Revision history for Ocsinventory::Agent 2.0 * Fix Bug #778692 about using authentication when sending messages in Download.pm * Patch from Yoann Le Bihan for Solaris zones support * Fix Bug #586321 about wrong version comparison in Vmsystem.pm * Fix Bug #772436 about download end message report in Download.pm * Display support log received from PROLOG * Various patches for Snmp/9.pm module (Cisco) * Add --nolocal option to desactivate local mode even if it is set in config file or command line * Fix Bug #767290 about /etc/sysconfig/ocsinventory-agent server settings ignore (only for Redhat like distributions) * Only inventory vitualmachines which have an UUID in VirtualBox.pm to prevent inventoring USB devices or shared folders as virtualmachines 2.0 rc4 * Complety clean the disastrous treatments of accountinfos while receiving it from server,storing it in file and adding it in inventory * Fix UTF8 problems due to XML::Simple::XMLIn() 2.0 rc3 * Fix Bug #720635 about lspci usage on old Linux distributions * Fix Bug #720626 about Gentoo packages with hyphen in their names * Fix a bug with the use of pacman tool on ArchLinux. We now launch the real packages manager instead of the famous game ;) ;) * Avoid perl errors when no answer from OCS server * Enhance logging in Snmp.pm and Download.pm when disabling this modules (local mode or prerequisites not OK) * Patches from Bernhard Denner to enhance CPU and memry detection on old SUN solaris workstations * Patch from Bernhard Denner to enhance dhcp-leases files detection on Linux systems 2.0 rc2 * Add a new cleanXml() subroutine in Common.pm to clean non printable characters in both standard inventory and SNMP inventory * Various patches for Snmp/9.pm module (Cisco) * Add a new addSnmpCPU() subroutine in Common.pm * Disabling Download.pm if agent running in local mode 2.0 rc1 * Add download_start_handler to check if Net::SSLeay can be load and disable Download.pm if not * Add Net::SNMP optionnal dependency in README file. * Delete Win32 from backend * Various patches for 9.pm and If_Mib.pm to enhance ethernet ports speed display (François Mermet) * New SNMP modules for Juniper, Futjitsu and F5 vendors (François Mermet) * Fix Bug #682689 about missing data for disk when can't run lshal command (Bernhard Denner) * Add a warning message about user privacy in man page for --scan-homedirs option * Various patches for 8072.pm an If_Mib.pm (François Mermet) * Change timeout for Backend modules from 180 to 600 seconds * Change timeout for Backend modules from 180 to 600 seconds * Back on the ipdiscover binary from the old OCS Linux Agent to make network scans lighter than Nmap. Ipdiscover binary is only available under Linux systems * Use LaunchDaemons instead of LaunchAgents in MacOSX package * Fix SSL errors if no URL is given by the server in Snmp.pm * Do SNMP scans and treatments only if asked by the server * Delete some useless logs in debug for SNMP constructors and standard MIBs modules * Change oid_value in snmp_info subroutine in Printer_Mib.pm * New SNMP 2620.pm module for Checkpoint Software Technologies constructor (François Mermet) * Add new "DEVICEPORT" and "DEVICETYPE" fields in addSnmpnetwork() in Common.pm * 311.pm and 8072.pm use setSnmpComputer() to set the type of SNMP device * Add a new addSnmpInput() subroutine in Common.pm * Fix a bug in addSnmpSwitch subroutine in Common.pm * Replace SetSnmpSwitch() subroutine by SetSnmpSwitchInfos() in Common.pm * Set right fields for AddSnmpSwitch() subroutine in Common.pm * Fix various bug on snmp_oid_run subroutine for constructors and standard MIB modules * Fix various mistakes and missing fields in snmp subroutines in Common.pm * Fix a warning due to deprecated syntax in 3ware.pm * Fix a warning due to deprecated syntax in 3ware.pm * Fix a catastrophic performance issue by preventing to run sysctl at every line of demidecode output to get CPU informations on BSD systems * Snmp.pm now download snmp_com.txt file to get informations about SNMP communities for scans using HTTPS * New subroutines called "getHttpFile" and "getHttpsFile" in Network.pm to download files easily using HTTP or HTTPS. * Fix bugs and minor mistakes in Common.pm and If_Mib.pm * Add Lenovo EDID for monitors (Adam Buchbinder) * Disabling Snmp.pm if agent running in local mode * Fix a warning if network interface is down in Ipdiscover.pm * Enhance inventory initialization for a better modularity * Local mode can now use the "inventory_handler" hook * Various patches for SNMP constructors or standard MIB module (François Mermet) * Prevent a bug in using Default.pm (François Mermet) * Add "ACR" and "EPI" EDID ID for monitors (Adam Buchbinder) * Fix Bug #597752 about TYPE and VOLUMN fiels reversal for BSD systems. * Fix Bug #612515 to report network interface that don't have an IP adress (Mick K) * Don't take care of host with no MAC adress in Nmap.pm * Add the SOFTWARE field in addSnmpCard subroutine * Enhance Printer_Mib.pm to add information about printer status and printer error state * Snmp.pm now use Default.pm to launch standard MIB modules by default (François Mermet) * Upgrade several SNMP contructors/standard MIB modules * Add a new SNMP constructor module for Lexmark * Add a new SNMP module for the standard Entity MIB. * Add a new SNMP module to load standard MIB modules by default * Add new subroutines for SNMP XML feeding for informations about switches, network cards, blades, firewalls etc.... * Correct a log mistacke in Printer_Mib.pm * New 11.pm module to enable SNMP scans on HP devices * Get the SNMP device MACADDR from PROLOG resp to generate the SNMPDEVICEID in Snmp.pm * Add new subroutines in Common.pm for special SNMP XML feed or SNMP special treatments * New Printer_Mib.pm module to get SNMP printers informations 2.0 alpha Tue, 27 Jul 2010 22:27:27 +0100 * Snmp.pm use flushXMLTags() from Common.pm to flush the content of $common->{xmltags} * Modifying the inventory backend to use functions from Common.pm instead of Inventory.pm * New Snmp.pm for SNMP scans integration. It comes with its constructors modules to enhance scans results (a lot of beers to François Mermet to thank himfor his help) * Modifying postinst.pl to include Ocsinventory::Agent::Modules::Snmp * Agent.pm : add $logger object in Ocsinventory::Agent::Common instanciation * Common.pm : adding the can_run(), can_load(), can_read() and runcmdi() generic methods. Adding the use of the $logger object * Common.pm : add a new field 'TYPE' in setSnmpCommons() * Agent.pm now uses the new Networks.pm methods and add the $network object in the $context hash * Networks.pm now gives generic methods to send a XML to OCS server and receive a XML from OCS server * New addInput() method in Common.pm to add mouses and keyboards in inventory * Donwload.pm now use 'get_path' and 'already_in_array' functions from the new Common.pm * Common.pm : Replace the former Common.pm by a new one. Common.pm now give a lot of methods for other agent modules * Agent.pm : instanciate Ocsinventory::Agent::Common object and add a reference to it in $context * Use of the Nmap::Parser perl module to correct the very buggy Nmap implementation for Ipdiscover * Various patches for Solaris support (Lucas MASSE) * Fix the network speed data oblivion in Inventory.pm. The network speed can now be added in Network.pm of the several OS backends * Put the prolog_reader hook run at the right place to avoid an error if the agent failed to reach the server * Enhance dom0 support for Xen support (Guillaume ROUSSE) * Add bios informations for Xen PV hosts (Guillaume ROUSSE) * Fix Bug #552727 about getting processes taht are running in Solaris (Emengao) * Add the availiability to disable a module using start_handler hook * Debug and code cleaning in Download.pm * Fix Bug #552097 * Add XML::SAX::Expat module include * Replace {REQUEST} and {ADM} by {xmlroot} in xml handling for a better and better readability * Remove text about Win32 port in the README file * Correct a bug in Hooks.pm to pass inventory or prolog to modules * Add headers for the modules logs * Correct a bug in postinst.pl when removing the old Linux agent * Ocsinventory::Agent::Option:: namespace is now Ocsinventory::Agent::Modules:: * Modules now use Perl's object system * Hooks are now methods and not simple subroutines * Hook.pm is now Hooks.pm * Use of a new context hash in Agent.pm * CompatibilityLayer.pm is now Hook.pm * Calling hooks only in Agent.pm * Update HPUX support (Francois Mermet) * Verify ID value received by server in Download.pm * Verify the network syntax in Nmap.pm * Replace an hard coded pattern in Linux/devices.pm * Removing non posix cp option in Download.pm * Upgrade to memconf V2.13 * Add an in contrib example of script to identify specific software (Simon CLARA) * An example of script to use tarball to identify installed software * HP-UX: initial support, tested on RP3440 * Solaris/Network: support Zone * Solaris: use regex to identify CPU class * Improve the README about non-interactive installation * MacOSX: Correctly identify the CPU frequency on MacOSX 1.6 French 1.1.2.1 Tue, 12 Oct 2010 19:42:41 +0100 * Fix a secutiry bug due to the use of ExtUtils::Installed in Backend.pm. See http://bugs.debian.org/590879 and http://www.debian.org/security/2009/dsa-1828 for more informations. Thanks to Remi Collet for his report. 1.1.2 Sun, 27 Dec 2009 17:24:43 +0100 * Avoid problem with dmidecode -V output on RHEL3.9 (Remi COLLET) * Fix internal --delaytime handling. That's seconds, not hours! * Download.pm: improve a error message 1.1.1 Mon, 21 Dec 2009 22:38:12 +0100 * NETWORKS/VIRTUALDEV should be 1 or 0 * FreeBSD: Fix CPU detection (David DURIEUX) * Virtualization::Qemu, fix kvm detection * Don't run brctl if it's not installed * Various wording fixes (Vincent KNECHT) * Improve README (Barius DRUBECK) * Get serial number from ext4 partition if ext4dev driver is used * LP: #494908 Agent fails to retrieve info file when a package is activated only with the server name (Pascal DANEK) * LP: #495398 Fix RedHat version detection (Stéphane URBANOVSKI) * LP: #490774 Fix PowerPC CPU detection on Linux, thanks darkpep for the bug report 1.1 Fri, 06 Nov 2009 16:07:08 +0100 * addMemorie() renamed to addMemories(), this had been broken during the addMemories() → addMemory() transition * Debug mode: msg "check function failed" changed to "ignored" since the fails may be wanted by the check() function * CompatibilityLayer: $self->{params} changed to $self->{config}, this restore the debug mode in Download.pm * Continue XML::Inventory functions name clean up. Rename: - addSlots() calls to addSlot() - addMemories() calls to addMemory() * Move ocsinventory-agent POD documentation frol Ocsinventory::Agent to the ocsinventory-agent shell script. So now the manpage has the correct name * Fix RPM output parsing (Remi COLLET) * VMWareESX: avoid breakage is VM has spaces in its name (Christian Michallek) * Try to detect kvm --uuid value * Makefile.PL, check for Net::SSLeay * Move Ocsinventory::Agent in a .pm and add a wrapper script to load in order to by able to process --devlib * Parallels.pm: doesn't use sudo anymore and check for --scan-homedirs * Prune 'Mac OS X' from the version on Mac + typo fixes (Scott HANNAHS) * POD doc, add a paragraph about the config file * LP: #462529, Fix EDID screen detection, thanks Sergio MERINO * Use boolean for networks/virtualdev * Generic/Screen: chomp uuencode output * Generic/Screen: HSD code for "Hanns.G" (Remi COLLET) * postinst.pl, put user $PATH in /etc/cron.d/ocsinventory-agent 1.1_beta1 Fri, 18 Sep 2009 11:54:12 +0200 * Can use Net::CUPS to find the default printer * AIX: Hide procfs in Filesystem * OS::Linux::Storages, correctly retrieve the serial (Vladimir ELISSEEV) * load $http_proxy env settings and --proxy option is available * Add OS::Linux::Distro::NonLSB::ArchLinux (Julien SAFAR) * New Backend OS::Generic::Processes * Linux/BSD: detect DNS servers config * Solaris: Better output for $OSVErsion (Vladimir ELISSEEV) * Solaris: Sun Fire T1000 patches for memory (Vladimir ELISSEEV) * Solaris: memory SPARC Enterprise T5220 (Vladimir ELISSEEV) * Solaris: CPU SPARC Enterprise T5220 (Vladimir ELISSEEV) * Solaris: CPU SPARC Enterprise T5220 (Vladimir ELISSEEV) * Linux: split the /proc/cpuinfo parsing depending on the arch * Linux: drop Linux::Controllers which is duplicated with Generic::Lspci::Controllers (Vladimir ELISSEEV) * AIX: Various fixes in Memory.pm (Sebastien DAGNICOURT) * AIX: Storages.pm, Virtual disks support and fixes (Sebastien DAGNICOURT) * Backend.pm: Bump the default timeout from 30 to 180 secondes * Agent/XML/Inventory: Fix when version == 0, bug found by neisen * AIX: device type adjustment (Sebastien DAGNICOURT) * Solaris: Sun-Fire-V440 support (Sebastien DAGNICOURT) * Add a missing space is the name banner in --debug mode * Agent/XML/Inventory.pm: Add FROM and INSTALLDATE fields in software list and LASTLOGGEDUSER DATELASTLOGGEDUSER in HARDWARE (Nicolas EISEN) * Initialize etcdir key even if there is no config file * CompatibilityLayer: correctly set $debug * CompatibilityLayer: better log messages * getOptionInfoByName return an array ref now * rename getOptionInfoByName to getOptionsInfoByName * --debug print the XML on STDERR * Rename the params key to config to avoid ambiguity with $params * set HARDWARE/DEFAULTGATEWAY (Nicolas EISEN) * RPM: collect the install date and the size (Nicolas EISEN) * Linux: Collect LASTLOGGEDUSER and DATELASTLOGGEDUSER (Nicolas EISEN) * DPKG: collect the Installed-Size (Nicolas EISEN) * Linux: Collect the ext{2,3,4} and xfs serial number * Linux: Collect the ext{2,3,4} creation date * Add a warning when no certificat is found * Turns off alarm once it's backend run is finish * Fix the IPMI module detection * Linux: Store the PCISLOT and the driver name * NETWORKDS, only store Networks with an address * Linux: detect virtual network device * Linux: Store CONTROLLERS/DRIVER and CONTROLLERS/PCISLOT * Linux: Collects xfs, ext{2,3,4} and vfat label * runs the backend module from main() it's possible to reuse the Backend object. * Linux: filter non standard MAC address returned by ifconfig like 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 mac * Linux: Fix the Uptime check() * Preliminary libvirt support * Partial rewrite of the Download.pm backend * Add a warning if the user is no root, thanks Nicolas EISEN and Sylvain LUCE * SPARC-Enterprise M4000 and M5000 support (Sylvain LUCE) * Libvirt: collect VCPU info (Philippe LIBAT) * Add Virtualization::Xen module (Philippe LIBAT) * Solaris: add a warning if memconf is not in $PATH * Switch the XML content from ISO-8859-1 to UTF-8, BTW we force LC_ALL=C... * Fix the history flood in Download.pm (Pascal DANEK) https://sourceforge.net/tracker/index.php?func=detail&aid=2806585&group_id=58373&atid=487492 * Stores PCIID in CONTROLLERS/PCIID * Storage the monitor EDID string in BASE64 and UUENCODE * Linux: Storages: reorganize the code base and use lshal * Linux: Drives, complete inforamtions with lshal (Nicolas EISEN) * Linux: fix the PowerPC CPU detection https://sourceforge.net/tracker/?func=detail&atid=487492&aid=2043221&group_id=58373 * Warns the user during the install process if one of the recommended module is not installed * Update out copy of memconf, thanks WeatherDave who notified the new revision and of course Tom Schmidt who do a great job * MacOSX: Avoid a scalar used has hash ref error, thanks Adadov * Save VIDEOS/MEMORY and VIDEOS/RESOLUTION * MacOSX: Correctilly detect Up/Down network interfaces (David OLIVIER) * AddNetwork() doesn't ignore network with no IP address (David OLIVIER) * add --backend-collect-timeout parameter (Nicolas EISEN) * MacOSX: convert the IP mask from hex (David OLIVIER) * MacOSX: add a workaround to avoid Mac::SysProfile failure on MacOSX 10.5.7 (David OLIVIER) * Add Virtualization::VirtualBox module (Nicolas EISEN) * Add Virtualization::Qemu module (Nicolas EISEN) * Add Virtualization::Vmsystem module (Nicolas EISEN) * Better smartctl detection (Nicolas EISEN) * optimization and vm users detection Virtualization::VirtualBox (Nicolas EISEN) * Add Virtualization::VmwareFusion module (Walid NOUH) * Don't use hdparm prior 9.2.2 anymore to avoid crap in kernel log, see http://forums.ocsinventory-ng.org/viewtopic.php?pid=20768 * Correctly detect ipmitool * Solaris: i86pc Memory support (Jean-François BOUCHER) * Solaris Zone support (Maurizio BERTABONI) * Always send tag, even if server already has one * Add the byHand software collect method (Sébastien DAGNICOURT) * add logging to can_read(), can_load() and can_run() * use addUser() instead of setHardware() * Add the runcmd() in the Backend modules 1.0.1 Sun, 22 Mar 2009 20:48:49 +0100 * Fix a typo in Ocsinventory::Agent::Backend::OS::AIX::Memory 1.0 Sun, 22 Mar 2009 20:14:26 +0100 * Hide warning messages when tw_cli or hpacucli are not present on CentOS * Avoid unnecessary about missing 'http://' in local mode * Ipmi.pm: use can_run do detect ipmitool * LSB.pm: properly use can_run * Avoid a warning in CompatibilityLayer.pm in local mode * Improve the README file * Avoid a warning at runtime if rpm is not correctly installed * BSD: Detect AMD64 arch (David DURIEUX) * HP.pm: force detection even if slot 1 is 0 (Remi COLLET) * HP.pm minor clean up + indentation * HP.pm send the $model as NAME to avoid NAME == 'unknown' (Remi COLLET) * New backend module ServeRaid for IBM ServeRAID card (Remi COLLET) * Linux::Storages, fix the hdparm call (Remi COLLET) * OS::Generic::Dmidecode::Bios, fix for RHEL2 dmidecode (Remi COLLET) * launch backend modules with a 30sec timeout * post-inst.pl: use prompt() from ExtUtils::MakeMaker to avoid unexpected error with cpan * avoid the "No LSB modules are available." warning message * Backend: --debug print a warning when arun() function is not found * Fix the Debian/Ubuntu detection for non lsb system * postinst.pl also drop /etc/cron.d/ocsinventory-client is the user want to drop the old linux_agent * Backend::OS::Solaris::Memory: use the Logger instead of "print" * Solaris: Drop unwanted spaces around OSVERSION and STORAGES/DESCRIPTION * Solaris: Avoid warning is the user can't use fstyp * MANIFEST.SKIP: ignore .git/ and .gitignore * add a workaround for http://rt.cpan.org/Ticket/Display.html?id=38067 * build-perl-tree.sh use cpanp and perl 5.10 now * Backend.pm: do a eval around require File::Find * Add a workaround to find the backend modules for PAR::Packer * Backend.pm: internal change, now do eval 'use $pmodule' instead of require * fix serialnum detection in Lsilogic.pm and Adaptec.pm (Edouard GAMIN) * Makefile.PL: drop wait(), not used * Makefile.PL: fix a syntax error * add tools/makedist.sh to document the workaround used to avoid http://rt.cpan.org/Public/Bug/Display.html?id=43060 * Fix --logfile=/somewhere.log, see http://forums.ocsinventory-ng.org/viewtopic.php?id=3092 * tools/build-perl-tree.sh, add a new script * Don't print ugly error if next_timefile can't be saved * OS::Linux::Domains, improve the way it deals with multiple domaine entries (Remi COLLET) * AIX: Record the last memory Slot (Wilfried BRUNKEN) http://sourceforge.net/tracker/?func=detail&atid=487492&aid=2350694&group_id=58373 * Bump 0.0.10 to 1.0 because it's the first release to be officially part of the OCSInventory distribution 0.0.10beta2 Wed, 24 Sep 2008 23:41:21 +0200 * README: add a not about the $PATH varible on Solaris. * Added extra section support for backends (Pascal DANEK) * Fix the way submodules are disabled with $runMeIfTheseChecksFailed * Linux: Use lsb_release if presents to detect the OS, this will fix the Ubuntu detection * Hide a Perl warning if the agent is run by the user want the last_state file is missing * Add Ipmi backend module (Jean PARPAILLON) * Drop the control characters from the inventory XML https://sourceforge.net/tracker/index.php?func=detail&aid=2100606&group_id=58373&atid=487492 * Apply a little change in standalone.sh that may fix the ParserDetails.ini problem, thanks tharoun 0.0.10beta1 Thu, 04 Sep 2008 18:16:49 +0200 * Fix a "ocs server name" => URI side effect (Pascal DANEK) * Download::Store: used absolute path to "cp" on STORE action (Pascal DANEK) * Download::Store: set -dpR flags to "cp" (Pascal DANEK) * Solaris: Replaced hostid in serialnumber by real serialnumber (Nicolas DORFSMAN) (SUNWsneep becomes mandatory on sparc) * Solaris: Return only one IP address (trying to guess which one corresponds to hostname) (Nicolas DORFSMAN) * Solaris: return disks SERIALNUMBER and FIRMWARE as XML fields (Nicolas DORFSMAN) * Redirection and stderr issue on Solaris (Nicolas DORFSMAN) - Removed close of stderr fd - Modified lspci and screen check() to avoid pollution of stdout/stderr * fix the previous changelog entry, the 0.0.9.1 fix had been done by Nicolas DORFSMAN * postinst.pl checks for MANIFEST present * improve the backend module detection by also scanning the symlinked directory * add the --devlib flag to load ./lib only if wanted and remove '.' from the directory to scan with File::Find. * import the can_run, can_load and can_read functions in the Backend modules * the backend module can have no check function, in this case OCS assume it's ok * apply a patch by Etienne GUILLAUMONT to fix CPU detection on AIX 4 * standalone.sh checks PAR::Packer presence now * only inventory installed .deb * postinst.pl: accept another vardir if the first one was invalide https://sourceforge.net/tracker/?func=detail&atid=487492&aid=1961771&group_id=58373 * postinst.pl Download.pm correctly actived in modules.conf is the user needs it * add MacOSX support thanks to Wes YOUNG (Wes YOUNG) - Added tools/darwin/ support scripts/code for OS X enterprise deployment * add the follow_skip==2 flag to File::Find in Backend.pm so it doesn't detect the same file two time * import of backend module for RAID controler on Linux (3ware, Adaptec, HP and Lsilogic) (Edouard GAMIN) * remove a warning in Debug mod, if a backend module has no run() function * don't crash in Daemon mode if the server is unreachable (Wes YOUNG) * Net::IP is just (strongly) suggested now * fix --basevardir so it really accepts a parameter, thanks Gubluts from the forum who pointed out the bug * postinst.pl use which to find ocsinventory-agent location * Makefile.PL, Perl 5.6 doesn't have Config::config_re, I call it from an eval now * Added --delaytime option as commandline / .cfg file adjustable (Wes YOUNG) * standalone.sh, don't use grep -v since it's not POSIX * doesn't die if Storable.pm is missing like with perl 5.6 * avoid a warning with gzip -h on AIX if Compress::Zlib is missing * README: depends on Perl 5.8 * README: On solaris the Makefile needs gmake * README: Add a note about crontab and PATH * Linux: redirect hdparm error to /dev/null * postinst.pl yes/no questions have a default value now * postinst.pl fix a bug in the import of the old ocsinv.adm https://sourceforge.net/tracker/index.php?func=detail&aid=1991668&group_id=58373&atid=487492 * postinst.pl doesn't create two vardir directories anymore * do not print a wrning is --nosoftware is used. Thanks Knarfling and Remi who pointed the issue out. http://forums.ocsinventory-ng.org/viewtopic.php?pid=12569 * fix the POD documentation, some mistakes were detected by Perl 5.10's perldoc. * the agent doesn't crash anymore if ocsinv.adm or ocsinv.conf is corrupted * Makefile.pl: install memconf on Solaris * Solaris: apply patches to use memconf for CPU, Drives and Memory (Christoph HALMES) 0.0.9.2 04/18/2008 Bug fix * Add /ocsinventory in the server path if the user enter just the hostname https://sourceforge.net/tracker/?func=detail&atid=487492&aid=1945865&group_id=58373 0.0.9.1 04/03/2008 Bug fix * fix a error in the previous release that was forcing the local mode (Nicolas DORFSMAN) https://sourceforge.net/tracker/?func=detail&atid=487492&aid=1945863&group_id=58373 0.0.9 04/01/2008 April Fool release! * Added fallback for --lazy if no prolog freq was found and server error (Pascal DANEK) * Fixed accountinfos handling bugs (Pascal DANEK) * Changed --wait behaviour (--wait=number_of_seconds || "server") (Pascal DANEK) * PROLOG_FREQ is handled in prolog phase (Pascal DANEK) * the random value for file_nexttime is computed only if prolog_freq has changed since last prolog (Pascal DANEK) * import the documentation documentation by adding a description of the agent and pointer to the official website * --nosoft option renamed to --nosoftware, --nosoft still works