]> Anne-Marie Mahfouf

&Anne-Marie.Mahfouf.mail;

20012007 &Anne-Marie.Mahfouf; &FDLNotice; 2008-08-23 2.1 &klettres; is an application specially designed to do help the user to learn alphabet in a new language and then to learn to read simple syllables. The user can be a young child aged from two and a half or an adult that wants to learn the basics of a foreign language. Twenty languages are available at the moment: Arabic, Czech, Brazilian Portuguese, British English, Danish, Dutch, English, French, German, Hebrew, Hungarian, Italian, Kannada, Low Saxon, Luganda, Malayalam, Romanized Hindi, Spanish, Slovak and Telugu but only English, French and your language if it is among those are installed by default. &klettres; is really easy to use. The language can be changed using the Language menu. The user can also choose the Level from 1 to 4 in a combo box in the toolbar or via the Level menu. Themes (background and font color) can be changed in a combo box or in the Look Themes menu. Three themes are available: Kid, Desert and Savannah. Finally, the mode can be changed from kid to grown-up using the Look Mode menu. KDE kdeedu klettres alphabet sounds language keyboard &klettres; is a very simple application that helps a child or an adult to learn the alphabet and some simple sounds in his own language or in another language. The program picks up a letter or a syllable in random, this letter/syllable is displayed and the sound is played. The user should then type this letter or syllable. Training is done in the levels where the letter/syllable is not displayed, only the sound is played. The user does not need to know how to use the mouse, the keyboard only is needed. There are twenty languages available at the moment: Arabic, Czech, Brazilian Portuguese, British English, Danish, Dutch, English, French, German, Hebrew, Hungarian, Italian, Kannada, Low Saxon, Luganda, Malayalam, Romanized Hindi, Spanish, Slovak and Telugu. If your &kde; language is among those, then it is taken as default, otherwise French is the default. You can easily get any additional available language by using the File menu and Get Alphabet in New Language... menu item, provided that your computer is connected to the Internet. Two different modes allow you to adapt &klettres; to your need and have the full usual interface or a stripped interface. For a child, the menubar is no longer visible. We assume that a child will not want to set the language himself. A combo box allows him to choose the different levels. For an older user, the background is not so childish and the menubar is present in the Grown-Up style. Three different themes (Kid, Desert and Savannah) set up a different background with different fonts and colors. You do not need the language keyboard layout anymore as you can use the special Special Characters toolbar to type any special character in each language. In the Settings menu, Toolbars, select Special Characters and the toolbar will appear at the bottom of &klettres;. Click on the letter you want and it will be shown in the input field. This toolbar can be dragged anywhere on your screen. If you prefer having the language keyboard layout, please use &systemsettings;, in the section Personal, Regional & Language and submenu Keyboard Layout in order to set the correct keyboard layout. &klettres; has 4 levels. Levels 1 and 2 deal with the alphabet and levels 3 and 4 concern syllables. For a very young child (2 1/2 to 4), I would suggest that he/she is sitting on your lap in front of the computer and that you do the game together. Screenshot of &klettres; Level 1 &klettres; level1 Level is Level 1, language is French, theme is Desert and mode is grown-up. If your &kde; language is among the supported languages then this will be the default language the first time you run &klettres;. For other languages, English is the default. &klettres; comes with English, French and your default language if among those listed above and you can get additional languages via File Get Alphabet in New Language... provided you have an Internet connection. In level 1, the user sees the letter and hears the sound. He then has to type in the letter in the box. If it is correct, the next letter appears (without having to press Enter or whatever). If the user types the wrong letter, he hears the sound again. In this level, the user memorizes the letters, associates them with their sound and recognizes them on the keyboard. The user can type in either lower or uppercase letters. The letters are automatically put in uppercase so that a child will match them with the keyboard. He can type only one letter at atime. When you type a letter in the input field, there is no need to press Enter and the program waits for a short while before testing if the letter is right. This short wait is to leave time to a young child to understand what he/she just typed, especially if this is the wrong letter. You can change this time by using the Settings menu, Configure &klettres;... and the Timer page which will bring you a dialog where you can set two different times: one for the Kid Mode and one for the Grown-up Mode. After the first time, the language setting is saved in a configuration file on closing of &klettres; and loaded the next time, with the level you were in. The mode (kid or grown-up) is saved in the config file and therefore is kept until you change. The letters appear in random order. They are not the same consecutively. Screenshot of &klettres; Level 2 &klettres; level2 Here is a screenshot of Level 2 with the kid mode, Kid theme and Danish language. Clicking in the Level combo-box and choosing Level 2 or using the Level menu brings you to level 2. In that level, the user only hears the sound of the letter and has to type in the letter. If he is wrong, the letter appears to help him. Screenshot of &klettres; Level 3 &klettres; level3 Here you can see &klettres; level 3, grown-up mode, Savannah theme and Czech language. In level 3, the user sees the syllable and hears the sound. He then has to type in the letters in the box. If the first letter of the sound is wrong, the user cannot type in the second one. The letter disappears and he has to try again. The number of letters is two or three, it depends of the language. Screenshot of &klettres; Level 4 &klettres; level4 Here you can see &klettres; level 4, kid mode, Desert theme and Slovak language. The sounds appear in random order. Clicking in the Level combo-box or using the Level menu in the menubar and choosing Level 4 brings you to level 4. In that level, the user only hears the sound of the syllable and has to type in the letters. This level is quite difficult for a young child. The configuration dialog has two pages: one for Font Settings and one for the Timer. You can easily change the font that displays the letters. In some distribution, the default font used from the system is really ugly. In grown-up mode, in the Settings menu, in Configure &klettres;... you will find a Font Settings page with a font chooser dialog. The new font will be applied to both the displayed letter/syllable and the user field. Changing font is also nice as some fonts (Helvetica for example) do not display correctly East-European languages as Czech and Slovak. If some letters or syllables are not displayed, please change the font and choose Arial for example. You can also choose here the size you like the best. This size will be kept in configuration. Screenshot of &klettres; Font Chooser Dialog &klettres; Font Chooser Dialog Here you can see &klettres; Font Chooser Dialog. The timers set the time between two letters &ie; the time during wich a letter is displayed. The units are tenths of seconds. The Timer page in the Settings Configure &klettres;... dialog has two timers settings: one for the Kid Mode and one for the Grown-up Mode. Defaults are 4 tenths of seconds for Kid Mode and 2 tenths of seconds for Grown-up Mode. Increasing the time leaves you more time to see your errors. Screenshot of &klettres; Timers Settings Screenshot of &klettres; Timers Settings You might want to use &klettres; to help you learn a new language. By using File Get Alphabet in New Language..., you will see a new dialog with the list of available languages (you need to be connected to the Internet to use that feature). Get a New Language Dialog Get a New Language Dialog Click on the Install button on the left of the language you want to install. You'll see the progress bar indicating how the download is progressing. The next screenshot shows Danish being downloaded. Please note that some files have several MB so it might be slow depending on your connection. After the file is downloaded, it is automatically installed and when you close the Get Hot New Stuff dialog you'll see the new language in the Language menu and you can use it immediately. Downloading Downloading When a language is downloaded, you then can see the Install button turning to Uninstall and a green tick appears next to the language name to tell you that this language is available in &klettres;. The next screenshot shows Danish installed. Danish is installed Danish is installed &Ctrl;N File New Sound Play a new sound F5 File Replay Sound Play the same sound again File Get Alphabet in New Language... Opens the Get Hot New Stuff dialog for &klettres; to download a new language &Ctrl;Q File Quit Quits &klettres; Level Level 1 Choose the level 1 (letter displayed and sound) Level Level 2 Choose the level 2 (no letter displayed, sound only) Level Level 3 Choose the level 3 (syllable displayed and sound) Level Level 4 Choose the level 4 (no syllable displayed, sound only) Language English Choose the English language Language French Choose the French language Look Theme Kid Switch to the Kid theme Look Theme Desert Switch to the Desert theme Look Theme Savannah Switch to the Savannah theme &Ctrl;K Look Mode Kid Toggle the kid mode: no menubar &Ctrl;G Look Mode Grownup Toggle the grown-up mode: normal interface &Ctrl;M Settings Hide Menubar Hide the menubar. To show the menubar again, click on the Show Menubar button in the toolbar. Settings Toolbars Toggle the Main and the Special Characters toolbar Settings Show Statusbar Toggle the display of the statusbar Settings Configure Shortcuts... Configure &klettres; shortcuts Settings Configure Toolbars... Configure &klettres; toolbars Settings Configure &klettres;... Configure &klettres;: display a dialog with