dnl Copyright (c) 2005, Eric Crahen
dnl
dnl Permission is hereby granted, free of charge, to any person obtaining a copy
dnl of this software and associated documentation files (the "Software"), to deal
dnl in the Software without restriction, including without limitation the rights
dnl to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
dnl copies of the Software, and to permit persons to whom the Software is furnished
dnl to do so, subject to the following conditions:
dnl 
dnl The above copyright notice and this permission notice shall be included in all
dnl copies or substantial portions of the Software.
dnl 
dnl THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
dnl IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
dnl FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
dnl AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
dnl WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
dnl CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

dnl Detect the library and include paths for ZThreads, perform some test
dnl compilations.
dnl
dnl Should be used in AC_PROG_CC mode before the swtich to C++ if any is made
dnl (eg before AC_LANG_CPLUSPLUS)
dnl
dnl --with-zthread-prefix : Skip detection, use this general path
dnl --with-zthread-exec-prefix : Skip detecting the zthread-config tool
dnl 
dnl Sets the following variables.
dnl
dnl ZTHREAD_CXXFLAGS
dnl ZTHREAD_LIBS
dnl 
AC_DEFUN([AM_PATH_ZTHREAD],
[


AC_ARG_WITH(zthread-prefix,[  --with-zthread-prefix=PFX   Prefix where ZTHREAD is installed (optional)],
            zthread_prefix="$withval", zthread_prefix="")
AC_ARG_WITH(zthread-exec-prefix,[  --with-zthread-exec-prefix=PFX Exec prefix where ZTHREAD is installed (optional)],
            zthread_exec_prefix="$withval", zthread_exec_prefix="")
AC_ARG_ENABLE(zthreadtest, [  --disable-zthreadtest       Do not try to compile and run a test ZTHREAD program],
		    , enable_zthreadtest=yes)

  if test x$zthread_exec_prefix != x ; then
     zthread_args="$zthread_args --exec-prefix=$zthread_exec_prefix"
     if test x${ZTHREAD_CONFIG+set} != xset ; then
        ZTHREAD_CONFIG=$zthread_exec_prefix/bin/zthread-config
     fi
  fi
  if test x$zthread_prefix != x ; then
     zthread_args="$zthread_args --prefix=$zthread_prefix"
     if test x${ZTHREAD_CONFIG+set} != xset ; then
        ZTHREAD_CONFIG=$zthread_prefix/bin/zthread-config
     fi
  fi

  AC_PATH_PROG(ZTHREAD_CONFIG, zthread-config, no)
  min_zthread_version=ifelse([$1], ,0.11.0,$1)
  AC_MSG_CHECKING(for ZTHREAD - version >= $min_zthread_version)
  no_zthread=""
  if test "$ZTHREAD_CONFIG" = "no" ; then
    no_zthread=yes
  else
    ZTHREAD_CXXFLAGS=`$ZTHREAD_CONFIG $zthreadconf_args --cflags`
    ZTHREAD_LIBS=`$ZTHREAD_CONFIG $zthreadconf_args --libs`

    zthread_major_version=`$ZTHREAD_CONFIG $zthread_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
    zthread_minor_version=`$ZTHREAD_CONFIG $zthread_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
    zthread_micro_version=`$ZTHREAD_CONFIG $zthread_config_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
    if test "x$enable_zthreadtest" = "xyes" ; then
      ac_save_CXXFLAGS="$CXXFLAGS"
      ac_save_LIBS="$LIBS"
      CXXFLAGS="$CXXFLAGS $ZTHREAD_CXXFLAGS"
      LIBS="$LIBS $ZTHREAD_LIBS"

dnl
dnl Now check if the installed ZTHREAD is sufficiently new. (Also sanity
dnl checks the results of zthread-config to some extent
dnl
      rm -f conf.zthreadtest
      AC_TRY_RUN([


#include <stdio.h>
#include <string.h>
#include <unistd.h>
#include "ZThread.h"

int main (int argc, char *argv[]) {

  int major, minor, micro;
  char tmp_version[256];

  { FILE *fp = fopen("conf.zthreadtest", "a"); if ( fp ) fclose(fp); }


  /* HP/UX 9 (%@#!) writes to sscanf strings */
  strcpy(tmp_version, "$min_zthread_version");
  
  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {

    printf("%s, bad version string\n", "$min_zthread_version");
    return 1;

  }

  if (($zthread_major_version > major) ||
     (($zthread_major_version == major) && ($zthread_minor_version > minor)) ||
     (($zthread_major_version == major) && ($zthread_minor_version == minor) && 
     ($zthread_micro_version >= micro))) {
      return 0;
  } else {

    printf("\n*** 'zthread-config --version' returned %d.%d.%d, but the minimum version\n", $zthread_major_version, $zthread_minor_version, $zthread_micro_version);
    printf("*** of ZThread required is %d.%d.%d. If zthread-config is correct, then it is\n", major, minor, micro);
    printf("*** best to upgrade to the required version.\n");
    printf("*** If zthread-config was wrong, set the environment variable ZTHREAD_CONFIG\n");
    printf("*** to point to the correct copy of zthread-config, and remove the file\n");
    printf("*** config.cache before re-running configure\n");

    return 1;
  }

}

],, no_zthread=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
       
    CXXFLAGS="$ac_save_CXXFLAGS"
    LIBS="$ac_save_LIBS"
    fi
  fi

  if test "x$no_zthread" = x ; then

     AC_MSG_RESULT(yes)
     ifelse([$2], , :, [$2])     

  else

     AC_MSG_RESULT(no)

     if test "$ZTHREAD_CONFIG" = "no" ; then

       echo "*** The zthread-config script installed by ZThread could not be found"
       echo "*** If ZThread was installed in PREFIX, make sure PREFIX/bin is in"
       echo "*** your path, or set the ZTHREAD_CONFIG environment variable to the"
       echo "*** full path to zthread-config."

     else
       if test -f conf.zthreadtest ; then
        :
       else

          echo "*** Could not run ZThread test program, checking why..."
          CXXFLAGS="$CXXFLAGS $ZTHREAD_CXXFLAGS"
          LIBS="$LIBS $ZTHREAD_LIBS"

          echo $LIBS;

          AC_TRY_LINK([#include "ZThread.h"], 
                      [ return 0; ], [
          echo "*** The test program compiled, but did not run. This usually means"
          echo "*** that the run-time linker is not finding ZThread or finding the wrong"
          echo "*** version of ZThread. If it is not finding ZThread, you'll need to set your"
          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
          echo "*** is required on your system"
	        echo "***"
          echo "*** If you have an old version installed, it is best to remove it, although"
          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
        [ echo "*** The test program failed to compile or link. See the file config.log for the"
          echo "*** exact error that occured. This usually means ZThread was incorrectly installed"
          echo "*** or that you have moved ZThread since it was installed. In the latter case, you"
          echo "*** may want to edit the zthread-config script: $ZTHREAD_CONFIG" ])
          CXXFLAGS="$ac_save_CXXFLAGS"
          LIBS="$ac_save_LIBS"
       fi
     fi

     ZTHREAD_CXXFLAGS=""
     ZTHREAD_LIBS=""
     ifelse([$3], , :, [$3])

  fi

  AC_SUBST(ZTHREAD_CXXFLAGS)
  AC_SUBST(ZTHREAD_LIBS)

  rm -f conf.zthreadtest

])