest MinGW Windows environment Changes to squid-2.6.STABLE5 (3 Now 2006) - Bug #1776: 2.6.STABLE4 aufs fails to compile if coss isn't enabled - COSS improvements and cleanups - SNMP linking issue resolved, enabling SNMP support to be build in all platforms - Bug #1784: access_log syslog results in blanks syslog lines between every entry - Bug #1719: Incorrect error message on invalid cache_peer specifications - Bug #1785: Memory leak in handling of negatively cached objects - Bug #1780: Incorrect Vary processing in combination with collapsed_forwarding - Bug #1782: Memory leak in ncsa_auth on password changes - Suppress some annoying coss startup messages raising the debug level to 2. - Clarify the external_acl_helper concurrency= change. - aioDone() could be called twice from aufs and from coss (when using AIOPS) during shutdown. - Bug #1794: Accept 00:00-24:00 as a valid time specification even if redundand and the same as 00:00-23:59 - Bug #1795: Theoretical memory leak in storeSetPublicKey - Removing port 563 from the default SSL_ports and Safe_ports ACLs - Bug #1724: Automatically enable Linux Netfilter support with --enable-linux-tproxy. - Bug #1800: squid -k reconfigure crash when using req/rep_header acls - Clarify the select/poll/kqueue/epoll configure --enable/disable options - Bug #1779: Delay pools fairness when multiple connections compete for bandwidth - Bug #1802: Crash on exit in certain conditions where cache.log is not writeable - Bug #1796: Assertion error HttpHeader.c:914: "str" - Bug #1790: Crash on wccp2 + mask assignement + standard wccp service - Silence harmless gcc compile warning. - Clean up poll memory on shutdown - Ported select, poll and win32 to new comm event framework - Windows port: Correctly identify Windows Vista and Windows Server Longhorn - Added a basic comm_select_simple comm loop only requiring minimal POSIX compliance. - Safeguard from kb_t counter overflows on 32-bit platforms Changes to squid-2.6.STABLE4 (23 Sep 2006) - Bug #1736: Missing Italian translation of ERR_TOO_BIG error page - Windows port enhancement: added native exception handler with signal emulation - Fix the %un log_format tag again. Got broken in 2.6.STABLE2 - Fix Squid crash when using %a in ERR_INVALID_REQ and ERR_INVALID_URL error messages. - Bug #212: variable %i always 0.0.0.0 in many error pages - Bug #1708: Ports in ACL accepts characters and out of range - Bug #1706: Squid time acl accepts invalid time range. - Fix another harmless fake_auth compiler warning on gcc 4.1.1 x86 - Fix an harmless snmp_core.c compiler warning on gcc 4.1.1 x86 - Bug #1744: squid-2.6.STABLE3 - fakeauth_auth crashing on certain requests - Bug #1746: Harmless off by one overrun in ncsa_auth md5 password validation - Bug #1598: start_announce cannot be disabled - Periodically flush cache.log to disk when "buffered_logs on" is set - Numerous COSS improvements and fixes - Windows port: merge of MinGW support - Windows port: Merged Windows threads support into aufs - Bug #1759: Windows port cachemgr.cgi attempts to write to file system root directory - Numerous portability fixes - Various minor statistics cleanup on 64-bit hosts with more than 4GB of memory - Bug #1758: HEAD on ftp:// URLs always returned 200 OK. - Bug #1760: FTP related memory leak - Bug #1770: WCCP2 weighted assignment - Bug #1768: Redundant DNS PTR lookups - Bug #1696: Add support for wccpv2 mask assignment - Bug #1774: ncsa_auth support for cramfs timestamps - Bug #1769: near-hit and filedescriptor usage missing in SNMP MIB - Bug #1725: cache_peer login=PASS documentation somewhat confusing - Bug #1590: Silence those ETag loop warnings - Bug #1740: Squid crashes on certain malformed HTTP responses - Bug #1699: assertion failed: authenticate.c:836: "auth_user_request != NULL" - Improve error reporting on unexpected CONNECT requests in accelerator mode - Cosmetic change to increase cache.log detail level on invalid requests - Bug #1229: http_port and other directives accept invalid ports - Reject http_port specifications using both transparent and accelerator options - Cosmetic cleanup to not dump stacktraces on configuration errors Changes to squid-2.6.STABLE3 (18 Aug 2006) - Bug #1577: assertion failed "fm->max_n_files <= (1 << 24)" on very large cache_dir. Limit number of objects stored to slightly less to avoid this. - Bug #1705: Correct error message on invalid time weekday specification - Don't attempt to guess netmask in src/dst acl specifications if none was provided. Assume it's an IP even if it ends in 0 - Bug #1665: log_format %ue, %us tags for external or ssl user id - Bug #1707: delay pools often ignored the set limit - Bug #1716: Support for recent OpenSSL 0.9.7 versions (0.9.8 always worked) - COSS fixes and performance improvements - Memory leak when reading configuration files with overlapping ACL data where squid -k parse complains. - Memory leak related to pinned connections - Show include acls unexpanded in cachemgr configuration dumps - Fixed WARNING defer handler for HTTP Socket does not call commDeferFD - Bug #1304: Downloads may hang when using the cache_dir max-size option - Optimization of network I/O - Bug #1730: make problem with --enable-follow-x-forwarded-for on Solaris - Fixed a memory leak on certain invalid requests - Bug #1733: ERR_CANNOT_FORWARD Portuguese translation update - Bug #582: ntlm fake_auth not handles non-ascii login names - New startup message indicating the type of event loop used - Bug #1602: TCP fallback on truncated DNS responses - Bug #1667: assertion failed: store.c:1081: "e->store_status == STORE_PENDING" - Bug #1723: cachemgr now works in accelerator mode Changes to squid-2.6.STABLE2 (31 Jul 2006) - WCCP2 doesn't update statCounter.syscalls.sock.sendtos counter. - Releasenotes Table of contents should use relative links without filename. - Reject HTTP/0.9 formatted CONNECT requests. - Cosmetic cleanup to use safe_free instead of xfree + manual assign to NULL - Bug #1650: transparent interception "Unable to forward this request at this time" - Bug #1658: Memory corruption when using client-side SSL certificates - Add storeRecycle; a storeIO method to delete a StoreEntry w/out deleting the underlying object. - Many COSS fixes and new coss data dumper utility for diagnostics - Bug #1669: SEGV in storeAddVaryReadOld - Many fixes in debug sections and spelling of debug messages - Don't keep client connection persistent if there was a mismatch in the response size. - Move eventCleanup debug messages to debug level 2 (was 0) - Add the missing concurrency parameters to basic and digest auth schemes - Bug #1670: assertion failure: i->prefix_size > 0 in client_side.c:2509 - Log SSL user id in the custom log User name format (%un) - Bug #1653: Username info not logged into Cachemgr active_requests statistics - Added to the redirectors interface the support for SSL client certificate - squid.conf.default cleanup to remove references to old options - Fix many filedescriptors in combination with TPROXY - Fix connection pinning in transparently intercepted connections - Bug #1679: LDFLAGS not honored in some programs. - Minor cleanup of port numbers in transparent interception or vhost + vport - Bug #1671: transparent interception fails with FreeBSD ipfw or Linux-2.2 ipchains - Bug #1660: Accept-Encoding related memory corruption - Bug #1651: Odd results if url_rewriter defined multiple times - Bug #1655: Squid does not produce coredumps under linux when started as root - Bug #1673: cache digests not served to other caches - Cleanup of Linux capability code used by tproxy - Bug #1684: xstrdup: tried to dup a NULL pointer! - Bug #1668: unchecked vsnprintf() return code could lead to log corruption - Bug #1688: Assertion failure in HttpHeader.c in some header_access configurations - Cygwin support fir --disable-internal-dns - Silence those annoying sslReadServer: Connection reset by peer errors. - Bug #1693: persistent connections broken in transparent interception mode - Bug #1691: multicast peering issues - Bug #1696: Correct WCCP2 processing of router capability info segments - Bug #1694: Assertion failure in mgr:config if using access_log_format %2GB (Bug #437) - [Cosmetic] Segmentation fault on empty proxy_auth ACLs (Bug #1414) - [Minor] Ident access lists don't work in delay_access statements (Bug #1428) - [Minor] Some clients support NTLM even if not initially negotiating persistent connections (Bug #1447) - [Medium] 504 Gateway Time-out on FTP uploads (Bug #1459) - [Medium] delay pools given too much bandwidht after "-k reconfigure" (Bug #1481) - [Cosmetic] New persistent_connection_after_error configuration directive (Bug #1482) - [Cosmetic] Hangs at 100% CPU if /dev/null is not accessible (Bug #1484) - [Minor] Fails to compile on Fedora Core 5 test 2 x86_64 (Bug #1492) - [Cosmetic] Typo in ftp.c (Bug #1507) - [Cosmetic] Error in FTP listings of files with -> in their name (Bug #1508) - [Cosmetic] With Squid-2.5 there is no more the DUPLICATE IP logging in cache.log (Bug #779) - [Minor] Fails to process long host names (Bug #1434) - [Cosmetic] Azerbaijani errors translation (Bug #1454) - [Cosmetic] misleading error message message for bad/unresolveable cache_peer name (Bug #1504) - [Cosmetic] confusing statistics on stateful helpers (NTLM auth) (Bug #1506) - [Major] connstate memory leak (Bug #1522) Changes to squid-2.5.STABLE12 (22 Oct 2005) - [Major] Error introduced in 2.5.STABLE11 causing truncated responses when using delay pools (Bug #1405) - [Cosmetic] Document that tcp_outgoing_* works badly in combination with server_persistent_connections (Bug #454) - [Cosmetic] Add additinal tracing to squid_ldap_auth making diagnostics easier on squid_ldap_auth configuration errors (Bug #1395) - [Minor] $HOME not set when started as root (Bug #1401) - [Minor] httpd_accel_single_host breaks in combination with server_persistent_connections (Bug #1402) - [Cosmetic] Setting CACHE_HTTP_PORT to configure was only partially implemented, effectively ignored. (Bug #1403) - [Minor] CNAME based DNS addresses could get cached for longer than intended (Bug #1404) - [Minor] Incorrect handling of squid-internal-dynamic/netdb exchanges in transparently intercepting proxies (Bug #1410). - [Minor] Cache revalidations on HEAD requests causing poor cache hit ratio (Bug #1411). - [Minor] Not possible to send 302 redirects via a redirector in response to CONNECT requests (bug #1412) - [Minor] Incorrect handling of Set-Cookie on cache refreshes (Bug #1419) - [Major] Segmentation fault crash in rfc1738_do_escape (Bug #1426) - [Minor] Delay pools class 3 fails on clients in network 255 (Bug #1431) Changes to squid-2.5.STABLE11 (22 Sep 2005) - [Minor] Workaround for servers sending double content-length headers (Bug #1305) - [Cosmetic] Updated Spanish error messages by Nicolas Ruiz - [Cosmetic] Date header corrected on internal objects (icons etc) (Bug #1275) - [Minor] squid -k fails in combination with chroot after patch for bug 1157 (Bug #1307) - [Cosmetic] Segmentation fault if compiled with --enable-ipf-transparent but denied access to the NAT device. (Bug #1313) - [Minor] httpd_accel_signle_host incompatible with redireection (Bug #1314) - [Minor] squid -k reconfigure internal corruption if the type of a cache_dir is changed (Bug #1308) - [Minor] SNMP GETNEXT fails if the given OID is outside the Squid MIB (Bug #1317) - [Minor] Title in FTP listings somewhat messed up after previous patch for bug 1220 (Bug #1220) - [Minor] FTP listings uses "BASE HREF" much more than it needs to, confusing authentication. (Bug #1204) - [Minor] winfo_group.pl only looked for the first group if multiple groups were defined in the same acl. (Bug #1333) - [Cosmetic] Compiler warnings on some 64-bit platforms (Bug #1316) - [Cosmetic] Removed some debug output from wb_ntlm_atuh (Bug #518) - [Cosmetic] The new --with-build-environment=... option doesn't work - [Cosmetic] New 'mail_program' configuration option in squid.conf - [Minor] Fails to compile with ip-filter and ARP support on Solaris x86 (Bug #199) - [Major] Segmentation fault in sslConnectTimeout (Bug #1355) - [Medium] assertion failed in StatHist.c:93 (Bug #1325) - [Minor] More chroot_dir and squid -k reconfigure issues (Bug #1331) - [Cosmetic] Invalid URLs in error messages when failing to connect to peer, and a few other inconsistent error messages (Bug #1342) - [Cosmetic] Fails to compile with glibc -D_FORTIFY_SOURCE=2 (Bug #1344) - [Minor] Some odd FTP servers respond with 250 where 226 is expected (Bug #1348) - [Cosmetic] Greek translation of error messages (Bug #1351) - [Major] Assertion failed store_status == STORE_PENDING (Bug #1368) - [Minor] squid_ldap_auth -U does not work (Bug #1370) - [Minor] SNMP cacheClientTable fails on "long" IP addresses (Bug #1375) - [Minor] Solaris Sparc + IP-Filter compile error (Bug #1374) - [Minor] E-mail sent when cache dies is blocked from many antispam rules (Bug #1380) - [Minor] LDAP helpers does not work with TLS (-Z option) (Bug #1389) - [Cosmetic] Incorrect store dir selection debug message on objects larger than 2Gigabyte (Bug #1343) - [Cosmetic] header_id enum misused as an signed integer (Bug #1343) - [Cosmetic] Allow leaving core dumps when started as root (Bug #1335) - [Medium] Clients could bypass delay_pool settings by faking a cache hit request (Bug #500) - [Minor] IP-Filter 4.X support (Bug #1378) - [Medium] Odd results on pipelined CONNECT requests - [Major] Squid crashing with "FATAL: Incorrect scheme in auth header" when using NTLM authentication. - [Cosmetic] Odd results when pipeline_prefetch is combined with NTLM authentication (bug #1396) - [Minor] invalid host was processed as IP 255.255.255.255 in dst acl (Bug #1394) - [Cosmetic] New --with-maxfd=N configure option to override build time filedescriptor limit test - [Minor] Added support for Windows code name "Longhorn" on Cygwin. Changes to squid-2.5.STABLE10 (17 May 2005) - [Minor Security] Fix race condition in relation to old Netscape Set-Cookie specifications - [Minor] Fails to parse D.J. Bernstein's FTP EPLF ftp listing format and PASV resposes (Bug #1252) - [Medium] BASE HREF missing on ftp directory URLs without / (Bug #1253) - [Minor security] confusing http_access results on configuration error (Bug #1255) - [Cosmetic] More robust Date parser (Bug #321) - [Minor] reload_with_ims fails to refresh negatively cached objects (Bug #1159) - [Cosmetic] delay_access description clarification (Bug #1245) - [Cosmetic] Check for integer overflow in size specifications in squid.conf (Bug #1247) - [Cosmetic] bzero is a non-standard function not available on all platforms (Bug #1256) - [Cosmetic] Compiler warnings if pid_t is not an int (Bug #1257) - [Cosmetic] Incorrect use of ctype functions (Bug #1259) - [Cosmetic] Defer digest fetch if the peer is not allowed to be used (Bug #1261) - [Minor] Duplicate content-length headers logged incorrectly or not cleaned up properly (Bug #1262) - [Cosmetic] Extend relaxed_header_parser to work around "excess data from" errors from many major web servers. (Bug #1265) - [Minor] Add HTTP headers to a netdb error messages - [Minor] Multiple minor aufs issues (Bug #671) - [Minor] Basic authentication fails with very long logins or password (Bug #1171) - [Minor] CONNECT requests truncated if client side disconnects first (Bug #1269) - [Minor] --disable-hostname-checks configure option did not work - [Cosmetic] LDAP helpers adjusted to compile with SUN LDAP SDK - [Cosmetic] aufs warning about open event filedescriptors on shutdown - [Medium] Failed to process requests for files larger than 2GB in size - [Cosmetic] rename() related cleanup - [Cosmetic] New cachemgr pending_objects and client_objects actions - [Cosmetic] external acls requiring authentication did not request new credentials on access denials like proxy_auth does. - [Cosmetic] Syslog facility now configurable via command line options. - [Cosmetic] New %a error page template code expanding into the authenticated user name. (Bug #798) - [Minor] IP-Filter 4.0 support in --enable-ipf-transparent - [Minor] Support interception of multiple ports - [Cosmetic] Allow "squid -k ..." to run even if the local hostname can not be determined (Bug #1196) - [Cosmetic] Configuration file parser now handles DOS/Windows formatted configuration files with CRLF lineendings proper. - [Minor] Unrecognized Cache-Control directives now forwarded properly (Bug #414) - [Minor] Authentication helpers now returns useable information in the %m error page macro on failed authentication (Bug #1223) - [Minor] pid file management corrected in chroot use (Bug #1157) - [Minor Security] Fix for CVE-1999-0710: cachemgr malicouse use. cachemgr.cgi now reads a config file telling which proxy servers it can administer. - [Minor] aufs statistics improvements - [Minor] SNMP bugfixes and support for SNMPv2(c) (Bug #1288, #1299) - [Minor] ARP acl documentation and cachemgr config dump corrections - [Minor] dstdomain/dstdom_regex acls now allow matching of numeric hostnames in addition to the reverse lookup of the domain name. - [Security] Internal DNS client hardened against spoofing Changes to squid-2.5.STABLE9 (24 Feb 2005) - [Medium] Don't retry requests on 403 errors (Bug #1210) - [Minor] Ignore invalid FQDN DNS responses (Bug #1222) - [Minor] cache_peer related memory leaks on reconfigure (Bug #1246) - [Cosmetic] Adjusted to build cleanly with GCC-4 (Bug #1211) - [Minor] relaxed_header_parser extended to work around even more broken web servers (Bug #1242) - [Minor] FTP gatewaying URLs cleaned up slightly, mainly to work better with Mozilla but also to improve security slightly on non-anonymous FTP. - [Minor] High characters allowed un-encoded in FTP and Gopher listings to allow the user-agent to display data in non-iso8859-1 charsets. (Bug #1220) - [Cosmetic] format fixes to silence compiler warnings on many platforms. - [Major] Assertion failures on certain odd DNS responses (Bug #1234) Changes to squid-2.5.STABLE8 (11 Feb 2005) - [Minor] 100% CPU usage on half-closed PUT/POST requests (Bug #354, #1096) - [Cosmetic] Document -v (protocol version) option to LDAP helpers - [Minor] The new req_header and resp_header acls segfaults immediately on parse of squid.conf (Bug #961) - [Minor] Failure to shut down busy helpers on -k rotate/reconfigure (Bug #1118) - [Minor] Don't use O_NONBLOCK on disk files. (Bug #1102) - [Minor] Squid fails to close TCP connection after blank HTTP response (Bug #1116) - [Minor security] Random error messages in response to malformed host name (Bug #1143) - [Minor] PURGE should not be able to delete internal objects (Bug #1112) - [Minor] httpd_accel_port 0 (virtual) not working correctly (Bug #1121) - [Minor] cachemgr vm_objects segfault (Bug #1149) - [Minor security] Confusing results on empty acl declarations (Bug #1166) - [Minor] Don't close all "other" filedescriptors on startup (Bug #1177) - [Minor] fakeauth_auth memory leak and NULL pointer access (Bug #1183) - [Security] buffer overflow bug in gopherToHTML() (Bug #1189) - [Medium security] Denial of service with forged WCCP messages (Bug #1190) - [Minor] DNS related memory leak on certain malformed DNS responses (Bug #1197) - [Minor] Internal DNS sometimes truncates host names in reverse (PTR) lookups (Bug #1136) - [Minor Security] Add sanity checks on LDAP user names (Bug #1187) - [Security] Harden Squid against HTTP request smuggling attacks - [Minor] Icon URLs fails in non-anonymous FTP directory listings is short_icon_urls is on (Bug #1203) - [Security] Harden Squid against HTTP response splitting attacks (Bug #1200) - [Medium security] Buffer overflow in WCCP recvfrom() call (Bug #1217) - [Security] Properly handle oversized reply headers (Bug #1216) - [Minor] LDAP helpers search fixed to properly ask for no attributes - [Minor] A sporadic segmentation fault when using ntlm authentication fixed (Bug #1127) - [Major] Segmentation fault on failed PUT/POST requests (Bug #1224) - [Medium] Persistent connection mismatch on failed PUT/POST request (Bug #1122) - [Minor] WCCP easily disturbed by forged packets (Bug #1225) - [Minor] Password management in ftp:// gatewaying improved (Bug #1226) - [Major] HTTP reply data corruption in certain situations involving reply headers split over multiple packets (Bug #1233) Changes to squid-2.5.STABLE7 (11 Oct 2004) - [Medium] No objects cached in ufs cache_dir type in some configurations. Issue introduced in 2.5.STABLE6 by the patch for Bug #676. (Bug #1011) - [Minor] LDAP helpers update to correct LDAP connection management and add support for literal password compare instead of binding - [Minor] A large number of queued DNS lookups for the same domain (Bug #852) - [Cosmetic] request_header_max_size configuration partly ignored (Bug #899) - [Minor] Partial hit results in TCP_HIT, not TCP_MISS. (Bug #1001) - [Cosmetic] HEAD requests may return stale information (Bug #1012) - [Cosmetic] Warn if cache_dir ufs can not create files. (Bug #918) - [Minor] case insensitive authentication (Bug #431) - [Cosmetic] Add delay pools information to active_requests. (Bug #882) - [Minor] Apparent memory leak in client_db (Bug #833) - [Minor] NTLM authentication truncated causing failures. (Bug #1016) - [Cosmetic] Grammatical corrections in squid.conf.default - [Cosmetic] Unknown %X errorpage codes incorrectly quoted. (Bug #1030) - [Medium] Segfaults and other strange crashes when using heap policies. (Bug #1009) - [Minor] Supplementary group memberships not set (Bug #1021) - [Cosmetic] ERR_TOO_BIG Portuguese translation - [Minor] external_acl does not handle newlines (Bug #1038) - [Major] NTLM authentication denial of service when using msnt_auth or fake_auth (Bug #1045) - [Medium] Memory leaks when using NTLM authentication without challenge reuse. (Bug #994) - [Minor] Temporary NTLM memory leak with challenge reuse enabled (Bug #910) - [Minor] assertion failed: "n_ufs_dirs <= Config.cacheSwap.n_configured". (Bug #1053) - [Minor] Segfault in authenticateDigestHandleReply. (Bug #1031) - [Minor] acl time fails to parse multiple time specifications (Bug #1060) - [Minor] cachemgr config dumps mixed up Range and Request-Range headers in http_header_access & replace directives. (Bug #1056) - [Minor] Content-Disposition added as a well known header (Bug #961) - [Cosmetic] Don't warn about arp acls not being supported on FreeBSD (Bug #1074) - [Cosmetic] Limit internal send/receive buffer sizes (Bug #1075) - [Medium] New acl types to match arbitrary HTTP headers. In addition the http_header_access & replace directives now support arbitrary headers and not only the well known ones. (Bug #961) - [Cosmetic] ncsa_auth now accepts Window formatted password files (Bug #1078) - [Cosmetic] Support the --program-prefix/suffix options or other configure program name transforms (Bug #1019) - [Minor] Fix race condition in CONNECT and also handle aborts of CONNECT requests in a more graceful manner. (Bug #859) - [Minor] New balance_on_multiple_ip directive to work around certain broken load balancers and optimized ipcache on reload requests (Bug #1058) - [Medium] New reply_header_max_size directive (Bug #874) - [Minor] Suspected instability on aborted PUT/POST requests (Bug #1089) - [Security] SNMP Denial of Service fix (CAN-2004-0918) Changes to squid-2.5.STABLE6 (9 Jul 2004) - Bug #937: NTLM assertion error "srv->flags.reserved" - Bug #935: squid_ldap_auth can be confused by the use of reserved characters - Helper queue warnings imprecise on the number of helpers required - squid_ldap_auth TLS mode works correctly again - Bug #940, #305: pkg-config support for finding correct OpenSSL compile flags - Bug #426: "Vary: *" is ignored - 100% CPU usage on Linux-2.2 - Version number should not include -CVS if autoconf is run - Bug #947: deny_info redirection with requested URL escaped wrongly - Bug #495: CONNECT timeout should produce a 504 or 503 - Bug #956: cache_swap_log documentation referred to swap.state by it's old swap.log name - ntlm/auth_ntlm.c(683): warning #187: use of "=" where "==" may have been intended - Bug #962: rfc1035NameUnpack: Assertion (*off) < sz failed - Bug #954: Segment violation when using a blank user name in digest authentication - Bug #943: assertion failed: errorpage.c:292: "mem->inmem_hi == 0" - Spelling corrections in configure and squid.conf.default - The meaning of ERR in digest helper protocol clarified in the squid.conf documentation - Bug #950: Spelling error in Turkish ERR_DNS_FAIL - Bug #616: Negative cached 404 replies with VARY header never matched - Bug #968: range_offset_limit -1 KB rejected as invalid syntax due to a shortcoming in the fix to bug #817 - Bug #570: Very large cache_mem values reported wrongly in cache.log - Bug #676: store_dir_select_algorithm least-load doesn't work for ufs cache_dir type - Bug #946: cacheCurrentUnlinkRequests should be a counter, not gauge - Bug #948: Show client ip in cache.log debug output - Bug #960: compilation issue on OpenBSD/m88k - Bug #969: FTP directory listing HTML DOCTYPE misread by some tools - Bug #991: dns_servers should default to localhost if no resolv.conf - Bug #717: msnt_auth documentation update - Bug #753: Segfault in memBufVPrintf on certain architectures requiring va_copy - Bug #941: Negative size in access.log on long running CONNECT requests - Bug #972: Segmentation fault after "Likely proxy abuse detected" - Bug #981: sasl_auth updated to work with SALS2 - Overflow bug in Squid's ntlm_auth helper used for transparent NTLM authentication to a NT domain without using Samba. Changes to squid-2.5.STABLE5 (1 Mar 2004): - cache.log message on "squid -k reconfigure" was slightly confusing, claiming Squid restarted when it just reread the configuration. - Bug #787: digest auth never detects password changes - Bug #789: login with space confuses redirector helpers - Bug #791: FQDNcache discards negative responses when using internal DNS - pam_auth fails on Solaris when using pam_authtok_get. Persistent PAM connections are unsafe and now disabled by default. - auth_param documentation clarifications and added default realm values making only the helper program a required attribute - Bug #795: German ERR_DNS_FAIL correction - Bug #803: Lithuanian error messages update - Bug #806: Segfault if failing to load error page - Bug #812: Mozilla/Netscape plugins mime type defined (.xpi) - Bug #817: maximum_object_size too large causes squid not to cache - Bug #824: 100% CPU loop if external_acl combined with separate authentication acl in the same http_access line - squid_ldap_group updated to version 2.12 with support for ldaps:// (LDAPv2 over SSL) and a numer of other improvements. - Bug #799: positive_dns_ttl ignored when using internal DNS. - Bug #690: Incorrect html on empty Gopher responses - Bug #729: --enable-arp-acl may give warning about net/route.h - Bug #14: attempts to establish connection may look like syn flood attack if the contacted server is refusing connections - errorpage README files included in the distribution again showing who contributed which translation - Bug #848: connect_timeout connect_timeout ends up twice the length. forward_timeout option added to address this. - Bug #849: DNS log error messages should report the failed query - Bug #851: DNS retransmits too often - Bug #862: Very frequently repeated POST requests may cause a filedescriptor shortage due to persitent connections building up - Bug #853: Sporatic segmentation faults on aborted FTP PUT requests - Bug #571: Need to limit use of persistent connections when filedescriptor usage is high - Bug #856: FTP/Gopher Icon URLs are unneededly complex and often does not work properly - Bug #860: redirector_access does not handle "slow" acls such as "dst" or "external" requiring a external lookup. - Bug #865: Persistent connection usage too high after sudden burst of traffic. - Bug #867: cache_peer max-conn=.. option does not work - Bug #868: refuses to start if pid_filename none is specified - Bug #887: LDAP helper -Z (TLS) option does not work - Bug #877: Squid doesn't follow telnet protocol on FTP control connections - Bug #908: Random auth popups and account lockouts when using ntlm - Support for NTLM_NEGOTIATE exchanges with ntlm helpers - Bug #585: cache_peer_access fails with NTLM authentication - Bug #592: always/never_direct fails with NTLM authentication - wbinfo_group update for Samba-3 - Bug #892: helpers/ntlm_auth/SMB/ fails to compile on FreeBSD 5.0 - Bug #924: miss_access restricts internal and cachemgr requests even if these are local - Bug #925: auth headers send by squidclient are mildly malformed - Bug #922: miss_access and delay_access and several other authentication related bug fixes. - Bug #909: Added ARP acl support for FreeBSD - Bug #926: deny_info with http_reply_access or miss_access - Bug #872: reply_body_max_size problems when using NTLM auth - Bug #825: random segmentation faults when using digest auth - Bug #910: Partial fix for temporary memory leaks when using NTLM auth. There is still problems if challenge reuse is enabled. - ftp://anonymous@host/ now accepted without requiring a password - Bug #594: several mime type updates (ftp:// related) - url_regex enhanced to allow matching of %00 Changes to squid-2.5.STABLE4 (15 Sep 2003): - Lithuanian error messages added to the distribution - Bug #660: segfauld if more than one custom deny_info line - cache_dir disd documentation cleanup - check open of /dev/null to avoid 100% CPU loop in badly configured chroot environments - documentation update on uri_whitespace to refer to the correct RFC - Bug #655: icmpRecv: recv: (11) Resource temporarily unavailable - Bug #683: external_acl does not wait for ident lookups to complete - aufs: Fix a minor use-after-free problem which could cause the count of opening filedescriptors to grow larger than it should - Syntax changes to make GCC-3.3 accept Squid without complaints - Warning if CARP server defined in incorrect load factor order - neighbor_type_domain documentation update - http_header_access now works when using cache peers - high_memory_warning now uses sbrk as fallback mechanism on platforms where neither mallinfo or mstats are available. - hosts_file now handles comments at the end of lines correcly - storeCheckCachable() Stats corrected for release_request and wrong_content_length. - cachePeerPingsSent MIB type corrected - unused minimum_retry_timeout directive removed - Bug #702: ERR_TO_BIG spanish translation - Bug #705: Memory leak on deny_info TCP_RESET - Code cleanup to fix compile error in httpHeaderDelById - Bug #699: Host header now forwarded exactly where it was in the original request to work around certain broken firewalls or load balancers which fail if this header is too far into the request headers. - Bug #704: Memory leak on reply_body_max_size - Bug #686: requests denied due to http_reply_access are now logged with TCP_DENIED (instead of TCP_MISS, etc). - Bug #708: ie_refresh now sends no-cache to have the reload request propagate properly in cache meshes - Bug #700: Crashes related to ftpTimeout: timeout in SENT_PASV state - Bug #709: cbdata.c:186: "c->valid" assertion due to peer digest not found - Bug #710: round-robin cache_dir selection incorrectly compares max-size. - Statistics corrections in HTTP header statitics - QUICKSTART cleanups - Bug #715: statCounter.syscalls.disk counters treated inconsistently. Now increment the counters in AUFS functions and for unlinkd. - Improvements to the (experimental) COSS storage scheme. - Bug #721: User name field in access.log sometimes blank - Bug #94: assertion failed: http.c: "-1 == cfd || FD_SOCKET == fd_table[cfd].type" - Bug #716: assertion failed: client_side.c:1478: "size > 0" - Bug #732: aufs calculates number of threads and limits wrongly - Bug #663: Username not logged into access.log in case of /407 - Bug #267: Form POSTing troubles with NTLM authentication and occationally in differen other error conditions. - Bug #736: ICP dynamic timeout algorithm ignores multicast. - Bug #733: No explicit error message when ncsa_auth can't access passwd file - Bug #267, #757: POST with NTLM stops after persistent connection timeout - Bug #742: Wrong status code on access denials if delay_access is used. Most notably 407 instead of 403 could be returned. - Bug #763: segfault if using ntlm in http_reply_access - Bug #638: assertion error if using proxy_auth in delay_access - Bug #756: segmentation fault if using ntlm proxy_auth in delay_access - The issue of reply_body_max_size limiting the size of error messages no longer applies. - external_acl_type concurrency= option renamed to children= to prepare for Squid-3 upgrades. Old syntax still accepted for the duration of the Squid-2.5 release. - number of filedescriptors rounded down to an even multiple of 64 to work around issues in certain libc implementations. - winbind helpers less noisy in cache.log on restarts/shutdown. - Squid now automatically restarts helpers if too many of them have crashed. Changes to squid-2.5.STABLE3 (25 May 2003): - Bug #573: Occational false negatives in external acl lookups - Bug #577: assertion failed: cbdata.c:224: "c->y == c" when external_acl helpers crashes - Bug #590: Squid may hang or behave oddly on shutdown while requests is being processed. - Bug #590: external acl lookups does not deal well with queue overload - cache_effective_user documentation update - cache_peer documentation update for htcp and carp - Bug #600: The example header_access paranoid setting is missing WWW-Authenticate - Bug #605: Segmentation fault in idnsGrokReply() on certain platforms - Fixes to build properly on AIX 5 - Bug #574: wb_group updated to version 1.1 to make group names case insensitive and correct a segfault issue in the helper - SNMP mib updates to make cacheNumObjCount, cacheCurrentUnlinkRequests, cacheCurrentSwapSize and cacheClients correctly report as gauges (was reporting as counters). - Woraround for --enable-ssl Kerberos issue on RedHat 9 - Bug #579: Close and repopen log files on "squid -k reconfigure" - Bug #598: squid_ldap_auth could segfault if LDAP server is unavailable - Bug #609,#612: msntauth helper fixes in dealing with large or non-existing allow/deny user files. - Bug #620: acl ident REQUIRED matches even if the ident lookup fails - Bug #432: reply_body_max_size fails with ident or proxy_auth acls and also fails to block large objects where the content-length is not known - Bug #606: Basic auth looping and gets stuck at high CPU usage when multiple proxy_auth ACLs combined in one line and login fails. - squid_ldap_auth updated with support for TLS and SSL - Bug #623: segfault if using negated external acls in certain configurations involving other acls later on the same http_access line. - Bug #622: wb_group helper update to version 1.2 to ass support for Domain-Qualified groups refering to groups in a specific domain - Bug #596: logic error in poll() error management - Bug #597: logic errors in error management - Bug #591: segmentation fault in authentication on "squid -k debug" - Bug #587: smb_auth fails on complex logins involving domain names or other odd characters - Bug #558, #587: smb_auth.pl fails on complex logins involving domain names or other odd characters - Bug #643: external_acl fails with ttl=0 due to a change introduced by the patch for Bug #553 in 2.5.STABLE2. - Bug #630: minor issues in digest authantication causing random authentication failures and incompability with many mainstream browser digest implementations due to browser qop bugs. To deal with those broken browser nonce_stricness now defaults to off, and two new digest options have been added (check_nonce_count and post_workaround) to allow workarounds to other quite bad browser bugs if needed. - Bug #644: digest authentication fails on requests with one or more comma in the requested URL - Bug #648: deny_info TCP_RESET not working. The fix for this also adds the ability to send redirects. Changes to squid-2.5.STABLE2 (Mars 17, 2003): - Contrib files added back to the distribution - Several compiler warnings fixed when using --disable-ident or --disable-http-violations - authentication can now be used in most access controls, but must in most cases first be enforced in http_access to force the user to authenticate. - cleanups in the developer bootstrap.sh process when preparing the sources. - several squid.conf.default documentation updated to correctly refer to the current names when refering to other directives - authenticate_ip_ttl documentation updates - several assertion faults and segmentation violations corrected - the RunCache/RunAccel and squid.rc scripts updated to refer to the squid binary in sbin rather than the old bin location. - squid_ldap_auth command line processing fixes when specifying the LDAP server last on the