# # PyKota : Print Quotas for CUPS # # (c) 2003-2013 Jerome Alet # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation, either version 3 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see . # # $Id: pykota.po 3561 2013-01-04 22:34:24Z jerome $ # # PyKota translation master file. # Copyright (c) 2003, 2004, 2005 Conseil Internet & Logiciels Libres # Jerome Alet , 2003, 2004, 2005. # msgid "" msgstr "" "Project-Id-Version: PyKota v1.20\n" "Report-Msgid-Bugs-To: alet@librelogiciel.com\n" "POT-Creation-Date: 2006-03-30 22:00+0200\n" "PO-Revision-Date: 2004-10-26 18:51:00+0200\n" "Last-Translator: Spyros Melissovas \n" "Language-Team: Greek \n" "Language: el\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" # # NB : THE FIVE ENTRIES BELOW WERE ADDED MANUALLY # msgid "ALLOW" msgstr "" msgid "DENY" msgstr "" msgid "CANCEL" msgstr "" msgid "PROBLEM" msgstr "" msgid "REFUND" msgstr "" #, python-format msgid "" "autopykota v%(__version__)s (c) %(__years__)s %(__author__)s\n" "\n" "A tool to automate user account creation and initial balance setting.\n" "\n" "THIS TOOL MUST NOT BE USED IF YOU WANT TO LIMIT YOUR USERS BY PAGE QUOTA !\n" "\n" "command line usage :\n" "\n" " THIS TOOL MUST NOT BE USED FROM THE COMMAND LINE BUT ONLY AS PART\n" " OF AN external policy IN pykota.conf\n" " \n" " autopykota { -i | --initbalance value } \n" "\n" "options :\n" "\n" " -v | --version Prints autopykota's version number then exits.\n" " -h | --help Prints this message then exits.\n" " \n" " -i | --initbalance b Sets the user's account initial balance value to b.\n" " If the user already exists, actual balance is left\n" " unmodified. If unset, the default value is 0.\n" "\n" " -e | --email addr Sets the user's e-mail address.\n" " \n" msgstr "" #, python-format msgid "SIGTERM received, job %s cancelled." msgstr "SIGTERM ελήφθη, ακύρωση εργασίας %s." #, python-format msgid "Network error while querying the CUPS server : %s" msgstr "" msgid "You are not allowed to print at this time." msgstr "" msgid "Print job cancelled." msgstr "" msgid "Unlimited" msgstr "" msgid "ON" msgstr "" msgid "OFF" msgstr "" #, python-format msgid "Banner generator %s exit code is %s" msgstr "" msgid "Banner won't be printed : maximum number of deny banners reached." msgstr "" #, python-format msgid "Beware : computed job size (%s) != precomputed job size (%s)" msgstr "" msgid "The job size will be trusted anyway according to the 'trustjobsize' directive" msgstr "" #, python-format msgid "The job size will be trusted because it is inferior to the 'trustjobsize' directive's limit %s" msgstr "" #, python-format msgid "The job size will be modified according to the 'trustjobsize' directive : %s" msgstr "" #, python-format msgid "Printer %s not registered in the PyKota system, applying external policy (%s) for printer %s" msgstr "Ο εκτυπωτής %s δεν είναι καταχωρημένος στο σύστημα PyKota, εφαρμογή εξωτερικής πολιτικής (%s) για τον εκτυπωτή %s" #, python-format msgid "User %s not registered in the PyKota system, applying external policy (%s) for printer %s" msgstr "Ο χρήστης %s δεν είναι καταχωρημένος στο σύστημα PyKota, εφαρμογή εξωτερικής πολιτικής (%s) για τον εκτυπωτή %s" #, python-format msgid "User %s doesn't have quota on printer %s in the PyKota system, applying external policy (%s) for printer %s" msgstr "Ο χρήστης %s δεν έχει όριο στον εκτυπωτή %s στο σύστημα PyKota, εφαρμογή εξωτερικής πολιτικής (%s) για τον εκτυπωτή %s" #, python-format msgid "External policy %s for printer %s produced an error. Job rejected. Please check PyKota's configuration files." msgstr "Η εξωτερική πολιτική %s για τον εκτυπωτή %s παρήγαγε σφάλμα.Απόρριψη εργασίας. Παρακαλώ ελέγξτε τα αρχεία ρυθμίσεων του PyKota." #, python-format msgid "Printer %s not registered in the PyKota system, applying default policy (%s)" msgstr "Ο εκτυπωτής %s δεν είναι καταχωρημένος στο σύστημα PyKota, εφαρμογή ερήμην πολιτικής (%s)" #, python-format msgid "User %s not registered in the PyKota system, applying default policy (%s) for printer %s" msgstr "Ο χρήστης %s δεν είναι καταχωρημένος στο σύστημα PyKota, εφαρμογή ερήμην πολιτικής (%s) για τον εκτυπωτή %s" #, python-format msgid "User %s doesn't have quota on printer %s in the PyKota system, applying default policy (%s)" msgstr "Ο χρήστης %s δεν έχει όριο στον εκτυπωτή %s στο σύστημα PyKota, εφαρμογή ερήμην πολιτικής (%s)" #, python-format msgid "Printer %s still not registered in the PyKota system, job will be rejected" msgstr "Ο εκτυπωτής %s δεν είναι ακόμη καταχωρημένος στο σύστημα PyKota, η εργασία θα απορριφθεί" #, python-format msgid "User %s still not registered in the PyKota system, job will be rejected on printer %s" msgstr "Ο χρήστης %s δεν είναι ακόμη καταχωρημένος στο σύστημα PyKota, η εργασία θα απορριφθεί στον εκτυπωτή %s" #, python-format msgid "User %s still doesn't have quota on printer %s in the PyKota system, job will be rejected" msgstr "Ο χρήστης %s δεν έχει ακόμη όριο στον εκτυπωτή %s στο σύστημα PyKota, η εργασία θα απορριφθεί" msgid "Job is a dupe" msgstr "" msgid "Printing is denied by configuration" msgstr "" #, python-format msgid "Duplicate print jobs are not allowed on printer %s." msgstr "" msgid "Subprocess denied printing of a dupe" msgstr "" #, python-format msgid "Duplicate print jobs are not allowed on printer %s at this time." msgstr "" msgid "Subprocess allowed printing of a dupe" msgstr "" #, python-format msgid "" "\n" "\n" "Your system administrator :\n" "\n" "\t%s - <%s>\n" msgstr "" #, python-format msgid "Impossible to connect to SMTP server : %s" msgstr "Αδύνατη η σύνδεση με τον εξυπηρετητή SMTP : %s" msgid "Print Quota" msgstr "Όριο εκτυπώσεων" #, python-format msgid "Impossible to send mail to %s, error %s : %s" msgstr "Αδύνατη η αποστολή e-mail στον %s, σφάλμα %s : %s" #, python-format msgid "Problem when sending mail : %s" msgstr "" msgid "Job contains no data. Printing is denied." msgstr "Η εργασία δεν περιέχει δεδομένα. Η εκτύπωση απορρίπτεται." msgid "Error in external policy script. Printing is denied." msgstr "" #, python-format msgid "Still no print quota entry for user %s on printer %s after external policy. Printing is denied." msgstr "" msgid "Printing is denied by printer policy." msgstr "" msgid "Job allowed by printer policy. No accounting will be done." msgstr "" #, python-format msgid "Invalid policy %s for printer %s" msgstr "Μη αποδεκτή πολιτική %s για τον εκτυπωτή %s" #, python-format msgid "Precomputed job size (%s pages) too large for printer %s." msgstr "" #, python-format msgid "You are not allowed to print so many pages on printer %s at this time." msgstr "" #, python-format msgid "User %s is not allowed to print at this time." msgstr "" msgid "Your account settings forbid you to print at this time." msgstr "" #, python-format msgid "Print Quota exceeded for user %s on printer %s" msgstr "Υπέρβαση ορίου εκτυπώσεων για τον χρήστη %s στον εκτυπωτή %s" #, python-format msgid "Print Quota low for user %s on printer %s" msgstr "Χαμηλό υπόλοιπο εκτυπώσεων για τον χρήστη %s στον εκτυπωτή %s" msgid "Job denied, no accounting will be done." msgstr "" msgid "Job cancelled, no accounting will be done." msgstr "" msgid "Job accounting begins." msgstr "Έναρξη σελιδομέτρησης εργασίας." msgid "Job denied, no accounting has been done." msgstr "" msgid "Job cancelled, no accounting has been done." msgstr "" msgid "Job accounting ends." msgstr "Λήξη σελιδομέτρησης εργασίας." msgid "Job size forced to 0 because the real CUPS backend failed. No accounting will be done." msgstr "" msgid "The real CUPS backend failed, but the job will be accounted for anyway." msgstr "" msgid "Job size forced to 0 because printing is denied." msgstr "Το μέγεθος της εργασίας μηδενίστηκε γιατί η εκτύπωση απαγορεύεται." msgid "Job size forced to 0 because printing was cancelled." msgstr "" #, python-format msgid "Job size : %i" msgstr "Μέγεθος εργασίας : %i" #, python-format msgid "User %s's quota on printer %s won't be modified" msgstr "" #, python-format msgid "Updating user %s's quota on printer %s" msgstr "Ενημέρωση ορίου του χρήστη %s στον εκτυπωτή %s" msgid "Job added to history." msgstr "Η εργασία προστέθηκε στο ιστορικό." #, python-format msgid "Billing code %s was updated." msgstr "" #, python-format msgid "Incorrect value for the 'onbackenderror' directive in section [%s]" msgstr "" #, python-format msgid "The real backend produced an error, we will try again in %s seconds." msgstr "" #, python-format msgid "Job %s interrupted by the administrator !" msgstr "" #, python-format msgid "" "dumpykota v%(__version__)s (c) %(__years__)s %(__author__)s\n" "\n" "Dumps PyKota database's content.\n" "\n" "command line usage :\n" "\n" " dumpykota [options] [filterexpr]\n" "\n" "options :\n" "\n" " -v | --version Prints dumpykota's version number then exits.\n" " -h | --help Prints this message then exits.\n" " \n" " -d | --data type Dumps 'type' datas. Allowed types are :\n" " \n" " - history : dumps the jobs history.\n" " - users : dumps users.\n" " - groups : dumps user groups.\n" " - printers : dump printers.\n" " - upquotas : dump user quotas.\n" " - gpquotas : dump user groups quotas.\n" " - payments : dumps user payments.\n" " - pmembers : dumps printer groups members.\n" " - umembers : dumps user groups members.\n" " - billingcodes : dumps billing codes.\n" " - all : dumps all PyKota datas. The output format\n" " is always XML in this case.\n" " \n" " NB : the -d | --data command line option \n" " is MANDATORY.\n" " \n" " -f | --format fmt Dumps datas in the 'fmt' format. When not specified,\n" " the format is to dump datas in the csv format (comma\n" " separated values). All data dumped is between double\n" " quotes. Allowed formats are :\n" " \n" " - csv : separate datas with commas\n" " - ssv : separate datas with semicolons\n" " - tsv : separate datas with tabs\n" " - xml : dump data as XML \n" " - cups : dump datas in CUPS' page_log format :\n" " ONLY AVAILABLE WITH --data history\n" " \n" " -o | --output fname All datas will be dumped to the file instead of\n" " to the standard output. The special '-' filename\n" " is the default value and means stdout.\n" " WARNING : existing files are truncated !\n" "\n" " -O | --orderby exp Change the ordering or result. 'exp' is a comma\n" " separated list of ordering statements, for example\n" " '--orderby +username,-printername'. Not all expression\n" " values are meaningful, so using this command line \n" " switch is not recommanded if you don't know the \n" " exact layout of PyKota's database schema.\n" " \n" " -s | --sum Summarize the selected datas.\n" " ONLY AVAILABLE WITH --data history or payments\n" "\n" " Use the filter expressions to extract only parts of the \n" " datas. Allowed filters are of the form :\n" " \n" " key=value\n" " \n" " Allowed keys for now are : \n" " \n" " username User's name\n" " groupname Users group's name\n" " printername Printer's name\n" " pgroupname Printers group's name\n" " hostname Client's hostname\n" " jobid Job's Id\n" " billingcode Job's billing code\n" " start Job's date of printing\n" " end Job's date of printing\n" " \n" " Dates formatting with 'start' and 'end' filter keys :\n" " \n" " YYYY : year boundaries\n" " YYYYMM : month boundaries\n" " YYYYMMDD : day boundaries\n" " YYYYMMDDhh : hour boundaries\n" " YYYYMMDDhhmm : minute boundaries\n" " YYYYMMDDhhmmss : second boundaries\n" " yesterday[+-NbDays] : yesterday more or less N days (e.g. : yesterday-15)\n" " today[+-NbDays] : today more or less N days (e.g. : today-15)\n" " tomorrow[+-NbDays] : tomorrow more or less N days (e.g. : tomorrow-15)\n" " now[+-NbDays] : now more or less N days (e.g. now-15)\n" "\n" " 'now' and 'today' are not exactly the same since today represents the first\n" " or last second of the day depending on if it's used in a start= or end=\n" " date expression. The utility to be able to specify dates in the future is\n" " a question which remains to be answered :-)\n" " \n" " Contrary to other PyKota management tools, wildcard characters are not \n" " expanded, so you can't use them.\n" " \n" " NB : not all keys are allowed for each data type, so the result may be \n" " empty if you use a key not available for a particular data type.\n" " \n" "Examples :\n" "\n" " $ dumpykota --data history --format csv >myfile.csv\n" " \n" " This dumps the history in a comma separated values file, for possible\n" " use in a spreadsheet.\n" " \n" " $ dumpykota --data users --format xml -o users.xml\n" " \n" " Dumps all users datas to the users.xml file.\n" " \n" " $ dumpykota --data history printername=HP2100 username=jerome\n" " \n" " Dumps the job history for user jerome on printer HP2100 only.\n" " \n" " $ dumpykota --data history start=200503 end=20050730234615\n" " \n" " Dumps all jobs printed between March 1st 2005 at midnight and\n" " July 30th 2005 at 23 hours 46 minutes and 15 secondes included.\n" msgstr "" msgid "The -d | --data command line option is mandatory, see help." msgstr "Η παράμετρος -d | --data είναι υποχρεωτική, δείτε τη βοήθεια." #, python-format msgid "" "edpykota v%(__version__)s (c) %(__years__)s %(__author__)s\n" "\n" "A Print Quota editor for PyKota.\n" "\n" "command line usage :\n" "\n" " edpykota [options] user1 user2 ... userN\n" " \n" " edpykota [options] group1 group2 ... groupN\n" "\n" "options :\n" "\n" " -v | --version Prints edpykota's version number then exits.\n" " -h | --help Prints this message then exits.\n" " \n" " -a | --add Adds users or groups print quota entries if\n" " they don't exist in database.\n" " \n" " -d | --delete Deletes users or groups print quota entries.\n" " Users or groups are never deleted, you have\n" " to use the pkusers command to delete them.\n" " The history will be purge from all matching\n" " jobs, unless -g | --groups is used.\n" " \n" " -P | --printer p Edit quotas on printer p only. Actually p can\n" " use wildcards characters to select only\n" " some printers. The default value is *, meaning\n" " all printers. \n" " You can specify several names or wildcards, \n" " by separating them with commas.\n" " \n" " -g | --groups Edit groups print quota entries instead of \n" " users print quota entries.\n" " \n" " -L | --list Lists users or groups print quota entries.\n" " \n" " -n | --noquota Sets both soft and hard limits to None for users\n" " or groups print quota entries.\n" " \n" " -r | --reset Resets the actual page counter for the user\n" " or group to zero on the specified printers. \n" " The life time page counter is kept unchanged.\n" " \n" " -R | --hardreset Resets the actual and life time page counters\n" " for the user or group to zero on the specified \n" " printers. This is a shortcut for '--used 0'.\n" " \n" " -s | --skipexisting In combination with the --add option above, tells\n" " edpykota to not modify existing print quota entries.\n" " \n" " -S | --softlimit sl Sets the quota soft limit to sl pages. \n" " \n" " -H | --hardlimit hl Sets the quota hard limit to hl pages.\n" " \n" " -I | --increase v Increase existing Soft and Hard limits by the value\n" " of v. You can prefix v with + or -, if no sign is\n" " used, + is assumed.\n" "\n" " -U | --used u Sets the page counters for the user u pages on\n" " the selected printers. Doesn't work for groups, since\n" " their page counters are the sum of all their members'\n" " page counters.\n" " Useful for migrating users from a different system\n" " where they have already used some pages. Actual\n" " and Life Time page counters may be increased or decreased\n" " if u is prefixed with + or -.\n" " WARNING : BOTH page counters are modified in all cases,\n" " so be careful.\n" " NB : if u equals '0', then the action taken is\n" " the same as if --hardreset was used.\n" "\n" " user1 through userN and group1 through groupN can use wildcards\n" " if the --add option is not set.\n" " \n" "examples : \n" "\n" " $ edpykota --add john paul george ringo\n" " \n" " This will create print quota entries for users john, paul, george\n" " and ringo on all printers. These print quota entries will have no\n" " limit set.\n" " \n" " $ edpykota --printer lp -S 50 -H 60 jerome\n" " \n" " This will set jerome's print quota on the lp printer to a soft limit\n" " of 50 pages, and a hard limit of 60 pages. Both user jerome and\n" " printer lp have been previously created with the pkusers and pkprinters\n" " commands, respectively.\n" "\n" " $ edpykota -g -S 500 -H 550 financial support \n" " \n" " This will set print quota soft limit to 500 pages and hard limit\n" " to 550 pages for groups financial and support on all printers.\n" " \n" " $ edpykota --reset jerome \"jo*\"\n" " \n" " This will reset jerome's page counter to zero on all printers, as\n" " well as every user whose name begins with 'jo'.\n" " Their life time page counter on each printer will be kept unchanged.\n" " You can also reset the life time page counters by using the\n" " --hardreset | -R command line option.\n" " \n" " $ edpykota --printer hpcolor --noquota jerome\n" " \n" " This will tell PyKota to not limit jerome when printing on the \n" " hpcolor printer. All his jobs will be allowed on this printer, but \n" " accounting of the pages he prints will still be kept.\n" " Print Quotas for jerome on other printers are unchanged.\n" " \n" " $ edpykota --delete --printer \"HP*,XER*\" jerome rachel\n" " \n" " This will delete users jerome and rachel's print quota\n" " entries on all printers which name begin with 'HP' or\n" " 'XER'. The jobs printed by these users on these printers\n" " will be deleted from the history.\n" msgstr "" #, python-format msgid "You can't set negative limits for %s" msgstr "" msgid "Extracting datas" msgstr "" #, python-format msgid "Page counter : %s" msgstr "" #, python-format msgid "Lifetime page counter : %s" msgstr "" #, python-format msgid "Soft limit : %s" msgstr "" #, python-format msgid "Hard limit : %s" msgstr "" #, python-format msgid "Date limit : %s" msgstr "" #, python-format msgid "Maximum job size : %s" msgstr "" #, python-format msgid "%s pages" msgstr "" #, python-format msgid "Warning banners printed : %s" msgstr "" msgid "Deletion" msgstr "" #, python-format msgid "Invalid used value %s." msgstr "" #, python-format msgid "Invalid increase value %s." msgstr "" #, python-format msgid "Invalid softlimit value %s." msgstr "Μη αποδεκτό όριο προειδοποίησης %s." #, python-format msgid "Invalid hardlimit value %s." msgstr "Μη αποδεκτό ανώτατο όριο %s." #, python-format msgid "Hard limit %i is less than soft limit %i, values will be exchanged." msgstr "Το ανώτατο όριο %i είναι μικρότερο από το όριο προειδοποίησης %i, ανταλλαγή τιμών." #, python-format msgid "Undefined hard limit set to soft limit (%s)." msgstr "" #, python-format msgid "Undefined soft limit set to hard limit (%s)." msgstr "" msgid "Creation" msgstr "" #, python-format msgid "No entry matches %s. Please use pkusers to create them first." msgstr "" msgid "Modification" msgstr "" msgid "incompatible options, see help." msgstr "ασύμβατες παράμετροι, διαβάστε τη βοήθεια." msgid "You have to pass user or group names on the command line" msgstr "Πρέπει να εισάγετε ονόματα χρηστών ή ομάδων στην γραμμή εντολών" #, python-format msgid "" "repykota v%(__version__)s (c) %(__years__)s %(__author__)s\n" "\n" "Generates print quota reports.\n" "\n" "command line usage :\n" "\n" " repykota [options] \n" "\n" "options :\n" "\n" " -v | --version Prints repykota's version number then exits.\n" " -h | --help Prints this message then exits.\n" " \n" " -u | --users Generates a report on users quota, this is \n" " the default.\n" " \n" " -g | --groups Generates a report on group quota instead of users.\n" " \n" " -i | --ingroups g1[,g2...] Only lists users who are members of these\n" " groups. Reserved to PyKota Administrators.\n" " \n" " -P | --printer p Report quotas on this printer only. Actually p can\n" " use wildcards characters to select only\n" " some printers. The default value is *, meaning\n" " all printers.\n" " You can specify several names or wildcards, \n" " by separating them with commas.\n" " \n" "examples : \n" "\n" " $ repykota --printer lp\n" " \n" " This will print the quota status for all users who use the lp printer.\n" "\n" " $ repykota \n" " \n" " This will print the quota status for all users on all printers.\n" " \n" " $ repykota --printer \"laser*,*pson\" jerome \"jo*\"\n" " \n" " This will print the quota status for user jerome and all users\n" " whose name begins with \"jo\" on all printers which name begins\n" " with \"laser\" or ends with \"pson\".\n" " \n" " If launched by an user who is not a PyKota administrator, additionnal\n" " arguments representing users or groups names are ignored, and only the\n" " current user/group is reported.\n" msgstr "" msgid "Option --ingroups is reserved to PyKota Administrators." msgstr "" #, python-format msgid "There's no printer matching %s" msgstr "Δεν υπάρχει εκτυπωτής που να ταιριάζει στο %s" #, python-format msgid "" "warnpykota v%(__version__)s (c) %(__years__)s %(__author__)s\n" "\n" "Sends mail to users over print quota.\n" "\n" "command line usage :\n" "\n" " warnpykota [options] [names]\n" "\n" "options :\n" "\n" " -v | --version Prints warnpykota's version number then exits.\n" " -h | --help Prints this message then exits.\n" " \n" " -u | --users Warns users over their print quota, this is the \n" " default.\n" " \n" " -g | --groups Warns users whose groups quota are over limit.\n" " \n" " -P | --printer p Verify quotas on this printer only. Actually p can\n" " use wildcards characters to select only\n" " some printers. The default value is *, meaning\n" " all printers.\n" " You can specify several names or wildcards, \n" " by separating them with commas.\n" " \n" "examples : \n" "\n" " $ warnpykota --printer lp\n" " \n" " This will warn all users of the lp printer who have exceeded their\n" " print quota.\n" "\n" " $ warnpykota \n" " \n" " This will warn all users who have exceeded their print quota on\n" " any printer.\n" "\n" " $ warnpykota --groups --printer \"laserjet*\" \"dev*\"\n" " \n" " This will warn all users of groups which names begins with \"dev\" and\n" " who have exceeded their print quota on any printer which name begins \n" " with \"laserjet\"\n" " \n" " If launched by an user who is not a PyKota administrator, additionnal\n" " arguments representing users or groups names are ignored, and only the\n" " current user/group is reported.\n" msgstr "" #, python-format msgid "" "pkbanner v%(__version__)s (c) %(__years__)s %(__author__)s\n" "\n" "Generates banners.\n" "\n" "command line usage :\n" "\n" " pkbanner [options] [more info]\n" "\n" "options :\n" "\n" " -v | --version Prints pkbanner's version number then exits.\n" " -h | --help Prints this message then exits.\n" " \n" " -l | --logo img Use the image as the banner's logo. The logo will\n" " be drawn at the center top of the page. The default\n" " logo is /usr/share/pykota/logos/pykota.jpeg\n" " \n" " -p | --pagesize sz Sets sz as the page size. Most well known\n" " page sizes are recognized, like 'A4' or 'Letter'\n" " to name a few. The default size is A4.\n" " \n" " -s | --savetoner s Sets the text luminosity factor to s%%. This can be \n" " used to save toner. The default value is 0, which\n" " means that no toner saving will be done.\n" " \n" " -u | --url u Uses u as an url to be written at the bottom of \n" " the banner page. The default url is :\n" " http://www.pykota.com/\n" " \n" "examples : \n" "\n" " Using pkbanner directly from the command line is not recommended,\n" " excepted for testing purposes. You should use pkbanner in the\n" " 'startingbanner' or 'endingbanner' directives in pykota.conf\n" " \n" " startingbanner: /usr/bin/pkbanner --logo=\"\" --savetoner=75\n" " \n" " With such a setting in pykota.conf, all print jobs will be \n" " prefixed with an A4 banner with no logo, and text luminosity will\n" " be increased by 75%%. The PostScript output will be directly sent\n" " to your printer.\n" " \n" " You'll find more examples in the sample configuration file included \n" " in PyKota.\n" msgstr "" msgid "Unknown" msgstr "" msgid "Username" msgstr "" msgid "More Info" msgstr "" msgid "Job" msgstr "" msgid "Date" msgstr "Ημερομηνία" msgid "Allowed" msgstr "" msgid "Denied" msgstr "" msgid "Allowed with Warning" msgstr "" msgid "Problem" msgstr "" msgid "Cancelled" msgstr "" msgid "Result" msgstr "" msgid "Title" msgstr "Τίτλος" msgid "Filename" msgstr "Όνομα αρχείου" #, python-format msgid "Pages printed so far on %s" msgstr "" msgid "Account balance" msgstr "" msgid "Soft Limit" msgstr "" msgid "Hard Limit" msgstr "" msgid "Date Limit" msgstr "" msgid "No Limit" msgstr "" msgid "No Accounting" msgstr "" msgid "Forbidden" msgstr "" msgid "Printing Mode" msgstr "" msgid "Allowed range is (0..99)" msgstr "" #, python-format msgid "Invalid 'savetoner' option %s : %s" msgstr "" #, python-format msgid "Invalid 'pagesize' option %s, defaulting to A4." msgstr "" #, python-format msgid "" "pkbcodes v%(__version__)s (c) %(__years__)s %(__author__)s\n" "\n" "A billing codes Manager for PyKota.\n" "\n" "command line usage :\n" "\n" " pkbcodes [options] code1 code2 code3 ... codeN\n" "\n" "options :\n" "\n" " -v | --version Prints pkbcodes version number then exits.\n" " -h | --help Prints this message then exits.\n" " \n" " -a | --add Adds billing codes if they don't exist in PyKota's\n" " database. If they exist, they are modified\n" " unless -s|--skipexisting is also used.\n" "\n" " -d | --delete Deletes billing codes from PyKota's database.\n" " NB : the history entries with this billing code\n" " are not deleted, voluntarily.\n" "\n" " -D | --description d Adds a textual description to billing codes.\n" "\n" " -l | --list List informations about the billing codes.\n" "\n" " -r | --reset Resets the billing codes' balance and page counters\n" " to 0.\n" "\n" " -s | --skipexisting In combination with the --add option above, tells\n" " pkbcodes to not modify existing billing codes.\n" "\n" " code1 through codeN can contain wildcards if the --add option\n" " is not set.\n" "\n" "examples : \n" "\n" " $ pkbcodes --add -D \"My project\" myproj\n" "\n" " Will create the myproj billing code with \"My project\"\n" " as the description.\n" "\n" " $ pkbcodes --delete \"*\"\n" "\n" " This will completely delete all the billing codes, but without\n" " removing any matching job from the history. USE WITH CARE ANYWAY !\n" " \n" " $ pkbcodes --list \"my*\"\n" " \n" " This will list all billing codes which name begins with 'my'.\n" msgstr "" msgid "You're not allowed to use this command." msgstr "Απαγορεύεται να χρησιμοποιήσετε αυτή την εντολή" #, python-format msgid "There's no billingcode matching %s" msgstr "" msgid "pages" msgstr "" msgid "and" msgstr "" msgid "credits" msgstr "" #, python-format msgid "Billing code [%s] already exists, skipping." msgstr "" #, python-format msgid "Billing code [%s] already exists, will be modified." msgstr "" msgid "You have to pass billing codes on the command line" msgstr "" #, python-format msgid "" "pkinvoice v%(__version__)s (c) %(__years__)s %(__author__)s\n" "\n" "An invoice generator for PyKota.\n" "\n" "command line usage :\n" "\n" " pkinvoice [options] [filterexpr]\n" "\n" "options :\n" "\n" " -v | --version Prints pkinvoice's version number then exits.\n" " -h | --help Prints this message then exits.\n" " \n" " -l | --logo img Use the image as the invoice's logo. The logo will\n" " be drawn at the center top of the page. The default\n" " logo is /usr/share/pykota/logos/pykota.jpeg\n" " \n" " -p | --pagesize sz Sets sz as the page size. Most well known\n" " page sizes are recognized, like 'A4' or 'Letter'\n" " to name a few. The default size is A4.\n" " \n" " -n | --number N Sets the number of the first invoice. This number\n" " will automatically be incremented for each invoice.\n" " \n" " -o | --output f.pdf Defines the name of the invoice file which will\n" " be generated as a PDF document. If not set or\n" " set to '-', the PDF document is sent to standard\n" " output. \n" " \n" " -u | --unit u Defines the name of the unit to use on the invoice. \n" " The default unit is 'Credits', optionally translated\n" " to your native language if it is supported by PyKota.\n" " \n" " -V | --vat p Sets the percent value of the applicable VAT to be\n" " exposed. The default is 0.0, meaning no VAT\n" " information will be included.\n" " \n" "\n" " Use the filter expressions to extract only parts of the \n" " datas. Allowed filters are of the form :\n" " \n" " key=value\n" " \n" " Allowed keys for now are : \n" " \n" " username User's name\n" " printername Printer's name\n" " hostname Client's hostname\n" " jobid Job's Id\n" " billingcode Job's billing code\n" " start Job's date of printing\n" " end Job's date of printing\n" " \n" " Dates formatting with 'start' and 'end' filter keys :\n" " \n" " YYYY : year boundaries\n" " YYYYMM : month boundaries\n" " YYYYMMDD : day boundaries\n" " YYYYMMDDhh : hour boundaries\n" " YYYYMMDDhhmm : minute boundaries\n" " YYYYMMDDhhmmss : second boundaries\n" " yesterday[+-NbDays] : yesterday more or less N days (e.g. : yesterday-15)\n" " today[+-NbDays] : today more or less N days (e.g. : today-15)\n" " tomorrow[+-NbDays] : tomorrow more or less N days (e.g. : tomorrow-15)\n" " now[+-NbDays] : now more or less N days (e.g. now-15)\n" "\n" " 'now' and 'today' are not exactly the same since today represents the first\n" " or last second of the day depending on if it's used in a start= or end=\n" " date expression. The utility to be able to specify dates in the future is\n" " a question which remains to be answered :-)\n" " \n" " Contrary to other PyKota management tools, wildcard characters are not \n" " expanded, so you can't use them.\n" " \n" "examples :\n" "\n" " $ pkinvoice --unit EURO --output /tmp/invoices.pdf start=now-30\n" " \n" " Will generate a PDF document containing invoices for all users\n" " who have spent some credits last month. Invoices will be done in\n" " EURO. No VAT information will be included.\n" msgstr "" msgid "Invoice" msgstr "" msgid "Edited on" msgstr "" msgid "Number of jobs printed" msgstr "" msgid "Number of pages printed" msgstr "" msgid "Amount due" msgstr "" msgid "Included VAT" msgstr "" msgid "Here's the invoice for your printouts" msgstr "" msgid "Generating invoices" msgstr "" #, python-format msgid "Incorrect value '%s' for the --vat command line option" msgstr "" #, python-format msgid "Incorrect value '%s' for the --number command line option" msgstr "" #, python-format msgid "Invalid filter value [%s], see help." msgstr "" #, python-format msgid "Invoiced %i users for %i jobs, %i pages and %.3f credits" msgstr "" msgid "Credits" msgstr "" #, python-format msgid "" "pkmail v%(__version__)s (c) %(__years__)s %(__author__)s\n" "\n" "Email gateway for PyKota.\n" "\n" "command line usage :\n" "\n" " pkmail [options]\n" "\n" "options :\n" "\n" " -v | --version Prints pkmail's version number then exits.\n" " -h | --help Prints this message then exits.\n" " \n" " \n" " This command is meant to be used from your mail server's aliases file,\n" " as a pipe. It will then accept commands send to it in email messages,\n" " and will send the answer to the command's originator.\n" " \n" " To use this command, create an email alias in /etc/aliases with\n" " the following format :\n" " \n" " pykotacmd: \"|/usr/bin/pkmail\"\n" " \n" " Then run the 'newaliases' command to regenerate the aliases database.\n" " \n" " You can now send commands by email to 'pykotacmd@yourdomain.com', with\n" " the command in the subject.\n" " \n" " List of supported commands :\n" " \n" " report [username]\n" " \n" " NB : For pkmail to work correctly, you may have to put the 'mail'\n" " system user in the 'pykota' system group to ensure this user can\n" " read the /etc/pykota/pykotadmin.conf file, and restart your\n" " mail server (e.g. /etc/init.d/exim restart). It is strongly advised\n" " that you think at least twice before doing this though.\n" " \n" " Use at your own risk !\n" msgstr "" msgid "Result of your commands" msgstr "" #, python-format msgid "" "pknotify v%(__version__)s (c) %(__years__)s %(__author__)s\n" "\n" "Notifies or ask questions to end users who launched the PyKotIcon application.\n" "\n" "command line usage :\n" "\n" " pknotify [options] [arguments]\n" "\n" "options :\n" "\n" " -v | --version Prints pknotify's version number then exits.\n" " -h | --help Prints this message then exits.\n" " \n" " -d | --destination h[:p] Sets the destination hostname and optional\n" " port onto which contact the remote PyKotIcon\n" " application. This option is mandatory.\n" " When not specified, the port defaults to 7654.\n" " \n" " -a | --ask Tells pknotify to ask something to the end\n" " user. Then pknotify will output the result.\n" " \n" " -C | --checkauth When --ask is used and both an 'username' and a\n" " 'password' are asked to the end user, then\n" " pknotify will try to authenticate the user\n" " through PAM. If authentified, this program\n" " will print \"AUTH=YES\", else \"AUTH=NO\".\n" " If a field is missing, \"AUTH=IMPOSSIBLE\" will\n" " be printed. If the user is authenticated, then\n" " \"USERNAME=xxxx\" will be printed as well.\n" " \n" " -c | --confirm Tells pknotify to ask for either a confirmation \n" " or abortion.\n" " \n" " -D | --denyafter N With --checkauth above, makes pknotify loop \n" " up to N times if the password is incorrect.\n" " After having reached the limit, \"DENY\" will\n" " be printed, which effectively rejects the job.\n" " The default value of N is 1, meaning the job\n" " is denied after the first unsuccessful try.\n" " \n" " -N | --noremote action If it's impossible to connect to the remote\n" " PyKotIcon machine, do this action instead.\n" " Allowed actions are 'CONTINUE' and 'CANCEL', \n" " which will respectively allow the processing\n" " of the print job to continue, or the job to\n" " be cancelled. The default value is CANCEL.\n" " \n" " -n | --notify Tells pknotify to send an informational message\n" " to the end user.\n" " \n" " -q | --quit Tells pknotify to send a message asking the\n" " PyKotIcon application to exit. This option can\n" " be combined with the other ones to make PyKotIcon\n" " exit after having sent the answer from the dialog.\n" " \n" " -t | --timeout T Tells pknotify to ignore the end user's answer if\n" " it comes past T seconds after the dialog box being\n" " opened. The default value is 0 seconds, which \n" " tells pknotify to wait indefinitely.\n" " Use this option to avoid having an user who\n" " leaved his computer stall a whole print queue.\n" " \n" " You MUST specify either --ask, --confirm, --notify or --quit.\n" "\n" " arguments : \n" " \n" " -a | --ask : Several arguments are accepted, of the form\n" " \"label:varname:defaultvalue\". The result will\n" " be printed to stdout in the following format :\n" " VAR1NAME=VAR1VALUE\n" " VAR2NAME=VAR2VALUE\n" " ...\n" " If the dialog was cancelled, nothing will be\n" " printed. If one of the varname is 'password'\n" " then this field is asked as a password (you won't\n" " see what you type in), and is NOT printed. Although\n" " it is not printed, it will be used to check if\n" " authentication is valid if you specify --checkauth.\n" " \n" " -c | --confirm : A single argument is expected, representing the\n" " message to display. If the dialog is confirmed\n" " then pknotify will print OK, else CANCEL.\n" " \n" " -n | --notify : A single argument is expected, representing the \n" " message to display. In this case pknotify will\n" " always print OK.\n" " \n" "examples : \n" "\n" " pknotify -d client:7654 --noremote CONTINUE --confirm \"This job costs 10 credits\"\n" " \n" " Would display the cost of the print job and asks for confirmation.\n" " If the end user doesn't have PyKotIcon running and accepting connections\n" " from the print server, PyKota will consider that the end user accepted\n" " to print this job.\n" " \n" " pknotify --destination $PYKOTAJOBORIGINATINGHOSTNAME:7654 \\\n" " --checkauth --ask \"Your name:username:\" \"Your password:password:\"\n" " \n" " Asks an username and password, and checks if they are valid. \n" " NB : The PYKOTAJOBORIGINATINGHOSTNAME environment variable is\n" " only set if you launch pknotify from cupspykota through a directive\n" " in ~pykota/pykota.conf\n" " \n" " The TCP port you'll use must be reachable on the client from the\n" " print server.\n" msgstr "" msgid "You MUST install PyPAM for this functionnality to work !" msgstr "" #, python-format msgid "Authentication error for user %s : %s" msgstr "" #, python-format msgid "Internal error : can't authenticate user %s" msgstr "" #, python-format msgid "Password correct for user %s" msgstr "" #, python-format msgid "The end user at %s:%i didn't answer within %i seconds. The print job will be cancelled." msgstr "" #, python-format msgid "Are you sure that PyKotIcon is running and accepting incoming connections on %s:%s ?" msgstr "" msgid "Connection error" msgstr "" msgid "some options are mandatory, see help." msgstr "" msgid "incorrect value for the --noremote command line switch, see help." msgstr "" msgid "some options require arguments, see help." msgstr "" #, python-format msgid "" "pkprinters v%(__version__)s (c) %(__years__)s %(__author__)s\n" "\n" "A Printers Manager for PyKota.\n" "\n" "command line usage :\n" "\n" " pkprinters [options] printer1 printer2 printer3 ... printerN\n" "\n" "options :\n" "\n" " -v | --version Prints pkprinters's version number then exits.\n" " -h | --help Prints this message then exits.\n" " \n" " -a | --add Adds printers if they don't exist on the Quota \n" " Storage Server. If they exist, they are modified\n" " unless -s|--skipexisting is also used.\n" " \n" " -d | --delete Deletes printers from the quota storage.\n" " \n" " -D | --description d Adds a textual description to printers.\n" "\n" " -C | --cups Also modifies the DeviceURI in CUPS' printers.conf\n" "\n" " -c | --charge p[,j] Sets the price per page and per job to charge.\n" " Job price is optional.\n" " If both are to be set, separate them with a comma.\n" " Floating point and negative values are allowed.\n" " \n" " -g | --groups pg1[,pg2...] Adds or Remove the printer(s) to the printer \n" " groups pg1, pg2, etc... which must already exist.\n" " A printer group is just like a normal printer,\n" " only that it is usually unknown from the printing\n" " system. Create printer groups exactly the same\n" " way that you create printers, then add other \n" " printers to them with this option.\n" " Accounting is done on a printer and on all\n" " the printer groups it belongs to, quota checking\n" " is done on a printer and on all the printer groups\n" " it belongs to.\n" " If the --remove option below is not used, the \n" " default action is to add printers to the specified\n" " printer groups.\n" " \n" " -l | --list List informations about the printer(s) and the\n" " printers groups it is a member of.\n" " \n" " -r | --remove In combination with the --groups option above, \n" " remove printers from the specified printers groups.\n" " \n" " -s | --skipexisting In combination with the --add option above, tells\n" " pkprinters to not modify existing printers.\n" " \n" " -m | --maxjobsize s Sets the maximum job size allowed on the printer\n" " to s pages.\n" " \n" " -p | --passthrough Activate passthrough mode for the printer. In this\n" " mode, users are allowed to print without any impact\n" " on their quota or account balance.\n" " \n" " -n | --nopassthrough Deactivate passthrough mode for the printer.\n" " Without -p or -n, printers are created in \n" " normal mode, i.e. no passthrough.\n" " \n" " printer1 through printerN can contain wildcards if the --add option \n" " is not set.\n" " \n" "examples : \n" "\n" " $ pkprinters --add -D \"HP Printer\" --charge 0.05,0.1 hp2100 hp2200 hp8000\n" " \n" " Will create three printers named hp2100, hp2200 and hp8000.\n" " Their price per page will be set at 0.05 unit, and their price\n" " per job will be set at 0.1 unit. Units are in your own currency,\n" " or whatever you want them to mean.\n" " All of their descriptions will be set to the string \"HP Printer\".\n" " If any of these printers already exists, it will also be modified \n" " unless the -s|--skipexisting command line option is also used.\n" " \n" " $ pkprinters --delete \"*\"\n" " \n" " This will completely delete all printers and associated quota information,\n" " as well as their job history. USE WITH CARE !\n" " \n" " $ pkprinters --groups Laser,HP \"hp*\"\n" " \n" " This will put all printers which name matches \"hp*\" into printers groups \n" " Laser and HP, which MUST already exist.\n" " \n" " $ pkprinters --groups LexMark --remove hp2200\n" " \n" " This will remove the hp2200 printer from the LexMark printer group.\n" msgstr "" #, python-format msgid "Passthrough mode : %s" msgstr "" #, python-format msgid "Routed through PyKota : %s" msgstr "" msgid "YES" msgstr "" msgid "NO" msgstr "" msgid "in" msgstr "σε" msgid "Rerouting printers to CUPS" msgstr "" #, python-format msgid "Invalid charge amount value %s" msgstr "Μη αποδεκτό ποσό χρέωσης %s" #, python-format msgid "Invalid maximum job size value %s" msgstr "" #, python-format msgid "Printer %s already exists, skipping." msgstr "Ο εκτυπωτής %s υπάρχει ήδη, παράβλεψη." #, python-format msgid "Printer %s already exists, will be modified." msgstr "Ο εκτυπωτής %s υπάρχει ήδη, θα τροποποιηθεί." #, python-format msgid "Invalid printer name %s" msgstr "Μη αποδεκτό όνομα εκτυπωτή %s" msgid "You have to pass printer groups names on the command line" msgstr "Πρέπει να εισάγετε ονόματα ομάδων εκτυπωτών στη γραμμή εντολών" msgid "You have to pass printer names on the command line" msgstr "Πρέπει να εισάγετε ονόματα εκτυπωτών στη γραμμή εντολών" #, python-format msgid "" "pkrefund v%(__version__)s (c) %(__years__)s %(__author__)s\n" "\n" "Refunds jobs.\n" "\n" "command line usage :\n" "\n" " pkrefund [options] [filterexpr]\n" "\n" "options :\n" "\n" " -v | --version Prints pkrefund's version number then exits.\n" " -h | --help Prints this message then exits.\n" " \n" " -f | --force Doesn't ask for confirmation before refunding jobs.\n" " -r | --reason txt Sets textual information to explain the refunding.\n" "\n" " -l | --logo img Use the image as the receipt's logo. The logo will\n" " be drawn at the center top of the page. The default\n" " logo is /usr/share/pykota/logos/pykota.jpeg\n" "\n" " -p | --pagesize sz Sets sz as the page size. Most well known\n" " page sizes are recognized, like 'A4' or 'Letter'\n" " to name a few. The default size is A4.\n" "\n" " -n | --number N Sets the number of the first receipt. This number\n" " will automatically be incremented for each receipt.\n" "\n" " -o | --output f.pdf Defines the name of the PDF file which will contain\n" " the receipts. If not set, then no PDF file will\n" " be created. If set to '-', then --force is assumed,\n" " and the PDF document is sent to standard output.\n" "\n" " -u | --unit u Defines the name of the unit to use on the receipts.\n" " The default unit is 'Credits', optionally translated\n" " to your native language if it is supported by PyKota.\n" " \n" "\n" " Use the filter expressions to extract only parts of the \n" " datas. Allowed filters are of the form :\n" " \n" " key=value\n" " \n" " Allowed keys for now are : \n" " \n" " username User's name\n" " printername Printer's name\n" " hostname Client's hostname\n" " jobid Job's Id\n" " billingcode Job's billing code\n" " start Job's date of printing\n" " end Job's date of printing\n" " \n" " Dates formatting with 'start' and 'end' filter keys :\n" " \n" " YYYY : year boundaries\n" " YYYYMM : month boundaries\n" " YYYYMMDD : day boundaries\n" " YYYYMMDDhh : hour boundaries\n" " YYYYMMDDhhmm : minute boundaries\n" " YYYYMMDDhhmmss : second boundaries\n" " yesterday[+-NbDays] : yesterday more or less N days (e.g. : yesterday-15)\n" " today[+-NbDays] : today more or less N days (e.g. : today-15)\n" " tomorrow[+-NbDays] : tomorrow more or less N days (e.g. : tomorrow-15)\n" " now[+-NbDays] : now more or less N days (e.g. now-15)\n" "\n" " 'now' and 'today' are not exactly the same since today represents the first\n" " or last second of the day depending on if it's used in a start= or end=\n" " date expression. The utility to be able to specify dates in the future is\n" " a question which remains to be answered :-)\n" " \n" " Contrary to other PyKota management tools, wildcard characters are not \n" " expanded, so you can't use them.\n" " \n" "Examples :\n" "\n" " $ pkrefund --output /tmp/receipts.pdf jobid=503\n" " \n" " This will refund all jobs which Id is 503. BEWARE : installing CUPS\n" " afresh will reset the first job id at 1, so you probably want to use\n" " a more precise filter as explained below. A confirmation will\n" " be asked for each job to refund, and a PDF file named /tmp/receipts.pdf\n" " will be created which will contain printable receipts.\n" " \n" " $ pkrefund --reason \"Hardware problem\" jobid=503 start=today-7\n" " \n" " Refunds all jobs which id is 503 but which were printed during the\n" " past week. The reason will be marked as being an hardware problem.\n" " \n" " $ pkrefund --force username=jerome printername=HP2100\n" " \n" " Refunds all jobs printed by user jerome on printer HP2100. No\n" " confirmation will be asked.\n" " \n" " $ pkrefund --force printername=HP2100 start=200602 end=yesterday\n" " \n" " Refunds all jobs printed on printer HP2100 between February 1st 2006\n" " and yesterday. No confirmation will be asked.\n" msgstr "" msgid "Refunding receipt" msgstr "" msgid "Jobs refunded" msgstr "" msgid "Pages refunded" msgstr "" msgid "Amount refunded" msgstr "" msgid "Reason" msgstr "" msgid "Here's the receipt for the refunding of your print jobs" msgstr "" msgid "Generating receipts" msgstr "" msgid "Refunding for no reason is forbidden. Please use the --reason command line option." msgstr "" msgid "The PDF file containing the receipts will be sent to stdout. --force is assumed." msgstr "" #, python-format msgid "Date : %s" msgstr "" #, python-format msgid "JobId : %s" msgstr "" #, python-format msgid "User : %s" msgstr "" #, python-format msgid "Printer : %s" msgstr "" #, python-format msgid "Billing code : %s" msgstr "" #, python-format msgid "Pages : %i" msgstr "" #, python-format msgid "Credits : %.3f" msgstr "" #, python-format msgid "Title : %s" msgstr "" msgid "Refund (Y/N)" msgstr "" msgid "Y" msgstr "" msgid "N" msgstr "" #, python-format msgid "Refunded %i users for %i jobs, %i pages and %.3f credits" msgstr "" #, python-format msgid "" "pkturnkey v%(__version__)s (c) %(__years__)s %(__author__)s\n" "\n" "A turn key tool for PyKota. When launched, this command will initialize\n" "PyKota's database with all existing print queues and some or all users.\n" "For now, no prices or limits are set, so printing is fully accounted\n" "for, but not limited. That's why you'll probably want to also use\n" "edpykota once the database has been initialized.\n" "\n" "command line usage :\n" "\n" " pkturnkey [options] [printqueues names]\n" "\n" "options :\n" "\n" " -v | --version Prints pkturnkey version number then exits.\n" " -h | --help Prints this message then exits.\n" " \n" " -c | --doconf Give hints about what to put into pykota.conf\n" " \n" " -d | --dousers Manages users accounts as well.\n" " \n" " -D | --dogroups Manages users groups as well.\n" " Implies -d | --dousers.\n" " \n" " -e | --emptygroups Includes empty groups.\n" " \n" " -f | --force Modifies the database instead of printing what\n" " it would do.\n" " \n" " -u | --uidmin uid Only adds users whose uid is greater than or equal to\n" " uid. You can pass an username there as well, and its\n" " uid will be used automatically.\n" " If not set, 0 will be used automatically.\n" " Implies -d | --dousers.\n" " \n" " -U | --uidmax uid Only adds users whose uid is lesser than or equal to\n" " uid. You can pass an username there as well, and its\n" " uid will be used automatically.\n" " If not set, a large value will be used automatically.\n" " Implies -d | --dousers.\n" "\n" " -g | --gidmin gid Only adds groups whose gid is greater than or equal to\n" " gid. You can pass a groupname there as well, and its\n" " gid will be used automatically.\n" " If not set, 0 will be used automatically.\n" " Implies -D | --dogroups.\n" " \n" " -G | --gidmax gid Only adds groups whose gid is lesser than or equal to\n" " gid. You can pass a groupname there as well, and its\n" " gid will be used automatically.\n" " If not set, a large value will be used automatically.\n" " Implies -D | --dogroups.\n" "\n" "examples : \n" "\n" " $ pkturnkey --dousers --uidmin jerome\n" "\n" " Will simulate the initialization of PyKota's database will all existing\n" " printers and print accounts for all users whose uid is greater than\n" " or equal to jerome's one. Won't manage any users group.\n" " \n" " To REALLY initialize the database instead of simulating it, please\n" " use the -f | --force command line switch.\n" " \n" " You can limit the initialization to only a subset of the existing\n" " printers, by passing their names at the end of the command line.\n" msgstr "" #, python-format msgid "Printer %s is not managed by PyKota yet. Please modify printers.conf and restart CUPS." msgstr "" msgid "Please be patient..." msgstr "" msgid "Don't worry, the database WILL NOT BE MODIFIED." msgstr "" msgid "Please WORRY NOW, the database WILL BE MODIFIED." msgstr "" msgid "System users will have a print account as well !" msgstr "" #, python-format msgid "Unknown username %s : %s" msgstr "" msgid "System groups will have a print account as well !" msgstr "" #, python-format msgid "Unknown groupname %s : %s" msgstr "" msgid "Simulation terminated." msgstr "" msgid "Database initialized !" msgstr "" msgid "The --uidmin or --uidmax command line option implies --dousers as well." msgstr "" msgid "The --gidmin or --gidmax command line option implies --dogroups as well." msgstr "" msgid "The --dogroups command line option implies --dousers as well." msgstr "" #, python-format msgid "" "pkusers v%(__version__)s (c) %(__years__)s %(__author__)s\n" "\n" "An Users and Groups Manager for PyKota.\n" "\n" "command line usage :\n" "\n" " pkusers [options] user1 user2 user3 ... userN\n" " \n" "or : \n" "\n" " pkusers --groups [options] group1 group2 group3 ... groupN\n" "\n" "options :\n" "\n" " -v | --version Prints pkusers's version number then exits.\n" " -h | --help Prints this message then exits.\n" " \n" " -a | --add Adds users if they don't exist on the database.\n" " If they exist, they are modified unless\n" " -s|--skipexisting is also used.\n" " \n" " -d | --delete Deletes users from the quota storage.\n" "\n" " -e | --email addr Sets the email address for the users.\n" " If the addr parameter begins with @, then\n" " the username is prepended to addr to form\n" " a valid email address.\n" "\n" " -D | --description d Adds a textual description to users or groups.\n" " \n" " -g | --groups Edit users groups instead of users.\n" " \n" " -o | --overcharge f Sets the overcharging factor applied to the user \n" " when computing the cost of a print job. Positive or \n" " negative floating point values are allowed,\n" " this allows you to do some really creative\n" " things like giving money to an user whenever\n" " he prints. The number of pages in a print job\n" " is not modified by this coefficient, only the\n" " cost of the job for a particular user.\n" " Only users have such a coefficient.\n" " \n" " -i | --ingroups g1[,g2...] Puts the users into each of the groups\n" " listed, separated by commas. The groups\n" " must already exist in the Quota Storage.\n" " \n" " -L | --list Lists users or groups.\n" " \n" " -l | --limitby l Choose if the user/group is limited in printing \n" " by its account balance or by its page quota.\n" " The default value is 'quota'. Allowed values\n" " are 'quota' 'balance' 'noquota' 'noprint' \n" " and 'nochange' :\n" " \n" " - quota : limit by number of pages per printer.\n" " - balance : limit by number of credits in account.\n" " - noquota : no limit, accounting still done.\n" " - nochange : no limit, accounting not done. \n" " - noprint : printing is denied. \n" " NB : nochange and noprint are not supported for groups.\n" " \n" " -b | --balance b Sets the user's account balance to b. \n" " Account balance may be increase or decreased\n" " if b is prefixed with + or -.\n" " WARNING : when decreasing account balance,\n" " the total paid so far by the user is decreased\n" " too.\n" " Groups don't have a real balance, but the\n" " sum of their users' account balance.\n" " \n" " -C | --comment txt Defines some informational text to be associated\n" " with a change to an user's account balance.\n" " Only meaningful if -b | --balance is also used.\n" " \n" " \n" " -r | --remove In combination with the --ingroups option above, \n" " remove users from the specified users groups.\n" " \n" " -s | --skipexisting In combination with the --add option above, tells\n" " pkusers to not modify existing users.\n" " \n" " user1 through userN and group1 through groupN can use wildcards\n" " if the --add option is not set.\n" " \n" "examples : \n" "\n" " $ pkusers --add john paul george ringo/ringo@example.com\n" " \n" " This will add users john, paul, george and ringo to the quota\n" " database. User ringo's email address will also be set to \n" " 'ringo@example.com'\n" " \n" " $ pkusers --ingroups coders,it jerome\n" " \n" " User jerome is put into the groups \"coders\" and \"it\" which must\n" " already exist in the quota database.\n" " \n" " $ pkusers --limitby balance jerome\n" " \n" " This will tell PyKota to limit jerome by his account's balance\n" " when printing.\n" " \n" " $ pkusers --balance +10.0 --comment \"He paid with his blood !\" jerome\n" " \n" " This will increase jerome's account balance by 10.0 (in your\n" " own currency). You can decrease the account balance with a\n" " dash prefix, and set it to a fixed amount with no prefix.\n" " A comment will be stored for this balance change.\n" " \n" " $ pkusers --delete jerome rachel\n" " \n" " This will completely delete jerome and rachel from the quota\n" " database. All their quotas and jobs will be deleted too.\n" " \n" " $ pkusers --overcharge 2.5 poorstudent\n" " \n" " This will overcharge the poorstudent user by a factor of 2.5.\n" " \n" " $ pkusers --overcharge -1 jerome\n" " \n" " User jerome will actually earn money whenever he prints.\n" " \n" " $ pkusers --overcharge 0 boss\n" " \n" " User boss can print at will, it won't cost him anything because the\n" " cost of each print job will be multiplied by zero before charging\n" " his account.\n" "\n" " $ pkusers --email @example.com\n" "\n" " This will set the email address for each user to username@example.com\n" msgstr "" #, python-format msgid "Invalid email address %s" msgstr "Μη αποδεκτή διεύθυνση e-mail %s" #, python-format msgid "There's no %s matching %s" msgstr "" #, python-format msgid "Limited by : %s" msgstr "" #, python-format msgid "Account balance : %.2f" msgstr "" #, python-format msgid "Total paid so far : %.2f" msgstr "" #, python-format msgid "Overcharging factor : %.2f" msgstr "" #, python-format msgid "Group balance : %.2f" msgstr "" #, python-format msgid "Invalid limitby value %s" msgstr "Μη αποδεκτή τιμή limitby %s" #, python-format msgid "Invalid overcharge value %s" msgstr "" #, python-format msgid "Invalid balance value %s" msgstr "Μη αποδεκτή τιμή υπολοίπου %s" #, python-format msgid "There's no users group matching %s" msgstr "" #, python-format msgid "Unknown group %s" msgstr "" #, python-format msgid "Unknown user %s" msgstr "" #, python-format msgid "%s %s already exists, skipping." msgstr "" #, python-format msgid "%s %s already exists, will be modified." msgstr "" #, python-format msgid "Invalid name %s" msgstr "" msgid "You have to pass user groups names on the command line" msgstr "" #, python-format msgid "" "pykosd v%(__version__)s (c) %(__years__)s %(__author__)s\n" "\n" "An OSD quota monitor for PyKota.\n" "\n" "command line usage :\n" "\n" " pykosd [options]\n" "\n" "options :\n" "\n" " -v | --version Prints pykosd's version number then exits.\n" " -h | --help Prints this message then exits.\n" " \n" " -c | --color #rrggbb Sets the color to use for display as an hexadecimal\n" " triplet, for example #FF0000 is 100%% red.\n" " Defaults to 100%% green (#00FF00).\n" " \n" " -d | --duration d Sets the duration of the display in seconds. \n" " Defaults to 3 seconds.\n" " \n" " -f | --font f Sets the font to use for display. \n" " Defaults to the Python OSD library's default.\n" " \n" " -l | --loop n Sets the number of times the info will be displayed.\n" " Defaults to 0, which means loop forever.\n" " \n" " -s | --sleep s Sets the sleeping duration between two displays \n" " in seconds. Defaults to 180 seconds (3 minutes).\n" " \n" " \n" "examples : \n" "\n" " $ pykosd -s 60 --loop 5\n" " \n" " Will launch pykosd. Display will be refreshed every 60 seconds,\n" " and will last for 3 seconds (the default) each time. After five\n" " iterations, the program will exit.\n" msgstr "" #, python-format msgid "Invalid duration option %s" msgstr "Μη αποδεκτή παράμετρος διάρκειας %s" #, python-format msgid "Invalid loop option %s" msgstr "Μη αποδεκτή παράμετρος επανάληψης %s" #, python-format msgid "Invalid sleep option %s" msgstr "Μη αποδεκτή παράμετρος αναμονής %s" #, python-format msgid "Invalid color option %s" msgstr "Μη αποδεκτή παράμετρος χρώματος %s" #, python-format msgid "User %s doesn't exist in PyKota's database" msgstr "Ο χρήστης %s δεν υπάρχει στη βάση δεδομένων του PyKota" #, python-format msgid "Pages used on %s : %s" msgstr "Τυπωμένες σελίδες στον %s : %s" #, python-format msgid "PyKota Units left : %.2f" msgstr "Μονάδες PyKota που απομένουν : %.2f" msgid "Printing denied." msgstr "" msgid "Printing not limited." msgstr "" msgid "Printing not limited, no accounting." msgstr "" #, python-format msgid "" "pykotme v%(__version__)s (c) %(__years__)s %(__author__)s\n" "\n" "Gives print quotes to users.\n" "\n" "command line usage :\n" "\n" " pykotme [options] [files]\n" "\n" "options :\n" "\n" " -v | --version Prints pykotme's version number then exits.\n" " -h | --help Prints this message then exits.\n" " \n" " -P | --printer p Gives a quote for this printer only. Actually p can\n" " use wildcards characters to select only\n" " some printers. The default value is *, meaning\n" " all printers.\n" " You can specify several names or wildcards, \n" " by separating them with commas.\n" " \n" "examples : \n" "\n" " $ pykotme --printer apple file1.ps file2.ps\n" " \n" " This will give a print quote to the current user. The quote will show\n" " the price and size of a job consisting in file1.ps and file2.ps \n" " which would be sent to the apple printer.\n" " \n" " $ pykotme --printer apple,hplaser \n" msgstr "" "\n" "\n" "Παρακαλώ επικοινωνήστε με τον διαχειριστή συστήματος :\n" "\n" "\t%s - <%s>\n" #, python-format msgid "Unable to match user %s on printer %s, applying default policy (%s)" msgstr "Αδύνατη η εύρεση χρήστη %s στον εκτυπωτή %s, εφαρμογή ερήμην πολιτικής (%s)" #, python-format msgid "Unable to find user %s's account balance, applying default policy (%s) for printer %s" msgstr "Αδύνατη η εύρεση του υπολοίπου του χρήστη %s, εφαρμογή ερήμην πολιτικής (%s)για τον εκτυπωτή %s" #, python-format msgid "User %s will not be charged for printing." msgstr "" #, python-format msgid "Print Quota exceeded for group %s on printer %s" msgstr "Υπέρβαση ορίου εκτυπώσεων για την ομάδα %s στον εκτυπωτή %s" msgid "Print Quota Exceeded" msgstr "Υπέρβαση ορίου εκτυπώσεων" #, python-format msgid "Print Quota low for group %s on printer %s" msgstr "Χαμηλό υπόλοιπο εκτυπώσεων για την ομάδα %s στον εκτυπωτή %s" msgid "Print Quota Low" msgstr "Χαμηλό υπόλοιπο εκτυπώσεων" #, python-format msgid "Search base %s doesn't seem to exist. Probable misconfiguration. Please double check /etc/pykota/pykota.conf : %s" msgstr "Η βάση αναζήτησης %s δε φαίνεται να υπάρχει. Πιθανό λάθος στις ρυθμίσεις. Παρακαλώ ελέγξτε πάλι το αρχείο /etc/pykota/pykota.conf : %s" #, python-format msgid "Search for %s(%s) from %s(scope=%s) returned no answer." msgstr "Η αναζήτηση του %s(%s) από %s(εύρος=%s) δεν επέστρεψε αποτέλεσμα." #, python-format msgid "Problem adding LDAP entry (%s, %s)" msgstr "Σφάλμα κατά την προσθήκη καταχώρησης LDAP (%s, %s)" #, python-format msgid "Problem deleting LDAP entry (%s)" msgstr "Σφάλμα κατά την διαγραφή καταχώρησης LDAP (%s)" #, python-format msgid "Problem modifying LDAP entry (%s, %s)" msgstr "Σφάλμα κατά την τροποποίηση καταχώρησης LDAP (%s, %s)" #, python-format msgid "No pykotaAccountBalance object found for user %s. Did you create LDAP entries manually ?" msgstr "Δε βρέθηκε αντικείμενο pykotaAccountBalance για τον χρήστη %s. Δημιουργήσατε LDAP καταχωρήσεις χειρωνακτικά ;" msgid "Hidden because of privacy concerns" msgstr "" #, python-format msgid "Unable to find an existing objectClass %s entry with %s=%s to attach pykotaAccount objectClass" msgstr "Αδύνατη η εύρεση υπάρχουσας objectClass %s καταχώρησης με %s=%s για προσθήκη pykotaAccount objectClass" #, python-format msgid "%s. A new entry will be created instead." msgstr "" #, python-format msgid "Unable to find an existing entry to attach pykotaGroup objectclass %s" msgstr "Αδύνατη η εύρεση υπάρχουσας καταχώρησης για την προσθήκη pykotaGroup objectclass %s" msgid "Your version of python-mysqldb is too old. Please install a newer release." msgstr "" #, python-format msgid "A problem occured while reading printer %s's internal page counter." msgstr "Ένα πρόβλημα εμφανίστηκε κατά την ανάγνωση του εσωτερικού σελιδομετρητή του εκτυπωτή %s." #, python-format msgid "Retrieving printer %s's page counter from database instead." msgstr "Εξαγωγή σελιδομετρητή του εκτυπωτή %s από τη βάση δεδομένων εναλλακτικά." #, python-format msgid "Couldn't retrieve printer %s's internal page counter either before or after printing." msgstr "Αδύνατη η εξαγωγή του εσωτερικού σελιδομετρητή του εκτυπωτή %s είτε πριν είτε μετά την εκτύπωση." #, python-format msgid "Job's size forced to 1 page for printer %s." msgstr "Το μέγεθος της εργασίας τέθηκε σε 1 σελίδα για τον εκτυπωτή %s." #, python-format msgid "No previous job in database for printer %s." msgstr "Δεν υπάρχει προηγούμενη εργασία στη βάση δεδομένων για τον εκτυπωτή %s." #, python-format msgid "Inconsistent values for printer %s's internal page counter." msgstr "Ασυνάρτητες τιμές για τον εσωτερικό σελιδομετρητή του εκτυπωτή %s." #, python-format msgid "Unknown printer address in HARDWARE(%s) for printer %s" msgstr "Άγνωστη διεύθυνση εκτυπώτή στο HARDWARE(%s) για τον εκτυπωτή %s" #, python-format msgid "Launching HARDWARE(%s)..." msgstr "Εκτέλεση HARDWARE(%s)..." #, python-format msgid "SIGTERM was sent to hardware accounter %s (pid: %s)" msgstr "SIGTERM ελήφθη από τον σελιδομετρητή υλικού %s (pid: %s)" #, python-format msgid "Line [%s] skipped in accounter's output. Trying again..." msgstr "Η γραμμή [%s] παραβλέφθηκε στην έξοδο του σελιδομετρητή. Προσπάθεια ξανά..." #, python-format msgid "Hardware accounter %s exit code is %s" msgstr "Η τιμή εξόδου του σελιδομετρητή υλικού %s είναι %s" #, python-format msgid "Unable to query printer %s via HARDWARE(%s)" msgstr "Αδύνατη η επικοινωνία με τον εκτυπωτη %s μέσω HARDWARE(%s)" #, python-format msgid "Unable to precompute the job's size and ink coverage with the generic PDL analyzer : %s" msgstr "" #, python-format msgid "Problem during connection to %s:%s : %s" msgstr "Πρόβλημα κατά τη σύνδεση στον %s:%s : %s" #, python-format msgid "Problem while sending PJL query to %s:%s : %s" msgstr "Πρόβλημα κατά την αποστολή ερώτησης PJL στο %s:%s : %s" #, python-format msgid "Problem while receiving PJL answer from %s:%s : %s" msgstr "" #, python-format msgid "Waiting for printer %s to be printing..." msgstr "" #, python-format msgid "Waiting for printer %s's idle status to stabilize..." msgstr "Αναμονή για σταθεροποίηση της κατάστασης του εκτυπωτή %s..." #, python-format msgid "PJL querying stage interrupted. Using latest value seen for internal page counter (%s) on printer %s." msgstr "Η ερώτηση PJL διακόπηκε. Χρήση τελευταίας τιμής για τον εσωτερικό σελιδομετρητή (%s) του εκτυπωτή %s." #, python-format msgid "SNMP querying stage interrupted. Using latest value seen for internal page counter (%s) on printer %s." msgstr "Η ερώτηση SNMP διακόπηκε. Χρήση τελευταίας τιμής για τον εσωτερικό σελιδομετρητή (%s) του εκτυπωτή %s." #, python-format msgid "Network error while doing SNMP queries on printer %s : %s" msgstr "Σφάλμα δικτύου κατά την SNMP ερώτηση στον εκτυπωτή %s : %s" #, python-format msgid "SNMP message decoding error for printer %s : %s" msgstr "" #, python-format msgid "Problem encountered while doing SNMP queries on printer %s : %s" msgstr "Εμφανίστηκε πρόβλημα κατά την ερώτηση SNMP στον εκτυπωτή %s : %s" #, python-format msgid "Unable to precompute the job's size with the generic PDL analyzer : %s" msgstr "Αδύνατος ο προϋπολογισμός της εργασίας με τον αναλυτή PDL : %s" #, python-format msgid "Launching SOFTWARE(%s)..." msgstr "Εκτέλεση SOFTWARE(%s)..." #, python-format msgid "Unable to compute job size with accounter %s" msgstr "Αδύνατος ο υπολογισμός εργασίας με τον σελιδομετρητή %s" #, python-format msgid "Problem while waiting for software accounter pid %s to exit : %s" msgstr "Σφάλμα κατά την αναμονή τερματισμού του σελιδομετρητή λογισμικού pid %s : %s" #, python-format msgid "Software accounter %s exit code is %s" msgstr "Η τιμή εξόδου του σελιδομετρητή λογισμικού %s είναι %s" msgid "Totals may be inaccurate if some users are members of several groups." msgstr "Τα σύνολα μπορεί να είναι ανακριβή αν κάποιοι χρήστες είναι μέλη πολλών ομάδων." msgid "PyKota Data Dumper" msgstr "" msgid "Dump" msgstr "" msgid "Please click on the above button" msgstr "" msgid "Data Type" msgstr "" msgid "Output Format" msgstr "" msgid "Filter" msgstr "" msgid "Summarize" msgstr "" msgid "only for payments or history" msgstr "" msgid "PyKota Reports" msgstr "Αναφορές PyKota" msgid "Report" msgstr "Αναφορά" msgid "Printer" msgstr "Εκτυπωτής" msgid "User / Group names mask" msgstr "Μάσκα ονόματος Χρήστη / Ομάδας" msgid "Groups report" msgstr "Αναφορά ομάδων" msgid "Empty" msgstr "Άδειο" msgid "Action" msgstr "Ενέργεια" msgid "User" msgstr "Χρήστης" msgid "Hostname" msgstr "Όνομα κόμβου" msgid "JobId" msgstr "Εργασία" msgid "Number of pages" msgstr "" msgid "Cost" msgstr "" msgid "Copies" msgstr "Αντίγραφα" msgid "Number of bytes" msgstr "" msgid "Printer's internal counter" msgstr "" msgid "Options" msgstr "Παράμετροι" msgid "MD5Sum" msgstr "" msgid "Billing code" msgstr "" msgid "Precomputed number of pages" msgstr "" msgid "Precomputed cost" msgstr "" msgid "Pages details" msgstr "" msgid "(not supported yet)" msgstr "" msgid "Previous page" msgstr "Προηγούμενη σελίδα" msgid "PyKota Quotes" msgstr "" msgid "Quote" msgstr "" msgid "The exact cost of a print job can only be determined for a particular user. Please retry while logged-in." msgstr "" msgid "Ordering" msgstr "" #~ msgid "Impossible to add printer %s" #~ msgstr "Αδύνατη η προσθήκη του εκτυπωτή %s" #~ msgid "Prototype object %s not found in Quota Storage." #~ msgstr "Το πρότυπο αντικείμενο %s δε βρέθηκε στη βάση δεδομένων." #~ msgid "Prototype %s not found in Quota Storage for printer %s." #~ msgstr "Το πρότυπο %s δε βρέθηκε στη βάση δεδομένων για τον εκτυπωτή %s." #~ msgid "Undefined hard limit set to soft limit (%s) on printer %s." #~ msgstr "Αόριστο ανώτατο όριο ορίστηκε στο όριο προειδοποίησης(%s) στον εκτυπωτή %s." #~ msgid "Undefined soft limit set to hard limit (%s) on printer %s." #~ msgstr "Αόριστο όριο προειδοποίησης ορίστηκε στο ανώτατο όριο (%s) στον εκτυπωτή %s." #~ msgid "Invalid group name %s" #~ msgstr "Μη αποδεκτό όνομα ομάδας %s" #~ msgid "Invalid user name %s" #~ msgstr "Μη αποδεκτό όνομα χρήστη %s" #~ msgid "Quota not found for object %s on printer %s." #~ msgstr "Δε βρέθηκε όριο για το αντικείμενο %s στον εκτυπωτή %s." #~ msgid "Group %s not found in the PyKota Storage." #~ msgstr "Η ομάδα %s δε βρέθηκε στη βάση δεδομένων του PyKota." #~ msgid "File number %s unregistered twice from polling object, ignored." #~ msgstr "Το αρχείο με αριθμό %s διαγράφηκε δύο φορές από το αντικείμενο παρακολούθησης, παράβλεψη." #~ msgid "SIGTERM was sent to real backend %s (pid: %s)" #~ msgstr "SIGTERM ελήφθη από την πραγματική διεπαφή %s (pid: %s)" #~ msgid "CUPS backend %s died abnormally." #~ msgstr "Η διεπαφή CUPS %s τερματίστηκε απρόσμενα." #~ msgid "Software accounting already done in first pass. Ignoring." #~ msgstr "Σελιδομέτρηση λογισμικού έγινε ήδη στο πρώτο πέρασμα. Παράβλεψη." #~ msgid "Hardware accounting already done in first pass. Ignoring." #~ msgstr "Σελιδομέτρηση υλικού έγινε ήδη στο πρώτο πέρασμα. Παράβλεψη." #~ msgid "Invalid DeviceURI : %s" #~ msgstr "Μη αποδεκτό URI συσκευής: %s" #~ msgid "" #~ "\n" #~ "Please wait while pkhint analyzes your printing system's configuration..." #~ msgstr "" #~ "\n" #~ "Παρακαλώ περιμένετε όσο το pkhint αναλύει τις ρυθμίσεις του συστήματος εκτυπώσεων..." #~ msgid "Unknown device %s for printer %s" #~ msgstr "Άγνωστη συσκευή %s για τον εκτυπωτή %s" #~ msgid "" #~ "\n" #~ "Put the following lines into your /etc/pykota/pykota.conf file :\n" #~ msgstr "" #~ "\n" #~ "Εισάγετε τις ακόλουθες γραμμές στο αρχείο /etc/pykota/pykota.conf :\n" #~ msgid "# BEWARE : if software accounting is suggested, this doesn't mean" #~ msgstr "# ΠΡΟΣΟΧΗ : αν συνίσταται σελιδομέτρηση λογισμικού, αυτό δε σημαίνει" #~ msgid "# that hardware accounting wouldn't work, this only means that PyKota" #~ msgstr "# πως η σελιδομέτρηση υλικού δε δουλεύει, απλά ότι το PyKota" #~ msgid "# wasn't able to autodetect which hardware accounting method to use." #~ msgstr "# δε μπόρεσε να εντοπίσει τη μέθοδο σελιδομέτρησης υλικού." #~ msgid "JobSize" #~ msgstr "Σελίδες" #~ msgid "JobPrice" #~ msgstr "Τιμή" #~ msgid "JobBytes" #~ msgstr "Μέγεθος" #~ msgid "PageCounter" #~ msgstr "Σελιδομετρητής" #~ msgid "Printing system %s, args=%s" #~ msgstr "Σύστημα εκτυπώσεων %s, παράμετροι=%s" #~ msgid "Printer hostname undefined, set to 'localhost'" #~ msgstr "Αόριστο όνομα κόμβου εκτυπωτή, χρήση 'localhost'" #~ msgid "Printing system unknown, args=%s" #~ msgstr "Άγνωστο σύστημα εκτυπώσεων, παράμετροι=%s" #~ msgid "" #~ "autopykota v%s (c) %s %s\n" #~ "\n" #~ "A tool to automate user account creation and initial balance setting.