/*- * See the file LICENSE for redistribution information. * * Copyright (c) 1996, 2010 Oracle and/or its affiliates. All rights reserved. * * $Id$ */ #ifndef _DB_LOCK_H_ #define _DB_LOCK_H_ #if defined(__cplusplus) extern "C" { #endif #define DB_LOCK_DEFAULT_N 1000 /* Default # of locks in region. */ /* * The locker id space is divided between the transaction manager and the lock * manager. Lock IDs start at 1 and go to DB_LOCK_MAXID. Txn IDs start at * DB_LOCK_MAXID + 1 and go up to TXN_MAXIMUM. */ #define DB_LOCK_INVALIDID 0 #define DB_LOCK_MAXID 0x7fffffff /* * A locker's deadlock resolution priority is stored as a 32 bit unsigned * integer. The maximum priority is DB_LOCK_MAXPRIORITY and the default * priorit is DB_LOCK_DEFPRIORITY. */ #define DB_LOCK_DEFPRIORITY 100 #define DB_LOCK_MAXPRIORITY UINT32_MAX /* * Out of band value for a lock. Locks contain an offset into a lock region, * so we use an invalid region offset to indicate an invalid or unset lock. */ #define LOCK_INVALID INVALID_ROFF #define LOCK_ISSET(lock) ((lock).off != LOCK_INVALID) #define LOCK_INIT(lock) ((lock).off = LOCK_INVALID) /* * Macro to identify a write lock for the purpose of counting locks * for the NUMWRITES option to deadlock detection. */ #define IS_WRITELOCK(m) \ ((m) == DB_LOCK_WRITE || (m) == DB_LOCK_WWRITE || \ (m) == DB_LOCK_IWRITE || (m) == DB_LOCK_IWR) /* * Macros to lock/unlock the lock region as a whole. Mostly used for * initialization. */ #define LOCK_REGION_LOCK(env) \ MUTEX_LOCK(env, ((DB_LOCKREGION *) \ (env)->lk_handle->reginfo.primary)->mtx_region) #define LOCK_REGION_UNLOCK(env) \ MUTEX_UNLOCK(env, ((DB_LOCKREGION *) \ (env)->lk_handle->reginfo.primary)->mtx_region) /* * DB_LOCKREGION -- * The lock shared region. */ typedef struct __db_lockregion { db_mutex_t mtx_region; /* Region mutex. */ u_int32_t need_dd; /* flag for deadlock detector */ u_int32_t detect; /* run dd on every conflict */ db_timespec next_timeout; /* next time to expire a lock */ db_mutex_t mtx_dd; /* mutex for lock object dd list. */ db_mutex_t mtx_lockers; /* mutex for locker allocation. */ SH_TAILQ_HEAD(__dobj) dd_objs; /* objects with waiters */ /* free locker header */ roff_t locker_mem_off; /* block memory for lockers */ SH_TAILQ_HEAD(__flocker) free_lockers; SH_TAILQ_HEAD(__lkrs) lockers; /* list of lockers */ db_timeout_t lk_timeout; /* timeout for locks. */ db_timeout_t tx_timeout; /* timeout for txns. */ u_int32_t locker_t_size; /* size of locker hash table */ u_int32_t object_t_size; /* size of object hash table */ u_int32_t part_t_size; /* number of partitions */ roff_t conf_off; /* offset of conflicts array */ roff_t obj_off; /* offset of object hash table */ roff_t part_off; /* offset of partition array */ roff_t stat_off; /* offset to object hash stats */ roff_t locker_off; /* offset of locker hash table */ u_int32_t lock_id; /* Current lock(er) id to allocate. */ u_int32_t cur_maxid; /* Current max lock(er) id. */ u_int32_t nlockers; /* Current number of lockers. */ int nmodes; /* Number of modes in conflict table. */ DB_LOCK_STAT stat; /* stats about locking. */ } DB_LOCKREGION; /* * Since we will store DBTs in shared memory, we need the equivalent of a * DBT that will work in shared memory. */ typedef struct __sh_dbt { u_int32_t size; /* Byte length. */ roff_t off; /* Region offset. */ } SH_DBT; #define SH_DBT_PTR(p) ((void *)(((u_int8_t *)(p)) + (p)->off)) /* * Object structures; these live in the object hash table. */ typedef struct __db_lockobj { u_int32_t indx; /* Hash index of this object. */ u_int32_t