/* * MUSCLE SmartCard Development ( http://www.linuxnet.com ) * * Copyright (C) 1999-2004 * David Corcoran * Copyright (C) 2002-2011 * Ludovic Rousseau * Copyright (C) 2005 * Martin Paljak * * $Id: pcsclite.h.in 5736 2011-05-12 08:43:33Z rousseau $ */ /** * @file * @brief This keeps a list of defines for pcsc-lite. * * Error codes from http://msdn.microsoft.com/en-us/library/aa924526.aspx */ #ifndef __pcsclite_h__ #define __pcsclite_h__ #include #ifdef __cplusplus extern "C" { #endif typedef LONG SCARDCONTEXT; /**< \p hContext returned by SCardEstablishContext() */ typedef SCARDCONTEXT *PSCARDCONTEXT; typedef SCARDCONTEXT *LPSCARDCONTEXT; typedef LONG SCARDHANDLE; /**< \p hCard returned by SCardConnect() */ typedef SCARDHANDLE *PSCARDHANDLE; typedef SCARDHANDLE *LPSCARDHANDLE; #define MAX_ATR_SIZE 33 /**< Maximum ATR size */ /* Set structure elements aligment on bytes * http://gcc.gnu.org/onlinedocs/gcc/Structure_002dPacking-Pragmas.html */ #ifdef __APPLE__ #pragma pack(1) #endif typedef struct { const char *szReader; void *pvUserData; DWORD dwCurrentState; DWORD dwEventState; DWORD cbAtr; unsigned char rgbAtr[MAX_ATR_SIZE]; } SCARD_READERSTATE, *LPSCARD_READERSTATE; /** Protocol Control Information (PCI) */ typedef struct { unsigned long dwProtocol; /**< Protocol identifier */ unsigned long cbPciLength; /**< Protocol Control Inf Length */ } SCARD_IO_REQUEST, *PSCARD_IO_REQUEST, *LPSCARD_IO_REQUEST; typedef const SCARD_IO_REQUEST *LPCSCARD_IO_REQUEST; extern const SCARD_IO_REQUEST g_rgSCardT0Pci, g_rgSCardT1Pci, g_rgSCardRawPci; /* restore default structure elements alignment */ #ifdef __APPLE__ #pragma pack() #endif #define SCARD_PCI_T0 (&g_rgSCardT0Pci) /**< protocol control information (PCI) for T=0 */ #define SCARD_PCI_T1 (&g_rgSCardT1Pci) /**< protocol control information (PCI) for T=1 */ #define SCARD_PCI_RAW (&g_rgSCardRawPci) /**< protocol control information (PCI) for RAW protocol */ /** error codes from http://msdn.microsoft.com/en-us/library/aa924526.aspx */ #define SCARD_S_SUCCESS ((LONG)0x00000000) /**< No error was encountered. */ #define SCARD_F_INTERNAL_ERROR ((LONG)0x80100001) /**< An internal consistency check failed. */ #define SCARD_E_CANCELLED ((LONG)0x80100002) /**< The action was cancelled by an SCardCancel request. */ #define SCARD_E_INVALID_HANDLE ((LONG)0x80100003) /**< The supplied handle was invalid. */ #define SCARD_E_INVALID_PARAMETER ((LONG)0x80100004) /**< One or more of the supplied parameters could not be properly interpreted. */ #define SCARD_E_INVALID_TARGET ((LONG)0x80100005) /**< Registry startup information is missing or invalid. */ #define SCARD_E_NO_MEMORY ((LONG)0x80100006) /**< Not enough memory available to complete this command. */ #define SCARD_F_WAITED_TOO_LONG ((LONG)0x80100007) /**< An internal consistency timer has expired. */ #define SCARD_E_INSUFFICIENT_BUFFER ((LONG)0x80100008) /**< The data buffer to receive returned data is too small for the returned data. */ #define SCARD_E_UNKNOWN_READER ((LONG)0x80100009) /**< The specified reader name is not recognized. */ #define SCARD_E_TIMEOUT ((LONG)0x8010000A) /**< The user-specified timeout value has expired. */ #define SCARD_E_SHARING_VIOLATION ((LONG)0x8010000B) /**< The smart card cannot be accessed because of other connections outstanding. */ #define SCARD_E_NO_SMARTCARD ((LONG)0x8010000C) /**< The operation requires a Smart Card, but no Smart Card is currently in the device. */ #define SCARD_E_UNKNOWN_CARD ((LONG)0x8010000D) /**< The specified smart card name is not recognized. */ #define SCARD_E_CANT_DISPOSE ((LONG)0x8010000E) /**< The system could not dispose of the media in the requested manner. */ #define SCARD_E_PROTO_MISMATCH ((LONG)0x8010000F) /**< The requested protocols are incompatible with the protocol currently in use with the smart card. */ #define SCARD_E_NOT_READY ((LONG)0x80100010) /**< The reader or smart card is not ready to accept commands. */ #define SCARD_E_INVALID_VALUE ((LONG)0x80100011) /**< One or more of the supplied parameters values could not be properly interpreted. */ #define SCARD_E_SYSTEM_CANCELLED ((LONG)0x80100012) /**< The action was cancelled by the system, presumably to log off or shut down. */ #define SCARD_F_COMM_ERROR ((LONG)0x80100013) /**< An internal communications error has been detected. */ #define SCARD_F_UNKNOWN_ERROR ((LONG)0x80100014) /**< An internal error has been detected, but the source is unknown. */ #define SCARD_E_INVALID_ATR ((LONG)0x80100015) /**< An ATR obtained from the registry is not a valid ATR string. */ #define SCARD_E_NOT_TRANSACTED ((LONG)0x80100016) /**< An attempt was made to end a non-existent transaction. */ #define SCARD_E_READER_UNAVAILABLE ((LONG)0x80100017) /**< The specified reader is not currently available for use. */ #define SCARD_P_SHUTDOWN ((LONG)0x80100018) /**< The operation has been aborted to allow the server application to exit. */ #define SCARD_E_PCI_TOO_SMALL ((LONG)0x80100019) /**< The PCI Receive buffer was too small. */ #define SCARD_E_READER_UNSUPPORTED ((LONG)0x8010001A) /**< The reader driver does not meet minimal requirements for support. */ #define SCARD_E_DUPLICATE_READER ((LONG)0x8010001B) /**< The reader driver did not produce a unique reader name. */ #define SCARD_E_CARD_UNSUPPORTED ((LONG)0x8010001C) /**< The smart card does not meet minimal requirements for support. */ #define SCARD_E_NO_SERVICE ((LONG)0x8010001D) /**< The Smart card resource manager is not running. */ #define SCARD_E_SERVICE_STOPPED ((LONG)0x8010001E) /**< The Smart card resource manager has shut down. */ #define SCARD_E_UNEXPECTED ((LONG)0x8010001F) /**< An unexpected card error has occurred. */ #define SCARD_E_UNSUPPORTED_FEATURE ((LONG)0x8010001F) /**< This smart card does not support the requested feature. */ #define SCARD_E_ICC_INSTALLATION ((LONG)0x80100020) /**< No primary provider can be found for the smart card. */ #define SCARD_E_ICC_CREATEORDER ((LONG)0x80100021) /**< The requested order of object creation is not supported. */ /* #define SCARD_E_UNSUPPORTED_FEATURE ((LONG)0x80100022) / **< This smart card does not support the requested feature. */ #define SCARD_E_DIR_NOT_FOUND ((LONG)0x80100023) /**< The identified directory does not exist in the smart card. */ #define SCARD_E_FILE_NOT_FOUND ((LONG)0x80100024) /**< The identified file does not exist in the smart card. */ #define SCARD_E_NO_DIR ((LONG)0x80100025) /**< The supplied path does not represent a smart card directory. */ #define SCARD_E_NO_FILE ((LONG)0x80100026) /**< The supplied path does not represent a smart card file. */ #define SCARD_E_NO_ACCESS ((LONG)0x80100027) /**< Access is denied to this file. */ #define SCARD_E_WRITE_TOO_MANY ((LONG)0x80100028) /**< The smart card does not have enough memory to store the information. */ #define SCARD_E_BAD_SEEK ((LONG)0x80100029) /**< There was an error trying to set the smart card file object pointer. */ #define SCARD_E_INVALID_CHV ((LONG)0x8010002A) /**< The supplied PIN is incorrect. */ #define SCARD_E_UNKNOWN_RES_MNG ((LONG)0x8010002B) /**< An unrecognized error code was returned from a layered component. */ #define SCARD_E_NO_SUCH_CERTIFICATE ((LONG)0x8010002C) /**< The requested certificate does not exist. */ #define SCARD_E_CERTIFICATE_UNAVAILABLE ((LONG)0x8010002D) /**< The requested certificate could not be obtained. */ #define SCARD_E_NO_READERS_AVAILABLE ((LONG)0x8010002E) /**< Cannot find a smart card reader. */ #define SCARD_E_COMM_DATA_LOST ((LONG)0x8010002F) /**< A communications error with the smart card has been detected. Retry the operation. */ #define SCARD_E_NO_KEY_CONTAINER ((LONG)0x80100030) /**< The requested key container does not exist on the smart card. */ #define SCARD_E_SERVER_TOO_BUSY ((LONG)0x80100031) /**< The Smart Card Resource Manager is too busy to complete this operation. */ #define SCARD_W_UNSUPPORTED_CARD ((LONG)0x80100065) /**< The reader cannot communicate with the card, due to ATR string configuration conflicts. */ #define SCARD_W_UNRESPONSIVE_CARD ((LONG)0x80100066) /**< The smart card is not responding to a reset. */ #define SCARD_W_UNPOWERED_CARD ((LONG)0x80100067) /**< Power has