but with a warning * add --basevardir to be able to use a specific place to store the var file * add the --lazy parameter: send an inventory only if the a random delay between 0 and PROLOG_FREQ had been run over. Usefull for package maintainer (Remi COLLET) * return 1 to the shell is the agent failed to contact the server * postinst.pl asks for the basevardir * postinst.pl write the modules.conf * OS::Linux::Network::Networks, correctly reset the ipaddress before every loop so now a network can't have the address of the previous one * rename the key $params->{conffile} to $params->{accountconfig} * fix the way accountinfo information are stored * improve (a bit) tools/standalone.sh to avoid error if people launch it from the tools directory * --server is ignore if --local is in use * adjust Backend::OS::Generic::Screen to be able to use monitor-edid with DVI link (Remi COLLET) * OS::Linux::Storages, add NEC as a know manufacturer add assume the manifacturer is Seagate if the model doesn't match the others and begin with ST (rjhill) * fix the CPU detection on Linux Sparc64 and ARM (Linksys NSLU2) * improve the Solaris version detection by reading the /etc/release file (Nicolas DORFSMAN) * Solaris: fix the MAC addresses when the leading zeros is missing (Jean-Jacques MICHEL) * Solaris: Add publisher is possible in the software list (Nicolas DORFSMAN) * Solaris: improve the hard drive detection (Nicolas DORFSMAN) * postinst.pl can remove the previous linux_agent * postinst.pl reuse linux_agent old config file to set the default server and tag * return the SERIALNUMBER and the FIRMWARE on Linux with hdparm, the feature is not supported yet by the server (egamin) 0.0.8.1 02/20/2008 * postinst.pl, correctly save the realm, do not override the password * Added "CAPTION" field to memory (Pascal DANEK) * Fix a bug with "NUMSLOTS" memory field (Pascal DANEK) * improve the parsing of the config file to accept quote and spaces in the value * postinst.pl save the configfile with 0600 right since the server password maybe be stored in it * standalone.sh doesn't scan the inc/ directory anymore * remove the BUNDLE packages which seem to break the install process * change Solaris::CPU to use psrinfo -v to get the CPUs which works fine on x86 * fix a path error in Ocsinventory::LoggerBackend::File (Remi COLLET) * fix: don't send the inventory if the server doesn't need it (Remi COLLET) 0.0.8 02/05/2008 * fix the deviceid and old_deviceid handling (Pascal DANEK) * fix a debug message in Network.pm (Pascal DANEK) * different fixes on Compress.pm (Pascal DANEK) * fix an event message name in Option/Download.pm (Pascal DANEK) * fix the Compatibility Layer with prolog_read hook (Pascal DANEK) * merge PowerPC and PC code to detect the CPU and improve/fix the regex * looks for config file in /etc/ocsinventory /usr/local/etc/ocsinventory and /etc/ocsinventory-agent * add a pod documentation about the different config files and directories * Compress::Zlib is required but recommended now. In fact, you need it with ocs server prior 1.02 0.0.7.2 01/16/2008 * fix the post installation script to avoid invalid cron time 0.0.7.1 01/14/2008 * add setup.sh in the MANIFEST.SKIP to keep it out of the tarball 0.0.7 01/13/2008 * Ocsinventory::Agent::AccountInfo does not warn accountinfofile if runned in debug mode without root privilege * fix params->{etcdir} to /etc/ocsinventory, /etc/ocsinventory-agent/modules.conf must be moved to /etc/ocsinventory/modules.conf * Solaris: Improve the CPU detection (Olivier ROUSSY) * AIX: Return the directory with the AIX package name (Olivier ROUSSY) * Ocsinventory::Agent::XML::Inventory can now write software inventory value of FILESIZE, FOLDER and PUBLISHER * processChecksum() and feedInventory() are called by Ocsinventory::Agent::XML::Inventory directly now * the server responses are not parsed in the main script anymore * do not create an inventory if the server doesnn't need it * new parameters for the backend modules (run and check functions): - prologresp, the Ocsinventory::Agent::XML::Response::Prolog object returned