generation; /* Generation of this object. */ SH_DBT lockobj; /* Identifies object locked. */ SH_TAILQ_ENTRY links; /* Links for free list or hash list. */ SH_TAILQ_ENTRY dd_links; /* Links for dd list. */ SH_TAILQ_HEAD(__waitl) waiters; /* List of waiting locks. */ SH_TAILQ_HEAD(__holdl) holders; /* List of held locks. */ /* Declare room in the object to hold * typical DB lock structures so that * we do not have to allocate them from * shalloc at run-time. */ u_int8_t objdata[sizeof(struct __db_ilock)]; } DB_LOCKOBJ; /* * Locker structures; these live in the locker hash table. */ struct __db_locker { u_int32_t id; /* Locker id. */ pid_t pid; /* Process owning locker ID */ db_threadid_t tid; /* Thread owning locker ID */ db_mutex_t mtx_locker; /* Mutex to block on. */ u_int32_t dd_id; /* Deadlock detector id. */ u_int32_t nlocks; /* Number of locks held. */ u_int32_t nwrites; /* Number of write locks held. */ u_int32_t priority; /* Deadlock resolution priority. */ u_int32_t nrequest; /* number of requests. */ roff_t master_locker; /* Locker of master transaction. */ roff_t parent_locker; /* Parent of this child. */ SH_LIST_HEAD(_child) child_locker; /* List of descendant txns; only used in a "master" txn. */ SH_LIST_ENTRY child_link; /* Links transactions in the family; elements of the child_locker list. */ SH_TAILQ_ENTRY links; /* Links for free and hash list. */ SH_TAILQ_ENTRY ulinks; /* Links in-use list. */ SH_LIST_HEAD(_held) heldby; /* Locks held by this locker. */ db_timespec lk_expire; /* When current lock expires. */ db_timespec tx_expire; /* When this txn expires. */ db_timeout_t lk_timeout; /* How long do we let locks live. */ #define DB_LOCKER_DIRTY 0x0001 #define DB_LOCKER_INABORT 0x0002 #define DB_LOCKER_TIMEOUT 0x0004 #define DB_LOCKER_FAMILY_LOCKER 0x0008 u_int32_t flags; }; /* * Map a hash index into a partition. */ #define LOCK_PART(reg, ndx) (ndx % (reg)->part_t_size) /* * Structure that contains information about a lock table partition. */ typedef struct __db_lockpart{ db_mutex_t mtx_part; /* mutex for partition*/ /* free lock header */ SH_TAILQ_HEAD(__flock) free_locks; /* free obj header */ SH_TAILQ_HEAD(__fobj) free_objs; roff_t lock_mem_off; /* block memory for locks */ roff_t lockobj_mem_off;/* block memory for lockobjs */ #ifdef HAVE_STATISTICS DB_LOCK_PSTAT part_stat; /* Partition stats. */ #endif } DB_LOCKPART; #define FREE_LOCKS(lt, part) ((lt)->part_array[part].free_locks) #define FREE_OBJS(lt, part) ((lt)->part_array[part].free_objs) /* * DB_LOCKTAB -- * The primary library lock data structure (i.e., the one referenced * by the environment, as opposed to the internal one laid out in the region.) */ struct __db_locktab { ENV *env; /* Environment. */ REGINFO reginfo; /* Region information. */ u_int8_t *conflicts; /* Pointer to conflict matrix. */ DB_LOCKPART *part_array; /* Beginning of partition array. */ #ifdef HAVE_STATISTICS DB_LOCK_HSTAT *obj_stat; /* Object hash stats array. */ #endif DB_HASHTAB *obj_tab; /* Beginning of object hash table. */ DB_HASHTAB *locker_tab; /* Beginning of locker hash table. */ }; /* * Test for conflicts. * * Cast HELD and WANTED to ints, they are usually db_lockmode_t enums. */ #define CONFLICTS(T, R, HELD, WANTED) \ (T)->conflicts[((int)HELD) * (R)->nmodes + ((int)WANTED)] #define OBJ_LINKS_VALID(L) ((L)->links.stqe_prev != -1) struct __db_lock { /* * Wait on mutex to wait on lock. You reference your own mutex with * ID 0 and others reference your mutex with ID 1. */ db_mutex_t mtx_lock; roff_t holder; /* Who holds this lock. */ u_int32_t gen; /* Generation count. */ SH_TAILQ_ENTRY links; /* Free or holder/waiter list. */ SH_LIST_ENTRY locker_links; /* List of locks held by a locker. */ u_int32_t refcount; /* Reference count the lock. */ db_lockmode_t mode; /* What sort of lock. */ roff_t obj; /* Relative offset of object struct. */ u_int32_t indx; /* Hash index of this object. */ db_status_t status; /* Status of this lock. */ }; /* * Flag values for __lock_put_internal: * DB_LOCK_DOALL: Unlock all references in this lock (instead of only 1). * DB_LOCK_FREE: Free the lock (used in checklocker). * DB_LOCK_NOPROMOTE: Don't bother running promotion when releasing locks * (used by __lock_put_internal). * DB_LOCK_UNLINK: Remove from the locker links (used in checklocker). * Make sure that these do not conflict with the interface flags because * we pass some of those around. */ #define DB_LOCK_DOALL 0x010000 #define DB_LOCK_FREE 0x040000 #define DB_LOCK_NOPROMOTE 0x080000 #define DB_LOCK_UNLINK 0x100000 #define DB_LOCK_NOWAITERS 0x400000 /* * Macros to get/release different types of mutexes. */ /* * Operations on lock objects must be protected by a mutex, either on their * partition or on the lock region. Lock structures associated with that * object are protected as well. Each partition has a free list of objects * and lock structures protected by that mutex. We want to avoid getting * multiple mutexes, particularly in __lock_vec, when there is only a * single partition. If there is only one partition, then all the calls * to LOCK_SYSTEM_LOCK(UNLOCK) actually acquire(release) a lock system * wide mutex and MUTEX_LOCK(UNLOCK)_PARTITION are no-ops. If the number * of partitions is greater than one, then LOCK_SYSTEM_LOCK(UNLOCK) is a * no-op, and MUTEX_LOCK(UNLOCK)_PARTITION acquire a mutex on a particular * partition of the lock table. */ #define LOCK_SYSTEM_LOCK(lt, reg) do { \ if ((reg)->part_t_size == 1) \ MUTEX_LOCK((lt)->env, (reg)->mtx_region); \ } while (0) #define LOCK_SYSTEM_UNLOCK(lt, reg) do { \ if ((reg)->part_t_size == 1) \ MUTEX_UNLOCK((lt)->env, (reg)->mtx_region); \ } while (0) #define MUTEX_LOCK_PARTITION(lt, reg, p) do { \ if ((reg)->part_t_size != 1) \ MUTEX_LOCK((lt)->env, (lt)->part_array[p].mtx_part); \ } while (0) #define MUTEX_UNLOCK_PARTITION(lt, reg, p) do { \ if ((reg)->part_t_size != 1) \ MUTEX_UNLOCK((lt)->env, (lt)->part_array[p].mtx_part); \ } while (0) #define OBJECT_LOCK(lt, reg, obj, ndx) do { \ ndx = __lock_ohash(obj) % (reg)->object_t_size; \ MUTEX_LOCK_PARTITION(lt, reg, LOCK_PART(reg, ndx)); \ } while (0) #define OBJECT_LOCK_NDX(lt, reg, ndx) \ MUTEX_LOCK_PARTITION(lt, reg, LOCK_PART(reg, ndx)); #define OBJECT_UNLOCK(lt, reg, ndx) \ MUTEX_UNLOCK_PARTITION(lt, reg, LOCK_PART(reg, ndx)); /* * Protect the object deadlock detector queue and the locker allocation * and active queues */ #define LOCK_DD(env, region) \ MUTEX_LOCK(env, (region)->mtx_dd) #define UNLOCK_DD(env, region) \ MUTEX_UNLOCK(env, (region)->mtx_dd) #define LOCK_LOCKERS(env, region) \ MUTEX_LOCK(env, (region)->mtx_lockers) #define UNLOCK_LOCKERS(env, region) \ MUTEX_UNLOCK(env, (region)->mtx_lockers) /* * __lock_locker_hash -- * Hash function for entering lockers into the locker hash table. * Since these are simply 32-bit unsigned integers at the moment, * just return the locker value. */ #define __lock_locker_hash(locker) (locker) #define LOCKER_HASH(lt, reg, locker, ndx) \ ndx = __lock_locker_hash(locker) % (reg)->locker_t_size; #if defined(__cplusplus) } #endif #include "dbinc_auto/lock_ext.h" #endif /* !_DB_LOCK_H_ */