the Font Settings page and the Timer configuration page. &help.menu.documentation; If you would like to add sounds in your own language, it is very easy to do so. Record the alphabet sounds and place them in a folder named 'alpha'. Then record the most current syllables and put them in a folder named 'syllab'. Create a text file sounds.xml, preferably using &kate; as editor or another editor capable of different encoding. In this file, write all the alphabet sounds and syllable sounds you recorded, like this example for the czech language: <klettres> <language code="cs"> <menuitem> <label>&Czech</label> </menuitem> <alphabet> <sound name="A" file="cs/alpha/a.ogg" /> ... </alphabet> <syllables> <sound name="BA" file="cs/syllab/ba.ogg" /> ... </syllables> </language> </klettres> Replace "cs" with the two letter code and "Czech" with the name of your language. Write the sound names with the special characters of your language in uppercase in utf8. Additionally you can tell me about special letters in your language so I can easily generate the special Special Characters toolbar. Create a text file cs.txt (replace "cs" with the two letter code of your language) with each special character of your language in uppercase on one line. And save both text files with utf8 encoding (upper right dropbox in &kate; allows that) The sounds should be in ogg format and long enough for the audio player to play them (between 1.5 and 2 seconds long, please add some silence if they are too short). Then make a tarball of all that and send it to me. See the &klettres; website for more up to date instructions on how to add a new language. &reporting.bugs; &updating.documentation; The background picture does not appear. If you build &klettres; yourself, you need to configure with the --prefix option set to your &kde; folder or to add this folder to your path. I do not hear any sounds Make sure that &phonon; is working on your system. To do so, open &systemsettings; and in General, Computer Administration click on Sound. I do not see some letters on the icons on the special Characters toolbar. I see rectangles instead for some languages. &klettres; in Czech and Slovak needs Arial and if you do not have this font installed, please ask your distribution support how to install it. If you have &Windows; on your machine, you can use the TTF fonts from &Windows; (Arial is in those) via &systemsettings; -> Computer Administration -> Font Installer and add the &Windows; Font folder. The letters on the icons on the Special Characters toolbar are too small for some languages. &klettres; in Czech and Slovak needs Arial and if you do not have this font installed, please ask your distribution support how to install it. If you have &Windows; on your machine, you can use the TTF fonts from &Windows; (Arial is in those) via &systemsettings; -> Computer Administration -> Font Installer and add the &Windows; Font folder. Why are there only seventeen languages? In order for me to add a new language, I need the sounds for the alphabet and some basic syllables. Someone speaking natively the new language must record these sounds in ogg format. For levels 3 and 4, the syllables must be chosen by a teacher or someone who knows how children learn: these must be the syllables you have to learn just after the alphabet in order to learn well the basics of this language. Please send me a mail if you are able to do that. See the &klettres; website for detailed instructions on how to add a new language. &klettres; Program copyright 2001-2007 &Anne-Marie.Mahfouf; &Anne-Marie.Mahfouf.mail; I am very grateful to the following people whose contribution has been greatly valuable: Brazilian Portuguese sounds: Lindonjohnson Monte (Father) and Michelle Monte 09 years (Son) lindon_johnson@brturbo.com.br Czech sounds: Eva Mikulčíková evmi@seznam.cz Danish sounds: Erik Kjaer Pedersen erik@binghamton.edu Dutch sounds: Geert Stams geert@pa3csg.myweb.nl English sounds: Robert Wadley robntina@juno.com French sounds: Ludovic Grossard grossard@kde.org German sounds: Helmut Kriege h.kriege@freenet.de Hebrew sounds: Assaf Gorgon assafgordon@gmail.com Italian sounds: Pietro Pasotti pietro@itopen.it Kannada sounds: Vikram Vincent vincentvikram@gmail.com Low Saxon sounds: Manfred Wiese and Sönke Dibbern s_dibbern@web.de Luganda sounds: John Magoye and Cormac Lynch cormaclynch@eircom.net Romanized Hindi sounds: Vikas Kharat kharat@sancharnet.in Spanish sounds: Ana Belén Caballero and Juan Pedro Paredes neneta @iquis.com Slovak sounds: Silvia Motyčková and Jozef Říha silviamotycka@seznam.cz Telugu sounds: Pavithran Shakamuri pavithran.s@gmail.com Original icons: &Primoz.Anzur; zerokode@yahoo.com Support and coding guidance: &Robert.Gogolok; &Robert.Gogolok.mail; SVG icon: Chris Luetchford chris@os11.com Code for generating special characters icons: Peter Hedlund peter@peterandlinda.com Port to KConfig XT, coding help: &Waldo.Bastian; &Waldo.Bastian.mail; Kids and grownup SVG icons, Desert theme: &Danny.Allen; dannya40uk@yahoo.co.uk Timer setting widget: Michael Goettsche michael.goettsche@kdemail.net Documentation copyright 2001-2006 &Anne-Marie.Mahfouf;&Anne-Marie.Mahfouf.mail; &underFDL; &underGPL; &documentation.index;