#.rst: # GNUInstallDirs # -------------- # # Define GNU standard installation directories # # Provides install directory variables as defined for GNU software: # # :: # # http://www.gnu.org/prep/standards/html_node/Directory-Variables.html # # Inclusion of this module defines the following variables: # # :: # # CMAKE_INSTALL_ - destination for files of a given type # CMAKE_INSTALL_FULL_ - corresponding absolute path # # where is one of: # # :: # # BINDIR - user executables (bin) # SBINDIR - system admin executables (sbin) # LIBEXECDIR - program executables (libexec) # SYSCONFDIR - read-only single-machine data (etc) # SHAREDSTATEDIR - modifiable architecture-independent data (com) # LOCALSTATEDIR - modifiable single-machine data (var) # LIBDIR - object code libraries (lib or lib64 or lib/ on Debian) # INCLUDEDIR - C header files (include) # OLDINCLUDEDIR - C header files for non-gcc (/usr/include) # DATAROOTDIR - read-only architecture-independent data root (share) # DATADIR - read-only architecture-independent data (DATAROOTDIR) # INFODIR - info documentation (DATAROOTDIR/info) # LOCALEDIR - locale-dependent data (DATAROOTDIR/locale) # MANDIR - man documentation (DATAROOTDIR/man) # DOCDIR - documentation root (DATAROOTDIR/doc/PROJECT_NAME) # # Each CMAKE_INSTALL_ value may be passed to the DESTINATION # options of install() commands for the corresponding file type. If the # includer does not define a value the above-shown default will be used # and the value will appear in the cache for editing by the user. Each # CMAKE_INSTALL_FULL_ value contains an absolute path constructed # from the corresponding destination by prepending (if necessary) the # value of CMAKE_INSTALL_PREFIX. #============================================================================= # Copyright 2011 Nikita Krupen'ko # Copyright 2011 Kitware, Inc. # # Distributed under the OSI-approved BSD License (the "License"); # see accompanying file Copyright.txt for details. # # This software is distributed WITHOUT ANY WARRANTY; without even the # implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # See the License for more information. #============================================================================= # (To distribute this file outside of CMake, substitute the full # License text for the above reference.) # Installation directories # if(NOT DEFINED CMAKE_INSTALL_BINDIR) set(CMAKE_INSTALL_BINDIR "bin" CACHE PATH "user executables (bin)") endif() if(NOT DEFINED CMAKE_INSTALL_SBINDIR) set(CMAKE_INSTALL_SBINDIR "sbin" CACHE PATH "system admin executables (sbin)") endif() if(NOT DEFINED CMAKE_INSTALL_LIBEXECDIR) set(CMAKE_INSTALL_LIBEXECDIR "libexec" CACHE PATH "program executables (libexec)") endif() if(NOT DEFINED CMAKE_INSTALL_SYSCONFDIR) set(CMAKE_INSTALL_SYSCONFDIR "etc" CACHE PATH "read-only single-machine data (etc)") endif() if(NOT DEFINED CMAKE_INSTALL_SHAREDSTATEDIR) set(CMAKE_INSTALL_SHAREDSTATEDIR "com" CACHE PATH "modifiable architecture-independent data (com)") endif() if(NOT DEFINED CMAKE_INSTALL_LOCALSTATEDIR) set(CMAKE_INSTALL_LOCALSTATEDIR "var" CACHE PATH "modifiable single-machine data (var)") endif() # We