# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # -*- Mode: Makefile -*- # # Makefile.am - automake file for Raptor Feed tests # # Copyright (C) 2009, David Beckett http://www.dajobe.org/ # # This package is Free Software and part of Redland http://librdf.org/ # # It is licensed under the following three licenses as alternatives: # 1. GNU Lesser General Public License (LGPL) V2.1 or any newer version # 2. GNU General Public License (GPL) V2 or any newer version # 3. Apache License, V2.0 or any newer version # # You may not use this file except in compliance with at least one of # the above three licenses. # # See LICENSE.html or LICENSE.txt at the top of this package for the # complete terms and further detail along with the license texts for # the licenses in COPYING.LIB, COPYING and LICENSE-2.0.txt respectively. # # VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ @RAPTOR_PARSER_RDFXML_TRUE@am__append_1 = check-rdfxml-to-turtle @RAPTOR_PARSER_RSS_TRUE@am__append_2 = check-atom-to-turtle @RAPTOR_SERIALIZER_ATOM_TRUE@am__append_3 = check-serialize-atom @MAINTAINER_MODE_TRUE@am__append_4 = check-validate-atom subdir = tests/feeds DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/build/gtk-doc.m4 \ $(top_srcdir)/build/libtool.m4 \ $(top_srcdir)/build/ltoptions.m4 \ $(top_srcdir)/build/ltsugar.m4 \ $(top_srcdir)/build/ltversion.m4 \ $(top_srcdir)/build/lt~obsolete.m4 $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/src/raptor_config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_GEN = $(am__v_GEN_$(V)) am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) am__v_GEN_0 = @echo " GEN " $@; AM_V_at = $(am__v_at_$(V)) am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) am__v_at_0 = @ SOURCES = DIST_SOURCES = DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CURL_CONFIG = @CURL_CONFIG@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GREP = @GREP@ GTKDOC_CHECK = @GTKDOC_CHECK@ GTKDOC_MKPDF = @GTKDOC_MKPDF@ GTKDOC_REBASE = @GTKDOC_REBASE@ HTML_DIR = @HTML_DIR@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ LEX = @LEX@ LEXLIB = @LEXLIB@ LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MEM = @MEM@ MEM_LIBS = @MEM_LIBS@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ PKG_CONFIG = @PKG_CONFIG@ RANLIB = @RANLIB@ RAPTOR_LDFLAGS = @RAPTOR_LDFLAGS@ RAPTOR_LIBTOOLLIBS = @RAPTOR_LIBTOOLLIBS@ RAPTOR_LIBTOOL_VERSION = @RAPTOR_LIBTOOL_VERSION@ RAPTOR_PARSERS = @RAPTOR_PARSERS@ RAPTOR_SERIALIZERS = @RAPTOR_SERIALIZERS@ RAPTOR_VERSION_DECIMAL = @RAPTOR_VERSION_DECIMAL@ RAPTOR_WWW_LIBRARY = @RAPTOR_WWW_LIBRARY@ RAPTOR_XML_PARSER = @RAPTOR_XML_PARSER@ RPM_RELEASE = @RPM_RELEASE@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ TAR = @TAR@ VERSION = @VERSION@ XML_CONFIG = @XML_CONFIG@ XSLT_CONFIG = @XSLT_CONFIG@ YACC = @YACC@ YFLAGS = @YFLAGS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ # Input RDF/XML (atom model) files - rdfxml parser TEST_IN_RDF_ATOMS = test01.rdf test02.rdf test03.rdf # Input Atom 1.0 (atom model) files - rss-tag-soup parser TEST_IN_ATOMS = test04.atom test05.atom # Output files in Turtle (after