been removed from the smart card, so that further communication is not possible. */ #define SCARD_W_RESET_CARD ((LONG)0x80100068) /**< The smart card has been reset, so any shared state information is invalid. */ #define SCARD_W_REMOVED_CARD ((LONG)0x80100069) /**< The smart card has been removed, so further communication is not possible. */ #define SCARD_W_SECURITY_VIOLATION ((LONG)0x8010006A) /**< Access was denied because of a security violation. */ #define SCARD_W_WRONG_CHV ((LONG)0x8010006B) /**< The card cannot be accessed because the wrong PIN was presented. */ #define SCARD_W_CHV_BLOCKED ((LONG)0x8010006C) /**< The card cannot be accessed because the maximum number of PIN entry attempts has been reached. */ #define SCARD_W_EOF ((LONG)0x8010006D) /**< The end of the smart card file has been reached. */ #define SCARD_W_CANCELLED_BY_USER ((LONG)0x8010006E) /**< The user pressed "Cancel" on a Smart Card Selection Dialog. */ #define SCARD_W_CARD_NOT_AUTHENTICATED ((LONG)0x8010006F) /**< No PIN was presented to the smart card. */ #define SCARD_AUTOALLOCATE (DWORD)(-1) /**< see SCardFreeMemory() */ #define SCARD_SCOPE_USER 0x0000 /**< Scope in user space */ #define SCARD_SCOPE_TERMINAL 0x0001 /**< Scope in terminal */ #define SCARD_SCOPE_SYSTEM 0x0002 /**< Scope in system */ #define SCARD_PROTOCOL_UNDEFINED 0x0000 /**< protocol not set */ #define SCARD_PROTOCOL_UNSET SCARD_PROTOCOL_UNDEFINED /* backward compat */ #define SCARD_PROTOCOL_T0 0x0001 /**< T=0 active protocol. */ #define SCARD_PROTOCOL_T1 0x0002 /**< T=1 active protocol. */ #define SCARD_PROTOCOL_RAW 0x0004 /**< Raw active protocol. */ #define SCARD_PROTOCOL_T15 0x0008 /**< T=15 protocol. */ #define SCARD_PROTOCOL_ANY (SCARD_PROTOCOL_T0|SCARD_PROTOCOL_T1) /**< IFD determines prot. */ #define SCARD_SHARE_EXCLUSIVE 0x0001 /**< Exclusive mode only */ #define SCARD_SHARE_SHARED 0x0002 /**< Shared mode only */ #define SCARD_SHARE_DIRECT 0x0003 /**< Raw mode only */ #define SCARD_LEAVE_CARD 0x0000 /**< Do nothing on close */ #define SCARD_RESET_CARD 0x0001 /**< Reset on close */ #define SCARD_UNPOWER_CARD 0x0002 /**< Power down on close */ #define SCARD_EJECT_CARD 0x0003 /**< Eject on close */ #define SCARD_UNKNOWN 0x0001 /**< Unknown state */ #define SCARD_ABSENT 0x0002 /**< Card is absent */ #define SCARD_PRESENT 0x0004 /**< Card is present */ #define SCARD_SWALLOWED 0x0008 /**< Card not powered */ #define SCARD_POWERED 0x0010 /**< Card is powered */ #define SCARD_NEGOTIABLE 0x0020 /**< Ready for PTS */ #define SCARD_SPECIFIC 0x0040 /**< PTS has been set */ #define SCARD_STATE_UNAWARE 0x0000 /**< App wants status */ #define SCARD_STATE_IGNORE 0x0001 /**< Ignore this reader */ #define SCARD_STATE_CHANGED 0x0002 /**< State has changed */ #define SCARD_STATE_UNKNOWN 0x0004 /**< Reader unknown */ #define SCARD_STATE_UNAVAILABLE 0x0008 /**< Status unavailable */ #define SCARD_STATE_EMPTY 0x0010 /**< Card removed */ #define SCARD_STATE_PRESENT 0x0020 /**< Card inserted */ #define SCARD_STATE_ATRMATCH 0x0040 /**< ATR matches card */ #define SCARD_STATE_EXCLUSIVE 0x0080 /**< Exclusive Mode */ #define SCARD_STATE_INUSE 0x0100 /**< Shared Mode */ #define SCARD_STATE_MUTE 0x0200 /**< Unresponsive card */ #define SCARD_STATE_UNPOWERED 0x0400 /**< Unpowered card */ #ifndef INFINITE #define INFINITE 0xFFFFFFFF /**< Infinite timeout */ #endif #define PCSCLITE_VERSION_NUMBER "1.7.4" /**< Current version */ /** Maximum readers context (a slot is count as a reader) */ #define PCSCLITE_MAX_READERS_CONTEXTS 16 #define MAX_READERNAME 100 #ifndef SCARD_ATR_LENGTH #define SCARD_ATR_LENGTH MAX_ATR_SIZE /**< Maximum ATR size */ #endif /* * The message and buffer sizes must be multiples of 16. * The max message size must be at least large enough * to accomodate the transmit_struct */ #define MAX_BUFFER_SIZE 264 /**< Maximum Tx/Rx Buffer for short APDU */ #define MAX_BUFFER_SIZE_EXTENDED (4 + 3 + (1<<16) + 3) /**< enhanced (64K + APDU + Lc + Le) Tx/Rx Buffer */ /* * Gets a stringified error response */ char *pcsc_stringify_error(const LONG); #ifdef __cplusplus } #endif #endif