check if the variable was manually set and not cached, in order to # allow projects to set the values as normal variables before including # GNUInstallDirs to avoid having the entries cached or user-editable. It # replaces the "if(NOT DEFINED CMAKE_INSTALL_XXX)" checks in all the # other cases. # If CMAKE_INSTALL_LIBDIR is defined, if _libdir_set is false, then the # variable is a normal one, otherwise it is a cache one. get_property(_libdir_set CACHE CMAKE_INSTALL_LIBDIR PROPERTY TYPE SET) if(NOT DEFINED CMAKE_INSTALL_LIBDIR OR (_libdir_set AND DEFINED _GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX AND NOT "${_GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX}" STREQUAL "${CMAKE_INSTALL_PREFIX}")) # If CMAKE_INSTALL_LIBDIR is not defined, it is always executed. # Otherwise: # * if _libdir_set is false it is not executed (meaning that it is # not a cache variable) # * if _GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX is not defined it is # not executed # * if _GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX and # CMAKE_INSTALL_PREFIX are the same string it is not executed. # _GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX is updated after the # execution, of this part of code, therefore at the next inclusion # of the file, CMAKE_INSTALL_LIBDIR is defined, and the 2 strings # are equal, meaning that the if is not executed the code the # second time. set(_LIBDIR_DEFAULT "lib") # Override this default 'lib' with 'lib64' iff: # - we are on Linux system but NOT cross-compiling # - we are NOT on debian # - we are on a 64 bits system # reason is: amd64 ABI: http://www.x86-64.org/documentation/abi.pdf # For Debian with multiarch, use 'lib/${CMAKE_LIBRARY_ARCHITECTURE}' if # CMAKE_LIBRARY_ARCHITECTURE is set (which contains e.g. "i386-linux-gnu" # and CMAKE_INSTALL_PREFIX is "/usr" # See http://wiki.debian.org/Multiarch if(DEFINED _GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX) set(__LAST_LIBDIR_DEFAULT "lib") # __LAST_LIBDIR_DEFAULT is the default value that we compute from # _GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX, not a cache entry for # the value that was last used as the default. # This value is used to figure out whether the user changed the # CMAKE_INSTALL_LIBDIR value manually, or if the value was the # default one. When CMAKE_INSTALL_PREFIX changes, the value is # updated to the new default, unless the user explicitly changed it. endif() if(CMAKE_SYSTEM_NAME MATCHES "^(Linux|kFreeBSD|GNU)$" AND NOT CMAKE_CROSSCOMPILING) if (EXISTS "/etc/debian_version") # is this a debian system ? if(CMAKE_LIBRARY_ARCHITECTURE) set(_LIBDIR_DEFAULT "lib/${CMAKE_LIBRARY_ARCHITECTURE}") endif() else() # not debian, rely on CMAKE_SIZEOF_VOID_P: if(NOT DEFINED CMAKE_SIZEOF_VOID_P) message(AUTHOR_WARNING "Unable to determine default CMAKE_INSTALL_LIBDIR directory because no target architecture is known. " "Please enable at least one language before including GNUInstallDirs.") else() if("${CMAKE_SIZEOF_VOID_P}" EQUAL "8") set(_LIBDIR_DEFAULT "lib64") if(DEFINED _GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX) set(__LAST_LIBDIR_DEFAULT "lib64") endif() endif() endif() endif() endif() if(NOT DEFINED CMAKE_INSTALL_LIBDIR) set(CMAKE_INSTALL_LIBDIR "${_LIBDIR_DEFAULT}" CACHE PATH "object code libraries (${_LIBDIR_DEFAULT})") elseif(DEFINED __LAST_LIBDIR_DEFAULT AND "${__LAST_LIBDIR_DEFAULT}" STREQUAL "${CMAKE_INSTALL_LIBDIR}") set_property(CACHE CMAKE_INSTALL_LIBDIR PROPERTY VALUE "${_LIBDIR_DEFAULT}") endif() endif() # Save for next run set(_GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX "${CMAKE_INSTALL_PREFIX}" CACHE INTERNAL "CMAKE_INSTALL_PREFIX during last run") unset(_libdir_set) unset(__LAST_LIBDIR_DEFAULT) if(NOT DEFINED CMAKE_INSTALL_INCLUDEDIR) set(CMAKE_INSTALL_INCLUDEDIR "include" CACHE PATH "C header files (include)") endif() if(NOT DEFINED CMAKE_INSTALL_OLDINCLUDEDIR) set(CMAKE_INSTALL_OLDINCLUDEDIR "/usr/include" CACHE PATH "C header files for non-gcc (/usr/include)") endif() if(NOT DEFINED CMAKE_INSTALL_DATAROOTDIR) set(CMAKE_INSTALL_DATAROOTDIR "share" CACHE PATH "read-only architecture-independent data root (share)") endif() #----------------------------------------------------------------------------- # Values whose defaults are relative to DATAROOTDIR. Store empty values in # the cache and store the defaults in local variables if the cache values are # not set explicitly. This auto-updates the defaults as DATAROOTDIR changes. if(NOT CMAKE_INSTALL_DATADIR) set(CMAKE_INSTALL_DATADIR "" CACHE PATH "read-only architecture-independent data (DATAROOTDIR)") set(CMAKE_INSTALL_DATADIR "${CMAKE_INSTALL_DATAROOTDIR}") endif() if(NOT CMAKE_INSTALL_INFODIR) set(CMAKE_INSTALL_INFODIR "" CACHE PATH "info documentation (DATAROOTDIR/info)") set(CMAKE_INSTALL_INFODIR "${CMAKE_INSTALL_DATAROOTDIR}/info") endif() if(NOT CMAKE_INSTALL_LOCALEDIR) set(CMAKE_INSTALL_LOCALEDIR "" CACHE PATH "locale-dependent data (DATAROOTDIR/locale)") set(CMAKE_INSTALL_LOCALEDIR "${CMAKE_INSTALL_DATAROOTDIR}/locale") endif() if(NOT CMAKE_INSTALL_MANDIR) set(CMAKE_INSTALL_MANDIR "" CACHE PATH "man documentation (DATAROOTDIR/man)") set(CMAKE_INSTALL_MANDIR "${CMAKE_INSTALL_DATAROOTDIR}/man") endif() if(NOT CMAKE_INSTALL_DOCDIR) set(CMAKE_INSTALL_DOCDIR "" CACHE PATH "documentation root (DATAROOTDIR/doc/PROJECT_NAME)") set(CMAKE_INSTALL_DOCDIR "${CMAKE_INSTALL_DATAROOTDIR}/doc/${PROJECT_NAME}") endif() #----------------------------------------------------------------------------- mark_as_advanced( CMAKE_INSTALL_BINDIR CMAKE_INSTALL_SBINDIR CMAKE_INSTALL_LIBEXECDIR CMAKE_INSTALL_SYSCONFDIR CMAKE_INSTALL_SHAREDSTATEDIR CMAKE_INSTALL_LOCALSTATEDIR CMAKE_INSTALL_LIBDIR CMAKE_INSTALL_INCLUDEDIR CMAKE_INSTALL_OLDINCLUDEDIR CMAKE_INSTALL_DATAROOTDIR CMAKE_INSTALL_DATADIR CMAKE_INSTALL_INFODIR CMAKE_INSTALL_LOCALEDIR CMAKE_INSTALL_MANDIR CMAKE_INSTALL_DOCDIR ) # Result directories # foreach(dir BINDIR SBINDIR LIBEXECDIR SYSCONFDIR SHAREDSTATEDIR LOCALSTATEDIR LIBDIR INCLUDEDIR OLDINCLUDEDIR DATAROOTDIR DATADIR INFODIR LOCALEDIR MANDIR DOCDIR ) if(NOT IS_ABSOLUTE ${CMAKE_INSTALL_${dir}}) set(CMAKE_INSTALL_FULL_${dir} "${CMAKE_INSTALL_PREFIX}/${CMAKE_INSTALL_${dir}}") else() set(CMAKE_INSTALL_FULL_${dir} "${CMAKE_INSTALL_${dir}}") endif() endforeach()