line instead of -h option - aufs data corruption bugfix - aufs performance improvement for low traffic systems - aufs stability improvements - external_acl corrected to properly deal with quoted strings - WCCPv1 bugfix to make sure the router accepts the hash assignments - "Total accounted memory" now correctly reported in cachemgr - several small memory leaks (mostly reconfigure related) - new squid.conf option to allow GET/HEAD requests with a request entity - "make uninstall" no longer removes squid.conf - cachemgr.cgi now uses POST to avoid having the cachemgr password logged in the web server logs - authentication schemes which are known to not be proxyable are now filtered out from forwarded server replies to avoid that the clients tries to use such schemes when we know for a fact it won't work - spelling corrections in various error messages - now possible to define acl values with spaces in them by using the "include file" feature - squid_ldap_group updated to 2.10 to fix compilation issues with recent (and older) OpenLDAP libraries and to make the helper deal correctly with true LDAP groups by first looking up the user DN. - Some internal code cleanups - now verifies that programs etc exists iside the chroot directory when using chroot_dir. No longer neccesary to set up a split view environment where the same paths works both inside the chroot and outside just to convince Squid that the files is actually there.. - improved memory usage reporting - --disable-hostname-checks configure option - no longer ignores double dots in host names. Any hostname with double dots is now rejected as invalid. - log_mime_hdrs no longer logs garbage if very long headers are seen. - 'select_fds_hist' object added to cachemgr 'histogram' output - pid file now unlinked when squid has really shut down, not immediately when the shutdown request is received. This allows the pid file to be monitored to determine when Squid has shut down properly - correct authentication scheme setups on some platforms or compilers - several squid.conf.default documentation updates to remove references to renamed or replaced directives by changing them to their current names. - the SSL reverse proxy support updated to allow building with OpenSSL 0.9.7 and and later. - Corrected a minor performance problem while processing HEAD replies from various broken web servers not sending a correct HTTP reply - time acls can now specify multiple times in the same acl name, like most other acl types. - winbind helpers updated to match Samba-2.2.7a and should work with Samba-2.2.6 or later (required). For compability with older Samba versions A new configure option --with-samba-sources=... has been added to allow you to specify which Samba version the helpers should be built for if different than the above versions. - Squid MIB definition syntax correction to work better with newer (and older) SNMP tools. - Fixed access.log format when logging "error:invalid-HTTP-ident" on requests where parsing the HTTP identifier (HTTP/1.0) failed. - "make distclean" no longer removes the icons, this avoids the dependency on "uudecode" to rebuild Squid after "make distclean" - User name returned by external acl lookups (external_acl_type) is now available as "ident" in later acl checks in addition to the logging in access.log. - Incorrect behaviour of Digest authentication partly corrected - it will not handle sessions, but will always enforce password correctness.. (patch submitted by Sean Burford). - Issue with persistent connections and PUT/POST request corrected Changes to squid-2.5.STABLE1 (September 25, 2002): - Major rewrite of proxy authentication to support other schemes than basic. First in the line is NTLM support but others can easily be added (minimal digest is present). See Programmers Guide. (Robert Collins & Francesco Chemolli) - Reworked how request bodies are passed down to the protocols. Now all client side processing is inside client_side.c, and the pass and pump modules is no longer used. used by Squid. - Optimized searching in proxy_auth and ident ACL types. Squid should now handle large access lists a lot more efficiently. (Francesco Chemolli) - Fixed forwarding/peer loop detection code (Brian Degenhardt) - now a peer is ignored if it turns out to be us, rather than committing suicide - Changed the internal URL code to obey appendDomain for internal objects if it needs appending. This fixes weirdnesses where a machine can think it is "foo.bar.com", and "foo" is requested. (Brian Degenhardt) - Added the use of Automake to create the Makefile.in's in the squid source tree. This will allow libtool in the future, and immediately allows better dependency tracking - with or without gcc - as well as the dist-all and distcheck targets for developers which respectively build a tar.gz and a tar.bz2 distribution, and check that what will be distributed builds. - Added TOS and source address selection based on ACLs, written by Roger Venning. This allows administrators to set the TOS precedence bits and/or the source IP from a set of available IPs based upon some ACLs, generally to map different users to different outgoing links and traffic profiles. - Added 'max-conn' option to 'cache_peer' - Added SSL gatewaying support, allowing Squid to act as a SSL server in accelerator setups. - SASL authentication helper by Ian Castle - msntauth updated to v2.0.3 - no_cache now applies to cache hits as well as cache misses - the Gopher client in Squid has been significantly improved - Squid now sanity checks FTP data connections to ensure the connection is from the requested server. Can be disabled if needed by turning off the ftp_sanitycheck option. - external acl support. A mechanism where flexible ACL checks can be driven by external helpers. See the external_acl_type and acl external directives. - Countless other small things and fixes - HTML pages generated by Squid or CacheMgr as well as the ERR documents now contain a doctype declaration so that browsers know which HTML specification the document uses. In addition to that they have a new look (background-color, font) and are valid according to the HTML standards at www.w3.org. (Clemens L ser) - Login and password send to Basic auth helpers is now URL escaped to allow for spaces and other "odd" characters in logins and passwords - Proxy Authentication is no longer blindly forwarded to peer caches if not used locally. If forwarding of proxy authentication is desired then it must now be configured with the login=PASS cache_peer option. - Responses with Vary: in the header are now cached by squid. (Henrik Nordstrom). - Removed unused 'siteselect_timeout' directive. Changes to Squid-2.4.STABLE7 (July 2, 2002): - Squid now drops any requests using transfer-encoding. Squid is a HTTP/1.0 proxy and as such do not support the use of transfer-encoding. - The MSNT auth helper has been updated to v2.0.3+fixes for buffer overflow security issues found in this helper. - A security issue in how Squid forwards proxy authentication credentials has been fixed - Minor changes to support Apple MAC OS X and some other platforms more easily. - The client -T option has been implemented - HTCP related bugfixes in "squid -k reconfigure" - Several bugfixes and cleanup of the Gopher client, both to correct some security issues and to make Squid properly render certain Gopher menus. - FTP data channels are now sanity checked to match the address of the requested FTP server. This to prevent theft or injection of data. See the new ftp_sanitycheck directive if this is not desired. - Security fixes in how Squid parses FTP directory listings into HTML Changes to Squid-2.4.STABLE6 (March 19, 2002): - The patch for 2.4.STABLE5 was insufficiently tested and introduced a bug that causes frequent assertions when handling DNS PTR answers. Changes to Squid-2.4.STABLE5 (March 15, 2002): - Fixed an array bounds bug in lib/rfc1035.c. This bug could allow a malicious DNS server to send bogus replies and corrupt the heap memory. Changes to Squid-2.4.STABLE4 (Feb 19, 2002) - htcp_port 0 now properly disables htcp - Fixed problem with certain non-anonymous ftp:// style URL's - SNMP bugfixes including several memory leaks Changes to Squid-2.4.STABLE3 (Nov 28, 2001): - Fixed bug #255: core dump on SSL/CONNECT if access denied by miss_access - Fixed bug #246: corrupt on-disk meta information preventing rebuilds of lost swap.state files - Fixed bug #243: squid_ldap_auth now supports spaces in passwords - Fixed a coredump when creating FTP directories - Fixed a compile time problem with statHistDump prototype mistmatch, reported by some compilers - Fixed a potential coredump situation on snmpwalk in certain configurations - Fixed bug #229: filedescriptor leakage in the "aufs" cache_dir store implementation - Serbian error message translations Changes to Squid-2.4.STABLE2 (Aug 24, 2001): - Expanded configure's GCC optimization disabling check to include GCC 2.95.3 - avoid negative served_date in storeTimestampsSet(). - Made 'diskd' pathnames more configurable - Make sure squid parent dies if child is killed with KILL signal - Changed diskd offset args to off_t instead of int - Fixed bugs #102, #101, #205: various problems with useragent log files - Fixed bug #116: Large Age: values still cause problems - Fixed bug #119: Floating point exception in storeDirUpdateSwapSize() - Fixed bug #114: usernames not logged with authenticate_ip_ttl_is_strict - Fixed bug #115: squid eating up resources (eventAdd args) - Fixed bug #125: garbage HTCP requests cause assertion - Fixed bug #134: 'virtual port' support ignores httpd_accel_port, causes a loop in httpd_accel mode - Fixed bug #135: assertion failed: logfile.c:135: "lf->offset <= lf->bufsz" - Fixed bug #137: Ranges on misses are over-done - Fixed bug #160: referer_log doesn't seem to work - Fixed bug #162: some memory leaks (SNMP, delay_pools, comm_dns_incoming histogram) - Fixed bug #165: "Store Mem Buffer" leaks badly - Fixed bug #172: Ident Based ACLs fail when applied to cache_peer_access - Fixed bug #177: LinuxPPC 2000 segfault bug due to varargs abuse - Fixed bug #182: 'config' cachemgr option dumps core with null storage - Fixed bug #185: storeDiskdDirParseQ[12]() use wrong number of args in debug/printf - Fixed bug #187: bugs in lib/base64.c - Fixed bug #184: storeDiskdShmGet() assertion; changed diskd to use bitmap instead of linked list - Fixed bug #194: Compilation fails on index() on some non-BSD platforms - Fixed bug #197: refreshIsCachable() incorrectly checks entry->mem_obj->reply - Fixed bug #215: NULL pointer access for proxy requests in accel-only mode Changes to Squid-2.4.STABLE1 (Mar 20, 2001): - Fixed a bug in and cleaned up class 2/3 delay pools incrementing. - Fixed a coredump bug when using external dnsservers that become overloaded. - Fixed some NULL pointer bugs for NULL storage system when reconfiguring. - Fixed a bug with useragent logging that caused Squid to think the logfile never got opened. - Fixed a compiling bug with --disable-unlinkd. - Changed src/squid.h to always use O_NONBLOCK on Solaris if it is defined. - Fixed a bug with signed/unsigned bitfield flag variables that caused problems on Solaris. - Fixed a bug in clientBuildReplyHeader() that could add an Age: header with a negative value, causing an assertion later. - Fixed an SNMP reporting bug. cacheCurrentResFileDescrCnt was returning the number of FDs in use, rather than the number of reserved FDs. - Added the 'pipeline_prefetch' configuration option. - cache_dir syntax changed to use options instead of many arguments. This means that the max_objsize argument now is an optional option, and that the syntax for how to specify the diskd magics is slightly different. - Various fixes for CYGWIN - Upgraded MSNT auth module to version 2.0. - Fixed potential problems with HTML by making sure all HTML output is properly encoded. - Fixed a memory initialization problem with resource records in lib/rfc1035.c. - Rewrote date parsing in lib/rfc1123.c and made it a little more lenient. - Added Cache-control: max-stale support. - Fixed 'range_offset_limit' again. The problem this time is that client_side.c wouldn't set the we_dont_do_ranges flag for normal cache misses. It was only being set for requests that might have been hits, but we decided to change to a miss. - Added the Authenticate-Info and Proxy-Authenticate-Info headers from RFC 2617. - HTTP header lines longer than 64K could cause an assertion. Now they get ignored. - Fixed an IP address scanning bug that caused "123.foo.com" to be interpreted as an IP address. - Converted many structure allocations to use mem pools. - Changed proxy authentication to strip leading whitespace from usernames after decoding. - Prevented NULL pointer access in aclMatchAcl(). Some ACL types require checklist->request_t, but it won't be available in some cases (like snmp_access). Warn the admin that the ACL can't be checked and that we're denying it. - Allow zero-size disk caches. - The actual filesystem blocksize is now used to account for space overheads when calculating on-disk cache size. - Made the maximum memory cache object size configurable. - Added 'minimum_direct_rtt' configuration option. - Added 'ie_refresh' configuration option, which is a hack to turn IMS requests into no-cache requests. - Added support for netfilter in linux-2.4. This allows transparent proxy connections to function correctly in the absence of a Host: header. This requires --enable-linux-netfilter to be passed through to configure. (Evan Jones) - Fixed a bug with clientAccessCheck() that allowed proxy requests in accel mode. - Fixed a bug with 301/302 replies from redirectors. Now we force them to be cache misses. - Accommodated changes to the IP-Filter ioctl() interface for intercepted connections. - Fixed handling of client lifetime timeouts. - Fixed a buffer overflow bug with internal DNS replies by truncating received packets to 512 bytes, as per RFC 1035. - Added "forward.log" support, but its work in progress. - Rewrote much of the IP and FQDN cache implementation. This change gets rid of pending hits. - Changed peerWouldBePinged() to return false if our ICP/HTCP port is zero (i.e. disabled). - Changed src/net_db.c to use src/logfile.c routines, rather than stdio, because of solaris stdio filedescriptor limits. - Made netdbReloadState() more robust in case of corrupted data. - Rewrote some freshness/staleness functions in src/refresh.c, partially inspired to support cache-control max-stale. - Fixed status code logging for SSL/CONNECT requests. - Added a hack to subtract cache digest network traffic from statistics so that byte hit ratio stays positive and more closely reflects what people expect it to be. - Fixed a bug with storeCheckTooSmall() that caused internal icons and cache digests to always be released. - Added statfs(2) support for displaying actual filesystem usage in the cache manager 'storedir' output. - Changed status reporting for storage rebuilding. Now it prints percentage complete instead of number of entries parsed. - Use mkstemp() rather than problem-prone tempnam(). - Changed urlParse() to condense multiple dots in hostnames. - Major rewrite of async-io (src/fs/aufs) to make it behave a bit more sane with substantially less overhead. Some tuning work still remains to make it perform optimal. See the start of store_asyncufs.h for all the knobs. - Fixed storage FS modules to use individual swap space high/low values rather than the global ones. - Fixed storage FS bugs with calling file_map_bit_reset() before checking the bit value. Calling with an invalid value caused memory corruption in random places. - Prevent NULL pointer access in store_repl_lru.c for entries that exist in the hash but not the LRU list. Changes to Squid-2.4.DEVEL4 (): - Added --enable-auth-modules=... configure option - Improved ICP dead peer detection to also work when the workload is low - Improved TCP dead peer detection and recovery - Squid is now a bit more persistent in trying to find a alive parent when never_direct is used. - nonhierarchical_direct squid.conf directive to make non-ICP peer selection behave a bit more like ICP selection with respect to hierarchy. - Bugfix where netdb selection could override never_direct - ICP timeout selection now prefers to use parents only when calculating the dynamic timeout to compensate for common RTT differences between parents and siblings. - No longer starts to swap out objects which are known to be above the maximum allowed size. - allow-miss cache_peer option disabling the use of "only-if-cached". Meant to be used in conjunction with icp_hit_stale. - Delay pools tuned to allow large initial pool values - cachemgr filesystem space information changed to show useable space rather than raw space, and platform support somewhat extended. - Logs destination IP in the hierarchy log tag when going direct. (can be disabled by turning log_ip_on_direct off) - Async-IO on linux now makes proper use of mutexes. This fixes some odd pthread segfaults on SMP Linux machines, at a slight performance penalty. - %s can now be used in cache_swap_log and will be substituted with the last path component of cache_dir. - no_cache is now a full ACL check without, allowing most ACL types to be used. - The CONNECT method now obeys miss_access requirements - proxy_auth_regex and ident_regex ACL types - Fixed a StoreEntry memory leak during "dirty" rebuild - Helper processes no longer hold unrelated filedescriptors open - Helpers are now restarted when the logs are rotated - Negatively cached DNS entries are now purged on "reload". - PURGE now also purges the DNS cache - HEAD on FTP objects no longer retrieves the whole object - More cleanups of the dstdomain ACL type - Squid no longer tries to do Range internally if it is not supported by the origin server. Doing so could cause bandwidth spikes and/or negative hit ratio. - httpd_accel_single_host squid.conf directive - "round-robin" cache_peer counters are reset every 5 minutes to compensate previously dead peers - DNS retransmit parameters - Show all FTP server messages - squid.conf.default now indicates if a directive isn't enabled in the installed binary, and what configure option to use for enabling it - Fixed a temporary memory leak on persistent POSTs - Fixed a temporary memory leak when the server response headers includes NULL characters - authenticate_ip_ttl_is_strict squid.conf option - req_mime_type ACL type - A reworked storage system that supports storage directories in a more modular fashion. The object replacement and IO is now responsibility of the storage directory, and not of the storage manager. - Fixed a bogus MD5 mismatch warning sometimes seen when using aufs or diskd stores - Added --enable-stacktraces configure option to set PRINT_STACK_TRACE, and extended support for this to Linux/GNU libc. - Disabled the "request timeout" error message sent if the user agent did not provide a request in a timely manner after opening the connection. Now the connection is silently closed. The error message was confusing user agents utilizing persistent connections. - Fixed configure --enable descriptions to match the arg names. - Eliminated compile warnings from auth_modules/MSNT code. - Require first character of hostnames to be alphanumeric. - Made ARP ACL work for Solaris. - Removed storeClientListSearch(). - Added counters to track diskd operation success and failures. - Fixed range_offset_limit. - Added code to retry ServFail replies for internal DNS lookups. - Added referer header logging (Jens-S. Voeckler). - Added "multi-domain-NTLM" authentication module, a Perl script from Thomas Jarosch. - Added configurable warning messages for high memory usage, high response time, and high page faults. - Made store dir selection algorithm configurable. - Added support for admin-definable extension methods, up to 20. - Added 'maximum_object_size_in_memory' as a configuration option - this defines the watermark where objects transit from being true hot objects to being in-transit objects in memory. It currently defaults to 8 KB. - Change to the fqdn code which changes how pending DNS requests are treated as private and only become public once they are completed. This can add extra load on DNS servers but prevents all the pending clients blocking if one of the queries got stuck. (Duane Wessels) - Converted more code to use MemPools, from Andres Kroonmaa. - Added more CYGWIN patches from Robert Collins. Changes to Squid-2.4.DEVEL3 (): - Added Logfile module. - Added DISKD stats via cachemgr. - Added squid.conf options for DISKD magic constants. Changes to Squid-2.4.DEVEL2 (Feb 29, 2000): Changes to Squid-2.4.DEVEL1 (): Changes to Squid-2.3.STABLE4 (July 18, 2000): - Fixed --localstatedir configure option (IKEDA Shigeru). - Fixed IPFilter headers on OpenBSD (Nic Bellamy, Brad Smith). - Added pthread_sigmask() check to configure (Daniel Ehrlich). - Added CYGWIN patches from Robert Collins. - Changed internal DNS lookups to retry queries that are returned with RCODE 2 (ServFail). - Added 'virtual port' support (Gregg Kellogg). If 'httpd_accel_uses_host_header' is enabled, then we use the port number from the Host header. Otherwise, when 'httpd_accel_port' is set to "0" we use the port number of the local end of the client socket. - Fixed a typo in carp.c (Nikolaj Yourgandjiev). - Made Squid accept GET requests that have a "content-length: 0" header. - Added a sanity check on the NHttpSockets[] array index (Gregg Kellogg). - Added a friendlier message when Squid can't find any DNS nameserver addresses to use (Daniel Kiracofe). - Added nonstandard WEBDAV methods: BMOVE, BDELETE, BPROPFIND (Craig Whitmore). - Added missing '%c' token replacement in error page generation. - Fixed a bug with 'minimum_object_size' that prevented internal icons from being loaded. - Fixed "extra semicolon" bug in storeExpiredReferenceAge() that could prevent any objects from being replaced. - Make sure that storeDirDiskFull() doesn't actually *increase* the cache size. - Changed a storeSwapMetaUnpack() assertion to a recoverable error condition. - Removed "wccpHereIam" event check that could cause Squid to stop sending HERE_I_AM messages. Changes to Squid-2.3.STABLE3 (May 15, 2000): - Fixed malloc linking problems on Solaris. The configure script incorrectly set options for dlmalloc. - Added a configure check to remove compiler optimization for GCC 2.95.x. - Updated MSNT authenticator module. - Updated Estonian error pages. - Updated Japanese error pages. - Fixed expires bug in httpReplyHdrCacheInit. It was incorrectly setting expires based on max-age. It was using the current time as a basis, instead of the response date. - Fixed "USE_DNSSERVER" typos. - Added a workaround for getpwnam() problems on Solaris. getpwnam() could fail if there are fewer than 256 FDs available. This causes root to own some disk files. - Added an 'offline_toggle' option via the cache manager. - Added a 'minimum_object_size' option. Files smaller than this size are not stored. - Added 'passive_ftp' option to disable passive FTP transfers. - Added 'wccp_version' option because some Cisco IOS versions require WCCP version 3. - The 'client' program in ping mode (-g) now prints transfer throughput. - Fixed logging of proxy auth username for redirected requests. - Fixed bogus Age values for IMS requests. - Fixed persistent connection timeout for client-side connections. It was hard-coded to 15 seconds, now uses the 'pconn_timeout' value. - Fixed up httpAcceptDefer. It wasn't being used properly and caused high CPU usage when Squid gets close to the FD limit. - Numerous delay_pools fixes and checks. - Fixed SNMP coredumps from running snmpwalk. - Added a check for errno == EPIPE in icmp.c when pinger uses a Unix socket instead of a UDP socket. - Fixed ACL checklist memory initialization bugs. - Cleaned up the MIB file. Replaced contact information and checked description fields. - Removed LRU reference_age hard-coded upper limit. - Fixed async I/O FD leak. - Made getMyHostname() more robust. - Fixed domain list matching bug. "x-foo.com" wasn't properly compared to ".foo.com" and confused splay tree ordering. - Added a check for whitespace in hostnames and optionally strip whitespace if 'uri_whitespace' setting allows. - Added status code and checking to ASN/whois queries. Changes to Squid-2.3.STABLE2 (Mar 2, 2000): - Changed Copyright text. - Changed configure so that some IRIX-6.4 hacks apply to all IRIX-6.* versions. - Cleaned up HTML bugs in error pages. - Told configure to check for netinet/if_ether.h, which is used in ARP ACL code, but might not be required. - Added "Cookie" to known HTTP headers so it can be used in anonymizer configuration. - Added optional TCP_REDIRECT log code for logging of 301/302 responses returned by Squid. - Added a check for a currently running Squid process. If the pid file exists, and the pid is running, Squid complains and refuses to start another instance. - Changed async I/O scope to PTHREAD_SCOPE_PROCESS for IRIX. - Fixed a bug with the PURGE method. The purge enable flag was not getting cleared during reconfigure. Also required PURGE method to be used in http_access list before enabling. - Fixed async I/O assertions for file open errors. - Fixed internal DNS assertion when unpacking truncated messages. - Fixed anonymize_headers bug that caused all headers to be allowed after a reconfigure. - Fixed an access denied bug for accelerator-only installations. - Fixed internal DNS initialization so that it uses 'dns_nameservers' settings in squid.conf if set. - Fixed 'maxconn' ACL bug that caused it to work backwards (Pedro Ribeiro). - Fixed syslog bug for daemon mode on Linux. - Fixed 'http_port' parsing bugs. - Fixed internal DNS byte ordering bugs for PTR queries. - Fixed internal DNS queue getting stuck during periods of low activity (Henrik). - Fixed byte ordering bugs for parsing EPLF FTP listings on 64-bit systems. - Fixed 'request_body_max_size' bug that caused all POST, PUT requests to be denied if max size is set to zero. - Fixed 'redirector_access' bug when using 'myport' ACLs. - Fixed CARP neighbor selection bugs for down peers. - Added 'client_persistent_connections' and 'server_persistent_connections' flags to disable persistent connections for clients and servers. - Fixed access logging bug that caused many requests to be logged as TCP_MISS. - Added some bounds checking to delay pools code. Changes to Squid-2.3.STABLE1 (Jan 9, 2000): - Updated PAM authentication module from Henrik Nordstrom. - Updated Bulgarian error messages from Svetlin Simeonov. - Changed ACL routines so that User-Agent (browser) string is always taken from compiled HTTP request headers instead of passed as an argument to aclCreateChecklist. - Added a 'strip' option to the 'uri_whitesace' configuration directive and made it the default behavior. Whitespace found in URI's is now stripped out by default. - Added chroot feature. The 'chroot_dir' config option enables it and specifies the directory. - Changed clientBuildReplyHeader so that the Age header is added only for cache hits, and only when we can calculate a valid, positive age value. - Changed clientWriteComplete and clientGotNotEnough so that they keep persistent connections open for more types of replies that don't have bodies. - Changed filemap.c routines to dynamically grow filemap space as needed. - Added a hack to ftp.c to deal with ftp.netscape.com, which sometimes doesn't acknowledge PASV commands. - Fixed FTP bug with ftpScheduleReadControlReply; there was not always a timeout handler on the control socket after the transfer completed. - Fixed FTP filedescriptor leak from invalid PASV replies. - Changed httpBuildRequestHeader so that it doesn't copy the Host header from the client request. Instead we should generate our own Host header which is known to be correct. - Changed storeTimestampsSet to adjust entry->timestamp if the response includes an Age header. - Removed size limit from storeKeyHashBuckets. - Changed fwdConnectStart from a "heavy" to a "light" event. - Fixed an 'anonymize_headers' bug that affects unknown HTTP headers. With the bug, if you list a header that Squid doesn't know about (such as "Charset"), it would add HDR_OTHER to the allow/deny mask. This caused all unknown headers to be allowed or denied (depending on the scheme you use). Now, with the bug fixed, an unknown header in the 'anonymize_headers' list is simply ignored. Changes to Squid-2.3.DEVEL3 (): - Added MSNT auth module from Antonino Iannella. - Added --enable-underscores configure option. This allows Squid to accept hostnames with underscores in them. Your DNS resolver may still complain about them, however. - Added --heap-replacement configure option. This enables the alternative cache replacement policies, such as GDSF, and LFUDA. - WCCP establishes and registers with the router faster. - Added 'maxconn' acl type to limit the number of established connections from a single client IP address. Submitted by Vadim Kolontsov. - Close FTP data socket as soon as transfer completes (Alexander V. Lukyanov). - Fixed ftpReadPass() to not clobber ctrl.message when the PASS command fails. - Added a redirect.c patch so squidGuard is able to do per-user access control (Antony T Curtis). - discard the pumpMethod() function, and instead use the fact that the request has a request entity (content-length present) (Henrik). - Reload the MIME icons at reconfigure time (Radu Greab). - Updated Richard Huveneers' SMB authentication module to his version 0.05 package. - Fixed lib/heap.c::heap_delete() bug when deleting the last node. - Fixed an integer conversion bug in lib/rfc1035.c::rfc1035AnswersUnpack(). - Fixed lib/rfc1738 routines to encode reserved characters, in addition to encoding the unsafe characters (Henrik). - Changed the interface for splay compare and "walk" functions to take a void pointer, instead of a splayNode pointer (Henrik). - Changed numerous HTTP parsing routines to use ssize_t instead of size_t. This was done because size_t may be signed or unsigned. When it is unsigned, gcc emits numerous "comparison is always true" warnings. At least we know ssize_t is always signed. - Fixed src/HttpHeaderTools::httpHeaderHasConnDir() and friends so that it properly handles multi-value lists. - Added an "end" (ssize_t) parameter to src/HttpReply::httpReplyParse() so that we know exactly where to terminate the header buffer. - Changed src/access_log.c::log_quote() so that it only encodes whitespace characters, and not all URL-special characters (Henrik). - Added local port ACL type ("myport") (Henrik). - Added maximum number of connections per client ("maxconn") as an ACL type. - Fixed proxy authentication username/password parsing to be more robust (Henrik). - Fixed ACL domain/host and domain/domain comparison functions yet again. Eliminated duplicate code so that only src/url.c::matchDomainName() contains this mysterious code. - Changed the 'http_port' option to accept an IP address or hostname as well (Henrik). - Removed 'tcp_incoming_addr' option. - Added an access control list for the redirector ('redirector_access'). Requests which match are sent to the redirector. All requests. are redirected by default. - Added the 'authenticate_ip_ttl' option. It specifies how long a valid proxy authentication credential is bound to a specific address. - Added 280, 488, 591, and 777 to "Safe_ports" ACL. - Removed the unused and highly questionable 'forward_snmpd_port' option. - Added an option to accept DNS messages from unknown nameservers. This may be necessary if replies come from a different address than queries are sent to. - Added #includes for IP Filter files in netinet directory. - Fixed a bug with retrying forwarded IMS requests (Henrik). - Fixed a bug in src/client_side.c::clientInterpretRequestHeaders() where we were checking a cache-control bit before getting the mask from the HTTP headers (pallo@initio.no). - Fixed a bug with "no_cache" access list. If not defined, everything was uncachable by default. - Fixed a bug with timed-out client-side HTTP connections. We didn't cancel the read handler, which could lead to "rwstate != NULL" warnings. - Changed comm_open() to only call fdAdjustReserved() for specific errors (ENFILE, EMFILE); - Fixed NULL pointer bug in idnsParseResolvConf(). - Split CACHE_DIGEST_HIT into CD_PARENT_HIT and CD_SIBLING_HIT. - Added DELETE request method. - Added RFC 2518 HTTP status codes. - Fixed handling of URL passwords when we need to rewrite a BASE HREF URL (Henrik). - Fixed a bug with FTP requests where a request gets aborted, but we try to complete it anyway. It would result in a "store_status != STORE_PENDING" assertion. The solution is to check for ENTRY_ABORTED before reading from the control channel too. - Changed FTP to retry a request if Squid fails to establish a PASV data connection (Henrik). - Fixed numerous HTCP memory leaks and an uninitialized memory bug. - Changed httpMaybeRemovePublic() with RFC 2518 and 2616 in mind (Henrik). - Minor fixes for Rhapsody systems. - Define _XOPEN_SOURCE_EXTENDED in squid.h so that AIX systems don't include varargs.h. - Changed src/store_client.c::storeClientType() so that an entry can have more than one STORE_MEM_CLIENT. - Changed src/store_client.c::storeClientReadHeader() to check swapfile metadata (Henrik). - Changed src/url.c::urlCheckRequest() to return FALSE for any "https://" URL. These should always be CONNECT instead. If Squid gets an "https://" URL, it is a browser bug. - Added numerous squid.conf options for controlling cache digests. Previously these were hard-coded in src/store_digest.c. (Martin Hamilton) - Added 'cache_peer' option called 'digest-url' that lets you specify the URL for a peer's digest. (Martin Hamilton) - Added DELAY_POOLS hacks to scan "slow" connections in a random order (David Luyer). - ARP_ACL fixes from Damien Miller. Linux 2.2.x uses a per-interface arp/neighbour cache, whereas 2.0.x uses a unified cache. Under 2.2.x you are required to specify a interface name when looking up ARP table entries with SIOCGARP. - If the process umask is not set (i.e. 0), then Squid changes it to 007. Changes to Squid-2.3.DEVEL2 (): - Added --enable-truncate configure option. - Updated Czech error messages () - Updated French error messages () - Updated Spanish error messages () - Added xrename() function for better debugging. - Disallow empty ("") password in aclDecodeProxyAuth() (BoB Miorelli). - Fixed ACL SPLAY subdomain detection (again). - Increased default 'request_body_max_size' from 100KB to 1MB in cf.data.pre. - Added 'content_length' member to request_t structure so we don't have to use httpHdrGetInt() so often. - Fixed repeatedly calling memDataInit() for every reconfigure. - Cleaned up the case when fwdDispatch() cannot forward a request. Error messages used to report "[no URL]". - Added a check to return specific error messages for a "store_digest" request when the digest entry doesn't exist and we reach internalStart(). - Changed the interface of storeSwapInStart() to avoid a bug where we closed "sc->swapin_sio" but couldn't set the pointer to NULL. - Changed storeDirClean() so that the rate it gets called depends on the number of objects deleted. - Some WCCP fixes. - Added 'hostname_aliases' option to detect internal requests (cache digests) when a cache has more than one hostname in use. - Async I/O NUMTHREADS now configurable with --enable-async-io=N (Henrik Nordstrom). - Added queue length to async I/O cachemgr stats (Henrik Nordstrom). - Added OPTIONS request method. Changes to Squid-2.3.DEVEL1 (): - Added WCCP support. This adds the 'wccp_router' squid.conf option. - Added internal DNS queries; Most installations can run without the external dnsserver processes. - Rewrote much of the code that stores cache objects on disk. Developed a programming interface that should allow new storage systems to be added easily. This still is pretty ugly and needs a lot of work, however. - Replaced async_io.c "tags" with callback data locks. This probably breaks async IO in a bad way. - Tried to write an Async IO disk storage module. - Added code to replace the StoreEntry linked list with a heap structure. This allows for different replacement algorithms, instead of being stuck with LRU. This adds the 'replacement_policy' squid.conf option. (John Dilley et al). - Fixed HTCP queries by actually checking for freshness based on the HTCP header fields. - Fixed passing of redirector command line arguments. - Added 'request_header_max_size' squid.conf option. - Added 'request_body_max_size' squid.conf option. - Added 'reply_body_max_size' squid.conf option. - Added 'peer_connect_timeout' squid.conf option. - Added 'redirector_bypass' squid.conf option. - Added RFC 2518 (WEBDAV) request methods. Changes to Squid-2.2 (April 19, 1999): - Removed all SNMP specific ACL code SNMP now uses generic squid ACL's - Removed view-based access crontrol - Cleaned up and simplified SNMP section of squid.conf - Changed the SNMP code to use a tree stucture. - Added objects to MIB: Request Hit Ratio's Byte Hit Ratio's Number of Clients - Changed SNMP Agent to return object instances correctly. - Added our own assert() macro so we can use debug() instead of printing to stderr. - Added eventFreeMemory(). - Fixed ipcCreate() bug when debug_log has FD <= 2. - Changed watchChild() and related code in main.c so that Squid can behave more like a proper daemon process. - Added 'prefer_direct' option (enabled by default) so that people can give parents higher preference than direct. - Fixed ipc.c close() bug for async IO. On FreeBSD, comm_close() doesn't work for child processes when async IO is used. - Fixed setting the public key for large ``icons'' (Henrik Nordstrom). - Rewrote peer digest module to fix memory leaks on reconfigure and clean the code. Increased "current" digest version to 5 ("required" version is still 3). Revised "Peer Select" cache manager stats. - Added "-k parse" command line option: parses the config file but does not send a signal unlike other -k options. - Revamped storeAbort() calling. Only store_client.c has all the right information to determine if the request should be aborted. Now client and server modules just storeUnregister without ever needing to call storeAbort. - Small change of Squid output for FTP (Andrew Filonov, Henrik Nordstrom). - clientGetsOldEntry() sends old entry if new request status is in the 500-range (Henrik Nordstrom). - Changed configure so it works with IRIX6.4 C compiler (broken?) option -OPT:fast_io=ON. - Fixed comm_connect_addr() non-blocking connections for SONY NEWSOS (Makoto MATSUSHITA). - Changed "#ifdef __STDC__" to "#if STDC_HEADERS" as recommended by autoconf documentation. - Fixed client-side cache-control max-age (Henrik Nordstrom). - Added a new error page: ERR_SHUTTING_DOWN. fwdStart() returns this error if it is called while squid is in the process of shutting down. - Added support for linuxthreads package under FreeBSD (Tony Finch). - Fixed HP-UX StatHist.c assertions by making the "hbase_f" functions non-static (Michael Pelletier). - Fixed logging of authenticated usernames even if the authorization is not cached (Dancer). - Fixed pconnPush() bug that prevented holding on to persistent connections (Manfred Bathelt). - Pid file now rewritten on SIGHUP. - Numerous Ident changes: - Ident lookups will now be done on demand if you use the 'ident' ACL type. - The 'ident_lookup on|off' option has been replaced with an access list, so you can do lookups only for some client addresses. - Added an 'ident_timeout' option to specifiy the amount of time to wait for an ident lookup. - Added a (local) hit rate to mempool metering. - FTP Restarts (REST command) is now supported. - Check for libintl.a on SCO3.2. - Disable poll() on SCO3.2. - Numerous Async IO enhancements from Henrik. - Removed cache_mem_low and cache_mem_high options (Henrik Nordstrom). - Replaced 'persistent_client_posts' with 'broken_posts' access list. - Rewrote the anonymizer. - Removed the http_anonymizer option. - Added the anonymize_headers option to allow individual referencing of headers for addition or removal. See 'anonymize_headers' in squid.conf for additional configuration. - Fixed config file parser's handing of optional directives. Some people might get new warnings about unknown config directives. - Added 'myip' ACL type. This is the local IP address for connected sockets (Luyer). - Fixed parsing of FTP DOS directory listings with spaces (Nordstrom). - Numerous DELAY_POOL changes/fixes from David Luyer: - Makes no-delay neighbors for DELAY_POOLS work by using a fd_set with the connections to no-delay peers marked in it. - Makes IP addresses ending in 0 and 255, and network number 255, work with individual and network delay pools (they were previously not permitted, and documented as such). - Massive overhaul of delay pools code - dynamically allocated delay pools, as many as required. - delayPoolsUpdate stops running if DELAY_POOLS is configured but no delay pools are configured. - Initial delay pool levels are now configurable as a percentage of the maximum for the pool in question (used to be all set to 1 second worth of traffic). Pools are restored to this level on reconfiguratoin. - Changed storeClientCopy to give a swap-in failure if the number of open disk FD's is above the 'max_open_disk_fds' limit. Otherwise, a very loaded cache will end up with all disk files open for reading, and none for writing. - Added lib/inet_ntoa.c from BSD Unix for systems that have broken inet_ntoa(). (Erik Hofman). - Added more specific FTP error messages for "permission denied, "file not found," and "service unavailable." (Tony Finch) - Added xisspace(), xisdigit(), etc, macros to cast function args and eliminate compiler warnings. - Fixed case-sensitive comparisons of domain names (Henrik Nordstrom). - Added proxy-authentication to cachemgr.cgi's requests (Henrik Nordstrom). - Changed Squid to *truncate* rather than *unlink* purged swap files. Can be reversed by undefining USE_TRUNCATE_NOT_UNLINK in src/defines.h. - Changed internal icon headers to use Cache-control Max-age instead of Expires. - Changed storeMaintainSwapSpace behavior to be adjusted smoothly, instead of discretely, between store_swap_low and store_swap_high. This includes the number of objects to scan, number to remove, and time until the next storeMaintainSwapSpace event. - Fixed a quick_abort bug that incorrectly calculated content lengths. - Added getpwnam() auth module from Erik Hofman. - Added 'coredump_dir' option. - Fixed a peerDestroy() assertion that required peer->digest to be NULL at the end of peerDestroy(). - configure script now automatically enables dlmalloc for Solaris/x86. - configure enables poll() on linux 2.2 and later (Henrik). - Icon files are now distributed in binary format, install will not need to run 'sh' and 'uudecode'. - Fixed some bugs with large responses (>READ_AHEAD_GAP) and re-forwarding requests and ENTRY_FWD_HDR_WAIT. fwdCheckDeferRead() will NOT defer reading if the ENTRY_FWD_HDR_WAIT bit is set. - Fixed a "F->flags.open" assertion for aborted FTP PUT's. - Fixed a (double) cast problem that caused statAvgTick() events to be added as fast as possible. - Changed httpPacked304Reply() to not include the Content-Length header for 304 replies that Squid generates. We used to include the length of the cached object, and this broke persistent connections. 2.2.STABLE2: - Fixed configure bug for statvfs() checks. Configure reports "test: =: unary operator expected" or similar because an unquoted variable is not defined. - Fixed aclDestroyAcls() assertion because some ACL types are not listed in the switch statement. Occurs for srcdom_regex and dstdom_regex ACL types during reconfigure. - Typo "applicatoin" in src/mime.conf - The unlinkd daemon never saw the USE_TRUNCATE_NOT_UNLINK #define because it didn't include squid.h. - Fixed commRetryFD() when bind() fails. commRetryFD was closing the filedescriptor, but it is the upper layer's job to close it. - Changed configure's "maximum number of filedescriptors" detection to only use getrlimit() for Linux. On AIX, getrlimit returns RLIM_INFINITY. - Fixed snmpInit() nesting bug. - Fixed a bug with peerGetSomeParent(). It was adding a parent to the FwdServers list, regardless of the ps->direct value. This could cause every request to go to a parent even when always_direct is used. - Changed fwdServerClosed() to rotate the "forward servers" list when a connection establishment fails. Otherwise it always kept trying to connect to the first server int the list. 2.2.STABLE3: - Fixed preprocessor problems for HP-UX in lib/safe_inet_addr.c. - Avoid coredump in aclMatchAcl() if someone tries to use proxy authentication with a non-HTTP request (e.g. icp_access). - Moved 'ident_lookup_access' in squid.conf so it appears after the ACL section. - Fixed typo in squid.conf on "Config.Addrs.snmp_outgoing" - Fixed a case in clientCacheHit() where we thought it was a hit, but the reply status was not 200, so we had to perform a cache miss. We forgot to change the log_type and these were being recorded as TCP_HIT's. - Fixed a void pointer subtraction bug in delayIdPtrHashCmp(). - Fixed delay_pools coredump and memory leak bugs from NULL delay_id values. - Fixed a SEGV bug with delay_pools when requesting 'objects' or 'vm_objects' from the cachemgr. - Added a workaround for buggy FTP servers that return a size of zero for non-zero-sized objects. - Removed umask(0) call from main(). - Fixed a peer selection bug that caused us to never select a neighbor based on ICP replies if the ICP timeout occurs. In conjunction with this, removed the PING_TIMEOUT state. - Fixed a store_rebuild bug that caused us to get stuck trying if a cache_dir subdirectory didn't exist. - Fixed a buffer overrun bug in gb_to_str(). 2.2.STABLE4: - Fixed a dread_ctrl leak caused in store_client.c - Fixed a memory leak in eventRun(). - Fixed a memory leak of ErrorState structures due to a bug in forward.c. - Fixed detection of subdomain collisions for SPLAY trees. - Fixed logging of hierarchy codes for SSL requests (Henrik Nordstrom). - Added some descriptions to mib.txt. - Fixed a bug with non-hierarchical requests (e.g. POST) and cache digests. We used to look up non-hierarchical requests in peer digests. A false hit may cause Squid to forward a request to a sibling. In combination with 'Cache-control: only-if-cached, this generates 504 Gateway Timeout responses and the request may not be re-forwardable. - Fixed a filedescriptor leak for some aborted requests. Changes to Squid-2.1 (November 16, 1998): - Changed delayPoolsUpdate() to be called as an event. - Replaced comm_select FD scanning loops with global fd_set structures. Inspired by Jeff Mogul's patch for squid 1.1. - Moved functions common to dns.c, redirect.c, authenticate.c, ipcache.c, and fqdncache.c into helper.c. - Changed storeClientCopy2() so that it keeps sending the remainder of a STORE_ABORTED request, instead of cutting off the client as soon as the object becomes aborted. - Fixed combined ipf-transparent proxy and a local http-accelerator operation (Quinton Dolan). - Rewrote base64_decode.c because of potential buffer overrun bugs. - Configurable handling of whitespace in request URI's. See 'uri_whitespace' in squid.conf. - Added ability to generate HTTP redirect messages from the redirector output by prepending "301:" or "302:" to the new url. See FAQ 4.16 for more details. - Eliminated refreshWhen() which was out-of-sync with refreshCheck() potentially causing under-utilized cache digests - Maintain refreshCheck statistics on per-protocol basis so we can tell why ICP or Digests return too many misses, etc. - Fixed delay_pools.c class2/class3 typo (Simon Woods). - Changed squid.conf's default access controls to deny all HTTP requests. Admins must write ACL rules to specifically allow their local clients. - Patched French error messages (Mathias HERBERTS). - NextStep porting fixes by Mike Laster: - use xstrdup() in cf_gen.c - check for putenv() in configure - #define S_ISDIR macro - Added --disable-poll configure option (Henrik Nordstrom). - Fixed internal URL hostname case bugs (Henrik Nordstrom). - Patched ftp.c so we never cache autenticated FTP requests (Henrik Nordstrom). - Fixed FTP authentication. We tried to unescape authentication given by basic authentication which is not URL escaped (Henrik Nordstrom). - Fixed HTTP version for common logfile format (Henrik Nordstrom). - Added 'redirect_rewrites_host_header' option to disable rewriting of Host header for redirector responses (Henrik Nordstrom). - Allow semi-customized error message signatures (Henrik Nordstrom). - Fixed bug with errors for unsupported requests (Henrik Nordstrom). - Fixed handling of blank lines in ACL input files (Henrik Nordstrom). - Changed proxy_auth ACL type to consist of a list of valid users. REQUIRED == any (same as ident ACL). ACL type user changed to ident since this is what it really is. (Henrik Nordstrom). - Fixed long URL bugs; make sure 'log_uri' never exceeds MAX_URL bytes. - Allow comments in external ACL files (Gerhard Wiesinger). - Added 'range_offset_limit' configuration option. Requests with ranges that start after this value will be passed on unmodified, and Squid will not cache the response (Henrik Nordstrom). - Added Client HTTP Hit byte counters to 'counters' output (Douglas Swarin). - Got Squid to compile with --enable-async-io on FreeBSD. - Fixed infinite loop bug for cachemgr 'config' option. - Fixed cachability bugs for replies with Pragma: no-cache. - Made content-type multipart/x-mixed-replace uncachable. - Y2K fix for parsing dates in "Wed Jun 9 01:29:59 1993 GMT" format (Richard Kettlewell). - Fixed passing -s option to dnsserver processes (Alvaro Jose Fernandez Lago). - Changed proxy_auth to work on internal objects and when in accelerator mode. (Henrik Nordstrom) - Added login=user:password option to cache_peer directive to be used from a dial-up cache where the parent requires proxy authentication. (Henrik Nordstrom) - If you want to "auto-login", then use a URL on the form http://username:password@server/.... Squid now picks this up when going direct, and turns it into basic WWW authentication. It is also possible to do automatic login to certain servers by using a redirector to add the needed authentication information. (Henrik Nordstrom) - Changed refreshCheck() so that objects with negative age are always stale. - Fixed "plain" FTP listings (Henrik Nordstrom). - Fixed showing banner/logon message for top-level FTP directories (Henrik Nordstrom). * Changes below have been made to SQUID_2_1_PATCH1 - Fixed pinger packet size assertion. - Fixed WAIS forwarding. - Fixed dnsserver coredump bug caused by using both -D and -s options. * Changes below have been made to SQUID_2_1_PATCH2 - Fixed EBIT macro bugs when the bitmask is a 64-bit long. - Fixed proxy auth NULL password bug. - Fixed queueing of multiple peerRefreshDNS events. - Added a stack of StoreEntry objects to be released after store rebuild completes. - Fixed NULL pointer bugs with too-large requests (found by Martin Lathoud). - Fixed reading replies from buggy ident servers. Replies might not have terminating CR or LF (Henrik Nordstrom). - Changed internal StoreEntry key so that the request method is encoded as a single octet. Encoding an enumerated type has size and byte-order incompatibilities, especially for cache digests. - Fixed storeEntryLocked so that SPECIAL, but PRIVATE entries are not always locked. This fixes having multiple store_digest's stuck in memory. - Fixed clientProcessOnlyIfCachedMiss so it unlocks and unregisters from "cache hit" entries. * Changes below have been made to SQUID_2_1_PATCH3 - Fixed memory leak in clientHandleIMSReply for storeClientCopy failures. Changes to Squid-2.0 (October 2, 1998): - Added NAT/Transparent hijacking code from Quinton Dolan. - Added actual filesystem usage to cachemgr 'storedir' page. Only works for operating systems which support statvfs(). - Fixed HTCP compile-time bugs. - Fixed quick_abort bugs. Configured values are stored as Kbytes, not bytes. - Removed fwdAbortFetch(). It breaks quick_abort and seems mostly useless. - Changed storeDirSelectSwapDir() to skip swap directories when their utilization is over the high water mark ratio. - Fixed off-by-one bug for dead neighbor detection (Joe Ramey). - fixed bugs in Content-Range header generation - changed the way Range requests are handled: - do not "advertise" our ability to process ranges at all - on hits, handle simple ranges and forward complex ones - on misses, fetch the whole document for simple ranges and forward range request for complex ranges The change is supposed to decrease the number of cases when clients such as Adobe acrobat reader get confused when we send a "200" response instead of "206" (because we cannot handle complex ranges, even for hits) Note: Support for complex ranges requires storage of partial objects. - Removed SNMP mib-2.system group from squid. - Removed SNMP ability to iterate through ipcache and friends. - Added SNMP ipcache/fqdncache basic statistics. - Converted SQUID-MIB to SMIv2 (RFC 1902). - Moved SQUID-MIB to enterprises section of the tree in preparation of the split into PROXY-MIB & SQUID-MIB. - Corrected minor errors in SQUID-MIB. - Moved uptime into cacheSystem from cacheConfig. - Corrected a number of get-next-request bugs, snmpwalk should now return all objects and not skip some. - Fixed netdbClosestParent() so it won't return sibling peers. - Fixed a bug with secondary clients on entries with ENTRY_BAD_LENGTH set. We should release the bad entry to prevent secondary clients jumping on. - Changed MIB to prevent parse warnings at startup. * Changes below have been made to SQUID_2_0_PATCH1 - Fixed a forwarding loop bug. Even though we were detecting a loop, it was not being broken. - Try to prevent sibling forwarding loops by NOT forwarding a request to a sibling if we have a stale copy of the object. Validation requests should only be sent to parents (or direct). - Fixed ncsa_auth hash bugs when re-reading password file. - Changed clientHierarchical() so that by default SSL/CONNECT requests do NOT go to neighbor caches. - Changed clientHandleIMSReply() to not call storeAbort() because there can be more than one client hanging on the StoreEntry. This hopefully fixes "store_status != STORE_ABORTED" assertions. - Added temporary fix to httpMakePublic() to prevent assertions (!EBIT_TEST(e->flags, RELEASE_REQUEST)) in storeSetPublicKey(). * Changes below have been made to SQUID_2_0_PATCH2 - PATCH1 introduced a seriously stupid bug which prevented ICP queries for all requests. Fixed by checking request->hierarchical in peerSelectFoo(). Changes to squid-1.2.beta25 (September 21, 1998): - Fixed async IO bugs from adding filedescriptor arg to AIOCB callbacks (Henrik Nordstrom). - Fixed store_swapout.c assertion. We were freeing object data past the swapout_done offset. This probably happens (only?) when an object changes from cachable to uncachable while it is being swapped out. - Added MEM_CLIENT_SOCK_BUF type so we can