parsing) and Atom (after serializing) OUT_RDF_TTLS = $(TEST_IN_RDF_ATOMS:.rdf=.ttl) OUT_ATOM_TTLS = $(TEST_IN_ATOMS:.atom=.ttl) OUT_RDF_ATOMS = $(TEST_IN_RDF_ATOMS:.rdf=.atom) # Expected results for above EXPECTED_TTLS = $(OUT_RDF_TTLS:.ttl=-result.ttl) $(OUT_ATOM_TTLS:.ttl=-result.ttl) EXPECTED_ATOMS = $(OUT_RDF_ATOMS:.atom=-result.atom) # Files generated during testing (to delete/clean) OUT_TTLS = $(OUT_RDF_TTLS) $(OUT_ATOM_TTLS) OUT_ATOMS = $(OUT_RDF_ATOMS) EXTRA_DIST = \ $(TEST_IN_RDF_ATOMS) $(TEST_IN_ATOMS) \ $(EXPECTED_TTLS) $(EXPECTED_ATOMS) \ atom.rng atom.rnc CLEANFILES = $(OUT_ATOMS) $(OUT_TTLS) errors.log RAPPER = $(top_builddir)/utils/rapper FEED_TESTS = $(am__append_1) $(am__append_2) $(am__append_3) \ $(am__append_4) @MAINTAINER_MODE_TRUE@SUFFIXES = .rng .rnc all: all-am .SUFFIXES: .SUFFIXES: .rng .rnc $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu tests/feeds/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu tests/feeds/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs tags: TAGS TAGS: ctags: CTAGS CTAGS: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am $(MAKE) $(AM_MAKEFLAGS) check-local check: check-am all-am: Makefile installdirs: install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: .MAKE: check-am install-am install-strip .PHONY: all all-am check check-am check-local clean clean-generic \ clean-libtool distclean distclean-generic distclean-libtool \ distdir dvi dvi-am html html-am info info-am install \ install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-info install-info-am install-man \ install-pdf install-pdf-am install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ uninstall uninstall-am build-rapper: @(cd $(top_builddir)/utils ; $(MAKE) rapper$(EXEEXT)) check-local: build-rapper $(FEED_TESTS) # Parse from RDF/XML and Serialize to Turtle check-rdfxml-to-turtle: $(TEST_IN_RDF_ATOMS) @set +e; result=0; \ $(ECHO) "Testing RDF/XML to Turtle"; \ for test in $?; do \ parser=rdfxml; \ name=`basename $$test .rdf` ; \ turtle="$$name.ttl"; \ expected="$$name-result.ttl"; \ opts="-f writeBaseURI=0"; \ if test $$name = test01; then \ baseuri="http://example.org/whatsnew"; \ elif test $$name = test02; then \ baseuri="http://example.org/news/"; \ elif test $$name = test03; then \ baseuri="http://example.org"; \ fi; \ opts="-q -i $$parser -o turtle $$opts -O $$baseuri"; \ $(ECHO) $(ECHO_N) "Checking $$test $(ECHO_C)"; \ $(RAPPER) $$opts file:$(srcdir)/$$test > $$turtle 2> errors.log; \ status=$$?; \ if test $$status != 0; then \ $(ECHO) "FAILED with code $$status"; \ $(ECHO) "$(RAPPER) $$opts file:$(srcdir)/$$test"; \ cat errors.log ; \ result=1 ; \ elif cmp $(srcdir)/$$expected $$turtle >/dev/null 2>&1; then \ $(ECHO) "ok"; \ else \ $(ECHO) "FAILED"; \ $(ECHO) "$(RAPPER) $$opts file:$(srcdir)/$$test"; \ diff -u $(srcdir)/$$expected $$turtle; result=1; \ fi; \ rm -f errors.log ; \ done; \ set -e; exit $$result # Parser from Atom and Serialize to Turtle check-atom-to-turtle: $(TEST_IN_ATOMS) @set +e; result=0; \ $(ECHO) "Testing Atom to Turtle"; \ for test in $?; do \ parser=rss-tag-soup; \ name=`basename $$test .atom` ; \ turtle="$$name.ttl"; \ expected="$$name-result.ttl"; \ opts="-f writeBaseURI=0"; \ baseuri="http://www.example.org/blog/"; \ if test $$name = test04; then \ baseuri="http://www.example.org/blog/"; \ fi; \ opts="-q -i $$parser -o turtle $$opts -O $$baseuri"; \ $(ECHO) $(ECHO_N) "Checking $$test $(ECHO_C)"; \ $(RAPPER) $$opts file:$(srcdir)/$$test > $$turtle 2> errors.log; \ status=$$?; \ if test $$status != 0; then \ $(ECHO) "FAILED with code $$status"; \ $(ECHO) "$(RAPPER) $$opts file:$(srcdir)/$$test"; \ cat errors.log ; \ result=1 ; \ elif cmp $(srcdir)/$$expected $$turtle >/dev/null 2>&1; then \ $(ECHO) "ok"; \ else \ $(ECHO) "FAILED"; \ $(ECHO) "$(RAPPER) $$opts file:$(srcdir)/$$test"; \ diff -u $(srcdir)/$$expected $$turtle; result=1; \ fi; \ rm -f errors.log ; \ done; \ set -e; exit $$result # Parser from Turtle and Serialize to Atom check-serialize-atom: $(OUT_RDF_TTLS) @set +e; result=0; \ $(ECHO) "Testing Turtle to Atom XML"; \ for test in $(OUT_RDF_TTLS); do \ name=`basename $$test .ttl` ; \ atom="$$name.atom"; \ expected="$$name-result.atom"; \ opts="-f writeBaseURI=0 -f rssTriples=atom-triples"; \ if test $$name = test01; then \ baseuri="http://example.org/whatsnew"; \ opts="$$opts -f atomEntryUri=http://example.org/2006/03/28/blog-item"; \ elif test $$name = test02; then \ baseuri="http://example.org/news/"; \ elif test $$name = test03; then \ baseuri="http://example.org"; \ fi; \ opts="-q -i turtle -o atom $$opts -I $$baseuri -O $$baseuri"; \ $(ECHO) $(ECHO_N) "Checking $$test $(ECHO_C)"; \ $(RAPPER) $$opts file:$$test > $$atom 2> errors.log; \ status=$$?; \ if test $$status != 0; then \ $(ECHO) "FAILED with code $$status"; \ $(ECHO) "$(RAPPER) $$opts file:$$test"; \ cat errors.log ; \ result=1 ; \ elif cmp $(srcdir)/$$expected $$atom >/dev/null 2>&1; then \ $(ECHO) "ok"; \ else \ $(ECHO) "FAILED"; \ $(ECHO) "$(RAPPER) $$opts file:$(srcdir)/$$test"; \ diff -u $(srcdir)/$$expected $$atom; result=1; \ fi; \ rm -f errors.log ; \ done; \ set -e; exit $$result @MAINTAINER_MODE_TRUE@.rnc.rng: @MAINTAINER_MODE_TRUE@ trang $? $@ @MAINTAINER_MODE_TRUE@check-validate-atom: $(srcdir)/atom.rng $(OUT_ATOMS) $(TEST_IN_ATOMS) @MAINTAINER_MODE_TRUE@ @set +e; result=0; \ @MAINTAINER_MODE_TRUE@ $(ECHO) "Validating Atom XML with RelaxNG"; \ @MAINTAINER_MODE_TRUE@ for atom in $(OUT_ATOMS) $(TEST_IN_ATOMS); do \ @MAINTAINER_MODE_TRUE@ $(ECHO) $(ECHO_N) "Validating $$atom $(ECHO_C)"; \ @MAINTAINER_MODE_TRUE@ jing $(srcdir)/atom.rng $$atom > errors.log 2>&1; \ @MAINTAINER_MODE_TRUE@ status=$$?; \ @MAINTAINER_MODE_TRUE@ if test $$status != 0; then \ @MAINTAINER_MODE_TRUE@ $(ECHO) "FAILED with code $$status"; result=1; \ @MAINTAINER_MODE_TRUE@ $(ECHO) jing $(srcdir)/atom.rng $$atom; \ @MAINTAINER_MODE_TRUE@ sed -e "s,^.*$$atom,$$atom," errors.log ; \ @MAINTAINER_MODE_TRUE@ result=1 ; \ @MAINTAINER_MODE_TRUE@ else \ @MAINTAINER_MODE_TRUE@ $(ECHO) "ok"; \ @MAINTAINER_MODE_TRUE@ fi; \ @MAINTAINER_MODE_TRUE@ rm -f errors.log; \ @MAINTAINER_MODE_TRUE@ done; \ @MAINTAINER_MODE_TRUE@ set -e; exit $$result # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: