# THIS FILE IS GENERATED AUTOMATICALLY FROM THE D-I PO MASTER FILES
# The master files can be found under packages/po/
#
# DO NOT MODIFY THIS FILE DIRECTLY: SUCH CHANGES WILL BE LOST
#
# translation of debian-installer_packages_po_sublevel1_da.po to
# Danish messages for debian-installer.
# This file is distributed under the same license as debian-installer.
# Mads Bille Lundby <lundbymads@gmail.com, 2009.
# Henrik Christian Grove <debian@3001.dk>, 2008.
# Jesper Dahl Nyerup <debian@jespernyerup.dk>, 2008.
# Jacob Sparre Andersen <sparre@nbi.dk>, 2008.
# Claus Hindsgaul <claus.hindsgaul@gmail.com>, 2004-2007.
# Reviewed 2007 by Niels Rasmussen
#
#
msgid ""
msgstr ""
"Project-Id-Version: debian-installer_packages_po_sublevel1_da\n"
"Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
"POT-Creation-Date: 2010-03-26 09:46+0000\n"
"PO-Revision-Date: 2009-09-21 13:27+0100\n"
"Last-Translator: Mads Lundby <lundbymads@gmail.com>\n"
"Language-Team: Danish\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"

#. Type: boolean
#. Description
#. :sl1:
#. Type: boolean
#. Description
#. :sl1:
#: ../grub-installer.templates:1001 ../grub-installer.templates:2001
msgid "Install the GRUB boot loader to the master boot record?"
msgstr "Installér opstartsindlæseren GRUB på opstartssporet?"

#. Type: boolean
#. Description
#. :sl1:
#: ../grub-installer.templates:1001
msgid ""
"The following other operating systems have been detected on this computer: "
"${OS_LIST}"
msgstr "Følgende andre styresystemer blev fundet på denne computer: ${OS_LIST}"

#. Type: boolean
#. Description
#. :sl1:
#: ../grub-installer.templates:1001
msgid ""
"If all of your operating systems are listed above, then it should be safe to "
"install the boot loader to the master boot record of your first hard drive. "
"When your computer boots, you will be able to choose to load one of these "
"operating systems or your new system."
msgstr ""
"Hvis alle dine styresystemer er nævnt herover, skulle det være sikkert at "
"installere opstartsindlæseren i din første harddisks opstartsspor (\"master "
"boot record\"). Når din computer starter op, vil du få mulighed for at vælge "
"mellem disse styresystemer samt dit nye system."

#. Type: boolean
#. Description
#. :sl1:
#: ../grub-installer.templates:2001
msgid ""
"It seems that this new installation is the only operating system on this "
"computer. If so, it should be safe to install the GRUB boot loader to the "
"master boot record of your first hard drive."
msgstr ""
"Det lader til at denne nye installation bliver det eneste styresystem på "
"computeren. Hvis det er tilfældet, skulle det være sikkert at installere "
"opstartsindlæseren i din første harddisks opstartsspor."

#. Type: boolean
#. Description
#. :sl1:
#: ../grub-installer.templates:2001
msgid ""
"Warning: If the installer failed to detect another operating system that is "
"present on your computer, modifying the master boot record will make that "
"operating system temporarily unbootable, though GRUB can be manually "
"configured later to boot it."
msgstr ""
"Advarsel: Hvis der er et andet styresystem på din computer, som "
"installationsprogrammet ikke opdagede, kan du risikere at dette system "
"bliver ude af stand til at starte, hvis du overskriver master boot record. "
"GRUB kan dog senere indstilles manuelt til at starte det op."

#. Type: boolean
#. Description
#. :sl3:
#: ../grub-installer.templates:3001
msgid "Install the GRUB boot loader to the Serial ATA RAID disk?"
msgstr "Installér opstartsindlæseren GRUB på en SATA-RAID-disk?"

#. Type: boolean
#. Description
#. :sl3:
#: ../grub-installer.templates:3001
msgid "Installation of GRUB on Serial ATA RAID is experimental."
msgstr "Installation af GRUB på SATA-RAID-diske er eksperimentel."

#. Type: boolean
#. Description
#. :sl3:
#: ../grub-installer.templates:3001
msgid ""
"GRUB is always installed to the master boot record (MBR) of the Serial ATA "
"RAID disk. It is also assumed that disk is listed as the first hard disk in "
"the boot order defined in the system's BIOS setup."
msgstr ""
"GRUB bliver altid installeret i MBR'en på SATA-RAID-disken. Det antages "
"også, at disken står som den første disk i startrækkefølgen i systemets BIOS-"
"opsætning."

#. Type: boolean
#. Description
#. :sl3:
#. Type: boolean
#. Description
#. :sl3:
#: ../grub-installer.templates:3001 ../grub-installer.templates:5001
msgid "The GRUB root device is: ${GRUBROOT}."
msgstr "GRUB-rod-enheden er: ${GRUBROOT}."

#. Type: error
#. Description
#. :sl3:
#. Type: error
#. Description
#. :sl3:
#. Type: error
#. Description
#. :sl2:
#: ../grub-installer.templates:4001 ../grub-installer.templates:6001
#: ../grub-installer.templates:14001
msgid "Unable to configure GRUB"
msgstr "Kunne ikke sætte GRUB op"

#. Type: error
#. Description
#. :sl3:
#: ../grub-installer.templates:4001
msgid "An error occurred while setting up GRUB for your Serial ATA RAID disk."
msgstr "Der opstod en fejl under opsætningen af GRUB til din SATA-RAID-disk."

#. Type: error
#. Description
#. :sl3:
#. Type: error
#. Description
#. :sl3:
#: ../grub-installer.templates:4001 ../grub-installer.templates:6001
msgid "The GRUB installation has been aborted."
msgstr "Installationen af GRUB blev afbrudt."

#. Type: boolean
#. Description
#. :sl3:
#: ../grub-installer.templates:5001
msgid "Install the GRUB boot loader to the multipath device?"
msgstr "Installér opstartsindlæseren GRUB på multipath-enheden?"

#. Type: boolean
#. Description
#. :sl3:
#: ../grub-installer.templates:5001
msgid "Installation of GRUB on multipath is experimental."
msgstr "Installation af GRUB på multipath-enheder er eksperimentel."

#. Type: boolean
#. Description
#. :sl3:
#: ../grub-installer.templates:5001
msgid ""
"GRUB is always installed to the master boot record (MBR) of the multipath "
"device. It is also assumed that the WWID of this device is selected as boot "
"device in the system's FibreChannel adapter BIOS."
msgstr ""
"GRUB bliver altid installeret i MBR'en på multipath-enheden. Det antages "
"også at enhedens WWID er valgt som opstartsenhed i systemets FibreChannel-"
"adapters BIOS."

#. Type: error
#. Description
#. :sl3:
#: ../grub-installer.templates:6001
msgid "An error occurred while setting up GRUB for the multipath device."
msgstr "Der opstod en fejl under opsætningen af GRUB til din multipath-enhed."

#. Type: string
#. Description
#. :sl2:
#: ../grub-installer.templates:7001
msgid "Device for boot loader installation:"
msgstr "Enhed hvorpå opstartsindlæseren skal installeres:"

#. Type: string
#. Description
#. :sl2:
#: ../grub-installer.templates:7001
msgid ""
"You need to make the newly installed system bootable, by installing the GRUB "
"boot loader on a bootable device. The usual way to do this is to install "
"GRUB on the master boot record of your first hard drive. If you prefer, you "
"can install GRUB elsewhere on the drive, or to another drive, or even to a "
"floppy."
msgstr ""
"Du skal sætte dit nyinstallerede system i stand til at starte op, ved at "
"installere opstartsindlæseren GRUB på en enhed som computeren kan starte op "
"fra. Det gøres normalt ved at installere GRUB på din første harddisks "
"opstartsspor (\"master boot record\"). Hvis du foretrækker det, kan du "
"installere GRUB andre steder på drevet, på et andet drev eller sågar på en "
"diskette."

#. Type: string
#. Description
#. :sl2:
#: ../grub-installer.templates:7001
#, fuzzy
#| msgid ""
#| "The device can be specified using GRUB's \"(hdn,m)\" notation, or as a "
#| "device in /dev. Below are some examples:\n"
#| " - \"(hd0)\" or \"/dev/hda\" will install GRUB to the master boot record\n"
#| "   of your first hard drive (IDE);\n"
#| " - \"(hd0,1)\" or \"/dev/hda2\" will use the second partition of your\n"
#| "   first IDE drive;\n"
#| " - \"(hd2,4)\" or \"/dev/sdc5\" will use the first extended partition of\n"
#| "   your third drive (SCSI here);\n"
#| " - \"(fd0)\" or \"/dev/fd0\" will install GRUB to a floppy."
msgid ""
"The device should be specified as a device in /dev. Below are some "
"examples:\n"
" - \"/dev/sda\" will install GRUB to the master boot record of your first\n"
"   hard drive;\n"
" - \"/dev/sda2\" will use the second partition of your first hard drive;\n"
" - \"/dev/sdc5\" will use the first extended partition of your third hard\n"
"   drive;\n"
" - \"/dev/fd0\" will install GRUB to a floppy."
msgstr ""
"Enheden kan angives i GRUBs \"(hdn,m)\"-notation eller som en enhed i /dev. "
"Herunder vises nogle eksempler:\n"
" - \"(hd0)\" eller \"/dev/hda\" installerer GRUB i \"master boot record\" "
"på\n"
"   din første harddisk (IDE);\n"
" - \"(hd0,1)\" eller \"/dev/hda2\" benytter den anden partition på dit "
"første\n"
"   IDE-drev;\n"
" - \"(hd2,4)\" eller \"/dev/sdc5\" benytter den første udvidede partition på "
"dit\n"
"   tredje SCSI-drev;\n"
" - \"(fd0)\" eller \"/dev/fd0\" installerer GRUB på en diskette."

#. Type: password
#. Description
#. :sl2:
#: ../grub-installer.templates:8001
msgid "GRUB password:"
msgstr "GRUB-adgangskode:"

#. Type: password
#. Description
#. :sl2:
#: ../grub-installer.templates:8001
msgid ""
"The GRUB boot loader offers many powerful interactive features, which could "
"be used to compromise your system if unauthorized users have access to the "
"machine when it is starting up. To defend against this, you may choose a "
"password which will be required before editing menu entries or entering the "
"GRUB command-line interface. By default, any user will still be able to "
"start any menu entry without entering the password."
msgstr ""
"Opstartsindlæseren GRUB indeholder mange kraftfulde interaktive funktioner, "
"som vil kunne bruges til at bryde ind i dit system, hvis uautoriserede "
"brugere har adgang til maskinen mens den starter op. For at gardere dig mod "
"dette, kan du vælge en adgangskode, som skal angives før man kan redigere "
"menupunkter eller få adgang til GRUBs kommandolinje. Som udgangspunkt kan "
"enhver bruger stadig vælge alle menupunkterne uden at skulle angive en "
"adgangskode."

#. Type: password
#. Description
#. :sl2:
#: ../grub-installer.templates:8001
msgid "If you do not wish to set a GRUB password, leave this field blank."
msgstr ""
"Hvis du ikke ønsker at have en GRUB-adgangskode, så undlad at udfylde feltet."

#. Type: password
#. Description
#. :sl2:
#: ../grub-installer.templates:9001
msgid "Re-enter password to verify:"
msgstr "Angiv adgangskoden igen for at tjekke:"

#. Type: password
#. Description
#. :sl2:
#: ../grub-installer.templates:9001
msgid ""
"Please enter the same GRUB password again to verify that you have typed it "
"correctly."
msgstr ""
"Angiv den samme GRUB-adgangskode igen for at sikre, at du har indtastet den "
"korrekt."

#. Type: error
#. Description
#. :sl2:
#: ../grub-installer.templates:10001
msgid "Password input error"
msgstr "Adgangskode-indtastningsfejl"

#. Type: error
#. Description
#. :sl2:
#: ../grub-installer.templates:10001
msgid "The two passwords you entered were not the same. Please try again."
msgstr "De to adgangskoder, du indtastede, var ikke ens. Prøv igen."

#. Type: error
#. Description
#. :sl2:
#: ../grub-installer.templates:12001
msgid "GRUB installation failed"
msgstr "Installationen af GRUB mislykkedes"

#. Type: error
#. Description
#. :sl2:
#: ../grub-installer.templates:12001
msgid ""
"The '${GRUB}' package failed to install into /target/. Without the GRUB boot "
"loader, the installed system will not boot."
msgstr ""
"Pakken \"${GRUB}\" kunne ikke installeres på \"/target/\". Uden GRUB-"
"opstartsprogrammet, kan det installerede system ikke starte."

#. Type: error
#. Description
#. :sl2:
#: ../grub-installer.templates:13001
msgid "Unable to install GRUB in ${BOOTDEV}"
msgstr "Kunne ikke installere GRUB i ${BOOTDEV}"

#. Type: error
#. Description
#. :sl2:
#: ../grub-installer.templates:13001
msgid "Executing 'grub-install ${BOOTDEV}' failed."
msgstr "Kørsel af 'grub-install ${BOOTDEV}' mislykkedes."

#. Type: error
#. Description
#. :sl2:
#. Type: error
#. Description
#. :sl2:
#: ../grub-installer.templates:13001 ../grub-installer.templates:14001
msgid "This is a fatal error."
msgstr "Dette er en fatal fejl."

#. Type: error
#. Description
#. :sl2:
#: ../grub-installer.templates:14001
msgid "Executing 'update-grub' failed."
msgstr "Kørsel af 'update-grub' mislykkedes."

#. Type: text
#. Description
#. :sl1:
#: ../grub-installer.templates:17001
msgid "Installing GRUB boot loader"
msgstr "Installerer GRUB-opstartsindlæseren"

#. Type: text
#. Description
#. :sl1:
#: ../grub-installer.templates:18001
msgid "Looking for other operating systems..."
msgstr "Leder efter andre styresystemer..."

#. Type: text
#. Description
#. :sl1:
#: ../grub-installer.templates:19001
msgid "Installing the '${GRUB}' package..."
msgstr "Installerer \"${GRUB}\"-pakken..."

#. Type: text
#. Description
#. :sl1:
#: ../grub-installer.templates:20001
msgid "Determining GRUB boot device..."
msgstr "Udpeger GRUB-opstartsenhed..."

#. Type: text
#. Description
#. :sl1:
#: ../grub-installer.templates:21001
msgid "Running \"grub-install ${BOOTDEV}\"..."
msgstr "Kører \"grub-install ${BOOTDEV}\"..."

#. Type: text
#. Description
#. :sl1:
#: ../grub-installer.templates:22001
msgid "Running \"update-grub\"..."
msgstr "Kører \"update-grub\"..."

#. Type: text
#. Description
#. :sl1:
#: ../grub-installer.templates:23001
msgid "Updating /etc/kernel-img.conf..."
msgstr "Opdaterer /etc/kernel-img.conf..."

#. Type: text
#. Description
#. Main menu item
#. :sl1:
#: ../grub-installer.templates:24001
msgid "Install the GRUB boot loader on a hard disk"
msgstr "Installér opstartsindlæseren GRUB på en harddisk"

#. Type: text
#. Description
#. Rescue menu item
#. :sl2:
#: ../grub-installer.templates:25001
msgid "Reinstall GRUB boot loader"
msgstr "Geninstallér GRUB-opstartsindlæseren"