/*
 *
 * (c) Copyright 1989 OPEN SOFTWARE FOUNDATION, INC.
 * (c) Copyright 1989 HEWLETT-PACKARD COMPANY
 * (c) Copyright 1989 DIGITAL EQUIPMENT CORPORATION
 * To anyone who acknowledges that this file is provided "AS IS"
 * without any express or implied warranty:
 *                 permission to use, copy, modify, and distribute this
 * file for any purpose is hereby granted without fee, provided that
 * the above copyright notices and this notice appears in all source
 * code copies, and that none of the names of Open Software
 * Foundation, Inc., Hewlett-Packard Company, or Digital Equipment
 * Corporation be used in advertising or publicity pertaining to
 * distribution of the software without specific, written prior
 * permission.  Neither Open Software Foundation, Inc., Hewlett-
 * Packard Company, nor Digital Equipment Corporation makes any
 * representations about the suitability of this software for any
 * purpose.
 *
 */
/*
 */
/*
**
**  NAME
**
**      twr_uxd.c
**
**  FACILITY:
**
**      Protocol Tower Services for the internet address family
**
**  ABSTRACT:
**
**      The protocol tower service provides routines that:
**
**      o  convert a socket address to the lower floors of
**         a protocol tower
**
**      o  convert a protocol tower to a socket address
**
**
*/

#include <commonp.h>    /* Common declarations for all RPC runtime */
#include <com.h>        /* Common communications services */
#include <twrp.h>	/* Private tower services */
#include <uxdnaf.h>

/*
 *  Include the Internet specific socket address
 */
#ifdef VMS
#include <un.h>
#else
#include <sys/un.h>
#endif

/*
**++
**
**  ROUTINE NAME:       twr_uxd_lower_flrs_from_sa
**
**  SCOPE:              PUBLIC - declared in twr.idl
**
**  DESCRIPTION:
**
**  Creates the canonical representation of an internet protocol tower's
**  lower floors from a sockaddr. The canonical form can be transmitted
**  on the wire, or included in a DNS tower.
**
**  INPUTS:
**
**      trans_prot      Integer value specifying the transport layer
**                      protocol for the Internet address family.
**                      For address family RPC_C_NAF_ID_UXD specify:
**
**                         RPC_C_NETWORK_PROTOCOL_ID_UXD for udp
**
**      sa              Internet-specific socket address data
**                      structure.
**
**  INPUTS/OUTPUTS:     none
**
**  OUTPUTS:
**
**      lower_flrs      Returns the lower tower floors in a twr_t
**                      structure (includes the floor count in the
**                      "tower_octet_string" member).
**
**      status          A value indicating the return status of the routine:
**                          twr_s_ok
**                          twr_s_unknown_sa
**
**  IMPLICIT INPUTS:    none
**
**  IMPLICIT OUTPUTS:   none
**
**  FUNCTION VALUE:     void
**
**  SIDE EFFECTS:       none
**
**--
**/


PUBLIC void twr_uxd_lower_flrs_from_sa
#ifdef _DCE_PROTO_
(
    sockaddr_p_t      sa,
    twr_p_t           *lower_flrs,
    unsigned32        *status
)
#else
(sa, lower_flrs, status)
sockaddr_p_t      sa;
twr_p_t           *lower_flrs;
unsigned32        *status;
#endif
{
    unsigned8   protocol_id[TWR_C_NUM_UXD_LOWER_FLRS];
    unsigned16  id_size = TWR_C_TOWER_PROT_ID_SIZE,
                floor_count,
                related_data_size[TWR_C_NUM_UXD_LOWER_FLRS],
                twr_rep_16;
    unsigned32  count,
                twr_t_length;
    byte_p_t    related_data_ptr[TWR_C_NUM_UXD_LOWER_FLRS],
                tmp_tower;
    char       *sun_path;

    CODING_ERROR (status);
    RPC_VERIFY_INIT ();

    if (sa->family == RPC_C_NAF_ID_UXD)
    {
        protocol_id[0] = TWR_C_FLR_PROT_ID_UXD;
    }
    else
    {
        *status = twr_s_unknown_sa;
        return;
    }

    /*
     * Since we now know the socket address we're dealing with,
     * collect the sizes of each field to allocate memory, and
     * remember the pointers to the fields so we can copy the
     * data once we have allocated the tower string.
     */
    floor_count = TWR_C_NUM_UXD_LOWER_FLRS;

    /*
     * Not sure whether we need to "canonicalize" this.
     */
    sun_path = ((struct sockaddr_un *)sa)->sun_path;
    if (strncmp(sun_path, RPC_C_UXD_DIR, RPC_C_UXD_DIR_LEN) == 0)
    {
        related_data_ptr[0] = (byte_p_t)&sun_path[RPC_C_UXD_DIR_LEN + 1];
    }
    else
    {
        related_data_ptr[0] = (byte_p_t)sun_path;
    }
    related_data_size[0] = strlen((char*) related_data_ptr[0]) + 1;

    /*
     * Calculate the length of the tower floors.
     */

    twr_t_length = TWR_C_TOWER_FLR_COUNT_SIZE;  /* to store floor count */

    for ( count = 0; count < floor_count; count++ )
    {
        twr_t_length += TWR_C_FLR_OVERHEAD;
        twr_t_length += related_data_size[count];
    }

    /*
     * Next allocate space for the tower structure
     */
    RPC_MEM_ALLOC (
        *lower_flrs,
        twr_p_t,
        sizeof (twr_t) + (twr_t_length - 1),
        RPC_C_MEM_TOWER,
        RPC_C_MEM_WAITOK );

    /*
     * Copy the length of the tower octet string into the tower structure
     */
    (*lower_flrs)->tower_length = twr_t_length;

    /*
     * Copy the floor information into the tower octet string
     */

    /*
     * Use a temporary for the octet string since we need
     * to increment the pointer.
     */
    tmp_tower = (*lower_flrs)->tower_octet_string;

    /*
     * Copy the number of floors into the tower octet string
     */
    twr_rep_16 = floor_count;
    RPC_RESOLVE_ENDIAN_INT16 (twr_rep_16);
    memcpy ((char *)tmp_tower, (char *)&twr_rep_16,
            TWR_C_TOWER_FLR_COUNT_SIZE);

    tmp_tower += TWR_C_TOWER_FLR_COUNT_SIZE;

    /*
     * Convert the protocol identifier size to its proper
     * representation for use in the following loop.
     */
    RPC_RESOLVE_ENDIAN_INT16 (id_size);

    for ( count = 0; count < floor_count; count++ )
    {
        /*
         * Copy the length of the protocol identifier field into
         * tower octet string.  (Converted before the loop.)
         */
        memcpy ((char *)tmp_tower, (char *)&id_size,
                TWR_C_TOWER_FLR_LHS_COUNT_SIZE);

        tmp_tower += TWR_C_TOWER_FLR_LHS_COUNT_SIZE;


        /*
         * Copy the protocol identifier into tower octet string
         * (1 byte so no need to convert endian representation).
         */
        memcpy ((char *)tmp_tower, (char *)&(protocol_id[count]),
                TWR_C_TOWER_PROT_ID_SIZE);

        tmp_tower += TWR_C_TOWER_PROT_ID_SIZE;

        /*
         * Copy the length of the address data field into
         * tower octet string.
         */
        twr_rep_16 = related_data_size[count];
        RPC_RESOLVE_ENDIAN_INT16 (twr_rep_16);
        memcpy ((char *)tmp_tower, (char *)&twr_rep_16,
                TWR_C_TOWER_FLR_RHS_COUNT_SIZE);

        tmp_tower += TWR_C_TOWER_FLR_RHS_COUNT_SIZE;

        /*
         * If there is addressing data, copy the address data field into
         * tower octet string
         */
        if (related_data_size[count])
        {
            memcpy ((char *)tmp_tower, (char *)related_data_ptr[count],
                    related_data_size[count]);

            /*
             * Set up for the next floor.
             */
            tmp_tower += related_data_size[count];
        }
    }

    *status = twr_s_ok;
}

/*
**++
**
**  ROUTINE NAME:       twr_uxd_lower_flrs_to_sa
**
**  SCOPE:              PUBLIC - declared in twr.idl
**
**  DESCRIPTION:
**
**  Creates an internet sockaddr from the canonical representation of an
**  internet protocol tower's lower floors.
**
**  INPUTS:
**
**      tower_octet_string
**                      The protocol tower to convert to a sockaddr.
**
**  INPUTS/OUTPUTS:     none
**
**  OUTPUTS:
**
**      sa            Returns a pointer to the created sockaddr structure.
**
**      sa_len          Returns the length, in bytes, of the returned
**                      "sa" argument.
**
**      status          A value indicating the return status of the routine:
**                          twr_s_ok
**                          twr_s_unknown_tower
**
**  IMPLICIT INPUTS:    none
**
**  IMPLICIT OUTPUTS:   none
**
**  FUNCTION VALUE:     void
**
**  SIDE EFFECTS:       none
**
**--
**/

PUBLIC void twr_uxd_lower_flrs_to_sa
#ifdef _DCE_PROTO_
(
    byte_p_t          tower_octet_string,
    sockaddr_p_t      *sa,
    unsigned32        *sa_len,
    unsigned32        *status
)
#else
( tower_octet_string, sa, sa_len, status )
byte_p_t          tower_octet_string;
sockaddr_p_t      *sa;
unsigned32        *sa_len;
unsigned32        *status;
#endif
{
    unsigned8   id;
    byte_p_t    tower;
    unsigned16  count,
                floor_count,
                id_size,
                addr_size;
    unsigned32  length;

    CODING_ERROR (status);
    RPC_VERIFY_INIT ();

    id_size = 0;

    /*
     * Make sure we have a pointer to some data structure.
     */
    if ( !(tower = tower_octet_string))
    {
        *status = twr_s_unknown_tower;
        return;
    }

    /*
     * Get the tower floor count
     */
    memcpy ((char *)&floor_count, (char *)tower, TWR_C_TOWER_FLR_COUNT_SIZE);
    RPC_RESOLVE_ENDIAN_INT16 (floor_count);

    tower += TWR_C_TOWER_FLR_COUNT_SIZE;

    /*
     * Skip over the (application's) upper floors while we look for the
     * beginning of the uxd-specific lower floors.
     */
    for ( count = 0; count < floor_count; count++ )
    {
        /*
         * Get the length of this floor's protocol id field (don't advance
         * the pointer).
         */
        memcpy ((char *)&id_size, (char *)tower,
                TWR_C_TOWER_FLR_LHS_COUNT_SIZE);
        RPC_RESOLVE_ENDIAN_INT16 (id_size);

        /*
         * Get the protocol id (don't advance the pointer).
         * Expect one byte; no need to convert.
         */
        memcpy ((char *)&id, (char *)(tower + TWR_C_TOWER_FLR_LHS_COUNT_SIZE),
                TWR_C_TOWER_PROT_ID_SIZE);

        /*
         * See if we support the protocol id.
         */
        if ( (id_size == TWR_C_TOWER_PROT_ID_SIZE) &&
             (id == TWR_C_FLR_PROT_ID_UXD))
        {
            /*
             * Indicate we found the beginning of the uxd floors.
             */
            *status = twr_s_ok;

            break;
        }
        else
        {
            /*
             * Skip this floor.  Get the address size in order
             * to know how much to skip.
             */
            memcpy ((char *)&addr_size,
                    (char *)(tower + TWR_C_TOWER_FLR_LHS_COUNT_SIZE +
                            id_size), TWR_C_TOWER_FLR_RHS_COUNT_SIZE);
            RPC_RESOLVE_ENDIAN_INT16 (addr_size);

            tower += TWR_C_TOWER_FLR_LHS_COUNT_SIZE + id_size +
                     TWR_C_TOWER_FLR_RHS_COUNT_SIZE + addr_size;

            /*
             * For now, assume we don't find the floors we're looking for.
             */
            *status = twr_s_unknown_tower;
        }
    }

    if (*status != twr_s_ok)
    {
        return;
    }

    /*
     * Skip the floor's protocol id field length and protocol id
     * (now move the pointer).  We already know it's
     * TWR_C_FLR_PROT_ID_UXD.
     */
    tower += (TWR_C_TOWER_FLR_LHS_COUNT_SIZE + id_size);

    /*
     * Allocate space for sockaddr
     */
    length = sizeof(struct sockaddr_un);

    RPC_MEM_ALLOC (
        *sa,
        sockaddr_p_t,
        length,
        RPC_C_MEM_SOCKADDR,
        RPC_C_MEM_WAITOK );

    *sa_len = length;

    /*
     * make sure unused bytes are null
     */
    memset ((char *) *sa, 0, length);

    /*
     * define this as an internet family socket
     */
    ((struct sockaddr_un *)(*sa))->sun_family = RPC_C_NAF_ID_UXD;

    /*
     * Get the length of endpoint address
     */
    memcpy ((char *)&addr_size, (char *)tower, RPC_C_TOWER_FLR_RHS_COUNT_SIZE);
    RPC_RESOLVE_ENDIAN_INT16 (addr_size);
    tower += RPC_C_TOWER_FLR_RHS_COUNT_SIZE;

    /*
     * Copy the endpoint address to the sockaddr.
     */
    tower[addr_size - 1] = '\0';
    if (tower[0] != '/')
    {
        addr_size += RPC_C_UXD_DIR_LEN + 1;
    }
    if (addr_size > sizeof(((struct sockaddr_un *)(*sa))->sun_path))
    {
        *status = rpc_s_no_memory;
        RPC_MEM_FREE (*sa, RPC_C_MEM_SOCKADDR);
        *sa = NULL;
        return;
    }

    snprintf(((struct sockaddr_un *)(*sa))->sun_path,
             sizeof(((struct sockaddr_un *)(*sa))->sun_path),
             "%s%s", (tower[0] == '/') ? "" : RPC_C_UXD_DIR"/",
             tower);

    *status = twr_s_ok;
}