change the size of the buffers used for writing data to the client sockets. - Added configure check for libbind.a. If found, it will be used instead of libresolv.a. - Changed fwdStart() to always allow internally generated requests, such as for peer digests. These requests are known to fwdStart() because the address arg is set to 'no_addr'. - Completed initial HTCP implementation. It works, but is not tested much. - Added counters for I/O syscalls. - Fixed httpMaybeRemovePublic. With broken ICP neighbors (netapp) Squid doesn't use private keys. This caused us to remove almost every object from the cache. - Added 'asndb' cachemgr stats to show AS Number tree. - Fixed AS Number byte-order bug for netmasks. - Fixed comm_incoming calling rate for high loads (Stewart Forster). - Give always_direct higher precedence than never_direct (Henrik Nordstrom). - Changed PORT ACL type to accept ranges. Now you can easily deny, for example, all priveleged ports except 80, 70, 21, etc. - ARP ACL fixes for Linux (David Luyer). - Replaced various "EBIT" flags bitfileds with structures of "int:1" members. - Changed storeKeyPrivate and storeKeyPublic to be a bit more efficient by removing snprintf(). This causes an incompatibility with old cache keys, however. To transition, we will look up both the new and old style keys for about the next 30 days. After that, if you haven't run this (or a future) version, your cache contents will be lost. - Made the client-side write buffer size configurable with a #define in defines.h. By default it is still 4096 bytes. - Removed redirectUnregister(). It should be unnecessary because of cbdata locks. - Fixed multiple HEAD request brokennesses (Henrik Nordstrom). - Changed non-blocking connect(2) code to call getsockopt() instead of connect() again. This is the approach recommended by Stevens, and fixes bugs on BSD-ish systems when subsequent connect() calls loop with EAGAIN status. - Added MD5 cache keys to memory pool accounting. - Added code to track number of open DISK descriptors and stop swapping out objects if the number of disk descriptors becomes too large. For now the limit must be manually configured with the 'max_open_disk_fds'. By default, there is no limit. - Stopped encoding a request method in the high byte of the ICP reqnum field. Instead queried cache keys are copied to a static array, indexed by the reqnum, modulo the array size. Now we just use the request number to lookup a cache key, instead of rebuilding it from the ICP reply URL and method, unless we have netapp neighbors--they don't do reqnum properly. - Fixed reconfigure memory access bugs in redirect.c. - Ignore unreasonably large ICP RTT values which cause overflow bugs in calculating the average RTT (thanks Niall!) Changes to squid-1.2.beta24 (August 21, 1998): - Added Bulgarian error pages by Evgeny Gechev. - Changed StoreEntry->lock_count to a u_short. - Replaced urlcmp with strcmp - Fixed pragma no-cache ejecting ENTRY_SPECIAL objects (Henrik Nordstrom). - Eliminated unneeded BASE HREF on "root" directories (Henrik Nordstrom). - Fixed peerDigestFetchFinish() assertion caused by forwarding failures (e.g. miss_access rules). - Changed signal handlers with ASYNC_IO and Linux so that -k command line options work (Miquel van Smoorenburg). - Rewrote shutdown code to use events instead of setting FD timeouts. - Fixed cachemgr 'objects' (statObjects()) by adding a check for READ_AHEAD_GAP, and calling storeCheckSwapout() in storeBufferFlush(). Otherwise, the read-past pages would never be freed. - Fixed DNSSERVER shutdown bugs. The re-opened dnsserver processes were being closed by the dnsServerShutdown event. - Modified storeHashInsert() to insert PRIVATE objects at the tail of the LRU list, and PUBLIC objects at the head. Thus, PRIVATE objects get kicked out quicker. - Added David Luyer's DELAY_POOLS code. - Fixed a bug due to HEAD replies which lack the end-of-headers line. - Made proxy-auth realm string configurable (Bob Franklin) - Changed default mime time to a viewable one (Henrik Nordstrom). - configure fixes for Sony's NEWS-OS 6.x (Makoto MATSUSHITA). - Fixed 'you are running out of filedescriptors' bug which could cause the HTTP incoming connection handler to not be reset. - Changed syslog logging. Now squid debug levels 0 and 1 go to syslog. Level 0 gets LOG_WARNING and level 1 gets LOG_NOTICE (this needs more work!) - Fixed memory access errors in statAvgTick(). - Fixed duplicate requestUnlink() bug in forward.c - Fixed possible memory access bugs from not setting e->mem_obj = NULL in destroy_MemObject(). - Deleted TCP_IMS_MISS tag. Always use TCP_IMS_HIT instead. - Modified headersEnd and httpMsgIsolateHeaders to account for funky line terminations such as CRCRNL. (``but Netscape and IE _tolerate_ this'') - Fixed carp functions (Eric Stern). - Replaced internal proxy_auth code with extern authentication module (Arjan de Vet). - moved hash.c to libmiscutil.a. - Fixed handling of ICP queries with whitespace in URLs. Now we return ICP error and escape the URL before logging. - Added configure check for socklen_t (David Luyer). - Removed USE_SPLAY #defines; it is now standard. - Added FD arg to async IO callbacks (AIOCB) so we can eliminate temporary disk_ctrl_t structures. - Changed ENOSPC disk write errors to reduce specific cache_dir sizes, and not just the size of the cache as a whole. - Added httpMaybeRemovePublic() to purge public objects for certain responses even though they are uncachable. This is needed, for example, when an initially cachable object later becomes uncachable. - Added refresh_pattern options to ignore client reloads (Henrik Nordstrom) - Relocated disk.c code which combines blocks for writing (Stewart Forster). Changes to squid-1.2.beta23 (June 22, 1998): - Added Turkish error pages by Tural KAPTAN. - Added basic support for Range requests. For most cachable requests, Squid replies with an "Accept-Ranges" header. Upon receiving a potentially cachable Range request for a not cached object, Squid requests the whole object from origin server and then replies with specified range(s) to the client. Multi-range requests are supported. Adjacent overlapping ranges are merged. If-Range requests are supported. Limitations: Multi-range requests with out of order ranges are not supported. - Made md5.c use standard memcpy and memset if they are avaliable. - Memory pools will now shrink if Squid is run-time reconfigured with smaller value of memory_pools_limit tag. - Added counter for number of clients (Tomi Hakala). - Changed neighbor UP/DOWN algorithm to require 10 failed TCP connections for UP->DOWN transition. - Added 'unique_hostname' configuration option when its necessary to have multiple machines with the same visible hostname. - Fixed pumpReadFromClient() to not read too many bytes on persistent connections. - We can now cache HTTP replies with Set-Cookie. These evil headers are now filtered out for cache hits on the client side. - Fixed SNMP bugs caused by using snmpwalk. - Fixed snmp system Group; all objects are now returned. - Fixed snmp system Group sysDescr and sysContact. - Fixed snmp system Group sysObjectID it now returns a OBJECT IDENTIFIER. - Allocate FwdState from mem pools. - Minor HTCP progress. - Moved 'miss_access' ACL check from client_side.c to forward.c - Fixed logging of usernames for requests which require proxy-authentication. - Fixed HTTP request parser to accept lowercase HTTP identifier (Oskar Pearson). - Fixed FTP listings to always include links to the parent directory (Henrik Nordstrom). - Fixed FTP to show an "empty" listing instead of showing a "document contains no data" error (Henrik Nordstrom). - Fixed refreshCheck() bug. Often it was checking the refresh patterns against the string "[null_mem_obj]" because we moved URLs to MemObject. - Added CARP support by Eric Stern. - Fixed select-spin bug when an ICP reply actually gets queued and we failed to execute the write callback. - Fixed a storeCheckSwapOut bug. We were freeing up to the queued offset instead of the done offset. This resulted in a small chunk of object data not being in memory and not yet written to disk. A client could recieve a partial object because file_read() unexpectedly returns EOF. - Fixed proxy-authentication hangs (Henrik Nordstrom). - Fixed request_t->flags bug causing authenticated, proxied responses to be cached (Arjan de Vet). - Fixed MIME types for .tgz extension (Henrik Nordstrom). - Added view and download options to FTP listings (Henrik Nordstrom). - Modified configure to allow using pre-installed libdlmalloc.a (Masashi Fujita). - Fixed cachemgr 'objects' implementation. - Changed refreshCheck() algorithm. For cached objects, we now check, in the following order: * request max-age * response Expires (if present) * refresh_pattern max-age * response Last-Modified compared to refresh_pattern LM-factor (only if Last-Modified is present) * refresh_pattern min-age - Changed Copyrights. Changes to squid-1.2.beta22 (June 1, 1998): - do not cut off "; parameter" from "digitized" Content-Type http fields - Added X-Request-URI for persistent connection debugging (Henrik Nordstrom) - Added Polish error pages from Maciej Kozinski. - Fixed hash_first/hash_next bugs with **Current pointer. Replaced with *next pointer. - Fixed PUT/POST bugs in client (Henrik Nordstrom). - Deny forwarding loops in httpd accel mode (Henrik Nordstrom). - Fixed eventRun "spin" bug when event delta time == 0. - Fixed setting Last Modified time on cached entries when receiving a 304 reply. - Added while loop in httpAccept(). - Added while loop in icpHandleUdp(). - Fixed some small memory leaks. - Fixed single-bit-int flag checks (Henrik Nordstrom). - Replaced "complex" (offset accounting) calls to snprintf with MemBuf - Do not send only-if-cached cc directive with requests for peer's digests. - Added "automatic tuning" for incoming request rate, i.e. how often to check HTTP and ICP sockets. See comm.c comments for details. Changes to squid-1.2.beta21 (May 22, 1998): - Added Italian error pages by Alessio Bragadini. - Added Estonian error pages by Toomas Soome. - Added Russian (koi-r) error pages by Andrew L. Davydov. - Added Czech error pages by Jakub Nantl. - Fixed asnAclInitialize calling to prevent coredump. - Fixed FTP directory parsing again. - Made FTP directory listing "Generated" tagline like the one for error pages. - Fixed an assertion coredump in statHistCopy from reconfiguring with different #peers in squid.conf - Ignore leading whitespace on requests (and replies). RFC 2068 section 4.1, robustness (Henrik Nordstrom) - Fixed keep_alive bug. We did not always honour reply headers, but rather assumed connections could be persistent. - Fixed reading whois output for AS numbers, especially when they are longer than 4 KB. - Removed 'cache_stoplist_pattern' configuration option. This feature is now handled by 'no_cache'. - If a URN resolves to only one URL, just return it immediately instead of giving the user a "choice" (Andy Powell). - Fixed year-2000 bug in lib/iso3307.c (Henrik Nordstrom). - Changed squid-internal object names. - Added netdb exchange protocol. - Fixed wordlistDestroy() uninitialized pointer bug in ftpParseControlReply. - Fixed redirector subprocess to show real program name. - Changed URN menu output to be sorted. - Added fast select(2) timeouts when using ASYNC_IO. - Added ARP ACL support for Linux (David Luyer). - Added binary http headers to requests - request_t objects are now created and destroyed in a consistent way - Fixed cache control printf bug - Added a lot of new http header ids - Improved Connection: header handling; now both Connection and Proxy-Connection headers are checked for connection directives - Connection request header is now handled correctly regardless of its position and the number of entries - Only replies with valid Content-Length can be sent with keep-alive connection directive (Henrik Nordstrom) - Better handling of persistent connection "clues" in HTTP headers; the decision now depends on HTTP version (and User-Agent exceptions) - Removed handling of "length=" directive in IMS headers; the directive is not in the HTTP/1.1 standard; standing by for objections - allowed/denied headers are now checked using bit masks instead of strcmp loops - removed Uri: from allowed headers; Uri is deprecated in RFC 2068 - removed processing of Request-Range header (not in specs?) - Fixed byte-order bugs in cacheDigestHashKey. - Changed hash_remove_link() to return void. - Changed ipcache_gethostbyname() to return NULL if i->addrs.count == 0. - Added millisecond-timing to select/poll loops and event queue. - Changed 'peerPingTimeout' value to be twice the average of all the peer ICP RTT's. - Added 'half_closed_clients' option to force closing of client connections which might only be half-closed. - Fixed matchDomainName coredump bug. - Don't cache HTTP replies with Vary: headers until we get content negotiation working. - Fixed SSL proxying to forward full HTTP request headers. - Changed storeGetMemSpace(). Only purge down to the HIGH water mark; move locked entries to the head of the inmem list. - Changed clientReadRequest() to locally handle any "squid-internal-static" URL for any host. - Disable persistent connections for client connections from broken Netscape User-Agent, version 3.* (Stewart Forster) Changes to squid-1.2.beta20 (April 24, 1998): - Improved support for only-if-cached cache control directive. - Enabled 304 replies for ENTRY_SPECIAL objects (e.g., icons). - Fixed 'quick_abort' percent calculation bug. - Fixed quick_abort FPE bug. - Changed more errno-checking functions to use ignoreErrno(). - Added ERESTART to ignoreErrno() because of report from a Solaris system. - Fixed '#elsif' typo. - Fixed MemPool assertion by moving memInit() to before configuration parsing functions. - Fixed default 'announce_period' value (was 1 day, should be 0) (Joe Ramey). - Added configure warning for low filedescriptors and pointer to FAQ. - Fixed httpBodySet() bug causing URN related coredumps. - Changed ipcacheCycleAddr() to always cycle through all all available addresses, and not just advance when one of them goes BAD. - Fixed squid-internal bug for mixed-case hostnames (Henrik Nordstrom). - Fixed ICP counting probelm. icpUdpSend() arg should be LOG_ICP_QUERY instead of LOG_TAG_NONE. - Added some additional fault toleranse on FTP data channels (Henrik Nordstrom). - Corrected error reporting on FTP "hacks" (Henrik Nordstrom). - Added lock/unlock for StoreEntry during storeAbort(). - Added filemap bit usage stats to cachemgr 'storedir' and 'info'. - Replaced 'cache_stoplist' with 'no_cache' Access list. - Fixed (hopefully) remaining swapfile-open-at-exit bugs. - Fixed default hierarchy_stoplist to be ``default if none.'' - Fixed 'fake a recent reply' hack for detecting DEAD and ALIVE neighbors (Joe Ramey). - Fixed FTP directory parsing bugs (Joe Ramey). - Fixed ftpTraverseDirectory coredump for NULL ftpState->filepath (Joe Ramey). - Fixed daylight savings time bug (again). - A lot of Cache Digests additions, fixes, and tuning. Cache Digests are still "very experimental". - Fixed snprintf() bug. When len == 1, snprintf() would treat the buffer as unknown size, emulating sprintf() behaviour. - Made Error page language configurable with configure script (Henrik Nordstrom). - Fixed squid-internal URLs when http_port == 80. - Remember the client address on redirected requests (Henrik Nordstrom). - Don't rebuild the request if the redirector returned the same URL (Henrik Nordstrom). - Rewrite Host: header on redirected requests (Henrik Nordstrom). - Include port (if non-standard) in generated Host: headers (Henrik Nordstrom). - Fixed rfc1123 timezone hacks for Windows NT (Henrik Nordstrom). - Added Russian Error pages by Ilia Zadorozhko. - Added totals for ICP and HTTP hits to cachemgr client_list output. - Changed error message to 'Generated TIME by HOST (SQUID/VER)' because any string with an '@' must be an email address. - Fixed POST for content-length == 0. - Fixed "huge 304 reply" loop bug. - Fixed --enable-splaytree compile bugs. - Removed ASN lookup code in peer_select.c. - Added warnings if ACL code detects subdomains in SPLAY trees. - Rewrote some bits of httpRequestFree() to eliminate possible bugs that could cause an "e->lock_count" asseertion. - Added value/bounds checking to _db_init() when setting the debugLevels[] array. Changes to squid-1.2.beta19 (Apr 8, 1998): - Squid-1.2.beta19 compiles and runs on Windows/NT with Cygnus Gnu-WIN32 b19 (Henrik Nordstrom). - Added French Error pages by Frank DENIS. - Added Dutch Error pages by Mark Visser - Added German Error pages by Bernd P. Ziller, Jens Frank, and Anke S. - Added support for only-if-cached cache-control directive. - Added RELAXED_HTTP_PARSER #define to allow requests which are missing the HTTP identifier on the request line (e.g. buggy SpyGame queries). RELAXED_HTTP_PARSER is undefined by default. - Fixed disk.c FD leak for delayed closes in diskHandleWriteComplete(). - Fixed cache announcement feature. - Fixed httpReadReply() to retry failed HTTP requests on persistent connections when read() returns -1, not only when it returns 0. - Fixed cbdata memory counting leak. cbdataUnlock() always called free(), never memFree(). - Fixed storeDirWriteCleanLogs() malloc bug on Alphas. - Fixed `++loopdetect < 10' assertion due to clientHandleIMSReply bug for invalid/partial HTTP replies. - Added preliminary code for HTCP. - Renamed 'aux' dir to 'cfgaux' for legacy DOS machines. - Added "snmp_community" as an ACL type. - Cleaned up proxy-auth acl implementation and removed memory leaks. - Added generic 'hashFreeItems()' function for efficiently freeing hash table pointers. - Added whoisTimeout() for ASN code. - Removed BINARY TREE code. - Fixed forgetting to reset Config.Swap.maxSize in configDoConfigure. - Fixed httpReplyUpdateOnNotModified() arguments-in-wrong-order bug which caused not modified replies to not get updated. - Fixed client_side.c bugs which could cause data to be written to the client in the wrong order for persistent connections. clientPurgeRequest() and clientHandleIMSComplete() must not call comm_write(). Instead they must create and write to StoreEntry's. - Fixed ICP query service time counting bug(s). - replaced 'char *mime_headers_end()' with 'size_t headersEnd()' to fix buffer overruns. This also requires