<?php
/***************************************************************
 *  Copyright notice
 *
 *  (c) 1999-2011 Kasper Skårhøj (kasperYYYY@typo3.com)
 *  All rights reserved
 *
 *  This script is part of the TYPO3 project. The TYPO3 project is
 *  free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2 of the License, or
 *  (at your option) any later version.
 *
 *  The GNU General Public License can be found at
 *  http://www.gnu.org/copyleft/gpl.html.
 *  A copy is found in the textfile GPL.txt and important notices to the license
 *  from the author is found in LICENSE.txt distributed with these scripts.
 *
 *
 *  This script is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  This copyright notice MUST APPEAR in all copies of the script!
 ***************************************************************/
/**
 * Contains the reknown class "t3lib_div" with general purpose functions
 *
 * $Id$
 * Revised for TYPO3 3.6 July/2003 by Kasper Skårhøj
 * XHTML compliant
 * Usage counts are based on search 22/2 2003 through whole source including tslib/
 *
 * @author	Kasper Skårhøj <kasperYYYY@typo3.com>
 */
/**
 * [CLASS/FUNCTION INDEX of SCRIPT]
 *
 *
 *
 *  232: class t3lib_div
 *
 *			  SECTION: GET/POST Variables
 *  262:	 function _GP($var)
 *  280:	 function _GET($var=NULL)
 *  297:	 function _POST($var=NULL)
 *  313:	 function _GETset($inputGet,$key='')
 *  336:	 function GPvar($var,$strip=0)
 *  353:	 function GParrayMerged($var)
 *
 *			  SECTION: IMAGE FUNCTIONS
 *  397:	 function gif_compress($theFile, $type)
 *  425:	 function png_to_gif_by_imagemagick($theFile)
 *  450:	 function read_png_gif($theFile,$output_png=0)
 *
 *			  SECTION: STRING FUNCTIONS
 *  499:	 function fixed_lgd($string,$origChars,$preStr='...')
 *  524:	 function fixed_lgd_pre($string,$chars)
 *  538:	 function fixed_lgd_cs($string,$chars)
 *  555:	 function breakTextForEmail($str,$implChar=LF,$charWidth=76)
 *  574:	 function breakLinesForEmail($str,$implChar=LF,$charWidth=76)
 *  610:	 function cmpIP($baseIP, $list)
 *  626:	 function cmpIPv4($baseIP, $list)
 *  668:	 function cmpIPv6($baseIP, $list)
 *  711:	 function IPv6Hex2Bin ($hex)
 *  726:	 function normalizeIPv6($address)
 *  782:	 function validIPv6($ip)
 *  805:	 function cmpFQDN($baseIP, $list)
 *  835:	 function inList($list,$item)
 *  847:	 function rmFromList($element,$list)
 *  863:	 function expandList($list)
 *  894:	 function intInRange($theInt,$min,$max=2000000000,$zeroValue=0)
 *  910:	 function intval_positive($theInt)
 *  923:	 function int_from_ver($verNumberStr)
 *  934:	 function compat_version($verNumberStr)
 *  952:	 function md5int($str)
 *  965:	 function shortMD5($input, $len=10)
 *  978:	 function uniqueList($in_list, $secondParameter=NULL)
 *  992:	 function split_fileref($fileref)
 * 1030:	 function dirname($path)
 * 1046:	 function modifyHTMLColor($color,$R,$G,$B)
 * 1066:	 function modifyHTMLColorAll($color,$all)
 * 1077:	 function rm_endcomma($string)
 * 1090:	 function danish_strtoupper($string)
 * 1105:	 function convUmlauts($str)
 * 1118:	 function testInt($var)
 * 1130:	 function isFirstPartOfStr($str,$partStr)
 * 1146:	 function formatSize($sizeInBytes,$labels='')
 * 1181:	 function convertMicrotime($microtime)
 * 1195:	 function splitCalc($string,$operators)
 * 1217:	 function calcPriority($string)
 * 1258:	 function calcParenthesis($string)
 * 1284:	 function htmlspecialchars_decode($value)
 * 1299:	 function deHSCentities($str)
 * 1312:	 function slashJS($string,$extended=0,$char="'")
 * 1325:	 function rawUrlEncodeJS($str)
 * 1337:	 function rawUrlEncodeFP($str)
 * 1348:	 function validEmail($email)
 * 1363:	 function formatForTextarea($content)
 *
 *			  SECTION: ARRAY FUNCTIONS
 * 1394:	 function inArray($in_array,$item)
 * 1411:	 function intExplode($delim, $string)
 * 1430:	 function revExplode($delim, $string, $count=0)
 * 1450:	 function trimExplode($delim, $string, $onlyNonEmptyValues=0)
 * 1472:	 function uniqueArray($valueArray)
 * 1484:	 function removeArrayEntryByValue($array,$cmpValue)
 * 1513:	 function implodeArrayForUrl($name,$theArray,$str='',$skipBlank=0,$rawurlencodeParamName=0)
 * 1538:	 function explodeUrl2Array($string,$multidim=FALSE)
 * 1564:	 function compileSelectedGetVarsFromArray($varList,$getArray,$GPvarAlt=1)
 * 1587:	 function addSlashesOnArray(&$theArray)
 * 1611:	 function stripSlashesOnArray(&$theArray)
 * 1633:	 function slashArray($arr,$cmd)
 * 1650:	 function array_merge_recursive_overrule($arr0,$arr1,$notAddKeys=0,$includeEmtpyValues=true)
 * 1683:	 function array_merge($arr1,$arr2)
 * 1696:	 function csvValues($row,$delim=',',$quote='"')
 *
 *			  SECTION: HTML/XML PROCESSING
 * 1738:	 function get_tag_attributes($tag)
 * 1775:	 function split_tag_attributes($tag)
 * 1809:	 function implodeAttributes($arr,$xhtmlSafe=FALSE,$dontOmitBlankAttribs=FALSE)
 * 1836:	 function implodeParams($arr,$xhtmlSafe=FALSE,$dontOmitBlankAttribs=FALSE)
 * 1851:	 function wrapJS($string, $linebreak=TRUE)
 * 1882:	 function xml2tree($string,$depth=999)
 * 1969:	 function array2xml($array,$NSprefix='',$level=0,$docTag='phparray',$spaceInd=0, $options=array(),$stackData=array())
 * 2088:	 function xml2array($string,$NSprefix='',$reportDocTag=FALSE)
 * 2198:	 function xmlRecompileFromStructValArray($vals)
 * 2242:	 function xmlGetHeaderAttribs($xmlData)
 *
 *			  SECTION: FILES FUNCTIONS
 * 2275:	 function getURL($url, $includeHeader=0)
 * 2342:	 function writeFile($file,$content)
 * 2367:	 function fixPermissions($file)
 * 2384:	 function writeFileToTypo3tempDir($filepath,$content)
 * 2427:	 function mkdir($theNewFolder)
 * 2446:	 function mkdir_deep($destination,$deepDir)
 * 2468:	 function get_dirs($path)
 * 2493:	 function getFilesInDir($path,$extensionList='',$prependPath=0,$order='')
 * 2547:	 function getAllFilesAndFoldersInPath($fileArr,$path,$extList='',$regDirs=0,$recursivityLevels=99)
 * 2570:	 function removePrefixPathFromList($fileArr,$prefixToRemove)
 * 2586:	 function fixWindowsFilePath($theFile)
 * 2598:	 function resolveBackPath($pathStr)
 * 2626:	 function locationHeaderUrl($path)
 *
 *			  SECTION: DEBUG helper FUNCTIONS
 * 2666:	 function debug_ordvalue($string,$characters=100)
 * 2683:	 function view_array($array_in)
 * 2711:	 function print_array($array_in)
 * 2726:	 function debug($var="",$brOrHeader=0)
 * 2757:	 function debug_trail()
 * 2779:	 function debugRows($rows,$header='')
 *
 *			  SECTION: SYSTEM INFORMATION
 * 2857:	 function getThisUrl()
 * 2873:	 function linkThisScript($getParams=array())
 * 2897:	 function linkThisUrl($url,$getParams=array())
 * 2920:	 function getIndpEnv($getEnvName)
 * 3113:	 function milliseconds()
 * 3125:	 function clientInfo($useragent='')
 *
 *			  SECTION: TYPO3 SPECIFIC FUNCTIONS
 * 3212:	 function getFileAbsFileName($filename,$onlyRelative=1,$relToTYPO3_mainDir=0)
 * 3248:	 function validPathStr($theFile)
 * 3259:	 function isAbsPath($path)
 * 3270:	 function isAllowedAbsPath($path)
 * 3287:	 function verifyFilenameAgainstDenyPattern($filename)
 * 3305:	 function upload_copy_move($source,$destination)
 * 3331:	 function upload_to_tempfile($uploadedFileName)
 * 3349:	 function unlink_tempfile($uploadedTempFileName)
 * 3365:	 function tempnam($filePrefix)
 * 3379:	 function stdAuthCode($uid_or_record,$fields='',$codeLength=8)
 * 3410:	 function cHashParams($addQueryParams)
 * 3433:	 function hideIfNotTranslated($l18n_cfg_fieldValue)
 * 3448:	 function readLLfile($fileRef,$langKey)
 * 3472:	 function readLLXMLfile($fileRef,$langKey)
 * 3589:	 function llXmlAutoFileName($fileRef,$language)
 * 3633:	 function loadTCA($table)
 * 3653:	 function resolveSheetDefInDS($dataStructArray,$sheet='sDEF')
 * 3686:	 function resolveAllSheetsInDS($dataStructArray)
 * 3715:	 function callUserFunction($funcName,&$params,&$ref,$checkPrefix='user_',$silent=0)
 * 3813:	 function &getUserObj($classRef,$checkPrefix='user_',$silent=0)
 * 3871:	 function &makeInstance($className)
 * 3883:	 function makeInstanceClassName($className)
 * 3897:	 function &makeInstanceService($serviceType, $serviceSubType='', $excludeServiceKeys=array())
 * 3961:	 function plainMailEncoded($email,$subject,$message,$headers='',$enc='',$charset='',$dontEncodeHeader=false)
 * 4031:	 function quoted_printable($string,$maxlen=76)
 * 4078:	 function encodeHeader($line,$enc='',$charset='ISO-8859-1')
 * 4121:	 function substUrlsInPlainText($message,$urlmode='76',$index_script_url='')
 * 4155:	 function makeRedirectUrl($inUrl,$l=0,$index_script_url='')
 * 4182:	 function freetypeDpiComp($font_size)
 * 4194:	 function initSysLog()
 * 4251:	 function sysLog($msg, $extKey, $severity=0)
 * 4334:	 function devLog($msg, $extKey, $severity=0, $dataVar=FALSE)
 * 4355:	 function arrayToLogString($arr, $valueList=array(), $valueLength=20)
 * 4378:	 function imageMagickCommand($command, $parameters, $path='')
 * 4425:	 function unQuoteFilenames($parameters,$unQuote=FALSE)
 * 4459:	 function quoteJSvalue($value, $inScriptTags = false)
 *
 * TOTAL FUNCTIONS: 138
 * (This index is automatically created/updated by the extension "extdeveval")
 *
 */

	// a tabulator
define('TAB', chr(9));
	// a linefeed
define('LF', chr(10));
	// a carriage return
define('CR', chr(13));
	// a CR-LF combination
define('CRLF', CR . LF);

/**
 * The legendary "t3lib_div" class - Miscellaneous functions for general purpose.
 * Most of the functions does not relate specifically to TYPO3
 * However a section of functions requires certain TYPO3 features available
 * See comments in the source.
 * You are encouraged to use this library in your own scripts!
 *
 * USE:
 * The class is intended to be used without creating an instance of it.
 * So: Don't instantiate - call functions with "t3lib_div::" prefixed the function name.
 * So use t3lib_div::[method-name] to refer to the functions, eg. 't3lib_div::milliseconds()'
 *
 * @author	Kasper Skårhøj <kasperYYYY@typo3.com>
 * @package TYPO3
 * @subpackage t3lib
 */
final class t3lib_div {

		// Severity constants used by t3lib_div::sysLog()
	const SYSLOG_SEVERITY_INFO = 0;
	const SYSLOG_SEVERITY_NOTICE = 1;
	const SYSLOG_SEVERITY_WARNING = 2;
	const SYSLOG_SEVERITY_ERROR = 3;
	const SYSLOG_SEVERITY_FATAL = 4;

	/**
	 * Singleton instances returned by makeInstance, using the class names as
	 * array keys
	 *
	 * @var array<t3lib_Singleton>
	 */
	protected static $singletonInstances = array();

	/**
	 * Instances returned by makeInstance, using the class names as array keys
	 *
	 * @var array<array><object>
	 */
	protected static $nonSingletonInstances = array();

	/**
	 * Register for makeInstance with given class name and final class names to reduce number of class_exists() calls
	 *
	 * @var array Given class name => final class name
	 */
	protected static $finalClassNameRegister = array();

	/*************************
	 *
	 * GET/POST Variables
	 *
	 * Background:
	 * Input GET/POST variables in PHP may have their quotes escaped with "\" or not depending on configuration.
	 * TYPO3 has always converted quotes to BE escaped if the configuration told that they would not be so.
	 * But the clean solution is that quotes are never escaped and that is what the functions below offers.
	 * Eventually TYPO3 should provide this in the global space as well.
	 * In the transitional phase (or forever..?) we need to encourage EVERY to read and write GET/POST vars through the API functions below.
	 *
	 *************************/

	/**
	 * Returns the 'GLOBAL' value of incoming data from POST or GET, with priority to POST (that is equalent to 'GP' order)
	 * Strips slashes from all output, both strings and arrays.
	 * This function substitutes t3lib_div::GPvar()
	 * To enhancement security in your scripts, please consider using t3lib_div::_GET or t3lib_div::_POST if you already know by which method your data is arriving to the scripts!
	 * Usage: 537
	 *
	 * @param	string		GET/POST var to return
	 * @return	mixed		POST var named $var and if not set, the GET var of the same name.
	 */
	public static function _GP($var) {
		if (empty($var)) {
			return;
		}
		$value = isset($_POST[$var]) ? $_POST[$var] : $_GET[$var];
		if (isset($value)) {
			if (is_array($value)) {
				self::stripSlashesOnArray($value);
			} else {
				$value = stripslashes($value);
			}
		}
		return $value;
	}

	/**
	 * Returns the global arrays $_GET and $_POST merged with $_POST taking precedence.
	 *
	 * @param	string		Key (variable name) from GET or POST vars
	 * @return	array		Returns the GET vars merged recursively onto the POST vars.
	 */
	public static function _GPmerged($parameter) {
		$postParameter = (isset($_POST[$parameter]) && is_array($_POST[$parameter])) ? $_POST[$parameter] : array();
		$getParameter = (isset($_GET[$parameter]) && is_array($_GET[$parameter])) ? $_GET[$parameter] : array();

		$mergedParameters = self::array_merge_recursive_overrule($getParameter, $postParameter);
		self::stripSlashesOnArray($mergedParameters);

		return $mergedParameters;
	}

	/**
	 * Returns the global $_GET array (or value from) normalized to contain un-escaped values.
	 * ALWAYS use this API function to acquire the GET variables!
	 * Usage: 27
	 *
	 * @param	string		Optional pointer to value in GET array (basically name of GET var)
	 * @return	mixed		If $var is set it returns the value of $_GET[$var]. If $var is NULL (default), returns $_GET itself. In any case *slashes are stipped from the output!*
	 * @see _POST(), _GP(), _GETset()
	 */
	public static function _GET($var = NULL) {
		$value = ($var === NULL) ? $_GET : (empty($var) ? NULL : $_GET[$var]);
		if (isset($value)) { // Removes slashes since TYPO3 has added them regardless of magic_quotes setting.
			if (is_array($value)) {
				self::stripSlashesOnArray($value);
			} else {
				$value = stripslashes($value);
			}
		}
		return $value;
	}

	/**
	 * Returns the global $_POST array (or value from) normalized to contain un-escaped values.
	 * ALWAYS use this API function to acquire the $_POST variables!
	 * Usage: 41
	 *
	 * @param	string		Optional pointer to value in POST array (basically name of POST var)
	 * @return	mixed		If $var is set it returns the value of $_POST[$var]. If $var is NULL (default), returns $_POST itself. In any case *slashes are stipped from the output!*
	 * @see _GET(), _GP()
	 */
	public static function _POST($var = NULL) {
		$value = ($var === NULL) ? $_POST : (empty($var) ? NULL : $_POST[$var]);
		if (isset($value)) { // Removes slashes since TYPO3 has added them regardless of magic_quotes setting.
			if (is_array($value)) {
				self::stripSlashesOnArray($value);
			} else {
				$value = stripslashes($value);
			}
		}
		return $value;
	}

	/**
	 * Writes input value to $_GET.
	 * Usage: 2
	 *
	 * @param mixed $inputGet
	 *		array or single value to write to $_GET. Values should NOT be
	 *		escaped at input time (but will be escaped before writing
	 *		according to TYPO3 standards).
	 * @param string $key
	 *		alternative key; If set, this will not set the WHOLE GET array,
	 *		but only the key in it specified by this value!
	 *		You can specify to replace keys on deeper array levels by
	 *		separating the keys with a pipe.
	 *		Example: 'parentKey|childKey' will result in
	 *		array('parentKey' => array('childKey' => $inputGet))
	 *
	 * @return	void
	 */
	public static function _GETset($inputGet, $key = '') {
			// adds slashes since TYPO3 standard currently is that slashes
			// must be applied (regardless of magic_quotes setting)
		if (is_array($inputGet)) {
			self::addSlashesOnArray($inputGet);
		} else {
			$inputGet = addslashes($inputGet);
		}

		if ($key != '') {
			if (strpos($key, '|') !== FALSE) {
				$pieces = explode('|', $key);
				$newGet = array();
				$pointer =& $newGet;
				foreach ($pieces as $piece) {
					$pointer =& $pointer[$piece];
				}
				$pointer = $inputGet;
				$mergedGet = self::array_merge_recursive_overrule(
					$_GET, $newGet
				);

				$_GET = $mergedGet;
				$GLOBALS['HTTP_GET_VARS'] = $mergedGet;
			} else {
				$_GET[$key] = $inputGet;
				$GLOBALS['HTTP_GET_VARS'][$key] = $inputGet;
			}
		} elseif (is_array($inputGet)) {
			$_GET = $inputGet;
			$GLOBALS['HTTP_GET_VARS'] = $inputGet;
		}
	}

	/**
	 * Returns the  value of incoming data from globals variable $_POST or $_GET, with priority to $_POST (that is equalent to 'GP' order).
	 * Strips slashes of string-outputs, but not arrays UNLESS $strip is set. If $strip is set all output will have escaped characters unescaped.
	 * Usage: 2
	 *
	 * @param	string		GET/POST var to return
	 * @param	boolean		If set, values are stripped of return values that are *arrays!* - string/integer values returned are always strip-slashed()
	 * @return	mixed		POST var named $var and if not set, the GET var of the same name.
	 * @deprecated since TYPO3 3.6, will be removed in TYPO3 4.6 - Use t3lib_div::_GP instead (ALWAYS delivers a value with un-escaped values!)
	 * @see _GP()
	 */
	public static function GPvar($var, $strip = 0) {
		self::logDeprecatedFunction();

		if (empty($var)) {
			return;
		}
		$value = isset($_POST[$var]) ? $_POST[$var] : $_GET[$var];
		if (isset($value) && is_string($value)) {
			$value = stripslashes($value);
		} // Originally check '&& get_magic_quotes_gpc() ' but the values of $_GET are always slashed regardless of get_magic_quotes_gpc() because HTTP_POST/GET_VARS are run through addSlashesOnArray in the very beginning of index_ts.php eg.
		if ($strip && isset($value) && is_array($value)) {
			self::stripSlashesOnArray($value);
		}
		return $value;
	}

	/**
	 * Returns the global arrays $_GET and $_POST merged with $_POST taking precedence.
	 * Usage: 1
	 *
	 * @param	string		Key (variable name) from GET or POST vars
	 * @return	array		Returns the GET vars merged recursively onto the POST vars.
	 * @deprecated since TYPO3 3.7, will be removed in TYPO3 4.6 - Use t3lib_div::_GPmerged instead
	 * @see _GP()
	 */
	public static function GParrayMerged($var) {
		self::logDeprecatedFunction();

		return self::_GPmerged($var);
	}

	/**
	 * Wrapper for the RemoveXSS function.
	 * Removes potential XSS code from an input string.
	 *
	 * Using an external class by Travis Puderbaugh <kallahar@quickwired.com>
	 *
	 * @param	string		Input string
	 * @return	string		Input string with potential XSS code removed
	 */
	public static function removeXSS($string) {
		require_once(PATH_typo3 . 'contrib/RemoveXSS/RemoveXSS.php');
		$string = RemoveXSS::process($string);
		return $string;
	}


	/*************************
	 *
	 * IMAGE FUNCTIONS
	 *
	 *************************/


	/**
	 * Compressing a GIF file if not already LZW compressed.
	 * This function is a workaround for the fact that ImageMagick and/or GD does not compress GIF-files to their minimun size (that is RLE or no compression used)
	 *
	 *		 The function takes a file-reference, $theFile, and saves it again through GD or ImageMagick in order to compress the file
	 *		 GIF:
	 *		 If $type is not set, the compression is done with ImageMagick (provided that $GLOBALS['TYPO3_CONF_VARS']['GFX']['im_path_lzw'] is pointing to the path of a lzw-enabled version of 'convert') else with GD (should be RLE-enabled!)
	 *		 If $type is set to either 'IM' or 'GD' the compression is done with ImageMagick and GD respectively
	 *		 PNG:
	 *		 No changes.
	 *
	 *		 $theFile is expected to be a valid GIF-file!
	 *		 The function returns a code for the operation.
	 * Usage: 9
	 *
	 * @param	string		Filepath
	 * @param	string		See description of function
	 * @return	string		Returns "GD" if GD was used, otherwise "IM" if ImageMagick was used. If nothing done at all, it returns empty string.
	 */
	public static function gif_compress($theFile, $type) {
		$gfxConf = $GLOBALS['TYPO3_CONF_VARS']['GFX'];
		$returnCode = '';
		if ($gfxConf['gif_compress'] && strtolower(substr($theFile, -4, 4)) == '.gif') { // GIF...
			if (($type == 'IM' || !$type) && $gfxConf['im'] && $gfxConf['im_path_lzw']) { // IM
					// use temporary file to prevent problems with read and write lock on same file on network file systems
				$temporaryName  =  dirname($theFile) . '/' . md5(uniqid()) . '.gif';
					// rename could fail, if a simultaneous thread is currently working on the same thing
				if (@rename($theFile, $temporaryName)) {
					$cmd = self::imageMagickCommand('convert', '"' . $temporaryName . '" "' . $theFile . '"', $gfxConf['im_path_lzw']);
					t3lib_utility_Command::exec($cmd);
					unlink($temporaryName);
				}

				$returnCode = 'IM';
				if (@is_file($theFile)) {
					self::fixPermissions($theFile);
				}
			} elseif (($type == 'GD' || !$type) && $gfxConf['gdlib'] && !$gfxConf['gdlib_png']) { // GD
				$tempImage = imageCreateFromGif($theFile);
				imageGif($tempImage, $theFile);
				imageDestroy($tempImage);
				$returnCode = 'GD';
				if (@is_file($theFile)) {
					self::fixPermissions($theFile);
				}
			}
		}
		return $returnCode;
	}

	/**
	 * Converts a png file to gif.
	 * This converts a png file to gif IF the FLAG $GLOBALS['TYPO3_CONF_VARS']['FE']['png_to_gif'] is set true.
	 * Usage: 5
	 *
	 * @param	string		$theFile	the filename with path
	 * @return	string		new filename
	 */
	public static function png_to_gif_by_imagemagick($theFile) {
		if ($GLOBALS['TYPO3_CONF_VARS']['FE']['png_to_gif']
				&& $GLOBALS['TYPO3_CONF_VARS']['GFX']['im']
				&& $GLOBALS['TYPO3_CONF_VARS']['GFX']['im_path_lzw']
				&& strtolower(substr($theFile, -4, 4)) == '.png'
				&& @is_file($theFile)) { // IM
			$newFile = substr($theFile, 0, -4) . '.gif';
			$cmd = self::imageMagickCommand('convert', '"' . $theFile . '" "' . $newFile . '"', $GLOBALS['TYPO3_CONF_VARS']['GFX']['im_path_lzw']);
			t3lib_utility_Command::exec($cmd);
			$theFile = $newFile;
			if (@is_file($newFile)) {
				self::fixPermissions($newFile);
			}
				// unlink old file?? May be bad idea bacause TYPO3 would then recreate the file every time as TYPO3 thinks the file is not generated because it's missing!! So do not unlink $theFile here!!
		}
		return $theFile;
	}

	/**
	 * Returns filename of the png/gif version of the input file (which can be png or gif).
	 * If input file type does not match the wanted output type a conversion is made and temp-filename returned.
	 * Usage: 2
	 *
	 * @param	string		Filepath of image file
	 * @param	boolean		If set, then input file is converted to PNG, otherwise to GIF
	 * @return	string		If the new image file exists, it's filepath is returned
	 */
	public static function read_png_gif($theFile, $output_png = 0) {
		if ($GLOBALS['TYPO3_CONF_VARS']['GFX']['im'] && @is_file($theFile)) {
			$ext = strtolower(substr($theFile, -4, 4));
			if (
				((string) $ext == '.png' && $output_png) ||
				((string) $ext == '.gif' && !$output_png)
			) {
				return $theFile;
			} else {
				$newFile = PATH_site . 'typo3temp/readPG_' . md5($theFile . '|' . filemtime($theFile)) . ($output_png ? '.png' : '.gif');
				$cmd = self::imageMagickCommand('convert', '"' . $theFile . '" "' . $newFile . '"', $GLOBALS['TYPO3_CONF_VARS']['GFX']['im_path']);
				t3lib_utility_Command::exec($cmd);
				if (@is_file($newFile)) {
					self::fixPermissions($newFile);
					return $newFile;
				}
			}
		}
	}


	/*************************
	 *
	 * STRING FUNCTIONS
	 *
	 *************************/

	/**
	 * Truncates string.
	 * Returns a new string of max. $chars length.
	 * If the string is longer, it will be truncated and appended with '...'.
	 * Usage: 39
	 *
	 * @param	string		string to truncate
	 * @param	integer		must be an integer with an absolute value of at least 4. if negative the string is cropped from the right end.
	 * @param	string		String to append to the output if it is truncated, default is '...'
	 * @return	string		new string
	 * @deprecated since TYPO3 4.1, will be removed in TYPO3 4.6 - Works ONLY for single-byte charsets! Use t3lib_div::fixed_lgd_cs() instead
	 * @see fixed_lgd_pre()
	 */
	public static function fixed_lgd($string, $origChars, $preStr = '...') {
		self::logDeprecatedFunction();

		$chars = abs($origChars);
		if ($chars >= 4) {
			if (strlen($string) > $chars) {
				return $origChars < 0 ?
						$preStr . trim(substr($string, -($chars - 3))) :
						trim(substr($string, 0, $chars - 3)) . $preStr;
			}
		}
		return $string;
	}

	/**
	 * Truncates string.
	 * Returns a new string of max. $chars length.
	 * If the string is longer, it will be truncated and prepended with '...'.
	 * This works like fixed_lgd(), but is truncated in the start of the string instead of the end
	 * Usage: 6
	 *
	 * @param	string		string to truncate
	 * @param	integer		must be an integer of at least 4
	 * @return	string		new string
	 * @deprecated since TYPO3 4.1, will be removed in TYPO3 4.6 - Use t3lib_div::fixed_lgd_cs() instead (with negative input value for $chars)
	 * @see fixed_lgd()
	 */
	public static function fixed_lgd_pre($string, $chars) {
		self::logDeprecatedFunction();

		return strrev(self::fixed_lgd(strrev($string), $chars));
	}

	/**
	 * Truncates a string with appended/prepended "..." and takes current character set into consideration.
	 * Usage: 75
	 *
	 * @param	string		string to truncate
	 * @param	integer		must be an integer with an absolute value of at least 4. if negative the string is cropped from the right end.
	 * @param	string		appendix to the truncated string
	 * @return	string		cropped string
	 */
	public static function fixed_lgd_cs($string, $chars, $appendString = '...') {
		if (is_object($GLOBALS['LANG'])) {
			return $GLOBALS['LANG']->csConvObj->crop($GLOBALS['LANG']->charSet, $string, $chars, $appendString);
		} elseif (is_object($GLOBALS['TSFE'])) {
			$charSet = ($GLOBALS['TSFE']->renderCharset != '' ? $GLOBALS['TSFE']->renderCharset : $GLOBALS['TSFE']->defaultCharSet);
			return $GLOBALS['TSFE']->csConvObj->crop($charSet, $string, $chars, $appendString);
		} else {
				// this case should not happen
			$csConvObj = self::makeInstance('t3lib_cs');
			return $csConvObj->crop('iso-8859-1', $string, $chars, $appendString);
		}
	}

	/**
	 * Breaks up the text for emails
	 * Usage: 1
	 *
	 * @param	string		The string to break up
	 * @param	string		The string to implode the broken lines with (default/typically \n)
	 * @param	integer		The line length
	 * @deprecated since TYPO3 4.1, will be removed in TYPO3 4.6 - Use PHP function wordwrap()
	 * @return	string
	 */
	public static function breakTextForEmail($str, $implChar = LF, $charWidth = 76) {
		self::logDeprecatedFunction();

		$lines = explode(LF, $str);
		$outArr = array();
		foreach ($lines as $lStr) {
			$outArr[] = self::breakLinesForEmail($lStr, $implChar, $charWidth);
		}
		return implode(LF, $outArr);
	}

	/**
	 * Breaks up a single line of text for emails
	 * Usage: 5
	 *
	 * @param	string		The string to break up
	 * @param	string		The string to implode the broken lines with (default/typically \n)
	 * @param	integer		The line length
	 * @return	string
	 * @see breakTextForEmail()
	 */
	public static function breakLinesForEmail($str, $implChar = LF, $charWidth = 76) {
		$lines = array();
		$l = $charWidth;
		$p = 0;
		while (strlen($str) > $p) {
			$substr = substr($str, $p, $l);
			if (strlen($substr) == $l) {
				$count = count(explode(' ', trim(strrev($substr))));
				if ($count > 1) { // OK...
					$parts = explode(' ', strrev($substr), 2);
					$theLine = strrev($parts[1]);
				} else {
					$afterParts = explode(' ', substr($str, $l + $p), 2);
					$theLine = $substr . $afterParts[0];
				}
				if (!strlen($theLine)) {
					break;
				} // Error, because this would keep us in an endless loop.
			} else {
				$theLine = $substr;
			}

			$lines[] = trim($theLine);
			$p += strlen($theLine);
			if (!trim(substr($str, $p, $l))) {
				break;
			} // added...
		}
		return implode($implChar, $lines);
	}

	/**
	 * Match IP number with list of numbers with wildcard
	 * Dispatcher method for switching into specialised IPv4 and IPv6 methods.
	 * Usage: 10
	 *
	 * @param	string		$baseIP is the current remote IP address for instance, typ. REMOTE_ADDR
	 * @param	string		$list is a comma-list of IP-addresses to match with. *-wildcard allowed instead of number, plus leaving out parts in the IP number is accepted as wildcard (eg. 192.168.*.* equals 192.168). If list is "*" no check is done and the function returns TRUE immediately. An empty list always returns FALSE.
	 * @return	boolean		True if an IP-mask from $list matches $baseIP
	 */
	public static function cmpIP($baseIP, $list) {
		$list = trim($list);
		if ($list === '') {
			return FALSE;
		} elseif ($list === '*') {
			return TRUE;
		}
		if (strpos($baseIP, ':') !== FALSE && self::validIPv6($baseIP)) {
			return self::cmpIPv6($baseIP, $list);
		} else {
			return self::cmpIPv4($baseIP, $list);
		}
	}

	/**
	 * Match IPv4 number with list of numbers with wildcard
	 *
	 * @param	string		$baseIP is the current remote IP address for instance, typ. REMOTE_ADDR
	 * @param	string		$list is a comma-list of IP-addresses to match with. *-wildcard allowed instead of number, plus leaving out parts in the IP number is accepted as wildcard (eg. 192.168.*.* equals 192.168)
	 * @return	boolean		True if an IP-mask from $list matches $baseIP
	 */
	public static function cmpIPv4($baseIP, $list) {
		$IPpartsReq = explode('.', $baseIP);
		if (count($IPpartsReq) == 4) {
			$values = self::trimExplode(',', $list, 1);

			foreach ($values as $test) {
				list($test, $mask) = explode('/', $test);

				if (intval($mask)) {
						// "192.168.3.0/24"
					$lnet = ip2long($test);
					$lip = ip2long($baseIP);
					$binnet = str_pad(decbin($lnet), 32, '0', STR_PAD_LEFT);
					$firstpart = substr($binnet, 0, $mask);
					$binip = str_pad(decbin($lip), 32, '0', STR_PAD_LEFT);
					$firstip = substr($binip, 0, $mask);
					$yes = (strcmp($firstpart, $firstip) == 0);
				} else {
						// "192.168.*.*"
					$IPparts = explode('.', $test);
					$yes = 1;
					foreach ($IPparts as $index => $val) {
						$val = trim($val);
						if (strcmp($val, '*') && strcmp($IPpartsReq[$index], $val)) {
							$yes = 0;
						}
					}
				}
				if ($yes) {
					return TRUE;
				}
			}
		}
		return FALSE;
	}

	/**
	 * Match IPv6 address with a list of IPv6 prefixes
	 *
	 * @param	string		$baseIP is the current remote IP address for instance
	 * @param	string		$list is a comma-list of IPv6 prefixes, could also contain IPv4 addresses
	 * @return	boolean		True if an baseIP matches any prefix
	 */
	public static function cmpIPv6($baseIP, $list) {
		$success = FALSE; // Policy default: Deny connection
		$baseIP = self::normalizeIPv6($baseIP);

		$values = self::trimExplode(',', $list, 1);
		foreach ($values as $test) {
			$testList = explode('/', $test);
			if (count($testList) == 2) {
				list($test, $mask) = $testList;
			} else {
				$mask = FALSE;
			}

			if (self::validIPv6($test)) {
				$test = self::normalizeIPv6($test);
				$maskInt = intval($mask) ? intval($mask) : 128;
				if ($mask === '0') { // special case; /0 is an allowed mask - equals a wildcard
					$success = TRUE;
				} elseif ($maskInt == 128) {
					$success = ($test === $baseIP);
				} else {
					$testBin = self::IPv6Hex2Bin($test);
					$baseIPBin = self::IPv6Hex2Bin($baseIP);
					$success = TRUE;

					// modulo is 0 if this is a 8-bit-boundary
					$maskIntModulo = $maskInt % 8;
					$numFullCharactersUntilBoundary = intval($maskInt / 8);

					if (substr($testBin, 0, $numFullCharactersUntilBoundary) !== substr($baseIPBin, 0, $numFullCharactersUntilBoundary)) {
						$success = FALSE;
					} elseif ($maskIntModulo > 0) {
						// if not an 8-bit-boundary, check bits of last character
						$testLastBits = str_pad(decbin(ord(substr($testBin, $numFullCharactersUntilBoundary, 1))), 8, '0', STR_PAD_LEFT);
						$baseIPLastBits = str_pad(decbin(ord(substr($baseIPBin, $numFullCharactersUntilBoundary, 1))), 8, '0', STR_PAD_LEFT);
						if (strncmp($testLastBits, $baseIPLastBits, $maskIntModulo) != 0) {
							$success = FALSE;
						}
					}
				}
			}
			if ($success) {
				return TRUE;
			}
		}
		return FALSE;
	}

	/**
	 * Transform a regular IPv6 address from hex-representation into binary
	 *
	 * @param string $hex IPv6 address in hex-presentation
	 * @return string Binary representation (16 characters, 128 characters)
	 * @see normalizeIPv6()
	 */
	public static function IPv6Hex2Bin($hex) {
		// normalized representation has 39 characters (0000:0000:0000:0000:0000:0000:0000:0000)
		if (strlen($hex) < 39) {
			$hex = self::normalizeIPv6($hex);
		}
		$hex = str_replace(':', '', $hex); // Replace colon to nothing
		$bin = pack("H*" , $hex);
		return $bin;
	}

	/**
	 * Normalize an IPv6 address to full length
	 *
	 * @param	string		Given IPv6 address
	 * @return	string		Normalized address
	 */
	public static function normalizeIPv6($address) {
		$normalizedAddress = '';
		$stageOneAddress = '';

		$chunks = explode('::', $address); // Count 2 if if address has hidden zero blocks
		if (count($chunks) == 2) {
			$chunksLeft = explode(':', $chunks[0]);
			$chunksRight = explode(':', $chunks[1]);
			$left = count($chunksLeft);
			$right = count($chunksRight);

				// Special case: leading zero-only blocks count to 1, should be 0
			if ($left == 1 && strlen($chunksLeft[0]) == 0) {
				$left = 0;
			}

			$hiddenBlocks = 8 - ($left + $right);
			$hiddenPart = '';
			$h = 0;
			while ($h < $hiddenBlocks) {
				$hiddenPart .= '0000:';
				$h++;
			}

			if ($left == 0) {
				$stageOneAddress = $hiddenPart . $chunks[1];
			} else {
				$stageOneAddress = $chunks[0] . ':' . $hiddenPart . $chunks[1];
			}
		} else {
			$stageOneAddress = $address;
		}

			// normalize the blocks:
		$blocks = explode(':', $stageOneAddress);
		$divCounter = 0;
		foreach ($blocks as $block) {
			$tmpBlock = '';
			$i = 0;
			$hiddenZeros = 4 - strlen($block);
			while ($i < $hiddenZeros) {
				$tmpBlock .= '0';
				$i++;
			}
			$normalizedAddress .= $tmpBlock . $block;
			if ($divCounter < 7) {
				$normalizedAddress .= ':';
				$divCounter++;
			}
		}
		return $normalizedAddress;
	}

	/**
	 * Validate a given IP address.
	 *
	 * Possible format are IPv4 and IPv6.
	 *
	 * @param	string		IP address to be tested
	 * @return	boolean		True if $ip is either of IPv4 or IPv6 format.
	 */
	public static function validIP($ip) {
		return (filter_var($ip, FILTER_VALIDATE_IP) !== FALSE);
	}

	/**
	 * Validate a given IP address to the IPv4 address format.
	 *
	 * Example for possible format:  10.0.45.99
	 *
	 * @param	string		IP address to be tested
	 * @return	boolean		True if $ip is of IPv4 format.
	 */
	public static function validIPv4($ip) {
		return (filter_var($ip, FILTER_VALIDATE_IP, FILTER_FLAG_IPV4) !== FALSE);
	}

	/**
	 * Validate a given IP address to the IPv6 address format.
	 *
	 * Example for possible format:  43FB::BB3F:A0A0:0 | ::1
	 *
	 * @param	string		IP address to be tested
	 * @return	boolean		True if $ip is of IPv6 format.
	 */
	public static function validIPv6($ip) {
		return (filter_var($ip, FILTER_VALIDATE_IP, FILTER_FLAG_IPV6) !== FALSE);
	}

	/**
	 * Match fully qualified domain name with list of strings with wildcard
	 *
	 * @param string $baseIP A hostname or an IPv4/IPv6-address (will by reverse-resolved; typically REMOTE_ADDR)
	 * @param string $list A comma-list of domain names to match with. *-wildcard allowed but cannot be part of a string, so it must match the full host name (eg. myhost.*.com => correct, myhost.*domain.com => wrong)
	 * @return boolean TRUE if a domain name mask from $list matches $baseIP
	 */
	public static function cmpFQDN($baseHost, $list) {
		$baseHost = trim($baseHost);
		if (empty($baseHost)) {
			return FALSE;
		}
		if (self::validIPv4($baseHost) || self::validIPv6($baseHost)) {
				// resolve hostname
				// note: this is reverse-lookup and can be randomly set as soon as somebody is able to set
				// the reverse-DNS for his IP (security when for example used with REMOTE_ADDR)
			$baseHostName = gethostbyaddr($baseHost);
			if ($baseHostName === $baseHost) {
					// unable to resolve hostname
				return FALSE;
			}
		} else {
			$baseHostName = $baseHost;
		}
		$baseHostNameParts = explode('.', $baseHostName);

		$values = self::trimExplode(',', $list, 1);

		foreach ($values as $test) {
			$hostNameParts = explode('.', $test);

				// to match hostNameParts can only be shorter (in case of wildcards) or equal
			if (count($hostNameParts) > count($baseHostNameParts)) {
				continue;
			}

			$yes = TRUE;
			foreach ($hostNameParts as $index => $val) {
				$val = trim($val);
				if ($val === '*') {
						// wildcard valid for one or more hostname-parts

					$wildcardStart = $index + 1;
						// wildcard as last/only part always matches, otherwise perform recursive checks
					if ($wildcardStart < count($hostNameParts)) {
						$wildcardMatched = FALSE;
						$tempHostName = implode('.', array_slice($hostNameParts, $index + 1));
						while (($wildcardStart < count($baseHostNameParts)) && (!$wildcardMatched)) {
							$tempBaseHostName = implode('.', array_slice($baseHostNameParts, $wildcardStart));
							$wildcardMatched = self::cmpFQDN($tempBaseHostName, $tempHostName);
							$wildcardStart++;
						}
						if ($wildcardMatched) {
								// match found by recursive compare
							return TRUE;
						} else {
							$yes = FALSE;
						}
					}
				} elseif ($baseHostNameParts[$index] !== $val) {
						// in case of no match
					$yes = FALSE;
				}
			}
			if ($yes) {
				return TRUE;
			}
		}
		return FALSE;
	}

	/**
	 * Checks if a given URL matches the host that currently handles this HTTP request.
	 * Scheme, hostname and (optional) port of the given URL are compared.
	 *
	 * @param	string		$url: URL to compare with the TYPO3 request host
	 * @return	boolean		Whether the URL matches the TYPO3 request host
	 */
	public static function isOnCurrentHost($url) {
		return (stripos($url . '/', self::getIndpEnv('TYPO3_REQUEST_HOST') . '/') === 0);
	}

	/**
	 * Check for item in list
	 * Check if an item exists in a comma-separated list of items.
	 * Usage: 163
	 *
	 * @param	string		comma-separated list of items (string)
	 * @param	string		item to check for
	 * @return	boolean		true if $item is in $list
	 */
	public static function inList($list, $item) {
		return (strpos(',' . $list . ',', ',' . $item . ',') !== FALSE ? TRUE : FALSE);
	}

	/**
	 * Removes an item from a comma-separated list of items.
	 * Usage: 1
	 *
	 * @param	string		element to remove
	 * @param	string		comma-separated list of items (string)
	 * @return	string		new comma-separated list of items
	 */
	public static function rmFromList($element, $list) {
		$items = explode(',', $list);
		foreach ($items as $k => $v) {
			if ($v == $element) {
				unset($items[$k]);
			}
		}
		return implode(',', $items);
	}

	/**
	 * Expand a comma-separated list of integers with ranges (eg 1,3-5,7 becomes 1,3,4,5,7).
	 * Ranges are limited to 1000 values per range.
	 *
	 * @param	string		comma-separated list of integers with ranges (string)
	 * @return	string		new comma-separated list of items
	 * @author	Martin Kutschker <martin.kutschker@activesolution.at>
	 */
	public static function expandList($list) {
		$items = explode(',', $list);
		$list = array();
		foreach ($items as $item) {
			$range = explode('-', $item);
			if (isset($range[1])) {
				$runAwayBrake = 1000;
				for ($n = $range[0]; $n <= $range[1]; $n++) {
					$list[] = $n;

					$runAwayBrake--;
					if ($runAwayBrake <= 0) {
						break;
					}
				}
			} else {
				$list[] = $item;
			}
		}
		return implode(',', $list);
	}

	/**
	 * Forces the integer $theInt into the boundaries of $min and $max. If the $theInt is 'false' then the $zeroValue is applied.
	 * Usage: 224
	 *
	 * @param	integer		Input value
	 * @param	integer		Lower limit
	 * @param	integer		Higher limit
	 * @param	integer		Default value if input is false.
	 * @return	integer		The input value forced into the boundaries of $min and $max
	 */
	public static function intInRange($theInt, $min, $max = 2000000000, $zeroValue = 0) {
			// Returns $theInt as an integer in the integerspace from $min to $max
		$theInt = intval($theInt);
		if ($zeroValue && !$theInt) {
			$theInt = $zeroValue;
		} // If the input value is zero after being converted to integer, zeroValue may set another default value for it.
		if ($theInt < $min) {
			$theInt = $min;
		}
		if ($theInt > $max) {
			$theInt = $max;
		}
		return $theInt;
	}

	/**
	 * Returns the $integer if greater than zero, otherwise returns zero.
	 * Usage: 1
	 *
	 * @param	integer		Integer string to process
	 * @return	integer
	 */
	public static function intval_positive($theInt) {
		$theInt = intval($theInt);
		if ($theInt < 0) {
			$theInt = 0;
		}
		return $theInt;
	}

	/**
	 * Returns an integer from a three part version number, eg '4.12.3' -> 4012003
	 * This method will be deprecated in TYPO3 4.6. You are encouraged to start using
	 * t3lib_utility_VersionNumber::convertVersionNumberToInteger() instead
	 * Usage: 2
	 *
	 * @param	string		Version number on format x.x.x
	 * @return	integer		Integer version of version number (where each part can count to 999)
	 * @see t3lib_utility_VersionNumber::convertVersionNumberToInteger()
	 */
	public static function int_from_ver($verNumberStr) {
		$verParts = explode('.', $verNumberStr);
		return intval((int) $verParts[0] . str_pad((int) $verParts[1], 3, '0', STR_PAD_LEFT) . str_pad((int) $verParts[2], 3, '0', STR_PAD_LEFT));
	}

	/**
	 * Returns true if the current TYPO3 version (or compatibility version) is compatible to the input version
	 * Notice that this function compares branches, not versions (4.0.1 would be > 4.0.0 although they use the same compat_version)
	 *
	 * @param	string		Minimum branch number required (format x.y / e.g. "4.0" NOT "4.0.0"!)
	 * @return	boolean		Returns true if this setup is compatible with the provided version number
	 * @todo	Still needs a function to convert versions to branches
	 */
	public static function compat_version($verNumberStr) {
		global $TYPO3_CONF_VARS;
		$currVersionStr = $TYPO3_CONF_VARS['SYS']['compat_version'] ? $TYPO3_CONF_VARS['SYS']['compat_version'] : TYPO3_branch;

		if (self::int_from_ver($currVersionStr) < self::int_from_ver($verNumberStr)) {
			return FALSE;
		} else {
			return TRUE;
		}
	}

	/**
	 * Makes a positive integer hash out of the first 7 chars from the md5 hash of the input
	 * Usage: 5
	 *
	 * @param	string		String to md5-hash
	 * @return	integer		Returns 28bit integer-hash
	 */
	public static function md5int($str) {
		return hexdec(substr(md5($str), 0, 7));
	}

	/**
	 * Returns the first 10 positions of the MD5-hash		(changed from 6 to 10 recently)
	 *
	 * Usage: 37
	 *
	 * @param	string		Input string to be md5-hashed
	 * @param	integer		The string-length of the output
	 * @return	string		Substring of the resulting md5-hash, being $len chars long (from beginning)
	 */
	public static function shortMD5($input, $len = 10) {
		return substr(md5($input), 0, $len);
	}

	/**
	 * Returns a proper HMAC on a given input string and secret TYPO3 encryption key.
	 *
	 * @param	 string		Input string to create HMAC from
	 * @return	 string		resulting (hexadecimal) HMAC currently with a length of 40 (HMAC-SHA-1)
	 */
	public static function hmac($input) {
		$hashAlgorithm = 'sha1';
		$hashBlocksize = 64;
		$hmac = '';

		if (extension_loaded('hash') && function_exists('hash_hmac') && function_exists('hash_algos') && in_array($hashAlgorithm, hash_algos())) {
			$hmac = hash_hmac($hashAlgorithm, $input, $GLOBALS['TYPO3_CONF_VARS']['SYS']['encryptionKey']);
		} else {
				// outer padding
			$opad = str_repeat(chr(0x5C), $hashBlocksize);
				// innner padding
			$ipad = str_repeat(chr(0x36), $hashBlocksize);
			if (strlen($GLOBALS['TYPO3_CONF_VARS']['SYS']['encryptionKey']) > $hashBlocksize) {
					// keys longer than blocksize are shorten
				$key = str_pad(pack('H*', call_user_func($hashAlgorithm, $GLOBALS['TYPO3_CONF_VARS']['SYS']['encryptionKey'])), $hashBlocksize, chr(0x00));
			} else {
					// keys shorter than blocksize are zero-padded
				$key = str_pad($GLOBALS['TYPO3_CONF_VARS']['SYS']['encryptionKey'], $hashBlocksize, chr(0x00));
			}
			$hmac = call_user_func($hashAlgorithm, ($key ^ $opad) . pack('H*', call_user_func($hashAlgorithm, ($key ^ $ipad) . $input)));
		}
		return $hmac;
	}

	/**
	 * Takes comma-separated lists and arrays and removes all duplicates
	 * If a value in the list is trim(empty), the value is ignored.
	 * Usage: 16
	 *
	 * @param	string		Accept multiple parameters wich can be comma-separated lists of values and arrays.
	 * @param	mixed		$secondParameter: Dummy field, which if set will show a warning!
	 * @return	string		Returns the list without any duplicates of values, space around values are trimmed
	 */
	public static function uniqueList($in_list, $secondParameter = NULL) {
		if (is_array($in_list)) {
			throw new InvalidArgumentException(
				'TYPO3 Fatal Error: t3lib_div::uniqueList() does NOT support array arguments anymore! Only string comma lists!',
				1270853885
			);
		}
		if (isset($secondParameter)) {
			throw new InvalidArgumentException(
				'TYPO3 Fatal Error: t3lib_div::uniqueList() does NOT support more than a single argument value anymore. You have specified more than one!',
				1270853886
			);
		}

		return implode(',', array_unique(self::trimExplode(',', $in_list, 1)));
	}

	/**
	 * Splits a reference to a file in 5 parts
	 * Usage: 43
	 *
	 * @param	string		Filename/filepath to be analysed
	 * @return	array		Contains keys [path], [file], [filebody], [fileext], [realFileext]
	 */
	public static function split_fileref($fileref) {
		$reg = array();
		if (preg_match('/(.*\/)(.*)$/', $fileref, $reg)) {
			$info['path'] = $reg[1];
			$info['file'] = $reg[2];
		} else {
			$info['path'] = '';
			$info['file'] = $fileref;
		}

		$reg = '';
		if (!is_dir($fileref) && preg_match('/(.*)\.([^\.]*$)/', $info['file'], $reg)) {
			$info['filebody'] = $reg[1];
			$info['fileext'] = strtolower($reg[2]);
			$info['realFileext'] = $reg[2];
		} else {
			$info['filebody'] = $info['file'];
			$info['fileext'] = '';
		}
		reset($info);
		return $info;
	}

	/**
	 * Returns the directory part of a path without trailing slash
	 * If there is no dir-part, then an empty string is returned.
	 * Behaviour:
	 *
	 * '/dir1/dir2/script.php' => '/dir1/dir2'
	 * '/dir1/' => '/dir1'
	 * 'dir1/script.php' => 'dir1'
	 * 'd/script.php' => 'd'
	 * '/script.php' => ''
	 * '' => ''
	 * Usage: 5
	 *
	 * @param	string		Directory name / path
	 * @return	string		Processed input value. See function description.
	 */
	public static function dirname($path) {
		$p = self::revExplode('/', $path, 2);
		return count($p) == 2 ? $p[0] : '';
	}

	/**
	 * Modifies a HTML Hex color by adding/subtracting $R,$G and $B integers
	 * Usage: 11
	 *
	 * @param	string		A hexadecimal color code, #xxxxxx
	 * @param	integer		Offset value 0-255
	 * @param	integer		Offset value 0-255
	 * @param	integer		Offset value 0-255
	 * @return	string		A hexadecimal color code, #xxxxxx, modified according to input vars
	 * @see modifyHTMLColorAll()
	 */
	public static function modifyHTMLColor($color, $R, $G, $B) {
			// This takes a hex-color (# included!) and adds $R, $G and $B to the HTML-color (format: #xxxxxx) and returns the new color
		$nR = self::intInRange(hexdec(substr($color, 1, 2)) + $R, 0, 255);
		$nG = self::intInRange(hexdec(substr($color, 3, 2)) + $G, 0, 255);
		$nB = self::intInRange(hexdec(substr($color, 5, 2)) + $B, 0, 255);
		return '#' .
				substr('0' . dechex($nR), -2) .
				substr('0' . dechex($nG), -2) .
				substr('0' . dechex($nB), -2);
	}

	/**
	 * Modifies a HTML Hex color by adding/subtracting $all integer from all R/G/B channels
	 * Usage: 6
	 *
	 * @param	string		A hexadecimal color code, #xxxxxx
	 * @param	integer		Offset value 0-255 for all three channels.
	 * @return	string		A hexadecimal color code, #xxxxxx, modified according to input vars
	 * @see modifyHTMLColor()
	 */
	public static function modifyHTMLColorAll($color, $all) {
		return self::modifyHTMLColor($color, $all, $all, $all);
	}

	/**
	 * Removes comma (if present) in the end of string
	 * Usage: 2
	 *
	 * @param	string		String from which the comma in the end (if any) will be removed.
	 * @return	string
	 * @deprecated since TYPO3 4.5, will be removed in TYPO3 4.7 - Use rtrim() directly
	 */
	public static function rm_endcomma($string) {
		self::logDeprecatedFunction();

		return rtrim($string, ',');
	}

	/**
	 * strtoupper which converts danish (and other characters) characters as well
	 * Usage: 0
	 *
	 * @param	string		String to process
	 * @return	string
	 * @deprecated since TYPO3 3.5, will be removed in TYPO3 4.6 - Use t3lib_cs::conv_case() instead or for HTML output, wrap your content in <span class="uppercase">...</span>)
	 * @ignore
	 */
	public static function danish_strtoupper($string) {
		self::logDeprecatedFunction();

		$value = strtoupper($string);
		return strtr($value, array(
			chr(225) => chr(193),
			chr(233) => chr(201),
			chr(250) => chr(218),
			chr(237) => chr(205),
			chr(226) => chr(196),
			chr(234) => chr(203),
			chr(251) => chr(220),
			chr(244) => chr(214),
			chr(238) => chr(207),
			chr(230) => chr(198),
			chr(248) => chr(216),
			chr(229) => chr(197),
			chr(228) => chr(196),
			chr(246) => chr(214),
			chr(252) => chr(220),
		));
	}

	/**
	 * Change umlaut characters to plain ASCII with normally two character target
	 * Only known characters will be converted, so don't expect a result for any character.
	 *
	 * ä => ae, Ö => Oe
	 *
	 * @param	string		String to convert.
	 * @deprecated since TYPO3 4.1, will be removed in TYPO3 4.6 - Works only for western europe single-byte charsets! Use t3lib_cs::specCharsToASCII() instead!
	 * @return	string
	 */
	public static function convUmlauts($str) {
		self::logDeprecatedFunction();

		$pattern = array(chr(228), chr(196), chr(246), chr(214), chr(252), chr(220), chr(223), chr(229), chr(197), chr(248), chr(216), chr(230), chr(198));
		$replace = array('ae', 'Ae', 'oe', 'Oe', 'ue', 'Ue', 'ss', 'aa', 'AA', 'oe', 'OE', 'ae', 'AE');
		return str_replace($pattern, $replace, $str);
	}

	/**
	 * Tests if the input can be interpreted as integer.
	 *
	 * @param mixed Any input variable to test
	 * @return boolean Returns true if string is an integer
	 */
	public static function testInt($var) {
		if ($var === '') {
			return FALSE;
		}
		return (string) intval($var) === (string) $var;
	}

	/**
	 * Returns true if the first part of $str matches the string $partStr
	 * Usage: 59
	 *
	 * @param	string		Full string to check
	 * @param	string		Reference string which must be found as the "first part" of the full string
	 * @return	boolean		True if $partStr was found to be equal to the first part of $str
	 */
	public static function isFirstPartOfStr($str, $partStr) {
		return $partStr != '' && strpos((string) $str, (string) $partStr, 0) === 0;
	}

	/**
	 * Formats the input integer $sizeInBytes as bytes/kilobytes/megabytes (-/K/M)
	 * Usage: 53
	 *
	 * @param	integer		Number of bytes to format.
	 * @param	string		Labels for bytes, kilo, mega and giga separated by vertical bar (|) and possibly encapsulated in "". Eg: " | K| M| G" (which is the default value)
	 * @return	string		Formatted representation of the byte number, for output.
	 */
	public static function formatSize($sizeInBytes, $labels = '') {

			// Set labels:
		if (strlen($labels) == 0) {
			$labels = ' | K| M| G';
		} else {
			$labels = str_replace('"', '', $labels);
		}
		$labelArr = explode('|', $labels);

			// Find size:
		if ($sizeInBytes > 900) {
			if ($sizeInBytes > 900000000) { // GB
				$val = $sizeInBytes / (1024 * 1024 * 1024);
				return number_format($val, (($val < 20) ? 1 : 0), '.', '') . $labelArr[3];
			}
			elseif ($sizeInBytes > 900000) { // MB
				$val = $sizeInBytes / (1024 * 1024);
				return number_format($val, (($val < 20) ? 1 : 0), '.', '') . $labelArr[2];
			} else { // KB
				$val = $sizeInBytes / (1024);
				return number_format($val, (($val < 20) ? 1 : 0), '.', '') . $labelArr[1];
			}
		} else { // Bytes
			return $sizeInBytes . $labelArr[0];
		}
	}

	/**
	 * Returns microtime input to milliseconds
	 * Usage: 2
	 *
	 * @param	string		Microtime
	 * @return	integer		Microtime input string converted to an integer (milliseconds)
	 */
	public static function convertMicrotime($microtime) {
		$parts = explode(' ', $microtime);
		return round(($parts[0] + $parts[1]) * 1000);
	}

	/**
	 * This splits a string by the chars in $operators (typical /+-*) and returns an array with them in
	 * Usage: 2
	 *
	 * @param	string		Input string, eg "123 + 456 / 789 - 4"
	 * @param	string		Operators to split by, typically "/+-*"
	 * @return	array		Array with operators and operands separated.
	 * @see tslib_cObj::calc(), tslib_gifBuilder::calcOffset()
	 */
	public static function splitCalc($string, $operators) {
		$res = Array();
		$sign = '+';
		while ($string) {
			$valueLen = strcspn($string, $operators);
			$value = substr($string, 0, $valueLen);
			$res[] = Array($sign, trim($value));
			$sign = substr($string, $valueLen, 1);
			$string = substr($string, $valueLen + 1);
		}
		reset($res);
		return $res;
	}

	/**
	 * Calculates the input by +,-,*,/,%,^ with priority to + and -
	 * Usage: 1
	 *
	 * @param	string		Input string, eg "123 + 456 / 789 - 4"
	 * @return	integer		Calculated value. Or error string.
	 * @see calcParenthesis()
	 */
	public static function calcPriority($string) {
		$string = preg_replace('/[[:space:]]*/', '', $string); // removing all whitespace
		$string = '+' . $string; // Ensuring an operator for the first entrance
		$qm = '\*\/\+-^%';
		$regex = '([' . $qm . '])([' . $qm . ']?[0-9\.]*)';
			// split the expression here:
		$reg = array();
		preg_match_all('/' . $regex . '/', $string, $reg);

		reset($reg[2]);
		$number = 0;
		$Msign = '+';
		$err = '';
		$buffer = doubleval(current($reg[2]));
		next($reg[2]); // Advance pointer

		while (list($k, $v) = each($reg[2])) {
			$v = doubleval($v);
			$sign = $reg[1][$k];
			if ($sign == '+' || $sign == '-') {
				$number = $Msign == '-' ? $number -= $buffer : $number += $buffer;
				$Msign = $sign;
				$buffer = $v;
			} else {
				if ($sign == '/') {
					if ($v) {
						$buffer /= $v;
					} else {
						$err = 'dividing by zero';
					}
				}
				if ($sign == '%') {
					if ($v) {
						$buffer %= $v;
					} else {
						$err = 'dividing by zero';
					}
				}
				if ($sign == '*') {
					$buffer *= $v;
				}
				if ($sign == '^') {
					$buffer = pow($buffer, $v);
				}
			}
		}
		$number = $Msign == '-' ? $number -= $buffer : $number += $buffer;
		return $err ? 'ERROR: ' . $err : $number;
	}

	/**
	 * Calculates the input with parenthesis levels
	 * Usage: 2
	 *
	 * @param	string		Input string, eg "(123 + 456) / 789 - 4"
	 * @return	integer		Calculated value. Or error string.
	 * @see calcPriority(), tslib_cObj::stdWrap()
	 */
	public static function calcParenthesis($string) {
		$securC = 100;
		do {
			$valueLenO = strcspn($string, '(');
			$valueLenC = strcspn($string, ')');
			if ($valueLenC == strlen($string) || $valueLenC < $valueLenO) {
				$value = self::calcPriority(substr($string, 0, $valueLenC));
				$string = $value . substr($string, $valueLenC + 1);
				return $string;
			} else {
				$string = substr($string, 0, $valueLenO) . self::calcParenthesis(substr($string, $valueLenO + 1));
			}
				// Security:
			$securC--;
			if ($securC <= 0) {
				break;
			}
		} while ($valueLenO < strlen($string));
		return $string;
	}

	/**
	 * Inverse version of htmlspecialchars()
	 * Usage: 4
	 *
	 * @param	string		Value where &gt;, &lt;, &quot; and &amp; should be converted to regular chars.
	 * @return	string		Converted result.
	 */
	public static function htmlspecialchars_decode($value) {
		$value = str_replace('&gt;', '>', $value);
		$value = str_replace('&lt;', '<', $value);
		$value = str_replace('&quot;', '"', $value);
		$value = str_replace('&amp;', '&', $value);
		return $value;
	}

	/**
	 * Re-converts HTML entities if they have been converted by htmlspecialchars()
	 * Usage: 10
	 *
	 * @param	string		String which contains eg. "&amp;amp;" which should stay "&amp;". Or "&amp;#1234;" to "&#1234;". Or "&amp;#x1b;" to "&#x1b;"
	 * @return	string		Converted result.
	 */
	public static function deHSCentities($str) {
		return preg_replace('/&amp;([#[:alnum:]]*;)/', '&\1', $str);
	}

	/**
	 * This function is used to escape any ' -characters when transferring text to JavaScript!
	 * Usage: 3
	 *
	 * @param	string		String to escape
	 * @param	boolean		If set, also backslashes are escaped.
	 * @param	string		The character to escape, default is ' (single-quote)
	 * @return	string		Processed input string
	 */
	public static function slashJS($string, $extended = 0, $char = "'") {
		if ($extended) {
			$string = str_replace("\\", "\\\\", $string);
		}
		return str_replace($char, "\\" . $char, $string);
	}

	/**
	 * Version of rawurlencode() where all spaces (%20) are re-converted to space-characters.
	 * Usefull when passing text to JavaScript where you simply url-encode it to get around problems with syntax-errors, linebreaks etc.
	 * Usage: 4
	 *
	 * @param	string		String to raw-url-encode with spaces preserved
	 * @return	string		Rawurlencoded result of input string, but with all %20 (space chars) converted to real spaces.
	 */
	public static function rawUrlEncodeJS($str) {
		return str_replace('%20', ' ', rawurlencode($str));
	}

	/**
	 * rawurlencode which preserves "/" chars
	 * Usefull when filepaths should keep the "/" chars, but have all other special chars encoded.
	 * Usage: 5
	 *
	 * @param	string		Input string
	 * @return	string		Output string
	 */
	public static function rawUrlEncodeFP($str) {
		return str_replace('%2F', '/', rawurlencode($str));
	}

	/**
	 * Checking syntax of input email address
	 * Usage: 5
	 *
	 * @param	string		Input string to evaluate
	 * @return	boolean		Returns true if the $email address (input string) is valid
	 */
	public static function validEmail($email) {
			// enforce maximum length to prevent libpcre recursion crash bug #52929 in PHP
			// fixed in PHP 5.2+ later than Sept 2010; length restriction per SMTP RFC 2821
		if (strlen($email) > 320) {
			return FALSE;
		}
		return (filter_var($email, FILTER_VALIDATE_EMAIL) !== FALSE);
	}

	/**
	 * Checks if current e-mail sending method does not accept recipient/sender name
	 * in a call to PHP mail() function. Windows version of mail() and mini_sendmail
	 * program are known not to process such input correctly and they cause SMTP
	 * errors. This function will return true if current mail sending method has
	 * problem with recipient name in recipient/sender argument for mail().
	 *
	 * TODO: 4.3 should have additional configuration variable, which is combined
	 * by || with the rest in this function.
	 *
	 * @return	boolean	true if mail() does not accept recipient name
	 */
	public static function isBrokenEmailEnvironment() {
		return TYPO3_OS == 'WIN' || (FALSE !== strpos(ini_get('sendmail_path'), 'mini_sendmail'));
	}

	/**
	 * Changes from/to arguments for mail() function to work in any environment.
	 *
	 * @param	string	$address	Address to adjust
	 * @return	string	Adjusted address
	 * @see	t3lib_::isBrokenEmailEnvironment()
	 */
	public static function normalizeMailAddress($address) {
		if (self::isBrokenEmailEnvironment() && FALSE !== ($pos1 = strrpos($address, '<'))) {
			$pos2 = strpos($address, '>', $pos1);
			$address = substr($address, $pos1 + 1, ($pos2 ? $pos2 : strlen($address)) - $pos1 - 1);
		}
		return $address;
	}

	/**
	 * Formats a string for output between <textarea>-tags
	 * All content outputted in a textarea form should be passed through this function
	 * Not only is the content htmlspecialchar'ed on output but there is also a single newline added in the top. The newline is necessary because browsers will ignore the first newline after <textarea> if that is the first character. Therefore better set it!
	 * Usage: 23
	 *
	 * @param	string		Input string to be formatted.
	 * @return	string		Formatted for <textarea>-tags
	 */
	public static function formatForTextarea($content) {
		return LF . htmlspecialchars($content);
	}

	/**
	 * Converts string to uppercase
	 * The function converts all Latin characters (a-z, but no accents, etc) to
	 * uppercase. It is safe for all supported character sets (incl. utf-8).
	 * Unlike strtoupper() it does not honour the locale.
	 *
	 * @param   string	  Input string
	 * @return  string	  Uppercase String
	 */
	public static function strtoupper($str) {
		return strtr((string) $str, 'abcdefghijklmnopqrstuvwxyz', 'ABCDEFGHIJKLMNOPQRSTUVWXYZ');
	}

	/**
	 * Converts string to lowercase
	 * The function converts all Latin characters (A-Z, but no accents, etc) to
	 * lowercase. It is safe for all supported character sets (incl. utf-8).
	 * Unlike strtolower() it does not honour the locale.
	 *
	 * @param	string		Input string
	 * @return	string		Lowercase String
	 */
	public static function strtolower($str) {
		return strtr((string) $str, 'ABCDEFGHIJKLMNOPQRSTUVWXYZ', 'abcdefghijklmnopqrstuvwxyz');
	}

	/**
	 * Returns a string of highly randomized bytes (over the full 8-bit range).
	 *
	 * @copyright	Drupal CMS
	 * @license		GNU General Public License version 2
	 * @param		integer  Number of characters (bytes) to return
	 * @return		string   Random Bytes
	 */
	public static function generateRandomBytes($count) {
		$output = '';
			// /dev/urandom is available on many *nix systems and is considered
			// the best commonly available pseudo-random source.
		if (TYPO3_OS != 'WIN' && ($fh = @fopen('/dev/urandom', 'rb'))) {
			$output = fread($fh, $count);
			fclose($fh);
		} elseif (TYPO3_OS == 'WIN') {
			if (class_exists('COM')) {
				try {
					$com = new COM('CAPICOM.Utilities.1');
					$output = base64_decode($com->GetRandom($count, 0));
				} catch (Exception $e) {
					// CAPICOM not installed
				}
			}
			if ($output === '' && version_compare(PHP_VERSION, '5.3.0', '>=')) {
				if (function_exists('mcrypt_create_iv')) {
					$output = mcrypt_create_iv($count, MCRYPT_DEV_URANDOM);
				} elseif (function_exists('openssl_random_pseudo_bytes')) {
					$isStrong = NULL;
					$output = openssl_random_pseudo_bytes($count, $isStrong);
						// skip ssl since it wasn't using the strong algo
					if ($isStrong !== TRUE) {
						$output = '';
					}
				}
			}
		}

			// fallback if other random byte generation failed until now
		if (!isset($output{$count - 1})) {
				// We initialize with the somewhat random.
			$randomState = $GLOBALS['TYPO3_CONF_VARS']['SYS']['encryptionKey']
					. base_convert(memory_get_usage() % pow(10, 6), 10, 2)
					. microtime() . uniqid('') . getmypid();
			while (!isset($output{$count - 1})) {
				$randomState = sha1(microtime() . mt_rand() . $randomState);
				$output .= sha1(mt_rand() . $randomState, TRUE);
			}
			$output = substr($output, strlen($output) - $count, $count);
		}
		return $output;
	}

	/**
	 * Returns a hex representation of a random byte string.
	 *
	 * @param		integer  Number of hex characters to return
	 * @return		string   Random Bytes
	 */
	public static function getRandomHexString($count) {
		return substr(bin2hex(self::generateRandomBytes(intval(($count + 1) / 2))), 0, $count);
	}

	/**
	 * Returns a given string with underscores as UpperCamelCase.
	 * Example: Converts blog_example to BlogExample
	 *
	 * @param	string		$string: String to be converted to camel case
	 * @return	string		UpperCamelCasedWord
	 */
	public static function underscoredToUpperCamelCase($string) {
		$upperCamelCase = str_replace(' ', '', ucwords(str_replace('_', ' ', self::strtolower($string))));
		return $upperCamelCase;
	}

	/**
	 * Returns a given string with underscores as lowerCamelCase.
	 * Example: Converts minimal_value to minimalValue
	 *
	 * @param	string		$string: String to be converted to camel case
	 * @return	string		lowerCamelCasedWord
	 */
	public static function underscoredToLowerCamelCase($string) {
		$upperCamelCase = str_replace(' ', '', ucwords(str_replace('_', ' ', self::strtolower($string))));
		$lowerCamelCase = self::lcfirst($upperCamelCase);
		return $lowerCamelCase;
	}

	/**
	 * Returns a given CamelCasedString as an lowercase string with underscores.
	 * Example: Converts BlogExample to blog_example, and minimalValue to minimal_value
	 *
	 * @param	string		$string: String to be converted to lowercase underscore
	 * @return	string		lowercase_and_underscored_string
	 */
	public static function camelCaseToLowerCaseUnderscored($string) {
		return self::strtolower(preg_replace('/(?<=\w)([A-Z])/', '_\\1', $string));
	}

	/**
	 * Converts the first char of a string to lowercase if it is a latin character (A-Z).
	 * Example: Converts "Hello World" to "hello World"
	 *
	 * @param	string		$string: The string to be used to lowercase the first character
	 * @return	string		The string with the first character as lowercase
	 */
	public static function lcfirst($string) {
		return self::strtolower(substr($string, 0, 1)) . substr($string, 1);
	}

	/**
	 * Checks if a given string is a Uniform Resource Locator (URL).
	 *
	 * @param	string		$url: The URL to be validated
	 * @return	boolean		Whether the given URL is valid
	 */
	public static function isValidUrl($url) {
		return (filter_var($url, FILTER_VALIDATE_URL, FILTER_FLAG_SCHEME_REQUIRED) !== FALSE);
	}


	/*************************
	 *
	 * ARRAY FUNCTIONS
	 *
	 *************************/

	/**
	 * Check if an string item exists in an array.
	 * Please note that the order of function parameters is reverse compared to the PHP function in_array()!!!
	 *
	 * Comparison to PHP in_array():
	 * -> $array = array(0, 1, 2, 3);
	 * -> variant_a := t3lib_div::inArray($array, $needle)
	 * -> variant_b := in_array($needle, $array)
	 * -> variant_c := in_array($needle, $array, true)
	 * +---------+-----------+-----------+-----------+
	 * | $needle | variant_a | variant_b | variant_c |
	 * +---------+-----------+-----------+-----------+
	 * | '1a'	| false	 | true	  | false	 |
	 * | ''	  | false	 | true	  | false	 |
	 * | '0'	 | true	  | true	  | false	 |
	 * | 0	   | true	  | true	  | true	  |
	 * +---------+-----------+-----------+-----------+
	 * Usage: 3
	 *
	 * @param	array		one-dimensional array of items
	 * @param	string		item to check for
	 * @return	boolean		true if $item is in the one-dimensional array $in_array
	 */
	public static function inArray(array $in_array, $item) {
		foreach ($in_array as $val) {
			if (!is_array($val) && !strcmp($val, $item)) {
				return TRUE;
			}
		}
		return FALSE;
	}

	/**
	 * Explodes a $string delimited by $delim and passes each item in the array through intval().
	 * Corresponds to t3lib_div::trimExplode(), but with conversion to integers for all values.
	 * Usage: 76
	 *
	 * @param	string		Delimiter string to explode with
	 * @param	string		The string to explode
	 * @param	boolean		If set, all empty values (='') will NOT be set in output
	 * @param	integer		If positive, the result will contain a maximum of limit elements,
	 *						 if negative, all components except the last -limit are returned,
	 *						 if zero (default), the result is not limited at all
	 * @return	array		Exploded values, all converted to integers
	 */
	public static function intExplode($delimiter, $string, $onlyNonEmptyValues = FALSE, $limit = 0) {
		$explodedValues = self::trimExplode($delimiter, $string, $onlyNonEmptyValues, $limit);
		return array_map('intval', $explodedValues);
	}

	/**
	 * Reverse explode which explodes the string counting from behind.
	 * Thus t3lib_div::revExplode(':','my:words:here',2) will return array('my:words','here')
	 * Usage: 8
	 *
	 * @param	string		Delimiter string to explode with
	 * @param	string		The string to explode
	 * @param	integer		Number of array entries
	 * @return	array		Exploded values
	 */
	public static function revExplode($delimiter, $string, $count = 0) {
		$explodedValues = explode($delimiter, strrev($string), $count);
		$explodedValues = array_map('strrev', $explodedValues);
		return array_reverse($explodedValues);
	}

	/**
	 * Explodes a string and trims all values for whitespace in the ends.
	 * If $onlyNonEmptyValues is set, then all blank ('') values are removed.
	 * Usage: 256
	 *
	 * @param	string		Delimiter string to explode with
	 * @param	string		The string to explode
	 * @param	boolean		If set, all empty values will be removed in output
	 * @param	integer		If positive, the result will contain a maximum of
	 *						 $limit elements, if negative, all components except
	 *						 the last -$limit are returned, if zero (default),
	 *						 the result is not limited at all. Attention though
	 *						 that the use of this parameter can slow down this
	 *						 function.
	 * @return	array		Exploded values
	 */
	public static function trimExplode($delim, $string, $removeEmptyValues = FALSE, $limit = 0) {
		$explodedValues = explode($delim, $string);

		$result = array_map('trim', $explodedValues);

		if ($removeEmptyValues) {
			$temp = array();
			foreach ($result as $value) {
				if ($value !== '') {
					$temp[] = $value;
				}
			}
			$result = $temp;
		}

		if ($limit != 0) {
			if ($limit < 0) {
				$result = array_slice($result, 0, $limit);
			} elseif (count($result) > $limit) {
				$lastElements = array_slice($result, $limit - 1);
				$result = array_slice($result, 0, $limit - 1);
				$result[] = implode($delim, $lastElements);
			}
		}

		return $result;
	}

	/**
	 * Remove duplicate values from an array
	 * Usage: 0
	 *
	 * @param	array		Array of values to make unique
	 * @return	array
	 * @ignore
	 * @deprecated since TYPO3 3.5, will be removed in TYPO3 4.6 - Use the PHP function array_unique instead
	 */
	public static function uniqueArray(array $valueArray) {
		self::logDeprecatedFunction();

		return array_unique($valueArray);
	}

	/**
	 * Removes the value $cmpValue from the $array if found there. Returns the modified array
	 * Usage: 3
	 *
	 * @param	array		Array containing the values
	 * @param	string		Value to search for and if found remove array entry where found.
	 * @return	array		Output array with entries removed if search string is found
	 */
	public static function removeArrayEntryByValue(array $array, $cmpValue) {
		foreach ($array as $k => $v) {
			if (is_array($v)) {
				$array[$k] = self::removeArrayEntryByValue($v, $cmpValue);
			} elseif (!strcmp($v, $cmpValue)) {
				unset($array[$k]);
			}
		}
		return $array;
	}

	/**
	 * Filters an array to reduce its elements to match the condition.
	 * The values in $keepItems can be optionally evaluated by a custom callback function.
	 *
	 * Example (arguments used to call this function):
	 * $array = array(
	 *		 array('aa' => array('first', 'second'),
	 *		 array('bb' => array('third', 'fourth'),
	 *		 array('cc' => array('fifth', 'sixth'),
	 * );
	 * $keepItems = array('third');
	 * $getValueFunc = create_function('$value', 'return $value[0];');
	 *
	 * Returns:
	 * array(
	 *		 array('bb' => array('third', 'fourth'),
	 * )
	 *
	 * @param	array		$array: The initial array to be filtered/reduced
	 * @param	mixed		$keepItems: The items which are allowed/kept in the array - accepts array or csv string
	 * @param	string		$getValueFunc: (optional) Unique function name set by create_function() used to get the value to keep
	 * @return	array		The filtered/reduced array with the kept items
	 */
	public static function keepItemsInArray(array $array, $keepItems, $getValueFunc = NULL) {
		if ($array) {
				// Convert strings to arrays:
			if (is_string($keepItems)) {
				$keepItems = self::trimExplode(',', $keepItems);
			}
				// create_function() returns a string:
			if (!is_string($getValueFunc)) {
				$getValueFunc = NULL;
			}
				// Do the filtering:
			if (is_array($keepItems) && count($keepItems)) {
				foreach ($array as $key => $value) {
						// Get the value to compare by using the callback function:
					$keepValue = (isset($getValueFunc) ? $getValueFunc($value) : $value);
					if (!in_array($keepValue, $keepItems)) {
						unset($array[$key]);
					}
				}
			}
		}
		return $array;
	}

	/**
	 * Implodes a multidim-array into GET-parameters (eg. &param[key][key2]=value2&param[key][key3]=value3)
	 * Usage: 24
	 *
	 * @param	string		Name prefix for entries. Set to blank if you wish none.
	 * @param	array		The (multidim) array to implode
	 * @param	string		(keep blank)
	 * @param	boolean		If set, parameters which were blank strings would be removed.
	 * @param	boolean		If set, the param name itself (for example "param[key][key2]") would be rawurlencoded as well.
	 * @return	string		Imploded result, fx. &param[key][key2]=value2&param[key][key3]=value3
	 * @see explodeUrl2Array()
	 */
	public static function implodeArrayForUrl($name, array $theArray, $str = '', $skipBlank = FALSE, $rawurlencodeParamName = FALSE) {
		foreach ($theArray as $Akey => $AVal) {
			$thisKeyName = $name ? $name . '[' . $Akey . ']' : $Akey;
			if (is_array($AVal)) {
				$str = self::implodeArrayForUrl($thisKeyName, $AVal, $str, $skipBlank, $rawurlencodeParamName);
			} else {
				if (!$skipBlank || strcmp($AVal, '')) {
					$str .= '&' . ($rawurlencodeParamName ? rawurlencode($thisKeyName) : $thisKeyName) .
							'=' . rawurlencode($AVal);
				}
			}
		}
		return $str;
	}

	/**
	 * Explodes a string with GETvars (eg. "&id=1&type=2&ext[mykey]=3") into an array
	 *
	 * @param	string		GETvars string
	 * @param	boolean		If set, the string will be parsed into a multidimensional array if square brackets are used in variable names (using PHP function parse_str())
	 * @return	array		Array of values. All values AND keys are rawurldecoded() as they properly should be. But this means that any implosion of the array again must rawurlencode it!
	 * @see implodeArrayForUrl()
	 */
	public static function explodeUrl2Array($string, $multidim = FALSE) {
		$output = array();
		if ($multidim) {
			parse_str($string, $output);
		} else {
			$p = explode('&', $string);
			foreach ($p as $v) {
				if (strlen($v)) {
					list($pK, $pV) = explode('=', $v, 2);
					$output[rawurldecode($pK)] = rawurldecode($pV);
				}
			}
		}
		return $output;
	}

	/**
	 * Returns an array with selected keys from incoming data.
	 * (Better read source code if you want to find out...)
	 * Usage: 3
	 *
	 * @param	string		List of variable/key names
	 * @param	array		Array from where to get values based on the keys in $varList
	 * @param	boolean		If set, then t3lib_div::_GP() is used to fetch the value if not found (isset) in the $getArray
	 * @return	array		Output array with selected variables.
	 */
	public static function compileSelectedGetVarsFromArray($varList, array $getArray, $GPvarAlt = 1) {
		$keys = self::trimExplode(',', $varList, 1);
		$outArr = array();
		foreach ($keys as $v) {
			if (isset($getArray[$v])) {
				$outArr[$v] = $getArray[$v];
			} elseif ($GPvarAlt) {
				$outArr[$v] = self::_GP($v);
			}
		}
		return $outArr;
	}

	/**
	 * AddSlash array
	 * This function traverses a multidimentional array and adds slashes to the values.
	 * NOTE that the input array is and argument by reference.!!
	 * Twin-function to stripSlashesOnArray
	 * Usage: 8
	 *
	 * @param	array		Multidimensional input array, (REFERENCE!)
	 * @return	array
	 */
	public static function addSlashesOnArray(array &$theArray) {
		foreach ($theArray as &$value) {
			if (is_array($value)) {
				self::addSlashesOnArray($value);
			} else {
				$value = addslashes($value);
			}
			unset($value);
		}
		reset($theArray);
	}

	/**
	 * StripSlash array
	 * This function traverses a multidimentional array and strips slashes to the values.
	 * NOTE that the input array is and argument by reference.!!
	 * Twin-function to addSlashesOnArray
	 * Usage: 10
	 *
	 * @param	array		Multidimensional input array, (REFERENCE!)
	 * @return	array
	 */
	public static function stripSlashesOnArray(array &$theArray) {
		foreach ($theArray as &$value) {
			if (is_array($value)) {
				self::stripSlashesOnArray($value);
			} else {
				$value = stripslashes($value);
			}
			unset($value);
		}
		reset($theArray);
	}

	/**
	 * Either slashes ($cmd=add) or strips ($cmd=strip) array $arr depending on $cmd
	 * Usage: 0
	 *
	 * @param	array		Multidimensional input array
	 * @param	string		"add" or "strip", depending on usage you wish.
	 * @return	array
	 */
	public static function slashArray(array $arr, $cmd) {
		if ($cmd == 'strip') {
			self::stripSlashesOnArray($arr);
		}
		if ($cmd == 'add') {
			self::addSlashesOnArray($arr);
		}
		return $arr;
	}

	/**
	 * Rename Array keys with a given mapping table
	 * @param	array	Array by reference which should be remapped
	 * @param	array	Array with remap information, array/$oldKey => $newKey)
	 */
	function remapArrayKeys(&$array, $mappingTable) {
		if (is_array($mappingTable)) {
			foreach ($mappingTable as $old => $new) {
				if ($new && isset($array[$old])) {
					$array[$new] = $array[$old];
					unset ($array[$old]);
				}
			}
		}
	}


	/**
	 * Merges two arrays recursively and "binary safe" (integer keys are
	 * overridden as well), overruling similar values in the first array
	 * ($arr0) with the values of the second array ($arr1)
	 * In case of identical keys, ie. keeping the values of the second.
	 * Usage: 0
	 *
	 * @param	array		First array
	 * @param	array		Second array, overruling the first array
	 * @param	boolean		If set, keys that are NOT found in $arr0 (first array) will not be set. Thus only existing value can/will be overruled from second array.
	 * @param	boolean		If set, values from $arr1 will overrule if they are empty or zero. Default: true
	 * @return	array		Resulting array where $arr1 values has overruled $arr0 values
	 */
	public static function array_merge_recursive_overrule(array $arr0, array $arr1, $notAddKeys = 0, $includeEmtpyValues = TRUE) {
		foreach ($arr1 as $key => $val) {
			if (is_array($arr0[$key])) {
				if (is_array($arr1[$key])) {
					$arr0[$key] = self::array_merge_recursive_overrule($arr0[$key], $arr1[$key], $notAddKeys, $includeEmtpyValues);
				}
			} else {
				if ($notAddKeys) {
					if (isset($arr0[$key])) {
						if ($includeEmtpyValues || $val) {
							$arr0[$key] = $val;
						}
					}
				} else {
					if ($includeEmtpyValues || $val) {
						$arr0[$key] = $val;
					}
				}
			}
		}
		reset($arr0);
		return $arr0;
	}

	/**
	 * An array_merge function where the keys are NOT renumbered as they happen to be with the real php-array_merge function. It is "binary safe" in the sense that integer keys are overridden as well.
	 * Usage: 16
	 *
	 * @param	array		First array
	 * @param	array		Second array
	 * @return	array		Merged result.
	 */
	public static function array_merge(array $arr1, array $arr2) {
		return $arr2 + $arr1;
	}

	/**
	 * Filters keys off from first array that also exist in second array. Comparision is done by keys.
	 * This method is a recursive version of php array_diff_assoc()
	 *
	 * @param	array		Source array
	 * @param	array		Reduce source array by this array
	 * @return	array		Source array reduced by keys also present in second array
	 */
	public static function arrayDiffAssocRecursive(array $array1, array $array2) {
		$differenceArray = array();
		foreach ($array1 as $key => $value) {
			if (!array_key_exists($key, $array2)) {
				$differenceArray[$key] = $value;
			} elseif (is_array($value)) {
				if (is_array($array2[$key])) {
					$differenceArray[$key] = self::arrayDiffAssocRecursive($value, $array2[$key]);
				}
			}
		}

		return $differenceArray;
	}

	/**
	 * Takes a row and returns a CSV string of the values with $delim (default is ,) and $quote (default is ") as separator chars.
	 * Usage: 5
	 *
	 * @param	array		Input array of values
	 * @param	string		Delimited, default is comman
	 * @param	string		Quote-character to wrap around the values.
	 * @return	string		A single line of CSV
	 */
	public static function csvValues(array $row, $delim = ',', $quote = '"') {
		reset($row);
		$out = array();
		foreach ($row as $value) {
			$out[] = str_replace($quote, $quote . $quote, $value);
		}
		$str = $quote . implode($quote . $delim . $quote, $out) . $quote;
		return $str;
	}

	/**
	 * Creates recursively a JSON literal from a multidimensional associative array.
	 * Uses native function of PHP >= 5.2.0
	 *
	 * @param	array		$jsonArray: The array to be transformed to JSON
	 * @return	string		JSON string
	 * @deprecated since TYPO3 4.3, will be removed in TYPO3 4.6 - use PHP native function json_encode() instead, will be removed in TYPO3 4.5
	 */
	public static function array2json(array $jsonArray) {
		self::logDeprecatedFunction();

		return json_encode($jsonArray);
	}

	/**
	 * Removes dots "." from end of a key identifier of TypoScript styled array.
	 * array('key.' => array('property.' => 'value')) --> array('key' => array('property' => 'value'))
	 *
	 * @param	array	$ts: TypoScript configuration array
	 * @return	array	TypoScript configuration array without dots at the end of all keys
	 */
	public static function removeDotsFromTS(array $ts) {
		$out = array();
		foreach ($ts as $key => $value) {
			if (is_array($value)) {
				$key = rtrim($key, '.');
				$out[$key] = self::removeDotsFromTS($value);
			} else {
				$out[$key] = $value;
			}
		}
		return $out;
	}

	/**
	 * Sorts an array by key recursive - uses natural sort order (aAbB-zZ)
	 *
	 * @param  array $array  array to be sorted recursively, passed by reference
	 * @return boolean TRUE if param is an array
	 */
	public static function naturalKeySortRecursive(&$array) {
		if (!is_array($array)) {
			return FALSE;
		}
		uksort($array, 'strnatcasecmp');
		foreach ($array as $key => $value) {
			self::naturalKeySortRecursive($array[$key]);
		}
		return TRUE;
	}


	/*************************
	 *
	 * HTML/XML PROCESSING
	 *
	 *************************/

	/**
	 * Returns an array with all attributes of the input HTML tag as key/value pairs. Attributes are only lowercase a-z
	 * $tag is either a whole tag (eg '<TAG OPTION ATTRIB=VALUE>') or the parameterlist (ex ' OPTION ATTRIB=VALUE>')
	 * If an attribute is empty, then the value for the key is empty. You can check if it existed with isset()
	 * Usage: 8
	 *
	 * @param	string		HTML-tag string (or attributes only)
	 * @return	array		Array with the attribute values.
	 */
	public static function get_tag_attributes($tag) {
		$components = self::split_tag_attributes($tag);
		$name = ''; // attribute name is stored here
		$valuemode = FALSE;
		$attributes = array();
		foreach ($components as $key => $val) {
			if ($val != '=') { // Only if $name is set (if there is an attribute, that waits for a value), that valuemode is enabled. This ensures that the attribute is assigned it's value
				if ($valuemode) {
					if ($name) {
						$attributes[$name] = $val;
						$name = '';
					}
				} else {
					if ($key = strtolower(preg_replace('/[^a-zA-Z0-9]/', '', $val))) {
						$attributes[$key] = '';
						$name = $key;
					}
				}
				$valuemode = FALSE;
			} else {
				$valuemode = TRUE;
			}
		}
		return $attributes;
	}

	/**
	 * Returns an array with the 'components' from an attribute list from an HTML tag. The result is normally analyzed by get_tag_attributes
	 * Removes tag-name if found
	 * Usage: 2
	 *
	 * @param	string		HTML-tag string (or attributes only)
	 * @return	array		Array with the attribute values.
	 */
	public static function split_tag_attributes($tag) {
		$tag_tmp = trim(preg_replace('/^<[^[:space:]]*/', '', trim($tag)));
			// Removes any > in the end of the string
		$tag_tmp = trim(rtrim($tag_tmp, '>'));

		$value = array();
		while (strcmp($tag_tmp, '')) { // Compared with empty string instead , 030102
			$firstChar = substr($tag_tmp, 0, 1);
			if (!strcmp($firstChar, '"') || !strcmp($firstChar, "'")) {
				$reg = explode($firstChar, $tag_tmp, 3);
				$value[] = $reg[1];
				$tag_tmp = trim($reg[2]);
			} elseif (!strcmp($firstChar, '=')) {
				$value[] = '=';
				$tag_tmp = trim(substr($tag_tmp, 1)); // Removes = chars.
			} else {
					// There are '' around the value. We look for the next ' ' or '>'
				$reg = preg_split('/[[:space:]=]/', $tag_tmp, 2);
				$value[] = trim($reg[0]);
				$tag_tmp = trim(substr($tag_tmp, strlen($reg[0]), 1) . $reg[1]);
			}
		}
		reset($value);
		return $value;
	}

	/**
	 * Implodes attributes in the array $arr for an attribute list in eg. and HTML tag (with quotes)
	 * Usage: 14
	 *
	 * @param	array		Array with attribute key/value pairs, eg. "bgcolor"=>"red", "border"=>0
	 * @param	boolean		If set the resulting attribute list will have a) all attributes in lowercase (and duplicates weeded out, first entry taking precedence) and b) all values htmlspecialchar()'ed. It is recommended to use this switch!
	 * @param	boolean		If true, don't check if values are blank. Default is to omit attributes with blank values.
	 * @return	string		Imploded attributes, eg. 'bgcolor="red" border="0"'
	 */
	public static function implodeAttributes(array $arr, $xhtmlSafe = FALSE, $dontOmitBlankAttribs = FALSE) {
		if ($xhtmlSafe) {
			$newArr = array();
			foreach ($arr as $p => $v) {
				if (!isset($newArr[strtolower($p)])) {
					$newArr[strtolower($p)] = htmlspecialchars($v);
				}
			}
			$arr = $newArr;
		}
		$list = array();
		foreach ($arr as $p => $v) {
			if (strcmp($v, '') || $dontOmitBlankAttribs) {
				$list[] = $p . '="' . $v . '"';
			}
		}
		return implode(' ', $list);
	}

	/**
	 * Implodes attributes in the array $arr for an attribute list in eg. and HTML tag (with quotes)
	 *
	 * @param	array		See implodeAttributes()
	 * @param	boolean		See implodeAttributes()
	 * @param	boolean		See implodeAttributes()
	 * @return	string		See implodeAttributes()
	 * @deprecated since TYPO3 3.7, will be removed in TYPO3 4.6 - Name was changed into implodeAttributes
	 * @see implodeAttributes()
	 */
	public static function implodeParams(array $arr, $xhtmlSafe = FALSE, $dontOmitBlankAttribs = FALSE) {
		self::logDeprecatedFunction();

		return self::implodeAttributes($arr, $xhtmlSafe, $dontOmitBlankAttribs);
	}

	/**
	 * Wraps JavaScript code XHTML ready with <script>-tags
	 * Automatic re-identing of the JS code is done by using the first line as ident reference.
	 * This is nice for identing JS code with PHP code on the same level.
	 *
	 * @param	string		JavaScript code
	 * @param	boolean		Wrap script element in linebreaks? Default is TRUE.
	 * @return	string		The wrapped JS code, ready to put into a XHTML page
	 * @author	Ingmar Schlecht <ingmars@web.de>
	 * @author	René Fritz <r.fritz@colorcube.de>
	 */
	public static function wrapJS($string, $linebreak = TRUE) {
		if (trim($string)) {
				// <script wrapped in nl?
			$cr = $linebreak ? LF : '';

				// remove nl from the beginning
			$string = preg_replace('/^\n+/', '', $string);
				// re-ident to one tab using the first line as reference
			$match = array();
			if (preg_match('/^(\t+)/', $string, $match)) {
				$string = str_replace($match[1], TAB, $string);
			}
			$string = $cr . '<script type="text/javascript">
/*<![CDATA[*/
' . $string . '
/*]]>*/
</script>' . $cr;
		}
		return trim($string);
	}


	/**
	 * Parses XML input into a PHP array with associative keys
	 * Usage: 0
	 *
	 * @param	string		XML data input
	 * @param	integer		Number of element levels to resolve the XML into an array. Any further structure will be set as XML.
	 * @return	mixed		The array with the parsed structure unless the XML parser returns with an error in which case the error message string is returned.
	 * @author bisqwit at iki dot fi dot not dot for dot ads dot invalid / http://dk.php.net/xml_parse_into_struct + kasperYYYY@typo3.com
	 */
	public static function xml2tree($string, $depth = 999) {
		$parser = xml_parser_create();
		$vals = array();
		$index = array();

		xml_parser_set_option($parser, XML_OPTION_CASE_FOLDING, 0);
		xml_parser_set_option($parser, XML_OPTION_SKIP_WHITE, 0);
		xml_parse_into_struct($parser, $string, $vals, $index);

		if (xml_get_error_code($parser)) {
			return 'Line ' . xml_get_current_line_number($parser) . ': ' . xml_error_string(xml_get_error_code($parser));
		}
		xml_parser_free($parser);

		$stack = array(array());
		$stacktop = 0;
		$startPoint = 0;

		$tagi = array();
		foreach ($vals as $key => $val) {
			$type = $val['type'];

				// open tag:
			if ($type == 'open' || $type == 'complete') {
				$stack[$stacktop++] = $tagi;

				if ($depth == $stacktop) {
					$startPoint = $key;
				}

				$tagi = array('tag' => $val['tag']);

				if (isset($val['attributes'])) {
					$tagi['attrs'] = $val['attributes'];
				}
				if (isset($val['value'])) {
					$tagi['values'][] = $val['value'];
				}
			}
				// finish tag:
			if ($type == 'complete' || $type == 'close') {
				$oldtagi = $tagi;
				$tagi = $stack[--$stacktop];
				$oldtag = $oldtagi['tag'];
				unset($oldtagi['tag']);

				if ($depth == ($stacktop + 1)) {
					if ($key - $startPoint > 0) {
						$partArray = array_slice(
							$vals,
								$startPoint + 1,
								$key - $startPoint - 1
						);
						#$oldtagi=array('XMLvalue'=>self::xmlRecompileFromStructValArray($partArray));
						$oldtagi['XMLvalue'] = self::xmlRecompileFromStructValArray($partArray);
					} else {
						$oldtagi['XMLvalue'] = $oldtagi['values'][0];
					}
				}

				$tagi['ch'][$oldtag][] = $oldtagi;
				unset($oldtagi);
			}
				// cdata
			if ($type == 'cdata') {
				$tagi['values'][] = $val['value'];
			}
		}
		return $tagi['ch'];
	}

	/**
	 * Turns PHP array into XML. See array2xml()
	 *
	 * @param	array		The input PHP array with any kind of data; text, binary, integers. Not objects though.
	 * @param	string		Alternative document tag. Default is "phparray".
	 * @param	array		Options for the compilation. See array2xml() for description.
	 * @param	string		Forced charset to prologue
	 * @return	string		An XML string made from the input content in the array.
	 * @see xml2array(),array2xml()
	 */
	public static function array2xml_cs(array $array, $docTag = 'phparray', array $options = array(), $charset = '') {

			// Figure out charset if not given explicitly:
		if (!$charset) {
			if ($GLOBALS['TYPO3_CONF_VARS']['BE']['forceCharset']) { // First priority: forceCharset! If set, this will be authoritative!
				$charset = $GLOBALS['TYPO3_CONF_VARS']['BE']['forceCharset'];
			} elseif (is_object($GLOBALS['LANG'])) {
				$charset = $GLOBALS['LANG']->charSet; // If "LANG" is around, that will hold the current charset
			} else {
				$charset = 'iso-8859-1'; // THIS is just a hopeful guess!
			}
		}

			// Return XML:
		return '<?xml version="1.0" encoding="' . htmlspecialchars($charset) . '" standalone="yes" ?>' . LF .
				self::array2xml($array, '', 0, $docTag, 0, $options);
	}

	/**
	 * Deprecated to call directly (unless you are aware of using XML prologues)! Use "array2xml_cs" instead (which adds an XML-prologue)
	 *
	 * Converts a PHP array into an XML string.
	 * The XML output is optimized for readability since associative keys are used as tagnames.
	 * This also means that only alphanumeric characters are allowed in the tag names AND only keys NOT starting with numbers (so watch your usage of keys!). However there are options you can set to avoid this problem.
	 * Numeric keys are stored with the default tagname "numIndex" but can be overridden to other formats)
	 * The function handles input values from the PHP array in a binary-safe way; All characters below 32 (except 9,10,13) will trigger the content to be converted to a base64-string
	 * The PHP variable type of the data IS preserved as long as the types are strings, arrays, integers and booleans. Strings are the default type unless the "type" attribute is set.
	 * The output XML has been tested with the PHP XML-parser and parses OK under all tested circumstances with 4.x versions. However, with PHP5 there seems to be the need to add an XML prologue a la <?xml version="1.0" encoding="[charset]" standalone="yes" ?> - otherwise UTF-8 is assumed! Unfortunately, many times the output from this function is used without adding that prologue meaning that non-ASCII characters will break the parsing!! This suchs of course! Effectively it means that the prologue should always be prepended setting the right characterset, alternatively the system should always run as utf-8!
	 * However using MSIE to read the XML output didn't always go well: One reason could be that the character encoding is not observed in the PHP data. The other reason may be if the tag-names are invalid in the eyes of MSIE. Also using the namespace feature will make MSIE break parsing. There might be more reasons...
	 * Usage: 5
	 *
	 * @param	array		The input PHP array with any kind of data; text, binary, integers. Not objects though.
	 * @param	string		tag-prefix, eg. a namespace prefix like "T3:"
	 * @param	integer		Current recursion level. Don't change, stay at zero!
	 * @param	string		Alternative document tag. Default is "phparray".
	 * @param	integer		If greater than zero, then the number of spaces corresponding to this number is used for indenting, if less than zero - no indentation, if zero - a single TAB is used
	 * @param	array		Options for the compilation. Key "useNindex" => 0/1 (boolean: whether to use "n0, n1, n2" for num. indexes); Key "useIndexTagForNum" => "[tag for numerical indexes]"; Key "useIndexTagForAssoc" => "[tag for associative indexes"; Key "parentTagMap" => array('parentTag' => 'thisLevelTag')
	 * @param	string		Stack data. Don't touch.
	 * @return	string		An XML string made from the input content in the array.
	 * @see xml2array()
	 */
	public static function array2xml(array $array, $NSprefix = '', $level = 0, $docTag = 'phparray', $spaceInd = 0, array $options = array(), array $stackData = array()) {
			// The list of byte values which will trigger binary-safe storage. If any value has one of these char values in it, it will be encoded in base64
		$binaryChars = chr(0) . chr(1) . chr(2) . chr(3) . chr(4) . chr(5) . chr(6) . chr(7) . chr(8) .
				chr(11) . chr(12) . chr(14) . chr(15) . chr(16) . chr(17) . chr(18) . chr(19) .
				chr(20) . chr(21) . chr(22) . chr(23) . chr(24) . chr(25) . chr(26) . chr(27) . chr(28) . chr(29) .
				chr(30) . chr(31);
			// Set indenting mode:
		$indentChar = $spaceInd ? ' ' : TAB;
		$indentN = $spaceInd > 0 ? $spaceInd : 1;
		$nl = ($spaceInd >= 0 ? LF : '');

			// Init output variable:
		$output = '';

			// Traverse the input array
		foreach ($array as $k => $v) {
			$attr = '';
			$tagName = $k;

				// Construct the tag name.
			if (isset($options['grandParentTagMap'][$stackData['grandParentTagName'] . '/' . $stackData['parentTagName']])) { // Use tag based on grand-parent + parent tag name
				$attr .= ' index="' . htmlspecialchars($tagName) . '"';
				$tagName = (string) $options['grandParentTagMap'][$stackData['grandParentTagName'] . '/' . $stackData['parentTagName']];
			} elseif (isset($options['parentTagMap'][$stackData['parentTagName'] . ':_IS_NUM']) && self::testInt($tagName)) { // Use tag based on parent tag name + if current tag is numeric
				$attr .= ' index="' . htmlspecialchars($tagName) . '"';
				$tagName = (string) $options['parentTagMap'][$stackData['parentTagName'] . ':_IS_NUM'];
			} elseif (isset($options['parentTagMap'][$stackData['parentTagName'] . ':' . $tagName])) { // Use tag based on parent tag name + current tag
				$attr .= ' index="' . htmlspecialchars($tagName) . '"';
				$tagName = (string) $options['parentTagMap'][$stackData['parentTagName'] . ':' . $tagName];
			} elseif (isset($options['parentTagMap'][$stackData['parentTagName']])) { // Use tag based on parent tag name:
				$attr .= ' index="' . htmlspecialchars($tagName) . '"';
				$tagName = (string) $options['parentTagMap'][$stackData['parentTagName']];
			} elseif (!strcmp(intval($tagName), $tagName)) { // If integer...;
				if ($options['useNindex']) { // If numeric key, prefix "n"
					$tagName = 'n' . $tagName;
				} else { // Use special tag for num. keys:
					$attr .= ' index="' . $tagName . '"';
					$tagName = $options['useIndexTagForNum'] ? $options['useIndexTagForNum'] : 'numIndex';
				}
			} elseif ($options['useIndexTagForAssoc']) { // Use tag for all associative keys:
				$attr .= ' index="' . htmlspecialchars($tagName) . '"';
				$tagName = $options['useIndexTagForAssoc'];
			}

				// The tag name is cleaned up so only alphanumeric chars (plus - and _) are in there and not longer than 100 chars either.
			$tagName = substr(preg_replace('/[^[:alnum:]_-]/', '', $tagName), 0, 100);

				// If the value is an array then we will call this function recursively:
			if (is_array($v)) {

					// Sub elements:
				if ($options['alt_options'][$stackData['path'] . '/' . $tagName]) {
					$subOptions = $options['alt_options'][$stackData['path'] . '/' . $tagName];
					$clearStackPath = $subOptions['clearStackPath'];
				} else {
					$subOptions = $options;
					$clearStackPath = FALSE;
				}

				$content = $nl .
						self::array2xml(
							$v,
							$NSprefix,
								$level + 1,
							'',
							$spaceInd,
							$subOptions,
							array(
								'parentTagName' => $tagName,
								'grandParentTagName' => $stackData['parentTagName'],
								'path' => $clearStackPath ? '' : $stackData['path'] . '/' . $tagName,
							)
						) .
						($spaceInd >= 0 ? str_pad('', ($level + 1) * $indentN, $indentChar) : '');
				if ((int) $options['disableTypeAttrib'] != 2) { // Do not set "type = array". Makes prettier XML but means that empty arrays are not restored with xml2array
					$attr .= ' type="array"';
				}
			} else { // Just a value:

					// Look for binary chars:
				$vLen = strlen($v); // check for length, because PHP 5.2.0 may crash when first argument of strcspn is empty
				if ($vLen && strcspn($v, $binaryChars) != $vLen) { // Go for base64 encoding if the initial segment NOT matching any binary char has the same length as the whole string!
						// If the value contained binary chars then we base64-encode it an set an attribute to notify this situation:
					$content = $nl . chunk_split(base64_encode($v));
					$attr .= ' base64="1"';
				} else {
						// Otherwise, just htmlspecialchar the stuff:
					$content = htmlspecialchars($v);
					$dType = gettype($v);
					if ($dType == 'string') {
						if ($options['useCDATA'] && $content != $v) {
							$content = '<![CDATA[' . $v . ']]>';
						}
					} elseif (!$options['disableTypeAttrib']) {
						$attr .= ' type="' . $dType . '"';
					}
				}
			}

				// Add the element to the output string:
			$output .= ($spaceInd >= 0 ? str_pad('', ($level + 1) * $indentN, $indentChar) : '') . '<' . $NSprefix . $tagName . $attr . '>' . $content . '</' . $NSprefix . $tagName . '>' . $nl;
		}

			// If we are at the outer-most level, then we finally wrap it all in the document tags and return that as the value:
		if (!$level) {
			$output =
					'<' . $docTag . '>' . $nl .
							$output .
							'</' . $docTag . '>';
		}

		return $output;
	}

	/**
	 * Converts an XML string to a PHP array.
	 * This is the reverse function of array2xml()
	 * This is a wrapper for xml2arrayProcess that adds a two-level cache
	 * Usage: 17
	 *
	 * @param	string		XML content to convert into an array
	 * @param	string		The tag-prefix resolve, eg. a namespace like "T3:"
	 * @param	boolean		If set, the document tag will be set in the key "_DOCUMENT_TAG" of the output array
	 * @return	mixed		If the parsing had errors, a string with the error message is returned. Otherwise an array with the content.
	 * @see array2xml(),xml2arrayProcess()
	 * @author	Fabrizio Branca <typo3@fabrizio-branca.de> (added caching)
	 */
	public static function xml2array($string, $NSprefix = '', $reportDocTag = FALSE) {
		static $firstLevelCache = array();

		$identifier = md5($string . $NSprefix . ($reportDocTag ? '1' : '0'));

			// look up in first level cache
		if (!empty($firstLevelCache[$identifier])) {
			$array = $firstLevelCache[$identifier];
		} else {
				// look up in second level cache
			$cacheContent = t3lib_pageSelect::getHash($identifier, 0);
			$array = unserialize($cacheContent);

			if ($array === FALSE) {
				$array = self::xml2arrayProcess($string, $NSprefix, $reportDocTag);
				t3lib_pageSelect::storeHash($identifier, serialize($array), 'ident_xml2array');
			}
				// store content in first level cache
			$firstLevelCache[$identifier] = $array;
		}
		return $array;
	}

	/**
	 * Converts an XML string to a PHP array.
	 * This is the reverse function of array2xml()
	 * Usage: 1
	 *
	 * @param	string		XML content to convert into an array
	 * @param	string		The tag-prefix resolve, eg. a namespace like "T3:"
	 * @param	boolean		If set, the document tag will be set in the key "_DOCUMENT_TAG" of the output array
	 * @return	mixed		If the parsing had errors, a string with the error message is returned. Otherwise an array with the content.
	 * @see array2xml()
	 */
	protected function xml2arrayProcess($string, $NSprefix = '', $reportDocTag = FALSE) {
		global $TYPO3_CONF_VARS;

			// Create parser:
		$parser = xml_parser_create();
		$vals = array();
		$index = array();

		xml_parser_set_option($parser, XML_OPTION_CASE_FOLDING, 0);
		xml_parser_set_option($parser, XML_OPTION_SKIP_WHITE, 0);

			// default output charset is UTF-8, only ASCII, ISO-8859-1 and UTF-8 are supported!!!
		$match = array();
		preg_match('/^[[:space:]]*<\?xml[^>]*encoding[[:space:]]*=[[:space:]]*"([^"]*)"/', substr($string, 0, 200), $match);
		$theCharset = $match[1] ? $match[1] : ($TYPO3_CONF_VARS['BE']['forceCharset'] ? $TYPO3_CONF_VARS['BE']['forceCharset'] : 'iso-8859-1');
		xml_parser_set_option($parser, XML_OPTION_TARGET_ENCODING, $theCharset); // us-ascii / utf-8 / iso-8859-1

			// Parse content:
		xml_parse_into_struct($parser, $string, $vals, $index);

			// If error, return error message:
		if (xml_get_error_code($parser)) {
			return 'Line ' . xml_get_current_line_number($parser) . ': ' . xml_error_string(xml_get_error_code($parser));
		}
		xml_parser_free($parser);

			// Init vars:
		$stack = array(array());
		$stacktop = 0;
		$current = array();
		$tagName = '';
		$documentTag = '';

			// Traverse the parsed XML structure:
		foreach ($vals as $key => $val) {

				// First, process the tag-name (which is used in both cases, whether "complete" or "close")
			$tagName = $val['tag'];
			if (!$documentTag) {
				$documentTag = $tagName;
			}

				// Test for name space:
			$tagName = ($NSprefix && substr($tagName, 0, strlen($NSprefix)) == $NSprefix) ? substr($tagName, strlen($NSprefix)) : $tagName;

				// Test for numeric tag, encoded on the form "nXXX":
			$testNtag = substr($tagName, 1); // Closing tag.
			$tagName = (substr($tagName, 0, 1) == 'n' && !strcmp(intval($testNtag), $testNtag)) ? intval($testNtag) : $tagName;

				// Test for alternative index value:
			if (strlen($val['attributes']['index'])) {
				$tagName = $val['attributes']['index'];
			}

				// Setting tag-values, manage stack:
			switch ($val['type']) {
				case 'open': // If open tag it means there is an array stored in sub-elements. Therefore increase the stackpointer and reset the accumulation array:
					$current[$tagName] = array(); // Setting blank place holder
					$stack[$stacktop++] = $current;
					$current = array();
					break;
				case 'close': // If the tag is "close" then it is an array which is closing and we decrease the stack pointer.
					$oldCurrent = $current;
					$current = $stack[--$stacktop];
					end($current); // Going to the end of array to get placeholder key, key($current), and fill in array next:
					$current[key($current)] = $oldCurrent;
					unset($oldCurrent);
					break;
				case 'complete': // If "complete", then it's a value. If the attribute "base64" is set, then decode the value, otherwise just set it.
					if ($val['attributes']['base64']) {
						$current[$tagName] = base64_decode($val['value']);
					} else {
						$current[$tagName] = (string) $val['value']; // Had to cast it as a string - otherwise it would be evaluate false if tested with isset()!!

							// Cast type:
						switch ((string) $val['attributes']['type']) {
							case 'integer':
								$current[$tagName] = (integer) $current[$tagName];
								break;
							case 'double':
								$current[$tagName] = (double) $current[$tagName];
								break;
							case 'boolean':
								$current[$tagName] = (bool) $current[$tagName];
								break;
							case 'array':
								$current[$tagName] = array(); // MUST be an empty array since it is processed as a value; Empty arrays would end up here because they would have no tags inside...
								break;
						}
					}
					break;
			}
		}

		if ($reportDocTag) {
			$current[$tagName]['_DOCUMENT_TAG'] = $documentTag;
		}

			// Finally return the content of the document tag.
		return $current[$tagName];
	}

	/**
	 * This implodes an array of XML parts (made with xml_parse_into_struct()) into XML again.
	 * Usage: 2
	 *
	 * @param	array		A array of XML parts, see xml2tree
	 * @return	string		Re-compiled XML data.
	 */
	public static function xmlRecompileFromStructValArray(array $vals) {
		$XMLcontent = '';

		foreach ($vals as $val) {
			$type = $val['type'];

				// open tag:
			if ($type == 'open' || $type == 'complete') {
				$XMLcontent .= '<' . $val['tag'];
				if (isset($val['attributes'])) {
					foreach ($val['attributes'] as $k => $v) {
						$XMLcontent .= ' ' . $k . '="' . htmlspecialchars($v) . '"';
					}
				}
				if ($type == 'complete') {
					if (isset($val['value'])) {
						$XMLcontent .= '>' . htmlspecialchars($val['value']) . '</' . $val['tag'] . '>';
					} else {
						$XMLcontent .= '/>';
					}
				} else {
					$XMLcontent .= '>';
				}

				if ($type == 'open' && isset($val['value'])) {
					$XMLcontent .= htmlspecialchars($val['value']);
				}
			}
				// finish tag:
			if ($type == 'close') {
				$XMLcontent .= '</' . $val['tag'] . '>';
			}
				// cdata
			if ($type == 'cdata') {
				$XMLcontent .= htmlspecialchars($val['value']);
			}
		}

		return $XMLcontent;
	}

	/**
	 * Extracts the attributes (typically encoding and version) of an XML prologue (header).
	 * Usage: 1
	 *
	 * @param	string		XML data
	 * @return	array		Attributes of the xml prologue (header)
	 */
	public static function xmlGetHeaderAttribs($xmlData) {
		$match = array();
		if (preg_match('/^\s*<\?xml([^>]*)\?\>/', $xmlData, $match)) {
			return self::get_tag_attributes($match[1]);
		}
	}

	/**
	 * Minifies JavaScript
	 *
	 * @param	string	$script	Script to minify
	 * @param	string	$error	Error message (if any)
	 * @return	string	Minified script or source string if error happened
	 */
	public static function minifyJavaScript($script, &$error = '') {
		require_once(PATH_typo3 . 'contrib/jsmin/jsmin.php');
		try {
			$error = '';
			$script = trim(JSMin::minify(str_replace(CR, '', $script)));
		}
		catch (JSMinException $e) {
			$error = 'Error while minifying JavaScript: ' . $e->getMessage();
			self::devLog($error, 't3lib_div', 2,
				array('JavaScript' => $script, 'Stack trace' => $e->getTrace()));
		}
		return $script;
	}


	/*************************
	 *
	 * FILES FUNCTIONS
	 *
	 *************************/

	/**
	 * Reads the file or url $url and returns the content
	 * If you are having trouble with proxys when reading URLs you can configure your way out of that with settings like $TYPO3_CONF_VARS['SYS']['curlUse'] etc.
	 * Usage: 83
	 *
	 * @param	string		File/URL to read
	 * @param	integer		Whether the HTTP header should be fetched or not. 0=disable, 1=fetch header+content, 2=fetch header only
	 * @param	array			HTTP headers to be used in the request
	 * @param	array			Error code/message and, if $includeHeader is 1, response meta data (HTTP status and content type)
	 * @return	string	The content from the resource given as input. FALSE if an error has occured.
	 */
	public static function getUrl($url, $includeHeader = 0, $requestHeaders = FALSE, &$report = NULL) {
		$content = FALSE;

		if (isset($report)) {
			$report['error'] = 0;
			$report['message'] = '';
		}

			// use cURL for: http, https, ftp, ftps, sftp and scp
		if ($GLOBALS['TYPO3_CONF_VARS']['SYS']['curlUse'] == '1' && preg_match('/^(?:http|ftp)s?|s(?:ftp|cp):/', $url)) {
			if (isset($report)) {
				$report['lib'] = 'cURL';
			}

