# THIS FILE IS AUTOMATICALLY GENERATED FROM THE MASTER FILE
# packages/po/zh_CN.po
#
# DO NOT MODIFY IT DIRECTLY : SUCH CHANGES WILL BE LOST
# 
# Simplified Chinese translation for Debian Installer.
#
# Copyright (C) 2003-2007 Software in the Public Interest, Inc.
# This file is distributed under the same license as debian-installer.
#
# Translated by bbbush (2004), Carlos Z.F. Liu (2004,2005,2006) and
# Ming Hua (2005,2006,2007).
#
msgid ""
msgstr ""
"Project-Id-Version: debian-installer\n"
"Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
"POT-Creation-Date: 2008-01-26 07:33+0000\n"
"PO-Revision-Date: 2007-07-01 01:02-0500\n"
"Last-Translator: Ming Hua <minghua-guest@users.alioth.debian.org>\n"
"Language-Team: Debian Chinese [GB] <debian-chinese-gb@lists.debian.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:1001
msgid "No partitions found"
msgstr "未找到分区"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:1001
msgid ""
"No partitions were found in your system. You may need to partition your hard "
"drives or load additional kernel modules."
msgstr "系统中没有找到分区。您需要将硬盘分区或者加载附加的内核模块。"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:2001
msgid "No file systems found"
msgstr "没有找到文件系统"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:2001
msgid ""
"No usable file systems were found. You may need to load additional kernel "
"modules."
msgstr "没有找到可用的文件系统。您需要加载附加的内核模块。"

#. Type: select
#. Choices
#. :sl5:
#: ../partconf.templates:3001
msgid "Finish"
msgstr "完成"

#. Type: select
#. Choices
#. :sl5:
#: ../partconf.templates:3001
msgid "Abort"
msgstr "中止"

#. Type: select
#. Description
#: ../partconf.templates:3002
msgid "Select a partition"
msgstr "选择一个分区"

#. Type: select
#. Description
#: ../partconf.templates:3002
msgid ""
"These are the partitions that were detected in your system. Please select a "
"partition to configure. No actual changes will be made until you select "
"\"Finish\". If you select \"Abort\", no changes will be made."
msgstr ""
"这是系统中已被探测到的分区。请选择要配置的分区。在您选择“结束”之前任何改变都"
"不会被真正写入。如果选择“中止”，也不会做任何改变。"

#. Type: select
#. Description
#: ../partconf.templates:3002
msgid ""
"The information shown is, in order: device name, size, file system, and "
"mount point."
msgstr "显示的信息依次是：设备名，大小，文件系统，挂载点。"

#. Type: select
#. Choices
#. :sl5:
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#: ../partconf.templates:4001
msgid "Leave the file system intact"
msgstr "保持文件系统不变"

#. Type: select
#. Choices
#. :sl5:
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. Type: select
#. Choices
#. :sl5:
#. Note to translators : Please keep your translations of each choice
#. (separated by commas)
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#: ../partconf.templates:4001 ../partconf.templates:5001
msgid "Create swap space"
msgstr "创建交换空间"

#. Type: select
#. Description
#. :sl5:
#. Type: select
#. Description
#. :sl5:
#: ../partconf.templates:4002 ../partconf.templates:5002
msgid "Action on ${PARTITION}:"
msgstr "对 ${PARTITION} 的操作："

#. Type: select
#. Description
#. :sl5:
#: ../partconf.templates:4002
msgid ""
"This partition seems to already have a file system (${FSTYPE}). You can "
"choose to leave this file system intact, create a new file system, or create "
"swap space."
msgstr ""
"此分区中已包含文件系统 (${FSTYPE})。您可以选择保持不变，或者创建文件系统或交"
"换空间。"

#. Type: select
#. Description
#. :sl5:
#: ../partconf.templates:5002
msgid ""
"This partition does not seem to have a file system. You can create a file "
"system or swap space on it."
msgstr "分区上没有文件系统。可以在其上创建文件系统或者交换空间。"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of each choice
#. (separated by commas)
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. :sl5:
#. "it" is a partition
#: ../partconf.templates:6001
msgid "Don't mount it"
msgstr "不挂载"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of each choice
#. (separated by commas)
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. :sl5:
#. What's to be "entered manually" is a mount point
#: ../partconf.templates:6001
msgid "Enter manually"
msgstr "手动输入"

#. Type: select
#. Description
#. :sl5:
#. Type: string
#. Description
#. :sl5:
#: ../partconf.templates:6002 ../partconf.templates:7001
msgid "Mount point for ${PARTITION}:"
msgstr "${PARTITION} 的挂载点："

#. Type: select
#. Description
#. :sl5:
#: ../partconf.templates:6002
msgid ""
"When a partition is mounted, it is available to the users of the system. You "
"always need a root (\"/\") partition, and it's often good to have a separate "
"partition for /home."
msgstr ""
"只有分区被挂载，系统中的用户才可以使用它。系统中必须有一个根分区 (“/”)，并且"
"最好将 /home 划分为单独的分区。"

#. Type: string
#. Description
#. :sl5:
#: ../partconf.templates:7001
msgid "Please enter where the partition should be mounted."
msgstr "请输入分区应当挂载的位置。"

#. Type: boolean
#. Description
#. :sl5:
#: ../partconf.templates:8001
msgid "Do you want to unmount the partitions so you can make changes?"
msgstr "要暂时卸载分区吗？这样您才能改变它。"

#. Type: boolean
#. Description
#. :sl5:
#: ../partconf.templates:8001
msgid ""
"Since the partitions have already been mounted, you cannot do any changes."
msgstr "分区已被挂载，不能做任何修改。"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:9001
msgid "Failed to unmount partitions"
msgstr "无法卸载分区"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:9001
msgid "An unexpected error occurred while unmounting the partitions."
msgstr "在卸载分区时发生一个预料之外的错误。"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:9001
msgid "The partition configuration process has been aborted."
msgstr "配置分区过程已被中止。"

#. Type: text
#. Description
#. :sl5:
#: ../partconf.templates:10001
#, no-c-format
msgid "Create %s file system"
msgstr "创建 %s 文件系统"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:11001
msgid "No root partition (/)"
msgstr "没有根分区 (/)"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:11001
msgid ""
"You need a root partition. Please assign a partition to the root mount point "
"before continuing."
msgstr "必须有一个根分区。请将一个分区分配为根分区，然后继续。"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:12001
msgid "Partition assigned to ${MOUNT}"
msgstr "分区被挂载到 ${MOUNT}"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:12001
msgid "Mounting a partition on ${MOUNT} makes no sense. Please change this."
msgstr "将分区挂载到 ${MOUNT} 没有意义。请修改。"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:13001
msgid "Several partitions assigned to ${MOUNT}"
msgstr "多个分区被分配到了 ${MOUNT}"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:13001
msgid ""
"You cannot assign several partitions to the same mount point. Please change "
"all but one of them."
msgstr "不能将多个分区分配到同一个挂载点。请修改它们，只留下一个。"

#. Type: boolean
#. Description
#. :sl5:
#: ../partconf.templates:14001
msgid "Ready to create file systems and mount partitions?"
msgstr "准备好创建文件系统并挂载分区了吗？"

#. Type: boolean
#. Description
#. :sl5:
#: ../partconf.templates:14001
msgid "File systems will be created and partitions mounted."
msgstr "将创建文件系统，并挂载分区。"

#. Type: boolean
#. Description
#. :sl5:
#: ../partconf.templates:14001
msgid ""
"WARNING: This will destroy all data on the partitions you have assigned file "
"systems to."
msgstr "警告：这将摧毁被您分配了文件系统的分区上的所有数据。"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:15001
msgid "Failed to create swap space on ${PARTITION}"
msgstr "无法在 ${PARTITION} 上创建交换空间"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:15001
msgid "An error occurred when the swap space was created on ${PARTITION}."
msgstr "在 ${PARTITION} 上创建交换空间时发生错误。"

#. Type: error
#. Description
#. :sl5:
#. Type: error
#. Description
#. :sl5:
#. Type: error
#. Description
#. :sl5:
#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:15001 ../partconf.templates:16001
#: ../partconf.templates:17001 ../partconf.templates:18001
msgid ""
"Please check the error log on the third console or /var/log/messages for "
"more information."
msgstr "请检查 /var/log/messages 或第三个控制台中的错误日志来获取详细信息。"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:16001
msgid "Failed to activate the swap space on ${PARTITION}"
msgstr "无法激活 ${PARTITION} 上的交换空间"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:16001
msgid "An error occurred when the swap space on ${PARTITION} was activated."
msgstr "在激活 ${PARTITION} 上的交换空间时发生错误。"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:17001
msgid "Failed to create ${FS} file system on ${PARTITION}"
msgstr "无法在 ${PARTITION} 上创建 ${FS} 文件系统"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:17001
msgid ""
"An error occurred when the ${FS} file system was created on ${PARTITION}."
msgstr "在 ${PARTITION} 上创建 ${FS} 文件系统时发生错误。"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:18001
msgid "Failed to mount ${PARTITION} on ${MOUNT}"
msgstr "无法将 ${PARTITION} 挂载到 ${MOUNT}"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:18001
msgid "An error occurred when ${PARTITION} was mounted on ${MOUNT}."
msgstr "将 ${PARTITION} 挂载到 ${MOUNT} 时发生错误。"

#. Type: text
#. Description
#. Main menu item
#. :sl5:
#: ../partconf.templates:19001
msgid "Configure and mount partitions"
msgstr "配置并加载分区"