\n" #~ "\n" #~ "THIS TOOL MUST NOT BE USED IF YOU WANT TO LIMIT YOUR USERS BY PAGE QUOTA !\n" #~ "\n" #~ "command line usage :\n" #~ "\n" #~ " THIS TOOL MUST NOT BE USED FROM THE COMMAND LINE BUT ONLY AS PART\n" #~ " OF AN external policy IN pykota.conf\n" #~ " \n" #~ " autopykota { -i | --initbalance value } \n" #~ "\n" #~ "options :\n" #~ "\n" #~ " -v | --version Prints autopykota's version number then exits.\n" #~ " -h | --help Prints this message then exits.\n" #~ " \n" #~ " -i | --initbalance b Sets the user's account initial balance value to b.\n" #~ " If the user already exists, actual balance is left\n" #~ " unmodified. If unset, the default value is 0.\n" #~ " \n" #~ "This program is free software; you can redistribute it and/or modify\n" #~ "it under the terms of the GNU General Public License as published by\n" #~ "the Free Software Foundation; either version 2 of the License, or\n" #~ "(at your option) any later version.\n" #~ "\n" #~ "This program is distributed in the hope that it will be useful,\n" #~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" #~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" #~ "GNU General Public License for more details.\n" #~ "\n" #~ "You should have received a copy of the GNU General Public License\n" #~ "along with this program; if not, write to the Free Software\n" #~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.\n" #~ "\n" #~ "Please e-mail bugs to: %s" #~ msgstr "" #~ "autopykota v%s (c) %s %s\n" #~ "\n" #~ "Εργαλείο για την αυτοματοποίηση δημιουργίας λογαριασμών χρηστών και αρχικού\n" #~ "υπολοίπου.\n" #~ "\n" #~ "ΑΥΤΟ ΤΟ ΕΡΓΑΛΕΙΟ ΔΕΝ ΠΡΕΠΕΙ ΝΑ ΧΡΗΣΙΜΟΠΟΙΕΙΤΑΙ ΓΙΑ ΤΟΝ ΠΕΡΙΟΡΙΣΜΟ ΤΟΥ ΟΡΙΟΥ\n" #~ "ΕΚΤΥΠΩΣΗΣ ΤΩΝ ΧΡΗΣΤΩΝ !\n" #~ "\n" #~ "χρήση γραμμής εντολών :\n" #~ "\n" #~ " ΤΟ ΕΡΓΑΛΕΙΟ ΑΥΤΟ ΔΕΝ ΠΡΕΠΕΙ ΝΑ ΧΡΗΣΙΜΟΠΟΙΕΙΤΑΙ ΑΠΟ ΤΗ ΓΡΑΜΜΗ ΕΝΤΟΛΩΝ, ΜΟΝΟ\n" #~ " ΩΣ ΜΕΡΟΣ ΜΙΑΣ εξωτερικής πολιτικής (external policy) ΣΤΟ pykota.conf\n" #~ " \n" #~ " autopykota { -i | --initbalance τιμή } \n" #~ "\n" #~ "παράμετροι :\n" #~ "\n" #~ " -v | --version Εμφανίζει την έκδοση του autopykota και τερματίζει.\n" #~ " -h | --help Εμφανίζει αυτό το μήνυμα και τερματίζει.\n" #~ " \n" #~ " -i | --initbalance b Θέτει αρχικό υπόλοιπο εκτυπώσεων στην τιμή του b.\n" #~ " Αν ο χρήστης προϋπάρχει, το υπόλοιπο παραμένει\n" #~ " όπως πριν. Αν δεν έχει οριστεί, μηδενίζεται.\n" #~ " \n" #~ "This program is free software; you can redistribute it and/or modify\n" #~ "it under the terms of the GNU General Public License as published by\n" #~ "the Free Software Foundation; either version 2 of the License, or\n" #~ "(at your option) any later version.\n" #~ "\n" #~ "This program is distributed in the hope that it will be useful,\n" #~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" #~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" #~ "GNU General Public License for more details.\n" #~ "\n" #~ "You should have received a copy of the GNU General Public License\n" #~ "along with this program; if not, write to the Free Software\n" #~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.\n" #~ "\n" #~ "Για τυχόν προβλήματα στείλτε e-mail στο: %s" #~ msgid "" #~ "pkhint v%s (c) %s %s\n" #~ "\n" #~ "A tool to give hints on what accounting method is best for each printer.\n" #~ "\n" #~ "command line usage :\n" #~ "\n" #~ " pkhint [options] [printer1 printer2 printer3 ... printerN] myfile.csv\n" #~ " \n" #~ " This dumps the history in a comma separated values file, for possible\n" #~ " use in a spreadsheet.\n" #~ " \n" #~ " $ dumpykota --data users --format xml -o users.xml\n" #~ " \n" #~ " Dumps all users datas to the users.xml file.\n" #~ " \n" #~ "This program is free software; you can redistribute it and/or modify\n" #~ "it under the terms of the GNU General Public License as published by\n" #~ "the Free Software Foundation; either version 2 of the License, or\n" #~ "(at your option) any later version.\n" #~ "\n" #~ "This program is distributed in the hope that it will be useful,\n" #~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" #~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" #~ "GNU General Public License for more details.\n" #~ "\n" #~ "You should have received a copy of the GNU General Public License\n" #~ "along with this program; if not, write to the Free Software\n" #~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.\n" #~ "\n" #~ "Please e-mail bugs to: %s" #~ msgstr "" #~ "dumpykota v%s (c) 2003, 2004, 2005 C@LL - Conseil Internet & Logiciels Libres\n" #~ "\n" #~ "Εμφανίζει το περιεχόμενο της βάσης δεδομένων PyKota.\n" #~ "\n" #~ "χρήση γραμμής εντολών :\n" #~ "\n" #~ " dumpykota [παράμετροι] \n" #~ "\n" #~ "παράμετροι :\n" #~ "\n" #~ " -v | --version Εμφανίζει την έκδοση του dumpykotaκαι τερματίζει.\n" #~ " -h | --help Εμφανίζει αυτό το μήνυμα και τερματίζει.\n" #~ " \n" #~ " -d | --data type Εμφανίζει δεδομένα 'τύπου'. Επιτρεπόμενοι τύποι :\n" #~ " \n" #~ " - history : εμφανίζει την ιστορία εργασιών.\n" #~ " - users : εμφανίζει χρήστες.\n" #~ " - groups : εμφανίζει ομάδες χρηστών.\n" #~ " - printers : εμφανίζει εκτυπωτές.\n" #~ " - upquotas : εμφανίζει όρια χρηστών.\n" #~ " - gpquotas : εμφανίζει όρια ομάδων χρηστών.\n" #~ " - payments : εμφανίζει εξοφλήσεις χρηστών.\n" #~ " - pmembers : εμφανίζει μέλη ομάδων εκτυπωτών.\n" #~ " - umembers : εμφανίζει μέλη ομάδων χρηστών.\n" #~ " \n" #~ " Προσοχή : η παράμετρος -d | --data είναι ΥΠΟΧΡΕΩΤΙΚΗ\n" #~ " \n" #~ " -f | --format fmt Εμφανίζει δεδομένα σε συγκεκριμένη μορφή. Όταν δεν\n" #~ " ορίζεται, η μορφή είναι η csv (τιμές διαχωρισμένες\n" #~ " με κόμματα). Όλα τα δεδομένα που εμφανίζονται\n" #~ " εσωκλείονται σε διπλά εισαγωγικά.\n" #~ " Επιτρεπόμενες μορφές δεδομένων είναι :\n" #~ " \n" #~ " - csv : διαχώριση δεδομένων με κόμματα\n" #~ " - ssv : διαχώριση δεδομένων με ελληνικό ερωτηματικό\n" #~ " - tsv : διαχώριση δεδομένων με στηλοθέτες (tabs)\n" #~ " - xml : εμφάνιση δεδομένων ως XML\n" #~ " \n" #~ " -o | --output όνομα Όλα τα δεδομένα θα γραφούν στο αρχείο με όνομα 'όνομα'\n" #~ " αντί να εμφανιστούν στην έξοδο της γραμμής εντολών.\n" #~ " Η ειδική τιμή '-' για όνομα αρχείου είναι η προεπιλογή\n" #~ " και σημαίνει εμφάνιση στην έξοδο της γραμμής εντολών.\n" #~ " ΠΡΟΣΟΧΗ: τα υπάρχοντα αρχεία αντικαθίστανται !\n" #~ " \n" #~ "Παραδείγματα :\n" #~ "\n" #~ " $ dumpykota --data history --format csv >myfile.csv\n" #~ " \n" #~ " Γράφει την ιστορία των εργασιών σε ένα αρχείο με διαχωριστικά κόμματα,\n" #~ " για πιθανή χρήση σε ένα λογιστικό φύλλο.\n" #~ " \n" #~ " $ dumpykota --data users --format xml -o users.xml\n" #~ " \n" #~ " Γράφει όλα τα δεδομένα των χρηστών στο αρχείο users.xml .\n" #~ " \n" #~ "This program is free software; you can redistribute it and/or modify\n" #~ "it under the terms of the GNU General Public License as published by\n" #~ "the Free Software Foundation; either version 2 of the License, or\n" #~ "(at your option) any later version.\n" #~ "\n" #~ "This program is distributed in the hope that it will be useful,\n" #~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" #~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" #~ "GNU General Public License for more details.\n" #~ "\n" #~ "You should have received a copy of the GNU General Public License\n" #~ "along with this program; if not, write to the Free Software\n" #~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.\n" #~ "\n" #~ "Για τυχόν προβλήματα στείλτε e-mail στο: %s" #~ msgid "Too many arguments, see help." #~ msgstr "Υπερβολικά πολλές παράμετροι, δείτε τη βοήθεια." #~ msgid "" #~ "edpykota v%s (c) 2003, 2004, 2005 C@LL - Conseil Internet & Logiciels Libres\n" #~ "A Print Quota editor for PyKota.\n" #~ "\n" #~ "command line usage :\n" #~ "\n" #~ " edpykota [options] user1 user2 ... userN\n" #~ " \n" #~ " edpykota [options] group1 group2 ... groupN\n" #~ "\n" #~ "options :\n" #~ "\n" #~ " -v | --version Prints edpykota's version number then exits.\n" #~ " -h | --help Prints this message then exits.\n" #~ " \n" #~ " -a | --add Adds users and/or printers if they don't \n" #~ " exist on the Quota Storage Server.\n" #~ " \n" #~ " -d | --delete Deletes users/groups from the quota storage.\n" #~ " Printers are never deleted.\n" #~ " \n" #~ " -c | --charge p[,j] Sets the price per page and per job to charge\n" #~ " for a particular printer. Job price is optional.\n" #~ " If both are to be set, separate them with a comma.\n" #~ " Floating point values are allowed.\n" #~ " \n" #~ " -i | --ingroups g1[,g2...] Puts the users into each of the groups\n" #~ " listed, separated by commas. The groups\n" #~ " must already exist in the Quota Storage.\n" #~ " \n" #~ " -u | --users Edit users print quotas, this is the default.\n" #~ " \n" #~ " -P | --printer p Edit quotas on printer p only. Actually p can\n" #~ " use wildcards characters to select only\n" #~ " some printers. The default value is *, meaning\n" #~ " all printers. \n" #~ " You can specify several names or wildcards, \n" #~ " by separating them with commas.\n" #~ " \n" #~ " -G | --pgroups pg1[,pg2...] Adds the printer(s) to the printer groups\n" #~ " pg1, pg2, etc... which must already exist.\n" #~ " A printer group is just like a normal printer,\n" #~ " only that it is usually unknown from the printing\n" #~ " system. Create printer groups exactly the same\n" #~ " way that you create printers, then add other \n" #~ " printers to them with this option.\n" #~ " Accounting is done on a printer and on all\n" #~ " the printer groups it belongs to, quota checking\n" #~ " is done on a printer and on all the printer groups\n" #~ " it belongs to.\n" #~ " \n" #~ " -g | --groups Edit users groups print quotas instead of users.\n" #~ " \n" #~ " -p | --prototype u|g Uses user u or group g as a prototype to set\n" #~ " print quotas\n" #~ " \n" #~ " -n | --noquota Doesn't set a quota but only does accounting.\n" #~ " \n" #~ " -r | --reset Resets the actual page counter for the user\n" #~ " or group to zero on the specified printers. \n" #~ " The life time page counter is kept unchanged.\n" #~ " \n" #~ " -R | --hardreset Resets the actual and life time page counters\n" #~ " for the user or group to zero on the specified \n" #~ " printers. \n" #~ " \n" #~ " -l | --limitby l Choose if the user/group is limited in printing \n" #~ " by its account balance or by its page quota.\n" #~ " The default value is 'quota'. Allowed values\n" #~ " are 'quota' 'balance' 'quota-then-balance' and\n" #~ " 'balance-then-quota'.\n" #~ " WARNING : quota-then-balance and balance-then-quota\n" #~ " are not yet implemented.\n" #~ " \n" #~ " -b | --balance b Sets the user's account balance to b. \n" #~ " Account balance may be increase or decreased\n" #~ " if b is prefixed with + or -.\n" #~ " WARNING : when decreasing account balance,\n" #~ " the total paid so far by the user is decreased\n" #~ " too.\n" #~ " Groups don't have a real balance, but the\n" #~ " sum of their users' account balance.\n" #~ " \n" #~ " -S | --softlimit sl Sets the quota soft limit to sl pages. \n" #~ " \n" #~ " -H | --hardlimit hl Sets the quota hard limit to hl pages.\n" #~ " \n" #~ " user1 through userN and group1 through groupN can use wildcards\n" #~ " if the --add option is not set.\n" #~ " \n" #~ "examples : \n" #~ "\n" #~ " $ edpykota --add -p jerome john paul george ringo/ringo@example.com\n" #~ " \n" #~ " This will add users john, paul, george and ringo to the quota\n" #~ " database, and set their print quotas to the same values than user \n" #~ " jerome. User jerome must already exist.\n" #~ " User ringo's email address will also be set to 'ringo@example.com'\n" #~ " \n" #~ " $ edpykota --printer lp -S 50 -H 60 jerome\n" #~ " \n" #~ " This will set jerome's print quota on the lp printer to a soft limit\n" #~ " of 50 pages, and a hard limit of 60 pages. If either user jerome or\n" #~ " printer lp doesn't exist on the Quota Storage Server then nothing is done.\n" #~ "\n" #~ " $ edpykota --add --printer lp --ingroups coders,it -S 50 -H 60 jerome\n" #~ " \n" #~ " Same as above, but if either user jerome or printer lp doesn't exist \n" #~ " on the Quota Storage Server they are automatically added. Also\n" #~ " user jerome is put into the groups \"coders\" and \"it\" which must\n" #~ " already exist in the Quota Storage.\n" #~ " \n" #~ " $ edpykota -g -S 500 -H 550 financial support \n" #~ " \n" #~ " This will set print quota soft limit to 500 pages and hard limit\n" #~ " to 550 pages for groups financial and support on all printers.\n" #~ " \n" #~ " $ edpykota --reset jerome \"jo*\"\n" #~ " \n" #~ " This will reset jerome's page counter to zero on all printers, as\n" #~ " well as every user whose name begins with 'jo'.\n" #~ " Their life time page counter on each printer will be kept unchanged.\n" #~ " You can also reset the life time page counters by using the\n" #~ " --hardreset | -R command line option.\n" #~ " \n" #~ " $ edpykota --printer hpcolor --noquota jerome\n" #~ " \n" #~ " This will tell PyKota to not limit jerome when printing on the \n" #~ " hpcolor printer. All his jobs will be allowed on this printer, but \n" #~ " accounting of the pages he prints will still be kept.\n" #~ " Print Quotas for jerome on other printers are unchanged.\n" #~ " \n" #~ " $ edpykota --limitby balance jerome\n" #~ " \n" #~ " This will tell PyKota to limit jerome by his account's balance\n" #~ " when printing.\n" #~ " \n" #~ " $ edpykota --balance +10.0 jerome\n" #~ " \n" #~ " This will increase jerome's account balance by 10.0 (in your\n" #~ " own currency). You can decrease the account balance with a\n" #~ " dash prefix, and set it to a fixed amount with no prefix.\n" #~ " \n" #~ " $ edpykota --delete jerome rachel\n" #~ " \n" #~ " This will completely delete jerome and rachel from the Quota Storage\n" #~ " database. All their quotas and jobs will be deleted too.\n" #~ " \n" #~ " $ edpykota --printer lp --charge 0.1\n" #~ " \n" #~ " This will set the page price for printer lp to 0.1. Job price\n" #~ " will not be changed.\n" #~ " \n" #~ " $ edpykota --printer hplj1,hplj2 --pgroups Laser,HP\n" #~ " \n" #~ " This will put printers hplj1 and hplj2 in printers groups Laser and HP.\n" #~ " When printing either on hplj1 or hplj2, print quota will also be \n" #~ " checked and accounted for on virtual printers Laser and HP.\n" #~ "\n" #~ "This program is free software; you can redistribute it and/or modify\n" #~ "it under the terms of the GNU General Public License as published by\n" #~ "the Free Software Foundation; either version 2 of the License, or\n" #~ "(at your option) any later version.\n" #~ "\n" #~ "This program is distributed in the hope that it will be useful,\n" #~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" #~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" #~ "GNU General Public License for more details.\n" #~ "\n" #~ "You should have received a copy of the GNU General Public License\n" #~ "along with this program; if not, write to the Free Software\n" #~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.\n" #~ "\n" #~ "Please e-mail bugs to: %s" #~ msgstr "" #~ "edpykota v%s (c) 2003, 2004, 2005 C@LL - Conseil Internet & Logiciels Libres\n" #~ "Διορθωτής Ορίου Εκτυπώσεων για το PyKota.\n" #~ "\n" #~ "χρήση γραμμής εντολών :\n" #~ "\n" #~ " edpykota [παράμετροι] χρήστης1 χρήστης2 ... χρήστηςN\n" #~ " \n" #~ " edpykota [παράμετροι] ομάδα1 ομάδα2 ... ομάδαN\n" #~ "\n" #~ "παράμετροι :\n" #~ "\n" #~ " -v | --version Εμφανίζει την έκδοση του edpykotaκαι τερματίζει.\n" #~ " -h | --help Εμφανίζει αυτό το μήνυμα και τερματίζει.\n" #~ " \n" #~ " -a | --add Προσθέτει χρήστες και/ή εκτυπωτές αν δεν υπάρχουν\n" #~ " στη Βάση Δεδομένων Ορίων Εκτύπωσης.\n" #~ " \n" #~ " -d | --delete Αφαιρεί χρήστες/ομάδες από τη βάση δεδομένων των\n" #~ " Ορίων εκτύπωσης. Οι εκτυπωτές δεν αφαιρούνται.\n" #~ " \n" #~ " -c | --charge p[,j] Ορίζει την τιμή χρέωσης ανά σελίδα και ανά εργασία\n" #~ " για συγκεκριμένο εκτυπωτή. Η τιμή της εργασίας είναι\n" #~ " προαιρετική. Αν οριστούν και οι δύο, χωρίστε τις με ένα\n" #~ " κόμμα. Επιτρέπονται δεκαδικοί αριθμοί.\n" #~ " \n" #~ " -i | --ingroups g1[,g2...] Προσθέτει τους χρήστες σε καθεμία από τις ομάδες\n" #~ " που δίνονται χωρισμένες με κόμμα. Οι ομάδες\n" #~ " πρέπει να υπάρχουν ήδη στη βάση δεδομένων.\n" #~ " \n" #~ " -u | --users Μεταβάλλει τα όρια εκτυπώσεων χρηστών. Αυτή είναι η\n" #~ " προεπιλεγμένη εργασία.\n" #~ " \n" #~ " -P | --printer p Μεταβάλλει όρια εκτυπώσεων μόνο για τον εκτυπωτή p.\n" #~ " Η παράμετρος p μπορεί να περιέχει μπαλαντέρ για να\n" #~ " επιλεγούν μόνο κάποιοι εκτυπωτές. Η προεπιλεγμένη τιμή\n" #~ " είναι *, δηλαδή όλοι οι εκτυπωτές. \n" #~ " Μπορείτε να ορίσετε πολλά ονόματα ή μπαλαντέρ, \n" #~ " διαχωρίζοντάς τα με κόμματα.\n" #~ " \n" #~ " -G | --pgroups pg1[,pg2...] Προσθέτει τον/τους εκτυπωτή/ές στις ομάδες\n" #~ " εκτυπωτών pg1, pg2, κ.λ.π που πρέπει να προϋπάρχουν.\n" #~ " Μια ομάδα εκτυπωτών συμπεριφέρεται ως εκτυπωτής, μόνο\n" #~ " που συνήθως είναι άγνωστη στο σύστημα εκτυπώσεων.\n" #~ " Δημιουργήστε ομάδες εκτυπωτών με τον ίδιο τρόπο που\n" #~ " δημιουργείτε εκτυπωτές, μετά προσθέστε άλλους εκτυπωτές\n" #~ " σε αυτές με αυτή την παράμετρο.\n" #~ " Η σελιδομέτρηση και ο έλεγχος ορίων γίνονται για τον\n" #~ " εκτυπωτή και για όλες τις ομάδες εκτυπωτών στις οποίες\n" #~ " ανήκει.\n" #~ " \n" #~ " -g | --groups Μεταβάλλει όρια εκτυπώσεων για ομάδες χρηστών αντί για\n" #~ " απλούς χρήστες.\n" #~ " \n" #~ " -p | --prototype u|g Χρησιμοποιεί τον χρήστη u ή την ομάδα g ως πρότυπο για\n" #~ " τον ορισμό ορίων εκτυπώσεων\n" #~ " \n" #~ " -n | --noquota Δεν θέτει όριο εκτυπώσεων, μόνο κάνει σελιδομέτρηση.\n" #~ " \n" #~ " -r | --reset Μηδενίζει το μετρητή σελίδων για τον χρήστη ή την\n" #~ " ομάδα για τους συγκεκριμένους εκτυπωτές. \n" #~ " Ο μόνιμος σελιδομετρητής δε μεταβάλλεται.\n" #~ " \n" #~ " -R | --hardreset Μηδενίζει τον πραγματικό και τον μόνιμο σελιδομετρητή\n" #~ " για τον χρήστη ή την ομάδα στους συγκεκριμένους \n" #~ " εκτυπωτές. \n" #~ " \n" #~ " -l | --limitby l Επιλογή αν ο χρήστης/ομάδα περιορίζεται στις εκτυπώσεις από το υπόλοιπο του λογαριασμού του ή το όριο εκτυπώσεών του.\n" #~ " Η προεπιλεγμένη τιμή είναι 'quota' (όριο εκτυπώσεων).\n" #~ " Επιτρεπτές τιμές είναι 'quota' (όριο εκτυπώσεων),\n" #~ " 'balance' (υπόλοιπο λογαριασμού), 'quota-then-balance' (πρώτα\n" #~ " όριο μετά υπόλοιπο) και 'balance-then-quota' (πρώτα υπόλοιπο\n" #~ " μετά όριο). ΠΡΟΣΟΧΗ : Οι επιλογές quota-then-balance και balance-then-quota\n" #~ " δεν έχουν υλοποιηθεί ακόμη.\n" #~ " \n" #~ " -b | --balance b Ορίζει το υπόλοιπο εκτυπώσεων ενός λογαριασμού χρήστη σε b.\n" #~ " Το υπόλοιπο εκτυπώσεων μπορεί να αυξηθεί ή να μειωθεί αν δοθεί\n" #~ " πριν από το b ένα πρόσημο + ή -.\n" #~ " ΠΡΟΣΟΧΗ : όταν μειώνετε το υπόλοιπο εκτυπώσεων, μειώνεται και,\n" #~ " το ποσό που έχει εξοφληθεί από το χρήστη μέχρι εκείνη τη\n" #~ " στιγμή.\n" #~ " Οι ομάδες δεν έχουν πραγματικό υπόλοιπο, αλλά το άθροισμα των\n" #~ " υπολοίπων των χρηστών τους.\n" #~ " \n" #~ " -S | --softlimit sl Θέτει το όριο προειδοποίησης σε sl σελίδες\n" #~ " \n" #~ " -H | --hardlimit hl Θέτει το ανώτατο όριο εκτυπώσεων σε hl σελίδες.\n" #~ " \n" #~ " οι παράμετροι χρήστης1 εως χρήστηςN και ομάδα1 εως ομάδαN μπορούν να χρησιμοποιούν\n" #~ " μπαλαντέρ αν δεν οριστεί η παράμετρος --add.\n" #~ " \n" #~ "παραδείγματα : \n" #~ "\n" #~ " $ edpykota --add -p jerome john paul george ringo/ringo@example.com\n" #~ " \n" #~ " Προσθέτει τους χρήστες john, paul, george και ringo στη βάση\n" #~ " δεδομένων, και θέτει τα όρια εκτύπωσής τους στις ίδιες τιμές \n" #~ " με του χρήστη jerome. Ο χρήστης jerome πρέπει να προϋπάρχει.\n" #~ " Επίσης ορίζεται η email διεύθυνση του χρήστη ringo σε\n" #~ " 'ringo@example.com'\n" #~ " \n" #~ " $ edpykota --printer lp -S 50 -H 60 jerome\n" #~ " \n" #~ " Θέτει τα όρια του χρήστη jerome στον εκτυπωτή lp με όριο προειδοποίησης\n" #~ " 50 σελίδων, και ανώτατο όριο 60 σελίδων. Αν είτε ο χρήστης jerome είτε\n" #~ " ο εκτυπωτής lp δεν υπάρχει στη βάση δεδομένων, καμία μεταβολή δεν εκτελείται.\n" #~ "\n" #~ " $ edpykota --add --printer lp --ingroups coders,it -S 50 -H 60 jerome\n" #~ " \n" #~ " Όπως και παραπάνω, αλλά αν δεν υπάρχουν είτε ο χρήστης jerome είτε ο \n" #~ " εκτυπωτής lp στη βάση δεδομένων, προστίθενται αυτόματα. Επίσης ο χρήστης\n" #~ " jerome εισάγεται στις ομάδες \"coders\" και \"it\" που πρέπει να\n" #~ " προϋπάρχουν στη βάση δεδομένων.\n" #~ " \n" #~ " $ edpykota -g -S 500 -H 550 financial support \n" #~ " \n" #~ " Θέτει το όριο προειδοποίησης σε 500 σελίδες και το ανώτατο όριο σε 550\n" #~ " σελίδες για τις ομάδες financial και support σε όλους τους εκτυπωτές.\n" #~ " \n" #~ " $ edpykota --reset jerome \"jo*\"\n" #~ " \n" #~ " Μηδενίζει τους μετρητές σελίδων του χρήστη jerome και των χρηστών των οποίων\n" #~ " το όνομα αρχίζει με 'jo' σε όλους τους εκτυπωτές.\n" #~ " Ο μόνιμος μετρητής τους σε κάθε εκτυπωτή παραμένει αμετάβλητος.\n" #~ " Μπορείτε επίσης να μηδενίσετε τους μόνιμους μετρητές χρησιμοποιώντας την\n" #~ " παράμετρο --hardreset | -R .\n" #~ " \n" #~ " $ edpykota --printer hpcolor --noquota jerome\n" #~ " \n" #~ " Αφαιρεί το όριο εκτυπώσεων του χρήστη jerome για τον εκτυπωτή hpcolor. \n" #~ " Όλες οι εργασίες του θα επιτρέπονται στον εκτυπωτή, αλλά η σελιδομέτρηση \n" #~ " των εκτυπώσεών του θα γίνεται κανονικά.\n" #~ " Τα όρια εκτυπώσεων του jerome σε άλλους εκτυπωτές παραμένουν αμετάβλητα.\n" #~ " \n" #~ " $ edpykota --limitby balance jerome\n" #~ " \n" #~ " Περιορίζει το χρήστη jerome με βάση το υπόλοιπο εκτυπώσεών του.\n" #~ " \n" #~ " $ edpykota --balance +10.0 jerome\n" #~ " \n" #~ " Αυξάνει το υπόλοιπο του λογαριασμού jerome κατά 10.0 μονάδες (στο τρέχον\n" #~ " νόμισμα). Μπορείτε να μειώσετε το υπόλοιπο με το πρόσημο (-) ή να το\n" #~ " θέσετε σε κάποιο σταθερό ποσό χωρίς πρόσημο.\n" #~ " \n" #~ " $ edpykota --delete jerome rachel\n" #~ " \n" #~ " Αφαιρεί εντελώς τους χρήστες jerome και rachel από τη βάση δεδομένων.\n" #~ " Όλα τα όρια εκτυπώσεων και η ιστορία εργασιών θα διαγραφεί επίσης.\n" #~ " \n" #~ " $ edpykota --printer lp --charge 0.1\n" #~ " \n" #~ " Θέτε την τιμή της σελίδας για τον εκτυπωτή σε 0.1. Η τιμή της εργασίας\n" #~ " δε θα μεταβληθεί.\n" #~ " \n" #~ " $ edpykota --printer hplj1,hplj2 --pgroups Laser,HP\n" #~ " \n" #~ " Αναθέτει τους εκτυπωτές hplj1 και hplj2 στις ομάδες εκτυπωτών Laser και HP.\n" #~ " Όταν γίνεται εκτύπωση είτε στον hplj1 είτε hplj2, τα όρια εκτυπώσεων θα\n" #~ " ελεγχθούν και θα ενημερωθούν για τους εικονικούς εκτυπωτές Laser και HP.\n" #~ "\n" #~ "This program is free software; you can redistribute it and/or modify\n" #~ "it under the terms of the GNU General Public License as published by\n" #~ "the Free Software Foundation; either version 2 of the License, or\n" #~ "(at your option) any later version.\n" #~ "\n" #~ "This program is distributed in the hope that it will be useful,\n" #~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" #~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" #~ "GNU General Public License for more details.\n" #~ "\n" #~ "You should have received a copy of the GNU General Public License\n" #~ "along with this program; if not, write to the Free Software\n" #~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.\n" #~ "\n" #~ "Για τυχόν προβλήματα στείλτε e-mail στο: %s" #~ msgid "Group used soft hard balance grace total paid" #~ msgstr "Ομάδα τρέχον προειδ. ανώτατο υπόλοιπο χάρη σύνολο πληρωμένα" #~ msgid "User used soft hard balance grace total paid" #~ msgstr "Χρήστης τρέχον προειδ. ανώτατο υπόλοιπο χάρη σύνολο πληρωμένα" #~ msgid "Waiting for printer %s to be idle or printing..." #~ msgstr "Αναμονή για κατάσταση ανενεργή ή εκτύπωσης στον εκτυπωτή %s..."