				// External URL without error checking.
			$ch = curl_init();
			if (!$ch) {
				if (isset($report)) {
					$report['error'] = -1;
					$report['message'] = 'Couldn\'t initialize cURL.';
				}
				return FALSE;
			}

			curl_setopt($ch, CURLOPT_URL, $url);
			curl_setopt($ch, CURLOPT_HEADER, $includeHeader ? 1 : 0);
			curl_setopt($ch, CURLOPT_NOBODY, $includeHeader == 2 ? 1 : 0);
			curl_setopt($ch, CURLOPT_HTTPGET, $includeHeader == 2 ? 'HEAD' : 'GET');
			curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1);
			curl_setopt($ch, CURLOPT_FAILONERROR, 1);
			curl_setopt($ch, CURLOPT_CONNECTTIMEOUT, max(0, intval($GLOBALS['TYPO3_CONF_VARS']['SYS']['curlTimeout'])));

				// may fail (PHP 5.2.0+ and 5.1.5+) when open_basedir or safe_mode are enabled
			$followLocation = @curl_setopt($ch, CURLOPT_FOLLOWLOCATION, 1);

			if (is_array($requestHeaders)) {
				curl_setopt($ch, CURLOPT_HTTPHEADER, $requestHeaders);
			}

				// (Proxy support implemented by Arco <arco@appeltaart.mine.nu>)
			if ($GLOBALS['TYPO3_CONF_VARS']['SYS']['curlProxyServer']) {
				curl_setopt($ch, CURLOPT_PROXY, $GLOBALS['TYPO3_CONF_VARS']['SYS']['curlProxyServer']);

				if ($GLOBALS['TYPO3_CONF_VARS']['SYS']['curlProxyTunnel']) {
					curl_setopt($ch, CURLOPT_HTTPPROXYTUNNEL, $GLOBALS['TYPO3_CONF_VARS']['SYS']['curlProxyTunnel']);
				}
				if ($GLOBALS['TYPO3_CONF_VARS']['SYS']['curlProxyUserPass']) {
					curl_setopt($ch, CURLOPT_PROXYUSERPWD, $GLOBALS['TYPO3_CONF_VARS']['SYS']['curlProxyUserPass']);
				}
			}
			$content = curl_exec($ch);
			if (isset($report)) {
				if ($content === FALSE) {
					$report['error'] = curl_errno($ch);
					$report['message'] = curl_error($ch);
				} else {
					$curlInfo = curl_getinfo($ch);
						// We hit a redirection but we couldn't follow it
					if (!$followLocation && $curlInfo['status'] >= 300 && $curlInfo['status'] < 400) {
						$report['error'] = -1;
						$report['message'] = 'Couldn\'t follow location redirect (either PHP configuration option safe_mode or open_basedir is in effect).';
					} elseif ($includeHeader) {
							// Set only for $includeHeader to work exactly like PHP variant
						$report['http_code'] = $curlInfo['http_code'];
						$report['content_type'] = $curlInfo['content_type'];
					}
				}
			}
			curl_close($ch);

		} elseif ($includeHeader) {
			if (isset($report)) {
				$report['lib'] = 'socket';
			}
			$parsedURL = parse_url($url);
			if (!preg_match('/^https?/', $parsedURL['scheme'])) {
				if (isset($report)) {
					$report['error'] = -1;
					$report['message'] = 'Reading headers is not allowed for this protocol.';
				}
				return FALSE;
			}
			$port = intval($parsedURL['port']);
			if ($port < 1) {
				if ($parsedURL['scheme'] == 'http') {
					$port = ($port > 0 ? $port : 80);
					$scheme = '';
				} else {
					$port = ($port > 0 ? $port : 443);
					$scheme = 'ssl://';
				}
			}
			$errno = 0;
				// $errstr = '';
			$fp = @fsockopen($scheme . $parsedURL['host'], $port, $errno, $errstr, 2.0);
			if (!$fp || $errno > 0) {
				if (isset($report)) {
					$report['error'] = $errno ? $errno : -1;
					$report['message'] = $errno ? ($errstr ? $errstr : 'Socket error.') : 'Socket initialization error.';
				}
				return FALSE;
			}
			$method = ($includeHeader == 2) ? 'HEAD' : 'GET';
			$msg = $method . ' ' . (isset($parsedURL['path']) ? $parsedURL['path'] : '/') .
					($parsedURL['query'] ? '?' . $parsedURL['query'] : '') .
					' HTTP/1.0' . CRLF . 'Host: ' .
					$parsedURL['host'] . "\r\nConnection: close\r\n";
			if (is_array($requestHeaders)) {
				$msg .= implode(CRLF, $requestHeaders) . CRLF;
			}
			$msg .= CRLF;

			fputs($fp, $msg);
			while (!feof($fp)) {
				$line = fgets($fp, 2048);
				if (isset($report)) {
					if (preg_match('|^HTTP/\d\.\d +(\d+)|', $line, $status)) {
						$report['http_code'] = $status[1];
					}
					elseif (preg_match('/^Content-Type: *(.*)/i', $line, $type)) {
						$report['content_type'] = $type[1];
					}
				}
				$content .= $line;
				if (!strlen(trim($line))) {
					break; // Stop at the first empty line (= end of header)
				}
			}
			if ($includeHeader != 2) {
				$content .= stream_get_contents($fp);
			}
			fclose($fp);

		} elseif (is_array($requestHeaders)) {
			if (isset($report)) {
				$report['lib'] = 'file/context';
			}
			$parsedURL = parse_url($url);
			if (!preg_match('/^https?/', $parsedURL['scheme'])) {
				if (isset($report)) {
					$report['error'] = -1;
					$report['message'] = 'Sending request headers is not allowed for this protocol.';
				}
				return FALSE;
			}
			$ctx = stream_context_create(array(
				'http' => array(
					'header' => implode(CRLF, $requestHeaders)
				)
			)
			);
			$content = @file_get_contents($url, FALSE, $ctx);
			if ($content === FALSE && isset($report)) {
				$phpError = error_get_last();
				$report['error'] = $phpError['type'];
				$report['message'] = $phpError['message'];
			}
		} else {
			if (isset($report)) {
				$report['lib'] = 'file';
			}
			$content = @file_get_contents($url);
			if ($content === FALSE && isset($report)) {
				if (function_exists('error_get_last')) {
					$phpError = error_get_last();
					$report['error'] = $phpError['type'];
					$report['message'] = $phpError['message'];
				} else {
					$report['error'] = -1;
					$report['message'] = 'Couldn\'t get URL.';
				}
			}
		}

		return $content;
	}

	/**
	 * Writes $content to the file $file
	 * Usage: 30
	 *
	 * @param	string		Filepath to write to
	 * @param	string		Content to write
	 * @return	boolean		True if the file was successfully opened and written to.
	 */
	public static function writeFile($file, $content) {
		if (!@is_file($file)) {
			$changePermissions = TRUE;
		}

		if ($fd = fopen($file, 'wb')) {
			$res = fwrite($fd, $content);
			fclose($fd);

			if ($res === FALSE) {
				return FALSE;
			}

			if ($changePermissions) { // Change the permissions only if the file has just been created
				self::fixPermissions($file);
			}

			return TRUE;
		}

		return FALSE;
	}

	/**
	 * Sets the file system mode and group ownership of a file or a folder.
	 *
	 * @param   string   Path of file or folder, must not be escaped. Path can be absolute or relative
	 * @param   boolean  If set, also fixes permissions of files and folders in the folder (if $path is a folder)
	 * @return  mixed	TRUE on success, FALSE on error, always TRUE on Windows OS
	 */
	public static function fixPermissions($path, $recursive = FALSE) {
		if (TYPO3_OS != 'WIN') {
			$result = FALSE;

				// Make path absolute
			if (!self::isAbsPath($path)) {
				$path = self::getFileAbsFileName($path, FALSE);
			}

			if (self::isAllowedAbsPath($path)) {
				if (@is_file($path)) {
						// "@" is there because file is not necessarily OWNED by the user
					$result = @chmod($path, octdec($GLOBALS['TYPO3_CONF_VARS']['BE']['fileCreateMask']));
				} elseif (@is_dir($path)) {
					$path = preg_replace('|/$|', '', $path);
						// "@" is there because file is not necessarily OWNED by the user
					$result = @chmod($path, octdec($GLOBALS['TYPO3_CONF_VARS']['BE']['folderCreateMask']));
				}

					// Set createGroup if not empty
				if ($GLOBALS['TYPO3_CONF_VARS']['BE']['createGroup']) {
						// "@" is there because file is not necessarily OWNED by the user
					$changeGroupResult = @chgrp($path, $GLOBALS['TYPO3_CONF_VARS']['BE']['createGroup']);
					$result = $changeGroupResult ? $result : FALSE;
				}

					// Call recursive if recursive flag if set and $path is directory
				if ($recursive && @is_dir($path)) {
					$handle = opendir($path);
					while (($file = readdir($handle)) !== FALSE) {
						$recursionResult = NULL;
						if ($file !== '.' && $file !== '..') {
							if (@is_file($path . '/' . $file)) {
								$recursionResult = self::fixPermissions($path . '/' . $file);
							} elseif (@is_dir($path . '/' . $file)) {
								$recursionResult = self::fixPermissions($path . '/' . $file, TRUE);
							}
							if (isset($recursionResult) && !$recursionResult) {
								$result = FALSE;
							}
						}
					}
					closedir($handle);
				}
			}
		} else {
			$result = TRUE;
		}
		return $result;
	}

	/**
	 * Writes $content to a filename in the typo3temp/ folder (and possibly one or two subfolders...)
	 * Accepts an additional subdirectory in the file path!
	 *
	 * @param	string		Absolute filepath to write to inside "typo3temp/". First part of this string must match PATH_site."typo3temp/"
	 * @param	string		Content string to write
	 * @return	string		Returns NULL on success, otherwise an error string telling about the problem.
	 */
	public static function writeFileToTypo3tempDir($filepath, $content) {

			// Parse filepath into directory and basename:
		$fI = pathinfo($filepath);
		$fI['dirname'] .= '/';

			// Check parts:
		if (self::validPathStr($filepath) && $fI['basename'] && strlen($fI['basename']) < 60) {
			if (defined('PATH_site')) {
				$dirName = PATH_site . 'typo3temp/'; // Setting main temporary directory name (standard)
				if (@is_dir($dirName)) {
					if (self::isFirstPartOfStr($fI['dirname'], $dirName)) {

							// Checking if the "subdir" is found:
						$subdir = substr($fI['dirname'], strlen($dirName));
						if ($subdir) {
							if (preg_match('/^[[:alnum:]_]+\/$/', $subdir) || preg_match('/^[[:alnum:]_]+\/[[:alnum:]_]+\/$/', $subdir)) {
								$dirName .= $subdir;
								if (!@is_dir($dirName)) {
									self::mkdir_deep(PATH_site . 'typo3temp/', $subdir);
								}
							} else {
								return 'Subdir, "' . $subdir . '", was NOT on the form "[[:alnum:]_]/" or  "[[:alnum:]_]/[[:alnum:]_]/"';
							}
						}
							// Checking dir-name again (sub-dir might have been created):
						if (@is_dir($dirName)) {
							if ($filepath == $dirName . $fI['basename']) {
								self::writeFile($filepath, $content);
								if (!@is_file($filepath)) {
									return 'File not written to disk! Write permission error in filesystem?';
								}
							} else {
								return 'Calculated filelocation didn\'t match input $filepath!';
							}
						} else {
							return '"' . $dirName . '" is not a directory!';
						}
					} else {
						return '"' . $fI['dirname'] . '" was not within directory PATH_site + "typo3temp/"';
					}
				} else {
					return 'PATH_site + "typo3temp/" was not a directory!';
				}
			} else {
				return 'PATH_site constant was NOT defined!';
			}
		} else {
			return 'Input filepath "' . $filepath . '" was generally invalid!';
		}
	}

	/**
	 * Wrapper function for mkdir.
	 * Sets folder permissions according to $GLOBALS['TYPO3_CONF_VARS']['BE']['folderCreateMask']
	 * and group ownership according to $GLOBALS['TYPO3_CONF_VARS']['BE']['createGroup']
	 *
	 * @param	string		Absolute path to folder, see PHP mkdir() function. Removes trailing slash internally.
	 * @return	boolean		TRUE if @mkdir went well!
	 */
	public static function mkdir($newFolder) {
		$newFolder = preg_replace('|/$|', '', $newFolder);
		$result = @mkdir($newFolder, octdec($GLOBALS['TYPO3_CONF_VARS']['BE']['folderCreateMask']));
		if ($result) {
			self::fixPermissions($newFolder);
		}
		return $result;
	}

	/**
	 * Creates a directory - including parent directories if necessary - in the file system
	 *
	 * @param	string		Base folder. This must exist! Must have trailing slash! Example "/root/typo3site/"
	 * @param	string		Deep directory to create, eg. "xx/yy/" which creates "/root/typo3site/xx/yy/" if $destination is "/root/typo3site/"
	 * @return	string		If error, returns error string.
	 */
	public static function mkdir_deep($destination, $deepDir) {
		$allParts = self::trimExplode('/', $deepDir, 1);
		$root = '';
		foreach ($allParts as $part) {
			$root .= $part . '/';
			if (!is_dir($destination . $root)) {
				self::mkdir($destination . $root);
				if (!@is_dir($destination . $root)) {
					return 'Error: The directory "' . $destination . $root . '" could not be created...';
				}
			}
		}
	}

	/**
	 * Wrapper function for rmdir, allowing recursive deletion of folders and files
	 *
	 * @param	string		Absolute path to folder, see PHP rmdir() function. Removes trailing slash internally.
	 * @param	boolean		Allow deletion of non-empty directories
	 * @return	boolean		true if @rmdir went well!
	 */
	public static function rmdir($path, $removeNonEmpty = FALSE) {
		$OK = FALSE;
		$path = preg_replace('|/$|', '', $path); // Remove trailing slash

		if (file_exists($path)) {
			$OK = TRUE;

			if (is_dir($path)) {
				if ($removeNonEmpty == TRUE && $handle = opendir($path)) {
					while ($OK && FALSE !== ($file = readdir($handle))) {
						if ($file == '.' || $file == '..') {
							continue;
						}
						$OK = self::rmdir($path . '/' . $file, $removeNonEmpty);
					}
					closedir($handle);
				}
				if ($OK) {
					$OK = rmdir($path);
				}

			} else { // If $dirname is a file, simply remove it
				$OK = unlink($path);
			}

			clearstatcache();
		}

		return $OK;
	}

	/**
	 * Returns an array with the names of folders in a specific path
	 * Will return 'error' (string) if there were an error with reading directory content.
	 * Usage: 11
	 *
	 * @param	string		Path to list directories from
	 * @return	array		Returns an array with the directory entries as values. If no path, the return value is nothing.
	 */
	public static function get_dirs($path) {
		if ($path) {
			if (is_dir($path)) {
				$dir = scandir($path);
				$dirs = array();
				foreach ($dir as $entry) {
					if (is_dir($path . '/' . $entry) && $entry != '..' && $entry != '.') {
						$dirs[] = $entry;
					}
				}
			} else {
				$dirs = 'error';
			}
		}
		return $dirs;
	}

	/**
	 * Returns an array with the names of files in a specific path
	 * Usage: 18
	 *
	 * @param	string		$path: Is the path to the file
	 * @param	string		$extensionList is the comma list of extensions to read only (blank = all)
	 * @param	boolean		If set, then the path is prepended the filenames. Otherwise only the filenames are returned in the array
	 * @param	string		$order is sorting: 1= sort alphabetically, 'mtime' = sort by modification time.
	 * @param	string		A comma seperated list of filenames to exclude, no wildcards
	 * @return	array		Array of the files found
	 */
	public static function getFilesInDir($path, $extensionList = '', $prependPath = 0, $order = '', $excludePattern = '') {

			// Initialize variabels:
		$filearray = array();
		$sortarray = array();
		$path = rtrim($path, '/');

			// Find files+directories:
		if (@is_dir($path)) {
			$extensionList = strtolower($extensionList);
			$d = dir($path);
			if (is_object($d)) {
				while ($entry = $d->read()) {
					if (@is_file($path . '/' . $entry)) {
						$fI = pathinfo($entry);
						$key = md5($path . '/' . $entry); // Don't change this ever - extensions may depend on the fact that the hash is an md5 of the path! (import/export extension)
						if ((!strlen($extensionList) || self::inList($extensionList, strtolower($fI['extension']))) && (!strlen($excludePattern) || !preg_match('/^' . $excludePattern . '$/', $entry))) {
							$filearray[$key] = ($prependPath ? $path . '/' : '') . $entry;
							if ($order == 'mtime') {
								$sortarray[$key] = filemtime($path . '/' . $entry);
							}
							elseif ($order) {
								$sortarray[$key] = $entry;
							}
						}
					}
				}
				$d->close();
			} else {
				return 'error opening path: "' . $path . '"';
			}
		}

			// Sort them:
		if ($order) {
			asort($sortarray);
			$newArr = array();
			foreach ($sortarray as $k => $v) {
				$newArr[$k] = $filearray[$k];
			}
			$filearray = $newArr;
		}

			// Return result
		reset($filearray);
		return $filearray;
	}

	/**
	 * Recursively gather all files and folders of a path.
	 * Usage: 5
	 *
	 * @param	array		$fileArr: Empty input array (will have files added to it)
	 * @param	string		$path: The path to read recursively from (absolute) (include trailing slash!)
	 * @param	string		$extList: Comma list of file extensions: Only files with extensions in this list (if applicable) will be selected.
	 * @param	boolean		$regDirs: If set, directories are also included in output.
	 * @param	integer		$recursivityLevels: The number of levels to dig down...
	 * @param string		$excludePattern: regex pattern of files/directories to exclude
	 * @return	array		An array with the found files/directories.
	 */
	public static function getAllFilesAndFoldersInPath(array $fileArr, $path, $extList = '', $regDirs = 0, $recursivityLevels = 99, $excludePattern = '') {
		if ($regDirs) {
			$fileArr[] = $path;
		}
		$fileArr = array_merge($fileArr, self::getFilesInDir($path, $extList, 1, 1, $excludePattern));

		$dirs = self::get_dirs($path);
		if (is_array($dirs) && $recursivityLevels > 0) {
			foreach ($dirs as $subdirs) {
				if ((string) $subdirs != '' && (!strlen($excludePattern) || !preg_match('/^' . $excludePattern . '$/', $subdirs))) {
					$fileArr = self::getAllFilesAndFoldersInPath($fileArr, $path . $subdirs . '/', $extList, $regDirs, $recursivityLevels - 1, $excludePattern);
				}
			}
		}
		return $fileArr;
	}

	/**
	 * Removes the absolute part of all files/folders in fileArr
	 * Usage: 2
	 *
	 * @param	array		$fileArr: The file array to remove the prefix from
	 * @param	string		$prefixToRemove: The prefix path to remove (if found as first part of string!)
	 * @return	array		The input $fileArr processed.
	 */
	public static function removePrefixPathFromList(array $fileArr, $prefixToRemove) {
		foreach ($fileArr as $k => &$absFileRef) {
			if (self::isFirstPartOfStr($absFileRef, $prefixToRemove)) {
				$absFileRef = substr($absFileRef, strlen($prefixToRemove));
			} else {
				return 'ERROR: One or more of the files was NOT prefixed with the prefix-path!';
			}
		}
		return $fileArr;
	}

	/**
	 * Fixes a path for windows-backslashes and reduces double-slashes to single slashes
	 * Usage: 2
	 *
	 * @param	string		File path to process
	 * @return	string
	 */
	public static function fixWindowsFilePath($theFile) {
		return str_replace('//', '/', str_replace('\\', '/', $theFile));
	}

	/**
	 * Resolves "../" sections in the input path string.
	 * For example "fileadmin/directory/../other_directory/" will be resolved to "fileadmin/other_directory/"
	 * Usage: 2
	 *
	 * @param	string		File path in which "/../" is resolved
	 * @return	string
	 */
	public static function resolveBackPath($pathStr) {
		$parts = explode('/', $pathStr);
		$output = array();
		$c = 0;
		foreach ($parts as $pV) {
			if ($pV == '..') {
				if ($c) {
					array_pop($output);
					$c--;
				} else {
					$output[] = $pV;
				}
			} else {
				$c++;
				$output[] = $pV;
			}
		}
		return implode('/', $output);
	}

	/**
	 * Prefixes a URL used with 'header-location' with 'http://...' depending on whether it has it already.
	 * - If already having a scheme, nothing is prepended
	 * - If having REQUEST_URI slash '/', then prefixing 'http://[host]' (relative to host)
	 * - Otherwise prefixed with TYPO3_REQUEST_DIR (relative to current dir / TYPO3_REQUEST_DIR)
	 * Usage: 30
	 *
	 * @param	string		URL / path to prepend full URL addressing to.
	 * @return	string
	 */
	public static function locationHeaderUrl($path) {
		$uI = parse_url($path);
		if (substr($path, 0, 1) == '/') { // relative to HOST
			$path = self::getIndpEnv('TYPO3_REQUEST_HOST') . $path;
		} elseif (!$uI['scheme']) { // No scheme either
			$path = self::getIndpEnv('TYPO3_REQUEST_DIR') . $path;
		}
		return $path;
	}

	/**
	 * Returns the maximum upload size for a file that is allowed. Measured in KB.
	 * This might be handy to find out the real upload limit that is possible for this
	 * TYPO3 installation. The first parameter can be used to set something that overrides
	 * the maxFileSize, usually for the TCA values.
	 *
	 * @param	integer		$localLimit: the number of Kilobytes (!) that should be used as
	 *						the initial Limit, otherwise $TYPO3_CONF_VARS['BE']['maxFileSize'] will be used
	 * @return	integer		the maximum size of uploads that are allowed (measuered in kilobytes)
	 */
	public static function getMaxUploadFileSize($localLimit = 0) {
			// don't allow more than the global max file size at all
		$t3Limit = (intval($localLimit > 0 ? $localLimit : $GLOBALS['TYPO3_CONF_VARS']['BE']['maxFileSize']));
			// as TYPO3 is handling the file size in KB, multiply by 1024 to get bytes
		$t3Limit = $t3Limit * 1024;

			// check for PHP restrictions of the maximum size of one of the $_FILES
		$phpUploadLimit = self::getBytesFromSizeMeasurement(ini_get('upload_max_filesize'));
			// check for PHP restrictions of the maximum $_POST size
		$phpPostLimit = self::getBytesFromSizeMeasurement(ini_get('post_max_size'));
			// if the total amount of post data is smaller (!) than the upload_max_filesize directive,
			// then this is the real limit in PHP
		$phpUploadLimit = ($phpPostLimit < $phpUploadLimit ? $phpPostLimit : $phpUploadLimit);

			// is the allowed PHP limit (upload_max_filesize) lower than the TYPO3 limit?, also: revert back to KB
		return floor($phpUploadLimit < $t3Limit ? $phpUploadLimit : $t3Limit) / 1024;
	}

	/**
	 * Gets the bytes value from a measurement string like "100k".
	 *
	 * @param	string		$measurement: The measurement (e.g. "100k")
	 * @return	integer		The bytes value (e.g. 102400)
	 */
	public static function getBytesFromSizeMeasurement($measurement) {
		if (stripos($measurement, 'G')) {
			$bytes = doubleval($measurement) * 1024 * 1024 * 1024;
		} else {
			if (stripos($measurement, 'M')) {
				$bytes = doubleval($measurement) * 1024 * 1024;
			} else {
				if (stripos($measurement, 'K')) {
					$bytes = doubleval($measurement) * 1024;
				} else {
					$bytes = doubleval($measurement);
				}
			}
		}
		return $bytes;
	}

	/**
	 * Retrieves the maximum path length that is valid in the current environment.
	 *
	 * @return integer The maximum available path length
	 * @author Ingo Renner <ingo@typo3.org>
	 */
	public static function getMaximumPathLength() {
		$maximumPathLength = 0;

		if (version_compare(PHP_VERSION, '5.3.0', '<')) {
				// rough assumptions
			if (TYPO3_OS == 'WIN') {
					// WIN is usually 255, Vista 260, although NTFS can hold about 2k
				$maximumPathLength = 255;
			} else {
				$maximumPathLength = 2048;
			}
		} else {
				// precise information is available since PHP 5.3
			$maximumPathLength = PHP_MAXPATHLEN;
		}

		return $maximumPathLength;
	}


	/**
	 * Function for static version numbers on files, based on the filemtime
	 *
	 * This will make the filename automatically change when a file is
	 * changed, and by that re-cached by the browser. If the file does not
	 * exist physically the original file passed to the function is
	 * returned without the timestamp.
	 *
	 * Behaviour is influenced by the setting
	 * TYPO3_CONF_VARS[TYPO3_MODE][versionNumberInFilename]
	 * = true (BE) / "embed" (FE) : modify filename
	 * = false (BE) / "querystring" (FE) : add timestamp as parameter
	 *
	 * @param string $file Relative path to file including all potential query parameters (not htmlspecialchared yet)
	 * @param boolean $forceQueryString If settings would suggest to embed in filename, this parameter allows us to force the versioning to occur in the query string. This is needed for scriptaculous.js which cannot have a different filename in order to load its modules (?load=...)
	 * @return Relative path with version filename including the timestamp
	 * @author Lars Houmark <lars@houmark.com>
	 */
	public static function createVersionNumberedFilename($file, $forceQueryString = FALSE) {
		$lookupFile = explode('?', $file);
		$path = self::resolveBackPath(self::dirname(PATH_thisScript) . '/' . $lookupFile[0]);

		if (TYPO3_MODE == 'FE') {
			$mode = strtolower($GLOBALS['TYPO3_CONF_VARS'][TYPO3_MODE]['versionNumberInFilename']);
			if ($mode === 'embed') {
				$mode = TRUE;
			} else {
				if ($mode === 'querystring') {
					$mode = FALSE;
				} else {
					$doNothing = TRUE;
				}
			}
		} else {
			$mode = $GLOBALS['TYPO3_CONF_VARS'][TYPO3_MODE]['versionNumberInFilename'];
		}

		if (!file_exists($path) || $doNothing) {
				// File not found, return filename unaltered
			$fullName = $file;

		} else {
			if (!$mode || $forceQueryString) {
					// If use of .htaccess rule is not configured,
					// we use the default query-string method
				if ($lookupFile[1]) {
					$separator = '&';
				} else {
					$separator = '?';
				}
				$fullName = $file . $separator . filemtime($path);

			} else {
					// Change the filename
				$name = explode('.', $lookupFile[0]);
				$extension = array_pop($name);

				array_push($name, filemtime($path), $extension);
				$fullName = implode('.', $name);
					// append potential query string
				$fullName .= $lookupFile[1] ? '?' . $lookupFile[1] : '';
			}
		}

		return $fullName;
	}


	/*************************
	 *
	 * DEBUG helper FUNCTIONS
	 *
	 *************************/

	/* Deprecated since 4.5, use t3lib_utility_Debug */


	/**
	 * Returns a string with a list of ascii-values for the first $characters characters in $string
	 * Usage: 0
	 *
	 * @param	string		String to show ASCII value for
	 * @param	integer		Number of characters to show
	 * @return	string		The string with ASCII values in separated by a space char.
	 * @deprecated since TYPO3 4.5 - Use t3lib_utility_Debug::ordinalValue instead
	 */
	public static function debug_ordvalue($string, $characters = 100) {
		self::logDeprecatedFunction();
		return t3lib_utility_Debug::ordinalValue($string, $characters);
	}

	/**
	 * Returns HTML-code, which is a visual representation of a multidimensional array
	 * use t3lib_div::print_array() in order to print an array
	 * Returns false if $array_in is not an array
	 * Usage: 31
	 *
	 * @param	mixed		Array to view
	 * @return	string		HTML output
	 * @deprecated since TYPO3 4.5 - Use t3lib_utility_Debug::viewArray instead
	 */
	public static function view_array($array_in) {
		self::logDeprecatedFunction();
		return t3lib_utility_Debug::viewArray($array_in);
	}

	/**
	 * Prints an array
	 * Usage: 6
	 *
	 * @param	mixed		Array to print visually (in a table).
	 * @return	void
	 * @see view_array()
	 * @deprecated since TYPO3 4.5 - Use t3lib_utility_Debug::printArray instead
	 */
	public static function print_array($array_in) {
		self::logDeprecatedFunction();
		t3lib_utility_Debug::printArray($array_in);
	}

	/**
	 * Makes debug output
	 * Prints $var in bold between two vertical lines
	 * If not $var the word 'debug' is printed
	 * If $var is an array, the array is printed by t3lib_div::print_array()
	 * Usage: 8
	 *
	 * @param	mixed		Variable to print
	 * @param	string		The header.
	 * @param	string		Group for the debug console
	 * @return	void
	 * @deprecated since TYPO3 4.5 - Use t3lib_utility_Debug::debug instead
	 */
	public static function debug($var = '', $header = '', $group = 'Debug') {
		self::logDeprecatedFunction();
		t3lib_utility_Debug::debug($var, $header, $group);
	}

	/**
	 * Displays the "path" of the function call stack in a string, using debug_backtrace
	 *
	 * @return	string
	 * @deprecated since TYPO3 4.5 - Use t3lib_utility_Debug::debugTrail instead
	 */
	public static function debug_trail() {
		self::logDeprecatedFunction();
		return t3lib_utility_Debug::debugTrail();
	}

	/**
	 * Displays an array as rows in a table. Useful to debug output like an array of database records.
	 *
	 * @param	mixed		Array of arrays with similar keys
	 * @param	string		Table header
	 * @param	boolean		If TRUE, will return content instead of echo'ing out.
	 * @return	void		Outputs to browser.
	 * @deprecated since TYPO3 4.5 - Use t3lib_utility_Debug::debugRows instead
	 */
	public static function debugRows($rows, $header = '', $returnHTML = FALSE) {
		self::logDeprecatedFunction();
		return t3lib_utility_Debug::debugRows($rows, $header, $returnHTML);
	}


	/*************************
	 *
	 * SYSTEM INFORMATION
	 *
	 *************************/

	/**
	 * Returns the HOST+DIR-PATH of the current script (The URL, but without 'http://' and without script-filename)
	 * Usage: 1
	 *
	 * @return	string
	 */
	public static function getThisUrl() {
		$p = parse_url(self::getIndpEnv('TYPO3_REQUEST_SCRIPT')); // Url of this script
		$dir = self::dirname($p['path']) . '/'; // Strip file
		$url = str_replace('//', '/', $p['host'] . ($p['port'] ? ':' . $p['port'] : '') . $dir);
		return $url;
	}

	/**
	 * Returns the link-url to the current script.
	 * In $getParams you can set associative keys corresponding to the GET-vars you wish to add to the URL. If you set them empty, they will remove existing GET-vars from the current URL.
	 * REMEMBER to always use htmlspecialchars() for content in href-properties to get ampersands converted to entities (XHTML requirement and XSS precaution)
	 * Usage: 52
	 *
	 * @param	array		Array of GET parameters to include
	 * @return	string
	 */
	public static function linkThisScript(array $getParams = array()) {
		$parts = self::getIndpEnv('SCRIPT_NAME');
		$params = self::_GET();

		foreach ($getParams as $key => $value) {
			if ($value !== '') {
				$params[$key] = $value;
			} else {
				unset($params[$key]);
			}
		}

		$pString = self::implodeArrayForUrl('', $params);

		return $pString ? $parts . '?' . preg_replace('/^&/', '', $pString) : $parts;
	}

	/**
	 * Takes a full URL, $url, possibly with a querystring and overlays the $getParams arrays values onto the quirystring, packs it all together and returns the URL again.
	 * So basically it adds the parameters in $getParams to an existing URL, $url
	 * Usage: 2
	 *
	 * @param	string		URL string
	 * @param	array		Array of key/value pairs for get parameters to add/overrule with. Can be multidimensional.
	 * @return	string		Output URL with added getParams.
	 */
	public static function linkThisUrl($url, array $getParams = array()) {
		$parts = parse_url($url);
		$getP = array();
		if ($parts['query']) {
			parse_str($parts['query'], $getP);
		}
		$getP = self::array_merge_recursive_overrule($getP, $getParams);
		$uP = explode('?', $url);

		$params = self::implodeArrayForUrl('', $getP);
		$outurl = $uP[0] . ($params ? '?' . substr($params, 1) : '');

		return $outurl;
	}

	/**
	 * Abstraction method which returns System Environment Variables regardless of server OS, CGI/MODULE version etc. Basically this is SERVER variables for most of them.
	 * This should be used instead of getEnv() and $_SERVER/ENV_VARS to get reliable values for all situations.
	 * Usage: 221
	 *
	 * @param	string		Name of the "environment variable"/"server variable" you wish to use. Valid values are SCRIPT_NAME, SCRIPT_FILENAME, REQUEST_URI, PATH_INFO, REMOTE_ADDR, REMOTE_HOST, HTTP_REFERER, HTTP_HOST, HTTP_USER_AGENT, HTTP_ACCEPT_LANGUAGE, QUERY_STRING, TYPO3_DOCUMENT_ROOT, TYPO3_HOST_ONLY, TYPO3_HOST_ONLY, TYPO3_REQUEST_HOST, TYPO3_REQUEST_URL, TYPO3_REQUEST_SCRIPT, TYPO3_REQUEST_DIR, TYPO3_SITE_URL, _ARRAY
	 * @return	string		Value based on the input key, independent of server/os environment.
	 */
	public static function getIndpEnv($getEnvName) {
		/*
			Conventions:
			output from parse_url():
			URL:	http://username:password@192.168.1.4:8080/typo3/32/temp/phpcheck/index.php/arg1/arg2/arg3/?arg1,arg2,arg3&p1=parameter1&p2[key]=value#link1
				[scheme] => 'http'
				[user] => 'username'
				[pass] => 'password'
				[host] => '192.168.1.4'
				[port] => '8080'
				[path] => '/typo3/32/temp/phpcheck/index.php/arg1/arg2/arg3/'
				[query] => 'arg1,arg2,arg3&p1=parameter1&p2[key]=value'
				[fragment] => 'link1'

				Further definition: [path_script] = '/typo3/32/temp/phpcheck/index.php'
									[path_dir] = '/typo3/32/temp/phpcheck/'
									[path_info] = '/arg1/arg2/arg3/'
									[path] = [path_script/path_dir][path_info]


			Keys supported:

			URI______:
				REQUEST_URI		=	[path]?[query]		= /typo3/32/temp/phpcheck/index.php/arg1/arg2/arg3/?arg1,arg2,arg3&p1=parameter1&p2[key]=value
				HTTP_HOST		=	[host][:[port]]		= 192.168.1.4:8080
				SCRIPT_NAME		=	[path_script]++		= /typo3/32/temp/phpcheck/index.php		// NOTICE THAT SCRIPT_NAME will return the php-script name ALSO. [path_script] may not do that (eg. '/somedir/' may result in SCRIPT_NAME '/somedir/index.php')!
				PATH_INFO		=	[path_info]			= /arg1/arg2/arg3/
				QUERY_STRING	=	[query]				= arg1,arg2,arg3&p1=parameter1&p2[key]=value
				HTTP_REFERER	=	[scheme]://[host][:[port]][path]	= http://192.168.1.4:8080/typo3/32/temp/phpcheck/index.php/arg1/arg2/arg3/?arg1,arg2,arg3&p1=parameter1&p2[key]=value
										(Notice: NO username/password + NO fragment)

			CLIENT____:
				REMOTE_ADDR		=	(client IP)
				REMOTE_HOST		=	(client host)
				HTTP_USER_AGENT	=	(client user agent)
				HTTP_ACCEPT_LANGUAGE	= (client accept language)

			SERVER____:
				SCRIPT_FILENAME	=	Absolute filename of script		(Differs between windows/unix). On windows 'C:\\blabla\\blabl\\' will be converted to 'C:/blabla/blabl/'

			Special extras:
				TYPO3_HOST_ONLY =		[host] = 192.168.1.4
				TYPO3_PORT =			[port] = 8080 (blank if 80, taken from host value)
				TYPO3_REQUEST_HOST = 		[scheme]://[host][:[port]]
				TYPO3_REQUEST_URL =		[scheme]://[host][:[port]][path]?[query] (scheme will by default be "http" until we can detect something different)
				TYPO3_REQUEST_SCRIPT =  	[scheme]://[host][:[port]][path_script]
				TYPO3_REQUEST_DIR =		[scheme]://[host][:[port]][path_dir]
				TYPO3_SITE_URL = 		[scheme]://[host][:[port]][path_dir] of the TYPO3 website frontend
				TYPO3_SITE_PATH = 		[path_dir] of the TYPO3 website frontend
				TYPO3_SITE_SCRIPT = 		[script / Speaking URL] of the TYPO3 website
				TYPO3_DOCUMENT_ROOT =		Absolute path of root of documents: TYPO3_DOCUMENT_ROOT.SCRIPT_NAME = SCRIPT_FILENAME (typically)
				TYPO3_SSL = 			Returns TRUE if this session uses SSL/TLS (https)
				TYPO3_PROXY = 			Returns TRUE if this session runs over a well known proxy

			Notice: [fragment] is apparently NEVER available to the script!


			Testing suggestions:
			- Output all the values.
			- In the script, make a link to the script it self, maybe add some parameters and click the link a few times so HTTP_REFERER is seen
			- ALSO TRY the script from the ROOT of a site (like 'http://www.mytest.com/' and not 'http://www.mytest.com/test/' !!)

		*/

		#		if ($getEnvName=='HTTP_REFERER')	return '';

		$retVal = '';

		switch ((string) $getEnvName) {
			case 'SCRIPT_NAME':
				$retVal = (PHP_SAPI == 'fpm-fcgi' || PHP_SAPI == 'cgi' || PHP_SAPI == 'cgi-fcgi') &&
						($_SERVER['ORIG_PATH_INFO'] ? $_SERVER['ORIG_PATH_INFO'] : $_SERVER['PATH_INFO']) ?
						($_SERVER['ORIG_PATH_INFO'] ? $_SERVER['ORIG_PATH_INFO'] : $_SERVER['PATH_INFO']) :
						($_SERVER['ORIG_SCRIPT_NAME'] ? $_SERVER['ORIG_SCRIPT_NAME'] : $_SERVER['SCRIPT_NAME']);
					// add a prefix if TYPO3 is behind a proxy: ext-domain.com => int-server.com/prefix
				if (self::cmpIP($_SERVER['REMOTE_ADDR'], $GLOBALS['TYPO3_CONF_VARS']['SYS']['reverseProxyIP'])) {
					if (self::getIndpEnv('TYPO3_SSL') && $GLOBALS['TYPO3_CONF_VARS']['SYS']['reverseProxyPrefixSSL']) {
						$retVal = $GLOBALS['TYPO3_CONF_VARS']['SYS']['reverseProxyPrefixSSL'] . $retVal;
					} elseif ($GLOBALS['TYPO3_CONF_VARS']['SYS']['reverseProxyPrefix']) {
						$retVal = $GLOBALS['TYPO3_CONF_VARS']['SYS']['reverseProxyPrefix'] . $retVal;
					}
				}
				break;
			case 'SCRIPT_FILENAME':
				$retVal = str_replace('//', '/', str_replace('\\', '/',
					(PHP_SAPI == 'fpm-fcgi' || PHP_SAPI == 'cgi' || PHP_SAPI == 'isapi' || PHP_SAPI == 'cgi-fcgi') &&
							($_SERVER['ORIG_PATH_TRANSLATED'] ? $_SERVER['ORIG_PATH_TRANSLATED'] : $_SERVER['PATH_TRANSLATED']) ?
							($_SERVER['ORIG_PATH_TRANSLATED'] ? $_SERVER['ORIG_PATH_TRANSLATED'] : $_SERVER['PATH_TRANSLATED']) :
							($_SERVER['ORIG_SCRIPT_FILENAME'] ? $_SERVER['ORIG_SCRIPT_FILENAME'] : $_SERVER['SCRIPT_FILENAME'])));

				break;
			case 'REQUEST_URI':
					// Typical application of REQUEST_URI is return urls, forms submitting to itself etc. Example: returnUrl='.rawurlencode(t3lib_div::getIndpEnv('REQUEST_URI'))
				if ($GLOBALS['TYPO3_CONF_VARS']['SYS']['requestURIvar']) { // This is for URL rewriters that store the original URI in a server variable (eg ISAPI_Rewriter for IIS: HTTP_X_REWRITE_URL)
					list($v, $n) = explode('|', $GLOBALS['TYPO3_CONF_VARS']['SYS']['requestURIvar']);
					$retVal = $GLOBALS[$v][$n];
				} elseif (!$_SERVER['REQUEST_URI']) { // This is for ISS/CGI which does not have the REQUEST_URI available.
					$retVal = '/' . ltrim(self::getIndpEnv('SCRIPT_NAME'), '/') .
							($_SERVER['QUERY_STRING'] ? '?' . $_SERVER['QUERY_STRING'] : '');
				} else {
					$retVal = $_SERVER['REQUEST_URI'];
				}
					// add a prefix if TYPO3 is behind a proxy: ext-domain.com => int-server.com/prefix
				if (self::cmpIP($_SERVER['REMOTE_ADDR'], $GLOBALS['TYPO3_CONF_VARS']['SYS']['reverseProxyIP'])) {
					if (self::getIndpEnv('TYPO3_SSL') && $GLOBALS['TYPO3_CONF_VARS']['SYS']['reverseProxyPrefixSSL']) {
						$retVal = $GLOBALS['TYPO3_CONF_VARS']['SYS']['reverseProxyPrefixSSL'] . $retVal;
					} elseif ($GLOBALS['TYPO3_CONF_VARS']['SYS']['reverseProxyPrefix']) {
						$retVal = $GLOBALS['TYPO3_CONF_VARS']['SYS']['reverseProxyPrefix'] . $retVal;
					}
				}
				break;
			case 'PATH_INFO':
					// $_SERVER['PATH_INFO']!=$_SERVER['SCRIPT_NAME'] is necessary because some servers (Windows/CGI) are seen to set PATH_INFO equal to script_name
					// Further, there must be at least one '/' in the path - else the PATH_INFO value does not make sense.
					// IF 'PATH_INFO' never works for our purpose in TYPO3 with CGI-servers, then 'PHP_SAPI=='cgi'' might be a better check. Right now strcmp($_SERVER['PATH_INFO'],t3lib_div::getIndpEnv('SCRIPT_NAME')) will always return false for CGI-versions, but that is only as long as SCRIPT_NAME is set equal to PATH_INFO because of PHP_SAPI=='cgi' (see above)
					//				if (strcmp($_SERVER['PATH_INFO'],self::getIndpEnv('SCRIPT_NAME')) && count(explode('/',$_SERVER['PATH_INFO']))>1)	{
				if (PHP_SAPI != 'cgi' && PHP_SAPI != 'cgi-fcgi' && PHP_SAPI != 'fpm-fcgi') {
					$retVal = $_SERVER['PATH_INFO'];
				}
				break;
			case 'TYPO3_REV_PROXY':
				$retVal = self::cmpIP($_SERVER['REMOTE_ADDR'], $GLOBALS['TYPO3_CONF_VARS']['SYS']['reverseProxyIP']);
				break;
			case 'REMOTE_ADDR':
				$retVal = $_SERVER['REMOTE_ADDR'];
				if (self::cmpIP($_SERVER['REMOTE_ADDR'], $GLOBALS['TYPO3_CONF_VARS']['SYS']['reverseProxyIP'])) {
					$ip = self::trimExplode(',', $_SERVER['HTTP_X_FORWARDED_FOR']);
						// choose which IP in list to use
					if (count($ip)) {
						switch ($GLOBALS['TYPO3_CONF_VARS']['SYS']['reverseProxyHeaderMultiValue']) {
							case 'last':
								$ip = array_pop($ip);
								break;
							case 'first':
								$ip = array_shift($ip);
								break;
							case 'none':
							default:
								$ip = '';
								break;
						}
					}
					if (self::validIP($ip)) {
						$retVal = $ip;
					}
				}
				break;
			case 'HTTP_HOST':
				$retVal = $_SERVER['HTTP_HOST'];
				if (self::cmpIP($_SERVER['REMOTE_ADDR'], $GLOBALS['TYPO3_CONF_VARS']['SYS']['reverseProxyIP'])) {
					$host = self::trimExplode(',', $_SERVER['HTTP_X_FORWARDED_HOST']);
						// choose which host in list to use
					if (count($host)) {
						switch ($GLOBALS['TYPO3_CONF_VARS']['SYS']['reverseProxyHeaderMultiValue']) {
							case 'last':
								$host = array_pop($host);
								break;
							case 'first':
								$host = array_shift($host);
								break;
							case 'none':
							default:
								$host = '';
								break;
						}
					}
					if ($host) {
						$retVal = $host;
					}
				}
				break;
				// These are let through without modification
			case 'HTTP_REFERER':
			case 'HTTP_USER_AGENT':
			case 'HTTP_ACCEPT_ENCODING':
			case 'HTTP_ACCEPT_LANGUAGE':
			case 'REMOTE_HOST':
			case 'QUERY_STRING':
				$retVal = $_SERVER[$getEnvName];
				break;
			case 'TYPO3_DOCUMENT_ROOT':
					// Get the web root (it is not the root of the TYPO3 installation)
					// The absolute path of the script can be calculated with TYPO3_DOCUMENT_ROOT + SCRIPT_FILENAME
					// Some CGI-versions (LA13CGI) and mod-rewrite rules on MODULE versions will deliver a 'wrong' DOCUMENT_ROOT (according to our description). Further various aliases/mod_rewrite rules can disturb this as well.
					// Therefore the DOCUMENT_ROOT is now always calculated as the SCRIPT_FILENAME minus the end part shared with SCRIPT_NAME.
				$SFN = self::getIndpEnv('SCRIPT_FILENAME');
				$SN_A = explode('/', strrev(self::getIndpEnv('SCRIPT_NAME')));
				$SFN_A = explode('/', strrev($SFN));
				$acc = array();
				foreach ($SN_A as $kk => $vv) {
					if (!strcmp($SFN_A[$kk], $vv)) {
						$acc[] = $vv;
					} else {
						break;
					}
				}
				$commonEnd = strrev(implode('/', $acc));
				if (strcmp($commonEnd, '')) {
					$DR = substr($SFN, 0, -(strlen($commonEnd) + 1));
				}
				$retVal = $DR;
				break;
			case 'TYPO3_HOST_ONLY':
				$httpHost = self::getIndpEnv('HTTP_HOST');
				$httpHostBracketPosition = strpos($httpHost, ']');
				$retVal = ($httpHostBracketPosition !== FALSE) ? substr($httpHost, 0, ($httpHostBracketPosition + 1)) : array_shift(explode(':', $httpHost));
				break;
			case 'TYPO3_PORT':
				$httpHost = self::getIndpEnv('HTTP_HOST');
				$httpHostOnly = self::getIndpEnv('TYPO3_HOST_ONLY');
				$retVal = (strlen($httpHost) > strlen($httpHostOnly)) ? substr($httpHost, strlen($httpHostOnly) + 1) : '';
				break;
			case 'TYPO3_REQUEST_HOST':
				$retVal = (self::getIndpEnv('TYPO3_SSL') ? 'https://' : 'http://') .
						self::getIndpEnv('HTTP_HOST');
				break;
			case 'TYPO3_REQUEST_URL':
				$retVal = self::getIndpEnv('TYPO3_REQUEST_HOST') . self::getIndpEnv('REQUEST_URI');
				break;
			case 'TYPO3_REQUEST_SCRIPT':
				$retVal = self::getIndpEnv('TYPO3_REQUEST_HOST') . self::getIndpEnv('SCRIPT_NAME');
				break;
			case 'TYPO3_REQUEST_DIR':
				$retVal = self::getIndpEnv('TYPO3_REQUEST_HOST') . self::dirname(self::getIndpEnv('SCRIPT_NAME')) . '/';
				break;
			case 'TYPO3_SITE_URL':
				if (defined('PATH_thisScript') && defined('PATH_site')) {
					$lPath = substr(dirname(PATH_thisScript), strlen(PATH_site)) . '/';
					$url = self::getIndpEnv('TYPO3_REQUEST_DIR');
					$siteUrl = substr($url, 0, -strlen($lPath));
					if (substr($siteUrl, -1) != '/') {
						$siteUrl .= '/';
					}
					$retVal = $siteUrl;
				}
				break;
			case 'TYPO3_SITE_PATH':
				$retVal = substr(self::getIndpEnv('TYPO3_SITE_URL'), strlen(self::getIndpEnv('TYPO3_REQUEST_HOST')));
				break;
			case 'TYPO3_SITE_SCRIPT':
				$retVal = substr(self::getIndpEnv('TYPO3_REQUEST_URL'), strlen(self::getIndpEnv('TYPO3_SITE_URL')));
				break;
			case 'TYPO3_SSL':
				$proxySSL = trim($GLOBALS['TYPO3_CONF_VARS']['SYS']['reverseProxySSL']);
				if ($proxySSL == '*') {
					$proxySSL = $GLOBALS['TYPO3_CONF_VARS']['SYS']['reverseProxyIP'];
				}
				if (self::cmpIP($_SERVER['REMOTE_ADDR'], $proxySSL)) {
					$retVal = TRUE;
				} else {
					$retVal = $_SERVER['SSL_SESSION_ID'] || !strcasecmp($_SERVER['HTTPS'], 'on') || !strcmp($_SERVER['HTTPS'], '1') ? TRUE : FALSE; // see http://bugs.typo3.org/view.php?id=3909
				}
				break;
			case '_ARRAY':
				$out = array();
					// Here, list ALL possible keys to this function for debug display.
				$envTestVars = self::trimExplode(',', '
					HTTP_HOST,
					TYPO3_HOST_ONLY,
					TYPO3_PORT,
					PATH_INFO,
					QUERY_STRING,
					REQUEST_URI,
					HTTP_REFERER,
					TYPO3_REQUEST_HOST,
					TYPO3_REQUEST_URL,
					TYPO3_REQUEST_SCRIPT,
					TYPO3_REQUEST_DIR,
					TYPO3_SITE_URL,
					TYPO3_SITE_SCRIPT,
					TYPO3_SSL,
					TYPO3_REV_PROXY,
					SCRIPT_NAME,
					TYPO3_DOCUMENT_ROOT,
					SCRIPT_FILENAME,
					REMOTE_ADDR,
					REMOTE_HOST,
					HTTP_USER_AGENT,
					HTTP_ACCEPT_LANGUAGE', 1);
				foreach ($envTestVars as $v) {
					$out[$v] = self::getIndpEnv($v);
				}
				reset($out);
				$retVal = $out;
				break;
		}
		return $retVal;
	}