adding 'buf_sz' args to some functions like clientBuildReplyHeader(). But we can eliminate the need to NULL-terminate the buffer beforehand. - Changed commConnectCallback() to reset the FD timeout to zero before notifying about the connection. This requires commSetTimeout() calls in numerous places to reinstall timeouts. - Changed comm_poll_incoming() to be called less frequently (every 15 I/O's instead of every 7 FD's) (Michael O'Reilly). - Removed HAVE_SYSLOG case for debug() macro. Almost all systems do have syslog(), but more importatnly the _db_level value is needed for debugging to stderr. - Rewrote squid/dnsserver interface to use smaller, single-line messages. - Rewrote 'dns' cachemgr output to use a table format. - Rewrote a lot of dnsserver.c. - Added eventAddIsh() for semi-random event scheduling. - Fixed an ftpTimeout bug for sessions which use PORT commands. - Fixed ftp.c to recognized invalid PASV replies (e.g. port == 0). - Removed hash_insert(). All hasing uses hash_join() now. - Renamed hash_unlink() to hash_remove_link(). - Added hashPrime() to find closes prime hash table size to a given value. - Fixed Keep-Alive ratio counting bug which prevented persistent connections from being used between cache peers. - Changed icmp.c to NOT queue messages sent from squid to the pinger program. - Changed icp_v2.c to NOT queue ICP messages by default. But they will be queued and resent once if the first send fails. Counters.icp.queued_replies counts the number of messaages queued. - Cleaned up ICP logging. - Added identTimeout(). - Fixed ipcache reply counting bug. Overcounted dnsserver replies for partial replies. - Added urlInternal() for building internal Squid URLs. - Changed peerAllowedToUse() to check both 'cache_peer_domain' AND 'cache_peer_acl' configurations. This should be changed in the fugure to use ONLY cache_peer_acl. - Changed DEAD/REVIVED neighbor detection to avoid reporting so many false deaths. (Joe Ramey). - Added some preliminary code to support "cache digests." - Fixed pumpClose() coredumps (?). - Updated cachemgr 'info' output to show median service times for various categories. - Fixed ABW bug in storeDirWriteCleanLogs(). sizeof(off_t) != sizeof(int) for Alphas. - Fixed potential alignment problem in storeDirWriteCleanLogs(). - Fixed store_rebuild.c to NOT replace current, but not-swapped-out StoreEntry's with on-disk entries. - Changed storeCleanup() to call storeRelease on invalid entries which don't have a swapfile (i.e. no unlink() penalty). - Fixed storeSwapInStart() to fail for unvalidated entries. - SNMP changes: . renovated mib and added descriptions and comments . added hit and byte counters to client_db , for cacheClientTable . cacheClientTable, netdbTable, cachePeerTable, cacheConnTable now indexed by ip address. hash_lookup was enhanced to allow for subsequent hash_next's similar to hash_first, to speed up getnext's in tables which refer to hash-table structures. . added generic (well, sorf of) table indexing functionality . added makefile dependencies for snmplib and cache_snmp.h . WaisHost, WaisPort, Timeouts removed . FdTable split into FdTable and ConnTable. FdTable simplified . PeerTable and PeerStat merged and put into new cacheMesh group . cacheClientTable added for client statistics and accounting (cacheMesh 2) . cacheSec and cacheAccounting groups removed . fixed acl bug when communities not defined . snmp_acl now survives bad configuration Changes to squid-1.2.beta18 (Mar 23, 1998): - Added v1.1 'test_reachability' option. - Fixed hash4() len == 0 bug. - Fixed Config.Swap.maxSize reconfigure bug. - Fixed ICP query bug determining request method. - Moved ICP's storeGet() cache lookup into neighborsUdpAck() so that we know neighbors are alive even when they send us replies for unknown entries. - Changed configure script to add '-std1' for Digital Unix cc. - Fixed SNMP sizeof(int) / sizeof(long) bugs for 64-bit systems. - Added support for 'Cache-Control: Only-If-Cached' request header. - Fixed CheckQuickAbort() bugs for multiple clients on one StoreEntry. Also changed storePendingNClients() to return mem->nclients instead of counting the number of store_client entries with pending callback functions. Changes to squid-1.2.beta17 (Mar 17, 1998): - SNMP MIB version check changed to non-rcs. - Added memory pools for variable size objects (strings). There are three pools; for small, medium, and large objects. - Extended String object to use memory pools. Most fixed size char array fields will be replaced using string pools. Same for most malloc()-ed buffers. - Changed icon handling to use the hostname and port of the squid server, instead of the special hostname "internal.squid" (Henrik Nordstrom). - All icons are now configured in mime.conf. No hardcoded icons, including gohper icons (Henrik Nordstrom). - Fixed ICP bug when we send queries, but expect zero replies. - Fixed alignment/casting bugs for ICP messages. - A generic client-to-server "pump" was added to handle HTTP PUT as well as POST methods on the client-cache side. Based on "pump" PUT requests can be made to either HTTP or FTP url's. Code is still beta and interoperability with browsers etc has not been tested. - Put #ifdefs around 'source_ping' code. - Added missing typedef for _arp_ip_data (Wesha). - Added regular-expression-based ACLs for client and server domain names (Henrik Nordstrom). - Fixed ident-related coredumps from incorrect callback data. - Fixed parse_rfc1123() "space" bug. - Fixed xrealloc() XMALLOC_DEBUG bug (not calling check_free()).. - Fixed some src/asn.c end-of-reply bugs and memory leaks. - Fixed some peer->options flag-setting bugs. - Fixed single-parent feature to work again - Removed 'single_parent_bypass' configuration option; instead just use 'no-query'. - Surrounded 'source_ping' code with #ifdefs. - Changed 'deny_info URL' to use a custom Error page. - Modified src/client.c for testing POST requests. - Fixed hash4() for SCO (Vlado Potisk). Changes to squid-1.2.beta16 (Mar 4, 1998): - Added Spanish error messages from Javier Puche. - Added Portuguese error messages from Pedro Lineu Orso - Added a simple but very effective hack to cachemgr.cgi that tries to interpret lines with '\t' as table records and formats them accordingly. With a few exceptions (see source code), first line becomes a table heading ("" html tag) and the rest is formated with "" tags. - Added "mem_pools_limit" configuration option. Semantics of "mem_pools" option has also changed a bit to reflect new memory management policy. - Reorganized memory pools. Squid now supports a global pool limit instead of individual pool limits. Per-pool limits can be implemented on top of the current scheme if needed, but it is probably hard to guess their values. Squid distributes pool memory among "frequently allocated" objects. There is a configurable limit on the total amount of "idle" memory to be kept in reserve. All requests that exceed that amount are satisfied using malloc library. Support for variable size objects (mostly strings) will be enabled soon. - memAllocate() has now only one parameter. Objects are always reset with 0s. (We actually never used that parameter before; it was always set to "clear"). - Added Squid "signature" to all ERR_ pages. The signature is hardcoded and is added on-the-fly. The signature may use %-escapes. Added interface to add more hard-coded responses if needed (see errorpage.c::error_hard_text). - Both default and configured directories are searched for ERR_ pages now. Configured directory is, of course, searched first. This allows you to customize a subset of ERR_ pages (in a separate directory) without danger of getting other copies out of sync. - Security controls for the SNMP agent added. Besides communities (like password) and views (part of tree accessible), the snmp_acl config option can be used to do acl based access checks per community. - SNMP agent was heavily re-written, based on cmu-snmpV1.8. You can now walk through the whole mib tree. Several new variables added under cacheProtoAggregateStats - Added rudimental statistics for HTTP headers. - Adjusted StatLogHist to a more generic/flexible StatHist. Moved StatHist implementation into a separate file. - Added FTP support for PORT if PASV fails, also try the default FTP data port (Henrik Nordstrom). - Fixed NULL pointer bug in clientGetHeadersForIMS when a request is cancelled for fails on the client side. - Filled in some squid.conf comments (never_direct, always_direct). - Added RES_DNSRCH to dnsserver's _res.options when the -D command line option is given. - Fixed repeated Detected DEAD/REVIVED Sibling messages when peer->tcp_up == 0 (Michael O'Reilly). - Fixed storeGetNextFile's incorrect "directory does not exist" errors (Michael O'Reilly). - Fixed aiops.c race condition (Michael O'Reilly, Stewart Forster). - Added 'dns_nameservers' config option to specify non-default DNS nameserver addresses (Maxim Krasnyansky). - Added lib/util.c code to show memory map as a tree (Henrik Nordstrom). - Added HTTP and ICP median service times to Counters and cachemgr average stats. - Changed "-d" command line option to take debugging level as argument. Debugging equal-to or less-than the argument will be written to stderr. - Removed unused urlClean() function from url.c. - Fixed a bug that allowed '?' parts of urls to be recorded in store.log. Logged urls are now "clean". - Cache Manager got new Web interface (cachemgr.cgi). New .cgi script forwards basic authentication from browser to squid. Authentication info is encoded within all dynamically generated pages so you do not have to type your password often. Authentication records expire after 3 hours (default) since last use. Cachemgr.cgi now recognizes "action protection" types described below. - Added better recognition of available protection for actions in Cache Manager. Actions are classified as "public" (no password needed), "protected" (must specify a valid password), "disabled" (those with a "disable" password in squid.conf), and "hidden" (actions that require a password, but do not have corresponding cachemgr_passwd entry). If you manage to request a hidden, disabled, or unknown action, squid replies with "Invalid URL" message. If a password is needed, and you failed to provide one, squid replies with "Access Denied" message and asks you to authenticate yourself. - Added "basic" authentication scheme for the Cache Manager. When a password protected function is accessed, Squid sends an HTTP_UNAUTHORIZED reply allowing the client to authorize itself by specifying "name" and "password" for the specified action. The user name is currently used for logging purposes only. The password must be an appropriate "cachemgr_passwd" entry from squid.conf. The old interface (appending @password to the url) is still supported but discouraged. Note: it is not possible to pass authentication information between squid and browser *via a web server*. The server will strip all authentication headers coming from the browser. A similar problem exists for Proxy-Authentication scheme. - Added ERR_CACHE_MGR_ACCESS_DENIED page to notify of authentication failures when accessing Cache Manager. - Added "-v" (Verbose) and "-H" (extra Headers) options to client.c. - Added simple context-based debugging to debug.c. Currently, the context is defined as a constant string. Context reporting is triggered by debug() calls. Context debugging routines print minimal amount of information sufficient to describe current context. The interface will be enhanced in the future. - Replaced _http_reply with HttpReply. HttpReply is a stand-alone object that is responsible for parsing, swapping, and comm_writing of HTTP replies. Moved these functions from various modules into HttpReply module. - Added HttpStatusLine, HttpHeader, HttpBody. - All HTTP headers are now parsed and stored in a "compiled" form in the HttpHeader object. This allows for a great flexibility in header processing and builds basis for support of yet unsupported HTTP headers. - Added Packer, a memory/store redirector with a printf interface. Packer allows to comm_write() or swap() an object using a single routine. - Added MemBuf, a auto-growing memory buffer with printf capabilities. MemBuf replaces most of old local buffers for compiling text messages. - Added MemPool that maintains a pre-allocated pool of opaque objects. Used to eliminate memory thrashing when allocating small objects (e.g. field-names and field-value in http headers). Changes to squid-1.2.beta15 (Feb 13, 1998): NOTE: This version has changes which may cause all or part of your cache to be lost. However, you can problably save most of it by doing a slow restart. Specifically: 1. Kill the running squid-1.2.beta14 process; wait for it to fully exit. 2. Remove all 'swap.state*' files, either in each cache_dir, or as defined in your squid.conf 3. Start squid-1.2.beta15. The store will be rebuilt from the existing swap files, reading the directories and opening the files. - Fixed some problems related to disk (and pipe) write error handling. file_close() doesn't always close the file immediately; i.e. when there are pending buffers to write. StoreEntry->lock_count could become zero while a write is pending, then bad things happen during the callback. - The file_write() callback data must now be in the callback database (cbdata). We now use the swapout_ctrl_t structure for the callback data; it stays around for as long as we are swapping out. - Changed the way write errors are handled by diskHandleWrite. If there is no callback function, now we exit with a fatal message under the assumption that the file in question is a log file or IPC pipe. Otherwise, we flush all the pending write buffers (so we don't see multiple repeated write errors from the same descriptor) and let the upper layer decide how to handle the failure. - Fixed storeDirWriteCleanLogs. A write failure was leaving some empty swap.state files, even though it tells us that its "not replacing the file." Don't flush/rename logs which we have prematurely closed due to write failures, indiciated by fd[dirn] == -1. Close these files LAST, not before renaming. - Fixed storeDirClean to clean directories in a more sensible order, instead of the new "MONOTONIC" order for swap files. - Merged fdstat.c functions into fd.c. - Cleaned up some debugging sections. Some unrelated source files were using the same section. - Removed curly brackets from all cachemgr output. - Removed unused filemap->last_file_number_allocated member. - Removed unused fde->lifetime_data member. - Fixed incorrectly applying htonl() on icp_common_t->shostid. - Call setsid() before exec() in ipc.c so that child processes don't receive SIGINT (etc) when running squid on a tty. - Changed StoreEntry->object_len to ->swap_file_sz so we can verify the disk file size at restart. Moved object_len to MemObject->object_sz. Note object_sz is initialized to -1. If object_sz < 0, then we need to open the swap file and read the swap metadata. - Changed store_client->mem to ->entry because we need e->swap_file_sz to set mem->object_sz at swapin. - Renamed storeSwapData structure to storeSwapLogData. - Fixed storeGetNextFile to not increment d->dirn. Added check for opendir() failure. - Fixed storeRebuildStart to properly link the directory list for storeRebuildfromDirectory mode. - Added -S command line option to double-check store consistency with disk files in storeCleanup(). - Fixed a problem with transactional logging. In many cases we were adding the public cache key and then logging a delete for the private key. This is worthless because during rebuild we could not locate the previous public-keyed entry. Now we assert that only public-keyed entries can be logged to swap.state. storeSetPublicKey() and storeSetPrivateKey() have been modified to log an ADD or DEL when the key changes. - Fixed storeDirClean bug. Needed to call storeDirProperFileno() so the "dirn bits" get set. - Fixed a storeRebuildFromDirectory bug. fullpath[] and fullfilename[] were static to that function and did not change when the "rebuild_dir" arg did. Moved these buffers to the rebuild_dir structure. - In storeRebuildFromSwapLog, we were calling storeRelease() for cache key collisions. This only set the RELEASE_REQUEST bit and did not clear the swap_file_number in the filemap or in the StoreEntry, so the swap file could get unlinked later when it was really released. - Fixed FTP so that ';type=X' specifically sets the HTTP reply content-type and content-encoding (Henrik Nordstrom). - Removed 'icon_content_type' configuration option. Content types now taken from mime.conf (Henrik Nordstrom). - Added additional memory malloc tracing and memory leak detection. Use --enable-xmalloc-debug-trace configure option and -m command line option (Henrik Nordstrom). Changes to squid-1.2.beta14 (Feb 6, 1998): - Replaced snmplib free() calls with xfree(). - Changed the 'net_db_name' hash table structure to make it easier to move names from one network to another (copied from 1.1 code). - Filled in some of the config dump routines (dump_acl, dump_acl_access). - Full memory debugging option (--enable-xmalloc-debug-trace) (Henrik Nordstrom). - Filled-in and clarified many squid.conf comments (Oskar Pearson). - Fixed up handling of SWAP_LOG_DEL swap.state entries. Changes to squid-1.2.beta13 (Feb 4, 1998): - NOTE: With this version the "swap.state" file format has changed. Running this version for the first time will cause your current cache contents to be lost! - NOTE: this version still has the bug where we don't rewind a swapout file and rewrite the swap meta data. Objects larger than 8KB will be lost when rebuilding from the swap files. - Combined various interprocess communication setup functions into ipcCreate(). - Removed some leftover ICP_HIT_OBJ things. - Removed cacheinfo and proto_count() and friends; these are to be replaced in functionality by StatCounters and 5/60 minute average views via cachemgr. - Fixed --enable-acltree configure message (Masashi Fujita). - Fixed no reference to @LIB_MALLOC@ in src/Makefile.in (Masashi Fujita). - Fixed building outside of source tree (Masashi Fujita). - FTP: Format NLST listings, and inform the user that the NLST (plain) format is available when we find a LIST listing that we don't understand (Henrik Nordstrom) - FTP: Use SIZE on Binary transfers, and not ASCII. The