# THIS FILE IS GENERATED AUTOMATICALLY FROM THE D-I PO MASTER FILES
# The master files can be found under packages/po/
#
# DO NOT MODIFY THIS FILE DIRECTLY: SUCH CHANGES WILL BE LOST
#
# translation of debian-installer_packages_po_sublevel1_da.po to
# Danish messages for debian-installer.
# This file is distributed under the same license as debian-installer.
# Henrik Christian Grove <debian@3001.dk>, 2008.
# Jesper Dahl Nyerup <debian@jespernyerup.dk>, 2008.
# Jacob Sparre Andersen <sparre@nbi.dk>, 2008.
# Claus Hindsgaul <claus.hindsgaul@gmail.com>, 2004-2007.
# Reviewed 2007 by Niels Rasmussen
#
#
msgid ""
msgstr ""
"Project-Id-Version: debian-installer_packages_po_sublevel1_da\n"
"Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
"POT-Creation-Date: 2009-03-17 22:51+0000\n"
"PO-Revision-Date: 2008-09-19 16:35+0200\n"
"Last-Translator: \n"
"Language-Team:  <en@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n != 1);X-Generator: KBabel 1.11.4\n"

#. Type: note
#. Description
#. :sl1:
#. Type: text
#. Description
#. :sl1:
#: ../partman-target.templates:1001 ../partman-target.templates:11001
msgid "Help on partitioning"
msgstr "Hjælp om partitionering"

#. Type: note
#. Description
#. :sl1:
#: ../partman-target.templates:1001
msgid ""
"Partitioning a hard drive consists of dividing it to create the space needed "
"to install your new system.  You need to choose which partition(s) will be "
"used for the installation."
msgstr ""
"Partitionering af en harddisk består i at opdele denne i logiske dele "
"(partitioner) for at give plads til at installere dit nye system. Du skal "
"vælge hvilke partitioner, der skal bruges til installationen."

#. Type: note
#. Description
#. :sl1:
#: ../partman-target.templates:1001
msgid "Select a free space to create partitions in it."
msgstr "Vælg et frit område for at oprette partitioner på det."

#. Type: note
#. Description
#. :sl1:
#: ../partman-target.templates:1001
msgid ""
"Select a device to remove all partitions in it and create a new empty "
"partition table."
msgstr ""
"Vælg en enhed for at fjerne alle partitionerne på denne og oprette en ny, "
"tom partitionstabel."

#. Type: note
#. Description
#. :sl1:
#: ../partman-target.templates:1001
msgid ""
"Select a partition to remove it or to specify how it should be used. At a "
"bare minimum, you need one partition to contain the root of the file system "
"(whose mount point is /).  Most people also feel that a separate swap "
"partition is a necessity.  \"Swap\" is scratch space for an operating "
"system, which allows the system to use disk storage as \"virtual memory\"."
msgstr ""
"Vælg en partition for at fjerne den eller angive hvordan Debian skal benytte "
"den. Som et absolut minimum skal du have én partition til filsystemets rod "
"(hvis monteringspunkt er /). De fleste synes også at det er nødvendigt at "
"have en swappartition. \"Swap\" er et styresystems arbejdsområde, som det "
"kan bruge som \"virtuel hukommelse\"."

#. Type: note
#. Description
#. :sl1:
#: ../partman-target.templates:1001
msgid ""
"When the partition is already formatted you may choose to keep and use the "
"existing data in the partition.  Partitions that will be used in this way "
"are marked with \"${KEEP}\" in the main partitioning menu."
msgstr ""
"Når en partition allerede er formateret, kan du vælge at bevare den og bruge "
"de eksisterende data på partitionen. Partitioner, der benyttes på denne måde "
"markeres med \"${KEEP}\" i partitioneringens hovedmenu."

#. Type: note
#. Description
#. :sl1:
#: ../partman-target.templates:1001
msgid ""
"In general you will want to format the partition with a newly created file "
"system.  NOTE: all data in the partition will be irreversibly deleted.  If "
"you decide to format a partition that is already formatted, it will be "
"marked with \"${DESTROY}\" in the main partitioning menu.  Otherwise it will "
"be marked with \"${FORMAT}\"."
msgstr ""
"Generelt er det en god idé at formatere partitionen med et nyoprettet "
"filsystem. BEMÆRK: Alle data på partitionen vil uigenkaldeligt blive "
"slettet. Hvis du vælger at formatere en partition, der allerede er "
"formateret, vil den blive markeret med \"${DESTROY}\" i partitioneringens "
"hovedmenu. Ellers vil den blive markeret med \"${FORMAT}\"."

#. Type: text
#. Description
#. :sl1:
#: ../partman-target.templates:2001
msgid ""
"In order to start your new system, a so called boot loader is used.  It can "
"be installed either in the master boot record of the first hard disk, or in "
"a partition.  When the boot loader is installed in a partition, you must set "
"the bootable flag for it. Such a partition will be marked with \"${BOOTABLE}"
"\" in the main partitioning menu."
msgstr ""
"Der skal bruges en såkaldt opstartsindlæser (\"boot loader\")  til at starte "
"dit nye system op. Den kan installeres enten på den første harddisks "
"opstartsspor (\"master boot record\") eller på en partition. Hvis "
"opstartsindlæseren installeres på en partition, skal opstartsflaget "
"(\"bootable flag\") sættes for denne. Sådan en partition vil være markeret "
"med \"${BOOTABLE}\" i partitioneringens hovedmenu."

#. Type: text
#. Description
#. :sl4:
#: ../partman-target.templates:3001
msgid ""
"In order to start your new system, a so called boot loader is used.  It is "
"installed in a boot partition.  You must set the bootable flag for the "
"partition.  Such a partition will be marked with \"${BOOTABLE}\" in the main "
"partitioning menu."
msgstr ""
"Der skal bruges en såkaldt opstartsindlæser (\"boot loader\")  til at starte "
"dit nye system op. Den installeres på en opstartspartition. Du skal aktivere "
"denne partitions opstartsflag (\"bootable flag\"). En sådan partition vil "
"blive markeret med \"${BOOTABLE}\" i partitioneringens hovedmenu."

#. Type: error
#. Description
#. :sl2:
#: ../partman-target.templates:4001
#, fuzzy
msgid "Identical labels for two file systems"
msgstr "Identiske monteringspunkter for to filsystemer"

#. Type: error
#. Description
#. :sl2:
#: ../partman-target.templates:4001
msgid ""
"Two file systems are assigned the same label (${LABEL}): ${PART1} and "
"${PART2}. Since file system labels are usually used as unique identifiers, "
"this is likely to cause reliability problems later."
msgstr ""

#. Type: error
#. Description
#. :sl2:
#: ../partman-target.templates:4001
#, fuzzy
msgid "Please correct this by changing labels."
msgstr "Ret dette ved at ændre monteringspunkterne."

#. Type: error
#. Description
#. :sl2:
#: ../partman-target.templates:5001
msgid "Identical mount points for two file systems"
msgstr "Identiske monteringspunkter for to filsystemer"

#. Type: error
#. Description
#. :sl2:
#: ../partman-target.templates:5001
msgid ""
"Two file systems are assigned the same mount point (${MOUNTPOINT}): ${PART1} "
"and ${PART2}."
msgstr ""
"Der er to filsystemer, der er monteret på samme monteringspunkt, "
"${MOUNTPOINT}:${PART1} og ${PART2}."

#. Type: error
#. Description
#. :sl2:
#: ../partman-target.templates:5001
msgid "Please correct this by changing mount points."
msgstr "Ret dette ved at ændre monteringspunkterne."

#. Type: error
#. Description
#. :sl2:
#: ../partman-target.templates:6001
msgid "No root file system"
msgstr "Intet rodfilsystem"

#. Type: error
#. Description
#. :sl2:
#: ../partman-target.templates:6001
msgid "No root file system is defined."
msgstr "Der er ikke defineret noget rodfilsystem."

#. Type: error
#. Description
#. :sl2:
#. Type: error
#. Description
#. :sl2:
#: ../partman-target.templates:6001 ../partman-target.templates:7001
msgid "Please correct this from the partitioning menu."
msgstr "Ret dette fra partitioneringsmenuen."

#. Type: error
#. Description
#. :sl2:
#: ../partman-target.templates:7001
msgid "Separate file system not allowed here"
msgstr "Et selvstændigt filsystem er ikke tilladt her"

#. Type: error
#. Description
#. :sl2:
#: ../partman-target.templates:7001
msgid ""
"You assigned a separate file system to ${MOUNTPOINT}, but in order for the "
"system to start correctly this directory must be on the root file system."
msgstr ""
"Du satte et selvstændigt filsystem af til ${MOUNTPOINT}, men hvis systemet "
"skal starte korrekt, er det nødvendigt at dette katalog er en del af "
"rodfilsystemet (/)."

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-target.templates:8001
msgid "Do you want to resume partitioning?"
msgstr "Vil du fortsætte partitioneringen?"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-target.templates:8001
msgid ""
"The attempt to mount a file system with type ${TYPE} in ${DEVICE} at "
"${MOUNTPOINT} failed."
msgstr ""
"Forsøget på at montere et filsystem med typen ${TYPE} fra ${DEVICE} på "
"${MOUNTPOINT} mislykkedes."

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-target.templates:8001
msgid "You may resume partitioning from the partitioning menu."
msgstr "Du kan fortsætte partitioneringen fra partitioneringsmenuen."

#. Type: select
#. Description
#: ../partman-target.templates:9001
msgid "How to use this partition:"
msgstr "Hvordan denne partition skal bruges:"

#. Type: text
#. Description
#. :sl2:
#: ../partman-target.templates:10001
msgid "Use as:"
msgstr "Brug som:"

#. Type: error
#. Description
#: ../partman-target.templates:13001
msgid "Failed to remove conflicting files"
msgstr "Kunne ikke fjerne konflikterende filer"

#. Type: error
#. Description
#: ../partman-target.templates:13001
msgid ""
"The installer needs to remove operating system files from the install "
"target, but was unable to do so.  The install cannot continue."
msgstr ""
"Installationsprogrammet skal fjerne operativsystemsfiler fra "
"installationsmålet, men det var ikke muligt. Installationen kan ikke "
"forsætte."

#. Type: text
#. Description
#: ../partman-target.templates:14001
msgid "Removing conflicting operating system files..."
msgstr "Fjerner konflikterende operativsystemsfiler..."

#. Type: boolean
#. Description
#: ../partman-target.templates:15001
msgid "Do you want to return to the partitioner?"
msgstr "Vil du vende tilbage til partitioneringsprogrammet?"

#. Type: boolean
#. Description
#: ../partman-target.templates:15001
msgid ""
"The file system on ${PARTITION} assigned to ${MOUNTPOINT} has not been "
"marked for formatting.  Directories containing system files (/etc, /lib, /"
"usr, /var, ...) that already exist under any defined mountpoint will be "
"deleted during the install."
msgstr ""
"Filsystemet på ${PARTITION} tildelt til ${MOUNTPOINT} er ikke blevet "
"markeret til formattering. Kataloger der indeholder systemfiler (/etc, /"
"lib, /usr, /var, ...), som allerede eksisterer under ethvert angivet "
"monteringspunkt, vil blive slettet under installationen."

#. Type: boolean
#. Description
#: ../partman-target.templates:15001
msgid ""
"Please ensure that you have backed up any critical data before installing."
msgstr ""
"Du bør sikre dig, at du har sikkerhedskopieret alle vigtige data, før du "
"installerer."