/* Save current context and jump to a new context. Copyright (C) 2005, 2006, 2008, 2009 Free Software Foundation, Inc. This file is part of the GNU C Library. The GNU C Library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. The GNU C Library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with the GNU C Library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston MA 02110-1301 USA. */ /* This is the common implementation of setcontext for powerpc32. It not complete in itself should be included in to a framework that defines: __CONTEXT_FUNC_NAME and if appropriate: __CONTEXT_ENABLE_FPRS __CONTEXT_ENABLE_VRS Any archecture that implements the Vector unit is assumed to also implement the floating unit. */ /* Stack frame offsets. */ #define _FRAME_BACKCHAIN 0 #define _FRAME_LR_SAVE 4 #define _FRAME_PARM_SAVE1 8 #define _FRAME_PARM_SAVE2 12 #define _FRAME_PARM_SAVE3 16 #define _FRAME_PARM_SAVE4 20 #ifdef __CONTEXT_ENABLE_VRS .machine "altivec" #endif ENTRY(__CONTEXT_FUNC_NAME) stwu r1,-16(r1) cfi_adjust_cfa_offset (16) /* Insure that the _UC_REGS start on a quadword boundary. */ stw r3,_FRAME_PARM_SAVE1(r1) addi r3,r3,_UC_REG_SPACE+12 stw r4,_FRAME_PARM_SAVE2(r1) /* new context pointer */ clrrwi r3,r3,4 /* Save the general purpose registers */ stw r0,_UC_GREGS+(PT_R0*4)(r3) mflr r0 stw r2,_UC_GREGS+(PT_R2*4)(r3) stw r4,_UC_GREGS+(PT_R4*4)(r3) /* Set the callers LR_SAVE, and the ucontext LR and NIP to the callers return address. */ stw r0,_UC_GREGS+(PT_LNK*4)(r3) stw r0,_UC_GREGS+(PT_NIP*4)(r3) stw r0,_FRAME_LR_SAVE+16(r1) cfi_offset (lr, _FRAME_LR_SAVE) stw r5,_UC_GREGS+(PT_R5*4)(r3) stw r6,_UC_GREGS+(PT_R6*4)(r3) stw r7,_UC_GREGS+(PT_R7*4)(r3) stw r8,_UC_GREGS+(PT_R8*4)(r3) stw r9,_UC_GREGS+(PT_R9*4)(r3) stw r10,_UC_GREGS+(PT_R10*4)(r3) stw r11,_UC_GREGS+(PT_R11*4)(r3) stw r12,_UC_GREGS+(PT_R12*4)(r3) stw r13,_UC_GREGS+(PT_R13*4)(r3) stw r14,_UC_GREGS+(PT_R14*4)(r3) stw r15,_UC_GREGS+(PT_R15*4)(r3) stw r16,_UC_GREGS+(PT_R16*4)(r3) stw r17,_UC_GREGS+(PT_R17*4)(r3) stw r18,_UC_GREGS+(PT_R18*4)(r3) stw r19,_UC_GREGS+(PT_R19*4)(r3) stw r20,_UC_GREGS+(PT_R20*4)(r3) stw r21,_UC_GREGS+(PT_R21*4)(r3) stw r22,_UC_GREGS+(PT_R22*4)(r3) stw r23,_UC_GREGS+(PT_R23*4)(r3) stw r24,_UC_GREGS+(PT_R24*4)(r3) stw r25,_UC_GREGS+(PT_R25*4)(r3) stw r26,_UC_GREGS+(PT_R26*4)(r3) stw r27,_UC_GREGS+(PT_R27*4)(r3) stw r28,_UC_GREGS+(PT_R28*4)(r3) stw r29,_UC_GREGS+(PT_R29*4)(r3) stw r30,_UC_GREGS+(PT_R30*4)(r3) stw r31,_UC_GREGS+(PT_R31*4)(r3) /* Save the value of R1. We had to push the stack before we had the address of uc_reg_space. So compute the address of the callers stack pointer and save it as R1. */ addi r8,r1,16 li r0,0 /* Save the count, exception and condition registers. */ mfctr r11 mfxer r10 mfcr r9 stw r8,_UC_GREGS+(PT_R1*4)(r3) stw r11,_UC_GREGS+(PT_CTR*4)(r3) stw r10,_UC_GREGS+(PT_XER*4)(r3) stw r9,_UC_GREGS+(PT_CCR*4)(r3) /* Set the return value of getcontext to "success". R3 is the only register whose value is not preserved in the saved context. */ stw r0,_UC_GREGS+(PT_R3*4)(r3) /* Zero fill fields that can't be set in user state. */ stw r0,_UC_GREGS+(PT_MSR*4)(r3) stw r0,_UC_GREGS+(PT_MQ*4)(r3) #ifdef __CONTEXT_ENABLE_FPRS /* Save the floating-point registers */ stfd fp0,_UC_FREGS+(0*8)(r3) stfd fp1,_UC_FREGS+(1*8)(r3) stfd fp2,_UC_FREGS+(2*8)(r3) stfd fp3,_UC_FREGS+(3*8)(r3) stfd fp4,_UC_FREGS+(4*8)(r3) stfd fp5,_UC_FREGS+(5*8)(r3) stfd fp6,_UC_FREGS+(6*8)(r3) stfd fp7,_UC_FREGS+(7*8)(r3) stfd fp8,_UC_FREGS+(8*8)(r3) stfd fp9,_UC_FREGS+(9*8)(r3) stfd fp10,_UC_FREGS+(10*8)(r3) stfd fp11,_UC_FREGS+(11*8)(r3) stfd fp12,_UC_FREGS+(12*8)(r3) stfd fp13,_UC_FREGS+(13*8)(r3) stfd fp14,_UC_FREGS+(14*8)(r3) stfd fp15,_UC_FREGS+(15*8)(r3) stfd fp16,_UC_FREGS+(16*8)(r3) stfd fp17,_UC_FREGS+(17*8)(r3) stfd fp18,_UC_FREGS+(18*8)(r3) stfd fp19,_UC_FREGS+(19*8)(r3) stfd fp20,_UC_FREGS+(20*8)(r3) stfd fp21,_UC_FREGS+(21*8)(r3) stfd fp22,_UC_FREGS+(22*8)(r3) stfd fp23,_UC_FREGS+(23*8)(r3) stfd fp24,_UC_FREGS+(24*8)(r3) stfd fp25,_UC_FREGS+(25*8)(r3) stfd fp26,_UC_FREGS+(26*8)(r3) stfd fp27,_UC_FREGS+(27*8)(r3) stfd fp28,_UC_FREGS+(28*8)(r3) stfd fp29,_UC_FREGS+(29*8)(r3) mffs fp0 stfd fp30,_UC_FREGS+(30*8)(r3) stfd fp31,_UC_FREGS+(31*8)(r3) stfd fp0,_UC_FREGS+(32*8)(r3) # ifdef PIC mflr r8 # ifdef HAVE_ASM_PPC_REL16 bcl 20,31,1f 1: mflr r7 addis r7,r7,_GLOBAL_OFFSET_TABLE_-1b@ha addi r7,r7,_GLOBAL_OFFSET_TABLE_-1b@l # else bl _GLOBAL_OFFSET_TABLE_@local-4 mflr r7 # endif # ifdef SHARED lwz r7,_rtld_global_ro@got(r7) mtlr r8 lwz r7,RTLD_GLOBAL_RO_DL_HWCAP_OFFSET+4(r7) # else lwz r7,_dl_hwcap@got(r7) mtlr r8 lwz r7,4(r7) # endif # else lis r7,(_dl_hwcap+4)@ha lwz r7,(_dl_hwcap+4)@l(r7) # endif # ifdef __CONTEXT_ENABLE_VRS andis. r6,r7,(PPC_FEATURE_HAS_ALTIVEC >> 16) la r10,(_UC_VREGS)(r3) la r9,(_UC_VREGS+16)(r3) /* beq L(no_vec)*/ beq 2f /* address of the combined VSCR/VSAVE quadword. */ la r8,(_UC_VREGS+512)(r3) /* Save the vector registers */ stvx v0,0,r10 stvx v1,0,r9 addi r10,r10,32 addi r9,r9,32 /* We need to get the Vector Status and Control Register early to avoid store order problems later with the VSAVE register that shares the same quadword. */ mfvscr v0 stvx v2,0,r10 stvx v3,0,r9 addi r10,r10,32 addi r9,r9,32 stvx v0,0,r8 stvx v4,0,r10 stvx v5,0,r9 addi r10,r10,32 addi r9,r9,32 stvx v6,0,r10 stvx v7,0,r9 addi r10,r10,32 addi r9,r9,32 stvx v8,0,r10 stvx v9,0,r9 addi r10,r10,32 addi r9,r9,32 stvx v10,0,r10 stvx v11,0,r9 addi r10,r10,32 addi r9,r9,32 stvx v12,0,r10 stvx v13,0,r9 addi r10,r10,32 addi r9,r9,32 stvx v14,0,r10 stvx v15,0,r9 addi r10,r10,32 addi r9,r9,32 stvx v16,0,r10 stvx v17,0,r9 addi r10,r10,32 addi r9,r9,32 stvx v18,0,r10 stvx v19,0,r9 addi r10,r10,32 addi r9,r9,32 stvx v20,0,r10 stvx v21,0,r9 addi r10,r10,32 addi r9,r9,32 stvx v22,0,r10 stvx v23,0,r9 addi r10,r10,32 addi r9,r9,32 stvx v24,0,r10 stvx v25,0,r9 addi r10,r10,32 addi r9,r9,32 stvx v26,0,r10 stvx v27,0,r9 addi r10,r10,32 addi r9,r9,32 stvx v28,0,r10 stvx v29,0,r9 addi r10,r10,32 addi r9,r9,32 mfvscr v0 stvx v30,0,r10 stvx v31,0,r9 stw r0,0(r8) 2: /*L(no_vec):*/ # endif /* __CONTEXT_ENABLE_VRS */ #endif /* __CONTEXT_ENABLE_FPRS */ #ifdef __GETCONTEXT_EXTRA __GETCONTEXT_EXTRA #endif /* Restore ucontext (parm1) from stack. */ lwz r12,_FRAME_PARM_SAVE1(r1) li r4,0 stw r3,_UC_REGS_PTR(r12) addi r5,r12,_UC_SIGMASK li r3,SIG_SETMASK bl __sigprocmask@local cmpwi r3,0 bne 3f /* L(error_exit) */ /* * If the new ucontext refers to the point where we were interrupted * by a signal, we have to use the rt_sigreturn system call to * return to the context so we get both LR and CTR restored. * * Otherwise, the context we are restoring is either just after * a procedure call (getcontext/swapcontext) or at the beginning * of a procedure call (makecontext), so we don't need to restore * r0, xer, ctr. We don't restore r2 since it will be used as * the TLS pointer. */ lwz r4,_FRAME_PARM_SAVE2(r1) lwz r31,_UC_REGS_PTR(r4) lwz r0,_UC_GREGS+(PT_MSR*4)(r31) cmpwi r0,0 bne 4f /* L(do_sigret) */ #ifdef __CONTEXT_ENABLE_FPRS # ifdef __CONTEXT_ENABLE_VRS # ifdef PIC mflr r8 # ifdef HAVE_ASM_PPC_REL16 bcl 20,31,5f 5: mflr r7 addis r7,r7,_GLOBAL_OFFSET_TABLE_-5b@ha addi r7,r7,_GLOBAL_OFFSET_TABLE_-5b@l # else bl _GLOBAL_OFFSET_TABLE_@local-4 mflr r7 # endif mtlr r8 # ifdef SHARED lwz r7,_rtld_global_ro@got(r7) lwz r7,RTLD_GLOBAL_RO_DL_HWCAP_OFFSET+4(r7) # else lwz r7,_dl_hwcap@got(r7) lwz r7,4(r7) # endif # else lis r7,(_dl_hwcap+4)@ha lwz r7,(_dl_hwcap+4)@l(r7) # endif andis. r7,r7,(PPC_FEATURE_HAS_ALTIVEC >> 16) la r10,(_UC_VREGS)(r31) beq 6f /* L(has_no_vec) */ lwz r0,(32*16)(r10) li r9,(32*16) cmpwi r0,0 mtspr VRSAVE,r0 beq 6f /* L(has_no_vec) */ lvx v19,r9,r10 la r9,(16)(r10) lvx v0,0,r10 lvx v1,0,r9 addi r10,r10,32 addi r9,r9,32 mtvscr v19 lvx v2,0,r10 lvx v3,0,r9 addi r10,r10,32 addi r9,r9,32 lvx v4,0,r10 lvx v5,0,r9 addi r10,r10,32 addi r9,r9,32 lvx v6,0,r10 lvx v7,0,r9 addi r10,r10,32 addi r9,r9,32 lvx v8,0,r10 lvx v9,0,r9 addi r10,r10,32 addi r9,r9,32 lvx v10,0,r10 lvx v11,0,r9 addi r10,r10,32 addi r9,r9,32 lvx v12,0,r10 lvx v13,0,r9 addi r10,r10,32 addi r9,r9,32 lvx v14,0,r10 lvx v15,0,r9 addi r10,r10,32 addi r9,r9,32 lvx v16,0,r10 lvx v17,0,r9 addi r10,r10,32 addi r9,r9,32 lvx v18,0,r10 lvx v19,0,r9 addi r10,r10,32 addi r9,r9,32 lvx v20,0,r10 lvx v21,0,r9 addi r10,r10,32 addi r9,r9,32 lvx v22,0,r10 lvx v23,0,r9 addi r10,r10,32 addi r9,r9,32 lvx v24,0,r10 lvx v25,0,r9 addi r10,r10,32 addi r9,r9,32 lvx v26,0,r10 lvx v27,0,r9 addi r10,r10,32 addi r9,r9,32 lvx v28,0,r10 lvx v29,0,r9 addi r10,r10,32 addi r9,r9,32 lvx v30,0,r10 lvx v31,0,r9 addi r10,r10,32 addi r9,r9,32 lvx v10,0,r10 lvx v11,0,r9 6: /* L(has_no_vec): */ # endif /* __CONTEXT_ENABLE_VRS */ /* Restore the floating-point registers */ lfd fp31,_UC_FREGS+(32*8)(r31) lfd fp0,_UC_FREGS+(0*8)(r31) # ifdef _ARCH_PWR6 /* Use the extended four-operand version of the mtfsf insn. */ mtfsf 0xff,fp31,1,0 # else .machine push .machine "power6" /* Availability of DFP indicates a 64-bit FPSCR. */ andi. r6,r7,PPC_FEATURE_HAS_DFP beq 7f /* Use the extended four-operand version of the mtfsf insn. */ mtfsf 0xff,fp31,1,0 b 8f /* Continue to operate on the FPSCR as if it were 32-bits. */ 7: mtfsf 0xff,fp31 8: .machine pop #endif /* _ARCH_PWR6 */ lfd fp1,_UC_FREGS+(1*8)(r31) lfd fp2,_UC_FREGS+(2*8)(r31) lfd fp3,_UC_FREGS+(3*8)(r31) lfd fp4,_UC_FREGS+(4*8)(r31) lfd fp5,_UC_FREGS+(5*8)(r31) lfd fp6,_UC_FREGS+(6*8)(r31) lfd fp7,_UC_FREGS+(7*8)(r31) lfd fp8,_UC_FREGS+(8*8)(r31) lfd fp9,_UC_FREGS+(9*8)(r31) lfd fp10,_UC_FREGS+(10*8)(r31) lfd fp11,_UC_FREGS+(11*8)(r31) lfd fp12,_UC_FREGS+(12*8)(r31) lfd fp13,_UC_FREGS+(13*8)(r31) lfd fp14,_UC_FREGS+(14*8)(r31) lfd fp15,_UC_FREGS+(15*8)(r31) lfd fp16,_UC_FREGS+(16*8)(r31) lfd fp17,_UC_FREGS+(17*8)(r31) lfd fp18,_UC_FREGS+(18*8)(r31) lfd fp19,_UC_FREGS+(19*8)(r31) lfd fp20,_UC_FREGS+(20*8)(r31) lfd fp21,_UC_FREGS+(21*8)(r31) lfd fp22,_UC_FREGS+(22*8)(r31) lfd fp23,_UC_FREGS+(23*8)(r31) lfd fp24,_UC_FREGS+(24*8)(r31) lfd fp25,_UC_FREGS+(25*8)(r31) lfd fp26,_UC_FREGS+(26*8)(r31) lfd fp27,_UC_FREGS+(27*8)(r31) lfd fp28,_UC_FREGS+(28*8)(r31) lfd fp29,_UC_FREGS+(29*8)(r31) lfd fp30,_UC_FREGS+(30*8)(r31) lfd fp31,_UC_FREGS+(31*8)(r31) #endif /* __CONTEXT_ENABLE_FPRS */ #ifdef __SETCONTEXT_EXTRA __SETCONTEXT_EXTRA #endif /* Restore LR and CCR, and set CTR to the NIP value */ lwz r3,_UC_GREGS+(PT_LNK*4)(r31) lwz r4,_UC_GREGS+(PT_NIP*4)(r31) lwz r5,_UC_GREGS+(PT_CCR*4)(r31) mtlr r3 mtctr r4 mtcr r5 /* Restore the general registers */ lwz r3,_UC_GREGS+(PT_R3*4)(r31) lwz r4,_UC_GREGS+(PT_R4*4)(r31) lwz r5,_UC_GREGS+(PT_R5*4)(r31) lwz r6,_UC_GREGS+(PT_R6*4)(r31) lwz r7,_UC_GREGS+(PT_R7*4)(r31) lwz r8,_UC_GREGS+(PT_R8*4)(r31) lwz r9,_UC_GREGS+(PT_R9*4)(r31) lwz r10,_UC_GREGS+(PT_R10*4)(r31) lwz r11,_UC_GREGS+(PT_R11*4)(r31) lwz r12,_UC_GREGS+(PT_R12*4)(r31) lwz r13,_UC_GREGS+(PT_R13*4)(r31) lwz r14,_UC_GREGS+(PT_R14*4)(r31) lwz r15,_UC_GREGS+(PT_R15*4)(r31) lwz r16,_UC_GREGS+(PT_R16*4)(r31) lwz r17,_UC_GREGS+(PT_R17*4)(r31) lwz r18,_UC_GREGS+(PT_R18*4)(r31) lwz r19,_UC_GREGS+(PT_R19*4)(r31) lwz r20,_UC_GREGS+(PT_R20*4)(r31) lwz r21,_UC_GREGS+(PT_R21*4)(r31) lwz r22,_UC_GREGS+(PT_R22*4)(r31) lwz r23,_UC_GREGS+(PT_R23*4)(r31) lwz r24,_UC_GREGS+(PT_R24*4)(r31) lwz r25,_UC_GREGS+(PT_R25*4)(r31) lwz r26,_UC_GREGS+(PT_R26*4)(r31) lwz r27,_UC_GREGS+(PT_R27*4)(r31) lwz r28,_UC_GREGS+(PT_R28*4)(r31) lwz r29,_UC_GREGS+(PT_R29*4)(r31) lwz r30,_UC_GREGS+(PT_R30*4)(r31) lwz r1,_UC_GREGS+(PT_R1*4)(r31) lwz r31,_UC_GREGS+(PT_R31*4)(r31) bctr 3:/*L(error_exit):*/ lwz r0,_FRAME_LR_SAVE+16(r1) addi r1,r1,16 mtlr r0 blr 4:/*L(do_sigret):*/ addi r1,r4,-0xd0 li r0,SYS_ify(rt_sigreturn) sc /* NOTREACHED */ END(__CONTEXT_FUNC_NAME)