# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # -*- Mode: Makefile -*- # # Makefile.am - automake file for Raptor Turtle tests # # Copyright (C) 2003-2009, David Beckett http://www.dajobe.org/ # Copyright (C) 2003-2004, University of Bristol, UK http://www.bristol.ac.uk/ # # This package is Free Software and part of Redland http://librdf.org/ # # It is licensed under the following three licenses as alternatives: # 1. GNU Lesser General Public License (LGPL) V2.1 or any newer version # 2. GNU General Public License (GPL) V2 or any newer version # 3. Apache License, V2.0 or any newer version # # You may not use this file except in compliance with at least one of # the above three licenses. # # See LICENSE.html or LICENSE.txt at the top of this package for the # complete terms and further detail along with the license texts for # the licenses in COPYING.LIB, COPYING and LICENSE-2.0.txt respectively. # # VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = tests/turtle DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/build/gtk-doc.m4 \ $(top_srcdir)/build/libtool.m4 \ $(top_srcdir)/build/ltoptions.m4 \ $(top_srcdir)/build/ltsugar.m4 \ $(top_srcdir)/build/ltversion.m4 \ $(top_srcdir)/build/lt~obsolete.m4 $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/src/raptor_config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_GEN = $(am__v_GEN_$(V)) am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) am__v_GEN_0 = @echo " GEN " $@; AM_V_at = $(am__v_at_$(V)) am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) am__v_at_0 = @ SOURCES = DIST_SOURCES = DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CURL_CONFIG = @CURL_CONFIG@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GREP = @GREP@ GTKDOC_CHECK = @GTKDOC_CHECK@ GTKDOC_MKPDF = @GTKDOC_MKPDF@ GTKDOC_REBASE = @GTKDOC_REBASE@ HTML_DIR = @HTML_DIR@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ LEX = @LEX@ LEXLIB = @LEXLIB@ LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MEM = @MEM@ MEM_LIBS = @MEM_LIBS@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ PKG_CONFIG = @PKG_CONFIG@ RANLIB = @RANLIB@ RAPTOR_LDFLAGS = @RAPTOR_LDFLAGS@ RAPTOR_LIBTOOLLIBS = @RAPTOR_LIBTOOLLIBS@ RAPTOR_LIBTOOL_VERSION = @RAPTOR_LIBTOOL_VERSION@ RAPTOR_PARSERS = @RAPTOR_PARSERS@ RAPTOR_SERIALIZERS = @RAPTOR_SERIALIZERS@ RAPTOR_VERSION_DECIMAL = @RAPTOR_VERSION_DECIMAL@ RAPTOR_WWW_LIBRARY = @RAPTOR_WWW_LIBRARY@ RAPTOR_XML_PARSER = @RAPTOR_XML_PARSER@ RPM_RELEASE = @RPM_RELEASE@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ TAR = @TAR@ VERSION = @VERSION@ XML_CONFIG = @XML_CONFIG@ XSLT_CONFIG = @XSLT_CONFIG@ YACC = @YACC@ YFLAGS = @YFLAGS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ RDFXML_DIR = ../rdfxml NTRIPLES_DIR = ../ntriples TEST_FILES = test-00.ttl test-01.ttl test-02.ttl test-03.ttl \ test-04.ttl test-05.ttl test-06.ttl test-07.ttl test-08.ttl \ test-09.ttl test-10.ttl test-11.ttl test-12.ttl test-13.ttl \ test-14.ttl test-15.ttl test-16.ttl test-17.ttl test-18.ttl \ test-19.ttl test-20.ttl test-21.ttl test-22.ttl test-23.ttl \ test-24.ttl test-25.ttl test-26.ttl test-27.ttl \ test-29.ttl test-30.ttl test-33.ttl \ rdf-schema.ttl \ rdfs-namespace.ttl \ rdfq-results.ttl TEST_BAD_FILES = bad-00.ttl bad-01.ttl bad-02.ttl bad-03.ttl \ bad-04.ttl bad-05.ttl bad-06.ttl bad-07.ttl bad-08.ttl bad-09.ttl \ bad-10.ttl bad-11.ttl bad-12.ttl bad-13.ttl bad-14.ttl \ bad-17.ttl bad-18.ttl bad-19.ttl bad-20.ttl bad-21.ttl bad-22.ttl TEST_WARN_FILES = TEST_OUT_FILES = test-00.out test-01.out test-02.out test-03.out \ test-04.out test-05.out test-06.out test-07.out test-08.out \ test-09.out test-10.out test-11.out test-12.out test-13.out \ test-14.out test-15.out test-16.out test-17.out test-18.out \ test-19.out test-20.out test-21.out test-22.out test-23.out \ test-24.out test-25.out test-26.out test-27.out test-28.out \ test-29.out test-30.out test-33.out \ rdf-schema.out \ rdfs-namespace.out \ rdfq-results.out TEST_SERIALIZE_FILES = \ test-28.ttl test-31.ttl test-32.ttl test-34.ttl TEST_SERIALIZE_OUT_FILES = \ test-28-out.ttl test-31-out.ttl test-32-out.ttl test-34-out.ttl TURTLE_HACK_OUT_FILES = \ ex-38-turtle.out TURTLE_SERIALIZE_RDF_FILES = ex-62.rdf TEST_WARN_OUT_FILES = TEST_MANIFEST_FILES = manifest.ttl manifest-bad.ttl # Used to make N-triples output consistent BASE_URI = http://www.w3.org/2001/sw/DataAccess/df1/tests/ # for rdf-schema.ttl RDF_NS_URI = http://www.w3.org/1999/02/22-rdf-syntax-ns # for rdfs-namespace.ttl RDFS_NS_URI = http://www.w3.org/2000/01/rdf-schema ALL_TEST_FILES = README.txt \ $(TEST_FILES) \ $(TEST_BAD_FILES) \ $(TEST_WARN_FILES) \ $(TEST_OUT_FILES) \ $(TEST_WARN_OUT_FILES) \ $(TEST_MANIFEST_FILES) \ $(TEST_SERIALIZE_FILES) \ $(TEST_SERIALIZE_OUT_FILES) \ $(TURTLE_SERIALIZE_RDF_TEST_FILES) \ $(TURTLE_SERIALIZE_RDF_FILES) \ $(TURTLE_HACK_OUT_FILES) EXTRA_DIST = $(ALL_TEST_FILES) all: all-am .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu tests/turtle/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu tests/turtle/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs tags: TAGS TAGS: ctags: CTAGS CTAGS: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am $(MAKE) $(AM_MAKEFLAGS) check-local check: check-am all-am: Makefile installdirs: install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: .MAKE: check-am install-am install-strip .PHONY: all all-am check check-am check-local clean clean-generic \ clean-libtool distclean distclean-generic distclean-libtool \ distdir dvi dvi-am html html-am info info-am install \ install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-info install-info-am install-man \ install-pdf install-pdf-am install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ uninstall uninstall-am build-rapper: @(cd $(top_builddir)/utils ; $(MAKE) rapper$(EXEEXT)) build-rdfdiff: @(cd $(top_builddir)/utils ; $(MAKE) rdfdiff$(EXEEXT)) check-local: check-rdf check-bad-rdf check-turtle-serialize \ check-turtle-serialize-syntax check-turtle-parse-ntriples \ check-turtle-serialize-rdf # check-warn-rdf check-rdf: build-rapper $(TEST_FILES) @result=0; \ $(ECHO) "Testing legal Turtle"; \ for test in $(TEST_FILES); do \ name=`basename $$test .ttl` ; \ baseuri=$(BASE_URI)$$test; \ $(ECHO) $(ECHO_N) "Checking $$test $(ECHO_C)"; \ $(top_builddir)/utils/rapper -q -i turtle -o ntriples $(srcdir)/$$test $$baseuri > $$name.res 2> $$name.err; \ status=$$?; \ if test $$status != 0 -a $$status != 2 ; then \ $(ECHO) "FAILED returned status $$status"; result=1; \ $(ECHO) $(top_builddir)/utils/rapper -q -i turtle -o ntriples $(srcdir)/$$test $$baseuri '>' $$name.res; \ cat $$name.err; \ elif cmp $(srcdir)/$$name.out $$name.res >/dev/null 2>&1; then \ if test $$status = 2 ; then \ $(ECHO) "ok with warnings"; grep Warning $$name.err; \ else \ $(ECHO) "ok"; \ fi; \ else \ $(ECHO) "FAILED"; result=1; \ $(ECHO) $(top_builddir)/utils/rapper -q -i turtle -o ntriples $(srcdir)/$$test $$baseuri '>' $$name.res; \ cat $$name.err; \ diff $(srcdir)/$$name.out $$name.res; \ fi; \ rm -f $$name.res $$name.err; \ done; \ exit $$result check-bad-rdf: build-rapper $(TEST_BAD_FILES) @set +e; result=0; \ $(ECHO) "Testing bad Turtle fails"; \ for test in $(TEST_BAD_FILES); do \ name=`basename $$test .ttl` ; \ baseuri=$(BASE_URI)$$test; \ $(ECHO) $(ECHO_N) "Checking $$test $(ECHO_C)"; \ $(top_builddir)/utils/rapper -q -i turtle -o ntriples file:$(srcdir)/$$test $$baseuri > $$name.res 2> $$name.err; \ status=$$?; \ if test $$status -eq 1 ; then \ $(ECHO) "ok"; \ elif test $$status -eq 2 ; then \ $(ECHO) "FAILED - parsing succeeded with a warning"; result=1; \ $(ECHO) $(top_builddir)/utils/rapper -q -i turtle -o ntriples file:$(srcdir)/$$test $$baseuri '>' $$name.res; \ cat $$name.res; grep Warning $$name.err; \ elif test $$status -eq 0 ; then \ $(ECHO) "FAILED - parsing succeeded but should have failed"; result=1; \ $(ECHO) $(top_builddir)/utils/rapper -q -i turtle -o ntriples file:$(srcdir)/$$test $$baseuri '>' $$name.res; \ cat $$name.res; \ else \ $(ECHO) "FAILED - parsing failed with unknown status $$status"; result=1; \ $(ECHO) $(top_builddir)/utils/rapper -q -i turtle -o ntriples file:$(srcdir)/$$test $$baseuri '>' $$name.res; \ cat $$name.err; \ cat $$name.res; \ fi; \ rm -f $$name.res $$name.err ; \ done; \ set -e; exit $$result check-warn-rdf: build-rapper $(TEST_WARN_FILES) @set +e; result=0; \ $(ECHO) "Testing Turtle with warnings"; \ for test in $(TEST_WARN_FILES); do \ name=`basename $$test .ttl` ; \ baseuri=$(BASE_URI)$$test; \ $(ECHO) $(ECHO_N) "Checking $$test $(ECHO_C)"; \ $(top_builddir)/utils/rapper -q -i turtle -o ntriples file:$(srcdir)/$$test $$baseuri > $$name.res 2> $$name.err; \ status=$$?; \ if test $$status -eq 1 ; then \ $(ECHO) "FAILED - parsing failed when should have warned"; result=1; \ $(ECHO) $(top_builddir)/utils/rapper -q -i turtle -o ntriples file:$(srcdir)/$$test $$baseuri '>' $$name.res; \ cat $$name.res; grep Error $$name.err; \ elif test $$status -eq 2 ; then \ $(ECHO) "ok"; \ else \ $(ECHO) "FAILED - parsing failed with unknown status $$status"; result=1; \ $(ECHO) $(top_builddir)/utils/rapper -q -i turtle -o ntriples file:$(srcdir)/$$test $$baseuri '>' $$name.res; \ cat $$name.err; \ cat $$name.res; \ fi; \ rm -f $$name.res $$name.err ; \ done; \ set -e; exit $$result check-turtle-serialize: build-rdfdiff build-rapper $(TEST_FILES) @set +e; result=0; \ $(ECHO) "Testing turtle serialization with legal turtle"; \ for test in $(TEST_FILES); do \ name=`basename $$test .ttl` ; \ if test $$name = rdf-schema; then \ baseuri=$(RDF_NS_URI); \ elif test $$name = rdfs-namespace; then \ baseuri=$(RDFS_NS_URI); \ else \ baseuri=$(BASE_URI)$$test; \ fi; \ $(ECHO) $(ECHO_N) "Checking $$test $(ECHO_C)"; \ $(top_builddir)/utils/rapper -q -i turtle -o turtle $(srcdir)/$$test $$baseuri > $$name-turtle.ttl 2> $$name.err; \ status1=$$?; \ $(top_builddir)/utils/rdfdiff -f turtle -u $$baseuri -t turtle $(srcdir)/$$test $$name-turtle.ttl > $$name.res 2> $$name.err; \ status2=$$?; \ if test $$status1 = 0 -a $$status2 = 0; then \ $(ECHO) "ok"; \ else \ $(ECHO) "FAILED"; result=1; \ $(ECHO) $(top_builddir)/utils/rapper -q -i turtle -o turtle $(srcdir)/$$test $$baseuri '>' $$name-turtle.ttl; \ $(ECHO) $(top_builddir)/utils/rdfdiff -f turtle -u $$baseuri -t turtle $(srcdir)/$$test $$name-turtle.ttl '>' $$name.res; \ cat $$name-turtle.ttl; cat $$name.err; \ fi; \ rm -f $$name-turtle.ttl $$name.res $$name.err; \ done; \ set -e; exit $$result check-turtle-serialize-syntax: build-rapper $(TEST_SERIALIZE_FILES) @set +e; result=0; \ $(ECHO) "Testing turtle exact serialization output"; \ for test in $(TEST_SERIALIZE_FILES); do \ name=`basename $$test .ttl` ; \ if test $$name = rdf-schema; then \ baseuri=$(RDF_NS_URI); \ elif test $$name = rdfs-namespace; then \ baseuri=$(RDFS_NS_URI); \ elif test $$name = test-31 -o $$name = test-32; then \ baseuri=-; \ else \ baseuri=$(BASE_URI)$$test; \ fi; \ $(ECHO) $(ECHO_N) "Checking $$test $(ECHO_C)"; \ $(top_builddir)/utils/rapper -q -i turtle -o turtle $(srcdir)/$$test $$baseuri > $$name-turtle.ttl 2> $$name.err; \ cmp -s $(srcdir)/$$name-out.ttl $$name-turtle.ttl; \ status=$$?; \ if test $$status = 0; then \ $(ECHO) "ok"; \ else \ $(ECHO) "FAILED"; result=1; \ $(ECHO) $(top_builddir)/utils/rapper -q -i turtle -o turtle $(srcdir)/$$test $$baseuri '>' $$name-turtle.ttl; \ cat $$name.err; \ diff -a -u $(srcdir)/$$name-out.ttl $$name-turtle.ttl; \ fi; \ rm -f $$name-turtle.ttl $$name.err; \ done; \ set -e; exit $$result check-turtle-parse-ntriples: build-rapper @set +e; result=0; \ $(ECHO) "Testing Turtle parsing with N-Triples tests"; \ NT_TEST_FILES=`unset MAKELEVEL MAKEFLAGS; cd $(NTRIPLES_DIR) && $(MAKE) print-nt-test-files | sed -e 's,^, ,' -e 's, ,$(NTRIPLES_DIR)/,g'`; \ for test in $$NT_TEST_FILES; do \ name=`basename $$test .nt` ; \ baseuri=-; \ $(ECHO) $(ECHO_N) "Checking $$test $(ECHO_C)"; \ $(top_builddir)/utils/rapper -q -i turtle -o ntriples -n file:$(srcdir)/$$test $$baseuri > $$name.res 2> $$name.err; \ test_expected=$(srcdir)/$(NTRIPLES_DIR)/$$name.out; \ if cmp $$test_expected $$name.res >/dev/null 2>&1; then \ $(ECHO) "ok"; \ else \ $(ECHO) "FAILED"; result=1; \ $(ECHO) $(top_builddir)/utils/rapper -q -i turtle -o ntriples -n file:$(srcdir)/$$test $$baseuri '>' $$name.res; \ cat $$name.err; \ diff $$test_expected $$name.res; \ fi; \ rm -f $$name.res $$name.err; \ done; \ set -e; exit $$result check-turtle-serialize-rdf: build-rdfdiff build-rapper @set +e; result=0; \ RDF_TEST_FILES=`unset MAKELEVEL MAKEFLAGS; cd $(RDFXML_DIR) && $(MAKE) print-rdf-test-files | sed -e 's,^, ,' -e 's, ,$(RDFXML_DIR)/,g'`; \ $(ECHO) "Testing turtle serialization with legal rdf/xml"; \ for test in $$RDF_TEST_FILES $(TURTLE_SERIALIZE_RDF_FILES); do \ name=`basename $$test .rdf` ; \ baseuri=-; \ $(ECHO) $(ECHO_N) "Checking $$test $(ECHO_C)"; \ $(top_builddir)/utils/rapper -q -o turtle $(srcdir)/$$test $$baseuri > $$name-turtle.ttl 2> $$name.err; \ status1=$$?; \ if test $$test = "$(RDFXML_DIR)/ex-38.rdf"; then \ diff $(srcdir)/ex-38-turtle.out $$name-turtle.ttl > $$name.res 2> $$name.err; \ status2=$$?; \ else \ $(top_builddir)/utils/rdfdiff -t turtle $(srcdir)/$$test $$name-turtle.ttl > $$name.res 2> $$name.err; \ status2=$$?; \ fi; \ if test $$status1 = 0 -a $$status2 = 0; then \ $(ECHO) "ok"; \ else \ $(ECHO) "FAILED"; result=1; \ $(ECHO) $(top_builddir)/utils/rapper -q -o turtle $(srcdir)/$$test $$baseuri '>' $$name-turtle.ttl; \ $(ECHO) $(top_builddir)/utils/rdfdiff -t turtle $(srcdir)/$$test $$name-turtle.ttl '>' $$name.res; \ cat $$name.err; \ fi; \ rm -f $$name-turtle.ttl $$name.res $$name.err; \ done; \ set -e; exit $$result @MAINTAINER_MODE_TRUE@zip: tests.zip @MAINTAINER_MODE_TRUE@tests.zip: $(ALL_TEST_FILES) @MAINTAINER_MODE_TRUE@ rm -f $@ @MAINTAINER_MODE_TRUE@ zip $@ $(ALL_TEST_FILES) # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: