Description: Undocumented upstream changes This patch has been created by dpkg-source during the package build but it might have accumulated changes from several uploads. Please check the changelog to (hopefully) learn more on those changes. --- plymouth-0.8.2.orig/config.h.in +++ plymouth-0.8.2/config.h.in @@ -55,6 +55,9 @@ /* Define to the one symbol short name of this package. */ #undef PACKAGE_TARNAME +/* Define to the home page for this package. */ +#undef PACKAGE_URL + /* Define to the version of this package. */ #undef PACKAGE_VERSION --- plymouth-0.8.2.orig/aclocal.m4 +++ plymouth-0.8.2/aclocal.m4 @@ -13,8 +13,8 @@ m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.63],, -[m4_warning([this file was generated for autoconf 2.63. +m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.65],, +[m4_warning([this file was generated for autoconf 2.65. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically `autoreconf'.])]) @@ -2460,7 +2460,7 @@ linux*oldld* | linux*aout* | linux*coff* ;; # This must be Linux ELF. -linux* | k*bsd*-gnu) +linux* | k*bsd*-gnu | kopensolaris*-gnu) version_type=linux need_lib_prefix=no need_version=no @@ -2485,13 +2485,10 @@ linux* | k*bsd*-gnu) # before this can be enabled. hardcode_into_libs=yes - # Add ABI-specific directories to the system library path. - sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib" - # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra" + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on @@ -2503,6 +2500,18 @@ linux* | k*bsd*-gnu) dynamic_linker='GNU/Linux ld.so' ;; +netbsdelf*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='NetBSD ld.elf_so' + ;; + netbsd*) version_type=sunos need_lib_prefix=no @@ -3090,11 +3099,11 @@ irix5* | irix6* | nonstopux*) ;; # This must be Linux ELF. -linux* | k*bsd*-gnu) +linux* | k*bsd*-gnu | kopensolaris*-gnu) lt_cv_deplibs_check_method=pass_all ;; -netbsd*) +netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' else @@ -3711,7 +3720,7 @@ m4_if([$1], [CXX], [ ;; esac ;; - linux* | k*bsd*-gnu) + linux* | k*bsd*-gnu | kopensolaris*-gnu) case $cc_basename in KCC*) # KAI C++ Compiler @@ -3775,7 +3784,7 @@ m4_if([$1], [CXX], [ ;; esac ;; - netbsd*) + netbsd* | netbsdelf*-gnu) ;; *qnx* | *nto*) # QNX uses GNU C++, but need to define -shared option too, otherwise @@ -3995,7 +4004,7 @@ m4_if([$1], [CXX], [ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; - linux* | k*bsd*-gnu) + linux* | k*bsd*-gnu | kopensolaris*-gnu) case $cc_basename in # old Intel for x86_64 which still supported -KPIC. ecc*) @@ -4200,6 +4209,9 @@ m4_if([$1], [CXX], [ cygwin* | mingw* | cegcc*) _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' ;; + linux* | k*bsd*-gnu) + _LT_TAGVAR(link_all_deplibs, $1)=no + ;; *) _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ;; @@ -4264,6 +4276,9 @@ dnl Note also adjust exclude_expsyms for openbsd*) with_gnu_ld=no ;; + linux* | k*bsd*-gnu) + _LT_TAGVAR(link_all_deplibs, $1)=no + ;; esac _LT_TAGVAR(ld_shlibs, $1)=yes @@ -4285,6 +4300,7 @@ dnl Note also adjust exclude_expsyms for fi supports_anon_versioning=no case `$LD -v 2>&1` in + *GNU\ gold*) supports_anon_versioning=yes ;; *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... @@ -4376,7 +4392,7 @@ _LT_EOF _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; - gnu* | linux* | tpf* | k*bsd*-gnu) + gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) tmp_diet=no if test "$host_os" = linux-dietlibc; then case $cc_basename in @@ -4446,7 +4462,7 @@ _LT_EOF fi ;; - netbsd*) + netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= @@ -4621,6 +4637,7 @@ _LT_EOF if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi + _LT_TAGVAR(link_all_deplibs, $1)=no else # not using gcc if test "$host_cpu" = ia64; then @@ -4859,7 +4876,7 @@ _LT_EOF _LT_TAGVAR(link_all_deplibs, $1)=yes ;; - netbsd*) + netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else @@ -5855,7 +5872,7 @@ if test "$_lt_caught_CXX_error" != yes; _LT_TAGVAR(inherit_rpath, $1)=yes ;; - linux* | k*bsd*-gnu) + linux* | k*bsd*-gnu | kopensolaris*-gnu) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler @@ -7862,15 +7879,15 @@ m4_define([lt_dict_filter], # Generated from ltversion.in. -# serial 3012 ltversion.m4 +# serial 3017 ltversion.m4 # This file is part of GNU Libtool -m4_define([LT_PACKAGE_VERSION], [2.2.6]) -m4_define([LT_PACKAGE_REVISION], [1.3012]) +m4_define([LT_PACKAGE_VERSION], [2.2.6b]) +m4_define([LT_PACKAGE_REVISION], [1.3017]) AC_DEFUN([LTVERSION_VERSION], -[macro_version='2.2.6' -macro_revision='1.3012' +[macro_version='2.2.6b' +macro_revision='1.3017' _LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) _LT_DECL(, macro_revision, 0) ]) @@ -8036,14 +8053,16 @@ fi]) # _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) # --------------------------------------------- m4_define([_PKG_CONFIG], -[if test -n "$$1"; then - pkg_cv_[]$1="$$1" - elif test -n "$PKG_CONFIG"; then - PKG_CHECK_EXISTS([$3], - [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`], - [pkg_failed=yes]) - else - pkg_failed=untried +[if test -n "$PKG_CONFIG"; then + if test -n "$$1"; then + pkg_cv_[]$1="$$1" + else + PKG_CHECK_EXISTS([$3], + [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`], + [pkg_failed=yes]) + fi +else + pkg_failed=untried fi[]dnl ])# _PKG_CONFIG @@ -8087,9 +8106,9 @@ See the pkg-config man page for more det if test $pkg_failed = yes; then _PKG_SHORT_ERRORS_SUPPORTED if test $_pkg_short_errors_supported = yes; then - $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "$2" 2>&1` + $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$2"` else - $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors "$2" 2>&1` + $1[]_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"` fi # Put the nasty error message in config.log where it belongs echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD --- plymouth-0.8.2.orig/Makefile.in +++ plymouth-0.8.2/Makefile.in @@ -172,6 +172,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PANGO_CFLAGS = @PANGO_CFLAGS@ PANGO_LIBS = @PANGO_LIBS@ --- plymouth-0.8.2.orig/configure.ac +++ plymouth-0.8.2/configure.ac @@ -160,6 +160,9 @@ AC_DEFINE_UNQUOTED(BOOT_TTY, "$BOOT_TTY" AC_ARG_WITH(shutdown-tty, AS_HELP_STRING([--with-shutdown-tty=],[Default TTY to use in shutdown mode (by default tty63)]),SHUTDOWN_TTY=${withval},SHUTDOWN_TTY=/dev/tty63) AC_DEFINE_UNQUOTED(SHUTDOWN_TTY, "$SHUTDOWN_TTY", [TTY to use in shutdown mode]) +AC_CHECK_HEADERS([sys/io.h]) +AM_CONDITIONAL([BUILD_VGA16FB], [test "x$ac_cv_header_sys_io_h" = xyes]) + # Turn on the additional warnings last, so -Werror doesn't affect other tests. AC_DEFUN([PLYMOUTH_CC_TRY_FLAG], [ @@ -264,9 +267,11 @@ AC_CONFIG_FILES([Makefile src/plugins/renderers/frame-buffer/Makefile src/plugins/renderers/drm/Makefile src/plugins/renderers/x11/Makefile + src/plugins/renderers/vga16fb/Makefile src/plugins/splash/Makefile src/plugins/splash/throbgress/Makefile src/plugins/splash/fade-throbber/Makefile + src/plugins/splash/ubuntu-text/Makefile src/plugins/splash/text/Makefile src/plugins/splash/details/Makefile src/plugins/splash/space-flares/Makefile @@ -289,6 +294,8 @@ AC_CONFIG_FILES([Makefile themes/solar/Makefile themes/glow/Makefile themes/script/Makefile + themes/ubuntu-logo/Makefile + themes/ubuntu-text/Makefile images/Makefile scripts/plymouth-generate-initrd scripts/plymouth-populate-initrd --- plymouth-0.8.2.orig/INSTALL +++ plymouth-0.8.2/INSTALL @@ -1,91 +1,365 @@ -Plymouth isn't really designed to be built from source and get installed by end users. For it to work correctly, it needs integration with the distribution. Because it starts so early, it needs to be packed into the distribution's initial ram disk, and the distribution needs to poke plymouth to tell it how boot is progressing. +Installation Instructions +************************* -Unfortunately, there isn't great documentation for distributors. In the mean time, this email exchange might be useful: +Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005, +2006, 2007, 2008, 2009 Free Software Foundation, Inc. -Hi, + Copying and distribution of this file, with or without modification, +are permitted in any medium without royalty provided the copyright +notice and this notice are preserved. This file is offered as-is, +without warranty of any kind. + +Basic Installation +================== + + Briefly, the shell commands `./configure; make; make install' should +configure, build, and install this package. The following +more-detailed instructions are generic; see the `README' file for +instructions specific to this package. Some packages provide this +`INSTALL' file but do not implement all of the features documented +below. The lack of an optional feature in a given package is not +necessarily a bug. More recommendations for GNU packages can be found +in *note Makefile Conventions: (standards)Makefile Conventions. + + The `configure' shell script attempts to guess correct values for +various system-dependent variables used during compilation. It uses +those values to create a `Makefile' in each directory of the package. +It may also create one or more `.h' files containing system-dependent +definitions. Finally, it creates a shell script `config.status' that +you can run in the future to recreate the current configuration, and a +file `config.log' containing compiler output (useful mainly for +debugging `configure'). + + It can also use an optional file (typically called `config.cache' +and enabled with `--cache-file=config.cache' or simply `-C') that saves +the results of its tests to speed up reconfiguring. Caching is +disabled by default to prevent problems with accidental use of stale +cache files. + + If you need to do unusual things to compile the package, please try +to figure out how `configure' could check whether to do them, and mail +diffs or instructions to the address given in the `README' so they can +be considered for the next release. If you are using the cache, and at +some point `config.cache' contains results you don't want to keep, you +may remove or edit it. + + The file `configure.ac' (or `configure.in') is used to create +`configure' by a program called `autoconf'. You need `configure.ac' if +you want to change it or regenerate `configure' using a newer version +of `autoconf'. + + The simplest way to compile this package is: + + 1. `cd' to the directory containing the package's source code and type + `./configure' to configure the package for your system. + + Running `configure' might take a while. While running, it prints + some messages telling which features it is checking for. + + 2. Type `make' to compile the package. + + 3. Optionally, type `make check' to run any self-tests that come with + the package, generally using the just-built uninstalled binaries. + + 4. Type `make install' to install the programs and any data files and + documentation. When installing into a prefix owned by root, it is + recommended that the package be configured and built as a regular + user, and only the `make install' phase executed with root + privileges. + + 5. Optionally, type `make installcheck' to repeat any self-tests, but + this time using the binaries in their final installed location. + This target does not install anything. Running this target as a + regular user, particularly if the prior `make install' required + root privileges, verifies that the installation completed + correctly. + + 6. You can remove the program binaries and object files from the + source code directory by typing `make clean'. To also remove the + files that `configure' created (so you can compile the package for + a different kind of computer), type `make distclean'. There is + also a `make maintainer-clean' target, but that is intended mainly + for the package's developers. If you use it, you may have to get + all sorts of other programs in order to regenerate files that came + with the distribution. + + 7. Often, you can also type `make uninstall' to remove the installed + files again. In practice, not all packages have tested that + uninstallation works correctly, even though it is required by the + GNU Coding Standards. + + 8. Some packages, particularly those that use Automake, provide `make + distcheck', which can by used by developers to test that all other + targets like `make install' and `make uninstall' work correctly. + This target is generally not run by end users. + +Compilers and Options +===================== + + Some systems require unusual options for compilation or linking that +the `configure' script does not know about. Run `./configure --help' +for details on some of the pertinent environment variables. + + You can give `configure' initial values for configuration parameters +by setting variables in the command line or in the environment. Here +is an example: + + ./configure CC=c99 CFLAGS=-g LIBS=-lposix + + *Note Defining Variables::, for more details. + +Compiling For Multiple Architectures +==================================== + + You can compile the package for more than one kind of computer at the +same time, by placing the object files for each architecture in their +own directory. To do this, you can use GNU `make'. `cd' to the +directory where you want the object files and executables to go and run +the `configure' script. `configure' automatically checks for the +source code in the directory that `configure' is in and in `..'. This +is known as a "VPATH" build. + + With a non-GNU `make', it is safer to compile the package for one +architecture at a time in the source code directory. After you have +installed the package for one architecture, use `make distclean' before +reconfiguring for another architecture. + + On MacOS X 10.5 and later systems, you can create libraries and +executables that work on multiple system types--known as "fat" or +"universal" binaries--by specifying multiple `-arch' options to the +compiler but only a single `-arch' option to the preprocessor. Like +this: + + ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ + CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ + CPP="gcc -E" CXXCPP="g++ -E" + + This is not guaranteed to produce working output in all cases, you +may have to build one architecture at a time and combine the results +using the `lipo' tool if you have problems. + +Installation Names +================== + + By default, `make install' installs the package's commands under +`/usr/local/bin', include files under `/usr/local/include', etc. You +can specify an installation prefix other than `/usr/local' by giving +`configure' the option `--prefix=PREFIX', where PREFIX must be an +absolute file name. + + You can specify separate installation prefixes for +architecture-specific files and architecture-independent files. If you +pass the option `--exec-prefix=PREFIX' to `configure', the package uses +PREFIX as the prefix for installing programs and libraries. +Documentation and other data files still use the regular prefix. + + In addition, if you use an unusual directory layout you can give +options like `--bindir=DIR' to specify different values for particular +kinds of files. Run `configure --help' for a list of the directories +you can set and what kinds of files go in them. In general, the +default for these options is expressed in terms of `${prefix}', so that +specifying just `--prefix' will affect all of the other directory +specifications that were not explicitly provided. + + The most portable way to affect installation locations is to pass the +correct locations to `configure'; however, many packages provide one or +both of the following shortcuts of passing variable assignments to the +`make install' command line to change installation locations without +having to reconfigure or recompile. + + The first method involves providing an override variable for each +affected directory. For example, `make install +prefix=/alternate/directory' will choose an alternate location for all +directory configuration variables that were expressed in terms of +`${prefix}'. Any directories that were specified during `configure', +but not in terms of `${prefix}', must each be overridden at install +time for the entire installation to be relocated. The approach of +makefile variable overrides for each directory variable is required by +the GNU Coding Standards, and ideally causes no recompilation. +However, some platforms have known limitations with the semantics of +shared libraries that end up requiring recompilation when using this +method, particularly noticeable in packages that use GNU Libtool. + + The second method involves providing the `DESTDIR' variable. For +example, `make install DESTDIR=/alternate/directory' will prepend +`/alternate/directory' before all installation names. The approach of +`DESTDIR' overrides is not required by the GNU Coding Standards, and +does not work on platforms that have drive letters. On the other hand, +it does better at avoiding recompilation issues, and works well even +when some directory options were not specified in terms of `${prefix}' +at `configure' time. + +Optional Features +================= + + If the package supports it, you can cause programs to be installed +with an extra prefix or suffix on their names by giving `configure' the +option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. + + Some packages pay attention to `--enable-FEATURE' options to +`configure', where FEATURE indicates an optional part of the package. +They may also pay attention to `--with-PACKAGE' options, where PACKAGE +is something like `gnu-as' or `x' (for the X Window System). The +`README' should mention any `--enable-' and `--with-' options that the +package recognizes. + + For packages that use the X Window System, `configure' can usually +find the X include and library files automatically, but if it doesn't, +you can use the `configure' options `--x-includes=DIR' and +`--x-libraries=DIR' to specify their locations. + + Some packages offer the ability to configure how verbose the +execution of `make' will be. For these packages, running `./configure +--enable-silent-rules' sets the default to minimal output, which can be +overridden with `make V=1'; while running `./configure +--disable-silent-rules' sets the default to verbose, which can be +overridden with `make V=0'. + +Particular systems +================== + + On HP-UX, the default C compiler is not ANSI C compatible. If GNU +CC is not installed, it is recommended to use the following options in +order to use an ANSI C compiler: + + ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" + +and if that doesn't work, install pre-built binaries of GCC for HP-UX. + + On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot +parse its `' header file. The option `-nodtk' can be used as +a workaround. If GNU CC is not installed, it is therefore recommended +to try + + ./configure CC="cc" + +and if that doesn't work, try + + ./configure CC="cc -nodtk" + + On Solaris, don't put `/usr/ucb' early in your `PATH'. This +directory contains several dysfunctional programs; working variants of +these programs are available in `/usr/bin'. So, if you need `/usr/ucb' +in your `PATH', put it _after_ `/usr/bin'. + + On Haiku, software installed for all users goes in `/boot/common', +not `/usr/local'. It is recommended to use the following options: + + ./configure --prefix=/boot/common + +Specifying the System Type +========================== + + There may be some features `configure' cannot figure out +automatically, but needs to determine by the type of machine the package +will run on. Usually, assuming the package is built to be run on the +_same_ architectures, `configure' can figure that out, but if it prints +a message saying it cannot guess the machine type, give it the +`--build=TYPE' option. TYPE can either be a short name for the system +type, such as `sun4', or a canonical name which has the form: + + CPU-COMPANY-SYSTEM + +where SYSTEM can have one of these forms: + + OS + KERNEL-OS + + See the file `config.sub' for the possible values of each field. If +`config.sub' isn't included in this package, then this package doesn't +need to know the machine type. + + If you are _building_ compiler tools for cross-compiling, you should +use the option `--target=TYPE' to select the type of system they will +produce code for. + + If you want to _use_ a cross compiler, that generates code for a +platform different from the build platform, you should specify the +"host" platform (i.e., that on which the generated programs will +eventually be run) with `--host=TYPE'. + +Sharing Defaults +================ + + If you want to set default values for `configure' scripts to share, +you can create a site shell script called `config.site' that gives +default values for variables like `CC', `cache_file', and `prefix'. +`configure' looks for `PREFIX/share/config.site' if it exists, then +`PREFIX/etc/config.site' if it exists. Or, you can set the +`CONFIG_SITE' environment variable to the location of the site script. +A warning: not all `configure' scripts look for a site script. + +Defining Variables +================== + + Variables not defined in a site shell script can be set in the +environment passed to `configure'. However, some packages may run +configure again during the build, and the customized values of these +variables may be lost. In order to avoid this problem, you should set +them in the `configure' command line, using `VAR=value'. For example: + + ./configure CC=/usr/local2/bin/gcc + +causes the specified `gcc' to be used as the C compiler (unless it is +overridden in the site shell script). + +Unfortunately, this technique does not work for `CONFIG_SHELL' due to +an Autoconf bug. Until the bug is fixed you can use this workaround: + + CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash + +`configure' Invocation +====================== + + `configure' recognizes the following options to control how it +operates. + +`--help' +`-h' + Print a summary of all of the options to `configure', and exit. + +`--help=short' +`--help=recursive' + Print a summary of the options unique to this package's + `configure', and exit. The `short' variant lists options used + only in the top level, while the `recursive' variant lists options + also present in any nested packages. + +`--version' +`-V' + Print the version of Autoconf used to generate the `configure' + script, and exit. + +`--cache-file=FILE' + Enable the cache: use and save the results of the tests in FILE, + traditionally `config.cache'. FILE defaults to `/dev/null' to + disable caching. + +`--config-cache' +`-C' + Alias for `--cache-file=config.cache'. + +`--quiet' +`--silent' +`-q' + Do not print messages saying which checks are being made. To + suppress all normal output, redirect it to `/dev/null' (any error + messages will still be shown). + +`--srcdir=DIR' + Look for the package's source code in directory DIR. Usually + `configure' can determine that directory automatically. + +`--prefix=DIR' + Use DIR as the installation prefix. *note Installation Names:: + for more details, including other options available for fine-tuning + the installation locations. + +`--no-create' +`-n' + Run the configure checks, but stop before creating any output + files. -> I recently found a video showing Fedora booting with plymouth and I -> liked it. So I wanted to use plymouth with my favorite distri (gentoo). -> I know I'm enduser and the info text on freedesktop.org says plymouth -> is not meant to be installed by end users but I want to give it a try. -> I have KMS running and am using my own initramfs anyway (encrypted root -> disk) so how hard can it be? Can anybody please give me some straight -> forward hints on how to use plymouth? (The INSTALL file is empty and -> the README file is boring) +`configure' also accepts some other, not widely useful, options. Run +`configure --help' for more details. -So the basic idea is you need to: - -1) build plymouth into the system. On fedora we use these conffigure flags: - -.%configure --enable-tracing --disable-tests --without-boot-entry \ - --without-default-plugin \ - --with-logo=%{_datadir}/pixmaps/system-logo-white.png \ - --with-background-start-color-stop=0x0073B3 \ - --with-background-end-color-stop=0x00457E \ - --with-background-color=0x3391cd \ - --enable-gdm-transition \ - --with-system-root-install \ - --with-rhgb-compat-link - -%configure is a macro that expands to: - -./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var - -(and some other stuff) - -%{_datadir} is just /usr/share - -You probably won't need --with-rhgb-compat-link since that's only -there for compatibility with Fedora's old infrastructure. - ---with-system-root-install makes plymouthd and plymouth install -themselves into / instead of /usr. This is important so that the -plymouth client can work in cases where the root fs is mounted, but -/usr isn't yet. - -Somehow you need to hook into your distros mkinitrd mechanism. I -mean you need to copy the plymouth binaries, plugins, and data files -into the initrd everytime you rebuild your initrd. See -plymouth-populate-initrd for how we do it on fedora (mkinitrd calls -plymouth-populate-initrd). I would like to upstream hooks for other -distros mkinitrd systems, so the out of the box experience is easier. - -Inside the initrd, you need to start plymouthd early. The earlier the -better, but not before /sys, /proc/, and /dev/pts are mounted, and -not before /dev/tty[01] and /dev/fb0 are created. - -At some point during the initrd you need to load the kms driver. -After it's loaded the graphics mode should get set up and /dev/fb0 -will be functional. That's when you call plymouth --show-splash to -show the splash screen. - -To decrypt your root, run - -lymouth ask-for-password --command="/sbin/cryptsetup luksOpen -T ..." - -where the --command is whatever makes sense for you. - -Right after you mount the root file system (but before you switch to it), run - -plymouth --newroot=/wherevertherootismounted - -This tells plymouth it can load some files off the real filesystem -(like fonts, and stuff we don't want to stick in the initrd). - -while boot you need to run plymouth --update=some-milestone-id - -periodically to update the progress bar. - -When / is mounted read-write you need to run - -plymouth --sysinit - -Finally, when plymouth is done, you need to run plymouth --quit - -I have to run to catch a bus but i think that's the basics. - -> I'm even willing to give something back and convert your hints -> into an easy step by step howto. -That'd be great! - ---Ray --- plymouth-0.8.2.orig/configure +++ plymouth-0.8.2/configure @@ -1,20 +1,24 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.63 for plymouth 0.8.2. +# Generated by GNU Autoconf 2.65 for plymouth 0.8.2. # # Report bugs to . # +# # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. +# +# # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which @@ -22,23 +26,15 @@ if test -n "${ZSH_VERSION+set}" && (emul alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else - case `(set -o) 2>/dev/null` in - *posix*) set -o posix ;; + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; esac - fi - - -# PATH needs CR -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - as_nl=' ' export as_nl @@ -46,7 +42,13 @@ export as_nl as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else @@ -57,7 +59,7 @@ else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; - case $arg in + case $arg in #( *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; @@ -80,13 +82,6 @@ if test "${PATH_SEPARATOR+set}" != set; } fi -# Support unset when possible. -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false -fi - # IFS # We need space, tab and new line, in precisely that order. Quoting is @@ -96,15 +91,15 @@ fi IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. -case $0 in +case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done IFS=$as_save_IFS ;; @@ -116,12 +111,16 @@ if test "x$as_myself" = x; then fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - { (exit 1); exit 1; } + exit 1 fi -# Work around bugs in pre-3.0 UWIN ksh. -for as_var in ENV MAIL MAILPATH -do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' @@ -133,330 +132,301 @@ export LC_ALL LANGUAGE=C export LANGUAGE -# Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - - -# Name of the executable. -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - # CDPATH. -$as_unset CDPATH - +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH if test "x$CONFIG_SHELL" = x; then - if (eval ":") 2>/dev/null; then - as_have_required=yes + as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST else - as_have_required=no + case \`(set -o) 2>/dev/null\` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac fi - - if test $as_have_required = yes && (eval ": -(as_func_return () { - (exit \$1) -} -as_func_success () { - as_func_return 0 -} -as_func_failure () { - as_func_return 1 -} -as_func_ret_success () { - return 0 -} -as_func_ret_failure () { - return 1 -} +" + as_required="as_fn_return () { (exit \$1); } +as_fn_success () { as_fn_return 0; } +as_fn_failure () { as_fn_return 1; } +as_fn_ret_success () { return 0; } +as_fn_ret_failure () { return 1; } exitcode=0 -if as_func_success; then - : -else - exitcode=1 - echo as_func_success failed. -fi - -if as_func_failure; then - exitcode=1 - echo as_func_failure succeeded. -fi - -if as_func_ret_success; then - : -else - exitcode=1 - echo as_func_ret_success failed. -fi - -if as_func_ret_failure; then - exitcode=1 - echo as_func_ret_failure succeeded. -fi - -if ( set x; as_func_ret_success y && test x = \"\$1\" ); then - : +as_fn_success || { exitcode=1; echo as_fn_success failed.; } +as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } +as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } +as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } +if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : + +else + exitcode=1; echo positional parameters were not saved. +fi +test x\$exitcode = x0 || exit 1" + as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO + as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO + eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && + test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 +test \$(( 1 + 1 )) = 2 || exit 1" + if (eval "$as_required") 2>/dev/null; then : + as_have_required=yes else - exitcode=1 - echo positional parameters were not saved. + as_have_required=no fi + if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : -test \$exitcode = 0) || { (exit 1); exit 1; } - -( - as_lineno_1=\$LINENO - as_lineno_2=\$LINENO - test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && - test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } -") 2> /dev/null; then - : else - as_candidate_shells= - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +as_found=false for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - case $as_dir in + as_found=: + case $as_dir in #( /*) for as_base in sh bash ksh sh5; do - as_candidate_shells="$as_candidate_shells $as_dir/$as_base" + # Try only shells that exist, to save several forks. + as_shell=$as_dir/$as_base + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : + CONFIG_SHELL=$as_shell as_have_required=yes + if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : + break 2 +fi +fi done;; esac + as_found=false done +$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : + CONFIG_SHELL=$SHELL as_have_required=yes +fi; } IFS=$as_save_IFS - for as_shell in $as_candidate_shells $SHELL; do - # Try only shells that exist, to save several forks. - if { test -f "$as_shell" || test -f "$as_shell.exe"; } && - { ("$as_shell") 2> /dev/null <<\_ASEOF -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in - *posix*) set -o posix ;; -esac - -fi - - -: -_ASEOF -}; then - CONFIG_SHELL=$as_shell - as_have_required=yes - if { "$as_shell" 2> /dev/null <<\_ASEOF -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in - *posix*) set -o posix ;; -esac - -fi - - -: -(as_func_return () { - (exit $1) -} -as_func_success () { - as_func_return 0 -} -as_func_failure () { - as_func_return 1 -} -as_func_ret_success () { - return 0 -} -as_func_ret_failure () { - return 1 -} - -exitcode=0 -if as_func_success; then - : -else - exitcode=1 - echo as_func_success failed. -fi - -if as_func_failure; then - exitcode=1 - echo as_func_failure succeeded. -fi - -if as_func_ret_success; then - : -else - exitcode=1 - echo as_func_ret_success failed. -fi - -if as_func_ret_failure; then - exitcode=1 - echo as_func_ret_failure succeeded. -fi - -if ( set x; as_func_ret_success y && test x = "$1" ); then - : -else - exitcode=1 - echo positional parameters were not saved. -fi - -test $exitcode = 0) || { (exit 1); exit 1; } - -( - as_lineno_1=$LINENO - as_lineno_2=$LINENO - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } - -_ASEOF -}; then - break -fi - -fi - - done - - if test "x$CONFIG_SHELL" != x; then - for as_var in BASH_ENV ENV - do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var - done + if test "x$CONFIG_SHELL" != x; then : + # We cannot yet assume a decent shell, so we have to provide a + # neutralization value for shells without unset; and this also + # works around shells that cannot unset nonexistent variables. + BASH_ENV=/dev/null + ENV=/dev/null + (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV export CONFIG_SHELL exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} fi - - if test $as_have_required = no; then - echo This script requires a shell more modern than all the - echo shells that I found on your system. Please install a - echo modern shell, or manually run the script under such a - echo shell if you do have one. - { (exit 1); exit 1; } + if test x$as_have_required = xno; then : + $as_echo "$0: This script requires a shell more modern than all" + $as_echo "$0: the shells that I found on your system." + if test x${ZSH_VERSION+set} = xset ; then + $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" + $as_echo "$0: be upgraded to zsh 4.3.4 or later." + else + $as_echo "$0: Please tell bug-autoconf@gnu.org and +$0: https://bugs.freedesktop.org/enter_bug.cgi?product=plymouth +$0: about your system, including any error possibly output +$0: before this message. Then install a modern shell, or +$0: manually run the script under such a shell if you do +$0: have one." + fi + exit 1 fi - - fi - fi +SHELL=${CONFIG_SHELL-/bin/sh} +export SHELL +# Unset more variables known to interfere with behavior of common tools. +CLICOLOR_FORCE= GREP_OPTIONS= +unset CLICOLOR_FORCE GREP_OPTIONS +## --------------------- ## +## M4sh Shell Functions. ## +## --------------------- ## +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir" -(eval "as_func_return () { - (exit \$1) -} -as_func_success () { - as_func_return 0 -} -as_func_failure () { - as_func_return 1 -} -as_func_ret_success () { - return 0 -} -as_func_ret_failure () { - return 1 -} -exitcode=0 -if as_func_success; then - : +} # as_fn_mkdir_p +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' else - exitcode=1 - echo as_func_success failed. -fi + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append -if as_func_failure; then - exitcode=1 - echo as_func_failure succeeded. -fi +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith -if as_func_ret_success; then - : + +# as_fn_error ERROR [LINENO LOG_FD] +# --------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with status $?, using 1 if that was 0. +as_fn_error () +{ + as_status=$?; test $as_status -eq 0 && as_status=1 + if test "$3"; then + as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3 + fi + $as_echo "$as_me: error: $1" >&2 + as_fn_exit $as_status +} # as_fn_error + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr else - exitcode=1 - echo as_func_ret_success failed. + as_expr=false fi -if as_func_ret_failure; then - exitcode=1 - echo as_func_ret_failure succeeded. +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false fi -if ( set x; as_func_ret_success y && test x = \"\$1\" ); then - : +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname else - exitcode=1 - echo positional parameters were not saved. + as_dirname=false fi -test \$exitcode = 0") || { - echo No shell found that supports shell functions. - echo Please tell bug-autoconf@gnu.org about your system, - echo including any error possibly output before this message. - echo This can help us improve future autoconf versions. - echo Configuration will now proceed without shell functions. -} +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits - as_lineno_1=$LINENO - as_lineno_2=$LINENO - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line after each line using $LINENO; the second 'sed' - # does the real work. The second script uses 'N' to pair each - # line-number line with the line containing $LINENO, and appends - # trailing '-' during substitution so that $LINENO is not a special - # case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # scripts with optimization help from Paolo Bonzini. Blame Lee - # E. McMahon (1931-1989) for sed's syntax. :-) + as_lineno_1=$LINENO as_lineno_1a=$LINENO + as_lineno_2=$LINENO as_lineno_2a=$LINENO + eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && + test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { + # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) sed -n ' p /[$]LINENO/= @@ -473,8 +443,7 @@ test \$exitcode = 0") || { s/-\n.*// ' >$as_me.lineno && chmod +x "$as_me.lineno" || - { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 - { (exit 1); exit 1; }; } + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the @@ -484,29 +453,18 @@ test \$exitcode = 0") || { exit } - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in +case `echo -n x` in #((((( -n*) - case `echo 'x\c'` in + case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. - *) ECHO_C='\c';; + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then @@ -536,7 +494,7 @@ rm -f conf$$ conf$$.exe conf$$.dir/conf$ rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then - as_mkdir_p=: + as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false @@ -555,10 +513,10 @@ else if test -d "$1"; then test -d "$1/."; else - case $1 in + case $1 in #( -*)set "./$1";; esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( ???[sx]*):;;*)false;;esac;fi '\'' sh ' @@ -573,7 +531,6 @@ as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr - # Check that we are running under the correct shell. SHELL=${CONFIG_SHELL-/bin/sh} @@ -722,7 +679,8 @@ fi -exec 7<&0 &1 +test -n "$DJDIR" || exec 7<&0 &1 # Name of the host. # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, @@ -740,7 +698,6 @@ cross_compiling=no subdirs= MFLAGS= MAKEFLAGS= -SHELL=${CONFIG_SHELL-/bin/sh} # Identity of this package. PACKAGE_NAME='plymouth' @@ -748,6 +705,7 @@ PACKAGE_TARNAME='plymouth' PACKAGE_VERSION='0.8.2' PACKAGE_STRING='plymouth 0.8.2' PACKAGE_BUGREPORT='https://bugs.freedesktop.org/enter_bug.cgi?product=plymouth' +PACKAGE_URL='' ac_unique_file="src/main.c" # Factoring default headers for most tests. @@ -797,6 +755,8 @@ PLYMOUTH_CONF_DIR PLYMOUTH_POLICY_DIR PLYMOUTH_PLUGIN_PATH PLYMOUTH_THEME_PATH +BUILD_VGA16FB_FALSE +BUILD_VGA16FB_TRUE RELEASE_FILE background_end_color background_start_color @@ -932,6 +892,7 @@ bindir program_transform_name prefix exec_prefix +PACKAGE_URL PACKAGE_BUGREPORT PACKAGE_STRING PACKAGE_VERSION @@ -1093,8 +1054,7 @@ do ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2 - { (exit 1); exit 1; }; } + as_fn_error "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in @@ -1120,8 +1080,7 @@ do ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2 - { (exit 1); exit 1; }; } + as_fn_error "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in @@ -1325,8 +1284,7 @@ do ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2 - { (exit 1); exit 1; }; } + as_fn_error "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in @@ -1342,8 +1300,7 @@ do ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2 - { (exit 1); exit 1; }; } + as_fn_error "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in @@ -1373,17 +1330,17 @@ do | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; - -*) { $as_echo "$as_me: error: unrecognized option: $ac_option -Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; } + -*) as_fn_error "unrecognized option: \`$ac_option' +Try \`$0 --help' for more information." ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. - expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && - { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2 - { (exit 1); exit 1; }; } + case $ac_envvar in #( + '' | [0-9]* | *[!_$as_cr_alnum]* ) + as_fn_error "invalid variable name: \`$ac_envvar'" ;; + esac eval $ac_envvar=\$ac_optarg export $ac_envvar ;; @@ -1400,15 +1357,13 @@ done if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` - { $as_echo "$as_me: error: missing argument to $ac_option" >&2 - { (exit 1); exit 1; }; } + as_fn_error "missing argument to $ac_option" fi if test -n "$ac_unrecognized_opts"; then case $enable_option_checking in no) ;; - fatal) { $as_echo "$as_me: error: unrecognized options: $ac_unrecognized_opts" >&2 - { (exit 1); exit 1; }; } ;; + fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;; *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; esac fi @@ -1431,8 +1386,7 @@ do [\\/$]* | ?:[\\/]* ) continue;; NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac - { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 - { (exit 1); exit 1; }; } + as_fn_error "expected an absolute directory name for --$ac_var: $ac_val" done # There might be people who depend on the old broken behavior: `$host' @@ -1462,11 +1416,9 @@ test "$silent" = yes && exec 6>/dev/null ac_pwd=`pwd` && test -n "$ac_pwd" && ac_ls_di=`ls -di .` && ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || - { $as_echo "$as_me: error: working directory cannot be determined" >&2 - { (exit 1); exit 1; }; } + as_fn_error "working directory cannot be determined" test "X$ac_ls_di" = "X$ac_pwd_ls_di" || - { $as_echo "$as_me: error: pwd does not report name of working directory" >&2 - { (exit 1); exit 1; }; } + as_fn_error "pwd does not report name of working directory" # Find the source files, if location was not specified. @@ -1505,13 +1457,11 @@ else fi if test ! -r "$srcdir/$ac_unique_file"; then test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." - { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 - { (exit 1); exit 1; }; } + as_fn_error "cannot find sources ($ac_unique_file) in $srcdir" fi ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ac_abs_confdir=`( - cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2 - { (exit 1); exit 1; }; } + cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg" pwd)` # When building in place, set srcdir=. if test "$ac_abs_confdir" = "$ac_pwd"; then @@ -1666,7 +1616,7 @@ Some influential environment variables: LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory LIBS libraries to pass to the linker, e.g. -l - CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I if + CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if you have headers in a nonstandard directory CPP C preprocessor PKG_CONFIG path to pkg-config utility @@ -1729,40 +1679,397 @@ case $srcdir in esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - cd "$ac_dir" || { ac_status=$?; continue; } - # Check for guested configure. - if test -f "$ac_srcdir/configure.gnu"; then - echo && - $SHELL "$ac_srcdir/configure.gnu" --help=recursive - elif test -f "$ac_srcdir/configure"; then - echo && - $SHELL "$ac_srcdir/configure" --help=recursive - else - $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi || ac_status=$? - cd "$ac_pwd" || { ac_status=$?; break; } - done + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for guested configure. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive + else + $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } + done +fi + +test -n "$ac_init_help" && exit $ac_status +if $ac_init_version; then + cat <<\_ACEOF +plymouth configure 0.8.2 +generated by GNU Autoconf 2.65 + +Copyright (C) 2009 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit +fi + +## ------------------------ ## +## Autoconf initialization. ## +## ------------------------ ## + +# ac_fn_c_try_compile LINENO +# -------------------------- +# Try to compile conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext + if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + as_fn_set_status $ac_retval + +} # ac_fn_c_try_compile + +# ac_fn_c_try_cpp LINENO +# ---------------------- +# Try to preprocess conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_cpp () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + as_fn_set_status $ac_retval + +} # ac_fn_c_try_cpp + +# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists, giving a warning if it cannot be compiled using +# the include files in INCLUDES and setting the cache variable VAR +# accordingly. +ac_fn_c_check_header_mongrel () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : + $as_echo_n "(cached) " >&6 +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +else + # Is the header compilable? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 +$as_echo_n "checking $2 usability... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_header_compiler=yes +else + ac_header_compiler=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 +$as_echo "$ac_header_compiler" >&6; } + +# Is the header present? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 +$as_echo_n "checking $2 presence... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include <$2> +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + ac_header_preproc=yes +else + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 +$as_echo "$ac_header_preproc" >&6; } + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( + yes:no: ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 +$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} + ;; + no:yes:* ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 +$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 +$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 +$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 +$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} +( cat <<\_ASBOX +## -------------------------------------------------------------------------- ## +## Report this to https://bugs.freedesktop.org/enter_bug.cgi?product=plymouth ## +## -------------------------------------------------------------------------- ## +_ASBOX + ) | sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : + $as_echo_n "(cached) " >&6 +else + eval "$3=\$ac_header_compiler" +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +fi + eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + +} # ac_fn_c_check_header_mongrel + +# ac_fn_c_try_run LINENO +# ---------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes +# that executables *can* be run. +ac_fn_c_try_run () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then : + ac_retval=0 +else + $as_echo "$as_me: program exited with status $ac_status" >&5 + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=$ac_status +fi + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + as_fn_set_status $ac_retval + +} # ac_fn_c_try_run + +# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists and can be compiled using the include files in +# INCLUDES, setting the cache variable VAR accordingly. +ac_fn_c_check_header_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + +} # ac_fn_c_check_header_compile + +# ac_fn_c_try_link LINENO +# ----------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_link () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext conftest$ac_exeext + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 fi + # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information + # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would + # interfere with the next link command; also delete a directory that is + # left behind by Apple's compiler. We do this before executing the actions. + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + as_fn_set_status $ac_retval -test -n "$ac_init_help" && exit $ac_status -if $ac_init_version; then - cat <<\_ACEOF -plymouth configure 0.8.2 -generated by GNU Autoconf 2.63 +} # ac_fn_c_try_link -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. -This configure script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it. +# ac_fn_c_check_func LINENO FUNC VAR +# ---------------------------------- +# Tests whether FUNC exists, setting the cache variable VAR accordingly +ac_fn_c_check_func () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +/* Define $2 to an innocuous variant, in case declares $2. + For example, HP-UX 11i declares gettimeofday. */ +#define $2 innocuous_$2 + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $2 (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef $2 + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $2 (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$2 || defined __stub___$2 +choke me +#endif + +int +main () +{ +return $2 (); + ; + return 0; +} _ACEOF - exit +if ac_fn_c_try_link "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + +} # ac_fn_c_check_func cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by plymouth $as_me 0.8.2, which was -generated by GNU Autoconf 2.63. Invocation command line was +generated by GNU Autoconf 2.65. Invocation command line was $ $0 $@ @@ -1798,8 +2105,8 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - $as_echo "PATH: $as_dir" -done + $as_echo "PATH: $as_dir" + done IFS=$as_save_IFS } >&5 @@ -1836,9 +2143,9 @@ do ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in - 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; + 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; 2) - ac_configure_args1="$ac_configure_args1 '$ac_arg'" + as_fn_append ac_configure_args1 " '$ac_arg'" if test $ac_must_keep_next = true; then ac_must_keep_next=false # Got value, back to normal. else @@ -1854,13 +2161,13 @@ do -* ) ac_must_keep_next=true ;; esac fi - ac_configure_args="$ac_configure_args '$ac_arg'" + as_fn_append ac_configure_args " '$ac_arg'" ;; esac done done -$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } -$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } +{ ac_configure_args0=; unset ac_configure_args0;} +{ ac_configure_args1=; unset ac_configure_args1;} # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there @@ -1885,13 +2192,13 @@ _ASBOX case $ac_val in #( *${as_nl}*) case $ac_var in #( - *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5 + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) $as_unset $ac_var ;; + *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done @@ -1963,39 +2270,41 @@ _ASBOX exit $exit_status ' 0 for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal + trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -f -r conftest* confdefs.h +$as_echo "/* confdefs.h */" > confdefs.h + # Predefined preprocessor variables. cat >>confdefs.h <<_ACEOF #define PACKAGE_NAME "$PACKAGE_NAME" _ACEOF - cat >>confdefs.h <<_ACEOF #define PACKAGE_TARNAME "$PACKAGE_TARNAME" _ACEOF - cat >>confdefs.h <<_ACEOF #define PACKAGE_VERSION "$PACKAGE_VERSION" _ACEOF - cat >>confdefs.h <<_ACEOF #define PACKAGE_STRING "$PACKAGE_STRING" _ACEOF - cat >>confdefs.h <<_ACEOF #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" _ACEOF +cat >>confdefs.h <<_ACEOF +#define PACKAGE_URL "$PACKAGE_URL" +_ACEOF + # Let the site file select an alternate cache file if it wants to. # Prefer an explicitly selected file to automatically selected ones. @@ -2013,8 +2322,8 @@ fi for ac_site_file in "$ac_site_file1" "$ac_site_file2" do test "x$ac_site_file" = xNONE && continue - if test -r "$ac_site_file"; then - { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 + if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 $as_echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" @@ -2022,10 +2331,10 @@ $as_echo "$as_me: loading site script $a done if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special - # files actually), so we avoid doing that. - if test -f "$cache_file"; then - { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5 + # Some versions of bash will fail to source /dev/null (special files + # actually), so we avoid doing that. DJGPP emulates it as a regular file. + if test /dev/null != "$cache_file" && test -f "$cache_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 $as_echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in [\\/]* | ?:[\\/]* ) . "$cache_file";; @@ -2033,7 +2342,7 @@ $as_echo "$as_me: loading cache $cache_f esac fi else - { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 $as_echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi @@ -2048,11 +2357,11 @@ for ac_var in $ac_precious_vars; do eval ac_new_val=\$ac_env_${ac_var}_value case $ac_old_set,$ac_new_set in set,) - { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) - { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; @@ -2062,17 +2371,17 @@ $as_echo "$as_me: error: \`$ac_var' was ac_old_val_w=`echo x $ac_old_val` ac_new_val_w=`echo x $ac_new_val` if test "$ac_old_val_w" != "$ac_new_val_w"; then - { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 $as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ac_cache_corrupted=: else - { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 $as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} eval $ac_var=\$ac_old_val fi - { $as_echo "$as_me:$LINENO: former value: \`$ac_old_val'" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 $as_echo "$as_me: former value: \`$ac_old_val'" >&2;} - { $as_echo "$as_me:$LINENO: current value: \`$ac_new_val'" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 $as_echo "$as_me: current value: \`$ac_new_val'" >&2;} fi;; esac @@ -2084,43 +2393,20 @@ $as_echo "$as_me: current value: \`$ac esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; + *) as_fn_append ac_configure_args " '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then - { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} - { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 $as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} - { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 -$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} - { (exit 1); exit 1; }; } + as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 fi - - - - - - - - - - - - - - - - - - - - - - - - +## -------------------- ## +## Main body of script. ## +## -------------------- ## ac_ext=c ac_cpp='$CPP $CPPFLAGS' @@ -2134,24 +2420,16 @@ ac_config_headers="$ac_config_headers co ac_aux_dir= for ac_dir in build-tools "$srcdir"/build-tools; do - if test -f "$ac_dir/install-sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break - elif test -f "$ac_dir/install.sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break - elif test -f "$ac_dir/shtool"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/shtool install -c" - break - fi + for ac_t in install-sh install.sh shtool; do + if test -f "$ac_dir/$ac_t"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/$ac_t -c" + break 2 + fi + done done if test -z "$ac_aux_dir"; then - { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in build-tools \"$srcdir\"/build-tools" >&5 -$as_echo "$as_me: error: cannot find install-sh or install.sh in build-tools \"$srcdir\"/build-tools" >&2;} - { (exit 1); exit 1; }; } + as_fn_error "cannot find install-sh, install.sh, or shtool in build-tools \"$srcdir\"/build-tools" "$LINENO" 5 fi # These three variables are undocumented and unsupported, @@ -2172,9 +2450,9 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_CC+set}" = set; then +if test "${ac_cv_prog_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then @@ -2185,24 +2463,24 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}gcc" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - { $as_echo "$as_me:$LINENO: result: $CC" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -2212,9 +2490,9 @@ if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then @@ -2225,24 +2503,24 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="gcc" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -2251,7 +2529,7 @@ fi else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac @@ -2265,9 +2543,9 @@ if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_CC+set}" = set; then +if test "${ac_cv_prog_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then @@ -2278,24 +2556,24 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}cc" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - { $as_echo "$as_me:$LINENO: result: $CC" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -2305,9 +2583,9 @@ fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_CC+set}" = set; then +if test "${ac_cv_prog_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then @@ -2319,18 +2597,18 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS if test $ac_prog_rejected = yes; then @@ -2349,10 +2627,10 @@ fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - { $as_echo "$as_me:$LINENO: result: $CC" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -2364,9 +2642,9 @@ if test -z "$CC"; then do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_CC+set}" = set; then +if test "${ac_cv_prog_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then @@ -2377,24 +2655,24 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - { $as_echo "$as_me:$LINENO: result: $CC" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -2408,9 +2686,9 @@ if test -z "$CC"; then do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then @@ -2421,24 +2699,24 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="$ac_prog" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -2451,7 +2729,7 @@ done else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac @@ -2462,57 +2740,37 @@ fi fi -test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; }; } +as_fn_error "no acceptable C compiler found in \$PATH +See \`config.log' for more details." "$LINENO" 5; } # Provide some information about the compiler. -$as_echo "$as_me:$LINENO: checking for C compiler version" >&5 +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 set X $ac_compile ac_compiler=$2 -{ (ac_try="$ac_compiler --version >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compiler --version >&5") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (ac_try="$ac_compiler -v >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compiler -v >&5") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (ac_try="$ac_compiler -V >&5" +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compiler -V >&5") 2>&5 +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -2528,8 +2786,8 @@ ac_clean_files="$ac_clean_files a.out a. # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. -{ $as_echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 -$as_echo_n "checking for C compiler default output file name... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 +$as_echo_n "checking whether the C compiler works... " >&6; } ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` # The possible output files: @@ -2545,17 +2803,17 @@ do done rm -f $ac_rmfiles -if { (ac_try="$ac_link_default" +if { { ac_try="$ac_link_default" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 (eval "$ac_link_default") 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. # So ignore a value of `no', otherwise this would lead to `EXEEXT = no' # in a Makefile. We should not override ac_cv_exeext if it was cached, @@ -2572,7 +2830,7 @@ do # certainly right. break;; *.* ) - if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; then :; else ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` fi @@ -2591,84 +2849,42 @@ test "$ac_cv_exeext" = no && ac_cv_exeex else ac_file='' fi - -{ $as_echo "$as_me:$LINENO: result: $ac_file" >&5 -$as_echo "$ac_file" >&6; } -if test -z "$ac_file"; then - $as_echo "$as_me: failed program was:" >&5 +if test -z "$ac_file"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +$as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: C compiler cannot create executables -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: C compiler cannot create executables -See \`config.log' for more details." >&2;} - { (exit 77); exit 77; }; }; } +{ as_fn_set_status 77 +as_fn_error "C compiler cannot create executables +See \`config.log' for more details." "$LINENO" 5; }; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } fi - +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 +$as_echo_n "checking for C compiler default output file name... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 +$as_echo "$ac_file" >&6; } ac_exeext=$ac_cv_exeext -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ $as_echo "$as_me:$LINENO: checking whether the C compiler works" >&5 -$as_echo_n "checking whether the C compiler works... " >&6; } -# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 -# If not cross compiling, check that we can run a simple program. -if test "$cross_compiling" != yes; then - if { ac_try='./$ac_file' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; }; } - fi - fi -fi -{ $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; } - rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ $as_echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 -$as_echo_n "checking whether we are cross compiling... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $cross_compiling" >&5 -$as_echo "$cross_compiling" >&6; } - -{ $as_echo "$as_me:$LINENO: checking for suffix of executables" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 $as_echo_n "checking for suffix of executables... " >&6; } -if { (ac_try="$ac_link" +if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : # If both `conftest.exe' and `conftest' are `present' (well, observable) # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with @@ -2683,32 +2899,83 @@ for ac_file in conftest.exe conftest con esac done else - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; }; } +as_fn_error "cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." "$LINENO" 5; } fi - -rm -f conftest$ac_cv_exeext -{ $as_echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 +rm -f conftest conftest$ac_cv_exeext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 $as_echo "$ac_cv_exeext" >&6; } rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT -{ $as_echo "$as_me:$LINENO: checking for suffix of object files" >&5 +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +FILE *f = fopen ("conftest.out", "w"); + return ferror (f) || fclose (f) != 0; + + ; + return 0; +} +_ACEOF +ac_clean_files="$ac_clean_files conftest.out" +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 +$as_echo_n "checking whether we are cross compiling... " >&6; } +if test "$cross_compiling" != yes; then + { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if { ac_try='./conftest$ac_cv_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error "cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." "$LINENO" 5; } + fi + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 +$as_echo "$cross_compiling" >&6; } + +rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 $as_echo_n "checking for suffix of object files... " >&6; } -if test "${ac_cv_objext+set}" = set; then +if test "${ac_cv_objext+set}" = set; then : $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -2720,17 +2987,17 @@ main () } _ACEOF rm -f conftest.o conftest.obj -if { (ac_try="$ac_compile" +if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : for ac_file in conftest.o conftest.obj conftest.*; do test -f "$ac_file" || continue; case $ac_file in @@ -2743,31 +3010,23 @@ else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: cannot compute suffix of object files: cannot compile -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; }; } +as_fn_error "cannot compute suffix of object files: cannot compile +See \`config.log' for more details." "$LINENO" 5; } fi - rm -f conftest.$ac_cv_objext conftest.$ac_ext fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 $as_echo "$ac_cv_objext" >&6; } OBJEXT=$ac_cv_objext ac_objext=$OBJEXT -{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; } -if test "${ac_cv_c_compiler_gnu+set}" = set; then +if test "${ac_cv_c_compiler_gnu+set}" = set; then : $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -2781,37 +3040,16 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then +if ac_fn_c_try_compile "$LINENO"; then : ac_compiler_gnu=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_compiler_gnu=no + ac_compiler_gnu=no fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 $as_echo "$ac_cv_c_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GCC=yes @@ -2820,20 +3058,16 @@ else fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS -{ $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 $as_echo_n "checking whether $CC accepts -g... " >&6; } -if test "${ac_cv_prog_cc_g+set}" = set; then +if test "${ac_cv_prog_cc_g+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -2844,75 +3078,27 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then +if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - CFLAGS="" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + CFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - : -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : - ac_c_werror_flag=$ac_save_c_werror_flag +else + ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -2923,42 +3109,17 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then +if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 $as_echo "$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS @@ -2975,18 +3136,14 @@ else CFLAGS= fi fi -{ $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } -if test "${ac_cv_prog_cc_c89+set}" = set; then +if test "${ac_cv_prog_cc_c89+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include @@ -3043,32 +3200,9 @@ for ac_arg in '' -qlanglvl=extc89 -qlang -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" - rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then + if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_c89=$ac_arg -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - fi - rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done @@ -3079,17 +3213,19 @@ fi # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) - { $as_echo "$as_me:$LINENO: result: none needed" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 $as_echo "none needed" >&6; } ;; xno) - { $as_echo "$as_me:$LINENO: result: unsupported" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" - { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 $as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac +if test "x$ac_cv_prog_cc_c89" != xno; then : +fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' @@ -3103,14 +3239,14 @@ ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 $as_echo_n "checking how to run the C preprocessor... " >&6; } # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then - if test "${ac_cv_prog_CPP+set}" = set; then + if test "${ac_cv_prog_CPP+set}" = set; then : $as_echo_n "(cached) " >&6 else # Double quotes because CPP needs to be expanded @@ -3125,11 +3261,7 @@ do # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include @@ -3138,78 +3270,34 @@ cat >>conftest.$ac_ext <<_ACEOF #endif Syntax error _ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - : -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +if ac_fn_c_try_cpp "$LINENO"; then : +else # Broken: fails on valid input. continue fi - rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then +if ac_fn_c_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - # Passes both tests. ac_preproc_ok=: break fi - rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then +if $ac_preproc_ok; then : break fi @@ -3221,7 +3309,7 @@ fi else ac_cv_prog_CPP=$CPP fi -{ $as_echo "$as_me:$LINENO: result: $CPP" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 $as_echo "$CPP" >&6; } ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes @@ -3232,11 +3320,7 @@ do # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include @@ -3245,87 +3329,40 @@ cat >>conftest.$ac_ext <<_ACEOF #endif Syntax error _ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - : -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +if ac_fn_c_try_cpp "$LINENO"; then : +else # Broken: fails on valid input. continue fi - rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then +if ac_fn_c_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - # Passes both tests. ac_preproc_ok=: break fi - rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - : +if $ac_preproc_ok; then : + else - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; }; } +as_fn_error "C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." "$LINENO" 5; } fi ac_ext=c @@ -3335,9 +3372,9 @@ ac_link='$CC -o conftest$ac_exeext $CFLA ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 $as_echo_n "checking for grep that handles long lines and -e... " >&6; } -if test "${ac_cv_path_GREP+set}" = set; then +if test "${ac_cv_path_GREP+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -z "$GREP"; then @@ -3348,7 +3385,7 @@ for as_dir in $PATH$PATH_SEPARATOR/usr/x do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_prog in grep ggrep; do + for ac_prog in grep ggrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue @@ -3368,7 +3405,7 @@ case `"$ac_path_GREP" --version 2>&1` in $as_echo 'GREP' >> "conftest.nl" "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - ac_count=`expr $ac_count + 1` + as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_GREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_GREP="$ac_path_GREP" @@ -3383,26 +3420,24 @@ esac $ac_path_GREP_found && break 3 done done -done + done IFS=$as_save_IFS if test -z "$ac_cv_path_GREP"; then - { { $as_echo "$as_me:$LINENO: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 -$as_echo "$as_me: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} - { (exit 1); exit 1; }; } + as_fn_error "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_GREP=$GREP fi fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 $as_echo "$ac_cv_path_GREP" >&6; } GREP="$ac_cv_path_GREP" -{ $as_echo "$as_me:$LINENO: checking for egrep" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 $as_echo_n "checking for egrep... " >&6; } -if test "${ac_cv_path_EGREP+set}" = set; then +if test "${ac_cv_path_EGREP+set}" = set; then : $as_echo_n "(cached) " >&6 else if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 @@ -3416,7 +3451,7 @@ for as_dir in $PATH$PATH_SEPARATOR/usr/x do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_prog in egrep; do + for ac_prog in egrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue @@ -3436,7 +3471,7 @@ case `"$ac_path_EGREP" --version 2>&1` i $as_echo 'EGREP' >> "conftest.nl" "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - ac_count=`expr $ac_count + 1` + as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_EGREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_EGREP="$ac_path_EGREP" @@ -3451,12 +3486,10 @@ esac $ac_path_EGREP_found && break 3 done done -done + done IFS=$as_save_IFS if test -z "$ac_cv_path_EGREP"; then - { { $as_echo "$as_me:$LINENO: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 -$as_echo "$as_me: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} - { (exit 1); exit 1; }; } + as_fn_error "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_EGREP=$EGREP @@ -3464,21 +3497,17 @@ fi fi fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 $as_echo "$ac_cv_path_EGREP" >&6; } EGREP="$ac_cv_path_EGREP" -{ $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 $as_echo_n "checking for ANSI C header files... " >&6; } -if test "${ac_cv_header_stdc+set}" = set; then +if test "${ac_cv_header_stdc+set}" = set; then : $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include @@ -3493,48 +3522,23 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then +if ac_fn_c_try_compile "$LINENO"; then : ac_cv_header_stdc=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_header_stdc=no + ac_cv_header_stdc=no fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then - : + $EGREP "memchr" >/dev/null 2>&1; then : + else ac_cv_header_stdc=no fi @@ -3544,18 +3548,14 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then - : + $EGREP "free" >/dev/null 2>&1; then : + else ac_cv_header_stdc=no fi @@ -3565,14 +3565,10 @@ fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then + if test "$cross_compiling" = yes; then : : else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include @@ -3599,118 +3595,34 @@ main () return 0; } _ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +if ac_fn_c_try_run "$LINENO"; then : -( exit $ac_status ) -ac_cv_header_stdc=no +else + ac_cv_header_stdc=no fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext fi - fi fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 $as_echo "$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then -cat >>confdefs.h <<\_ACEOF -#define STDC_HEADERS 1 -_ACEOF +$as_echo "#define STDC_HEADERS 1" >>confdefs.h fi # On IRIX 5.3, sys/types and inttypes.h are conflicting. - - - - - - - - - for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ inttypes.h stdint.h unistd.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default - -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - eval "$as_ac_Header=yes" -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_Header=no" -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default +" +eval as_val=\$$as_ac_Header + if test "x$as_val" = x""yes; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF @@ -3721,139 +3633,8 @@ done - if test "${ac_cv_header_minix_config_h+set}" = set; then - { $as_echo "$as_me:$LINENO: checking for minix/config.h" >&5 -$as_echo_n "checking for minix/config.h... " >&6; } -if test "${ac_cv_header_minix_config_h+set}" = set; then - $as_echo_n "(cached) " >&6 -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_minix_config_h" >&5 -$as_echo "$ac_cv_header_minix_config_h" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking minix/config.h usability" >&5 -$as_echo_n "checking minix/config.h usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_compiler=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } - -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking minix/config.h presence" >&5 -$as_echo_n "checking minix/config.h presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi - -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: minix/config.h: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: minix/config.h: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: minix/config.h: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: minix/config.h: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: minix/config.h: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: minix/config.h: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: minix/config.h: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: minix/config.h: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: minix/config.h: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: minix/config.h: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: minix/config.h: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: minix/config.h: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: minix/config.h: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: minix/config.h: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: minix/config.h: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: minix/config.h: in the future, the compiler will take precedence" >&2;} - ( cat <<\_ASBOX -## -------------------------------------------------------------------------- ## -## Report this to https://bugs.freedesktop.org/enter_bug.cgi?product=plymouth ## -## -------------------------------------------------------------------------- ## -_ASBOX - ) | sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for minix/config.h" >&5 -$as_echo_n "checking for minix/config.h... " >&6; } -if test "${ac_cv_header_minix_config_h+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_cv_header_minix_config_h=$ac_header_preproc -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_minix_config_h" >&5 -$as_echo "$ac_cv_header_minix_config_h" >&6; } - -fi -if test "x$ac_cv_header_minix_config_h" = x""yes; then + ac_fn_c_check_header_mongrel "$LINENO" "minix/config.h" "ac_cv_header_minix_config_h" "$ac_includes_default" +if test "x$ac_cv_header_minix_config_h" = x""yes; then : MINIX=yes else MINIX= @@ -3862,34 +3643,23 @@ fi if test "$MINIX" = yes; then -cat >>confdefs.h <<\_ACEOF -#define _POSIX_SOURCE 1 -_ACEOF +$as_echo "#define _POSIX_SOURCE 1" >>confdefs.h -cat >>confdefs.h <<\_ACEOF -#define _POSIX_1_SOURCE 2 -_ACEOF +$as_echo "#define _POSIX_1_SOURCE 2" >>confdefs.h -cat >>confdefs.h <<\_ACEOF -#define _MINIX 1 -_ACEOF +$as_echo "#define _MINIX 1" >>confdefs.h fi - - { $as_echo "$as_me:$LINENO: checking whether it is safe to define __EXTENSIONS__" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether it is safe to define __EXTENSIONS__" >&5 $as_echo_n "checking whether it is safe to define __EXTENSIONS__... " >&6; } -if test "${ac_cv_safe_to_define___extensions__+set}" = set; then +if test "${ac_cv_safe_to_define___extensions__+set}" = set; then : $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ # define __EXTENSIONS__ 1 @@ -3902,65 +3672,34 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then +if ac_fn_c_try_compile "$LINENO"; then : ac_cv_safe_to_define___extensions__=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_safe_to_define___extensions__=no + ac_cv_safe_to_define___extensions__=no fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_safe_to_define___extensions__" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_safe_to_define___extensions__" >&5 $as_echo "$ac_cv_safe_to_define___extensions__" >&6; } test $ac_cv_safe_to_define___extensions__ = yes && - cat >>confdefs.h <<\_ACEOF -#define __EXTENSIONS__ 1 -_ACEOF + $as_echo "#define __EXTENSIONS__ 1" >>confdefs.h - cat >>confdefs.h <<\_ACEOF -#define _ALL_SOURCE 1 -_ACEOF + $as_echo "#define _ALL_SOURCE 1" >>confdefs.h - cat >>confdefs.h <<\_ACEOF -#define _GNU_SOURCE 1 -_ACEOF + $as_echo "#define _GNU_SOURCE 1" >>confdefs.h - cat >>confdefs.h <<\_ACEOF -#define _POSIX_PTHREAD_SEMANTICS 1 -_ACEOF + $as_echo "#define _POSIX_PTHREAD_SEMANTICS 1" >>confdefs.h - cat >>confdefs.h <<\_ACEOF -#define _TANDEM_SOURCE 1 -_ACEOF + $as_echo "#define _TANDEM_SOURCE 1" >>confdefs.h for ac_prog in gawk mawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_AWK+set}" = set; then +if test "${ac_cv_prog_AWK+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$AWK"; then @@ -3971,24 +3710,24 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_AWK="$ac_prog" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi AWK=$ac_cv_prog_AWK if test -n "$AWK"; then - { $as_echo "$as_me:$LINENO: result: $AWK" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 $as_echo "$AWK" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -4004,9 +3743,9 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_CC+set}" = set; then +if test "${ac_cv_prog_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then @@ -4017,24 +3756,24 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}gcc" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - { $as_echo "$as_me:$LINENO: result: $CC" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -4044,9 +3783,9 @@ if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then @@ -4057,24 +3796,24 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="gcc" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -4083,7 +3822,7 @@ fi else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac @@ -4097,9 +3836,9 @@ if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_CC+set}" = set; then +if test "${ac_cv_prog_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then @@ -4110,24 +3849,24 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}cc" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - { $as_echo "$as_me:$LINENO: result: $CC" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -4137,9 +3876,9 @@ fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_CC+set}" = set; then +if test "${ac_cv_prog_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then @@ -4151,18 +3890,18 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS if test $ac_prog_rejected = yes; then @@ -4181,10 +3920,10 @@ fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - { $as_echo "$as_me:$LINENO: result: $CC" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -4196,9 +3935,9 @@ if test -z "$CC"; then do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_CC+set}" = set; then +if test "${ac_cv_prog_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then @@ -4209,24 +3948,24 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - { $as_echo "$as_me:$LINENO: result: $CC" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -4240,9 +3979,9 @@ if test -z "$CC"; then do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then @@ -4253,24 +3992,24 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="$ac_prog" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -4283,7 +4022,7 @@ done else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac @@ -4294,62 +4033,42 @@ fi fi -test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; }; } +as_fn_error "no acceptable C compiler found in \$PATH +See \`config.log' for more details." "$LINENO" 5; } # Provide some information about the compiler. -$as_echo "$as_me:$LINENO: checking for C compiler version" >&5 +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 set X $ac_compile ac_compiler=$2 -{ (ac_try="$ac_compiler --version >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compiler --version >&5") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (ac_try="$ac_compiler -v >&5" +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compiler -v >&5") 2>&5 +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (ac_try="$ac_compiler -V >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compiler -V >&5") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done -{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; } -if test "${ac_cv_c_compiler_gnu+set}" = set; then +if test "${ac_cv_c_compiler_gnu+set}" = set; then : $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -4363,37 +4082,16 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then +if ac_fn_c_try_compile "$LINENO"; then : ac_compiler_gnu=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_compiler_gnu=no + ac_compiler_gnu=no fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 $as_echo "$ac_cv_c_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GCC=yes @@ -4402,20 +4100,16 @@ else fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS -{ $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 $as_echo_n "checking whether $CC accepts -g... " >&6; } -if test "${ac_cv_prog_cc_g+set}" = set; then +if test "${ac_cv_prog_cc_g+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -4426,35 +4120,11 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then +if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - CFLAGS="" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + CFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -4465,36 +4135,12 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - : -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +if ac_fn_c_try_compile "$LINENO"; then : - ac_c_werror_flag=$ac_save_c_werror_flag +else + ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -4505,42 +4151,17 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then +if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 $as_echo "$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS @@ -4557,18 +4178,14 @@ else CFLAGS= fi fi -{ $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } -if test "${ac_cv_prog_cc_c89+set}" = set; then +if test "${ac_cv_prog_cc_c89+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include @@ -4625,32 +4242,9 @@ for ac_arg in '' -qlanglvl=extc89 -qlang -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" - rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then + if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_c89=$ac_arg -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - fi - rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done @@ -4661,17 +4255,19 @@ fi # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) - { $as_echo "$as_me:$LINENO: result: none needed" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 $as_echo "none needed" >&6; } ;; xno) - { $as_echo "$as_me:$LINENO: result: unsupported" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" - { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 $as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac +if test "x$ac_cv_prog_cc_c89" != xno; then : +fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' @@ -4680,22 +4276,18 @@ ac_link='$CC -o conftest$ac_exeext $CFLA ac_compiler_gnu=$ac_cv_c_compiler_gnu if test "x$CC" != xcc; then - { $as_echo "$as_me:$LINENO: checking whether $CC and cc understand -c and -o together" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC and cc understand -c and -o together" >&5 $as_echo_n "checking whether $CC and cc understand -c and -o together... " >&6; } else - { $as_echo "$as_me:$LINENO: checking whether cc understands -c and -o together" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether cc understands -c and -o together" >&5 $as_echo_n "checking whether cc understands -c and -o together... " >&6; } fi set dummy $CC; ac_cc=`$as_echo "$2" | sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` -if { as_var=ac_cv_prog_cc_${ac_cc}_c_o; eval "test \"\${$as_var+set}\" = set"; }; then +if { as_var=ac_cv_prog_cc_${ac_cc}_c_o; eval "test \"\${$as_var+set}\" = set"; }; then : $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -4711,63 +4303,63 @@ _ACEOF # existing .o file with -o, though they will create one. ac_try='$CC -c conftest.$ac_ext -o conftest2.$ac_objext >&5' rm -f conftest2.* -if { (case "(($ac_try" in +if { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - test -f conftest2.$ac_objext && { (case "(($ac_try" in + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && + test -f conftest2.$ac_objext && { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then eval ac_cv_prog_cc_${ac_cc}_c_o=yes if test "x$CC" != xcc; then # Test first that cc exists at all. if { ac_try='cc -c conftest.$ac_ext >&5' - { (case "(($ac_try" in + { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then ac_try='cc -c conftest.$ac_ext -o conftest2.$ac_objext >&5' rm -f conftest2.* - if { (case "(($ac_try" in + if { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - test -f conftest2.$ac_objext && { (case "(($ac_try" in + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && + test -f conftest2.$ac_objext && { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then # cc works too. : @@ -4784,15 +4376,13 @@ rm -f core conftest* fi if eval test \$ac_cv_prog_cc_${ac_cc}_c_o = yes; then - { $as_echo "$as_me:$LINENO: result: yes" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } -cat >>confdefs.h <<\_ACEOF -#define NO_MINUS_C_MINUS_O 1 -_ACEOF +$as_echo "#define NO_MINUS_C_MINUS_O 1" >>confdefs.h fi @@ -4814,16 +4404,12 @@ if test "$am_t" != yes; then fi -{ $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 $as_echo_n "checking for ANSI C header files... " >&6; } -if test "${ac_cv_header_stdc+set}" = set; then +if test "${ac_cv_header_stdc+set}" = set; then : $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include @@ -4838,48 +4424,23 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then +if ac_fn_c_try_compile "$LINENO"; then : ac_cv_header_stdc=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_header_stdc=no + ac_cv_header_stdc=no fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then - : + $EGREP "memchr" >/dev/null 2>&1; then : + else ac_cv_header_stdc=no fi @@ -4889,18 +4450,14 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then - : + $EGREP "free" >/dev/null 2>&1; then : + else ac_cv_header_stdc=no fi @@ -4910,14 +4467,10 @@ fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then + if test "$cross_compiling" = yes; then : : else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include @@ -4944,64 +4497,31 @@ main () return 0; } _ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +if ac_fn_c_try_run "$LINENO"; then : -( exit $ac_status ) -ac_cv_header_stdc=no +else + ac_cv_header_stdc=no fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext fi - fi fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 $as_echo "$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then -cat >>confdefs.h <<\_ACEOF -#define STDC_HEADERS 1 -_ACEOF +$as_echo "#define STDC_HEADERS 1" >>confdefs.h fi -{ $as_echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5 $as_echo_n "checking for an ANSI C-conforming const... " >&6; } -if test "${ac_cv_c_const+set}" = set; then +if test "${ac_cv_c_const+set}" = set; then : $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -5061,41 +4581,18 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then +if ac_fn_c_try_compile "$LINENO"; then : ac_cv_c_const=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_c_const=no + ac_cv_c_const=no fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5 $as_echo "$ac_cv_c_const" >&6; } if test $ac_cv_c_const = no; then -cat >>confdefs.h <<\_ACEOF -#define const /**/ -_ACEOF +$as_echo "#define const /**/" >>confdefs.h fi @@ -5116,10 +4613,10 @@ am__api_version='1.11' # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. # Reject install programs that cannot install multiple files. -{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 $as_echo_n "checking for a BSD-compatible install... " >&6; } if test -z "$INSTALL"; then -if test "${ac_cv_path_install+set}" = set; then +if test "${ac_cv_path_install+set}" = set; then : $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -5127,11 +4624,11 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - # Account for people who put trailing slashes in PATH elements. -case $as_dir/ in - ./ | .// | /cC/* | \ + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in #(( + ./ | .// | /[cC]/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ - ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ + ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. @@ -5168,7 +4665,7 @@ case $as_dir/ in ;; esac -done + done IFS=$as_save_IFS rm -rf conftest.one conftest.two conftest.dir @@ -5184,7 +4681,7 @@ fi INSTALL=$ac_install_sh fi fi -{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 $as_echo "$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. @@ -5195,7 +4692,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCR test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' -{ $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 $as_echo_n "checking whether build environment is sane... " >&6; } # Just in case sleep 1 @@ -5206,15 +4703,11 @@ am_lf=' ' case `pwd` in *[\\\"\#\$\&\'\`$am_lf]*) - { { $as_echo "$as_me:$LINENO: error: unsafe absolute working directory name" >&5 -$as_echo "$as_me: error: unsafe absolute working directory name" >&2;} - { (exit 1); exit 1; }; };; + as_fn_error "unsafe absolute working directory name" "$LINENO" 5;; esac case $srcdir in *[\\\"\#\$\&\'\`$am_lf\ \ ]*) - { { $as_echo "$as_me:$LINENO: error: unsafe srcdir value: \`$srcdir'" >&5 -$as_echo "$as_me: error: unsafe srcdir value: \`$srcdir'" >&2;} - { (exit 1); exit 1; }; };; + as_fn_error "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;; esac # Do `set' in a subshell so we don't clobber the current shell's @@ -5236,11 +4729,8 @@ if ( # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". - { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken -alias in your environment" >&5 -$as_echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken -alias in your environment" >&2;} - { (exit 1); exit 1; }; } + as_fn_error "ls -t appears to fail. Make sure there is not a broken +alias in your environment" "$LINENO" 5 fi test "$2" = conftest.file @@ -5249,13 +4739,10 @@ then # Ok. : else - { { $as_echo "$as_me:$LINENO: error: newly created file is older than distributed files! -Check your system clock" >&5 -$as_echo "$as_me: error: newly created file is older than distributed files! -Check your system clock" >&2;} - { (exit 1); exit 1; }; } + as_fn_error "newly created file is older than distributed files! +Check your system clock" "$LINENO" 5 fi -{ $as_echo "$as_me:$LINENO: result: yes" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } test "$program_prefix" != NONE && program_transform_name="s&^&$program_prefix&;$program_transform_name" @@ -5280,7 +4767,7 @@ if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " else am_missing_run= - { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5 $as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} fi @@ -5301,9 +4788,9 @@ if test "$cross_compiling" != no; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_STRIP+set}" = set; then +if test "${ac_cv_prog_STRIP+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$STRIP"; then @@ -5314,24 +4801,24 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then - { $as_echo "$as_me:$LINENO: result: $STRIP" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 $as_echo "$STRIP" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -5341,9 +4828,9 @@ if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then +if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_STRIP"; then @@ -5354,24 +4841,24 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_STRIP="strip" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then - { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 $as_echo "$ac_ct_STRIP" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -5380,7 +4867,7 @@ fi else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac @@ -5393,10 +4880,10 @@ fi fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" -{ $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 $as_echo_n "checking for a thread-safe mkdir -p... " >&6; } if test -z "$MKDIR_P"; then - if test "${ac_cv_path_mkdir+set}" = set; then + if test "${ac_cv_path_mkdir+set}" = set; then : $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -5404,7 +4891,7 @@ for as_dir in $PATH$PATH_SEPARATOR/opt/s do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_prog in mkdir gmkdir; do + for ac_prog in mkdir gmkdir; do for ac_exec_ext in '' $ac_executable_extensions; do { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( @@ -5416,11 +4903,12 @@ do esac done done -done + done IFS=$as_save_IFS fi + test -d ./--version && rmdir ./--version if test "${ac_cv_path_mkdir+set}" = set; then MKDIR_P="$ac_cv_path_mkdir -p" else @@ -5428,11 +4916,10 @@ fi # value for MKDIR_P within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. - test -d ./--version && rmdir ./--version MKDIR_P="$ac_install_sh -d" fi fi -{ $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 $as_echo "$MKDIR_P" >&6; } mkdir_p="$MKDIR_P" @@ -5441,11 +4928,11 @@ case $mkdir_p in */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; esac -{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } set x ${MAKE-make} ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then +if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then : $as_echo_n "(cached) " >&6 else cat >conftest.make <<\_ACEOF @@ -5463,11 +4950,11 @@ esac rm -f conftest.make fi if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then - { $as_echo "$as_me:$LINENO: result: yes" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } SET_MAKE= else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } SET_MAKE="MAKE=${MAKE-make}" fi @@ -5493,7 +4980,7 @@ am__doit: .PHONY: am__doit END # If we don't find an include directive, just comment out the code. -{ $as_echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 $as_echo_n "checking for style of include used by $am_make... " >&6; } am__include="#" am__quote= @@ -5521,12 +5008,12 @@ if test "$am__include" = "#"; then fi -{ $as_echo "$as_me:$LINENO: result: $_am_result" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 $as_echo "$_am_result" >&6; } rm -f confinc confmf # Check whether --enable-dependency-tracking was given. -if test "${enable_dependency_tracking+set}" = set; then +if test "${enable_dependency_tracking+set}" = set; then : enableval=$enable_dependency_tracking; fi @@ -5549,9 +5036,7 @@ if test "`cd $srcdir && pwd`" != "`pwd`" am__isrc=' -I$(srcdir)' # test to see if srcdir already configured if test -f $srcdir/config.status; then - { { $as_echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 -$as_echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} - { (exit 1); exit 1; }; } + as_fn_error "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 fi fi @@ -5608,9 +5093,9 @@ am__tar='${AMTAR} chof - "$$tardir"'; am depcc="$CC" am_compiler_list= -{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 $as_echo_n "checking dependency style of $depcc... " >&6; } -if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then +if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then @@ -5718,7 +5203,7 @@ else fi fi -{ $as_echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 $as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type @@ -5735,7 +5220,7 @@ fi # Check whether --enable-silent-rules was given. -if test "${enable_silent_rules+set}" = set; then +if test "${enable_silent_rules+set}" = set; then : enableval=$enable_silent_rules; fi @@ -5747,16 +5232,16 @@ esac AM_BACKSLASH='\' -{ $as_echo "$as_me:$LINENO: checking whether to disable maintainer-specific portions of Makefiles" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to disable maintainer-specific portions of Makefiles" >&5 $as_echo_n "checking whether to disable maintainer-specific portions of Makefiles... " >&6; } # Check whether --enable-maintainer-mode was given. -if test "${enable_maintainer_mode+set}" = set; then +if test "${enable_maintainer_mode+set}" = set; then : enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval else USE_MAINTAINER_MODE=yes fi - { $as_echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5 $as_echo "$USE_MAINTAINER_MODE" >&6; } if test $USE_MAINTAINER_MODE = yes; then MAINTAINER_MODE_TRUE= @@ -5776,9 +5261,9 @@ if test "x$ac_cv_env_PKG_CONFIG_set" != if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_PKG_CONFIG+set}" = set; then +if test "${ac_cv_path_PKG_CONFIG+set}" = set; then : $as_echo_n "(cached) " >&6 else case $PKG_CONFIG in @@ -5791,14 +5276,14 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS ;; @@ -5806,10 +5291,10 @@ esac fi PKG_CONFIG=$ac_cv_path_PKG_CONFIG if test -n "$PKG_CONFIG"; then - { $as_echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5 $as_echo "$PKG_CONFIG" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -5819,9 +5304,9 @@ if test -z "$ac_cv_path_PKG_CONFIG"; the ac_pt_PKG_CONFIG=$PKG_CONFIG # Extract the first word of "pkg-config", so it can be a program name with args. set dummy pkg-config; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then +if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then : $as_echo_n "(cached) " >&6 else case $ac_pt_PKG_CONFIG in @@ -5834,14 +5319,14 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS ;; @@ -5849,10 +5334,10 @@ esac fi ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG if test -n "$ac_pt_PKG_CONFIG"; then - { $as_echo "$as_me:$LINENO: result: $ac_pt_PKG_CONFIG" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5 $as_echo "$ac_pt_PKG_CONFIG" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -5861,7 +5346,7 @@ fi else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac @@ -5874,13 +5359,13 @@ fi fi if test -n "$PKG_CONFIG"; then _pkg_min_version=0.9.0 - { $as_echo "$as_me:$LINENO: checking pkg-config is at least version $_pkg_min_version" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5 $as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; } if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then - { $as_echo "$as_me:$LINENO: result: yes" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } PKG_CONFIG="" fi @@ -5888,14 +5373,14 @@ $as_echo "no" >&6; } fi case `pwd` in *\ * | *\ *) - { $as_echo "$as_me:$LINENO: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 $as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; esac -macro_version='2.2.6' -macro_revision='1.3012' +macro_version='2.2.6b' +macro_revision='1.3017' @@ -5913,35 +5398,27 @@ ltmain="$ac_aux_dir/ltmain.sh" # Make sure we can run config.sub. $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || - { { $as_echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 -$as_echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} - { (exit 1); exit 1; }; } + as_fn_error "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 -{ $as_echo "$as_me:$LINENO: checking build system type" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 $as_echo_n "checking build system type... " >&6; } -if test "${ac_cv_build+set}" = set; then +if test "${ac_cv_build+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_build_alias=$build_alias test "x$ac_build_alias" = x && ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` test "x$ac_build_alias" = x && - { { $as_echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 -$as_echo "$as_me: error: cannot guess build type; you must specify one" >&2;} - { (exit 1); exit 1; }; } + as_fn_error "cannot guess build type; you must specify one" "$LINENO" 5 ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || - { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 -$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} - { (exit 1); exit 1; }; } + as_fn_error "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_build" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 $as_echo "$ac_cv_build" >&6; } case $ac_cv_build in *-*-*) ;; -*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 -$as_echo "$as_me: error: invalid value of canonical build" >&2;} - { (exit 1); exit 1; }; };; +*) as_fn_error "invalid value of canonical build" "$LINENO" 5;; esac build=$ac_cv_build ac_save_IFS=$IFS; IFS='-' @@ -5957,28 +5434,24 @@ IFS=$ac_save_IFS case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac -{ $as_echo "$as_me:$LINENO: checking host system type" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 $as_echo_n "checking host system type... " >&6; } -if test "${ac_cv_host+set}" = set; then +if test "${ac_cv_host+set}" = set; then : $as_echo_n "(cached) " >&6 else if test "x$host_alias" = x; then ac_cv_host=$ac_cv_build else ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || - { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 -$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} - { (exit 1); exit 1; }; } + as_fn_error "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 fi fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_host" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 $as_echo "$ac_cv_host" >&6; } case $ac_cv_host in *-*-*) ;; -*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 -$as_echo "$as_me: error: invalid value of canonical host" >&2;} - { (exit 1); exit 1; }; };; +*) as_fn_error "invalid value of canonical host" "$LINENO" 5;; esac host=$ac_cv_host ac_save_IFS=$IFS; IFS='-' @@ -5994,9 +5467,9 @@ IFS=$ac_save_IFS case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac -{ $as_echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 $as_echo_n "checking for a sed that does not truncate output... " >&6; } -if test "${ac_cv_path_SED+set}" = set; then +if test "${ac_cv_path_SED+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ @@ -6004,7 +5477,7 @@ else ac_script="$ac_script$as_nl$ac_script" done echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed - $as_unset ac_script || ac_script= + { ac_script=; unset ac_script;} if test -z "$SED"; then ac_path_SED_found=false # Loop through the user's path and test for each of PROGNAME-LIST @@ -6013,7 +5486,7 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_prog in sed gsed; do + for ac_prog in sed gsed; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue @@ -6033,7 +5506,7 @@ case `"$ac_path_SED" --version 2>&1` in $as_echo '' >> "conftest.nl" "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - ac_count=`expr $ac_count + 1` + as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_SED_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_SED="$ac_path_SED" @@ -6048,19 +5521,17 @@ esac $ac_path_SED_found && break 3 done done -done + done IFS=$as_save_IFS if test -z "$ac_cv_path_SED"; then - { { $as_echo "$as_me:$LINENO: error: no acceptable sed could be found in \$PATH" >&5 -$as_echo "$as_me: error: no acceptable sed could be found in \$PATH" >&2;} - { (exit 1); exit 1; }; } + as_fn_error "no acceptable sed could be found in \$PATH" "$LINENO" 5 fi else ac_cv_path_SED=$SED fi fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_SED" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 $as_echo "$ac_cv_path_SED" >&6; } SED="$ac_cv_path_SED" rm -f conftest.sed @@ -6078,9 +5549,9 @@ Xsed="$SED -e 1s/^X//" -{ $as_echo "$as_me:$LINENO: checking for fgrep" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 $as_echo_n "checking for fgrep... " >&6; } -if test "${ac_cv_path_FGREP+set}" = set; then +if test "${ac_cv_path_FGREP+set}" = set; then : $as_echo_n "(cached) " >&6 else if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 @@ -6094,7 +5565,7 @@ for as_dir in $PATH$PATH_SEPARATOR/usr/x do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_prog in fgrep; do + for ac_prog in fgrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue @@ -6114,7 +5585,7 @@ case `"$ac_path_FGREP" --version 2>&1` i $as_echo 'FGREP' >> "conftest.nl" "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - ac_count=`expr $ac_count + 1` + as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_FGREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_FGREP="$ac_path_FGREP" @@ -6129,12 +5600,10 @@ esac $ac_path_FGREP_found && break 3 done done -done + done IFS=$as_save_IFS if test -z "$ac_cv_path_FGREP"; then - { { $as_echo "$as_me:$LINENO: error: no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 -$as_echo "$as_me: error: no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} - { (exit 1); exit 1; }; } + as_fn_error "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_FGREP=$FGREP @@ -6142,7 +5611,7 @@ fi fi fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_FGREP" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 $as_echo "$ac_cv_path_FGREP" >&6; } FGREP="$ac_cv_path_FGREP" @@ -6168,7 +5637,7 @@ test -z "$GREP" && GREP=grep # Check whether --with-gnu-ld was given. -if test "${with_gnu_ld+set}" = set; then +if test "${with_gnu_ld+set}" = set; then : withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes else with_gnu_ld=no @@ -6177,7 +5646,7 @@ fi ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. - { $as_echo "$as_me:$LINENO: checking for ld used by $CC" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 $as_echo_n "checking for ld used by $CC... " >&6; } case $host in *-*-mingw*) @@ -6207,13 +5676,13 @@ $as_echo_n "checking for ld used by $CC. ;; esac elif test "$with_gnu_ld" = yes; then - { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 $as_echo_n "checking for GNU ld... " >&6; } else - { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 $as_echo_n "checking for non-GNU ld... " >&6; } fi -if test "${lt_cv_path_LD+set}" = set; then +if test "${lt_cv_path_LD+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -z "$LD"; then @@ -6244,18 +5713,16 @@ fi LD="$lt_cv_path_LD" if test -n "$LD"; then - { $as_echo "$as_me:$LINENO: result: $LD" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5 $as_echo "$LD" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi -test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 -$as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} - { (exit 1); exit 1; }; } -{ $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 +test -z "$LD" && as_fn_error "no acceptable ld found in \$PATH" "$LINENO" 5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 $as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } -if test "${lt_cv_prog_gnu_ld+set}" = set; then +if test "${lt_cv_prog_gnu_ld+set}" = set; then : $as_echo_n "(cached) " >&6 else # I'd rather use --version here, but apparently some GNU lds only accept -v. @@ -6268,7 +5735,7 @@ case `$LD -v 2>&1 &5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5 $as_echo "$lt_cv_prog_gnu_ld" >&6; } with_gnu_ld=$lt_cv_prog_gnu_ld @@ -6280,9 +5747,9 @@ with_gnu_ld=$lt_cv_prog_gnu_ld -{ $as_echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 $as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } -if test "${lt_cv_path_NM+set}" = set; then +if test "${lt_cv_path_NM+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$NM"; then @@ -6329,7 +5796,7 @@ else : ${lt_cv_path_NM=no} fi fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 $as_echo "$lt_cv_path_NM" >&6; } if test "$lt_cv_path_NM" != "no"; then NM="$lt_cv_path_NM" @@ -6340,9 +5807,9 @@ else do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_DUMPBIN+set}" = set; then +if test "${ac_cv_prog_DUMPBIN+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$DUMPBIN"; then @@ -6353,24 +5820,24 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi DUMPBIN=$ac_cv_prog_DUMPBIN if test -n "$DUMPBIN"; then - { $as_echo "$as_me:$LINENO: result: $DUMPBIN" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 $as_echo "$DUMPBIN" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -6384,9 +5851,9 @@ if test -z "$DUMPBIN"; then do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then +if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_DUMPBIN"; then @@ -6397,24 +5864,24 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN if test -n "$ac_ct_DUMPBIN"; then - { $as_echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 $as_echo "$ac_ct_DUMPBIN" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -6427,7 +5894,7 @@ done else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac @@ -6447,44 +5914,44 @@ test -z "$NM" && NM=nm -{ $as_echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 $as_echo_n "checking the name lister ($NM) interface... " >&6; } -if test "${lt_cv_nm_interface+set}" = set; then +if test "${lt_cv_nm_interface+set}" = set; then : $as_echo_n "(cached) " >&6 else lt_cv_nm_interface="BSD nm" echo "int some_variable = 0;" > conftest.$ac_ext - (eval echo "\"\$as_me:6457: $ac_compile\"" >&5) + (eval echo "\"\$as_me:5924: $ac_compile\"" >&5) (eval "$ac_compile" 2>conftest.err) cat conftest.err >&5 - (eval echo "\"\$as_me:6460: $NM \\\"conftest.$ac_objext\\\"\"" >&5) + (eval echo "\"\$as_me:5927: $NM \\\"conftest.$ac_objext\\\"\"" >&5) (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) cat conftest.err >&5 - (eval echo "\"\$as_me:6463: output\"" >&5) + (eval echo "\"\$as_me:5930: output\"" >&5) cat conftest.out >&5 if $GREP 'External.*some_variable' conftest.out > /dev/null; then lt_cv_nm_interface="MS dumpbin" fi rm -f conftest* fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 $as_echo "$lt_cv_nm_interface" >&6; } -{ $as_echo "$as_me:$LINENO: checking whether ln -s works" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 $as_echo_n "checking whether ln -s works... " >&6; } LN_S=$as_ln_s if test "$LN_S" = "ln -s"; then - { $as_echo "$as_me:$LINENO: result: yes" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else - { $as_echo "$as_me:$LINENO: result: no, using $LN_S" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 $as_echo "no, using $LN_S" >&6; } fi # find the maximum length of command line arguments -{ $as_echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 $as_echo_n "checking the maximum length of command line arguments... " >&6; } -if test "${lt_cv_sys_max_cmd_len+set}" = set; then +if test "${lt_cv_sys_max_cmd_len+set}" = set; then : $as_echo_n "(cached) " >&6 else i=0 @@ -6602,10 +6069,10 @@ else fi if test -n $lt_cv_sys_max_cmd_len ; then - { $as_echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 $as_echo "$lt_cv_sys_max_cmd_len" >&6; } else - { $as_echo "$as_me:$LINENO: result: none" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 $as_echo "none" >&6; } fi max_cmd_len=$lt_cv_sys_max_cmd_len @@ -6619,7 +6086,7 @@ max_cmd_len=$lt_cv_sys_max_cmd_len : ${MV="mv -f"} : ${RM="rm -f"} -{ $as_echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5 $as_echo_n "checking whether the shell understands some XSI constructs... " >&6; } # Try some XSI features xsi_shell=no @@ -6629,17 +6096,17 @@ xsi_shell=no && eval 'test $(( 1 + 1 )) -eq 2 \ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ && xsi_shell=yes -{ $as_echo "$as_me:$LINENO: result: $xsi_shell" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5 $as_echo "$xsi_shell" >&6; } -{ $as_echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5 $as_echo_n "checking whether the shell understands \"+=\"... " >&6; } lt_shell_append=no ( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ >/dev/null 2>&1 \ && lt_shell_append=yes -{ $as_echo "$as_me:$LINENO: result: $lt_shell_append" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5 $as_echo "$lt_shell_append" >&6; } @@ -6674,14 +6141,14 @@ esac -{ $as_echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 $as_echo_n "checking for $LD option to reload object files... " >&6; } -if test "${lt_cv_ld_reload_flag+set}" = set; then +if test "${lt_cv_ld_reload_flag+set}" = set; then : $as_echo_n "(cached) " >&6 else lt_cv_ld_reload_flag='-r' fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 $as_echo "$lt_cv_ld_reload_flag" >&6; } reload_flag=$lt_cv_ld_reload_flag case $reload_flag in @@ -6710,9 +6177,9 @@ esac if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. set dummy ${ac_tool_prefix}objdump; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_OBJDUMP+set}" = set; then +if test "${ac_cv_prog_OBJDUMP+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$OBJDUMP"; then @@ -6723,24 +6190,24 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi OBJDUMP=$ac_cv_prog_OBJDUMP if test -n "$OBJDUMP"; then - { $as_echo "$as_me:$LINENO: result: $OBJDUMP" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 $as_echo "$OBJDUMP" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -6750,9 +6217,9 @@ if test -z "$ac_cv_prog_OBJDUMP"; then ac_ct_OBJDUMP=$OBJDUMP # Extract the first word of "objdump", so it can be a program name with args. set dummy objdump; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then +if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_OBJDUMP"; then @@ -6763,24 +6230,24 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_OBJDUMP="objdump" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP if test -n "$ac_ct_OBJDUMP"; then - { $as_echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 $as_echo "$ac_ct_OBJDUMP" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -6789,7 +6256,7 @@ fi else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac @@ -6809,9 +6276,9 @@ test -z "$OBJDUMP" && OBJDUMP=objdump -{ $as_echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 $as_echo_n "checking how to recognize dependent libraries... " >&6; } -if test "${lt_cv_deplibs_check_method+set}" = set; then +if test "${lt_cv_deplibs_check_method+set}" = set; then : $as_echo_n "(cached) " >&6 else lt_cv_file_magic_cmd='$MAGIC_CMD' @@ -6926,11 +6393,11 @@ irix5* | irix6* | nonstopux*) ;; # This must be Linux ELF. -linux* | k*bsd*-gnu) +linux* | k*bsd*-gnu | kopensolaris*-gnu) lt_cv_deplibs_check_method=pass_all ;; -netbsd*) +netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' else @@ -7005,7 +6472,7 @@ tpf*) esac fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 $as_echo "$lt_cv_deplibs_check_method" >&6; } file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method @@ -7025,9 +6492,9 @@ test -z "$deplibs_check_method" && depli if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. set dummy ${ac_tool_prefix}ar; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_AR+set}" = set; then +if test "${ac_cv_prog_AR+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$AR"; then @@ -7038,24 +6505,24 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_AR="${ac_tool_prefix}ar" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi AR=$ac_cv_prog_AR if test -n "$AR"; then - { $as_echo "$as_me:$LINENO: result: $AR" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 $as_echo "$AR" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -7065,9 +6532,9 @@ if test -z "$ac_cv_prog_AR"; then ac_ct_AR=$AR # Extract the first word of "ar", so it can be a program name with args. set dummy ar; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_AR+set}" = set; then +if test "${ac_cv_prog_ac_ct_AR+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_AR"; then @@ -7078,24 +6545,24 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_AR="ar" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi ac_ct_AR=$ac_cv_prog_ac_ct_AR if test -n "$ac_ct_AR"; then - { $as_echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 $as_echo "$ac_ct_AR" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -7104,7 +6571,7 @@ fi else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac @@ -7130,9 +6597,9 @@ test -z "$AR_FLAGS" && AR_FLAGS=cru if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_STRIP+set}" = set; then +if test "${ac_cv_prog_STRIP+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$STRIP"; then @@ -7143,24 +6610,24 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then - { $as_echo "$as_me:$LINENO: result: $STRIP" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 $as_echo "$STRIP" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -7170,9 +6637,9 @@ if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then +if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_STRIP"; then @@ -7183,24 +6650,24 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_STRIP="strip" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then - { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 $as_echo "$ac_ct_STRIP" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -7209,7 +6676,7 @@ fi else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac @@ -7229,9 +6696,9 @@ test -z "$STRIP" && STRIP=: if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_RANLIB+set}" = set; then +if test "${ac_cv_prog_RANLIB+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$RANLIB"; then @@ -7242,24 +6709,24 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi RANLIB=$ac_cv_prog_RANLIB if test -n "$RANLIB"; then - { $as_echo "$as_me:$LINENO: result: $RANLIB" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 $as_echo "$RANLIB" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -7269,9 +6736,9 @@ if test -z "$ac_cv_prog_RANLIB"; then ac_ct_RANLIB=$RANLIB # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then +if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_RANLIB"; then @@ -7282,24 +6749,24 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_RANLIB="ranlib" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB if test -n "$ac_ct_RANLIB"; then - { $as_echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 $as_echo "$ac_ct_RANLIB" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -7308,7 +6775,7 @@ fi else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac @@ -7386,9 +6853,9 @@ compiler=$CC # Check for command to grab the raw symbol name followed by C symbol from nm. -{ $as_echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 $as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } -if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then +if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then : $as_echo_n "(cached) " >&6 else @@ -7504,18 +6971,18 @@ void nm_test_func(void){} int main(){nm_test_var='a';nm_test_func();return(0);} _LT_EOF - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then # Now try to grab the symbols. nlist=conftest.nm - if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5 + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\""; } >&5 (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s "$nlist"; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s "$nlist"; then # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" @@ -7568,11 +7035,11 @@ _LT_EOF lt_save_CFLAGS="$CFLAGS" LIBS="conftstm.$ac_objext" CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext}; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s conftest${ac_exeext}; then pipe_works=yes fi LIBS="$lt_save_LIBS" @@ -7606,10 +7073,10 @@ if test -z "$lt_cv_sys_global_symbol_pip lt_cv_sys_global_symbol_to_cdecl= fi if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then - { $as_echo "$as_me:$LINENO: result: failed" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5 $as_echo "failed" >&6; } else - { $as_echo "$as_me:$LINENO: result: ok" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 $as_echo "ok" >&6; } fi @@ -7635,7 +7102,7 @@ fi # Check whether --enable-libtool-lock was given. -if test "${enable_libtool_lock+set}" = set; then +if test "${enable_libtool_lock+set}" = set; then : enableval=$enable_libtool_lock; fi @@ -7647,11 +7114,11 @@ case $host in ia64-*-hpux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then case `/usr/bin/file conftest.$ac_objext` in *ELF-32*) HPUX_IA64_MODE="32" @@ -7665,12 +7132,12 @@ ia64-*-hpux*) ;; *-*-irix6*) # Find out which ABI we are using. - echo '#line 7668 "configure"' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + echo '#line 7135 "configure"' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then if test "$lt_cv_prog_gnu_ld" = yes; then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) @@ -7704,11 +7171,11 @@ x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc s390*-*linux*|s390*-*tpf*|sparc*-*linux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then case `/usr/bin/file conftest.o` in *32-bit*) case $host in @@ -7757,9 +7224,9 @@ s390*-*linux*|s390*-*tpf*|sparc*-*linux* # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" - { $as_echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 $as_echo_n "checking whether the C compiler needs -belf... " >&6; } -if test "${lt_cv_cc_needs_belf+set}" = set; then +if test "${lt_cv_cc_needs_belf+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_ext=c @@ -7768,11 +7235,7 @@ ac_compile='$CC -c $CFLAGS $CPPFLAGS con ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -7783,38 +7246,13 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then +if ac_fn_c_try_link "$LINENO"; then : lt_cv_cc_needs_belf=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - lt_cv_cc_needs_belf=no + lt_cv_cc_needs_belf=no fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' @@ -7822,7 +7260,7 @@ ac_link='$CC -o conftest$ac_exeext $CFLA ac_compiler_gnu=$ac_cv_c_compiler_gnu fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 $as_echo "$lt_cv_cc_needs_belf" >&6; } if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf @@ -7832,11 +7270,11 @@ $as_echo "$lt_cv_cc_needs_belf" >&6; } sparc*-*solaris*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then case `/usr/bin/file conftest.o` in *64-bit*) case $lt_cv_prog_gnu_ld in @@ -7862,9 +7300,9 @@ need_locks="$enable_libtool_lock" if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_DSYMUTIL+set}" = set; then +if test "${ac_cv_prog_DSYMUTIL+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$DSYMUTIL"; then @@ -7875,24 +7313,24 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi DSYMUTIL=$ac_cv_prog_DSYMUTIL if test -n "$DSYMUTIL"; then - { $as_echo "$as_me:$LINENO: result: $DSYMUTIL" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 $as_echo "$DSYMUTIL" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -7902,9 +7340,9 @@ if test -z "$ac_cv_prog_DSYMUTIL"; then ac_ct_DSYMUTIL=$DSYMUTIL # Extract the first word of "dsymutil", so it can be a program name with args. set dummy dsymutil; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then +if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_DSYMUTIL"; then @@ -7915,24 +7353,24 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL if test -n "$ac_ct_DSYMUTIL"; then - { $as_echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 $as_echo "$ac_ct_DSYMUTIL" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -7941,7 +7379,7 @@ fi else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac @@ -7954,9 +7392,9 @@ fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. set dummy ${ac_tool_prefix}nmedit; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_NMEDIT+set}" = set; then +if test "${ac_cv_prog_NMEDIT+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$NMEDIT"; then @@ -7967,24 +7405,24 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi NMEDIT=$ac_cv_prog_NMEDIT if test -n "$NMEDIT"; then - { $as_echo "$as_me:$LINENO: result: $NMEDIT" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 $as_echo "$NMEDIT" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -7994,9 +7432,9 @@ if test -z "$ac_cv_prog_NMEDIT"; then ac_ct_NMEDIT=$NMEDIT # Extract the first word of "nmedit", so it can be a program name with args. set dummy nmedit; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then +if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_NMEDIT"; then @@ -8007,24 +7445,24 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_NMEDIT="nmedit" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT if test -n "$ac_ct_NMEDIT"; then - { $as_echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 $as_echo "$ac_ct_NMEDIT" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -8033,7 +7471,7 @@ fi else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac @@ -8046,9 +7484,9 @@ fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. set dummy ${ac_tool_prefix}lipo; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_LIPO+set}" = set; then +if test "${ac_cv_prog_LIPO+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$LIPO"; then @@ -8059,24 +7497,24 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_LIPO="${ac_tool_prefix}lipo" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi LIPO=$ac_cv_prog_LIPO if test -n "$LIPO"; then - { $as_echo "$as_me:$LINENO: result: $LIPO" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 $as_echo "$LIPO" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -8086,9 +7524,9 @@ if test -z "$ac_cv_prog_LIPO"; then ac_ct_LIPO=$LIPO # Extract the first word of "lipo", so it can be a program name with args. set dummy lipo; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then +if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_LIPO"; then @@ -8099,24 +7537,24 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_LIPO="lipo" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO if test -n "$ac_ct_LIPO"; then - { $as_echo "$as_me:$LINENO: result: $ac_ct_LIPO" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 $as_echo "$ac_ct_LIPO" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -8125,7 +7563,7 @@ fi else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac @@ -8138,9 +7576,9 @@ fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. set dummy ${ac_tool_prefix}otool; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_OTOOL+set}" = set; then +if test "${ac_cv_prog_OTOOL+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$OTOOL"; then @@ -8151,24 +7589,24 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_OTOOL="${ac_tool_prefix}otool" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi OTOOL=$ac_cv_prog_OTOOL if test -n "$OTOOL"; then - { $as_echo "$as_me:$LINENO: result: $OTOOL" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 $as_echo "$OTOOL" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -8178,9 +7616,9 @@ if test -z "$ac_cv_prog_OTOOL"; then ac_ct_OTOOL=$OTOOL # Extract the first word of "otool", so it can be a program name with args. set dummy otool; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then +if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_OTOOL"; then @@ -8191,24 +7629,24 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_OTOOL="otool" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL if test -n "$ac_ct_OTOOL"; then - { $as_echo "$as_me:$LINENO: result: $ac_ct_OTOOL" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 $as_echo "$ac_ct_OTOOL" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -8217,7 +7655,7 @@ fi else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac @@ -8230,9 +7668,9 @@ fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. set dummy ${ac_tool_prefix}otool64; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_OTOOL64+set}" = set; then +if test "${ac_cv_prog_OTOOL64+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$OTOOL64"; then @@ -8243,24 +7681,24 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi OTOOL64=$ac_cv_prog_OTOOL64 if test -n "$OTOOL64"; then - { $as_echo "$as_me:$LINENO: result: $OTOOL64" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 $as_echo "$OTOOL64" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -8270,9 +7708,9 @@ if test -z "$ac_cv_prog_OTOOL64"; then ac_ct_OTOOL64=$OTOOL64 # Extract the first word of "otool64", so it can be a program name with args. set dummy otool64; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then +if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_OTOOL64"; then @@ -8283,24 +7721,24 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_OTOOL64="otool64" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 if test -n "$ac_ct_OTOOL64"; then - { $as_echo "$as_me:$LINENO: result: $ac_ct_OTOOL64" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 $as_echo "$ac_ct_OTOOL64" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -8309,7 +7747,7 @@ fi else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac @@ -8345,9 +7783,9 @@ fi - { $as_echo "$as_me:$LINENO: checking for -single_module linker flag" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 $as_echo_n "checking for -single_module linker flag... " >&6; } -if test "${lt_cv_apple_cc_single_mod+set}" = set; then +if test "${lt_cv_apple_cc_single_mod+set}" = set; then : $as_echo_n "(cached) " >&6 else lt_cv_apple_cc_single_mod=no @@ -8372,22 +7810,18 @@ else rm -f conftest.* fi fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 $as_echo "$lt_cv_apple_cc_single_mod" >&6; } - { $as_echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 $as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } -if test "${lt_cv_ld_exported_symbols_list+set}" = set; then +if test "${lt_cv_ld_exported_symbols_list+set}" = set; then : $as_echo_n "(cached) " >&6 else lt_cv_ld_exported_symbols_list=no save_LDFLAGS=$LDFLAGS echo "_main" > conftest.sym LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -8398,42 +7832,17 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then +if ac_fn_c_try_link "$LINENO"; then : lt_cv_ld_exported_symbols_list=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - lt_cv_ld_exported_symbols_list=no + lt_cv_ld_exported_symbols_list=no fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LDFLAGS="$save_LDFLAGS" fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 $as_echo "$lt_cv_ld_exported_symbols_list" >&6; } case $host_os in rhapsody* | darwin1.[012]) @@ -8470,62 +7879,13 @@ $as_echo "$lt_cv_ld_exported_symbols_lis ;; esac - for ac_header in dlfcn.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default - -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - eval "$as_ac_Header=yes" -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_Header=no" -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then +do : + ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default +" +if test "x$ac_cv_header_dlfcn_h" = x""yes; then : cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +#define HAVE_DLFCN_H 1 _ACEOF fi @@ -8545,7 +7905,7 @@ done # Check whether --enable-shared was given. -if test "${enable_shared+set}" = set; then +if test "${enable_shared+set}" = set; then : enableval=$enable_shared; p=${PACKAGE-default} case $enableval in yes) enable_shared=yes ;; @@ -8576,7 +7936,7 @@ fi # Check whether --enable-static was given. -if test "${enable_static+set}" = set; then +if test "${enable_static+set}" = set; then : enableval=$enable_static; p=${PACKAGE-default} case $enableval in yes) enable_static=yes ;; @@ -8608,7 +7968,7 @@ fi # Check whether --with-pic was given. -if test "${with_pic+set}" = set; then +if test "${with_pic+set}" = set; then : withval=$with_pic; pic_mode="$withval" else pic_mode=default @@ -8624,7 +7984,7 @@ test -z "$pic_mode" && pic_mode=default # Check whether --enable-fast-install was given. -if test "${enable_fast_install+set}" = set; then +if test "${enable_fast_install+set}" = set; then : enableval=$enable_fast_install; p=${PACKAGE-default} case $enableval in yes) enable_fast_install=yes ;; @@ -8705,9 +8065,9 @@ if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi -{ $as_echo "$as_me:$LINENO: checking for objdir" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 $as_echo_n "checking for objdir... " >&6; } -if test "${lt_cv_objdir+set}" = set; then +if test "${lt_cv_objdir+set}" = set; then : $as_echo_n "(cached) " >&6 else rm -f .libs 2>/dev/null @@ -8720,7 +8080,7 @@ else fi rmdir .libs 2>/dev/null fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 $as_echo "$lt_cv_objdir" >&6; } objdir=$lt_cv_objdir @@ -8813,9 +8173,9 @@ test -z "$MAGIC_CMD" && MAGIC_CMD=file case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then - { $as_echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 $as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } -if test "${lt_cv_path_MAGIC_CMD+set}" = set; then +if test "${lt_cv_path_MAGIC_CMD+set}" = set; then : $as_echo_n "(cached) " >&6 else case $MAGIC_CMD in @@ -8866,10 +8226,10 @@ fi MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then - { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 $as_echo "$MAGIC_CMD" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -8879,9 +8239,9 @@ fi if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then - { $as_echo "$as_me:$LINENO: checking for file" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 $as_echo_n "checking for file... " >&6; } -if test "${lt_cv_path_MAGIC_CMD+set}" = set; then +if test "${lt_cv_path_MAGIC_CMD+set}" = set; then : $as_echo_n "(cached) " >&6 else case $MAGIC_CMD in @@ -8932,10 +8292,10 @@ fi MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then - { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 $as_echo "$MAGIC_CMD" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -9012,9 +8372,9 @@ lt_prog_compiler_no_builtin_flag= if test "$GCC" = yes; then lt_prog_compiler_no_builtin_flag=' -fno-builtin' - { $as_echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 $as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } -if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then +if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_rtti_exceptions=no @@ -9030,11 +8390,11 @@ else -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:9033: $lt_compile\"" >&5) + (eval echo "\"\$as_me:8393: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:9037: \$? = $ac_status" >&5 + echo "$as_me:8397: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. @@ -9047,7 +8407,7 @@ else $RM conftest* fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 $as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then @@ -9067,7 +8427,7 @@ fi lt_prog_compiler_pic= lt_prog_compiler_static= -{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 $as_echo_n "checking for $compiler option to produce PIC... " >&6; } if test "$GCC" = yes; then @@ -9199,7 +8559,7 @@ $as_echo_n "checking for $compiler optio lt_prog_compiler_static='-non_shared' ;; - linux* | k*bsd*-gnu) + linux* | k*bsd*-gnu | kopensolaris*-gnu) case $cc_basename in # old Intel for x86_64 which still supported -KPIC. ecc*) @@ -9339,7 +8699,7 @@ case $host_os in lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" ;; esac -{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5 $as_echo "$lt_prog_compiler_pic" >&6; } @@ -9351,9 +8711,9 @@ $as_echo "$lt_prog_compiler_pic" >&6; } # Check to make sure the PIC flag actually works. # if test -n "$lt_prog_compiler_pic"; then - { $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 $as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } -if test "${lt_cv_prog_compiler_pic_works+set}" = set; then +if test "${lt_cv_prog_compiler_pic_works+set}" = set; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_pic_works=no @@ -9369,11 +8729,11 @@ else -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:9372: $lt_compile\"" >&5) + (eval echo "\"\$as_me:8732: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:9376: \$? = $ac_status" >&5 + echo "$as_me:8736: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. @@ -9386,7 +8746,7 @@ else $RM conftest* fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 $as_echo "$lt_cv_prog_compiler_pic_works" >&6; } if test x"$lt_cv_prog_compiler_pic_works" = xyes; then @@ -9410,9 +8770,9 @@ fi # Check to make sure the static flag actually works. # wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" -{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 $as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } -if test "${lt_cv_prog_compiler_static_works+set}" = set; then +if test "${lt_cv_prog_compiler_static_works+set}" = set; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_static_works=no @@ -9438,7 +8798,7 @@ else LDFLAGS="$save_LDFLAGS" fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 $as_echo "$lt_cv_prog_compiler_static_works" >&6; } if test x"$lt_cv_prog_compiler_static_works" = xyes; then @@ -9453,9 +8813,9 @@ fi - { $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if test "${lt_cv_prog_compiler_c_o+set}" = set; then +if test "${lt_cv_prog_compiler_c_o+set}" = set; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o=no @@ -9474,11 +8834,11 @@ else -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:9477: $lt_compile\"" >&5) + (eval echo "\"\$as_me:8837: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:9481: \$? = $ac_status" >&5 + echo "$as_me:8841: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -9500,7 +8860,7 @@ else $RM conftest* fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 $as_echo "$lt_cv_prog_compiler_c_o" >&6; } @@ -9508,9 +8868,9 @@ $as_echo "$lt_cv_prog_compiler_c_o" >&6; - { $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if test "${lt_cv_prog_compiler_c_o+set}" = set; then +if test "${lt_cv_prog_compiler_c_o+set}" = set; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o=no @@ -9529,11 +8889,11 @@ else -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:9532: $lt_compile\"" >&5) + (eval echo "\"\$as_me:8892: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:9536: \$? = $ac_status" >&5 + echo "$as_me:8896: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -9555,7 +8915,7 @@ else $RM conftest* fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 $as_echo "$lt_cv_prog_compiler_c_o" >&6; } @@ -9564,7 +8924,7 @@ $as_echo "$lt_cv_prog_compiler_c_o" >&6; hard_links="nottested" if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user - { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 $as_echo_n "checking if we can lock with hard links... " >&6; } hard_links=yes $RM conftest* @@ -9572,10 +8932,10 @@ $as_echo_n "checking if we can lock with touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no - { $as_echo "$as_me:$LINENO: result: $hard_links" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 $as_echo "$hard_links" >&6; } if test "$hard_links" = no; then - { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 $as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} need_locks=warn fi @@ -9588,7 +8948,7 @@ fi - { $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 $as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } runpath_var= @@ -9648,6 +9008,9 @@ $as_echo_n "checking whether the $compil openbsd*) with_gnu_ld=no ;; + linux* | k*bsd*-gnu) + link_all_deplibs=no + ;; esac ld_shlibs=yes @@ -9669,6 +9032,7 @@ $as_echo_n "checking whether the $compil fi supports_anon_versioning=no case `$LD -v 2>&1` in + *GNU\ gold*) supports_anon_versioning=yes ;; *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... @@ -9760,7 +9124,7 @@ _LT_EOF archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; - gnu* | linux* | tpf* | k*bsd*-gnu) + gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) tmp_diet=no if test "$host_os" = linux-dietlibc; then case $cc_basename in @@ -9830,7 +9194,7 @@ _LT_EOF fi ;; - netbsd*) + netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= @@ -10005,6 +9369,7 @@ _LT_EOF if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi + link_all_deplibs=no else # not using gcc if test "$host_cpu" = ia64; then @@ -10030,11 +9395,7 @@ _LT_EOF allow_undefined_flag='-berok' # Determine the default libpath from the value encoded in an # empty executable. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -10045,27 +9406,7 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then +if ac_fn_c_try_link "$LINENO"; then : lt_aix_libpath_sed=' /Import File Strings/,/^$/ { @@ -10079,16 +9420,9 @@ aix_libpath=`dump -H conftest$ac_exeext if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" @@ -10101,11 +9435,7 @@ if test -z "$aix_libpath"; then aix_libp else # Determine the default libpath from the value encoded in an # empty executable. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -10116,27 +9446,7 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then +if ac_fn_c_try_link "$LINENO"; then : lt_aix_libpath_sed=' /Import File Strings/,/^$/ { @@ -10150,16 +9460,9 @@ aix_libpath=`dump -H conftest$ac_exeext if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" @@ -10371,42 +9674,16 @@ if test -z "$aix_libpath"; then aix_libp # implicitly export all symbols. save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" - cat >conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ int foo(void) {} _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then +if ac_fn_c_try_link "$LINENO"; then : archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LDFLAGS="$save_LDFLAGS" else archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' @@ -10419,7 +9696,7 @@ rm -f core conftest.err conftest.$ac_obj link_all_deplibs=yes ;; - netbsd*) + netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else @@ -10662,7 +9939,7 @@ rm -f core conftest.err conftest.$ac_obj fi fi -{ $as_echo "$as_me:$LINENO: result: $ld_shlibs" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 $as_echo "$ld_shlibs" >&6; } test "$ld_shlibs" = no && can_build_shared=no @@ -10699,16 +9976,16 @@ x|xyes) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. - { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } $RM conftest* echo "$lt_simple_compile_test_code" > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } 2>conftest.err; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } 2>conftest.err; then soname=conftest lib=conftest libobjs=conftest.$ac_objext @@ -10722,11 +9999,11 @@ $as_echo_n "checking whether -lc should libname=conftest lt_save_allow_undefined_flag=$allow_undefined_flag allow_undefined_flag= - if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5 + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } then archive_cmds_need_lc=no else @@ -10737,7 +10014,7 @@ $as_echo_n "checking whether -lc should cat conftest.err 1>&5 fi $RM conftest* - { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $archive_cmds_need_lc" >&5 $as_echo "$archive_cmds_need_lc" >&6; } ;; esac @@ -10901,7 +10178,7 @@ esac - { $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 $as_echo_n "checking dynamic linker characteristics... " >&6; } if test "$GCC" = yes; then @@ -11309,7 +10586,7 @@ linux*oldld* | linux*aout* | linux*coff* ;; # This must be Linux ELF. -linux* | k*bsd*-gnu) +linux* | k*bsd*-gnu | kopensolaris*-gnu) version_type=linux need_lib_prefix=no need_version=no @@ -11323,11 +10600,7 @@ linux* | k*bsd*-gnu) save_libdir=$libdir eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -11338,41 +10611,13 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then +if ac_fn_c_try_link "$LINENO"; then : + if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : shlibpath_overrides_runpath=yes fi - -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LDFLAGS=$save_LDFLAGS libdir=$save_libdir @@ -11381,13 +10626,10 @@ rm -f core conftest.err conftest.$ac_obj # before this can be enabled. hardcode_into_libs=yes - # Add ABI-specific directories to the system library path. - sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib" - # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra" + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on @@ -11399,6 +10641,18 @@ rm -f core conftest.err conftest.$ac_obj dynamic_linker='GNU/Linux ld.so' ;; +netbsdelf*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='NetBSD ld.elf_so' + ;; + netbsd*) version_type=sunos need_lib_prefix=no @@ -11587,7 +10841,7 @@ uts4*) dynamic_linker=no ;; esac -{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 $as_echo "$dynamic_linker" >&6; } test "$dynamic_linker" = no && can_build_shared=no @@ -11689,7 +10943,7 @@ fi - { $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 $as_echo_n "checking how to hardcode library paths into programs... " >&6; } hardcode_action= if test -n "$hardcode_libdir_flag_spec" || @@ -11714,7 +10968,7 @@ else # directories. hardcode_action=unsupported fi -{ $as_echo "$as_me:$LINENO: result: $hardcode_action" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 $as_echo "$hardcode_action" >&6; } if test "$hardcode_action" = relink || @@ -11752,191 +11006,21 @@ else lt_cv_dlopen_libs= ;; - cygwin*) - lt_cv_dlopen="dlopen" - lt_cv_dlopen_libs= - ;; - - darwin*) - # if libdl is installed we need to link against it - { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 -$as_echo_n "checking for dlopen in -ldl... " >&6; } -if test "${ac_cv_lib_dl_dlopen+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_lib_dl_dlopen=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_dl_dlopen=no -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 -$as_echo "$ac_cv_lib_dl_dlopen" >&6; } -if test "x$ac_cv_lib_dl_dlopen" = x""yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" -else - - lt_cv_dlopen="dyld" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - -fi - - ;; - - *) - { $as_echo "$as_me:$LINENO: checking for shl_load" >&5 -$as_echo_n "checking for shl_load... " >&6; } -if test "${ac_cv_func_shl_load+set}" = set; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define shl_load to an innocuous variant, in case declares shl_load. - For example, HP-UX 11i declares gettimeofday. */ -#define shl_load innocuous_shl_load - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char shl_load (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef shl_load - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char shl_load (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_shl_load || defined __stub___shl_load -choke me -#endif - -int -main () -{ -return shl_load (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_func_shl_load=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_func_shl_load=no -fi + cygwin*) + lt_cv_dlopen="dlopen" + lt_cv_dlopen_libs= + ;; -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 -$as_echo "$ac_cv_func_shl_load" >&6; } -if test "x$ac_cv_func_shl_load" = x""yes; then - lt_cv_dlopen="shl_load" -else - { $as_echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 -$as_echo_n "checking for shl_load in -ldld... " >&6; } -if test "${ac_cv_lib_dld_shl_load+set}" = set; then + darwin*) + # if libdl is installed we need to link against it + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 +$as_echo_n "checking for dlopen in -ldl... " >&6; } +if test "${ac_cv_lib_dl_dlopen+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +LIBS="-ldl $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. @@ -11945,81 +11029,52 @@ cat >>conftest.$ac_ext <<_ACEOF #ifdef __cplusplus extern "C" #endif -char shl_load (); +char dlopen (); int main () { -return shl_load (); +return dlopen (); ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_lib_dld_shl_load=yes +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dl_dlopen=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_dld_shl_load=no + ac_cv_lib_dl_dlopen=no fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 -$as_echo "$ac_cv_lib_dld_shl_load" >&6; } -if test "x$ac_cv_lib_dld_shl_load" = x""yes; then - lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" -else - { $as_echo "$as_me:$LINENO: checking for dlopen" >&5 -$as_echo_n "checking for dlopen... " >&6; } -if test "${ac_cv_func_dlopen+set}" = set; then - $as_echo_n "(cached) " >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 +$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = x""yes; then : + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define dlopen to an innocuous variant, in case declares dlopen. - For example, HP-UX 11i declares gettimeofday. */ -#define dlopen innocuous_dlopen -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char dlopen (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ + lt_cv_dlopen="dyld" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes -#ifdef __STDC__ -# include -#else -# include -#endif +fi + + ;; -#undef dlopen + *) + ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" +if test "x$ac_cv_func_shl_load" = x""yes; then : + lt_cv_dlopen="shl_load" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 +$as_echo_n "checking for shl_load in -ldld... " >&6; } +if test "${ac_cv_lib_dld_shl_load+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC @@ -12027,72 +11082,41 @@ cat >>conftest.$ac_ext <<_ACEOF #ifdef __cplusplus extern "C" #endif -char dlopen (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_dlopen || defined __stub___dlopen -choke me -#endif - +char shl_load (); int main () { -return dlopen (); +return shl_load (); ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_func_dlopen=yes +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dld_shl_load=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_func_dlopen=no + ac_cv_lib_dld_shl_load=no fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 -$as_echo "$ac_cv_func_dlopen" >&6; } -if test "x$ac_cv_func_dlopen" = x""yes; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 +$as_echo "$ac_cv_lib_dld_shl_load" >&6; } +if test "x$ac_cv_lib_dld_shl_load" = x""yes; then : + lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" +else + ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" +if test "x$ac_cv_func_dlopen" = x""yes; then : lt_cv_dlopen="dlopen" else - { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 $as_echo_n "checking for dlopen in -ldl... " >&6; } -if test "${ac_cv_lib_dl_dlopen+set}" = set; then +if test "${ac_cv_lib_dl_dlopen+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldl $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. @@ -12110,57 +11134,28 @@ return dlopen (); return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then +if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dl_dlopen=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_dl_dlopen=no + ac_cv_lib_dl_dlopen=no fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 $as_echo "$ac_cv_lib_dl_dlopen" >&6; } -if test "x$ac_cv_lib_dl_dlopen" = x""yes; then +if test "x$ac_cv_lib_dl_dlopen" = x""yes; then : lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" else - { $as_echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 $as_echo_n "checking for dlopen in -lsvld... " >&6; } -if test "${ac_cv_lib_svld_dlopen+set}" = set; then +if test "${ac_cv_lib_svld_dlopen+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lsvld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. @@ -12178,57 +11173,28 @@ return dlopen (); return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then +if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_svld_dlopen=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_svld_dlopen=no + ac_cv_lib_svld_dlopen=no fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 $as_echo "$ac_cv_lib_svld_dlopen" >&6; } -if test "x$ac_cv_lib_svld_dlopen" = x""yes; then +if test "x$ac_cv_lib_svld_dlopen" = x""yes; then : lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" else - { $as_echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 $as_echo_n "checking for dld_link in -ldld... " >&6; } -if test "${ac_cv_lib_dld_dld_link+set}" = set; then +if test "${ac_cv_lib_dld_dld_link+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. @@ -12246,43 +11212,18 @@ return dld_link (); return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then +if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dld_dld_link=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_dld_dld_link=no + ac_cv_lib_dld_dld_link=no fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 $as_echo "$ac_cv_lib_dld_dld_link" >&6; } -if test "x$ac_cv_lib_dld_dld_link" = x""yes; then +if test "x$ac_cv_lib_dld_dld_link" = x""yes; then : lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" fi @@ -12321,9 +11262,9 @@ fi save_LIBS="$LIBS" LIBS="$lt_cv_dlopen_libs $LIBS" - { $as_echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 $as_echo_n "checking whether a program can dlopen itself... " >&6; } -if test "${lt_cv_dlopen_self+set}" = set; then +if test "${lt_cv_dlopen_self+set}" = set; then : $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then : @@ -12332,7 +11273,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12335 "configure" +#line 11276 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12391,11 +11332,11 @@ int main () return status; } _LT_EOF - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in @@ -12412,14 +11353,14 @@ rm -fr conftest* fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 $as_echo "$lt_cv_dlopen_self" >&6; } if test "x$lt_cv_dlopen_self" = xyes; then wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" - { $as_echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 $as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } -if test "${lt_cv_dlopen_self_static+set}" = set; then +if test "${lt_cv_dlopen_self_static+set}" = set; then : $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then : @@ -12428,7 +11369,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12431 "configure" +#line 11372 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12487,11 +11428,11 @@ int main () return status; } _LT_EOF - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in @@ -12508,7 +11449,7 @@ rm -fr conftest* fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 $as_echo "$lt_cv_dlopen_self_static" >&6; } fi @@ -12547,12 +11488,12 @@ fi striplib= old_striplib= -{ $as_echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 $as_echo_n "checking whether stripping libraries is possible... " >&6; } if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" test -z "$striplib" && striplib="$STRIP --strip-unneeded" - { $as_echo "$as_me:$LINENO: result: yes" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else # FIXME - insert some real tests, host_os isn't really good enough @@ -12561,15 +11502,15 @@ else if test -n "$STRIP" ; then striplib="$STRIP -x" old_striplib="$STRIP -S" - { $as_echo "$as_me:$LINENO: result: yes" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi ;; *) - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } ;; esac @@ -12587,12 +11528,12 @@ fi # Report which library types will actually be built - { $as_echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 $as_echo_n "checking if libtool supports shared libraries... " >&6; } - { $as_echo "$as_me:$LINENO: result: $can_build_shared" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 $as_echo "$can_build_shared" >&6; } - { $as_echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 $as_echo_n "checking whether to build shared libraries... " >&6; } test "$can_build_shared" = "no" && enable_shared=no @@ -12613,14 +11554,14 @@ $as_echo_n "checking whether to build sh fi ;; esac - { $as_echo "$as_me:$LINENO: result: $enable_shared" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 $as_echo "$enable_shared" >&6; } - { $as_echo "$as_me:$LINENO: checking whether to build static libraries" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 $as_echo_n "checking whether to build static libraries... " >&6; } # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes - { $as_echo "$as_me:$LINENO: result: $enable_static" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 $as_echo "$enable_static" >&6; } @@ -12674,40 +11615,44 @@ LT_AGE=0 pkg_failed=no -{ $as_echo "$as_me:$LINENO: checking for IMAGE" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for IMAGE" >&5 $as_echo_n "checking for IMAGE... " >&6; } -if test -n "$IMAGE_CFLAGS"; then - pkg_cv_IMAGE_CFLAGS="$IMAGE_CFLAGS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libpng >= 1.2.16 \"") >&5 +if test -n "$PKG_CONFIG"; then + if test -n "$IMAGE_CFLAGS"; then + pkg_cv_IMAGE_CFLAGS="$IMAGE_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libpng >= 1.2.16 \""; } >&5 ($PKG_CONFIG --exists --print-errors "libpng >= 1.2.16 ") 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then pkg_cv_IMAGE_CFLAGS=`$PKG_CONFIG --cflags "libpng >= 1.2.16 " 2>/dev/null` else pkg_failed=yes fi - else - pkg_failed=untried + fi +else + pkg_failed=untried fi -if test -n "$IMAGE_LIBS"; then - pkg_cv_IMAGE_LIBS="$IMAGE_LIBS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libpng >= 1.2.16 \"") >&5 +if test -n "$PKG_CONFIG"; then + if test -n "$IMAGE_LIBS"; then + pkg_cv_IMAGE_LIBS="$IMAGE_LIBS" + else + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libpng >= 1.2.16 \""; } >&5 ($PKG_CONFIG --exists --print-errors "libpng >= 1.2.16 ") 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then pkg_cv_IMAGE_LIBS=`$PKG_CONFIG --libs "libpng >= 1.2.16 " 2>/dev/null` else pkg_failed=yes fi - else - pkg_failed=untried + fi +else + pkg_failed=untried fi @@ -12720,25 +11665,14 @@ else _pkg_short_errors_supported=no fi if test $_pkg_short_errors_supported = yes; then - IMAGE_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "libpng >= 1.2.16 " 2>&1` + IMAGE_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "libpng >= 1.2.16 "` else - IMAGE_PKG_ERRORS=`$PKG_CONFIG --print-errors "libpng >= 1.2.16 " 2>&1` + IMAGE_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "libpng >= 1.2.16 "` fi # Put the nasty error message in config.log where it belongs echo "$IMAGE_PKG_ERRORS" >&5 - { { $as_echo "$as_me:$LINENO: error: Package requirements (libpng >= 1.2.16 ) were not met: - -$IMAGE_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -Alternatively, you may set the environment variables IMAGE_CFLAGS -and IMAGE_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" >&5 -$as_echo "$as_me: error: Package requirements (libpng >= 1.2.16 ) were not met: + as_fn_error "Package requirements (libpng >= 1.2.16 ) were not met: $IMAGE_PKG_ERRORS @@ -12748,22 +11682,11 @@ installed software in a non-standard pre Alternatively, you may set the environment variables IMAGE_CFLAGS and IMAGE_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. -" >&2;} - { (exit 1); exit 1; }; } +" "$LINENO" 5 elif test $pkg_failed = untried; then - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables IMAGE_CFLAGS -and IMAGE_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. - -To get pkg-config, see . -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it +as_fn_error "The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. @@ -12772,12 +11695,11 @@ and IMAGE_LIBS to avoid the need to call See the pkg-config man page for more details. To get pkg-config, see . -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; }; } +See \`config.log' for more details." "$LINENO" 5; } else IMAGE_CFLAGS=$pkg_cv_IMAGE_CFLAGS IMAGE_LIBS=$pkg_cv_IMAGE_LIBS - { $as_echo "$as_me:$LINENO: result: yes" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } : fi @@ -12791,7 +11713,7 @@ PLYMOUTH_LIBS="-lm -lrt -ldl" # Check whether --enable-pango was given. -if test "${enable_pango+set}" = set; then +if test "${enable_pango+set}" = set; then : enableval=$enable_pango; enable_pango=$enableval else enable_pango=yes @@ -12809,40 +11731,44 @@ fi if test x$enable_pango = xyes; then pkg_failed=no -{ $as_echo "$as_me:$LINENO: checking for PANGO" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for PANGO" >&5 $as_echo_n "checking for PANGO... " >&6; } -if test -n "$PANGO_CFLAGS"; then - pkg_cv_PANGO_CFLAGS="$PANGO_CFLAGS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"pangocairo >= 1.21.0 \"") >&5 +if test -n "$PKG_CONFIG"; then + if test -n "$PANGO_CFLAGS"; then + pkg_cv_PANGO_CFLAGS="$PANGO_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"pangocairo >= 1.21.0 \""; } >&5 ($PKG_CONFIG --exists --print-errors "pangocairo >= 1.21.0 ") 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then pkg_cv_PANGO_CFLAGS=`$PKG_CONFIG --cflags "pangocairo >= 1.21.0 " 2>/dev/null` else pkg_failed=yes fi - else - pkg_failed=untried + fi +else + pkg_failed=untried fi -if test -n "$PANGO_LIBS"; then - pkg_cv_PANGO_LIBS="$PANGO_LIBS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"pangocairo >= 1.21.0 \"") >&5 +if test -n "$PKG_CONFIG"; then + if test -n "$PANGO_LIBS"; then + pkg_cv_PANGO_LIBS="$PANGO_LIBS" + else + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"pangocairo >= 1.21.0 \""; } >&5 ($PKG_CONFIG --exists --print-errors "pangocairo >= 1.21.0 ") 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then pkg_cv_PANGO_LIBS=`$PKG_CONFIG --libs "pangocairo >= 1.21.0 " 2>/dev/null` else pkg_failed=yes fi - else - pkg_failed=untried + fi +else + pkg_failed=untried fi @@ -12855,25 +11781,14 @@ else _pkg_short_errors_supported=no fi if test $_pkg_short_errors_supported = yes; then - PANGO_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "pangocairo >= 1.21.0 " 2>&1` + PANGO_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "pangocairo >= 1.21.0 "` else - PANGO_PKG_ERRORS=`$PKG_CONFIG --print-errors "pangocairo >= 1.21.0 " 2>&1` + PANGO_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "pangocairo >= 1.21.0 "` fi # Put the nasty error message in config.log where it belongs echo "$PANGO_PKG_ERRORS" >&5 - { { $as_echo "$as_me:$LINENO: error: Package requirements (pangocairo >= 1.21.0 ) were not met: - -$PANGO_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -Alternatively, you may set the environment variables PANGO_CFLAGS -and PANGO_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" >&5 -$as_echo "$as_me: error: Package requirements (pangocairo >= 1.21.0 ) were not met: + as_fn_error "Package requirements (pangocairo >= 1.21.0 ) were not met: $PANGO_PKG_ERRORS @@ -12883,22 +11798,11 @@ installed software in a non-standard pre Alternatively, you may set the environment variables PANGO_CFLAGS and PANGO_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. -" >&2;} - { (exit 1); exit 1; }; } +" "$LINENO" 5 elif test $pkg_failed = untried; then - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables PANGO_CFLAGS -and PANGO_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. - -To get pkg-config, see . -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it +as_fn_error "The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. @@ -12907,12 +11811,11 @@ and PANGO_LIBS to avoid the need to call See the pkg-config man page for more details. To get pkg-config, see . -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; }; } +See \`config.log' for more details." "$LINENO" 5; } else PANGO_CFLAGS=$pkg_cv_PANGO_CFLAGS PANGO_LIBS=$pkg_cv_PANGO_LIBS - { $as_echo "$as_me:$LINENO: result: yes" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } : fi @@ -12922,40 +11825,44 @@ fi pkg_failed=no -{ $as_echo "$as_me:$LINENO: checking for GTK" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GTK" >&5 $as_echo_n "checking for GTK... " >&6; } -if test -n "$GTK_CFLAGS"; then - pkg_cv_GTK_CFLAGS="$GTK_CFLAGS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gtk+-2.0 >= 2.12.0 \"") >&5 +if test -n "$PKG_CONFIG"; then + if test -n "$GTK_CFLAGS"; then + pkg_cv_GTK_CFLAGS="$GTK_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gtk+-2.0 >= 2.12.0 \""; } >&5 ($PKG_CONFIG --exists --print-errors "gtk+-2.0 >= 2.12.0 ") 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then pkg_cv_GTK_CFLAGS=`$PKG_CONFIG --cflags "gtk+-2.0 >= 2.12.0 " 2>/dev/null` else pkg_failed=yes fi - else - pkg_failed=untried + fi +else + pkg_failed=untried fi -if test -n "$GTK_LIBS"; then - pkg_cv_GTK_LIBS="$GTK_LIBS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gtk+-2.0 >= 2.12.0 \"") >&5 +if test -n "$PKG_CONFIG"; then + if test -n "$GTK_LIBS"; then + pkg_cv_GTK_LIBS="$GTK_LIBS" + else + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gtk+-2.0 >= 2.12.0 \""; } >&5 ($PKG_CONFIG --exists --print-errors "gtk+-2.0 >= 2.12.0 ") 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then pkg_cv_GTK_LIBS=`$PKG_CONFIG --libs "gtk+-2.0 >= 2.12.0 " 2>/dev/null` else pkg_failed=yes fi - else - pkg_failed=untried + fi +else + pkg_failed=untried fi @@ -12968,25 +11875,14 @@ else _pkg_short_errors_supported=no fi if test $_pkg_short_errors_supported = yes; then - GTK_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "gtk+-2.0 >= 2.12.0 " 2>&1` + GTK_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "gtk+-2.0 >= 2.12.0 "` else - GTK_PKG_ERRORS=`$PKG_CONFIG --print-errors "gtk+-2.0 >= 2.12.0 " 2>&1` + GTK_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "gtk+-2.0 >= 2.12.0 "` fi # Put the nasty error message in config.log where it belongs echo "$GTK_PKG_ERRORS" >&5 - { { $as_echo "$as_me:$LINENO: error: Package requirements (gtk+-2.0 >= 2.12.0 ) were not met: - -$GTK_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -Alternatively, you may set the environment variables GTK_CFLAGS -and GTK_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" >&5 -$as_echo "$as_me: error: Package requirements (gtk+-2.0 >= 2.12.0 ) were not met: + as_fn_error "Package requirements (gtk+-2.0 >= 2.12.0 ) were not met: $GTK_PKG_ERRORS @@ -12996,22 +11892,11 @@ installed software in a non-standard pre Alternatively, you may set the environment variables GTK_CFLAGS and GTK_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. -" >&2;} - { (exit 1); exit 1; }; } +" "$LINENO" 5 elif test $pkg_failed = untried; then - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables GTK_CFLAGS -and GTK_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. - -To get pkg-config, see . -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it +as_fn_error "The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. @@ -13020,12 +11905,11 @@ and GTK_LIBS to avoid the need to call p See the pkg-config man page for more details. To get pkg-config, see . -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; }; } +See \`config.log' for more details." "$LINENO" 5; } else GTK_CFLAGS=$pkg_cv_GTK_CFLAGS GTK_LIBS=$pkg_cv_GTK_LIBS - { $as_echo "$as_me:$LINENO: result: yes" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } : fi @@ -13034,40 +11918,44 @@ fi pkg_failed=no -{ $as_echo "$as_me:$LINENO: checking for DRM" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for DRM" >&5 $as_echo_n "checking for DRM... " >&6; } -if test -n "$DRM_CFLAGS"; then - pkg_cv_DRM_CFLAGS="$DRM_CFLAGS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libdrm libdrm_intel libdrm_radeon libdrm_nouveau\"") >&5 +if test -n "$PKG_CONFIG"; then + if test -n "$DRM_CFLAGS"; then + pkg_cv_DRM_CFLAGS="$DRM_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libdrm libdrm_intel libdrm_radeon libdrm_nouveau\""; } >&5 ($PKG_CONFIG --exists --print-errors "libdrm libdrm_intel libdrm_radeon libdrm_nouveau") 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then pkg_cv_DRM_CFLAGS=`$PKG_CONFIG --cflags "libdrm libdrm_intel libdrm_radeon libdrm_nouveau" 2>/dev/null` else pkg_failed=yes fi - else - pkg_failed=untried + fi +else + pkg_failed=untried fi -if test -n "$DRM_LIBS"; then - pkg_cv_DRM_LIBS="$DRM_LIBS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libdrm libdrm_intel libdrm_radeon libdrm_nouveau\"") >&5 +if test -n "$PKG_CONFIG"; then + if test -n "$DRM_LIBS"; then + pkg_cv_DRM_LIBS="$DRM_LIBS" + else + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libdrm libdrm_intel libdrm_radeon libdrm_nouveau\""; } >&5 ($PKG_CONFIG --exists --print-errors "libdrm libdrm_intel libdrm_radeon libdrm_nouveau") 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then pkg_cv_DRM_LIBS=`$PKG_CONFIG --libs "libdrm libdrm_intel libdrm_radeon libdrm_nouveau" 2>/dev/null` else pkg_failed=yes fi - else - pkg_failed=untried + fi +else + pkg_failed=untried fi @@ -13080,25 +11968,14 @@ else _pkg_short_errors_supported=no fi if test $_pkg_short_errors_supported = yes; then - DRM_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "libdrm libdrm_intel libdrm_radeon libdrm_nouveau" 2>&1` + DRM_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "libdrm libdrm_intel libdrm_radeon libdrm_nouveau"` else - DRM_PKG_ERRORS=`$PKG_CONFIG --print-errors "libdrm libdrm_intel libdrm_radeon libdrm_nouveau" 2>&1` + DRM_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "libdrm libdrm_intel libdrm_radeon libdrm_nouveau"` fi # Put the nasty error message in config.log where it belongs echo "$DRM_PKG_ERRORS" >&5 - { { $as_echo "$as_me:$LINENO: error: Package requirements (libdrm libdrm_intel libdrm_radeon libdrm_nouveau) were not met: - -$DRM_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -Alternatively, you may set the environment variables DRM_CFLAGS -and DRM_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" >&5 -$as_echo "$as_me: error: Package requirements (libdrm libdrm_intel libdrm_radeon libdrm_nouveau) were not met: + as_fn_error "Package requirements (libdrm libdrm_intel libdrm_radeon libdrm_nouveau) were not met: $DRM_PKG_ERRORS @@ -13108,22 +11985,11 @@ installed software in a non-standard pre Alternatively, you may set the environment variables DRM_CFLAGS and DRM_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. -" >&2;} - { (exit 1); exit 1; }; } +" "$LINENO" 5 elif test $pkg_failed = untried; then - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables DRM_CFLAGS -and DRM_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. - -To get pkg-config, see . -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it +as_fn_error "The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. @@ -13132,25 +11998,20 @@ and DRM_LIBS to avoid the need to call p See the pkg-config man page for more details. To get pkg-config, see . -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; }; } +See \`config.log' for more details." "$LINENO" 5; } else DRM_CFLAGS=$pkg_cv_DRM_CFLAGS DRM_LIBS=$pkg_cv_DRM_LIBS - { $as_echo "$as_me:$LINENO: result: yes" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } : fi OLD_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS $DRM_CFLAGS" -{ $as_echo "$as_me:$LINENO: checking if i915_drm.h, radeon_drm.h and nouveau_drm.h are in include path" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if i915_drm.h, radeon_drm.h and nouveau_drm.h are in include path" >&5 $as_echo_n "checking if i915_drm.h, radeon_drm.h and nouveau_drm.h are in include path... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include @@ -13166,51 +12027,26 @@ main () ; return 0; } -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : found_drm_kernel_headers=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - found_drm_kernel_headers=no + found_drm_kernel_headers=no fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test "$found_drm_kernel_headers" = "yes"; then - { $as_echo "$as_me:$LINENO: result: yes" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } - { $as_echo "$as_me:$LINENO: checking if we can find them anyway" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can find them anyway" >&5 $as_echo_n "checking if we can find them anyway... " >&6; } MORE_DRM_CFLAGS="-I`$PKG_CONFIG --variable includedir libdrm`/drm" CFLAGS="$CFLAGS $MORE_DRM_CFLAGS" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include @@ -13227,44 +12063,21 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then +if ac_fn_c_try_compile "$LINENO"; then : found_drm_kernel_headers=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - found_drm_kernel_headers=no + found_drm_kernel_headers=no fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test "$found_drm_kernel_headers" = "yes"; then - { $as_echo "$as_me:$LINENO: result: yes" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } DRM_CFLAGS="$DRM_CFLAGS $MORE_DRM_CFLAGS" else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } - { { $as_echo "$as_me:$LINENO: error: Could not find i915_drm.h, radeon_drm.h and/or nouveau_drm.h" >&5 -$as_echo "$as_me: error: Could not find i915_drm.h, radeon_drm.h and/or nouveau_drm.h" >&2;} - { (exit 1); exit 1; }; } + as_fn_error "Could not find i915_drm.h, radeon_drm.h and/or nouveau_drm.h" "$LINENO" 5 fi fi CFLAGS="$OLD_CFLAGS" @@ -13272,7 +12085,7 @@ CFLAGS="$OLD_CFLAGS" # Check whether --enable-tracing was given. -if test "${enable_tracing+set}" = set; then +if test "${enable_tracing+set}" = set; then : enableval=$enable_tracing; enable_tracing=$enableval else enable_tracing=yes @@ -13281,14 +12094,12 @@ fi if test x$enable_tracing = xyes; then -cat >>confdefs.h <<\_ACEOF -#define PLY_ENABLE_TRACING 1 -_ACEOF +$as_echo "#define PLY_ENABLE_TRACING 1" >>confdefs.h fi # Check whether --enable-tests was given. -if test "${enable_tests+set}" = set; then +if test "${enable_tests+set}" = set; then : enableval=$enable_tests; enable_tests=$enableval else enable_tests=yes @@ -13305,7 +12116,7 @@ fi # Check whether --enable-gdm-transition was given. -if test "${enable_gdm_transition+set}" = set; then +if test "${enable_gdm_transition+set}" = set; then : enableval=$enable_gdm_transition; enable_gdm_transition=$enableval else enable_gdm_transition=no @@ -13314,15 +12125,13 @@ fi if test x$enable_gdm_transition = xyes; then -cat >>confdefs.h <<\_ACEOF -#define PLY_ENABLE_GDM_TRANSITION 1 -_ACEOF +$as_echo "#define PLY_ENABLE_GDM_TRANSITION 1" >>confdefs.h fi # Check whether --with-system-root-install was given. -if test "${with_system_root_install+set}" = set; then +if test "${with_system_root_install+set}" = set; then : withval=$with_system_root_install; with_system_root_install=${withval} else with_system_root_install=yes @@ -13349,7 +12158,7 @@ fi # Check whether --with-rhgb-compat-link was given. -if test "${with_rhgb_compat_link+set}" = set; then +if test "${with_rhgb_compat_link+set}" = set; then : withval=$with_rhgb_compat_link; with_rhgb_compat_link=${withval} else with_rhgb_compat_link=yes @@ -13366,7 +12175,7 @@ fi # Check whether --with-gdm-autostart-file was given. -if test "${with_gdm_autostart_file+set}" = set; then +if test "${with_gdm_autostart_file+set}" = set; then : withval=$with_gdm_autostart_file; with_gdm_autostart_file=$withval else with_gdm_autostart_file=yes @@ -13384,7 +12193,7 @@ fi # Check whether --with-logo was given. -if test "${with_logo+set}" = set; then +if test "${with_logo+set}" = set; then : withval=$with_logo; logofile=${withval} else logofile=$datadir/plymouth/bizcom.png @@ -13403,7 +12212,7 @@ fi # Check whether --with-background-color was given. -if test "${with_background_color+set}" = set; then +if test "${with_background_color+set}" = set; then : withval=$with_background_color; background_color=${withval} else background_color=0x5d5950 @@ -13413,7 +12222,7 @@ fi # Check whether --with-background-start-color-stop was given. -if test "${with_background_start_color_stop+set}" = set; then +if test "${with_background_start_color_stop+set}" = set; then : withval=$with_background_start_color_stop; background_start_color=${withval} else background_start_color=0x807c71 @@ -13423,7 +12232,7 @@ fi # Check whether --with-background-end-color-stop was given. -if test "${with_background_end_color_stop+set}" = set; then +if test "${with_background_end_color_stop+set}" = set; then : withval=$with_background_end_color_stop; background_end_color=${withval} else background_end_color=0x3a362f @@ -13433,7 +12242,7 @@ fi # Check whether --with-release-file was given. -if test "${with_release_file+set}" = set; then +if test "${with_release_file+set}" = set; then : withval=$with_release_file; RELEASE_FILE=${withval} else RELEASE_FILE=/etc/system-release @@ -13449,7 +12258,7 @@ _ACEOF # Check whether --with-boot-tty was given. -if test "${with_boot_tty+set}" = set; then +if test "${with_boot_tty+set}" = set; then : withval=$with_boot_tty; BOOT_TTY=${withval} else BOOT_TTY=/dev/tty1 @@ -13463,7 +12272,7 @@ _ACEOF # Check whether --with-shutdown-tty was given. -if test "${with_shutdown_tty+set}" = set; then +if test "${with_shutdown_tty+set}" = set; then : withval=$with_shutdown_tty; SHUTDOWN_TTY=${withval} else SHUTDOWN_TTY=/dev/tty63 @@ -13475,12 +12284,33 @@ cat >>confdefs.h <<_ACEOF _ACEOF +for ac_header in sys/io.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "sys/io.h" "ac_cv_header_sys_io_h" "$ac_includes_default" +if test "x$ac_cv_header_sys_io_h" = x""yes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_SYS_IO_H 1 +_ACEOF + +fi + +done + + if test "x$ac_cv_header_sys_io_h" = xyes; then + BUILD_VGA16FB_TRUE= + BUILD_VGA16FB_FALSE='#' +else + BUILD_VGA16FB_TRUE='#' + BUILD_VGA16FB_FALSE= +fi + + # Turn on the additional warnings last, so -Werror doesn't affect other tests. # Check whether --enable-more-warnings was given. -if test "${enable_more_warnings+set}" = set; then +if test "${enable_more_warnings+set}" = set; then : enableval=$enable_more_warnings; set_more_warnings="$enableval" else @@ -13492,10 +12322,10 @@ else fi -{ $as_echo "$as_me:$LINENO: checking for more warnings" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for more warnings" >&5 $as_echo_n "checking for more warnings... " >&6; } if test "$GCC" = "yes" -a "$set_more_warnings" != "no"; then - { $as_echo "$as_me:$LINENO: result: yes" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } MAYBE_WARN="\ -Wall -Wextra \ @@ -13505,11 +12335,11 @@ $as_echo "yes" >&6; } -Wno-missing-field-initializers -Wno-unused-parameter \ -Wcast-align -Wsign-compare -Wp,-D_FORTIFY_SOURCE=2" elif test "$GCC" = "yes"; then - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } MAYBE_WARN="-Wall -Wno-sign-compare -Wno-deprecated-declarations" else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -13517,9 +12347,9 @@ fi if test "x$plymouth_cv_warn_maybe" != "x$MAYBE_WARN"; then unset plymouth_cv_warn_cflags fi -{ $as_echo "$as_me:$LINENO: checking for supported warning flags" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for supported warning flags" >&5 $as_echo_n "checking for supported warning flags... " >&6; } -if test "${plymouth_cv_warn_cflags+set}" = set; then +if test "${plymouth_cv_warn_cflags+set}" = set; then : $as_echo_n "(cached) " >&6 else @@ -13539,41 +12369,21 @@ else for W in $MAYBE_WARN; do - { $as_echo "$as_me:$LINENO: checking whether $CC supports $W" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC supports $W" >&5 $as_echo_n "checking whether $CC supports $W... " >&6; } plymouth_save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS $W" - cat >conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then +if ac_fn_c_try_compile "$LINENO"; then : plymouth_cc_flag=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - plymouth_cc_flag=no + plymouth_cc_flag=no fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext CFLAGS="$plymouth_save_CFLAGS" @@ -13582,7 +12392,7 @@ rm -f core conftest.err conftest.$ac_obj else : fi - { $as_echo "$as_me:$LINENO: result: $plymouth_cc_flag" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $plymouth_cc_flag" >&5 $as_echo "$plymouth_cc_flag" >&6; } done @@ -13590,10 +12400,10 @@ $as_echo "$plymouth_cc_flag" >&6; } plymouth_cv_warn_cflags=$WARN_CFLAGS plymouth_cv_warn_maybe=$MAYBE_WARN - { $as_echo "$as_me:$LINENO: checking which warning flags were supported" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking which warning flags were supported" >&5 $as_echo_n "checking which warning flags were supported... " >&6; } fi -{ $as_echo "$as_me:$LINENO: result: $plymouth_cv_warn_cflags" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $plymouth_cv_warn_cflags" >&5 $as_echo "$plymouth_cv_warn_cflags" >&6; } WARN_CFLAGS="$plymouth_cv_warn_cflags" @@ -13804,7 +12614,7 @@ plymouthconfdir=$sysconfdir/plymouth/ exec_prefix=$exec_prefix_save -ac_config_files="$ac_config_files Makefile src/libply/Makefile src/libply-splash-core/Makefile src/libply-splash-graphics/Makefile src/ply-splash-core.pc src/ply-splash-graphics.pc src/plugins/Makefile src/plugins/renderers/Makefile src/plugins/renderers/frame-buffer/Makefile src/plugins/renderers/drm/Makefile src/plugins/renderers/x11/Makefile src/plugins/splash/Makefile src/plugins/splash/throbgress/Makefile src/plugins/splash/fade-throbber/Makefile src/plugins/splash/text/Makefile src/plugins/splash/details/Makefile src/plugins/splash/space-flares/Makefile src/plugins/splash/two-step/Makefile src/plugins/splash/script/Makefile src/plugins/controls/Makefile src/plugins/controls/label/Makefile src/Makefile src/client/ply-boot-client.pc src/client/Makefile src/viewer/Makefile src/tests/Makefile src/libply/tests/Makefile src/client/tests/Makefile themes/Makefile themes/spinfinity/Makefile themes/fade-in/Makefile themes/text/Makefile themes/details/Makefile themes/solar/Makefile themes/glow/Makefile themes/script/Makefile images/Makefile scripts/plymouth-generate-initrd scripts/plymouth-populate-initrd scripts/plymouth-set-default-theme scripts/Makefile docs/Makefile" +ac_config_files="$ac_config_files Makefile src/libply/Makefile src/libply-splash-core/Makefile src/libply-splash-graphics/Makefile src/ply-splash-core.pc src/ply-splash-graphics.pc src/plugins/Makefile src/plugins/renderers/Makefile src/plugins/renderers/frame-buffer/Makefile src/plugins/renderers/drm/Makefile src/plugins/renderers/x11/Makefile src/plugins/renderers/vga16fb/Makefile src/plugins/splash/Makefile src/plugins/splash/throbgress/Makefile src/plugins/splash/fade-throbber/Makefile src/plugins/splash/ubuntu-text/Makefile src/plugins/splash/text/Makefile src/plugins/splash/details/Makefile src/plugins/splash/space-flares/Makefile src/plugins/splash/two-step/Makefile src/plugins/splash/script/Makefile src/plugins/controls/Makefile src/plugins/controls/label/Makefile src/Makefile src/client/ply-boot-client.pc src/client/Makefile src/viewer/Makefile src/tests/Makefile src/libply/tests/Makefile src/client/tests/Makefile themes/Makefile themes/spinfinity/Makefile themes/fade-in/Makefile themes/text/Makefile themes/details/Makefile themes/solar/Makefile themes/glow/Makefile themes/script/Makefile themes/ubuntu-logo/Makefile themes/ubuntu-text/Makefile images/Makefile scripts/plymouth-generate-initrd scripts/plymouth-populate-initrd scripts/plymouth-set-default-theme scripts/Makefile docs/Makefile" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure @@ -13833,13 +12643,13 @@ _ACEOF case $ac_val in #( *${as_nl}*) case $ac_var in #( - *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5 + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) $as_unset $ac_var ;; + *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done @@ -13847,8 +12657,8 @@ $as_echo "$as_me: WARNING: cache variabl (set) 2>&1 | case $as_nl`(ac_space=' '; set) 2>&1` in #( *${as_nl}ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \). + # `set' does not quote correctly, so add quotes: double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \. sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" @@ -13871,11 +12681,11 @@ $as_echo "$as_me: WARNING: cache variabl if diff "$cache_file" confcache >/dev/null 2>&1; then :; else if test -w "$cache_file"; then test "x$cache_file" != "x/dev/null" && - { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 $as_echo "$as_me: updating cache $cache_file" >&6;} cat confcache >$cache_file else - { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 $as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} fi fi @@ -13895,8 +12705,8 @@ for ac_i in : $LIBOBJS; do test "x$ac_i" ac_i=`$as_echo "$ac_i" | sed "$ac_script"` # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR # will be set to the directory where LIBOBJS objects are built. - ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" - ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' + as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" + as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' done LIBOBJS=$ac_libobjs @@ -13904,18 +12714,12 @@ LTLIBOBJS=$ac_ltlibobjs if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then - { { $as_echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -$as_echo "$as_me: error: conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } + as_fn_error "conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then - { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -$as_echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } + as_fn_error "conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -n "$EXEEXT"; then am__EXEEXT_TRUE= @@ -13926,62 +12730,46 @@ else fi if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then - { { $as_echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -$as_echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } + as_fn_error "conditional \"MAINTAINER_MODE\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${ENABLE_PANGO_TRUE}" && test -z "${ENABLE_PANGO_FALSE}"; then - { { $as_echo "$as_me:$LINENO: error: conditional \"ENABLE_PANGO\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -$as_echo "$as_me: error: conditional \"ENABLE_PANGO\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } + as_fn_error "conditional \"ENABLE_PANGO\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${ENABLE_TESTS_TRUE}" && test -z "${ENABLE_TESTS_FALSE}"; then - { { $as_echo "$as_me:$LINENO: error: conditional \"ENABLE_TESTS\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -$as_echo "$as_me: error: conditional \"ENABLE_TESTS\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } + as_fn_error "conditional \"ENABLE_TESTS\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${WITH_SYSTEM_ROOT_INSTALL_TRUE}" && test -z "${WITH_SYSTEM_ROOT_INSTALL_FALSE}"; then - { { $as_echo "$as_me:$LINENO: error: conditional \"WITH_SYSTEM_ROOT_INSTALL\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -$as_echo "$as_me: error: conditional \"WITH_SYSTEM_ROOT_INSTALL\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } + as_fn_error "conditional \"WITH_SYSTEM_ROOT_INSTALL\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${WITH_RHGB_COMPAT_LINK_TRUE}" && test -z "${WITH_RHGB_COMPAT_LINK_FALSE}"; then - { { $as_echo "$as_me:$LINENO: error: conditional \"WITH_RHGB_COMPAT_LINK\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -$as_echo "$as_me: error: conditional \"WITH_RHGB_COMPAT_LINK\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } + as_fn_error "conditional \"WITH_RHGB_COMPAT_LINK\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${START_FROM_GDM_TRUE}" && test -z "${START_FROM_GDM_FALSE}"; then - { { $as_echo "$as_me:$LINENO: error: conditional \"START_FROM_GDM\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -$as_echo "$as_me: error: conditional \"START_FROM_GDM\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } + as_fn_error "conditional \"START_FROM_GDM\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${INSTALL_FALLBACK_LOGO_TRUE}" && test -z "${INSTALL_FALLBACK_LOGO_FALSE}"; then - { { $as_echo "$as_me:$LINENO: error: conditional \"INSTALL_FALLBACK_LOGO\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -$as_echo "$as_me: error: conditional \"INSTALL_FALLBACK_LOGO\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } + as_fn_error "conditional \"INSTALL_FALLBACK_LOGO\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${BUILD_VGA16FB_TRUE}" && test -z "${BUILD_VGA16FB_FALSE}"; then + as_fn_error "conditional \"BUILD_VGA16FB\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi : ${CONFIG_STATUS=./config.status} ac_write_fail=0 ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 $as_echo "$as_me: creating $CONFIG_STATUS" >&6;} -cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +as_write_fail=0 +cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. @@ -13991,17 +12779,18 @@ cat >$CONFIG_STATUS <<_ACEOF || ac_write debug=false ac_cs_recheck=false ac_cs_silent=false -SHELL=\${CONFIG_SHELL-$SHELL} -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which @@ -14009,23 +12798,15 @@ if test -n "${ZSH_VERSION+set}" && (emul alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else - case `(set -o) 2>/dev/null` in - *posix*) set -o posix ;; + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; esac - fi - - -# PATH needs CR -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - as_nl=' ' export as_nl @@ -14033,7 +12814,13 @@ export as_nl as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else @@ -14044,7 +12831,7 @@ else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; - case $arg in + case $arg in #( *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; @@ -14067,13 +12854,6 @@ if test "${PATH_SEPARATOR+set}" != set; } fi -# Support unset when possible. -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false -fi - # IFS # We need space, tab and new line, in precisely that order. Quoting is @@ -14083,15 +12863,15 @@ fi IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. -case $0 in +case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done IFS=$as_save_IFS ;; @@ -14103,12 +12883,16 @@ if test "x$as_myself" = x; then fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - { (exit 1); exit 1; } + exit 1 fi -# Work around bugs in pre-3.0 UWIN ksh. -for as_var in ENV MAIL MAILPATH -do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' @@ -14120,7 +12904,89 @@ export LC_ALL LANGUAGE=C export LANGUAGE -# Required to use basename. +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + + +# as_fn_error ERROR [LINENO LOG_FD] +# --------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with status $?, using 1 if that was 0. +as_fn_error () +{ + as_status=$?; test $as_status -eq 0 && as_status=1 + if test "$3"; then + as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3 + fi + $as_echo "$as_me: error: $1" >&2 + as_fn_exit $as_status +} # as_fn_error + + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr @@ -14134,8 +13000,12 @@ else as_basename=false fi +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi -# Name of the executable. as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ @@ -14155,76 +13025,25 @@ $as_echo X/"$0" | } s/.*/./; q'` -# CDPATH. -$as_unset CDPATH - - - - as_lineno_1=$LINENO - as_lineno_2=$LINENO - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line after each line using $LINENO; the second 'sed' - # does the real work. The second script uses 'N' to pair each - # line-number line with the line containing $LINENO, and appends - # trailing '-' during substitution so that $LINENO is not a special - # case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # scripts with optimization help from Paolo Bonzini. Blame Lee - # E. McMahon (1931-1989) for sed's syntax. :-) - sed -n ' - p - /[$]LINENO/= - ' <$as_myself | - sed ' - s/[$]LINENO.*/&-/ - t lineno - b - :lineno - N - :loop - s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop - s/-\n.*// - ' >$as_me.lineno && - chmod +x "$as_me.lineno" || - { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 - { (exit 1); exit 1; }; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensitive to this). - . "./$as_me.lineno" - # Exit status is that of the last command. - exit -} - - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in +case `echo -n x` in #((((( -n*) - case `echo 'x\c'` in + case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. - *) ECHO_C='\c';; + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then @@ -14253,8 +13072,56 @@ fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir" + + +} # as_fn_mkdir_p if mkdir -p . 2>/dev/null; then - as_mkdir_p=: + as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false @@ -14273,10 +13140,10 @@ else if test -d "$1"; then test -d "$1/."; else - case $1 in + case $1 in #( -*)set "./$1";; esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( ???[sx]*):;;*)false;;esac;fi '\'' sh ' @@ -14291,13 +13158,19 @@ as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr exec 6>&1 +## ----------------------------------- ## +## Main body of $CONFIG_STATUS script. ## +## ----------------------------------- ## +_ASEOF +test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 -# Save the log message, to keep $[0] and so on meaningful, and to +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# Save the log message, to keep $0 and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" This file was extended by plymouth $as_me 0.8.2, which was -generated by GNU Autoconf 2.63. Invocation command line was +generated by GNU Autoconf 2.65. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS @@ -14329,13 +13202,15 @@ _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ac_cs_usage="\ -\`$as_me' instantiates files from templates according to the -current configuration. +\`$as_me' instantiates files and other configuration actions +from templates according to the current configuration. Unless the files +and actions are specified as TAGs, all are instantiated by default. -Usage: $0 [OPTION]... [FILE]... +Usage: $0 [OPTION]... [TAG]... -h, --help print this help, then exit -V, --version print version number and configuration settings, then exit + --config print configuration, then exit -q, --quiet, --silent do not print progress messages -d, --debug don't remove temporary files @@ -14354,16 +13229,17 @@ $config_headers Configuration commands: $config_commands -Report bugs to ." +Report bugs to ." _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ plymouth config.status 0.8.2 -configured by $0, generated by GNU Autoconf 2.63, - with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" +configured by $0, generated by GNU Autoconf 2.65, + with options \\"\$ac_cs_config\\" -Copyright (C) 2008 Free Software Foundation, Inc. +Copyright (C) 2009 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." @@ -14399,6 +13275,8 @@ do ac_cs_recheck=: ;; --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) $as_echo "$ac_cs_version"; exit ;; + --config | --confi | --conf | --con | --co | --c ) + $as_echo "$ac_cs_config"; exit ;; --debug | --debu | --deb | --de | --d | -d ) debug=: ;; --file | --fil | --fi | --f ) @@ -14406,20 +13284,19 @@ do case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; esac - CONFIG_FILES="$CONFIG_FILES '$ac_optarg'" + as_fn_append CONFIG_FILES " '$ac_optarg'" ac_need_defaults=false;; --header | --heade | --head | --hea ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; esac - CONFIG_HEADERS="$CONFIG_HEADERS '$ac_optarg'" + as_fn_append CONFIG_HEADERS " '$ac_optarg'" ac_need_defaults=false;; --he | --h) # Conflict between --help and --header - { $as_echo "$as_me: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; };; + as_fn_error "ambiguous option: \`$1' +Try \`$0 --help' for more information.";; --help | --hel | -h ) $as_echo "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ @@ -14427,11 +13304,10 @@ Try \`$0 --help' for more information." ac_cs_silent=: ;; # This is an error. - -*) { $as_echo "$as_me: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; } ;; + -*) as_fn_error "unrecognized option: \`$1' +Try \`$0 --help' for more information." ;; - *) ac_config_targets="$ac_config_targets $1" + *) as_fn_append ac_config_targets " $1" ac_need_defaults=false ;; esac @@ -14751,9 +13627,11 @@ do "src/plugins/renderers/frame-buffer/Makefile") CONFIG_FILES="$CONFIG_FILES src/plugins/renderers/frame-buffer/Makefile" ;; "src/plugins/renderers/drm/Makefile") CONFIG_FILES="$CONFIG_FILES src/plugins/renderers/drm/Makefile" ;; "src/plugins/renderers/x11/Makefile") CONFIG_FILES="$CONFIG_FILES src/plugins/renderers/x11/Makefile" ;; + "src/plugins/renderers/vga16fb/Makefile") CONFIG_FILES="$CONFIG_FILES src/plugins/renderers/vga16fb/Makefile" ;; "src/plugins/splash/Makefile") CONFIG_FILES="$CONFIG_FILES src/plugins/splash/Makefile" ;; "src/plugins/splash/throbgress/Makefile") CONFIG_FILES="$CONFIG_FILES src/plugins/splash/throbgress/Makefile" ;; "src/plugins/splash/fade-throbber/Makefile") CONFIG_FILES="$CONFIG_FILES src/plugins/splash/fade-throbber/Makefile" ;; + "src/plugins/splash/ubuntu-text/Makefile") CONFIG_FILES="$CONFIG_FILES src/plugins/splash/ubuntu-text/Makefile" ;; "src/plugins/splash/text/Makefile") CONFIG_FILES="$CONFIG_FILES src/plugins/splash/text/Makefile" ;; "src/plugins/splash/details/Makefile") CONFIG_FILES="$CONFIG_FILES src/plugins/splash/details/Makefile" ;; "src/plugins/splash/space-flares/Makefile") CONFIG_FILES="$CONFIG_FILES src/plugins/splash/space-flares/Makefile" ;; @@ -14776,6 +13654,8 @@ do "themes/solar/Makefile") CONFIG_FILES="$CONFIG_FILES themes/solar/Makefile" ;; "themes/glow/Makefile") CONFIG_FILES="$CONFIG_FILES themes/glow/Makefile" ;; "themes/script/Makefile") CONFIG_FILES="$CONFIG_FILES themes/script/Makefile" ;; + "themes/ubuntu-logo/Makefile") CONFIG_FILES="$CONFIG_FILES themes/ubuntu-logo/Makefile" ;; + "themes/ubuntu-text/Makefile") CONFIG_FILES="$CONFIG_FILES themes/ubuntu-text/Makefile" ;; "images/Makefile") CONFIG_FILES="$CONFIG_FILES images/Makefile" ;; "scripts/plymouth-generate-initrd") CONFIG_FILES="$CONFIG_FILES scripts/plymouth-generate-initrd" ;; "scripts/plymouth-populate-initrd") CONFIG_FILES="$CONFIG_FILES scripts/plymouth-populate-initrd" ;; @@ -14783,9 +13663,7 @@ do "scripts/Makefile") CONFIG_FILES="$CONFIG_FILES scripts/Makefile" ;; "docs/Makefile") CONFIG_FILES="$CONFIG_FILES docs/Makefile" ;; - *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 -$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;} - { (exit 1); exit 1; }; };; + *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;; esac done @@ -14812,7 +13690,7 @@ $debug || trap 'exit_status=$? { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status ' 0 - trap '{ (exit 1); exit 1; }' 1 2 13 15 + trap 'as_fn_exit 1' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. @@ -14823,11 +13701,7 @@ $debug || { tmp=./conf$$-$RANDOM (umask 077 && mkdir "$tmp") -} || -{ - $as_echo "$as_me: cannot create a temporary directory in ." >&2 - { (exit 1); exit 1; } -} +} || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5 # Set up the scripts for CONFIG_FILES section. # No need to generate them if there are no CONFIG_FILES. @@ -14835,10 +13709,16 @@ $debug || if test -n "$CONFIG_FILES"; then -ac_cr=' ' +ac_cr=`echo X | tr X '\015'` +# On cygwin, bash can eat \r inside `` if the user requested igncr. +# But we know of no other shell where ac_cr would be empty at this +# point, so we can use a bashism as a fallback. +if test "x$ac_cr" = x; then + eval ac_cr=\$\'\\r\' +fi ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then - ac_cs_awk_cr='\\r' + ac_cs_awk_cr='\r' else ac_cs_awk_cr=$ac_cr fi @@ -14852,24 +13732,18 @@ _ACEOF echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && echo "_ACEOF" } >conf$$subs.sh || - { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 -$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} - { (exit 1); exit 1; }; } + as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'` ac_delim='%!_!# ' for ac_last_try in false false false false false :; do . ./conf$$subs.sh || - { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 -$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} - { (exit 1); exit 1; }; } + as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` if test $ac_delim_n = $ac_delim_num; then break elif $ac_last_try; then - { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 -$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} - { (exit 1); exit 1; }; } + as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi @@ -14891,7 +13765,7 @@ s/'"$ac_delim"'$// t delim :nl h -s/\(.\{148\}\).*/\1/ +s/\(.\{148\}\)..*/\1/ t more1 s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ p @@ -14905,7 +13779,7 @@ s/.\{148\}// t nl :delim h -s/\(.\{148\}\).*/\1/ +s/\(.\{148\}\)..*/\1/ t more2 s/["\\]/\\&/g; s/^/"/; s/$/"/ p @@ -14958,9 +13832,7 @@ if sed "s/$ac_cr//" < /dev/null > /dev/n else cat fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ - || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5 -$as_echo "$as_me: error: could not setup config files machinery" >&2;} - { (exit 1); exit 1; }; } + || as_fn_error "could not setup config files machinery" "$LINENO" 5 _ACEOF # VPATH may cause trouble with some makes, so we remove $(srcdir), @@ -15001,9 +13873,7 @@ for ac_last_try in false false :; do if test -z "$ac_t"; then break elif $ac_last_try; then - { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_HEADERS" >&5 -$as_echo "$as_me: error: could not make $CONFIG_HEADERS" >&2;} - { (exit 1); exit 1; }; } + as_fn_error "could not make $CONFIG_HEADERS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi @@ -15088,9 +13958,7 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_writ _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - { { $as_echo "$as_me:$LINENO: error: could not setup config headers machinery" >&5 -$as_echo "$as_me: error: could not setup config headers machinery" >&2;} - { (exit 1); exit 1; }; } + as_fn_error "could not setup config headers machinery" "$LINENO" 5 fi # test -n "$CONFIG_HEADERS" @@ -15103,9 +13971,7 @@ do esac case $ac_mode$ac_tag in :[FHL]*:*);; - :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5 -$as_echo "$as_me: error: invalid tag $ac_tag" >&2;} - { (exit 1); exit 1; }; };; + :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;; :[FH]-) ac_tag=-:-;; :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; esac @@ -15133,12 +13999,10 @@ $as_echo "$as_me: error: invalid tag $ac [\\/$]*) false;; *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; esac || - { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 -$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;} - { (exit 1); exit 1; }; };; + as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;; esac case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac - ac_file_inputs="$ac_file_inputs '$ac_f'" + as_fn_append ac_file_inputs " '$ac_f'" done # Let's still pretend it is `configure' which instantiates (i.e., don't @@ -15149,7 +14013,7 @@ $as_echo "$as_me: error: cannot find inp `' by configure.' if test x"$ac_file" != x-; then configure_input="$ac_file. $configure_input" - { $as_echo "$as_me:$LINENO: creating $ac_file" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 $as_echo "$as_me: creating $ac_file" >&6;} fi # Neutralize special characters interpreted by sed in replacement strings. @@ -15162,9 +14026,7 @@ $as_echo "$as_me: creating $ac_file" >&6 case $ac_tag in *:-:* | *:-) cat >"$tmp/stdin" \ - || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 -$as_echo "$as_me: error: could not create $ac_file" >&2;} - { (exit 1); exit 1; }; } ;; + || as_fn_error "could not create $ac_file" "$LINENO" 5 ;; esac ;; esac @@ -15192,47 +14054,7 @@ $as_echo X"$ac_file" | q } s/.*/./; q'` - { as_dir="$ac_dir" - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 -$as_echo "$as_me: error: cannot create directory $as_dir" >&2;} - { (exit 1); exit 1; }; }; } + as_dir="$ac_dir"; as_fn_mkdir_p ac_builddir=. case "$ac_dir" in @@ -15289,7 +14111,6 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_wri # If the template does not know about datarootdir, expand it. # FIXME: This hack should be removed a few years after 2.60. ac_datarootdir_hack=; ac_datarootdir_seen= - ac_sed_dataroot=' /datarootdir/ { p @@ -15299,12 +14120,11 @@ ac_sed_dataroot=' /@docdir@/p /@infodir@/p /@localedir@/p -/@mandir@/p -' +/@mandir@/p' case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in *datarootdir*) ac_datarootdir_seen=yes;; *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) - { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 $as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 @@ -15314,7 +14134,7 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_writ s&@infodir@&$infodir&g s&@localedir@&$localedir&g s&@mandir@&$mandir&g - s&\\\${datarootdir}&$datarootdir&g' ;; + s&\\\${datarootdir}&$datarootdir&g' ;; esac _ACEOF @@ -15343,14 +14163,12 @@ s&@MKDIR_P@&$ac_MKDIR_P&;t t $ac_datarootdir_hack " eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ - || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 -$as_echo "$as_me: error: could not create $ac_file" >&2;} - { (exit 1); exit 1; }; } + || as_fn_error "could not create $ac_file" "$LINENO" 5 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && - { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined." >&5 $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined." >&2;} @@ -15360,9 +14178,7 @@ which seems to be undefined. Please mak -) cat "$tmp/out" && rm -f "$tmp/out";; *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; esac \ - || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 -$as_echo "$as_me: error: could not create $ac_file" >&2;} - { (exit 1); exit 1; }; } + || as_fn_error "could not create $ac_file" "$LINENO" 5 ;; :H) # @@ -15373,25 +14189,19 @@ $as_echo "$as_me: error: could not creat $as_echo "/* $configure_input */" \ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" } >"$tmp/config.h" \ - || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 -$as_echo "$as_me: error: could not create $ac_file" >&2;} - { (exit 1); exit 1; }; } + || as_fn_error "could not create $ac_file" "$LINENO" 5 if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then - { $as_echo "$as_me:$LINENO: $ac_file is unchanged" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 $as_echo "$as_me: $ac_file is unchanged" >&6;} else rm -f "$ac_file" mv "$tmp/config.h" "$ac_file" \ - || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 -$as_echo "$as_me: error: could not create $ac_file" >&2;} - { (exit 1); exit 1; }; } + || as_fn_error "could not create $ac_file" "$LINENO" 5 fi else $as_echo "/* $configure_input */" \ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \ - || { { $as_echo "$as_me:$LINENO: error: could not create -" >&5 -$as_echo "$as_me: error: could not create -" >&2;} - { (exit 1); exit 1; }; } + || as_fn_error "could not create -" "$LINENO" 5 fi # Compute "$ac_file"'s index in $config_headers. _am_arg="$ac_file" @@ -15429,7 +14239,7 @@ $as_echo X"$_am_arg" | s/.*/./; q'`/stamp-h$_am_stamp_count ;; - :C) { $as_echo "$as_me:$LINENO: executing $ac_file commands" >&5 + :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 $as_echo "$as_me: executing $ac_file commands" >&6;} ;; esac @@ -15524,47 +14334,7 @@ $as_echo X"$file" | q } s/.*/./; q'` - { as_dir=$dirpart/$fdir - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 -$as_echo "$as_me: error: cannot create directory $as_dir" >&2;} - { (exit 1); exit 1; }; }; } + as_dir=$dirpart/$fdir; as_fn_mkdir_p # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done @@ -16211,15 +14981,12 @@ _LT_EOF done # for ac_tag -{ (exit 0); exit 0; } +as_fn_exit 0 _ACEOF -chmod +x $CONFIG_STATUS ac_clean_files=$ac_clean_files_save test $ac_write_fail = 0 || - { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" >&5 -$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;} - { (exit 1); exit 1; }; } + as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5 # configure is writing to config.log, and then calls config.status. @@ -16240,10 +15007,10 @@ if test "$no_create" != yes; then exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. - $ac_cs_success || { (exit 1); exit 1; } + $ac_cs_success || as_fn_exit $? fi if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then - { $as_echo "$as_me:$LINENO: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} fi --- plymouth-0.8.2.orig/src/Makefile.in +++ plymouth-0.8.2/src/Makefile.in @@ -220,6 +220,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PANGO_CFLAGS = @PANGO_CFLAGS@ PANGO_LIBS = @PANGO_LIBS@ --- plymouth-0.8.2.orig/src/main.c +++ plymouth-0.8.2/src/main.c @@ -116,6 +116,7 @@ typedef struct const char *default_tty; int number_of_errors; + ply_list_t *pending_messages; } state_t; static ply_boot_splash_t *start_boot_splash (state_t *state, @@ -164,14 +165,34 @@ on_update (state_t *state, const char *status) { ply_trace ("updating status to '%s'", status); - ply_progress_status_update (state->progress, - status); + if (strncmp (status, "fsck:", 5)) + ply_progress_status_update (state->progress, + status); if (state->boot_splash != NULL) ply_boot_splash_update_status (state->boot_splash, status); } static void +flush_pending_messages (state_t *state) +{ + ply_list_node_t *node = ply_list_get_first_node (state->pending_messages); + while (node != NULL) + { + ply_list_node_t *next_node; + char *message = ply_list_node_get_data (node); + + ply_trace ("displaying queued message"); + + ply_boot_splash_display_message (state->boot_splash, message); + next_node = ply_list_get_next_node (state->pending_messages, node); + ply_list_remove_node (state->pending_messages, node); + free(message); + node = next_node; + } +} + +static void show_detailed_splash (state_t *state) { if (state->boot_splash != NULL) @@ -319,11 +340,15 @@ show_default_splash (state_t *state) ply_trace ("Could not start default splash screen," "showing text splash screen"); state->boot_splash = start_boot_splash (state, - PLYMOUTH_THEME_PATH "text/text.plymouth"); + PLYMOUTH_THEME_PATH "text.plymouth"); } if (state->boot_splash == NULL) - ply_error ("could not start boot splash: %m"); + { + if (errno != ENOENT) + ply_error ("could not start boot splash: %m"); + show_detailed_splash (state); + } } static void @@ -374,6 +399,8 @@ on_display_message (state_t *state ply_trace ("displaying message %s", message); if (state->boot_splash != NULL) ply_boot_splash_display_message (state->boot_splash, message); + else + ply_list_append_data (state->pending_messages, strdup(message)); } static void @@ -720,6 +747,7 @@ on_show_splash (state_t *state) show_detailed_splash (state); state->showing_details = true; } + flush_pending_messages (state); } static void @@ -1259,6 +1287,10 @@ add_display_and_keyboard_for_terminal (s state->terminal = ply_terminal_new (tty_name); + // urgh + if (!ply_terminal_open (state->terminal)) + return; + keyboard = ply_keyboard_new_for_terminal (state->terminal); display = ply_text_display_new (state->terminal); @@ -1674,6 +1706,7 @@ initialize_environment (state_t *state) state->entry_buffer = ply_buffer_new(); state->pixel_displays = ply_list_new (); state->text_displays = ply_list_new (); + state->pending_messages = ply_list_new (); state->keyboard = NULL; if (!state->default_tty) @@ -1904,12 +1937,7 @@ main (int argc, { state.should_be_attached = attach_to_session; if (!attach_to_running_session (&state)) - { - ply_error ("could not create session: %m"); - if (! no_daemon) - ply_detach_daemon (daemon_handle, EX_UNAVAILABLE); - return EX_UNAVAILABLE; - } + ply_trace ("could not create session: %m"); } state.boot_server = start_boot_server (&state); --- plymouth-0.8.2.orig/src/viewer/Makefile.in +++ plymouth-0.8.2/src/viewer/Makefile.in @@ -215,6 +215,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PANGO_CFLAGS = @PANGO_CFLAGS@ PANGO_LIBS = @PANGO_LIBS@ --- plymouth-0.8.2.orig/src/client/ply-boot-client.h +++ plymouth-0.8.2/src/client/ply-boot-client.h @@ -129,6 +129,7 @@ void ply_boot_client_ask_daemon_has_acti ply_boot_client_response_handler_t handler, ply_boot_client_response_handler_t failed_handler, void *user_data); +void ply_boot_client_flush (ply_boot_client_t *client); void ply_boot_client_disconnect (ply_boot_client_t *client); void ply_boot_client_attach_to_event_loop (ply_boot_client_t *client, ply_event_loop_t *loop); --- plymouth-0.8.2.orig/src/client/Makefile.in +++ plymouth-0.8.2/src/client/Makefile.in @@ -228,6 +228,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PANGO_CFLAGS = @PANGO_CFLAGS@ PANGO_LIBS = @PANGO_LIBS@ --- plymouth-0.8.2.orig/src/client/ply-boot-client.c +++ plymouth-0.8.2/src/client/ply-boot-client.c @@ -257,15 +257,32 @@ ply_boot_client_process_incoming_replies return; } - request_node = ply_list_get_first_node (client->requests_waiting_for_replies); - assert (request_node != NULL); - - request = (ply_boot_client_request_t *) ply_list_node_get_data (request_node); - assert (request != NULL); - if (!ply_read (client->socket_fd, byte, sizeof (uint8_t))) goto out; + for (request_node = ply_list_get_first_node (client->requests_waiting_for_replies); + request_node; request_node = ply_list_get_next_node (client->requests_waiting_for_replies, request_node)) + { + assert (request_node != NULL); + request = (ply_boot_client_request_t *) ply_list_node_get_data (request_node); + assert (request != NULL); + + if (! strcmp (request->command, PLY_BOOT_PROTOCOL_REQUEST_TYPE_PASSWORD) + || ! strcmp (request->command, PLY_BOOT_PROTOCOL_REQUEST_TYPE_QUESTION) + || ! strcmp (request->command, PLY_BOOT_PROTOCOL_REQUEST_TYPE_KEYSTROKE)) + { + if (! memcmp (byte, PLY_BOOT_PROTOCOL_RESPONSE_TYPE_ANSWER, sizeof (uint8_t)) + || ! memcmp (byte, PLY_BOOT_PROTOCOL_RESPONSE_TYPE_NO_ANSWER, sizeof (uint8_t))) + break; + } + else + { + if (memcmp (byte, PLY_BOOT_PROTOCOL_RESPONSE_TYPE_ANSWER, sizeof (uint8_t)) + && memcmp (byte, PLY_BOOT_PROTOCOL_RESPONSE_TYPE_NO_ANSWER, sizeof (uint8_t))) + break; + } + } + if (memcmp (byte, PLY_BOOT_PROTOCOL_RESPONSE_TYPE_ACK, sizeof (uint8_t)) == 0) request->handler (request->user_data, client); else if (memcmp (byte, PLY_BOOT_PROTOCOL_RESPONSE_TYPE_ANSWER, sizeof (uint8_t)) == 0) @@ -743,6 +760,17 @@ ply_boot_client_tell_daemon_about_error } void +ply_boot_client_flush (ply_boot_client_t *client) +{ + assert (client != NULL); + + while (ply_list_get_length (client->requests_to_send) > 0) + { + ply_event_loop_process_pending_events (client->loop); + } +} + +void ply_boot_client_disconnect (ply_boot_client_t *client) { assert (client != NULL); --- plymouth-0.8.2.orig/src/client/tests/Makefile.in +++ plymouth-0.8.2/src/client/tests/Makefile.in @@ -121,6 +121,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PANGO_CFLAGS = @PANGO_CFLAGS@ PANGO_LIBS = @PANGO_LIBS@ --- plymouth-0.8.2.orig/src/plugins/Makefile.in +++ plymouth-0.8.2/src/plugins/Makefile.in @@ -154,6 +154,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PANGO_CFLAGS = @PANGO_CFLAGS@ PANGO_LIBS = @PANGO_LIBS@ --- plymouth-0.8.2.orig/src/plugins/splash/Makefile.am +++ plymouth-0.8.2/src/plugins/splash/Makefile.am @@ -1,2 +1,2 @@ -SUBDIRS = throbgress fade-throbber text details space-flares two-step script +SUBDIRS = throbgress fade-throbber text details space-flares two-step script ubuntu-text MAINTAINERCLEANFILES = Makefile.in --- plymouth-0.8.2.orig/src/plugins/splash/Makefile.in +++ plymouth-0.8.2/src/plugins/splash/Makefile.in @@ -154,6 +154,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PANGO_CFLAGS = @PANGO_CFLAGS@ PANGO_LIBS = @PANGO_LIBS@ @@ -233,7 +234,7 @@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ -SUBDIRS = throbgress fade-throbber text details space-flares two-step script +SUBDIRS = throbgress fade-throbber text details space-flares two-step script ubuntu-text MAINTAINERCLEANFILES = Makefile.in all: all-recursive --- plymouth-0.8.2.orig/src/plugins/splash/two-step/Makefile.in +++ plymouth-0.8.2/src/plugins/splash/two-step/Makefile.in @@ -173,6 +173,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PANGO_CFLAGS = @PANGO_CFLAGS@ PANGO_LIBS = @PANGO_LIBS@ --- plymouth-0.8.2.orig/src/plugins/splash/text/plugin.c +++ plymouth-0.8.2/src/plugins/splash/text/plugin.c @@ -485,7 +485,10 @@ add_text_display (ply_boot_splash_plugin terminal = ply_text_display_get_terminal (view->display); if (ply_terminal_open (terminal)) - ply_terminal_activate_vt (terminal); + { + ply_terminal_set_mode (terminal, PLY_TERMINAL_MODE_TEXT); + ply_terminal_activate_vt (terminal); + } ply_text_display_set_draw_handler (view->display, (ply_text_display_draw_handler_t) --- plymouth-0.8.2.orig/src/plugins/splash/text/Makefile.in +++ plymouth-0.8.2/src/plugins/splash/text/Makefile.in @@ -171,6 +171,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PANGO_CFLAGS = @PANGO_CFLAGS@ PANGO_LIBS = @PANGO_LIBS@ --- /dev/null +++ plymouth-0.8.2/src/plugins/splash/ubuntu-text/Makefile.am @@ -0,0 +1,23 @@ +INCLUDES = -I$(top_srcdir) \ + -I$(srcdir)/../../../libply \ + -I$(srcdir)/../../../libply-splash-core \ + -I$(srcdir)/../../.. \ + -I$(srcdir)/../.. \ + -I$(srcdir)/.. \ + -I$(srcdir) + +plugindir = $(libdir)/plymouth +plugin_LTLIBRARIES = ubuntu-text.la + +ubuntu_text_la_CFLAGS = $(PLYMOUTH_CFLAGS) \ + -DPLYMOUTH_BACKGROUND_COLOR=$(background_color) \ + -DPLYMOUTH_BACKGROUND_END_COLOR=$(background_end_color) \ + -DPLYMOUTH_BACKGROUND_START_COLOR=$(background_start_color) + +ubuntu_text_la_LDFLAGS = -module -avoid-version -export-dynamic +ubuntu_text_la_LIBADD = $(PLYMOUTH_LIBS) \ + ../../../libply/libply.la \ + ../../../libply-splash-core/libply-splash-core.la +ubuntu_text_la_SOURCES = $(srcdir)/plugin.c + +MAINTAINERCLEANFILES = Makefile.in --- /dev/null +++ plymouth-0.8.2/src/plugins/splash/ubuntu-text/plugin.c @@ -0,0 +1,795 @@ +/* ubuntu-text.c - boot splash plugin + * + * Copyright (C) 2010 Canonical Ltd. + * Copyright (C) 2008 Red Hat, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA + * 02111-1307, USA. + * + * Written by: Scott James Remnant + * Adam Jackson + * Ray Strode + */ +#include "config.h" + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "ply-trigger.h" +#include "ply-boot-splash-plugin.h" +#include "ply-buffer.h" +#include "ply-event-loop.h" +#include "ply-key-file.h" +#include "ply-list.h" +#include "ply-logger.h" +#include "ply-text-display.h" +#include "ply-text-progress-bar.h" +#include "ply-utils.h" + +#include + +#define CLEAR_LINE_SEQUENCE "\033[2K\r\n" +#define BACKSPACE "\b\033[0K" + +typedef enum { + PLY_BOOT_SPLASH_DISPLAY_NORMAL, + PLY_BOOT_SPLASH_DISPLAY_QUESTION_ENTRY, + PLY_BOOT_SPLASH_DISPLAY_PASSWORD_ENTRY +} ply_boot_splash_display_type_t; + +struct _ply_boot_splash_plugin +{ + ply_event_loop_t *loop; + ply_boot_splash_mode_t mode; + + ply_list_t *views; + + ply_boot_splash_display_type_t state; + + char *message; + + uint32_t is_animating : 1; +}; + +typedef struct +{ + ply_boot_splash_plugin_t *plugin; + ply_text_display_t *display; + +} view_t; + +static void hide_splash_screen (ply_boot_splash_plugin_t *plugin, + ply_event_loop_t *loop); + +static view_t * +view_new (ply_boot_splash_plugin_t *plugin, + ply_text_display_t *display) +{ + view_t *view; + + view = calloc (1, sizeof (view_t)); + view->plugin = plugin; + view->display = display; + + return view; +} + +static void +view_free (view_t *view) +{ + free (view); +} + +static void +view_show_message (view_t *view) +{ + ply_boot_splash_plugin_t *plugin; + int display_width, display_height, y; + ply_terminal_color_t color; + char *message; + + plugin = view->plugin; + + display_width = ply_text_display_get_number_of_columns (view->display); + display_height = ply_text_display_get_number_of_rows (view->display); + + if (!strncmp (plugin->message, "keys:", 5)) + { + message = plugin->message + 5; + color = PLY_TERMINAL_COLOR_WHITE; + y = display_height - 4; + } + else + { + message = plugin->message; + color = PLY_TERMINAL_COLOR_BLUE; + y = display_height / 2 + 7; + } + + ply_text_display_set_cursor_position (view->display, 0, y); + ply_text_display_clear_line (view->display); + ply_text_display_set_cursor_position (view->display, + (display_width - + strlen (message)) / 2, + y); + + ply_text_display_set_foreground_color (view->display, color); + ply_text_display_write (view->display, "%s", message); +} + +static void +view_show_prompt (view_t *view, + const char *prompt, + const char *entered_text) +{ + ply_boot_splash_plugin_t *plugin; + int display_width, display_height; + int i; + + plugin = view->plugin; + + display_width = ply_text_display_get_number_of_columns (view->display); + display_height = ply_text_display_get_number_of_rows (view->display); + + ply_text_display_set_cursor_position (view->display, 0, + display_height / 2 + 8); + ply_text_display_clear_line (view->display); + ply_text_display_set_cursor_position (view->display, + display_width / 2 - (strlen (prompt)), + display_height / 2 + 8); + + ply_text_display_write (view->display, "%s:%s", prompt, entered_text); + + ply_text_display_show_cursor (view->display); +} + +static void +view_start_animation (view_t *view) +{ + ply_boot_splash_plugin_t *plugin; + ply_terminal_t *terminal; + + assert (view != NULL); + + plugin = view->plugin; + + terminal = ply_text_display_get_terminal (view->display); + + ply_terminal_set_color_hex_value (terminal, + PLY_TERMINAL_COLOR_BLACK, + 0x2c001e); + ply_terminal_set_color_hex_value (terminal, + PLY_TERMINAL_COLOR_WHITE, + 0xffffff); + ply_terminal_set_color_hex_value (terminal, + PLY_TERMINAL_COLOR_BROWN, + 0xff4012); + ply_terminal_set_color_hex_value (terminal, + PLY_TERMINAL_COLOR_BLUE, + 0x988592); + + ply_text_display_set_background_color (view->display, + PLY_TERMINAL_COLOR_BLACK); + ply_text_display_clear_screen (view->display); + ply_text_display_hide_cursor (view->display); +} + +static void +view_redraw (view_t *view) +{ + unsigned long screen_width, screen_height; + + screen_width = ply_text_display_get_number_of_columns (view->display); + screen_height = ply_text_display_get_number_of_rows (view->display); + + ply_text_display_draw_area (view->display, 0, 0, + screen_width, screen_height); +} + +static void +redraw_views (ply_boot_splash_plugin_t *plugin) +{ + ply_list_node_t *node; + + node = ply_list_get_first_node (plugin->views); + while (node != NULL) + { + ply_list_node_t *next_node; + view_t *view; + + view = ply_list_node_get_data (node); + next_node = ply_list_get_next_node (plugin->views, node); + + view_redraw (view); + + node = next_node; + } +} + +static void +view_hide (view_t *view) +{ + if (view->display != NULL) + { + ply_terminal_t *terminal; + + terminal = ply_text_display_get_terminal (view->display); + + ply_text_display_set_background_color (view->display, PLY_TERMINAL_COLOR_DEFAULT); + ply_text_display_clear_screen (view->display); + ply_text_display_show_cursor (view->display); + + ply_terminal_reset_colors (terminal); + } +} + +static void +hide_views (ply_boot_splash_plugin_t *plugin) +{ + ply_list_node_t *node; + + node = ply_list_get_first_node (plugin->views); + while (node != NULL) + { + ply_list_node_t *next_node; + view_t *view; + + view = ply_list_node_get_data (node); + next_node = ply_list_get_next_node (plugin->views, node); + + view_hide (view); + + node = next_node; + } +} + +static void +pause_views (ply_boot_splash_plugin_t *plugin) +{ + ply_list_node_t *node; + + node = ply_list_get_first_node (plugin->views); + while (node != NULL) + { + ply_list_node_t *next_node; + view_t *view; + + view = ply_list_node_get_data (node); + next_node = ply_list_get_next_node (plugin->views, node); + + ply_text_display_pause_updates (view->display); + + node = next_node; + } +} + +static void +unpause_views (ply_boot_splash_plugin_t *plugin) +{ + ply_list_node_t *node; + + node = ply_list_get_first_node (plugin->views); + while (node != NULL) + { + ply_list_node_t *next_node; + view_t *view; + + view = ply_list_node_get_data (node); + next_node = ply_list_get_next_node (plugin->views, node); + + ply_text_display_unpause_updates (view->display); + + node = next_node; + } +} + +static ply_boot_splash_plugin_t * +create_plugin (ply_key_file_t *key_file) +{ + ply_boot_splash_plugin_t *plugin; + + ply_trace ("creating plugin"); + + plugin = calloc (1, sizeof (ply_boot_splash_plugin_t)); + plugin->message = NULL; + + plugin->views = ply_list_new (); + + return plugin; +} + +static void +detach_from_event_loop (ply_boot_splash_plugin_t *plugin) +{ + plugin->loop = NULL; + + ply_trace ("detaching from event loop"); +} + +static void +free_views (ply_boot_splash_plugin_t *plugin) +{ + ply_list_node_t *node; + + node = ply_list_get_first_node (plugin->views); + + while (node != NULL) + { + ply_list_node_t *next_node; + view_t *view; + + view = ply_list_node_get_data (node); + next_node = ply_list_get_next_node (plugin->views, node); + + view_free (view); + ply_list_remove_node (plugin->views, node); + + node = next_node; + } + + ply_list_free (plugin->views); + plugin->views = NULL; +} + +static void +destroy_plugin (ply_boot_splash_plugin_t *plugin) +{ + ply_trace ("destroying plugin"); + + if (plugin == NULL) + return; + + /* It doesn't ever make sense to keep this plugin on screen + * after exit + */ + hide_splash_screen (plugin, plugin->loop); + + free_views (plugin); + if (plugin->message != NULL) + free (plugin->message); + + free (plugin); +} + +static void +show_message (ply_boot_splash_plugin_t *plugin) +{ + ply_list_node_t *node; + + node = ply_list_get_first_node (plugin->views); + while (node != NULL) + { + ply_list_node_t *next_node; + view_t *view; + + view = ply_list_node_get_data (node); + next_node = ply_list_get_next_node (plugin->views, node); + + view_show_message (view); + + node = next_node; + } +} + +static void +animate_frame (ply_boot_splash_plugin_t *plugin, + int frame) +{ + ply_list_node_t *node; + + node = ply_list_get_first_node (plugin->views); + while (node != NULL) + { + ply_list_node_t *next_node; + view_t *view; + int display_width, display_height; + + view = ply_list_node_get_data (node); + next_node = ply_list_get_next_node (plugin->views, node); + + display_width = ply_text_display_get_number_of_columns (view->display); + display_height = ply_text_display_get_number_of_rows (view->display); + + ply_text_display_set_cursor_position (view->display, + (display_width - 12) / 2, + display_height / 2); + + ply_text_display_set_background_color (view->display, PLY_TERMINAL_COLOR_BLACK); + ply_text_display_set_foreground_color (view->display, PLY_TERMINAL_COLOR_WHITE); + ply_text_display_write (view->display, "Ubuntu 10.04"); + + ply_text_display_set_cursor_position (view->display, + (display_width - 10) / 2, + (display_height / 2) + 2); + + if ((frame < 1) || (frame > 4)) + ply_text_display_set_foreground_color (view->display, PLY_TERMINAL_COLOR_WHITE); + else + ply_text_display_set_foreground_color (view->display, PLY_TERMINAL_COLOR_BROWN); + ply_text_display_write (view->display, ". "); + + if ((frame < 2) || (frame > 5)) + ply_text_display_set_foreground_color (view->display, PLY_TERMINAL_COLOR_WHITE); + else + ply_text_display_set_foreground_color (view->display, PLY_TERMINAL_COLOR_BROWN); + ply_text_display_write (view->display, ". "); + + if ((frame < 3) || (frame > 6)) + ply_text_display_set_foreground_color (view->display, PLY_TERMINAL_COLOR_WHITE); + else + ply_text_display_set_foreground_color (view->display, PLY_TERMINAL_COLOR_BROWN); + ply_text_display_write (view->display, ". "); + + if (frame < 4) + ply_text_display_set_foreground_color (view->display, PLY_TERMINAL_COLOR_WHITE); + else + ply_text_display_set_foreground_color (view->display, PLY_TERMINAL_COLOR_BROWN); + ply_text_display_write (view->display, "."); + + node = next_node; + } +} + +static void +on_timeout (ply_boot_splash_plugin_t *plugin) +{ + static int frame = 0; + + frame += 1; + frame %= 8; + + animate_frame (plugin, frame); + + ply_event_loop_watch_for_timeout (plugin->loop, 1.0, + (ply_event_loop_timeout_handler_t) + on_timeout, plugin); +} + +static void +start_animation (ply_boot_splash_plugin_t *plugin) +{ + ply_list_node_t *node; + + assert (plugin != NULL); + assert (plugin->loop != NULL); + + redraw_views (plugin); + + if (plugin->message != NULL) + show_message (plugin); + + if (plugin->is_animating) + return; + + node = ply_list_get_first_node (plugin->views); + while (node != NULL) + { + ply_list_node_t *next_node; + view_t *view; + + view = ply_list_node_get_data (node); + next_node = ply_list_get_next_node (plugin->views, node); + + view_start_animation (view); + + node = next_node; + } + + plugin->is_animating = true; + + animate_frame (plugin, 0); + ply_event_loop_watch_for_timeout (plugin->loop, 1.0, + (ply_event_loop_timeout_handler_t) + on_timeout, plugin); +} + +static void +stop_animation (ply_boot_splash_plugin_t *plugin) +{ + ply_list_node_t *node; + + assert (plugin != NULL); + assert (plugin->loop != NULL); + + if (!plugin->is_animating) + return; + + plugin->is_animating = false; + + node = ply_list_get_first_node (plugin->views); + while (node != NULL) + { + ply_list_node_t *next_node; + view_t *view; + + view = ply_list_node_get_data (node); + next_node = ply_list_get_next_node (plugin->views, node); + + node = next_node; + } + + ply_event_loop_stop_watching_for_timeout (plugin->loop, + (ply_event_loop_timeout_handler_t) + on_timeout, plugin); + + redraw_views (plugin); +} + +static void +on_draw (view_t *view, + ply_terminal_t *terminal, + int x, + int y, + int width, + int height) +{ +} + +static void +add_text_display (ply_boot_splash_plugin_t *plugin, + ply_text_display_t *display) +{ + view_t *view; + ply_terminal_t *terminal; + + view = view_new (plugin, display); + + terminal = ply_text_display_get_terminal (view->display); + if (ply_terminal_open (terminal)) + { + ply_terminal_set_mode (terminal, PLY_TERMINAL_MODE_TEXT); + ply_terminal_activate_vt (terminal); + } + + ply_text_display_set_draw_handler (view->display, + (ply_text_display_draw_handler_t) + on_draw, view); + + ply_list_append_data (plugin->views, view); +} + +static void +remove_text_display (ply_boot_splash_plugin_t *plugin, + ply_text_display_t *display) +{ + ply_list_node_t *node; + + node = ply_list_get_first_node (plugin->views); + while (node != NULL) + { + view_t *view; + ply_list_node_t *next_node; + + view = ply_list_node_get_data (node); + next_node = ply_list_get_next_node (plugin->views, node); + + if (view->display == display) + { + ply_text_display_set_draw_handler (view->display, + NULL, NULL); + view_free (view); + ply_list_remove_node (plugin->views, node); + return; + } + + node = next_node; + } +} + +static bool +show_splash_screen (ply_boot_splash_plugin_t *plugin, + ply_event_loop_t *loop, + ply_buffer_t *boot_buffer, + ply_boot_splash_mode_t mode) +{ + assert (plugin != NULL); + + plugin->loop = loop; + plugin->mode = mode; + ply_event_loop_watch_for_exit (loop, (ply_event_loop_exit_handler_t) + detach_from_event_loop, + plugin); + + ply_show_new_kernel_messages (false); + start_animation (plugin); + + return true; +} + +static void +update_status (ply_boot_splash_plugin_t *plugin, + const char *status) +{ + assert (plugin != NULL); + + ply_trace ("status update"); +} + +static void +hide_splash_screen (ply_boot_splash_plugin_t *plugin, + ply_event_loop_t *loop) +{ + assert (plugin != NULL); + + ply_trace ("hiding splash screen"); + + if (plugin->loop != NULL) + { + stop_animation (plugin); + + ply_event_loop_stop_watching_for_exit (plugin->loop, + (ply_event_loop_exit_handler_t) + detach_from_event_loop, + plugin); + detach_from_event_loop (plugin); + } + + hide_views (plugin); + ply_show_new_kernel_messages (true); +} + +static void +display_normal (ply_boot_splash_plugin_t *plugin) +{ + pause_views (plugin); + if (plugin->state != PLY_BOOT_SPLASH_DISPLAY_NORMAL) + { + plugin->state = PLY_BOOT_SPLASH_DISPLAY_NORMAL; + start_animation (plugin); + redraw_views (plugin); + } + unpause_views (plugin); +} + +static void +display_message (ply_boot_splash_plugin_t *plugin, + const char *message) +{ + if (plugin->message != NULL) + free (plugin->message); + + plugin->message = strdup (message); + start_animation (plugin); +} + +static void +show_password_prompt (ply_boot_splash_plugin_t *plugin, + const char *prompt, + int bullets) +{ + ply_list_node_t *node; + int i; + char *entered_text; + + entered_text = calloc (bullets + 1, sizeof (char)); + + for (i = 0; i < bullets; i++) + entered_text[i] = '*'; + + node = ply_list_get_first_node (plugin->views); + while (node != NULL) + { + ply_list_node_t *next_node; + view_t *view; + + view = ply_list_node_get_data (node); + next_node = ply_list_get_next_node (plugin->views, node); + + view_show_prompt (view, prompt, entered_text); + + node = next_node; + } + free (entered_text); +} + +static void +show_prompt (ply_boot_splash_plugin_t *plugin, + const char *prompt, + const char *text) +{ + ply_list_node_t *node; + + node = ply_list_get_first_node (plugin->views); + while (node != NULL) + { + ply_list_node_t *next_node; + view_t *view; + + view = ply_list_node_get_data (node); + next_node = ply_list_get_next_node (plugin->views, node); + + view_show_prompt (view, prompt, text); + + node = next_node; + } +} + +static void +display_password (ply_boot_splash_plugin_t *plugin, + const char *prompt, + int bullets) +{ + pause_views (plugin); + if (plugin->state == PLY_BOOT_SPLASH_DISPLAY_NORMAL) + stop_animation (plugin); + + plugin->state = PLY_BOOT_SPLASH_DISPLAY_PASSWORD_ENTRY; + + if (!prompt) + prompt = "Password"; + + show_password_prompt (plugin, prompt, bullets); + + unpause_views (plugin); +} + +static void +display_question (ply_boot_splash_plugin_t *plugin, + const char *prompt, + const char *entry_text) +{ + pause_views (plugin); + if (plugin->state == PLY_BOOT_SPLASH_DISPLAY_NORMAL) + stop_animation (plugin); + + plugin->state = PLY_BOOT_SPLASH_DISPLAY_PASSWORD_ENTRY; + + if (!prompt) + prompt = "Password"; + + show_prompt (plugin, prompt, entry_text); + + unpause_views (plugin); +} + + +ply_boot_splash_plugin_interface_t * +ply_boot_splash_plugin_get_interface (void) +{ + static ply_boot_splash_plugin_interface_t plugin_interface = + { + .create_plugin = create_plugin, + .destroy_plugin = destroy_plugin, + .add_text_display = add_text_display, + .remove_text_display = remove_text_display, + .show_splash_screen = show_splash_screen, + .update_status = update_status, + .hide_splash_screen = hide_splash_screen, + .display_normal = display_normal, + .display_message = display_message, + .display_password = display_password, + .display_question = display_question, + }; + + return &plugin_interface; +} + +/* vim: set ts=4 sw=4 expandtab autoindent cindent cino={.5s,(0: */ --- /dev/null +++ plymouth-0.8.2/src/plugins/splash/ubuntu-text/Makefile.in @@ -0,0 +1,597 @@ +# Makefile.in generated by automake 1.11.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +subdir = src/plugins/splash/ubuntu-text +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ + $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__installdirs = "$(DESTDIR)$(plugindir)" +LTLIBRARIES = $(plugin_LTLIBRARIES) +am__DEPENDENCIES_1 = +ubuntu_text_la_DEPENDENCIES = $(am__DEPENDENCIES_1) \ + ../../../libply/libply.la \ + ../../../libply-splash-core/libply-splash-core.la +am_ubuntu_text_la_OBJECTS = ubuntu_text_la-plugin.lo +ubuntu_text_la_OBJECTS = $(am_ubuntu_text_la_OBJECTS) +AM_V_lt = $(am__v_lt_$(V)) +am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY)) +am__v_lt_0 = --silent +ubuntu_text_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \ + $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \ + $(ubuntu_text_la_CFLAGS) $(CFLAGS) $(ubuntu_text_la_LDFLAGS) \ + $(LDFLAGS) -o $@ +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) +depcomp = $(SHELL) $(top_srcdir)/build-tools/depcomp +am__depfiles_maybe = depfiles +am__mv = mv -f +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CFLAGS) $(CFLAGS) +AM_V_CC = $(am__v_CC_$(V)) +am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY)) +am__v_CC_0 = @echo " CC " $@; +AM_V_at = $(am__v_at_$(V)) +am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) +am__v_at_0 = @ +CCLD = $(CC) +LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_CCLD = $(am__v_CCLD_$(V)) +am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY)) +am__v_CCLD_0 = @echo " CCLD " $@; +AM_V_GEN = $(am__v_GEN_$(V)) +am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) +am__v_GEN_0 = @echo " GEN " $@; +SOURCES = $(ubuntu_text_la_SOURCES) +DIST_SOURCES = $(ubuntu_text_la_SOURCES) +ETAGS = etags +CTAGS = ctags +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DRM_CFLAGS = @DRM_CFLAGS@ +DRM_LIBS = @DRM_LIBS@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GREP = @GREP@ +GTK_CFLAGS = @GTK_CFLAGS@ +GTK_LIBS = @GTK_LIBS@ +IMAGE_CFLAGS = @IMAGE_CFLAGS@ +IMAGE_LIBS = @IMAGE_LIBS@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +LT_AGE = @LT_AGE@ +LT_CURRENT = @LT_CURRENT@ +LT_REVISION = @LT_REVISION@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MKDIR_P = @MKDIR_P@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PANGO_CFLAGS = @PANGO_CFLAGS@ +PANGO_LIBS = @PANGO_LIBS@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PKG_CONFIG = @PKG_CONFIG@ +PLYMOUTH_CFLAGS = @PLYMOUTH_CFLAGS@ +PLYMOUTH_CONF_DIR = @PLYMOUTH_CONF_DIR@ +PLYMOUTH_DATADIR = @PLYMOUTH_DATADIR@ +PLYMOUTH_LIBDIR = @PLYMOUTH_LIBDIR@ +PLYMOUTH_LIBEXECDIR = @PLYMOUTH_LIBEXECDIR@ +PLYMOUTH_LIBS = @PLYMOUTH_LIBS@ +PLYMOUTH_PLUGIN_PATH = @PLYMOUTH_PLUGIN_PATH@ +PLYMOUTH_POLICY_DIR = @PLYMOUTH_POLICY_DIR@ +PLYMOUTH_THEME_PATH = @PLYMOUTH_THEME_PATH@ +RANLIB = @RANLIB@ +RELEASE_FILE = @RELEASE_FILE@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +VERSION = @VERSION@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +background_color = @background_color@ +background_end_color = @background_end_color@ +background_start_color = @background_start_color@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +logofile = @logofile@ +lt_ECHO = @lt_ECHO@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +plymouthclientdir = @plymouthclientdir@ +plymouthdaemondir = @plymouthdaemondir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +INCLUDES = -I$(top_srcdir) \ + -I$(srcdir)/../../../libply \ + -I$(srcdir)/../../../libply-splash-core \ + -I$(srcdir)/../../.. \ + -I$(srcdir)/../.. \ + -I$(srcdir)/.. \ + -I$(srcdir) + +plugindir = $(libdir)/plymouth +plugin_LTLIBRARIES = ubuntu-text.la +ubuntu_text_la_CFLAGS = $(PLYMOUTH_CFLAGS) \ + -DPLYMOUTH_BACKGROUND_COLOR=$(background_color) \ + -DPLYMOUTH_BACKGROUND_END_COLOR=$(background_end_color) \ + -DPLYMOUTH_BACKGROUND_START_COLOR=$(background_start_color) + +ubuntu_text_la_LDFLAGS = -module -avoid-version -export-dynamic +ubuntu_text_la_LIBADD = $(PLYMOUTH_LIBS) \ + ../../../libply/libply.la \ + ../../../libply-splash-core/libply-splash-core.la + +ubuntu_text_la_SOURCES = $(srcdir)/plugin.c +MAINTAINERCLEANFILES = Makefile.in +all: all-am + +.SUFFIXES: +.SUFFIXES: .c .lo .o .obj +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/plugins/splash/ubuntu-text/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu src/plugins/splash/ubuntu-text/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): +install-pluginLTLIBRARIES: $(plugin_LTLIBRARIES) + @$(NORMAL_INSTALL) + test -z "$(plugindir)" || $(MKDIR_P) "$(DESTDIR)$(plugindir)" + @list='$(plugin_LTLIBRARIES)'; test -n "$(plugindir)" || list=; \ + list2=; for p in $$list; do \ + if test -f $$p; then \ + list2="$$list2 $$p"; \ + else :; fi; \ + done; \ + test -z "$$list2" || { \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(plugindir)'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(plugindir)"; \ + } + +uninstall-pluginLTLIBRARIES: + @$(NORMAL_UNINSTALL) + @list='$(plugin_LTLIBRARIES)'; test -n "$(plugindir)" || list=; \ + for p in $$list; do \ + $(am__strip_dir) \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(plugindir)/$$f'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(plugindir)/$$f"; \ + done + +clean-pluginLTLIBRARIES: + -test -z "$(plugin_LTLIBRARIES)" || rm -f $(plugin_LTLIBRARIES) + @list='$(plugin_LTLIBRARIES)'; for p in $$list; do \ + dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ + test "$$dir" != "$$p" || dir=.; \ + echo "rm -f \"$${dir}/so_locations\""; \ + rm -f "$${dir}/so_locations"; \ + done +ubuntu-text.la: $(ubuntu_text_la_OBJECTS) $(ubuntu_text_la_DEPENDENCIES) + $(AM_V_CCLD)$(ubuntu_text_la_LINK) -rpath $(plugindir) $(ubuntu_text_la_OBJECTS) $(ubuntu_text_la_LIBADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ubuntu_text_la-plugin.Plo@am__quote@ + +.c.o: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c $< + +.c.obj: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + +.c.lo: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< + +ubuntu_text_la-plugin.lo: $(srcdir)/plugin.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ubuntu_text_la_CFLAGS) $(CFLAGS) -MT ubuntu_text_la-plugin.lo -MD -MP -MF $(DEPDIR)/ubuntu_text_la-plugin.Tpo -c -o ubuntu_text_la-plugin.lo `test -f '$(srcdir)/plugin.c' || echo '$(srcdir)/'`$(srcdir)/plugin.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/ubuntu_text_la-plugin.Tpo $(DEPDIR)/ubuntu_text_la-plugin.Plo +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$(srcdir)/plugin.c' object='ubuntu_text_la-plugin.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ubuntu_text_la_CFLAGS) $(CFLAGS) -c -o ubuntu_text_la-plugin.lo `test -f '$(srcdir)/plugin.c' || echo '$(srcdir)/'`$(srcdir)/plugin.c + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + set x; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: CTAGS +CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(LTLIBRARIES) +installdirs: + for dir in "$(DESTDIR)$(plugindir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." + -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) +clean: clean-am + +clean-am: clean-generic clean-libtool clean-pluginLTLIBRARIES \ + mostlyclean-am + +distclean: distclean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: install-pluginLTLIBRARIES + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-pluginLTLIBRARIES + +.MAKE: install-am install-strip + +.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ + clean-libtool clean-pluginLTLIBRARIES ctags distclean \ + distclean-compile distclean-generic distclean-libtool \ + distclean-tags distdir dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-pluginLTLIBRARIES \ + install-ps install-ps-am install-strip installcheck \ + installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-compile \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ + tags uninstall uninstall-am uninstall-pluginLTLIBRARIES + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: --- plymouth-0.8.2.orig/src/plugins/splash/details/plugin.c +++ plymouth-0.8.2/src/plugins/splash/details/plugin.c @@ -73,6 +73,7 @@ struct _ply_boot_splash_plugin ply_boot_splash_mode_t mode; ply_list_t *views; ply_boot_splash_display_type_t state; + ply_list_t *messages; }; @@ -120,6 +121,31 @@ free_views (ply_boot_splash_plugin_t *pl plugin->views = NULL; } +static void +free_messages (ply_boot_splash_plugin_t *plugin) +{ + ply_list_node_t *node; + + node = ply_list_get_first_node (plugin->messages); + + while (node != NULL) + { + ply_list_node_t *next_node; + char *message; + + message = ply_list_node_get_data (node); + next_node = ply_list_get_next_node (plugin->messages, node); + + free (message); + ply_list_remove_node (plugin->messages, node); + + node = next_node; + } + + ply_list_free (plugin->messages); + plugin->messages = NULL; +} + static ply_boot_splash_plugin_t * create_plugin (ply_key_file_t *key_file) { @@ -130,6 +156,7 @@ create_plugin (ply_key_file_t *key_file) plugin = calloc (1, sizeof (ply_boot_splash_plugin_t)); plugin->views = ply_list_new (); plugin->state = PLY_BOOT_SPLASH_DISPLAY_NORMAL; + plugin->messages = ply_list_new (); return plugin; } @@ -141,6 +168,7 @@ destroy_plugin (ply_boot_splash_plugin_t if (plugin == NULL) return; + free_messages (plugin); free_views (plugin); free (plugin); @@ -203,7 +231,10 @@ add_text_display (ply_boot_splash_plugin terminal = ply_text_display_get_terminal (view->display); if (ply_terminal_open (terminal)) - ply_terminal_activate_vt (terminal); + { + ply_terminal_set_mode (terminal, PLY_TERMINAL_MODE_TEXT); + ply_terminal_activate_vt (terminal); + } ply_list_append_data (plugin->views, view); } @@ -294,10 +325,28 @@ hide_splash_screen (ply_boot_splash_plug static void display_normal (ply_boot_splash_plugin_t *plugin) { + ply_list_node_t *node; + if (plugin->state != PLY_BOOT_SPLASH_DISPLAY_NORMAL) write_on_views (plugin, "\r\n", strlen ("\r\n")); plugin->state = PLY_BOOT_SPLASH_DISPLAY_NORMAL; + + node = ply_list_get_first_node (plugin->messages); + while (node != NULL) + { + const char *message; + ply_list_node_t *next_node; + + message = ply_list_node_get_data (node); + next_node = ply_list_get_next_node (plugin->messages, node); + + write_on_views (plugin, message, strlen (message)); + write_on_views (plugin, "\r\n", strlen ("\r\n")); + + ply_list_remove_node (plugin->messages, node); + node = next_node; + } } static void @@ -349,6 +398,26 @@ display_question (ply_boot_splash_plugin write_on_views (plugin, entry_text, strlen (entry_text)); } +static void +display_message (ply_boot_splash_plugin_t *plugin, + const char *message) +{ + const char *message_to_display; + + if (!strncmp (message, "keys:", strlen ("keys:"))) + message_to_display = message + strlen ("keys:"); + else + message_to_display = message; + + if (plugin->state == PLY_BOOT_SPLASH_DISPLAY_NORMAL) + { + write_on_views (plugin, message_to_display, strlen (message_to_display)); + write_on_views (plugin, "\r\n", strlen ("\r\n")); + } + else + ply_list_append_data (plugin->messages, strdup (message_to_display)); +} + ply_boot_splash_plugin_interface_t * ply_boot_splash_plugin_get_interface (void) { @@ -365,6 +434,7 @@ ply_boot_splash_plugin_get_interface (vo .display_normal = display_normal, .display_password = display_password, .display_question = display_question, + .display_message = display_message, }; return &plugin_interface; --- plymouth-0.8.2.orig/src/plugins/splash/details/Makefile.in +++ plymouth-0.8.2/src/plugins/splash/details/Makefile.in @@ -172,6 +172,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PANGO_CFLAGS = @PANGO_CFLAGS@ PANGO_LIBS = @PANGO_LIBS@ --- plymouth-0.8.2.orig/src/plugins/splash/throbgress/Makefile.in +++ plymouth-0.8.2/src/plugins/splash/throbgress/Makefile.in @@ -173,6 +173,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PANGO_CFLAGS = @PANGO_CFLAGS@ PANGO_LIBS = @PANGO_LIBS@ --- plymouth-0.8.2.orig/src/plugins/splash/fade-throbber/Makefile.in +++ plymouth-0.8.2/src/plugins/splash/fade-throbber/Makefile.in @@ -174,6 +174,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PANGO_CFLAGS = @PANGO_CFLAGS@ PANGO_LIBS = @PANGO_LIBS@ --- plymouth-0.8.2.orig/src/plugins/splash/script/plugin.c +++ plymouth-0.8.2/src/plugins/splash/script/plugin.c @@ -418,6 +418,8 @@ static void become_idle (ply_boot_splash_plugin_t *plugin, ply_trigger_t *idle_trigger) { + stop_animation (plugin); + ply_trigger_pull (idle_trigger, NULL); } --- plymouth-0.8.2.orig/src/plugins/splash/script/Makefile.in +++ plymouth-0.8.2/src/plugins/splash/script/Makefile.in @@ -179,6 +179,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PANGO_CFLAGS = @PANGO_CFLAGS@ PANGO_LIBS = @PANGO_LIBS@ --- plymouth-0.8.2.orig/src/plugins/splash/script/script-lib-sprite.c +++ plymouth-0.8.2/src/plugins/splash/script/script-lib-sprite.c @@ -399,6 +399,45 @@ static script_return_t sprite_window_set return script_return_obj_null (); } +static script_return_t sprite_window_get_bits_per_pixel (script_state_t *state, + void *user_data) +{ + script_lib_sprite_data_t *data = user_data; + ply_list_node_t *node; + int index; + script_obj_t *index_obj; + script_lib_display_t *display; + unsigned int bits_per_pixel; + + index_obj = script_obj_hash_peek_element (state->local, "window"); + + if (index_obj) + { + index = script_obj_as_number (index_obj); + script_obj_unref(index_obj); + if (index < 0) + return script_return_obj_null (); + node = ply_list_get_nth_node (data->displays, index); + if (node == NULL) + return script_return_obj_null (); + display = ply_list_node_get_data (node); + bits_per_pixel = ply_pixel_display_get_bits_per_pixel (display->pixel_display); + return script_return_obj (script_obj_new_number (bits_per_pixel)); + } + + bits_per_pixel = 0; + for (node = ply_list_get_first_node (data->displays); + node; + node = ply_list_get_next_node (data->displays, node)) + { + display = ply_list_node_get_data (node); + bits_per_pixel = ply_pixel_display_get_bits_per_pixel (display->pixel_display); + if (bits_per_pixel) + break; + } + return script_return_obj (script_obj_new_number (bits_per_pixel)); +} + static uint32_t extract_rgb_color (script_state_t *state) { uint8_t red = CLAMP (255 * script_obj_hash_get_number (state->local, "red"), 0, 255); @@ -651,6 +690,12 @@ script_lib_sprite_data_t *script_lib_spr "value", NULL); script_add_native_function (window_hash, + "GetBitsPerPixel", + sprite_window_get_bits_per_pixel, + data, + "window", + NULL); + script_add_native_function (window_hash, "SetBackgroundTopColor", sprite_window_set_background_top_color, data, --- plymouth-0.8.2.orig/src/plugins/splash/script/script-lib-image.c +++ plymouth-0.8.2/src/plugins/splash/script/script-lib-image.c @@ -171,7 +171,7 @@ static script_return_t image_text (scrip alpha_obj = script_obj_hash_peek_element (state->local, "alpha"); - if (alpha_obj) + if (alpha_obj && !script_obj_is_null(alpha_obj)) { alpha = CLAMP(script_obj_as_number (alpha_obj), 0, 1); script_obj_unref(alpha_obj); --- plymouth-0.8.2.orig/src/plugins/splash/space-flares/Makefile.in +++ plymouth-0.8.2/src/plugins/splash/space-flares/Makefile.in @@ -174,6 +174,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PANGO_CFLAGS = @PANGO_CFLAGS@ PANGO_LIBS = @PANGO_LIBS@ --- plymouth-0.8.2.orig/src/plugins/controls/Makefile.in +++ plymouth-0.8.2/src/plugins/controls/Makefile.in @@ -154,6 +154,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PANGO_CFLAGS = @PANGO_CFLAGS@ PANGO_LIBS = @PANGO_LIBS@ --- plymouth-0.8.2.orig/src/plugins/controls/label/Makefile.in +++ plymouth-0.8.2/src/plugins/controls/label/Makefile.in @@ -173,6 +173,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PANGO_CFLAGS = @PANGO_CFLAGS@ PANGO_LIBS = @PANGO_LIBS@ --- plymouth-0.8.2.orig/src/plugins/renderers/Makefile.am +++ plymouth-0.8.2/src/plugins/renderers/Makefile.am @@ -1,2 +1,5 @@ SUBDIRS = frame-buffer drm x11 +if BUILD_VGA16FB +SUBDIRS += vga16fb +endif MAINTAINERCLEANFILES = Makefile.in --- plymouth-0.8.2.orig/src/plugins/renderers/Makefile.in +++ plymouth-0.8.2/src/plugins/renderers/Makefile.in @@ -33,6 +33,7 @@ PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ +@BUILD_VGA16FB_TRUE@am__append_1 = vga16fb subdir = src/plugins/renderers DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 @@ -66,7 +67,7 @@ AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGE distdir ETAGS = etags CTAGS = ctags -DIST_SUBDIRS = $(SUBDIRS) +DIST_SUBDIRS = frame-buffer drm x11 vga16fb DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ @@ -154,6 +155,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PANGO_CFLAGS = @PANGO_CFLAGS@ PANGO_LIBS = @PANGO_LIBS@ @@ -233,7 +235,7 @@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ -SUBDIRS = frame-buffer drm x11 +SUBDIRS = frame-buffer drm x11 $(am__append_1) MAINTAINERCLEANFILES = Makefile.in all: all-recursive --- plymouth-0.8.2.orig/src/plugins/renderers/frame-buffer/plugin.c +++ plymouth-0.8.2/src/plugins/renderers/frame-buffer/plugin.c @@ -56,7 +56,7 @@ #include "ply-renderer-plugin.h" #ifndef PLY_FRAME_BUFFER_DEFAULT_FB_DEVICE_NAME -#define PLY_FRAME_BUFFER_DEFAULT_FB_DEVICE_NAME "/dev/fb" +#define PLY_FRAME_BUFFER_DEFAULT_FB_DEVICE_NAME "/dev/fb0" #endif struct _ply_renderer_head @@ -646,6 +646,16 @@ get_buffer_for_head (ply_renderer_backen return backend->head.pixel_buffer; } +static unsigned int +get_bits_per_pixel_for_head (ply_renderer_backend_t *backend, + ply_renderer_head_t *head) +{ + if (head != &backend->head) + return 0; + + return backend->bytes_per_pixel * 8; +} + static bool has_input_source (ply_renderer_backend_t *backend, ply_renderer_input_source_t *input_source) @@ -739,6 +749,7 @@ ply_renderer_backend_get_interface (void .flush_head = flush_head, .get_heads = get_heads, .get_buffer_for_head = get_buffer_for_head, + .get_bits_per_pixel_for_head = get_bits_per_pixel_for_head, .get_input_source = get_input_source, .open_input_source = open_input_source, .set_handler_for_input_source = set_handler_for_input_source, --- plymouth-0.8.2.orig/src/plugins/renderers/frame-buffer/Makefile.in +++ plymouth-0.8.2/src/plugins/renderers/frame-buffer/Makefile.in @@ -173,6 +173,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PANGO_CFLAGS = @PANGO_CFLAGS@ PANGO_LIBS = @PANGO_LIBS@ --- /dev/null +++ plymouth-0.8.2/src/plugins/renderers/vga16fb/Makefile.am @@ -0,0 +1,20 @@ +INCLUDES = -I$(top_srcdir) \ + -I$(srcdir)/../../../libply \ + -I$(srcdir)/../../../libply-splash-core \ + -I$(srcdir)/../../.. \ + -I$(srcdir)/../.. \ + -I$(srcdir)/.. \ + -I$(srcdir) + +plugindir = $(libdir)/plymouth/renderers +plugin_LTLIBRARIES = vga16fb.la + +vga16fb_la_CFLAGS = $(PLYMOUTH_CFLAGS) + +vga16fb_la_LDFLAGS = -module -avoid-version -export-dynamic +vga16fb_la_LIBADD = $(PLYMOUTH_LIBS) \ + ../../../libply/libply.la \ + ../../../libply-splash-core/libply-splash-core.la +vga16fb_la_SOURCES = $(srcdir)/plugin.c + +MAINTAINERCLEANFILES = Makefile.in --- /dev/null +++ plymouth-0.8.2/src/plugins/renderers/vga16fb/plugin.c @@ -0,0 +1,696 @@ +/* plugin.c - vga16fb renderer plugin + * + * Copyright (C) 2010 Canonical Ltd. + * 2006-2009 Red Hat, Inc. + * 2008 Charlie Brej + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA + * 02111-1307, USA. + * + * Written by: Scott James Remnant + * Charlie Brej + * Kristian Høgsberg + * Peter Jones + * Ray Strode + */ +#include "config.h" + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "ply-buffer.h" +#include "ply-event-loop.h" +#include "ply-list.h" +#include "ply-logger.h" +#include "ply-rectangle.h" +#include "ply-region.h" +#include "ply-terminal.h" + +#include "ply-renderer.h" +#include "ply-renderer-plugin.h" + +#include "vga.h" + +#ifndef PLY_FRAME_BUFFER_DEFAULT_FB_DEVICE_NAME +#define PLY_FRAME_BUFFER_DEFAULT_FB_DEVICE_NAME "/dev/fb0" +#endif + +struct _ply_renderer_head +{ + ply_pixel_buffer_t *pixel_buffer; + ply_rectangle_t area; + char *map_address; + size_t size; + + uint16_t red[16]; + uint16_t green[16]; + uint16_t blue[16]; + uint32_t palette_size; + bool palette_overflow; +}; + +struct _ply_renderer_input_source +{ + ply_renderer_backend_t *backend; + ply_fd_watch_t *terminal_input_watch; + + ply_buffer_t *key_buffer; + + ply_renderer_input_source_handler_t handler; + void *user_data; +}; + +struct _ply_renderer_backend +{ + ply_event_loop_t *loop; + ply_terminal_t *terminal; + + char *device_name; + int device_fd; + + ply_renderer_input_source_t input_source; + ply_renderer_head_t head; + ply_list_t *heads; + + unsigned int row_stride; + unsigned int bits_per_pixel; + + uint32_t is_active : 1; +}; + +ply_renderer_plugin_interface_t *ply_renderer_backend_get_interface (void); +static void ply_renderer_head_redraw (ply_renderer_backend_t *backend, + ply_renderer_head_t *head); +static bool open_input_source (ply_renderer_backend_t *backend, + ply_renderer_input_source_t *input_source); + +static ply_renderer_backend_t * +create_backend (const char *device_name, + ply_terminal_t *terminal) +{ + ply_renderer_backend_t *backend; + + backend = calloc (1, sizeof (ply_renderer_backend_t)); + + if (device_name != NULL) + backend->device_name = strdup (device_name); + else if (getenv ("FRAMEBUFFER") != NULL) + backend->device_name = strdup (getenv ("FRAMEBUFFER")); + else + backend->device_name = + strdup (PLY_FRAME_BUFFER_DEFAULT_FB_DEVICE_NAME); + + backend->loop = ply_event_loop_get_default (); + backend->head.map_address = MAP_FAILED; + backend->heads = ply_list_new (); + backend->input_source.key_buffer = ply_buffer_new (); + backend->terminal = terminal; + + return backend; +} + +static void +initialize_head (ply_renderer_backend_t *backend, + ply_renderer_head_t *head) +{ + head->pixel_buffer = ply_pixel_buffer_new (head->area.width, + head->area.height); + ply_pixel_buffer_fill_with_color (backend->head.pixel_buffer, NULL, + 0.0, 0.0, 0.0, 1.0); + + memset (head->red, 0, sizeof head->red); + memset (head->green, 0, sizeof head->green); + memset (head->blue, 0, sizeof head->blue); + + head->palette_size = 0; + head->palette_overflow = false; + + ply_list_append_data (backend->heads, head); +} + +static void +uninitialize_head (ply_renderer_backend_t *backend, + ply_renderer_head_t *head) +{ + if (head->pixel_buffer != NULL) + { + ply_pixel_buffer_free (head->pixel_buffer); + head->pixel_buffer = NULL; + + ply_list_remove_data (backend->heads, head); + } +} + +static void +destroy_backend (ply_renderer_backend_t *backend) +{ + + free (backend->device_name); + uninitialize_head (backend, &backend->head); + + ply_list_free (backend->heads); + + free (backend); +} + +static void +set_palette (ply_renderer_backend_t *backend, + ply_renderer_head_t *head) +{ + struct fb_cmap cmap; + + if (backend->device_fd < 0) + return; + if (!head->palette_size) + return; + + cmap.start = 0; + cmap.len = head->palette_size;; + cmap.red = head->red; + cmap.green = head->green; + cmap.blue = head->blue; + cmap.transp = NULL; + + ioctl (backend->device_fd, FBIOPUTCMAP, &cmap); +} + +static void +activate (ply_renderer_backend_t *backend) +{ + backend->is_active = true; + + if (backend->head.map_address != MAP_FAILED) + ply_renderer_head_redraw (backend, &backend->head); +} + +static void +deactivate (ply_renderer_backend_t *backend) +{ + backend->is_active = false; +} + +static void +on_active_vt_changed (ply_renderer_backend_t *backend) +{ + if (ply_terminal_is_active (backend->terminal)) + { + activate (backend); + } + else + { + deactivate (backend); + } +} + +static bool +open_device (ply_renderer_backend_t *backend) +{ + backend->device_fd = open (backend->device_name, O_RDWR); + + if (backend->device_fd < 0) + { + ply_trace ("could not open '%s': %m", backend->device_name); + return false; + } + + if (!ply_terminal_open (backend->terminal)) + { + ply_trace ("could not open terminal: %m"); + return false; + } + + if (!ply_terminal_is_vt (backend->terminal)) + { + ply_trace ("terminal is not a VT"); + ply_terminal_close (backend->terminal); + return false; + } + + ply_terminal_watch_for_active_vt_change (backend->terminal, + (ply_terminal_active_vt_changed_handler_t) + on_active_vt_changed, + backend); + + return true; +} + +static void +close_device (ply_renderer_backend_t *backend) +{ + + ply_terminal_stop_watching_for_active_vt_change (backend->terminal, + (ply_terminal_active_vt_changed_handler_t) + on_active_vt_changed, + backend); + uninitialize_head (backend, &backend->head); + + close (backend->device_fd); + backend->device_fd = -1; + + backend->head.area.x = 0; + backend->head.area.y = 0; + backend->head.area.width = 0; + backend->head.area.height = 0; +} + +static bool +query_device (ply_renderer_backend_t *backend) +{ + struct fb_var_screeninfo variable_screen_info; + struct fb_fix_screeninfo fixed_screen_info; + + assert (backend != NULL); + assert (backend->device_fd >= 0); + + if (ioctl (backend->device_fd, FBIOGET_VSCREENINFO, &variable_screen_info) < 0) + return false; + + if (ioctl (backend->device_fd, FBIOGET_FSCREENINFO, &fixed_screen_info) < 0) + return false; + + /* We only support the vga16fb with its own kooky planar colour mode. */ + if ((fixed_screen_info.type != FB_TYPE_VGA_PLANES) + || (fixed_screen_info.type_aux != FB_AUX_VGA_PLANES_VGA4) + || (fixed_screen_info.visual != FB_VISUAL_PSEUDOCOLOR) + || (variable_screen_info.bits_per_pixel != 4)) + { + ply_trace ("Doesn't look like vga16fb\n"); + return false; + } + + backend->head.area.x = variable_screen_info.xoffset; + backend->head.area.y = variable_screen_info.yoffset; + backend->head.area.width = variable_screen_info.xres; + backend->head.area.height = variable_screen_info.yres; + + backend->row_stride = fixed_screen_info.line_length; + backend->bits_per_pixel = variable_screen_info.bits_per_pixel; + backend->head.size = backend->head.area.height * backend->row_stride; + + initialize_head (backend, &backend->head); + + return true; + +} + +static bool +map_to_device (ply_renderer_backend_t *backend) +{ + ply_renderer_head_t *head; + + assert (backend != NULL); + assert (backend->device_fd >= 0); + + head = &backend->head; + assert (head->size > 0); + + if (ioperm (VGA_REGS_BASE, VGA_REGS_LEN, 1) < 0) { + ply_trace ("could not obtain permission to write to VGA regs: %m"); + return false; + } + + head->map_address = mmap (NULL, head->size, PROT_WRITE, + MAP_SHARED, backend->device_fd, 0); + + if (head->map_address == MAP_FAILED) { + ply_trace ("could not map VGA memory: %m"); + return false; + } + + if (ply_terminal_is_active (backend->terminal)) + activate (backend); + else + ply_terminal_activate_vt (backend->terminal); + + return true; +} + +static void +unmap_from_device (ply_renderer_backend_t *backend) +{ + ply_renderer_head_t *head; + + head = &backend->head; + + if (head->map_address != MAP_FAILED) + { + munmap (head->map_address, head->size); + head->map_address = MAP_FAILED; + } +} + +static unsigned int +argb32_pixel_value_to_color_index (ply_renderer_backend_t *backend, + ply_renderer_head_t *head, + uint32_t pixel_value) +{ + uint16_t red, green, blue; + unsigned int min_shift, max_shift, shift, index; + + red = (pixel_value >> 16) & 0xff; + green = (pixel_value >> 8) & 0xff; + blue = pixel_value & 0xff; + + /* The 6 here is entirely arbitrary; that means we keep the top two bits + * of each colour when comparing against existing colors in the palette; + * in theory meaning a maximum of 64 -- that's still too many, so we + * then try again with 7 bits and a maximum of 8 -- in between those two + * is the 16 we actually have room for. + */ + if (head->palette_overflow) + { + min_shift = 6; + max_shift = 8; + } + else + { + min_shift = 0; + max_shift = 1; + } + + for (shift = min_shift; shift < max_shift; shift++) + { + for (index = 0; index < head->palette_size; index++) + if ( ((head->red[index] >> (8 + shift)) == (red >> shift)) + && ((head->green[index] >> (8 + shift)) == (green >> shift)) + && ((head->blue[index] >> (8 + shift)) == (blue >> shift))) + return index; + + if (head->palette_size < 16) + { + index = head->palette_size++; + + head->red[index] = red << 8; + head->green[index] = green << 8; + head->blue[index] = blue << 8; + + set_palette (backend, head); + ply_trace ("palette now has %d colours (added %06x)\n", + head->palette_size, pixel_value & 0xffffff); + + return index; + } + } + + ply_trace ("could not find colour in palette for %06x\n", + pixel_value & 0xffffff); + + if (!head->palette_overflow) + { + head->palette_overflow = true; + } + + /* Didn't find a colour, so just return the last + * (first is probably background colour so a bad choice) + */ + return head->palette_size - 1;; +} + +static void +flush_area (ply_renderer_backend_t *backend, + ply_renderer_head_t *head, + ply_rectangle_t *area_to_flush) +{ + unsigned char *mask; + uint32_t *shadow_buffer; + unsigned long x1, x2, y1, y2, x, y; + unsigned int c, b; + + mask = malloc (backend->row_stride * 16); + + shadow_buffer = ply_pixel_buffer_get_argb32_data (backend->head.pixel_buffer); + + x1 = area_to_flush->x; + y1 = area_to_flush->y; + x2 = x1 + area_to_flush->width; + y2 = y1 + area_to_flush->height; + + for (y = y1; y < y2; y++) + { + memset (mask, 0, backend->row_stride * 16); + + for (x = x1; x < x2; x++) + { + unsigned int index; + uint32_t pixel; + + pixel = shadow_buffer[x + y * head->area.width]; + index = argb32_pixel_value_to_color_index (backend, head, pixel); + + mask[index * backend->row_stride + x / 8] |= (0x80 >> (x % 8)); + } + + for (c = 0; c < 16; c++) + { + for (b = x1 / 8; b < x2 / 8 + 1; b++) + { + char *p; + + if (!mask[c * backend->row_stride + b]) + continue; + + vga_set_reset (c); + vga_bit_mask (mask[c * backend->row_stride + b]); + + p = head->map_address + y * backend->row_stride + b; + *p |= 1; + } + } + } + + free (mask); +} + +static void +flush_head (ply_renderer_backend_t *backend, + ply_renderer_head_t *head) +{ + ply_region_t *updated_region; + ply_list_t *areas_to_flush; + ply_list_node_t *node; + ply_pixel_buffer_t *pixel_buffer; + bool was_overflowed; + + assert (backend != NULL); + assert (&backend->head == head); + + if (!backend->is_active) + return; + + ply_terminal_set_mode (backend->terminal, PLY_TERMINAL_MODE_GRAPHICS); + ply_terminal_set_unbuffered_input (backend->terminal); + + /* Reset to basic values; enable use of the Set/Reset register for all + * planes. + */ + vga_enable_set_reset (0xf); + vga_mode (0); + vga_data_rotate (0); + vga_map_mask (0xff); + + was_overflowed = backend->head.palette_overflow; + set_palette (backend, &backend->head); + + pixel_buffer = head->pixel_buffer; + updated_region = ply_pixel_buffer_get_updated_areas (pixel_buffer); + areas_to_flush = ply_region_get_sorted_rectangle_list (updated_region); + + node = ply_list_get_first_node (areas_to_flush); + while (node != NULL) + { + ply_list_node_t *next_node; + ply_rectangle_t *area_to_flush; + + area_to_flush = (ply_rectangle_t *) ply_list_node_get_data (node); + + next_node = ply_list_get_next_node (areas_to_flush, node); + + flush_area (backend, head, area_to_flush); + + node = next_node; + } + + ply_region_clear (updated_region); + + /* If the palette overflowed, render the screen again with a new palette */ + if ((!was_overflowed) && head->palette_overflow) + { + ply_trace ("palette overflowed, redrawing entire screen with new palette"); + + head->palette_size = 0; + ply_renderer_head_redraw (backend, head); + } +} + +static void +ply_renderer_head_redraw (ply_renderer_backend_t *backend, + ply_renderer_head_t *head) +{ + ply_region_t *region; + + region = ply_pixel_buffer_get_updated_areas (head->pixel_buffer); + + ply_region_add_rectangle (region, &head->area); + + flush_head (backend, head); +} + +static ply_list_t * +get_heads (ply_renderer_backend_t *backend) +{ + return backend->heads; +} + +static ply_pixel_buffer_t * +get_buffer_for_head (ply_renderer_backend_t *backend, + ply_renderer_head_t *head) +{ + + if (head != &backend->head) + return NULL; + + return backend->head.pixel_buffer; +} + +static unsigned int +get_bits_per_pixel_for_head (ply_renderer_backend_t *backend, + ply_renderer_head_t *head) +{ + if (head != &backend->head) + return 0; + + return backend->bits_per_pixel; +} + +static bool +has_input_source (ply_renderer_backend_t *backend, + ply_renderer_input_source_t *input_source) +{ + return input_source == &backend->input_source; +} + +static ply_renderer_input_source_t * +get_input_source (ply_renderer_backend_t *backend) +{ + return &backend->input_source; +} + +static void +on_key_event (ply_renderer_input_source_t *input_source, + int terminal_fd) +{ + ply_buffer_append_from_fd (input_source->key_buffer, + terminal_fd); + + if (input_source->handler != NULL) + input_source->handler (input_source->user_data, input_source->key_buffer, input_source); + +} + +static void +on_input_source_disconnected (ply_renderer_input_source_t *input_source) +{ + ply_trace ("input source disconnected, reopening"); + open_input_source (input_source->backend, input_source); +} + +static bool +open_input_source (ply_renderer_backend_t *backend, + ply_renderer_input_source_t *input_source) +{ + int terminal_fd; + + assert (backend != NULL); + assert (has_input_source (backend, input_source)); + + terminal_fd = ply_terminal_get_fd (backend->terminal); + + input_source->backend = backend; + input_source->terminal_input_watch = ply_event_loop_watch_fd (backend->loop, terminal_fd, PLY_EVENT_LOOP_FD_STATUS_HAS_DATA, + (ply_event_handler_t) on_key_event, + (ply_event_handler_t) on_input_source_disconnected, + input_source); + return true; +} + +static void +set_handler_for_input_source (ply_renderer_backend_t *backend, + ply_renderer_input_source_t *input_source, + ply_renderer_input_source_handler_t handler, + void *user_data) +{ + assert (backend != NULL); + assert (has_input_source (backend, input_source)); + + input_source->handler = handler; + input_source->user_data = user_data; +} + +static void +close_input_source (ply_renderer_backend_t *backend, + ply_renderer_input_source_t *input_source) +{ + assert (backend != NULL); + assert (has_input_source (backend, input_source)); + + ply_event_loop_stop_watching_fd (backend->loop, input_source->terminal_input_watch); + input_source->terminal_input_watch = NULL; + input_source->backend = NULL; +} + +ply_renderer_plugin_interface_t * +ply_renderer_backend_get_interface (void) +{ + static ply_renderer_plugin_interface_t plugin_interface = + { + .create_backend = create_backend, + .destroy_backend = destroy_backend, + .open_device = open_device, + .close_device = close_device, + .query_device = query_device, + .map_to_device = map_to_device, + .unmap_from_device = unmap_from_device, + .activate = activate, + .deactivate = deactivate, + .flush_head = flush_head, + .get_heads = get_heads, + .get_buffer_for_head = get_buffer_for_head, + .get_bits_per_pixel_for_head = get_bits_per_pixel_for_head, + .get_input_source = get_input_source, + .open_input_source = open_input_source, + .set_handler_for_input_source = set_handler_for_input_source, + .close_input_source = close_input_source + }; + + return &plugin_interface; +} +/* vim: set ts=4 sw=4 et ai ci cino={.5s,^-2,+.5s,t0,g0,e-2,n-2,p2s,(0,=.5s,:.5s */ --- /dev/null +++ plymouth-0.8.2/src/plugins/renderers/vga16fb/Makefile.in @@ -0,0 +1,592 @@ +# Makefile.in generated by automake 1.11.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +subdir = src/plugins/renderers/vga16fb +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ + $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__installdirs = "$(DESTDIR)$(plugindir)" +LTLIBRARIES = $(plugin_LTLIBRARIES) +am__DEPENDENCIES_1 = +vga16fb_la_DEPENDENCIES = $(am__DEPENDENCIES_1) \ + ../../../libply/libply.la \ + ../../../libply-splash-core/libply-splash-core.la +am_vga16fb_la_OBJECTS = vga16fb_la-plugin.lo +vga16fb_la_OBJECTS = $(am_vga16fb_la_OBJECTS) +AM_V_lt = $(am__v_lt_$(V)) +am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY)) +am__v_lt_0 = --silent +vga16fb_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(vga16fb_la_CFLAGS) \ + $(CFLAGS) $(vga16fb_la_LDFLAGS) $(LDFLAGS) -o $@ +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) +depcomp = $(SHELL) $(top_srcdir)/build-tools/depcomp +am__depfiles_maybe = depfiles +am__mv = mv -f +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CFLAGS) $(CFLAGS) +AM_V_CC = $(am__v_CC_$(V)) +am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY)) +am__v_CC_0 = @echo " CC " $@; +AM_V_at = $(am__v_at_$(V)) +am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) +am__v_at_0 = @ +CCLD = $(CC) +LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_CCLD = $(am__v_CCLD_$(V)) +am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY)) +am__v_CCLD_0 = @echo " CCLD " $@; +AM_V_GEN = $(am__v_GEN_$(V)) +am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) +am__v_GEN_0 = @echo " GEN " $@; +SOURCES = $(vga16fb_la_SOURCES) +DIST_SOURCES = $(vga16fb_la_SOURCES) +ETAGS = etags +CTAGS = ctags +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DRM_CFLAGS = @DRM_CFLAGS@ +DRM_LIBS = @DRM_LIBS@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GREP = @GREP@ +GTK_CFLAGS = @GTK_CFLAGS@ +GTK_LIBS = @GTK_LIBS@ +IMAGE_CFLAGS = @IMAGE_CFLAGS@ +IMAGE_LIBS = @IMAGE_LIBS@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +LT_AGE = @LT_AGE@ +LT_CURRENT = @LT_CURRENT@ +LT_REVISION = @LT_REVISION@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MKDIR_P = @MKDIR_P@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PANGO_CFLAGS = @PANGO_CFLAGS@ +PANGO_LIBS = @PANGO_LIBS@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PKG_CONFIG = @PKG_CONFIG@ +PLYMOUTH_CFLAGS = @PLYMOUTH_CFLAGS@ +PLYMOUTH_CONF_DIR = @PLYMOUTH_CONF_DIR@ +PLYMOUTH_DATADIR = @PLYMOUTH_DATADIR@ +PLYMOUTH_LIBDIR = @PLYMOUTH_LIBDIR@ +PLYMOUTH_LIBEXECDIR = @PLYMOUTH_LIBEXECDIR@ +PLYMOUTH_LIBS = @PLYMOUTH_LIBS@ +PLYMOUTH_PLUGIN_PATH = @PLYMOUTH_PLUGIN_PATH@ +PLYMOUTH_POLICY_DIR = @PLYMOUTH_POLICY_DIR@ +PLYMOUTH_THEME_PATH = @PLYMOUTH_THEME_PATH@ +RANLIB = @RANLIB@ +RELEASE_FILE = @RELEASE_FILE@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +VERSION = @VERSION@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +background_color = @background_color@ +background_end_color = @background_end_color@ +background_start_color = @background_start_color@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +logofile = @logofile@ +lt_ECHO = @lt_ECHO@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +plymouthclientdir = @plymouthclientdir@ +plymouthdaemondir = @plymouthdaemondir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +INCLUDES = -I$(top_srcdir) \ + -I$(srcdir)/../../../libply \ + -I$(srcdir)/../../../libply-splash-core \ + -I$(srcdir)/../../.. \ + -I$(srcdir)/../.. \ + -I$(srcdir)/.. \ + -I$(srcdir) + +plugindir = $(libdir)/plymouth/renderers +plugin_LTLIBRARIES = vga16fb.la +vga16fb_la_CFLAGS = $(PLYMOUTH_CFLAGS) +vga16fb_la_LDFLAGS = -module -avoid-version -export-dynamic +vga16fb_la_LIBADD = $(PLYMOUTH_LIBS) \ + ../../../libply/libply.la \ + ../../../libply-splash-core/libply-splash-core.la + +vga16fb_la_SOURCES = $(srcdir)/plugin.c +MAINTAINERCLEANFILES = Makefile.in +all: all-am + +.SUFFIXES: +.SUFFIXES: .c .lo .o .obj +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/plugins/renderers/vga16fb/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu src/plugins/renderers/vga16fb/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): +install-pluginLTLIBRARIES: $(plugin_LTLIBRARIES) + @$(NORMAL_INSTALL) + test -z "$(plugindir)" || $(MKDIR_P) "$(DESTDIR)$(plugindir)" + @list='$(plugin_LTLIBRARIES)'; test -n "$(plugindir)" || list=; \ + list2=; for p in $$list; do \ + if test -f $$p; then \ + list2="$$list2 $$p"; \ + else :; fi; \ + done; \ + test -z "$$list2" || { \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(plugindir)'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(plugindir)"; \ + } + +uninstall-pluginLTLIBRARIES: + @$(NORMAL_UNINSTALL) + @list='$(plugin_LTLIBRARIES)'; test -n "$(plugindir)" || list=; \ + for p in $$list; do \ + $(am__strip_dir) \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(plugindir)/$$f'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(plugindir)/$$f"; \ + done + +clean-pluginLTLIBRARIES: + -test -z "$(plugin_LTLIBRARIES)" || rm -f $(plugin_LTLIBRARIES) + @list='$(plugin_LTLIBRARIES)'; for p in $$list; do \ + dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ + test "$$dir" != "$$p" || dir=.; \ + echo "rm -f \"$${dir}/so_locations\""; \ + rm -f "$${dir}/so_locations"; \ + done +vga16fb.la: $(vga16fb_la_OBJECTS) $(vga16fb_la_DEPENDENCIES) + $(AM_V_CCLD)$(vga16fb_la_LINK) -rpath $(plugindir) $(vga16fb_la_OBJECTS) $(vga16fb_la_LIBADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vga16fb_la-plugin.Plo@am__quote@ + +.c.o: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c $< + +.c.obj: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + +.c.lo: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< + +vga16fb_la-plugin.lo: $(srcdir)/plugin.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vga16fb_la_CFLAGS) $(CFLAGS) -MT vga16fb_la-plugin.lo -MD -MP -MF $(DEPDIR)/vga16fb_la-plugin.Tpo -c -o vga16fb_la-plugin.lo `test -f '$(srcdir)/plugin.c' || echo '$(srcdir)/'`$(srcdir)/plugin.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/vga16fb_la-plugin.Tpo $(DEPDIR)/vga16fb_la-plugin.Plo +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$(srcdir)/plugin.c' object='vga16fb_la-plugin.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vga16fb_la_CFLAGS) $(CFLAGS) -c -o vga16fb_la-plugin.lo `test -f '$(srcdir)/plugin.c' || echo '$(srcdir)/'`$(srcdir)/plugin.c + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + set x; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: CTAGS +CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(LTLIBRARIES) +installdirs: + for dir in "$(DESTDIR)$(plugindir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." + -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) +clean: clean-am + +clean-am: clean-generic clean-libtool clean-pluginLTLIBRARIES \ + mostlyclean-am + +distclean: distclean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: install-pluginLTLIBRARIES + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-pluginLTLIBRARIES + +.MAKE: install-am install-strip + +.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ + clean-libtool clean-pluginLTLIBRARIES ctags distclean \ + distclean-compile distclean-generic distclean-libtool \ + distclean-tags distdir dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-pluginLTLIBRARIES \ + install-ps install-ps-am install-strip installcheck \ + installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-compile \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ + tags uninstall uninstall-am uninstall-pluginLTLIBRARIES + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: --- /dev/null +++ plymouth-0.8.2/src/plugins/renderers/vga16fb/vga.h @@ -0,0 +1,107 @@ +/* vga.h - inlines for programming the VGA + * + * Copyright (C) 2010 Canonical Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA + * 02111-1307, USA. + * + * Written by: Scott James Remnant + */ +#ifndef PLY_VGA_H +#define PLY_VGA_H + +/* VGA ioports, and the registers we can access from them */ +#define VGA_REGS_BASE 0x3c0 +#define VGA_REGS_LEN 0x10 + +#define VGA_SC_INDEX 0x3c4 +#define VGA_SC_DATA 0x3c5 + +#define VGA_SC_MAP_MASK 0x02 + +#define VGA_GC_INDEX 0x3ce +#define VGA_GC_DATA 0x3cf + +#define VGA_GC_SET_RESET 0x00 +#define VGA_GC_ENABLE_SET_RESET 0x01 +#define VGA_GC_DATA_ROTATE 0x03 +#define VGA_GC_MODE 0x05 +#define VGA_GC_BIT_MASK 0x08 + +/* Select the VGA write mode. */ +static inline void +vga_mode (int mode) +{ + outb (VGA_GC_MODE, VGA_GC_INDEX); + outb (mode, VGA_GC_DATA); +} + +/* Data Rotate register; we don't use this, we just ensure it's off. */ +static inline void +vga_data_rotate (int op) +{ + outb (VGA_GC_DATA_ROTATE, VGA_GC_INDEX); + outb (op, VGA_GC_DATA); +} + +/* Enable use of the Set/Reset register for the given planes (as a mask). + * + * In effect: set this to 0xf to use all four planes. + */ +static inline void +vga_enable_set_reset (int mask) +{ + outb (VGA_GC_ENABLE_SET_RESET, VGA_GC_INDEX); + outb (mask, VGA_GC_DATA); +} + +/* Set/Reset register; the given planes (as a mask) will have whatever bits + * are true in the Bit Mask register set to 1, and whatever bits are false + * in the Bit Mask register set to 0. (It's more complicated than that, but + * your brain will explode). + * + * In effect: set this to the colour you want. + */ +static inline void +vga_set_reset (int mask) +{ + outb (VGA_GC_SET_RESET, VGA_GC_INDEX); + outb (mask, VGA_GC_DATA); +} + +/* Bit Mask register; writing to a memory address will write to these bits + * of that byte according to the contents of the Set/Reset register. Far + * more complicated than that, you *really* don't want to know. + * + * In effect: set this to the pattern we want in the colour we set. + */ +static inline void +vga_bit_mask (int mask) +{ + outb (VGA_GC_BIT_MASK, VGA_GC_INDEX); + outb (mask, VGA_GC_DATA); +} + +/* Map Mask register; we don't use this, but we do make sure it's reset. */ +static inline void +vga_map_mask (int mask) +{ + outb (VGA_SC_MAP_MASK, VGA_SC_INDEX); + outb (mask, VGA_SC_DATA); +} + +#endif /* PLY_VGA_H */ +/* vim: set ts=4 sw=4 et ai ci cino={.5s,^-2,+.5s,t0,g0,e-2,n-2,p2s,(0,=.5s,:.5s */ + --- plymouth-0.8.2.orig/src/plugins/renderers/x11/Makefile.in +++ plymouth-0.8.2/src/plugins/renderers/x11/Makefile.in @@ -172,6 +172,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PANGO_CFLAGS = @PANGO_CFLAGS@ PANGO_LIBS = @PANGO_LIBS@ --- plymouth-0.8.2.orig/src/plugins/renderers/drm/plugin.c +++ plymouth-0.8.2/src/plugins/renderers/drm/plugin.c @@ -454,10 +454,15 @@ load_driver (ply_renderer_backend_t *bac backend->driver_interface = ply_renderer_radeon_driver_get_interface (); backend->driver_supports_mapping_console = false; } - else if (strcmp (driver_name, "nouveau") == 0) + else if (strcmp (driver_name, "nouveau") == 0 + || strcmp (driver_name, "lbm-nouveau") == 0) { +#ifdef GDM_HANGING_IS_FINE_WITH_ME backend->driver_interface = ply_renderer_nouveau_driver_get_interface (); backend->driver_supports_mapping_console = false; +#else + ply_trace("falling back to framebuffer for nouveau to avoid DRM hang"); +#endif } free (driver_name); --- plymouth-0.8.2.orig/src/plugins/renderers/drm/Makefile.in +++ plymouth-0.8.2/src/plugins/renderers/drm/Makefile.in @@ -175,6 +175,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PANGO_CFLAGS = @PANGO_CFLAGS@ PANGO_LIBS = @PANGO_LIBS@ --- plymouth-0.8.2.orig/src/libply-splash-graphics/Makefile.in +++ plymouth-0.8.2/src/libply-splash-graphics/Makefile.in @@ -186,6 +186,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PANGO_CFLAGS = @PANGO_CFLAGS@ PANGO_LIBS = @PANGO_LIBS@ --- plymouth-0.8.2.orig/src/libply/Makefile.in +++ plymouth-0.8.2/src/libply/Makefile.in @@ -219,6 +219,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PANGO_CFLAGS = @PANGO_CFLAGS@ PANGO_LIBS = @PANGO_LIBS@ --- plymouth-0.8.2.orig/src/libply/tests/Makefile.in +++ plymouth-0.8.2/src/libply/tests/Makefile.in @@ -342,6 +342,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PANGO_CFLAGS = @PANGO_CFLAGS@ PANGO_LIBS = @PANGO_LIBS@ --- plymouth-0.8.2.orig/src/tests/Makefile.in +++ plymouth-0.8.2/src/tests/Makefile.in @@ -195,6 +195,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PANGO_CFLAGS = @PANGO_CFLAGS@ PANGO_LIBS = @PANGO_LIBS@ --- plymouth-0.8.2.orig/src/libply-splash-core/ply-renderer-plugin.h +++ plymouth-0.8.2/src/libply-splash-core/ply-renderer-plugin.h @@ -54,6 +54,8 @@ typedef struct ply_pixel_buffer_t * (* get_buffer_for_head) (ply_renderer_backend_t *backend, ply_renderer_head_t *head); + unsigned int (* get_bits_per_pixel_for_head) (ply_renderer_backend_t *backend, + ply_renderer_head_t *head); ply_renderer_input_source_t * (* get_input_source) (ply_renderer_backend_t *backend); bool (* open_input_source) (ply_renderer_backend_t *backend, --- plymouth-0.8.2.orig/src/libply-splash-core/ply-pixel-display.c +++ plymouth-0.8.2/src/libply-splash-core/ply-pixel-display.c @@ -51,6 +51,7 @@ struct _ply_pixel_display unsigned long width; unsigned long height; + unsigned int bits_per_pixel; ply_pixel_display_draw_handler_t draw_handler; void *draw_handler_user_data; @@ -79,6 +80,9 @@ ply_pixel_display_new (ply_renderer_t display->width = size.width; display->height = size.height; + display->bits_per_pixel = ply_renderer_get_bits_per_pixel_for_head (renderer, + head); + return display; } @@ -94,6 +98,12 @@ ply_pixel_display_get_height (ply_pixel_ return display->height; } +unsigned int +ply_pixel_display_get_bits_per_pixel (ply_pixel_display_t *display) +{ + return display->bits_per_pixel; +} + static void ply_pixel_display_flush (ply_pixel_display_t *display) { --- plymouth-0.8.2.orig/src/libply-splash-core/Makefile.in +++ plymouth-0.8.2/src/libply-splash-core/Makefile.in @@ -185,6 +185,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PANGO_CFLAGS = @PANGO_CFLAGS@ PANGO_LIBS = @PANGO_LIBS@ --- plymouth-0.8.2.orig/src/libply-splash-core/ply-renderer.c +++ plymouth-0.8.2/src/libply-splash-core/ply-renderer.c @@ -231,6 +231,7 @@ ply_renderer_open (ply_renderer_t *rende PLYMOUTH_PLUGIN_PATH "renderers/x11.so", PLYMOUTH_PLUGIN_PATH "renderers/drm.so", PLYMOUTH_PLUGIN_PATH "renderers/frame-buffer.so", + PLYMOUTH_PLUGIN_PATH "renderers/vga16fb.so", NULL }; @@ -310,6 +311,21 @@ ply_renderer_get_buffer_for_head (ply_re head); } +unsigned int +ply_renderer_get_bits_per_pixel_for_head (ply_renderer_t *renderer, + ply_renderer_head_t *head) +{ + assert (renderer != NULL); + assert (renderer->plugin_interface != NULL); + assert (head != NULL); + + if (!renderer->plugin_interface->get_bits_per_pixel_for_head) + return 0; + + return renderer->plugin_interface->get_bits_per_pixel_for_head (renderer->backend, + head); +} + void ply_renderer_flush_head (ply_renderer_t *renderer, ply_renderer_head_t *head) --- plymouth-0.8.2.orig/src/libply-splash-core/ply-pixel-display.h +++ plymouth-0.8.2/src/libply-splash-core/ply-pixel-display.h @@ -48,6 +48,7 @@ void ply_pixel_display_free (ply_pixel_d unsigned long ply_pixel_display_get_width (ply_pixel_display_t *display); unsigned long ply_pixel_display_get_height (ply_pixel_display_t *display); +unsigned int ply_pixel_display_get_bits_per_pixel (ply_pixel_display_t *display); void ply_pixel_display_set_draw_handler (ply_pixel_display_t *display, ply_pixel_display_draw_handler_t draw_handler, --- plymouth-0.8.2.orig/src/libply-splash-core/ply-renderer.h +++ plymouth-0.8.2/src/libply-splash-core/ply-renderer.h @@ -50,6 +50,8 @@ void ply_renderer_deactivate (ply_render ply_list_t *ply_renderer_get_heads (ply_renderer_t *renderer); ply_pixel_buffer_t *ply_renderer_get_buffer_for_head (ply_renderer_t *renderer, ply_renderer_head_t *head); +unsigned int ply_renderer_get_bits_per_pixel_for_head (ply_renderer_t *renderer, + ply_renderer_head_t *head); void ply_renderer_flush_head (ply_renderer_t *renderer, ply_renderer_head_t *head); --- plymouth-0.8.2.orig/build-tools/config.guess +++ plymouth-0.8.2/build-tools/config.guess @@ -4,7 +4,7 @@ # 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 # Free Software Foundation, Inc. -timestamp='2009-11-20' +timestamp='2009-06-10' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by @@ -27,16 +27,16 @@ timestamp='2009-11-20' # the same distribution terms that you use for the rest of that program. -# Originally written by Per Bothner. Please send patches (context -# diff format) to and include a ChangeLog -# entry. +# Originally written by Per Bothner . +# Please send patches to . Submit a context +# diff and a properly formatted ChangeLog entry. # # This script attempts to guess a canonical system name similar to # config.sub. If it succeeds, it prints the system name on stdout, and # exits with 0. Otherwise, it exits with 1. # -# You can get the latest version of this script from: -# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD +# The plan is that this can be called by configure scripts if you +# don't specify an explicit build system type. me=`echo "$0" | sed -e 's,.*/,,'` @@ -333,9 +333,6 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; - i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) - echo i386-pc-auroraux${UNAME_RELEASE} - exit ;; i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) eval $set_cc_for_build SUN_ARCH="i386" @@ -810,12 +807,12 @@ EOF i*:PW*:*) echo ${UNAME_MACHINE}-pc-pw32 exit ;; - *:Interix*:*) + *:Interix*:[3456]*) case ${UNAME_MACHINE} in x86) echo i586-pc-interix${UNAME_RELEASE} exit ;; - authenticamd | genuineintel | EM64T) + EM64T | authenticamd | genuineintel) echo x86_64-unknown-interix${UNAME_RELEASE} exit ;; IA64) @@ -857,20 +854,6 @@ EOF i*86:Minix:*:*) echo ${UNAME_MACHINE}-pc-minix exit ;; - alpha:Linux:*:*) - case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in - EV5) UNAME_MACHINE=alphaev5 ;; - EV56) UNAME_MACHINE=alphaev56 ;; - PCA56) UNAME_MACHINE=alphapca56 ;; - PCA57) UNAME_MACHINE=alphapca56 ;; - EV6) UNAME_MACHINE=alphaev6 ;; - EV67) UNAME_MACHINE=alphaev67 ;; - EV68*) UNAME_MACHINE=alphaev68 ;; - esac - objdump --private-headers /bin/sh | grep -q ld.so.1 - if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi - echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} - exit ;; arm*:Linux:*:*) eval $set_cc_for_build if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ @@ -893,17 +876,6 @@ EOF frv:Linux:*:*) echo frv-unknown-linux-gnu exit ;; - i*86:Linux:*:*) - LIBC=gnu - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #ifdef __dietlibc__ - LIBC=dietlibc - #endif -EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'` - echo "${UNAME_MACHINE}-pc-linux-${LIBC}" - exit ;; ia64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; @@ -929,18 +901,39 @@ EOF #endif #endif EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'` + eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' + /^CPU/{ + s: ::g + p + }'`" test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } ;; or32:Linux:*:*) echo or32-unknown-linux-gnu exit ;; + ppc:Linux:*:*) + echo powerpc-unknown-linux-gnu + exit ;; + ppc64:Linux:*:*) + echo powerpc64-unknown-linux-gnu + exit ;; + alpha:Linux:*:*) + case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in + EV5) UNAME_MACHINE=alphaev5 ;; + EV56) UNAME_MACHINE=alphaev56 ;; + PCA56) UNAME_MACHINE=alphapca56 ;; + PCA57) UNAME_MACHINE=alphapca56 ;; + EV6) UNAME_MACHINE=alphaev6 ;; + EV67) UNAME_MACHINE=alphaev67 ;; + EV68*) UNAME_MACHINE=alphaev68 ;; + esac + objdump --private-headers /bin/sh | grep -q ld.so.1 + if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi + echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} + exit ;; padre:Linux:*:*) echo sparc-unknown-linux-gnu exit ;; - parisc64:Linux:*:* | hppa64:Linux:*:*) - echo hppa64-unknown-linux-gnu - exit ;; parisc:Linux:*:* | hppa:Linux:*:*) # Look for CPU level case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in @@ -949,11 +942,8 @@ EOF *) echo hppa-unknown-linux-gnu ;; esac exit ;; - ppc64:Linux:*:*) - echo powerpc64-unknown-linux-gnu - exit ;; - ppc:Linux:*:*) - echo powerpc-unknown-linux-gnu + parisc64:Linux:*:* | hppa64:Linux:*:*) + echo hppa64-unknown-linux-gnu exit ;; s390:Linux:*:* | s390x:Linux:*:*) echo ${UNAME_MACHINE}-ibm-linux @@ -976,6 +966,58 @@ EOF xtensa*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; + i*86:Linux:*:*) + # The BFD linker knows what the default object file format is, so + # first see if it will tell us. cd to the root directory to prevent + # problems with other programs or directories called `ld' in the path. + # Set LC_ALL=C to ensure ld outputs messages in English. + ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ + | sed -ne '/supported targets:/!d + s/[ ][ ]*/ /g + s/.*supported targets: *// + s/ .*// + p'` + case "$ld_supported_targets" in + elf32-i386) + TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" + ;; + esac + # Determine whether the default compiler is a.out or elf + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + #ifdef __ELF__ + # ifdef __GLIBC__ + # if __GLIBC__ >= 2 + LIBC=gnu + # else + LIBC=gnulibc1 + # endif + # else + LIBC=gnulibc1 + # endif + #else + #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC) + LIBC=gnu + #else + LIBC=gnuaout + #endif + #endif + #ifdef __dietlibc__ + LIBC=dietlibc + #endif +EOF + eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' + /^LIBC/{ + s: ::g + p + }'`" + test x"${LIBC}" != x && { + echo "${UNAME_MACHINE}-pc-linux-${LIBC}" + exit + } + test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; } + ;; i*86:DYNIX/ptx:4*:*) # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. # earlier versions are messed up and put the nodename in both @@ -1205,16 +1247,6 @@ EOF *:Darwin:*:*) UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown case $UNAME_PROCESSOR in - i386) - eval $set_cc_for_build - if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then - if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ - (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ - grep IS_64BIT_ARCH >/dev/null - then - UNAME_PROCESSOR="x86_64" - fi - fi ;; unknown) UNAME_PROCESSOR=powerpc ;; esac echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} --- plymouth-0.8.2.orig/build-tools/config.sub +++ plymouth-0.8.2/build-tools/config.sub @@ -4,7 +4,7 @@ # 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 # Free Software Foundation, Inc. -timestamp='2009-11-20' +timestamp='2009-06-11' # This file is (in principle) common to ALL GNU software. # The presence of a machine in this file suggests that SOME GNU software @@ -32,16 +32,13 @@ timestamp='2009-11-20' # Please send patches to . Submit a context -# diff and a properly formatted GNU ChangeLog entry. +# diff and a properly formatted ChangeLog entry. # # Configuration subroutine to validate and canonicalize a configuration type. # Supply the specified configuration type as an argument. # If it is invalid, we print an error message on stderr and exit with code 1. # Otherwise, we print the canonical config type on stdout and succeed. -# You can get the latest version of this script from: -# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD - # This file is supposed to be the same for all GNU packages # and recognize all the CPU types, system types and aliases # that are meaningful with *any* GNU software. @@ -152,7 +149,7 @@ case $os in -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ - -apple | -axis | -knuth | -cray | -microblaze) + -apple | -axis | -knuth | -cray) os= basic_machine=$1 ;; @@ -287,7 +284,6 @@ case $basic_machine in | pdp10 | pdp11 | pj | pjl \ | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ | pyramid \ - | rx \ | score \ | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ | sh64 | sh64le \ @@ -295,14 +291,13 @@ case $basic_machine in | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ | spu | strongarm \ | tahoe | thumb | tic4x | tic80 | tron \ - | ubicom32 \ | v850 | v850e \ | we32k \ | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \ | z8k | z80) basic_machine=$basic_machine-unknown ;; - m6811 | m68hc11 | m6812 | m68hc12 | picochip) + m6811 | m68hc11 | m6812 | m68hc12) # Motorola 68HC11/12. basic_machine=$basic_machine-unknown os=-none @@ -345,7 +340,7 @@ case $basic_machine in | lm32-* \ | m32c-* | m32r-* | m32rle-* \ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ - | m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \ + | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ | mips16-* \ | mips64-* | mips64el-* \ @@ -373,7 +368,7 @@ case $basic_machine in | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ | pyramid-* \ - | romp-* | rs6000-* | rx-* \ + | romp-* | rs6000-* \ | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ @@ -382,7 +377,6 @@ case $basic_machine in | tahoe-* | thumb-* \ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* | tile-* \ | tron-* \ - | ubicom32-* \ | v850-* | v850e-* | vax-* \ | we32k-* \ | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \ @@ -732,9 +726,6 @@ case $basic_machine in basic_machine=ns32k-utek os=-sysv ;; - microblaze) - basic_machine=microblaze-xilinx - ;; mingw32) basic_machine=i386-pc os=-mingw32 @@ -1256,9 +1247,6 @@ case $os in # First match some system type aliases # that might get confused with valid system types. # -solaris* is a basic system type, with this one exception. - -auroraux) - os=-auroraux - ;; -solaris1 | -solaris1.*) os=`echo $os | sed -e 's|solaris1|sunos4|'` ;; @@ -1280,8 +1268,8 @@ case $os in # -sysv* is not here because it comes later, after sysvr4. -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ - | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \ - | -sym* | -kopensolaris* \ + | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ + | -kopensolaris* \ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ | -aos* | -aros* \ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ @@ -1302,7 +1290,7 @@ case $os in | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ - | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*) + | -skyos* | -haiku* | -rdos* | -toppers* | -drops*) # Remember, each alternative MUST END IN *, to match a version number. ;; -qnx*) --- plymouth-0.8.2.orig/build-tools/ltmain.sh +++ plymouth-0.8.2/build-tools/ltmain.sh @@ -1,6 +1,6 @@ # Generated from ltmain.m4sh. -# ltmain.sh (GNU libtool) 2.2.6 +# ltmain.sh (GNU libtool) 2.2.6b # Written by Gordon Matzigkeit , 1996 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc. @@ -65,7 +65,7 @@ # compiler: $LTCC # compiler flags: $LTCFLAGS # linker: $LD (gnu? $with_gnu_ld) -# $progname: (GNU libtool) 2.2.6 +# $progname: (GNU libtool) 2.2.6b Debian-2.2.6b-2ubuntu1 # automake: $automake_version # autoconf: $autoconf_version # @@ -73,9 +73,9 @@ PROGRAM=ltmain.sh PACKAGE=libtool -VERSION=2.2.6 +VERSION="2.2.6b Debian-2.2.6b-2ubuntu1" TIMESTAMP="" -package_revision=1.3012 +package_revision=1.3017 # Be Bourne compatible if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then @@ -5033,7 +5033,10 @@ func_mode_link () case $pass in dlopen) libs="$dlfiles" ;; dlpreopen) libs="$dlprefiles" ;; - link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; + link) + libs="$deplibs %DEPLIBS%" + test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" + ;; esac fi if test "$linkmode,$pass" = "lib,dlpreopen"; then @@ -5344,19 +5347,19 @@ func_mode_link () # It is a libtool convenience library, so add in its objects. convenience="$convenience $ladir/$objdir/$old_library" old_convenience="$old_convenience $ladir/$objdir/$old_library" + tmp_libs= + for deplib in $dependency_libs; do + deplibs="$deplib $deplibs" + if $opt_duplicate_deps ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + tmp_libs="$tmp_libs $deplib" + done elif test "$linkmode" != prog && test "$linkmode" != lib; then func_fatal_error "\`$lib' is not a convenience library" fi - tmp_libs= - for deplib in $dependency_libs; do - deplibs="$deplib $deplibs" - if $opt_duplicate_deps ; then - case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac - fi - tmp_libs="$tmp_libs $deplib" - done continue fi # $pass = conv @@ -5893,6 +5896,7 @@ func_mode_link () if test "$link_all_deplibs" != no; then # Add the search paths of all dependency libraries for deplib in $dependency_libs; do + path= case $deplib in -L*) path="$deplib" ;; *.la) @@ -6206,6 +6210,9 @@ func_mode_link () revision="$number_minor" lt_irix_increment=no ;; + *) + func_fatal_configuration "$modename: unknown library version type \`$version_type'" + ;; esac ;; no) --- plymouth-0.8.2.orig/images/Makefile.in +++ plymouth-0.8.2/images/Makefile.in @@ -138,6 +138,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PANGO_CFLAGS = @PANGO_CFLAGS@ PANGO_LIBS = @PANGO_LIBS@ --- plymouth-0.8.2.orig/themes/Makefile.am +++ plymouth-0.8.2/themes/Makefile.am @@ -1,2 +1,2 @@ -SUBDIRS = spinfinity fade-in text details solar glow script +SUBDIRS = spinfinity fade-in text details solar glow script ubuntu-logo ubuntu-text MAINTAINERCLEANFILES = Makefile.in --- plymouth-0.8.2.orig/themes/Makefile.in +++ plymouth-0.8.2/themes/Makefile.in @@ -154,6 +154,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PANGO_CFLAGS = @PANGO_CFLAGS@ PANGO_LIBS = @PANGO_LIBS@ @@ -233,7 +234,7 @@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ -SUBDIRS = spinfinity fade-in text details solar glow script +SUBDIRS = spinfinity fade-in text details solar glow script ubuntu-logo ubuntu-text MAINTAINERCLEANFILES = Makefile.in all: all-recursive --- plymouth-0.8.2.orig/themes/text/Makefile.in +++ plymouth-0.8.2/themes/text/Makefile.in @@ -139,6 +139,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PANGO_CFLAGS = @PANGO_CFLAGS@ PANGO_LIBS = @PANGO_LIBS@ --- plymouth-0.8.2.orig/themes/glow/Makefile.in +++ plymouth-0.8.2/themes/glow/Makefile.in @@ -139,6 +139,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PANGO_CFLAGS = @PANGO_CFLAGS@ PANGO_LIBS = @PANGO_LIBS@ --- /dev/null +++ plymouth-0.8.2/themes/ubuntu-text/Makefile.am @@ -0,0 +1,4 @@ +themedir = $(datadir)/plymouth/themes/ubuntu-text +dist_theme_DATA = ubuntu-text.plymouth + +MAINTAINERCLEANFILES = Makefile.in --- /dev/null +++ plymouth-0.8.2/themes/ubuntu-text/Makefile.in @@ -0,0 +1,437 @@ +# Makefile.in generated by automake 1.11.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +subdir = themes/ubuntu-text +DIST_COMMON = $(dist_theme_DATA) $(srcdir)/Makefile.am \ + $(srcdir)/Makefile.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ + $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +AM_V_GEN = $(am__v_GEN_$(V)) +am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) +am__v_GEN_0 = @echo " GEN " $@; +AM_V_at = $(am__v_at_$(V)) +am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) +am__v_at_0 = @ +SOURCES = +DIST_SOURCES = +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__installdirs = "$(DESTDIR)$(themedir)" +DATA = $(dist_theme_DATA) +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DRM_CFLAGS = @DRM_CFLAGS@ +DRM_LIBS = @DRM_LIBS@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GREP = @GREP@ +GTK_CFLAGS = @GTK_CFLAGS@ +GTK_LIBS = @GTK_LIBS@ +IMAGE_CFLAGS = @IMAGE_CFLAGS@ +IMAGE_LIBS = @IMAGE_LIBS@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +LT_AGE = @LT_AGE@ +LT_CURRENT = @LT_CURRENT@ +LT_REVISION = @LT_REVISION@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MKDIR_P = @MKDIR_P@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PANGO_CFLAGS = @PANGO_CFLAGS@ +PANGO_LIBS = @PANGO_LIBS@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PKG_CONFIG = @PKG_CONFIG@ +PLYMOUTH_CFLAGS = @PLYMOUTH_CFLAGS@ +PLYMOUTH_CONF_DIR = @PLYMOUTH_CONF_DIR@ +PLYMOUTH_DATADIR = @PLYMOUTH_DATADIR@ +PLYMOUTH_LIBDIR = @PLYMOUTH_LIBDIR@ +PLYMOUTH_LIBEXECDIR = @PLYMOUTH_LIBEXECDIR@ +PLYMOUTH_LIBS = @PLYMOUTH_LIBS@ +PLYMOUTH_PLUGIN_PATH = @PLYMOUTH_PLUGIN_PATH@ +PLYMOUTH_POLICY_DIR = @PLYMOUTH_POLICY_DIR@ +PLYMOUTH_THEME_PATH = @PLYMOUTH_THEME_PATH@ +RANLIB = @RANLIB@ +RELEASE_FILE = @RELEASE_FILE@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +VERSION = @VERSION@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +background_color = @background_color@ +background_end_color = @background_end_color@ +background_start_color = @background_start_color@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +logofile = @logofile@ +lt_ECHO = @lt_ECHO@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +plymouthclientdir = @plymouthclientdir@ +plymouthdaemondir = @plymouthdaemondir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +themedir = $(datadir)/plymouth/themes/ubuntu-text +dist_theme_DATA = ubuntu-text.plymouth +MAINTAINERCLEANFILES = Makefile.in +all: all-am + +.SUFFIXES: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu themes/ubuntu-text/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu themes/ubuntu-text/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs +install-dist_themeDATA: $(dist_theme_DATA) + @$(NORMAL_INSTALL) + test -z "$(themedir)" || $(MKDIR_P) "$(DESTDIR)$(themedir)" + @list='$(dist_theme_DATA)'; test -n "$(themedir)" || list=; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(themedir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(themedir)" || exit $$?; \ + done + +uninstall-dist_themeDATA: + @$(NORMAL_UNINSTALL) + @list='$(dist_theme_DATA)'; test -n "$(themedir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + test -n "$$files" || exit 0; \ + echo " ( cd '$(DESTDIR)$(themedir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(themedir)" && rm -f $$files +tags: TAGS +TAGS: + +ctags: CTAGS +CTAGS: + + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(DATA) +installdirs: + for dir in "$(DESTDIR)$(themedir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." + -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) +clean: clean-am + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-am + -rm -f Makefile +distclean-am: clean-am distclean-generic + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: install-dist_themeDATA + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-dist_themeDATA + +.MAKE: install-am install-strip + +.PHONY: all all-am check check-am clean clean-generic clean-libtool \ + distclean distclean-generic distclean-libtool distdir dvi \ + dvi-am html html-am info info-am install install-am \ + install-data install-data-am install-dist_themeDATA \ + install-dvi install-dvi-am install-exec install-exec-am \ + install-html install-html-am install-info install-info-am \ + install-man install-pdf install-pdf-am install-ps \ + install-ps-am install-strip installcheck installcheck-am \ + installdirs maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ + ps ps-am uninstall uninstall-am uninstall-dist_themeDATA + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: --- /dev/null +++ plymouth-0.8.2/themes/ubuntu-text/ubuntu-text.plymouth @@ -0,0 +1,4 @@ +[Plymouth Theme] +Name=Ubuntu Text +Description=Text mode theme based on ubuntu-logo theme +ModuleName=ubuntu-text --- plymouth-0.8.2.orig/themes/details/Makefile.in +++ plymouth-0.8.2/themes/details/Makefile.in @@ -139,6 +139,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PANGO_CFLAGS = @PANGO_CFLAGS@ PANGO_LIBS = @PANGO_LIBS@ --- plymouth-0.8.2.orig/themes/fade-in/Makefile.in +++ plymouth-0.8.2/themes/fade-in/Makefile.in @@ -139,6 +139,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PANGO_CFLAGS = @PANGO_CFLAGS@ PANGO_LIBS = @PANGO_LIBS@ --- /dev/null +++ plymouth-0.8.2/themes/ubuntu-logo/ubuntu-logo.script @@ -0,0 +1,1058 @@ +# ubuntu-logo.script - boot splash plugin +# +# Copyright (C) 2009 Canonical Ltd. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. +# +# Written by: Alberto Milone +# +# Based on the example provided with the "script plugin" written by: +# Charlie Brej +# + +# Set the text colour in (rgb / 256) +text_colour.red = 1.0; +text_colour.green = 1.0; +text_colour.blue = 1.0; + +# Tinted text #988592 +tinted_text_colour.red = 0.59; +tinted_text_colour.green = 0.52; +tinted_text_colour.blue = 0.57; + +# Action Text - #ffffff - RGB 255 255 255 +action_text_colour.red = 1.0; +action_text_colour.green = 1.0; +action_text_colour.blue = 1.0; + +# Orange - #ff4012 - RGB 255 64 18 +debugsprite = Sprite(); +debugsprite_bottom = Sprite(); +debugsprite_medium = Sprite(); + +# are we currently prompting for a password? +prompt_active = 0; + +# General purpose function to create text +fun WriteText (text, colour) { + image = Image.Text (text, colour.red, colour.green, colour.blue); + return image; +} + +fun ImageToText (text) { + image = WriteText (text, text_colour); + return image; +} + +fun ImageToTintedText (text) { + image = WriteText (text, tinted_text_colour); + return image; +} + +fun ImageToActionText (text) { + image = WriteText (text, action_text_colour); + return image; +} + +fun Debug(text) { + debugsprite.SetImage(ImageToText (text)); +} + +fun DebugBottom(text) { + debugsprite_bottom.SetImage(ImageToText (text)); + debugsprite_bottom.SetPosition(0, (Window.GetHeight (0) - 20), 1); +} + +fun DebugMedium(text) { + debugsprite_medium.SetImage(ImageToText (text)); + debugsprite_medium.SetPosition(0, (Window.GetHeight (0) - 60), 1); +} + +fun TextYOffset() { + local.y; + local.text_height; + local.min_height; + + # Put the 1st line below the logo + some spacing + y = logo.y + logo.height + (progress_indicator.bullet_height * 7 ); # + logo_spacing; + + text_height = first_line_height * 7.5; + + min_height = Window.GetHeight(); + if (y + text_height > min_height) + y = min_height - text_height; + + if (y < progress_indicator.y + progress_indicator.height) + return progress_indicator.y + progress_indicator.height; + return y; +} + +#------------------------------String functions------------------------------- + +# This is the equivalent for strstr() +fun StringString(string, substring) { + start = 0; + while (String(string).CharAt (start)) { + walk = 0; + while (String(substring).CharAt (walk) == String(string).CharAt (start + walk) ) { + walk++; + if (!String(substring).CharAt (walk)) return start; + } + start++; + } + + return NULL; +} + +fun StringLength (string) { + index = 0; + while (String(string).CharAt(index)) index++; + return index; +} + +fun StringCopy (source, beginning, end) { + local.destination = ""; + for (index = beginning; ( ( (end == NULL) || (index <= end) ) && (String(source).CharAt(index)) ); index++) { + local.destination += String(source).CharAt(index); + } + + return local.destination; +} + +fun StringReplace (source, pattern, replacement) { + local.found = StringString(source, pattern); + if (local.found == NULL) + return source; + + local.new_string = StringCopy (source, 0, local.found - 1) + + replacement + + StringCopy (source, local.found + StringLength(pattern), NULL); + + return local.new_string; +} + +# it makes sense to use it only for +# numbers up to 100 +fun StringToInteger (str) { + int = -1; + for (i=0; i<=100; i++) { + if (i+"" == str) { + int = i; + break; + } + } + return int; +} + +#----------------------------------------------------------------------------- +# Previous background colour +# #300a24 --> 0.19, 0.04, 0.14 +# New background colour +# #2c001e --> 0.16, 0.00, 0.12 +# +Window.SetBackgroundTopColor (0.16, 0.00, 0.12); # Nice colour on top of the screen fading to +Window.SetBackgroundBottomColor (0.16, 0.00, 0.12); # an equally nice colour on the bottom + +bits_per_pixel = Window.GetBitsPerPixel (); +if (bits_per_pixel == 4) { + logo_filename = "ubuntu_logo16.png"; + progress_dot_off_filename = "progress_dot_off16.png"; + progress_dot_on_filename = "progress_dot_on16.png"; + password_field_filename = "password_field16.png"; +} else { + logo_filename = "ubuntu_logo.png"; + progress_dot_off_filename = "progress_dot_off.png"; + progress_dot_on_filename = "progress_dot_on.png"; + password_field_filename = "password_field.png"; +} + +logo.image = Image (logo_filename); +logo.sprite = Sprite (); +logo.sprite.SetImage (logo.image); +logo.width = logo.image.GetWidth (); +logo.height = logo.image.GetHeight (); +logo.x = Window.GetX () + Window.GetWidth () / 2 - logo.width / 2; +logo.y = Window.GetY () + Window.GetHeight () / 2 - logo.height; +logo.z = 1000; +logo.sprite.SetX (logo.x); +logo.sprite.SetY (logo.y); +logo.sprite.SetZ (logo.z); +logo.sprite.SetOpacity (1); + +# Spacing below the logo - in pixels +logo_spacing = logo.height * 4; + +message_notification[0].image = ImageToTintedText (""); +message_notification[1].image = ImageToTintedText (""); +fsck_notification.image = ImageToActionText (""); + +status = "normal"; + +progress_indicator.bullet_off = Image (progress_dot_off_filename); +progress_indicator.bullet_on = Image (progress_dot_on_filename); +progress_indicator.bullet_width = progress_indicator.bullet_off.GetWidth (); +progress_indicator.bullet_height = progress_indicator.bullet_off.GetHeight (); +progress_indicator.bullet_hspacing = progress_indicator.bullet_width * 1.1; +progress_indicator.width = progress_indicator.bullet_width * 5; +progress_indicator.height = progress_indicator.bullet_height; +progress_indicator.y = logo.y + logo.height + (logo.height / 4); +progress_indicator.x = Window.GetX () + Window.GetWidth () / 2 - progress_indicator.width / 2; # logo.x + 26; + +# use a fixed string with ascending and descending stems to calibrate the +# bounding box for the first message, so the messages below don't move up +# and down according to *their* height. +first_line_height = ImageToTintedText ("AfpqtM").GetHeight(); + +# if the user has a 640x480 or 800x600 display, we can't quite fit everything +# (including passphrase prompts) with the target spacing, so scoot the text up +# a bit if needed. +top_of_the_text = TextYOffset(); + +#-----------------------------------------Logo functions------------------------------ + +# Call this when updating the screen +fun draw_logo () { + logo.sprite.SetX (logo.x); + logo.sprite.SetY (logo.y); + logo.sprite.SetZ (logo.z); + logo.sprite.SetOpacity (1); +} + + +#-----------------------------------------Progress Indicator-------------------------- +fun set_progress_indicator () { + + + # Here we assume that we can store half bullets on each half of the screen + # together with some spacing + local.x = progress_indicator.x; + + for (index = 0; index <= 4; index++) { + # Set the "off" bullets + progress_indicator.bullets_off[index].sprite = Sprite (progress_indicator.bullet_off); + progress_indicator.bullets_off[index].sprite.SetPosition (local.x, progress_indicator.y, 1000); + progress_indicator.bullets_off[index].x = local.x; + progress_indicator.bullets_off[index].y = progress_indicator.y; + progress_indicator.bullets_off[index].sprite.SetOpacity (1); + + #local.debug_medium_string = "Progress indicator " + index + ": x = " + progress_indicator.bullets_off[index].x + + # ", y = " + progress_indicator.bullets_off[index].y + ", logo width = " + logo.width + + # ", logo height = " + logo.height + " " + screen_width + " " + screen_height; + # + #(index % 2) && DebugMedium (local.debug_medium_string) || DebugBottom (local.debug_medium_string); + + # Set the "on" bullets on top of the "off" bullets and make them transparent + progress_indicator.bullets_on[index].sprite = Sprite (progress_indicator.bullet_on); + progress_indicator.bullets_on[index].x = progress_indicator.bullets_off[index].x; + progress_indicator.bullets_on[index].y = progress_indicator.bullets_off[index].y; + progress_indicator.bullets_on[index].sprite.SetPosition (progress_indicator.bullets_on[index].x, progress_indicator.bullets_on[index].y, 10000); + + progress_indicator.bullets_on[index].sprite.SetOpacity (0); + + local.x += progress_indicator.bullet_hspacing; + } + #local.debug_string = "Progress indicator: x1 = " + progress_indicator.x + ", x2 = " + local.x + ", y = " + progress_indicator.y + + # ", x logo = " + logo.x + ", y logo = " + logo.y + ", indicator width = " + progress_indicator.width; + #Debug(progress_indicator.bullets_off[0].x); +} + + +# We have 2 bullets, one on top of the other: +# The white one is on top of the red one and the former should +# slowly fade so as to get a nice transition effect. +fun switch_on_bullet (bullets_off, bullets_on, bullet_number, opacity) { + local.x = bullets_on[bullet_number].x; + local.y = bullets_on[bullet_number].y; + local.z = bullets_on[bullet_number].z; + + # Hide the bullets which are off + bullets_off[bullet_number].sprite.SetOpacity (0); + + # Show the bullets which are on + bullets_on[bullet_number].sprite.SetPosition (local.x, local.y, local.z); + bullets_on[bullet_number].sprite.SetOpacity (opacity); + + # Bump the number of times we have switched on bullets + global.times_bullets_switched++; +} + +fun switch_off_bullets () { + # Debug("Switching off progress indicator"); + + set_progress_indicator (); + global.times_bullets_switched = 0; + global.on_off = 1; +} + +# This is something that we can call when we exit +fun switch_on_bullets () { + # Debug("Switching off progress indicator"); + if (!global.progress_indicator.bullets_on) set_progress_indicator (); + local = global.progress_indicator; + + for (index = 0; bullets_on[index]; index++) { + switch_on_bullet (bullets_off, bullets_on, index, 1.0); + } +} + + +# Implement in boot progress callback +fun animate_progress_indicator (progress, time) { + if (global.progress_time == NULL) { + global.progress_time = progress; #time; + switch_off_bullets (); + } + +# Debug ("progress = " + progress + ", time = " + time + " times switched = " + global.times_bullets_switched + " on_off " + global.on_off); + +# if (global.times_bullets_switched == NULL) +# global.times_bullets_switched = 5; + +# if (global.on_off == NULL) +# global.on_off = 0; + + if ((progress - global.progress_time) >= 1.0) { + global.progress_time = progress; + + if (global.times_bullets_switched == 5) { + # Change which bullets are switched on + # and which ones are switched off + global.on_off = !global.on_off; + global.times_bullets_switched = 0; + } + + if (global.on_off) { + switch_on_bullet (progress_indicator.bullets_off, progress_indicator.bullets_on, + global.times_bullets_switched, 1.0); + } + else { + switch_on_bullet (progress_indicator.bullets_on, progress_indicator.bullets_off, + global.times_bullets_switched, 1.0); + } + } + + + # Start setting bullets to "on" with translucency +# for (index = 0; index <= 5; index++) { +# opacity = 0.0; +# while (opacity <= 1.0) { +# switch_on_bullet (progress_indicator.bullets_off, progress_indicator.bullets_on, +# index, opacity); +# opacity += 0.1; +# } +# } +} + + +#-----------------------------------------Label utility functions--------------------- + +# label should be either a string or NULL +# Images for n lines will be created and returned as items of the +# message_label array +# +fun get_message_label (label, is_fake, is_action_line) { + # Debug("Get Label position"); + local.message_label; + + if (is_fake) + # Create a fake label so as to get the y coordinate of + # a standard-length label. + local.message_image = ImageToTintedText ("This is a fake message"); + else + local.message_image = (is_action_line) && ImageToActionText (label) || ImageToTintedText (label); + + message_label.width = message_image.GetWidth (); + message_label.height = message_image.GetHeight (); + + # Center the line horizontally + message_label.x = Window.GetX () + Window.GetWidth () / 2 - message_label.width / 2; + + message_label.y = top_of_the_text; + + # Put the 2nd line below the fsck line + if (is_action_line) { + local.fsck_label.y = message_label.y + (first_line_height + first_line_height / 2); + message_label.y = local.fsck_label.y + (first_line_height * 2); + } + + # Debug("action label x = " + message_label.x + " y = " + message_label.y ); + +# message_debug = "msg_x = " + message_label.x + " msg_y = " + message_label.y + +# "msg_width = " + message_label.width + " msg_height = " + +# message_label.height + " message = " + label; +# Debug(message_debug); + + return message_label; + +} + +# Create an fsck label and/or get its position +fun get_fsck_label (label, is_fake) { + # Debug("Get Label position"); + local.fsck_label = global.progress_label; + + if (is_fake) + fsck_label.image = ImageToTintedText ("This is a fake message"); + else + fsck_label.image = ImageToTintedText (label); + + fsck_label.width = fsck_label.image.GetWidth (); + fsck_label.height = fsck_label.image.GetHeight (); + + # Centre the label horizontally + fsck_label.x = Window.GetX () + Window.GetWidth () / 2 - fsck_label.width / 2; + + local.first_label = get_message_label (label, 1, 0); + + # Place the label below the 1st message line + fsck_label.y = local.first_label.y + local.first_label.height + (local.first_label.height / 2); + +# message_debug = "msg_x = " + fsck_label.x + " msg_y = " + fsck_label.y + +# "msg_width = " + fsck_label.width + " msg_height = " + +# fsck_label.height + " message = " + label; +# Debug(message_debug); + + return fsck_label; +} + +#-----------------------------------------Message stuff -------------------------------- +# + +# Set up a message label +# +# NOTE: this is called when doing something like 'plymouth message "hello world"' +# +fun setup_message (message_text, x, y, z, index) { + # Debug("Message setup"); + global.message_notification[index].image = (index) && ImageToActionText (message_text) || ImageToTintedText (message_text); + + # Set up the text message, if any + message_notification[index].x = x; + message_notification[index].y = y; + message_notification[index].z = z; + + message_notification[index].sprite = Sprite (); + message_notification[index].sprite.SetImage (message_notification[index].image); + message_notification[index].sprite.SetX (message_notification[index].x); + message_notification[index].sprite.SetY (message_notification[index].y); + message_notification[index].sprite.SetZ (message_notification[index].z); + +} + +fun show_message (index) { + if (global.message_notification[index].sprite) global.message_notification[index].sprite.SetOpacity(1); +} + +fun hide_message (index) { + if (global.message_notification[index].sprite) global.message_notification[index].sprite.SetOpacity(0); +} + + + + +# the callback function is called when new message should be displayed. +# First arg is message to display. +fun message_callback (message) +{ + # Debug("Message callback"); + is_fake = 0; + if (!message || (message == "")) is_fake = 1; + + local.substring = "keys:"; + + # Look for the "keys:" prefix + local.keys = StringString(message, local.substring); + + local.is_action_line = (keys != NULL); + #Debug("keys " + local.keys + " substring length = " + StringLength(local.substring)); + + # Get the message without the "keys:" prefix + if (keys != NULL) + message = StringCopy (message, keys + StringLength(local.substring), NULL); + + local.label.is_fake = is_fake; + label = get_message_label(message, is_fake, is_action_line); + label.z = 10000; + + setup_message (message, label.x, label.y, label.z, is_action_line); + if (prompt_active && local.is_action_line) + hide_message (is_action_line); + else + show_message (is_action_line); + +} + + +#-----------------------------------------Display Password stuff ----------------------- +# + +fun password_dialogue_setup (message_label) { + # Debug("Password dialog setup"); + + local.entry; + local.bullet_image; + + bullet_image = Image (progress_dot_off_filename); + entry.image = Image (password_field_filename); + + # Hide the normal labels + prompt_active = 1; + if (message_notification[1].sprite) hide_message (1); + + # Set the prompt label + label = get_message_label(message_label, 0, 1); + label.z = 10000; + + setup_message (message_label, label.x, label.y, label.z, 2); + show_message (2); + + # Set up the text entry which contains the bullets + entry.sprite = Sprite (); + entry.sprite.SetImage (entry.image); + + # Centre the box horizontally + entry.x = Window.GetX () + Window.GetWidth () / 2 - entry.image.GetWidth () / 2; + + # Put the entry below the second label. + entry.y = message_notification[2].y + label.height; + + #Debug ("entry x = " + entry.x + ", y = " + entry.y); + entry.z = 10000; + entry.sprite.SetX (entry.x); + entry.sprite.SetY (entry.y); + entry.sprite.SetZ (entry.z); + + global.password_dialogue = local; +} + +fun password_dialogue_opacity (opacity) { + # Debug("Password dialog opacity"); + global.password_dialogue.opacity = opacity; + local = global.password_dialogue; + + # You can make the box translucent with a float + # entry.sprite.SetOpacity (0.3); + entry.sprite.SetOpacity (opacity); + label.sprite.SetOpacity (opacity); + + if (bullets) { + for (index = 0; bullets[index]; index++) { + bullets[index].sprite.SetOpacity (opacity); + } + } +} + + +# The callback function is called when the display should display a password dialogue. +# First arg is prompt string, the second is the number of bullets. +fun display_password_callback (prompt, bullets) { + # Debug("Password dialog setup"); + + global.status = "password"; + if (!global.password_dialogue) password_dialogue_setup(prompt); + password_dialogue_opacity (1); + bullet_width = password_dialogue.bullet_image.GetWidth(); + bullet_y = password_dialogue.entry.y + + password_dialogue.entry.image.GetHeight () / 2 - + password_dialogue.bullet_image.GetHeight () / 2; + margin = bullet_width; + spaces = Math.Int( (password_dialogue.entry.image.GetWidth () - (margin * 2)) / (bullet_width / 2 ) ); + #Debug ("spaces = " + spaces + ", bullets = " + bullets); + bullets_area.width = margin + spaces * (bullet_width / 2); + bullets_area.x = Window.GetX () + Window.GetWidth () / 2 - bullets_area.width / 2; + #DebugBottom ("pwd_entry x = " + password_dialogue.entry.x + ", bullets_area.x = " + bullets_area.x + ", bullets_area.width = " + bullets_area.width); + if (bullets > spaces) + bullets = spaces; + for (index = 0; password_dialogue.bullets[index] || index < bullets; index++){ + if (!password_dialogue.bullets[index]) { + password_dialogue.bullets[index].sprite = Sprite (); + password_dialogue.bullets[index].sprite.SetImage (password_dialogue.bullet_image); + password_dialogue.bullets[index].x = bullets_area.x + # password_dialogue.entry.x + margin + + index * bullet_width / 2; + password_dialogue.bullets[index].sprite.SetX (password_dialogue.bullets[index].x); + password_dialogue.bullets[index].y = bullet_y; + password_dialogue.bullets[index].sprite.SetY (password_dialogue.bullets[index].y); + password_dialogue.bullets[index].z = password_dialogue.entry.z + 1; + password_dialogue.bullets[index].sprite.SetZ (password_dialogue.bullets[index].z); + } + + password_dialogue.bullets[index].sprite.SetOpacity (0); + + if (index < bullets) { + password_dialogue.bullets[index].sprite.SetOpacity (1); + } + } +} + +Plymouth.SetDisplayPasswordFunction (display_password_callback); + +Plymouth.SetMessageFunction (message_callback); + +Plymouth.SetBootProgressFunction (animate_progress_indicator); + +# Plymouth.SetBootProgressFunction: the callback function is called with two numbers, the progress (between 0 and 1) and the time spent booting so far +# Plymouth.SetRootMountedFunction: the callback function is called when a new root is mounted +# Plymouth.SetKeyboardInputFunction: the callback function is called with a string containing a new character entered on the keyboard + +#----------------------------------------- FSCK Counter -------------------------------- + +# Initialise the counter +fun init_fsck_count () { + # The number of fsck checks in this cycle + global.counter.total = 0; + # The number of fsck checks already performed + the current one + global.counter.current = 1; + # The previous fsck + global.counter.last = 0; +} + +# Increase the total counter +fun increase_fsck_count () { + global.counter.total++; +} + +fun increase_current_fsck_count () { + global.counter.last = global.counter.current++; +} + +# Clear the counter +fun clear_fsck_count () { + global.counter = NULL; + init_fsck_count (); +} + +#----------------------------------------- Progress Label ------------------------------ + + +# Change the opacity level of a progress label +# +# opacity = 1 -> show +# opacity = 0 -> hide +# opacity = 0.3 (or any other float) -> translucent +# +fun set_progress_label_opacity (opacity) { + # the label + progress_label.sprite.SetOpacity (opacity); + + # Make the slot available again when hiding the bar + # So that another bar can take its place + if (opacity == 0) { + progress_label.is_available = 1; + progress_label.device = ""; + } +} + +# Set up a new Progress Bar +# +# TODO: Make it possible to reuse (rather than recreate) a bar +# if .is_available = 1. Ideally this would just reset the +# label, the associated +# device and the image size of the sprite. + +fun init_progress_label (device, status_string) { + # Make the slot unavailable + global.progress_label.is_available = 0; + progress_label.progress = 0; + progress_label.device = device; + progress_label.status_string = status_string; +} + +# See if the progress label is keeping track of the fsck +# of "device" +# +fun device_has_progress_label (device) { + #DebugBottom ("label device = " + progress_label.device + " checking device " + device); + return (progress_label.device == device); +} + +# Update the Progress bar which corresponds to index +# +fun update_progress_label (progress) { + # If progress is NULL then we just refresh the label. + # This happens when only counter.total has changed. + if (progress != NULL) { + progress_label.progress = progress; + + #Debug("device " + progress_label.device + " progress " + progress); + + # If progress >= 100% hide the label and make it available again + if (progress >= 100) { + set_progress_label_opacity (0); + + # See if we any other fsck check is complete + # and, if so, hide the progress bars and the labels + on_fsck_completed (); + + return 0; + } + } + # Update progress label here + # + # FIXME: the queue logic from this theme should really be moved into mountall + # instead of using string replacement to deal with localised strings. + label = StringReplace (progress_label.status_string[0], "%1$d", global.counter.current); + label = StringReplace (label, "%2$d", global.counter.total); + label = StringReplace (label, "%3$d", progress_label.progress); + label = StringReplace (label, "%%", "%"); + + progress_label = get_fsck_label (label, 0); + #progress_label.progress = progress; + + progress_label.sprite = Sprite (progress_label.image); + + # Set up the bar + progress_label.sprite.SetPosition(progress_label.x, progress_label.y, 1); + + set_progress_label_opacity (1); + +} + +# Refresh the label so as to update counters +fun refresh_progress_label () { + update_progress_label (NULL); +} + +#----------------------------------------- FSCK Queue ---------------------------------- + +# Initialise the fsck queue +fun init_queue () { + global.fsck_queue[0].device; + global.fsck_queue[0].progress; + global.fsck_queue.counter = 0; + global.fsck_queue.biggest_item = 0; +} + +fun clear_queue () { + global.fsck_queue = NULL; + init_queue (); +} + +# Return either the device index in the queue or -1 +fun queue_look_up_by_device (device) { + for (i=0; i <= fsck_queue.biggest_item; i++) { + if ((fsck_queue[i]) && (fsck_queue[i].device == device)) + return i; + } + return -1; +} + +# Keep track of an fsck process in the queue +fun add_fsck_to_queue (device, progress) { + # Look for an empty slot in the queue + for (i=0; global.fsck_queue[i].device; i++) { + continue; + } + local.index = i; + + # Set device and progress + global.fsck_queue[local.index].device = device; + global.fsck_queue[local.index].progress = progress; + + # Increase the queue counter + global.fsck_queue.counter++; + + # Update the max index of the array for iterations + if (local.index > global.fsck_queue.biggest_item) + global.fsck_queue.biggest_item = local.index; + + #DebugMedium ("Adding " + device + " at " + local.index); +} + +fun is_queue_empty () { + return (fsck_queue.counter == 0); +} + +fun is_progress_label_available () { + return (progress_label.is_available == 1); +} + + +# This should cover the case in which the fsck checks in +# the queue are completed before the ones showed in the +# progress label +fun on_queued_fsck_completed () { + if (!is_queue_empty ()) + return; + + # Hide the extra label, if any + #if (progress_bar.extra_label.sprite) + # progress_bar.extra_label.sprite.SetOpacity(0); +} + +fun remove_fsck_from_queue (index) { + # Free memory which was previously allocated for + # device and progress + global.fsck_queue[index].device = NULL; + global.fsck_queue[index].progress = NULL; + + # Decrease the queue counter + global.fsck_queue.counter--; + + # See if there are other processes in the queue + # if not, clear the extra_label + on_queued_fsck_completed (); +} + +fun on_fsck_completed () { + # We have moved on to tracking the next fsck + increase_current_fsck_count (); + + if (!is_progress_label_available ()) + return; + + if (!is_queue_empty ()) + return; + + # Hide the progress label + if (progress_label.sprite) + progress_label.sprite.SetOpacity (0); + + # Clear the queue + clear_queue (); + + # Clear the fsck counter + clear_fsck_count (); +} + +# Update an fsck process that we keep track of in the queue +fun update_progress_in_queue (index, device, progress) { + # If the fsck is complete, remove it from the queue + if (progress >= 100) { + remove_fsck_from_queue (index); + on_queued_fsck_completed (); + return; + } + + global.fsck_queue[index].device = device; + global.fsck_queue[index].progress = progress; + +} + +# TODO: Move it to some function +# Create an empty queue +#init_queue (); + + +#----------------------------------------- FSCK Functions ------------------------------ + + +# Either add a new bar for fsck checks or update an existing bar +# +# NOTE: no more than "progress_bar.max_number" bars are allowed +# +fun fsck_check (device, progress, status_string) { + + # The 1st time this will take place + if (!global.progress_label) { + # Increase the fsck counter + increase_fsck_count (); + + # Set up a new label for the check + init_progress_label (device, status_string); + update_progress_label (progress); + + return; + } + + + if (device_has_progress_label (device)) { + # Update the progress of the existing label + update_progress_label (progress); + } + else { + # See if there's already a slot in the queue for the device + local.queue_device_index = queue_look_up_by_device(device); + + # See if the progress_label is available + if (progress_label.is_available) { + +# local.my_string = "available index " + local.available_index + " progress_bar counter is " + progress_bar.counter; +# Debug(local.my_string); + + + # If the fsck check for the device was in the queue, then + # remove it from the queue + if (local.queue_device_index >= 0) { + remove_fsck_from_queue (index); + } + else { + # Increase the fsck counter + increase_fsck_count (); + } + +# local.my_string += local.message; + #Debug("setting new label for device " + device + " progress " + progress); + + # Set up a new label for the check + init_progress_label (device, status_string); + update_progress_label (progress); + + } + # If the progress_label is not available + else { + + # If the fsck check for the device is already in the queue + # just update its progress in the queue + if (local.queue_device_index >= 0) { + #DebugMedium("Updating queue at " + local.queue_device_index + " for device " + device); + update_progress_in_queue (local.queue_device_index, device, progress); + } + # Otherwise add the check to the queue + else { + #DebugMedium("Adding device " + device + " to queue at " + local.queue_device_index); + add_fsck_to_queue (device, progress); + + # Increase the fsck counter + increase_fsck_count (); + + refresh_progress_label (); + } + + } + } + +# if (!is_queue_empty ()) { +# DebugBottom("Extra label for "+ device); + #} +# else { +# DebugBottom("No extra label for " + device + ". 1st Device in the queue "+ fsck_queue[0].device + " counter = " + global.fsck_queue.counter); +# } +} + + +#-----------------------------------------Update Status stuff -------------------------- +# +# The update_status_callback is what we can use to pass plymouth whatever we want so +# as to make use of features which are available only in this program (as opposed to +# being available for any theme for the script plugin). +# +# Example: +# +# Thanks to the current implementation, some scripts can call "plymouth --update=fsck:sda1:40" +# and this program will know that 1) we're performing and fsck check, 2) we're checking sda1, +# 3) the program should set the label progress to 40% +# +# Other features can be easily added by parsing the string that we pass plymouth with "--update" +# +fun update_status_callback (status) { +# Debug(status); + if (!status) return; + + string_it = 0; + update_strings[string_it] = ""; + + for (i=0; (String(status).CharAt(i) != ""); i++) { + local.temp_char = String(status).CharAt(i); + if (temp_char != ":") + update_strings[string_it] += temp_char; + else + update_strings[++string_it] = ""; + } + +# my_string = update_strings[0] + " " + update_strings[1] + " " + update_strings[2]; +# Debug(my_string); + # Let's assume that we're dealing with these strings fsck:sda1:40 + if ((string_it >= 2) && (update_strings[0] == "fsck")) { + + device = update_strings[1]; + progress = update_strings[2]; + status_string[0] = update_strings[3]; # "Checking disk %1$d of %2$d (%3$d %% complete)" + if (!status_string[0]) + status_string[0] = "Checking disk %1$d of %2$d (%3$d %% complete)"; + + if ((device != "") && (progress != "")) { + progress = StringToInteger (progress); + + # Make sure that the fsck_queue is initialised + if (!global.fsck_queue) + init_queue (); + + # Make sure that the fsck counter is initialised + if (!global.counter) + init_fsck_count (); + +# if (!global.progress_bar.extra_label.sprite) +# create_extra_fsck_label (); + + # Keep track of the fsck check + fsck_check (device, progress, status_string); + } + + } + +} +Plymouth.SetUpdateStatusFunction (update_status_callback); + +#-----------------------------------------Display Question stuff ----------------------- +# +# TODO: Implement this if needed +# +# The callback function is called when the display should display a question dialogue. +# First arg is prompt string, the second is the entry contents. +#fun display_question_callback (prompt_string, entry_contents) +#{ +# time++; +#} +# +#Plymouth.SetDisplayQuestionFunction (display_question_callback); + +#-----------------------------------------Refresh stuff -------------------------------- +# +# Calling Plymouth.SetRefreshFunction with a function will set that function to be +# called up to 50 times every second, e.g. +# +# NOTE: if a refresh function is not set, Plymouth doesn't seem to be able to update +# the screen correctly +# +fun refresh_callback () +{ + draw_logo (); +} +Plymouth.SetRefreshFunction (refresh_callback); + + +#-----------------------------------------Display Normal stuff ----------------------- +# +# The callback function is called when the display should return to normal +fun display_normal_callback () +{ + global.status = "normal"; + if (global.password_dialogue) { + password_dialogue_opacity (0); + global.password_dialogue = NULL; + if (message_notification[2].sprite) hide_message(2); + prompt_active = 0; + } + + if (message_notification[1].sprite) show_message (1); + + +} + +Plymouth.SetDisplayNormalFunction (display_normal_callback); + + +#----------------------------------------- Quit -------------------------------- + +# TODO: Maybe we should also hide any other dialog +# Show the logo and make the progress indicator look full when on exit +fun quit_callback () +{ + logo.sprite.SetOpacity (1); + switch_on_bullets (); +} + +Plymouth.SetQuitFunction(quit_callback); --- /dev/null +++ plymouth-0.8.2/themes/ubuntu-logo/ubuntu-logo.plymouth.in @@ -0,0 +1,8 @@ +[Plymouth Theme] +Name=Ubuntu Logo +Description=A theme that features a blank background with a logo. +ModuleName=script + +[script] +ImageDir=@PLYMOUTH_THEME_PATH@/ubuntu-logo +ScriptFile=@PLYMOUTH_THEME_PATH@/ubuntu-logo/ubuntu-logo.script --- /dev/null +++ plymouth-0.8.2/themes/ubuntu-logo/Makefile.am @@ -0,0 +1,22 @@ +themedir = $(datadir)/plymouth/themes/ubuntu-logo +nodist_theme_DATA = ubuntu-logo.plymouth +dist_theme_DATA = ubuntu-logo.script \ + ubuntu_logo.png \ + ubuntu_logo16.png \ + password_field.png \ + password_field16.png \ + progress_dot_off.png \ + progress_dot_off16.png \ + progress_dot_on.png \ + progress_dot_on16.png + + + +MAINTAINERCLEANFILES = Makefile.in ubuntu-logo.plymouth +CLEANFILES = ubuntu-logo.plymouth + +ubuntu-logo.plymouth: $(srcdir)/ubuntu-logo.plymouth.in + sed -e 's,[@]PLYMOUTH_THEME_PATH[@],$(PLYMOUTH_THEME_PATH),g' \ + $(srcdir)/ubuntu-logo.plymouth.in > ubuntu-logo.plymouth + +EXTRA_DIST = ubuntu-logo.plymouth.in --- /dev/null +++ plymouth-0.8.2/themes/ubuntu-logo/Makefile.in @@ -0,0 +1,475 @@ +# Makefile.in generated by automake 1.11.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +subdir = themes/ubuntu-logo +DIST_COMMON = $(dist_theme_DATA) $(srcdir)/Makefile.am \ + $(srcdir)/Makefile.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ + $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +AM_V_GEN = $(am__v_GEN_$(V)) +am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) +am__v_GEN_0 = @echo " GEN " $@; +AM_V_at = $(am__v_at_$(V)) +am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) +am__v_at_0 = @ +SOURCES = +DIST_SOURCES = +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__installdirs = "$(DESTDIR)$(themedir)" "$(DESTDIR)$(themedir)" +DATA = $(dist_theme_DATA) $(nodist_theme_DATA) +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DRM_CFLAGS = @DRM_CFLAGS@ +DRM_LIBS = @DRM_LIBS@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GREP = @GREP@ +GTK_CFLAGS = @GTK_CFLAGS@ +GTK_LIBS = @GTK_LIBS@ +IMAGE_CFLAGS = @IMAGE_CFLAGS@ +IMAGE_LIBS = @IMAGE_LIBS@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +LT_AGE = @LT_AGE@ +LT_CURRENT = @LT_CURRENT@ +LT_REVISION = @LT_REVISION@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MKDIR_P = @MKDIR_P@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PANGO_CFLAGS = @PANGO_CFLAGS@ +PANGO_LIBS = @PANGO_LIBS@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PKG_CONFIG = @PKG_CONFIG@ +PLYMOUTH_CFLAGS = @PLYMOUTH_CFLAGS@ +PLYMOUTH_CONF_DIR = @PLYMOUTH_CONF_DIR@ +PLYMOUTH_DATADIR = @PLYMOUTH_DATADIR@ +PLYMOUTH_LIBDIR = @PLYMOUTH_LIBDIR@ +PLYMOUTH_LIBEXECDIR = @PLYMOUTH_LIBEXECDIR@ +PLYMOUTH_LIBS = @PLYMOUTH_LIBS@ +PLYMOUTH_PLUGIN_PATH = @PLYMOUTH_PLUGIN_PATH@ +PLYMOUTH_POLICY_DIR = @PLYMOUTH_POLICY_DIR@ +PLYMOUTH_THEME_PATH = @PLYMOUTH_THEME_PATH@ +RANLIB = @RANLIB@ +RELEASE_FILE = @RELEASE_FILE@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +VERSION = @VERSION@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +background_color = @background_color@ +background_end_color = @background_end_color@ +background_start_color = @background_start_color@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +logofile = @logofile@ +lt_ECHO = @lt_ECHO@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +plymouthclientdir = @plymouthclientdir@ +plymouthdaemondir = @plymouthdaemondir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +themedir = $(datadir)/plymouth/themes/ubuntu-logo +nodist_theme_DATA = ubuntu-logo.plymouth +dist_theme_DATA = ubuntu-logo.script \ + ubuntu_logo.png \ + ubuntu_logo16.png \ + password_field.png \ + password_field16.png \ + progress_dot_off.png \ + progress_dot_off16.png \ + progress_dot_on.png \ + progress_dot_on16.png + +MAINTAINERCLEANFILES = Makefile.in ubuntu-logo.plymouth +CLEANFILES = ubuntu-logo.plymouth +EXTRA_DIST = ubuntu-logo.plymouth.in +all: all-am + +.SUFFIXES: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu themes/ubuntu-logo/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu themes/ubuntu-logo/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs +install-dist_themeDATA: $(dist_theme_DATA) + @$(NORMAL_INSTALL) + test -z "$(themedir)" || $(MKDIR_P) "$(DESTDIR)$(themedir)" + @list='$(dist_theme_DATA)'; test -n "$(themedir)" || list=; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(themedir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(themedir)" || exit $$?; \ + done + +uninstall-dist_themeDATA: + @$(NORMAL_UNINSTALL) + @list='$(dist_theme_DATA)'; test -n "$(themedir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + test -n "$$files" || exit 0; \ + echo " ( cd '$(DESTDIR)$(themedir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(themedir)" && rm -f $$files +install-nodist_themeDATA: $(nodist_theme_DATA) + @$(NORMAL_INSTALL) + test -z "$(themedir)" || $(MKDIR_P) "$(DESTDIR)$(themedir)" + @list='$(nodist_theme_DATA)'; test -n "$(themedir)" || list=; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(themedir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(themedir)" || exit $$?; \ + done + +uninstall-nodist_themeDATA: + @$(NORMAL_UNINSTALL) + @list='$(nodist_theme_DATA)'; test -n "$(themedir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + test -n "$$files" || exit 0; \ + echo " ( cd '$(DESTDIR)$(themedir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(themedir)" && rm -f $$files +tags: TAGS +TAGS: + +ctags: CTAGS +CTAGS: + + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(DATA) +installdirs: + for dir in "$(DESTDIR)$(themedir)" "$(DESTDIR)$(themedir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." + -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) +clean: clean-am + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-am + -rm -f Makefile +distclean-am: clean-am distclean-generic + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: install-dist_themeDATA install-nodist_themeDATA + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-dist_themeDATA uninstall-nodist_themeDATA + +.MAKE: install-am install-strip + +.PHONY: all all-am check check-am clean clean-generic clean-libtool \ + distclean distclean-generic distclean-libtool distdir dvi \ + dvi-am html html-am info info-am install install-am \ + install-data install-data-am install-dist_themeDATA \ + install-dvi install-dvi-am install-exec install-exec-am \ + install-html install-html-am install-info install-info-am \ + install-man install-nodist_themeDATA install-pdf \ + install-pdf-am install-ps install-ps-am install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic \ + mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \ + uninstall-dist_themeDATA uninstall-nodist_themeDATA + + +ubuntu-logo.plymouth: $(srcdir)/ubuntu-logo.plymouth.in + sed -e 's,[@]PLYMOUTH_THEME_PATH[@],$(PLYMOUTH_THEME_PATH),g' \ + $(srcdir)/ubuntu-logo.plymouth.in > ubuntu-logo.plymouth + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: --- plymouth-0.8.2.orig/themes/solar/Makefile.in +++ plymouth-0.8.2/themes/solar/Makefile.in @@ -139,6 +139,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PANGO_CFLAGS = @PANGO_CFLAGS@ PANGO_LIBS = @PANGO_LIBS@ --- plymouth-0.8.2.orig/themes/script/Makefile.in +++ plymouth-0.8.2/themes/script/Makefile.in @@ -139,6 +139,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PANGO_CFLAGS = @PANGO_CFLAGS@ PANGO_LIBS = @PANGO_LIBS@ --- plymouth-0.8.2.orig/themes/spinfinity/Makefile.in +++ plymouth-0.8.2/themes/spinfinity/Makefile.in @@ -139,6 +139,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PANGO_CFLAGS = @PANGO_CFLAGS@ PANGO_LIBS = @PANGO_LIBS@ --- plymouth-0.8.2.orig/docs/Makefile.in +++ plymouth-0.8.2/docs/Makefile.in @@ -140,6 +140,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PANGO_CFLAGS = @PANGO_CFLAGS@ PANGO_LIBS = @PANGO_LIBS@ --- plymouth-0.8.2.orig/scripts/Makefile.in +++ plymouth-0.8.2/scripts/Makefile.in @@ -144,6 +144,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PANGO_CFLAGS = @PANGO_CFLAGS@ PANGO_LIBS = @PANGO_LIBS@