# THIS FILE IS GENERATED AUTOMATICALLY FROM THE D-I PO MASTER FILES
# The master files can be found under packages/po/
#
# DO NOT MODIFY THIS FILE DIRECTLY: SUCH CHANGES WILL BE LOST
#
# translation of debian-installer_packages_po_sublevel1_da.po to
# Danish messages for debian-installer.
# This file is distributed under the same license as debian-installer.
# Henrik Christian Grove <debian@3001.dk>, 2008.
# Jesper Dahl Nyerup <debian@jespernyerup.dk>, 2008.
# Jacob Sparre Andersen <sparre@nbi.dk>, 2008.
# Claus Hindsgaul <claus.hindsgaul@gmail.com>, 2004-2007.
# Reviewed 2007 by Niels Rasmussen
#
#
msgid ""
msgstr ""
"Project-Id-Version: debian-installer_packages_po_sublevel1_da\n"
"Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
"POT-Creation-Date: 2008-01-26 07:33+0000\n"
"PO-Revision-Date: 2008-09-19 16:35+0200\n"
"Last-Translator: \n"
"Language-Team:  <en@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n != 1);X-Generator: KBabel 1.11.4\n"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:1001
msgid "No partitions found"
msgstr "Fandt ingen partitioner"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:1001
msgid ""
"No partitions were found in your system. You may need to partition your hard "
"drives or load additional kernel modules."
msgstr ""
"Fandt ingen partitioner på dit system. Du er muligvis nødt til at "
"partitionere dine harddiske eller indlæse yderligere kernemoduler."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:2001
msgid "No file systems found"
msgstr "Fandt ingen filsystemer"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:2001
msgid ""
"No usable file systems were found. You may need to load additional kernel "
"modules."
msgstr ""
"Der blev ikke fundet nogen brugbare filsystemer. Du er muligvis nødt til at "
"indlæse yderligere kernemoduler."

#. Type: select
#. Choices
#. :sl5:
#: ../partconf.templates:3001
msgid "Finish"
msgstr "Afslut"

#. Type: select
#. Choices
#. :sl5:
#: ../partconf.templates:3001
msgid "Abort"
msgstr "Afbryd"

#. Type: select
#. Description
#: ../partconf.templates:3002
msgid "Select a partition"
msgstr "Vælg en partition"

#. Type: select
#. Description
#: ../partconf.templates:3002
msgid ""
"These are the partitions that were detected in your system. Please select a "
"partition to configure. No actual changes will be made until you select "
"\"Finish\". If you select \"Abort\", no changes will be made."
msgstr ""
"Følgende partitioner blev fundet på dit system. Vælg en partition, der skal "
"sættes op. Der vil ikke blive foretaget nogen ændringer, før du vælger "
"\"Afslut\". Hvis du vælger \"Afbryd\", vil der ikke blive foretaget "
"ændringer."

#. Type: select
#. Description
#: ../partconf.templates:3002
msgid ""
"The information shown is, in order: device name, size, file system, and "
"mount point."
msgstr ""
"De viste oplysninger er: enhedsnavn, størrelse, filsystem og monteringspunkt."

#. Type: select
#. Choices
#. :sl5:
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#: ../partconf.templates:4001
msgid "Leave the file system intact"
msgstr "Efterlad filsystemet intakt"

#. Type: select
#. Choices
#. :sl5:
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. Type: select
#. Choices
#. :sl5:
#. Note to translators : Please keep your translations of each choice
#. (separated by commas)
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#: ../partconf.templates:4001 ../partconf.templates:5001
msgid "Create swap space"
msgstr "Opret swapområde"

#. Type: select
#. Description
#. :sl5:
#. Type: select
#. Description
#. :sl5:
#: ../partconf.templates:4002 ../partconf.templates:5002
msgid "Action on ${PARTITION}:"
msgstr "Handling på ${PARTITION}:"

#. Type: select
#. Description
#. :sl5:
#: ../partconf.templates:4002
msgid ""
"This partition seems to already have a file system (${FSTYPE}). You can "
"choose to leave this file system intact, create a new file system, or create "
"swap space."
msgstr ""
"Partitionen lader allerede til at indeholde et filsystem (${FSTYPE}). Du kan "
"vælge at efterlade det intakt, oprette et filsystem eller et swapområde."

#. Type: select
#. Description
#. :sl5:
#: ../partconf.templates:5002
msgid ""
"This partition does not seem to have a file system. You can create a file "
"system or swap space on it."
msgstr ""
"Denne partition lader ikke til at have et filsystem. Du kan oprette et "
"filsystem eller et swapområde på den."

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of each choice
#. (separated by commas)
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. :sl5:
#. "it" is a partition
#: ../partconf.templates:6001
msgid "Don't mount it"
msgstr "Montér det ikke"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of each choice
#. (separated by commas)
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. :sl5:
#. What's to be "entered manually" is a mount point
#: ../partconf.templates:6001
msgid "Enter manually"
msgstr "Angiv manuelt"

#. Type: select
#. Description
#. :sl5:
#. Type: string
#. Description
#. :sl5:
#: ../partconf.templates:6002 ../partconf.templates:7001
msgid "Mount point for ${PARTITION}:"
msgstr "Monteringspunkt for ${PARTITION}:"

#. Type: select
#. Description
#. :sl5:
#: ../partconf.templates:6002
msgid ""
"When a partition is mounted, it is available to the users of the system. You "
"always need a root (\"/\") partition, and it's often good to have a separate "
"partition for /home."
msgstr ""
"Når en partition er monteret, er den tilgængelig for brugerne på systemet. "
"Du skal altid have en rodpartition (\"/\"), og det er ofte en god idé at "
"have en separat partition til /home."

#. Type: string
#. Description
#. :sl5:
#: ../partconf.templates:7001
msgid "Please enter where the partition should be mounted."
msgstr "Angiv hvor partitionen skal monteres."

#. Type: boolean
#. Description
#. :sl5:
#: ../partconf.templates:8001
msgid "Do you want to unmount the partitions so you can make changes?"
msgstr "Ønsker du at afmontere partitionerne, så du kan udføre ændringer?"

#. Type: boolean
#. Description
#. :sl5:
#: ../partconf.templates:8001
msgid ""
"Since the partitions have already been mounted, you cannot do any changes."
msgstr ""
"Da partitionerne allerede er monterede, kan du ikke udføre nogen ændringer."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:9001
msgid "Failed to unmount partitions"
msgstr "Kunne ikke afmontere partitionerne"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:9001
msgid "An unexpected error occurred while unmounting the partitions."
msgstr "Der opstod en uventet fejl under afmonteringen af partitionerne."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:9001
msgid "The partition configuration process has been aborted."
msgstr "Partitioneringen blev afbrudt."

#. Type: text
#. Description
#. :sl5:
#: ../partconf.templates:10001
#, no-c-format
msgid "Create %s file system"
msgstr "Opret %s-filsystem"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:11001
msgid "No root partition (/)"
msgstr "Ingen rodpartition (/)"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:11001
msgid ""
"You need a root partition. Please assign a partition to the root mount point "
"before continuing."
msgstr ""
"Du skal have en rodpartition. Udpeg en partition til at være monteringspunkt "
"for roden, før du fortsætter."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:12001
msgid "Partition assigned to ${MOUNT}"
msgstr "Partition udpeget til ${MOUNT}"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:12001
msgid "Mounting a partition on ${MOUNT} makes no sense. Please change this."
msgstr ""
"Det giver ingen mening at montere en partition på ${MOUNT}. Ret det venligst."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:13001
msgid "Several partitions assigned to ${MOUNT}"
msgstr "Flere partitioner er blevet tildelt ${MOUNT}"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:13001
msgid ""
"You cannot assign several partitions to the same mount point. Please change "
"all but one of them."
msgstr ""
"Du kan ikke udpege flere partitioner til samme monteringspunkt. Ret venligst "
"alle undtagen én."

#. Type: boolean
#. Description
#. :sl5:
#: ../partconf.templates:14001
msgid "Ready to create file systems and mount partitions?"
msgstr "Klar til at oprette filsystemer og montere partitioner?"

#. Type: boolean
#. Description
#. :sl5:
#: ../partconf.templates:14001
msgid "File systems will be created and partitions mounted."
msgstr "Filsystemer vil blive oprettet og partitioner monteret."

#. Type: boolean
#. Description
#. :sl5:
#: ../partconf.templates:14001
msgid ""
"WARNING: This will destroy all data on the partitions you have assigned file "
"systems to."
msgstr ""
"ADVARSEL: Dette vil ødelægge alle data på de partitioner, du har udpeget "
"filsystemer til."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:15001
msgid "Failed to create swap space on ${PARTITION}"
msgstr "Kunne ikke oprette swapområde på ${PARTITION}"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:15001
msgid "An error occurred when the swap space was created on ${PARTITION}."
msgstr "Der opstod en fejl, da swapområdet blev oprettet på ${PARTITION}."

#. Type: error
#. Description
#. :sl5:
#. Type: error
#. Description
#. :sl5:
#. Type: error
#. Description
#. :sl5:
#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:15001 ../partconf.templates:16001
#: ../partconf.templates:17001 ../partconf.templates:18001
msgid ""
"Please check the error log on the third console or /var/log/messages for "
"more information."
msgstr ""
"Tjek fejlloggen på den tredje konsol eller /var/log/messages for flere "
"oplysninger."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:16001
msgid "Failed to activate the swap space on ${PARTITION}"
msgstr "Kunne ikke aktivere swapområdet på ${PARTITION}"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:16001
msgid "An error occurred when the swap space on ${PARTITION} was activated."
msgstr "Der opstod en fejl, da swapområdet på ${PARTITION} blev aktiveret."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:17001
msgid "Failed to create ${FS} file system on ${PARTITION}"
msgstr "Kunne ikke oprette ${FS}-filsystem på ${PARTITION}"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:17001
msgid ""
"An error occurred when the ${FS} file system was created on ${PARTITION}."
msgstr ""
"Der opstod en fejl, da ${FS}-filsystemet blev oprettet på ${PARTITION}."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:18001
msgid "Failed to mount ${PARTITION} on ${MOUNT}"
msgstr "Kunne ikke montere ${PARTITION} på ${MOUNT}"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:18001
msgid "An error occurred when ${PARTITION} was mounted on ${MOUNT}."
msgstr "Der opstod en fejl, da ${PARTITION} blev monteret på ${MOUNT}."

#. Type: text
#. Description
#. Main menu item
#. :sl5:
#: ../partconf.templates:19001
msgid "Configure and mount partitions"
msgstr "Sæt partitioner op og montér dem"