condition was inversed, making squid use SIZE on ASCII transfers (Henrik Nordstrom). - Enable virtual and Host: based acceleration in order to be able to use Squid as a transparent proxy without breaking either virtual servers or clients not sending Host: header the order of the virtual and Host: based acceleration needs to be swapped, giving Host: a higher precendence than virtual host (Henrik Nordstrom). - Use memmove/bcopy as detected by configure Some systems does not have memmove, but have the older bcopy implementation (Henrik Nordstrom). - Completely rewritten aiops.c that creates and manages a pool of threads so thread creation overhead is eliminated (SLF). - Lots of mods to store.c to detect and cancel outstanding ASYNC ops. Code is not proven exhaustive and there are definately still cases to be found where outstanding disk ops aren't cancelled properly (SLF). - Changes to call interface to a few routines to support disk op `tagging', so operations can be cleanly cancelled on store_abort()s (SLF). - Implementation of swap.state files as transaction logs. Removed objects are now noted with a negative object size. This allows reliatively clean rebuilds from non-clean shutdowns (SLF). - Now that the swap.state files are transaction logs, there's now no need to validate by stat()ing. All the validation procedure does is now just set the valid bit AFTER all the swap.state files have been read, because by that time, only valid objects can be left. Object still need to be marked invalid when reading the swap.state file because there's no guarantee the file has been retaken or deleted (SLF). - An fstat() call is now added after every storeSwapInFileOpened() so object sizes can be checked. Added code to storeRelease() the object if the sizes don't match (SLF). - #defining USE_ASYNC_IO now uses the async unlink() rather than unlinkd() (SLF). - #defining MONOTONIC_STORE will support the creation of disk objects clustered into directories. This GREATLY improves disk performance (factor of 3) over old `write-over-old-object' method. If using the MONOTONIC_STORE, the {get/put}_unusedFileno stack stuff is disabled. This is actually a good thing and greatly reduces the risk of serving up bad objects (SLF). - Fixed unlink() in storeWriteCleanLogs to be real unlink() rather than ASYNC/unlinkd unlinks. swap.state.new files were being removed just after they were created due to delayed unlinks (SLF). - Disabled various assertions and made these into debug warning messages to make the code more stable until the bugs can be tracked down (SLF). - Added most of Michael O'Reilly's patches which included many bug fixes. Ask him for full details (SLF). - Moved aio_check_callbacks in comm_{poll|select}(). It was called after the fdset had been built which was wrong because the callbacks were changing the state of the read/write handlers prior to the poll/select() calls (SLF). - Fixed ARP ACL memory leaks (Dale). - Eliminated URL and SHA cache keys. Cache keys will always be MD5's now. - Fixed up store swap meta data. - Changed swap.state logs to a binary format. - The swap.state logs are written transaction-style. Changes to squid-1.2.beta12 (Jan 30, 1998): - Added metadata headers to cache swap files. This is an incompatible change with previous versions. Running this version for the first time will cause your current cache contents to be lost. - -D_REENTRANT when linking with -lpthreads (Henrik Nordstrom) - Show symlink destinations as a hyperlink in FTP listings (Henrik Nordstrom) - Fixed not allocating enough space for rewriting URLs with the Host: header (Eric Stern). - Year-2000 fixes (Arjan de Vet). - Fixed looping for cache hits on HEAD requests. - Fixed parseHttpRequest() coredump for "GET http://foo HTTP/1.0\r\n\r\n\r\n" Changes to squid-1.2.beta11 (Jan 6, 1998): - Fixed fake 'struct rusage' definition which prevented compling on Solaris 2.4. - Fixed copy-by-ref bug for request->headers in clientRedirectDone() (Michael O'Reilly). - Workaround for Solaris pthreads closing FD 0 upon fork() (Michael O'Reilly). - Fixed shutdown bug with outgoing UDP sockets; we need to disable their read handlers. - For comm_poll(), use the fast 50 msec timeout only when USE_ASYNC_IO is defined. - Fixed pointer bug when freeing AS# ACL entries. - Fixed forgetting to reset Config.npeers to zero in free_peer(). - Fixed ICP bug causing excessive TIMEOUTs with sibling neighbors. We must call the ICP reply callback even for sibling misses. - Fixed some dnsserver-related reconfigure bugs. Need to use cbdataLock, etc in fqdncache.c. Also don't want to use ipcacheQueueDrain() and fqdncacheQueueDrain(). - Fixed persistent connection bug. We were incorrectly deciding that non-200 replies without content-length would not have a reply body. - Fixed intAverage() precedence bug. - Fixed memmove() 'len' arg bug. - Changed algorithm for determining alive/dead state of peers. Instead of using a fixed number of unacknowledged ICP replies, it is now based on timeouts. If there are no ICP replies received from a peer within 'dead_peer_timeout' seconds, then we call it dead. - Added calls to getCurrentTime() in comm_{select,poll}_incoming() when ALARM_UPDATES_TIME is not being used. - Fixed shutdown bug when the incoming and outgoing ICP socket is the same file descriptor. - Added buffered writes for storeWriteCleanLogs() (Stewart Forster). - Patches for Qnx4 (Jean-Claude MICHOT). - Fixed returning void functions which seems to be a GCC-ism. - New configure script options (Henrik Nordstrom): --enable-new-storekey=[sha|md5(|url)] (was --enable-hashkey) --enable-acltree --enable-icmp --enable-delay-hack --enable-useragent-log --enable-kill-parent (this should be named -hack) --enable-snmp --enable-time-hack --enable-cachemgr-hostname[=hostname] (new) --enable-arp-acl (new) - Added Doug Lea malloc-2.6.4 to the distribution, so that people easily can try a decent malloc package if they syspect their malloc is broken. --enable-dlmalloc (Henrik Nordstrom). - Made XMALLOC_DEBUG_COUNT working again. Requires a small stub function (Henrik Nordstrom). - Removed top-level Makefile. People must now run 'configure' before 'make'. - Fixed checkFailureRatio() implementation. - Made 'squid -z' behave like the 1.1 version. Changes to squid-1.2.beta10 (Jan 1, 1998): - Fixed content-length bugs for 204 replies, 304 replies, and HEAD requests (Henrik Nordstrom). - Fixed errorAppendEntry() bug in gopherReadReply(). - Basic support for FTP URL typecodes (;type=X). - Support for access controls based on ethernet MAC addresses (Dale). - Initial URN support; see http://squid.nlanr.net/Squid/urn-support.html - Fixed client-side persistent connections for objects with bad content lengths (Henrik Nordstrom). - Fixed bad call to storeDirUpdateSwapSize() for objects which never reach SWAPOUT_DONE state. - Fixed up poll() #defines in squid.h (Stewart Forster). - Changed poll() timeout from 1000 msec to 50 msec for better performance under low load (Stewart Forster). - Changed storeWriteCleanLogs() to write objects in the LRU list order instead of the random hash table order. - Fixed FTP bug when data socket connections fail or timeout. - Reuse FTP data connection when possible (Henrik Nordstrom). - Added configure options (Henrik Nordstrom) --enable-store-key=sha|md5 --enable-xmalloc-statistics --enable-xmalloc-debug --enable-xmalloc-debug-count --async-io - Fixed confusing with the use/meaning of ERR_CANNOT_FORWARD by creating ERR_FORWARDING_DENIED and changing the content of the ERR_CANNOT_FORWARD text. - Fixed pipeline request bug from using strdup() (Henrik Nordstrom). - Call clientReadRequest() directly instead of commSetSelect() for pipelined requests (Henrik Nordstrom). - Fixed 4k page leak in icpHandleIMSReply(); - Renamed 'icp*' functions to 'client*' names in client_side.c. Changes to squid-1.2.beta8 (Dec 2, 1997): - Fixed accessLogLog() to log ident from Proxy-Authorization request header (BoB Miorelli). - Fixed #includes, prototypes, etc. in SNMP source files. - Moved 'POLLRDNORM' and 'POLLWRNORM' macro checks from include/config.h.in to src/squid.h - Moved 'num32' typedefs from src/typedefs.h to include/config.h.in. - Moved snmplib/md5.c to lib/md5.c. - Added MD5 cache key support. - Removed xmalloc() return check in uudeocde.c - Added 'ifdef' support to cf_gen.c for optional code (e.g. SNMP) - Changed 'client' program to provide easier cache manager access, e.g.: 'client mgr:info' - Fixed 'client' to send 'Connection' instead of 'Proxy-Connection' for simulated keep-alive requests. - Removed 'fd' arg from clientProcess* functions. - Fixed bugs from using errorSend() on persistent/pipelined client connections. A latter request should not be allowed to write to the client fd until the current request completes. Now use errorAppendEntry() for such situations. - Fixed content-length bugs. We were using content-length == 0 to also indicate a lack of content-length reply header. But 'content-length: 0' might appear in a reply, so now use -1 to indicate that no content length given. - Split up clientProcessRequest() into smaller chunks so it might be easier to follow. - renamed various client_side.c functions to start with 'client' instead of 'icp'. - Fixed a 'cbdata leak' from the comm.c close handlers. - Fixed a 'cbdata leak' from the comm.c connect routines. - Fixed comm_select() and comm_poll() to stop looping on the incoming HTTP/ICP sockets. If there are fewer than 7 FD's ready for I/O, the incoming sockets might not get service, so comm_select() would be called for up to 7 times until the 'incoming_counter' was incremented enough to trigger a call to comm_select_incoming(). Now we make sure comm_select_incoming() gets called if select returns less than 7 ready FD's. - Added errorpage '%B' token to generate FTP URLs with a '%2f' inserted at the start of the url-path. calls ftpUrlWith2f(). (Henrik Nordstrom). - Changed fqdncache.c to use LRU double-linked list instead of qsort() for replacement and cachemgr output. - Changed ipcache.c to use LRU double-linked list instead of qsort() - Changed hash_insert() and hash_join() to return void. for replacement and cachemgr output. - Moved StoreEntry->method member to MemObject->method. - Made StoreEntry->flags 16 bits. - Made StoreEntry->refcount 16 bits. - Changed URL-based public cache key to always include the request method. Changes to squid-1.2.beta7 (Nov 24, 1997): - Fixed poll() for Linux (David Luyer). - SHA optimizations (David Luyer). - Fixed errno clashes with macro on Linux (David Luyer). - Fixed storeDirCloseSwapLogs(); logs might not be open. - Fixed storeClientCopy2() bug. Detect when there is no more data to send for objects in STORE_OK state. - Fixed FTP truncation bug when ftpState->size == 0, e.g. especially directory listings. - Mega FTP fix from Henrik Nordstrom. A better job of implementing the '%2f' hack. - Fixed some pipelined request bugs. storeClientCopy() was being given the wrong StoreEntry, and we had a race condition which is now handled by storeClientCopyPending(). - Added initial SNMP support. Changes to squid-1.2.beta6 (Nov 13, 1997): - Fixed Authorized responses getting swapped out when they don't have Proxy-Revalidate reply header. - Fixed Proxy Authentication support. We never sent back a 407 reply, and were incorrectly incrementing the passwd before comparing it. - Fixed stat()ing pathnames for default values before parsing config file (Ron Gomes). - Fixed logging request and response headers on separate lines (Ron Gomes). - Fixed FTP Authentication message (Henrik Nordstrom). - Changed Proxy Authentication to trigger a reread of the passwd file if a password check fails (Henrik Nordstrom). - Changed FTP to retry the first CWD with a leading slash if it fails without one. Changes to squid-1.2.beta5 (Nov 6, 1997): - Track the 'keep-alive ratio' for a peer as the ratio of the number of replies including 'Proxy-Connection: Keep-Alive' compared to the number of requests sent. If the peer does not support Persistent connections then this ratio will tend toward zero. If the ratio is less than 50% after 10 requests then we'll stop sending Keep-Alive. - Proper support for %nn escapes in FTP, and numerous other fixes (Henrik Nordstrom). - Support for Secure Hash Algorithm and framework for other hash functions as cache keys. - Fixed SSL snprintf() bug which broke SSL proxying. - Fixed store_dir swap log bug from reconfigure (SIGHUP). - Fixed LRU Reference Age bug. The arg to pow() must be minutes, not seconds. Changes to squid-1.2.beta4 (Oct 30, 1997): - Fixed DST bug in rfc1123.c - Changed default http_accel_port to 80. - added errorCon() as a ErrorState constructor function (Max Okumoto). - Added ERR_FTP_FAILURE message for ftpFail(). - For FTP, the timeout callback must be moved to the 'data' descriptor when data transfer begins. Otherwise we are likely to get a timeout on the control descriptor. - Fixed double-free bug in httpRequestFree(). - Fixed store_swap_size counting bug in storeSwapOutHandle(). Changes to squid-1.2.beta3 (Oct 29, 1997): - Initialize _res.options to RES_DEFAULT in dnsserver.c. - Fix assertions which assumed 4-byte pointers. - Fix missing % in fqdncache.c snprintf(). Changes to squid-1.2.beta2 (Oct 28, 1997): - Fixed aiops.c and async_io.c so that they actually compile with USE_ASYNC_IO (Arjan de Vet). - Fixed errState->errno causing problems with some macros (Michael O'Reilly). - Fixed memory leaks in pconn.c (Max Okumoto). - Enhanced 'client' program with 'ping' behaviour (Ron Gomes). - Fixed InvokeHandlers() from calling memCopy() for ALL store_client's with callbacks. A store_client might be reading from disk. - Rewrote storeMaintainSwapSpace(). No longer will we scan one bucket at a time. Instead we'll maintain a single LRU list. When an object is 'touched' we move it to the top of this list. When we need disk space, we delete from the bottom. - Removed storeGetSwapSpace(). Changes to squid-1.2.beta1 (): - Reworked storage manager to not keep objects in memory during transit. In other words, no separate NOVM distribution. - Lots of cleanup and debugging for beta release. - Use snprintf() everywhere instead of sprintf(). - The 'in_memory' hash table has been replaced with a doubly-linked list. New objects are added to the head of the list. When memory space is needed, old objects are purged from the tail of the list. Changes to squid-1.2.alpha7 (): - fixes fixes fixes. - Made Arjan's PROXY_AUTH ACL patch standard. Changes to squid-1.2.alpha6 (): - Simpler cacheobj implementation. - persistent connection histogram - SERVER-SIDE PERSISTENT CONNECTIONS: - Added pconn.c - Addec Cofig.Timeout.pconn; default 120 seconds - Added httpState->flags - Added flags arg to httpBuildRequestHeader() - Added HTTP_PROXYING and HTTP_KEEPALIVE flags - Added 'Connection' to allowed HTTP headers (http-anon.c) - Added 'Proxy-Connection' to allowed HTTP headers (http-anon.c) - Merged proxyhttpStart() with httpStart() and created new httpBuildState(). - New httpPconnTransferDone() detects end-of-data on persistent connections. Changes to squid-1.2.alpha5 (): - New configuration system. Everything is generated from 'cf.data.pre', including the main parser, setting defaults, outputting current values, and freeing memory. This also involved moving some of the local data structures (e.g. struct _acl *AclList in acl.c) to the Config structure. (Max Okumoto) - No more '/i' for regular expressions. Now insert a '-i' to switch to case-insensitive. Use '+i' for case-sensitive. - When you have a variable named the same as its type, sizeof() gets the wrong one (fde). - Need to flush unbuffered logs before fork(). - Added two fields swap log: refcount and e->flag. - Removed all the .h files for each .c file. Now #include stuff is in either: defines.h, enums.h, typedefs.h, structs.h, or protos.h, globals.h. This greatly reduces dependencies between the various source files. - globals.c is generated from globals.h by a Perl script. - Started customizable error texts. Changes to squid-1.2.alpha4 (): - New MIME configuration, regular expression based - Added request_timeout config option - Multiple HTTP sockets (Lincoln Dale). - Moved 'fds_are_n_free' check to httpAccept(). - s/USE_POLL/HAVE_POLL/; make poll() default if available. - Changed storeRegister to use offsets and make immediate callbacks if appropriate. - Removed icpDetectClientClose(). Some of that functionality goes into clientReadRequest() and the rest into httpRequestFree(). - Moved IP lookups to commConnect stuff. - Added support for retrying connect(). - New inline debug() macro (David Luyer). - Replace frequent gettimeofday() calls with alarm(3) based clock. Need to add more gettimeofday() calls to get back high-resolution timestamp logging (Andres Kroonmaa). - Added support for Cache-control: proxy-revalidate; based on squid-1.1 patch from Mike Mitchell. Changes to squid-1.2.alpha3 (): - Implemented persistent connections between clients and squid. - Moved various FD tables (comm.c, fdstat.c, disk.c) to a single table in fd.c. - Removed use of FD as an identifier in certain callback operations (ipcache, fqdncache). - General code cleanup. - Fixed typedefs for callback functions. - Removed FD lifetime/timeout dichotomy. Now we only have timeouts, however the lifetime concept/keyword may still linger in certain places. - Change Makefile 'realclean' target to 'distclean' - Changed config file parsing of time specifications to use parseTimeLine(). - Removed storetoString.c Changes to squid-1.2.alpha2 (): - Merged squid-1.1.9, squid-1.1.10 changes Changes to squid-1.2.alpha1 (): - Unified peer selection algorithm. - aiops.c and aiops.h are a threaded implementation of asynchronous file operations (Stewart Forster). - async_io.c and async_io.h are complete rewrites of the old versions (Stewart Forster). - Rewrote all disk file operations of squid to support the idea of callbacks except where not required (Stewart Forster). - Background validation of 'tainted' swap log entries (Stewart Forster). - Modified storeWriteCleanLog to create the log file using the open/write rather than fopen/printf (Stewart Forster). - Added the EINTR error response to handle badly interrupted system calls (Stewart Forster). - UDP_HIT_OBJ not supported, removed. - Different sized 'cache_dirs' supported. ==============================================================================