by the prolog - storage: an hashref stored on the harddrive at the end of the execution of the module * a backend module without a run function is accepted now * Inventory.pm: add addIpDiscoverEntry() to add host from the same network * @runMeIfTheseChecksFailed: new optional setting for Backend module * Ipdiscover is now a backend module and nmap can be used instead of ipdiscover * --nosoft disable the Ocsinventory::Agent::Backend::OS::Generic::Packaging modules * Remove the deprecated modules Ocsinventory::Agent::Option::Ipdiscover and Ocsinventory::Agent::Option::Update * the check function of the backend accepts the same parameter than the run function * Linux::Archs::I386 regex are more robust * perldoc documentation for the ocsinventory-agent command * minor improvment on the Makefile.PL * change the way --server parameter is read. Now we can have a full URL, --remotedir is now useless * fix: correctly load the last_state * improve the Makefile.PL by using inc::Module::Install and adding new check * add a --version parameter and improve the --help * come with bundled dependency to simply the build process * fix the login/passwd/realm authentification * remove Agent/Pid.pm, I've to prepare a better system to keep the pid first * try to read the config in /usr/local/etc/ocsinventory/ocsinventory-agent.cfg if the standard one is missing 0.0.6.2 07/16/2007 Bug fix release * remove a debug "die" in the code 0.0.6.1 06/12/2007 Bug fix release * Fix an undef value in Ocsinventory::Agent::Backend::OS::BSD::Mem * AIX: retrieve correctly the MAC address of some FibberChannel card * now standalone.sh will try to find every module before the build to avoid unexplicated error 0.0.6 06/07/2007 * Enable "verbose" is debug is turned on * AIX: Ocsinventory::Agent::Backend::OS::AIX::Networks rewrote * AIX: Memory.pm, remove the spaces from the end of the DESCRIPTION * add standalone.sh, a script designed to prepare a stand-alone binary of the agent * AIX: Retrieve all the gateway of every subnet instead of just the default one * Config.pm renamed to AccountConfig.pm * New flag: --stdout to print the inventory directly on STDOUT * If the use want write on the system var directory, the agent create one in ~/.ocsinventory/var * The agent setting can be preinitialised with /etc/ocsinventory/ocsinventory-agent.cfg or ~/ocsinventory/ocsinventory-agent.cfg. * remove two debug messages printed during accountinfo rewrite and the daemon starting process * remove a stupid check in Ocsinventory::Agent::AccountConfig, the accountconfig file was not written unless the file was already present * add a recMkdir function in ocsinventory-agent to create directory recursivly * do not process checksum in local mode 0.0.5 04/17/2007 * AIX: use lslpp -c -l to find installed packages * AIX: fixes on CPU.pm, Networks.pm and Memory.pm * AIX: fetch the serial number with lscfg unless it was found with lsvpd * add the .ocs extension to local written files * with --local flag: don't not warn if last_state doesn't exit * Solaris: retrieve installed package * downgrade some message important from info to debug * read screen serial number in the EDID (DDC screen) * Xorg.pm replaced by Screen.pm * Screen.pm all the data are read from EDID now * Initial Linux PPC support (tested in Debian Etch). thanks Walid Nouh for the hardware * Apply patch by Remi Collet to fix an issue with Linux distro detection and Perl 5.6.1 * Turn of STDERR during the module execution to avoid useless message (e.g: foo: not found) use --debug to turn them back * If the system side vardir can't be created. The agent try to create one in ~/.ocs-inventory-agent * Add a THANKS file 0.0.4 03/20/2007 * use of gzip when Compress:Zlib is not avalaible. OCS server 1.01 and prior are not supported. * dmidecode parsing improved * lspci stuffs moved to generic * Linux: find Wifi connection * fix: pass correctly the logger to the modules * don't write the last_state is the connexion failed * Deals correctly with the accountinfo if it's internaly stored in a array ref * BSD support by Thierry Lacoste