	/**
	 * Gets the unixtime as milliseconds.
	 *
	 * @return	integer		The unixtime as milliseconds
	 */
	public static function milliseconds() {
		return round(microtime(TRUE) * 1000);
	}

	/**
	 * Client Browser Information
	 * Usage: 4
	 *
	 * @param	string		Alternative User Agent string (if empty, t3lib_div::getIndpEnv('HTTP_USER_AGENT') is used)
	 * @return	array		Parsed information about the HTTP_USER_AGENT in categories BROWSER, VERSION, SYSTEM and FORMSTYLE
	 */
	public static function clientInfo($useragent = '') {
		if (!$useragent) {
			$useragent = self::getIndpEnv('HTTP_USER_AGENT');
		}

		$bInfo = array();
			// Which browser?
		if (strpos($useragent, 'Konqueror') !== FALSE) {
			$bInfo['BROWSER'] = 'konqu';
		} elseif (strpos($useragent, 'Opera') !== FALSE) {
			$bInfo['BROWSER'] = 'opera';
		} elseif (strpos($useragent, 'MSIE') !== FALSE) {
			$bInfo['BROWSER'] = 'msie';
		} elseif (strpos($useragent, 'Mozilla') !== FALSE) {
			$bInfo['BROWSER'] = 'net';
		} elseif (strpos($useragent, 'Flash') !== FALSE) {
			$bInfo['BROWSER'] = 'flash';
		}
		if ($bInfo['BROWSER']) {
				// Browser version
			switch ($bInfo['BROWSER']) {
				case 'net':
					$bInfo['VERSION'] = doubleval(substr($useragent, 8));
					if (strpos($useragent, 'Netscape6/') !== FALSE) {
						$bInfo['VERSION'] = doubleval(substr(strstr($useragent, 'Netscape6/'), 10));
					} // Will we ever know if this was a typo or intention...?! :-(
					if (strpos($useragent, 'Netscape/6') !== FALSE) {
						$bInfo['VERSION'] = doubleval(substr(strstr($useragent, 'Netscape/6'), 10));
					}
					if (strpos($useragent, 'Netscape/7') !== FALSE) {
						$bInfo['VERSION'] = doubleval(substr(strstr($useragent, 'Netscape/7'), 9));
					}
					break;
				case 'msie':
					$tmp = strstr($useragent, 'MSIE');
					$bInfo['VERSION'] = doubleval(preg_replace('/^[^0-9]*/', '', substr($tmp, 4)));
					break;
				case 'opera':
					$tmp = strstr($useragent, 'Opera');
					$bInfo['VERSION'] = doubleval(preg_replace('/^[^0-9]*/', '', substr($tmp, 5)));
					break;
				case 'konqu':
					$tmp = strstr($useragent, 'Konqueror/');
					$bInfo['VERSION'] = doubleval(substr($tmp, 10));
					break;
			}
			// Client system
			if (strpos($useragent, 'Win') !== FALSE) {
				$bInfo['SYSTEM'] = 'win';
			} elseif (strpos($useragent, 'Mac') !== FALSE) {
				$bInfo['SYSTEM'] = 'mac';
			} elseif (strpos($useragent, 'Linux') !== FALSE || strpos($useragent, 'X11') !== FALSE || strpos($useragent, 'SGI') !== FALSE || strpos($useragent, ' SunOS ') !== FALSE || strpos($useragent, ' HP-UX ') !== FALSE) {
				$bInfo['SYSTEM'] = 'unix';
			}
		}
		// Is true if the browser supports css to format forms, especially the width
		$bInfo['FORMSTYLE'] = ($bInfo['BROWSER'] == 'msie' || ($bInfo['BROWSER'] == 'net' && $bInfo['VERSION'] >= 5) || $bInfo['BROWSER'] == 'opera' || $bInfo['BROWSER'] == 'konqu');

		return $bInfo;
	}

	/**
	 * Get the fully-qualified domain name of the host.
	 * Usage: 2
	 *
	 * @param	boolean		Use request host (when not in CLI mode).
	 * @return	string		The fully-qualified host name.
	 */
	public static function getHostname($requestHost = TRUE) {
		$host = '';
			// If not called from the command-line, resolve on getIndpEnv()
			// Note that TYPO3_REQUESTTYPE is not used here as it may not yet be defined
		if ($requestHost && (!defined('TYPO3_cliMode') || !TYPO3_cliMode)) {
			$host = self::getIndpEnv('HTTP_HOST');
		}
		if (!$host) {
				// will fail for PHP 4.1 and 4.2
			$host = @php_uname('n');
				// 'n' is ignored in broken installations
			if (strpos($host, ' ')) {
				$host = '';
			}
		}
			// we have not found a FQDN yet
		if ($host && strpos($host, '.') === FALSE) {
			$ip = gethostbyname($host);
				// we got an IP address
			if ($ip != $host) {
				$fqdn = gethostbyaddr($ip);
				if ($ip != $fqdn) {
					$host = $fqdn;
				}
			}
		}
		if (!$host) {
			$host = 'localhost.localdomain';
		}

		return $host;
	}


	/*************************
	 *
	 * TYPO3 SPECIFIC FUNCTIONS
	 *
	 *************************/

	/**
	 * Returns the absolute filename of a relative reference, resolves the "EXT:" prefix (way of referring to files inside extensions) and checks that the file is inside the PATH_site of the TYPO3 installation and implies a check with t3lib_div::validPathStr(). Returns false if checks failed. Does not check if the file exists.
	 * Usage: 24
	 *
	 * @param	string		The input filename/filepath to evaluate
	 * @param	boolean		If $onlyRelative is set (which it is by default), then only return values relative to the current PATH_site is accepted.
	 * @param	boolean		If $relToTYPO3_mainDir is set, then relative paths are relative to PATH_typo3 constant - otherwise (default) they are relative to PATH_site
	 * @return	string		Returns the absolute filename of $filename IF valid, otherwise blank string.
	 */
	public static function getFileAbsFileName($filename, $onlyRelative = TRUE, $relToTYPO3_mainDir = FALSE) {
		if (!strcmp($filename, '')) {
			return '';
		}

		if ($relToTYPO3_mainDir) {
			if (!defined('PATH_typo3')) {
				return '';
			}
			$relPathPrefix = PATH_typo3;
		} else {
			$relPathPrefix = PATH_site;
		}
		if (substr($filename, 0, 4) == 'EXT:') { // extension
			list($extKey, $local) = explode('/', substr($filename, 4), 2);
			$filename = '';
			if (strcmp($extKey, '') && t3lib_extMgm::isLoaded($extKey) && strcmp($local, '')) {
				$filename = t3lib_extMgm::extPath($extKey) . $local;
			}
		} elseif (!self::isAbsPath($filename)) { // relative. Prepended with $relPathPrefix
			$filename = $relPathPrefix . $filename;
		} elseif ($onlyRelative && !self::isFirstPartOfStr($filename, $relPathPrefix)) { // absolute, but set to blank if not allowed
			$filename = '';
		}
		if (strcmp($filename, '') && self::validPathStr($filename)) { // checks backpath.
			return $filename;
		}
	}

	/**
	 * Checks for malicious file paths.
	 *
	 * Returns TRUE if no '//', '..', '\' or control characters are found in the $theFile.
	 * This should make sure that the path is not pointing 'backwards' and further doesn't contain double/back slashes.
	 * So it's compatible with the UNIX style path strings valid for TYPO3 internally.
	 * Usage: 14
	 *
	 * @param	string		Filepath to evaluate
	 * @return	boolean		TRUE, $theFile is allowed path string
	 * @see		http://php.net/manual/en/security.filesystem.nullbytes.php
	 * @todo	Possible improvement: Should it rawurldecode the string first to check if any of these characters is encoded ?
	 */
	public static function validPathStr($theFile) {
		if (strpos($theFile, '//') === FALSE && strpos($theFile, '\\') === FALSE && !preg_match('#(?:^\.\.|/\.\./|[[:cntrl:]])#', $theFile)) {
			return TRUE;
		}
	}

	/**
	 * Checks if the $path is absolute or relative (detecting either '/' or 'x:/' as first part of string) and returns true if so.
	 * Usage: 8
	 *
	 * @param	string		Filepath to evaluate
	 * @return	boolean
	 */
	public static function isAbsPath($path) {
			// on Windows also a path starting with a drive letter is absolute: X:/
		if (TYPO3_OS === 'WIN' && substr($path, 1, 2) === ':/') {
			return TRUE;
		}

			// path starting with a / is always absolute, on every system
		return (substr($path, 0, 1) === '/');
	}

	/**
	 * Returns true if the path is absolute, without backpath '..' and within the PATH_site OR within the lockRootPath
	 * Usage: 5
	 *
	 * @param	string		Filepath to evaluate
	 * @return	boolean
	 */
	public static function isAllowedAbsPath($path) {
		if (self::isAbsPath($path) &&
				self::validPathStr($path) &&
				(self::isFirstPartOfStr($path, PATH_site)
						||
						($GLOBALS['TYPO3_CONF_VARS']['BE']['lockRootPath'] && self::isFirstPartOfStr($path, $GLOBALS['TYPO3_CONF_VARS']['BE']['lockRootPath']))
				)
		) {
			return TRUE;
		}
	}

	/**
	 * Verifies the input filename againts the 'fileDenyPattern'. Returns true if OK.
	 * Usage: 2
	 *
	 * @param	string		Filepath to evaluate
	 * @return	boolean
	 */
	public static function verifyFilenameAgainstDenyPattern($filename) {
			// Filenames are not allowed to contain control characters
		if (preg_match('/[[:cntrl:]]/', $filename)) {
			return FALSE;
		}

		if (strcmp($filename, '') && strcmp($GLOBALS['TYPO3_CONF_VARS']['BE']['fileDenyPattern'], '')) {
			$result = preg_match('/' . $GLOBALS['TYPO3_CONF_VARS']['BE']['fileDenyPattern'] . '/i', $filename);
			if ($result) {
				return FALSE;
			} // so if a matching filename is found, return FALSE;
		}
		return TRUE;
	}

	/**
	 * Checks if a given string is a valid frame URL to be loaded in the
	 * backend.
	 *
	 * @param string $url potential URL to check
	 *
	 * @return string either $url if $url is considered to be harmless, or an
	 *				empty string otherwise
	 */
	public static function sanitizeLocalUrl($url = '') {
		$sanitizedUrl = '';
		$decodedUrl = rawurldecode($url);

		if (!empty($url) && self::removeXSS($decodedUrl) === $decodedUrl) {
			$testAbsoluteUrl = self::resolveBackPath($decodedUrl);
			$testRelativeUrl = self::resolveBackPath(
				self::dirname(self::getIndpEnv('SCRIPT_NAME')) . '/' . $decodedUrl
			);

				// Pass if URL is on the current host:
			if (self::isValidUrl($decodedUrl)) {
				if (self::isOnCurrentHost($decodedUrl) && strpos($decodedUrl, self::getIndpEnv('TYPO3_SITE_URL')) === 0) {
					$sanitizedUrl = $url;
				}
				// Pass if URL is an absolute file path:
			} elseif (self::isAbsPath($decodedUrl) && self::isAllowedAbsPath($decodedUrl)) {
				$sanitizedUrl = $url;
				// Pass if URL is absolute and below TYPO3 base directory:
			} elseif (strpos($testAbsoluteUrl, self::getIndpEnv('TYPO3_SITE_PATH')) === 0 && substr($decodedUrl, 0, 1) === '/') {
				$sanitizedUrl = $url;
				// Pass if URL is relative and below TYPO3 base directory:
			} elseif (strpos($testRelativeUrl, self::getIndpEnv('TYPO3_SITE_PATH')) === 0 && substr($decodedUrl, 0, 1) !== '/') {
				$sanitizedUrl = $url;
			}
		}

		if (!empty($url) && empty($sanitizedUrl)) {
			self::sysLog('The URL "' . $url . '" is not considered to be local and was denied.', 'Core', self::SYSLOG_SEVERITY_NOTICE);
		}

		return $sanitizedUrl;
	}

	/**
	 * Moves $source file to $destination if uploaded, otherwise try to make a copy
	 * Usage: 4
	 *
	 * @param	string		Source file, absolute path
	 * @param	string		Destination file, absolute path
	 * @return	boolean		Returns true if the file was moved.
	 * @coauthor	Dennis Petersen <fessor@software.dk>
	 * @see upload_to_tempfile()
	 */
	public static function upload_copy_move($source, $destination) {
		if (is_uploaded_file($source)) {
			$uploaded = TRUE;
				// Return the value of move_uploaded_file, and if false the temporary $source is still around so the user can use unlink to delete it:
			$uploadedResult = move_uploaded_file($source, $destination);
		} else {
			$uploaded = FALSE;
			@copy($source, $destination);
		}

		self::fixPermissions($destination); // Change the permissions of the file

			// If here the file is copied and the temporary $source is still around, so when returning false the user can try unlink to delete the $source
		return $uploaded ? $uploadedResult : FALSE;
	}

	/**
	 * Will move an uploaded file (normally in "/tmp/xxxxx") to a temporary filename in PATH_site."typo3temp/" from where TYPO3 can use it under safe_mode.
	 * Use this function to move uploaded files to where you can work on them.
	 * REMEMBER to use t3lib_div::unlink_tempfile() afterwards - otherwise temp-files will build up! They are NOT automatically deleted in PATH_site."typo3temp/"!
	 * Usage: 6
	 *
	 * @param	string		The temporary uploaded filename, eg. $_FILES['[upload field name here]']['tmp_name']
	 * @return	string		If a new file was successfully created, return its filename, otherwise blank string.
	 * @see unlink_tempfile(), upload_copy_move()
	 */
	public static function upload_to_tempfile($uploadedFileName) {
		if (is_uploaded_file($uploadedFileName)) {
			$tempFile = self::tempnam('upload_temp_');
			move_uploaded_file($uploadedFileName, $tempFile);
			return @is_file($tempFile) ? $tempFile : '';
		}
	}

	/**
	 * Deletes (unlink) a temporary filename in 'PATH_site."typo3temp/"' given as input.
	 * The function will check that the file exists, is in PATH_site."typo3temp/" and does not contain back-spaces ("../") so it should be pretty safe.
	 * Use this after upload_to_tempfile() or tempnam() from this class!
	 * Usage: 9
	 *
	 * @param	string		Filepath for a file in PATH_site."typo3temp/". Must be absolute.
	 * @return	boolean		Returns true if the file was unlink()'ed
	 * @see upload_to_tempfile(), tempnam()
	 */
	public static function unlink_tempfile($uploadedTempFileName) {
		if ($uploadedTempFileName && self::validPathStr($uploadedTempFileName) && self::isFirstPartOfStr($uploadedTempFileName, PATH_site . 'typo3temp/') && @is_file($uploadedTempFileName)) {
			if (unlink($uploadedTempFileName)) {
				return TRUE;
			}
		}
	}

	/**
	 * Create temporary filename (Create file with unique file name)
	 * This function should be used for getting temporary filenames - will make your applications safe for open_basedir = on
	 * REMEMBER to delete the temporary files after use! This is done by t3lib_div::unlink_tempfile()
	 * Usage: 7
	 *
	 * @param	string		Prefix to temp file (which will have no extension btw)
	 * @return	string		result from PHP function tempnam() with PATH_site.'typo3temp/' set for temp path.
	 * @see unlink_tempfile(), upload_to_tempfile()
	 */
	public static function tempnam($filePrefix) {
		return tempnam(PATH_site . 'typo3temp/', $filePrefix);
	}

	/**
	 * Standard authentication code (used in Direct Mail, checkJumpUrl and setfixed links computations)
	 * Usage: 2
	 *
	 * @param	mixed		Uid (integer) or record (array)
	 * @param	string		List of fields from the record if that is given.
	 * @param	integer		Length of returned authentication code.
	 * @return	string		MD5 hash of 8 chars.
	 */
	public static function stdAuthCode($uid_or_record, $fields = '', $codeLength = 8) {

		if (is_array($uid_or_record)) {
			$recCopy_temp = array();
			if ($fields) {
				$fieldArr = self::trimExplode(',', $fields, 1);
				foreach ($fieldArr as $k => $v) {
					$recCopy_temp[$k] = $uid_or_record[$v];
				}
			} else {
				$recCopy_temp = $uid_or_record;
			}
			$preKey = implode('|', $recCopy_temp);
		} else {
			$preKey = $uid_or_record;
		}

		$authCode = $preKey . '||' . $GLOBALS['TYPO3_CONF_VARS']['SYS']['encryptionKey'];
		$authCode = substr(md5($authCode), 0, $codeLength);
		return $authCode;
	}

	/**
	 * Splits the input query-parameters into an array with certain parameters filtered out.
	 * Used to create the cHash value
	 *
	 * @param	string		Query-parameters: "&xxx=yyy&zzz=uuu"
	 * @return	array		Array with key/value pairs of query-parameters WITHOUT a certain list of variable names (like id, type, no_cache etc.) and WITH a variable, encryptionKey, specific for this server/installation
	 * @see tslib_fe::makeCacheHash(), tslib_cObj::typoLink(), t3lib_div::calculateCHash()
	 */
	public static function cHashParams($addQueryParams) {
		$params = explode('&', substr($addQueryParams, 1)); // Splitting parameters up

			// Make array:
		$pA = array();
		foreach ($params as $theP) {
			$pKV = explode('=', $theP); // Splitting single param by '=' sign
			if (!self::inList('id,type,no_cache,cHash,MP,ftu', $pKV[0]) && !preg_match('/TSFE_ADMIN_PANEL\[.*?\]/', $pKV[0])) {
				$pA[rawurldecode($pKV[0])] = (string) rawurldecode($pKV[1]);
			}
		}
			// Hook: Allows to manipulate the parameters which are taken to build the chash:
		if (isset($GLOBALS['TYPO3_CONF_VARS']['SC_OPTIONS']['t3lib/class.t3lib_div.php']['cHashParamsHook'])) {
			$cHashParamsHook =& $GLOBALS['TYPO3_CONF_VARS']['SC_OPTIONS']['t3lib/class.t3lib_div.php']['cHashParamsHook'];
			if (is_array($cHashParamsHook)) {
				$hookParameters = array(
					'addQueryParams' => &$addQueryParams,
					'params' => &$params,
					'pA' => &$pA,
				);
				$hookReference = NULL;
				foreach ($cHashParamsHook as $hookFunction) {
					self::callUserFunction($hookFunction, $hookParameters, $hookReference);
				}
			}
		}
			// Finish and sort parameters array by keys:
		$pA['encryptionKey'] = $GLOBALS['TYPO3_CONF_VARS']['SYS']['encryptionKey'];
		ksort($pA);

		return $pA;
	}

	/**
	 * Returns the cHash based on provided query parameters and added values from internal call
	 *
	 * @param	string		Query-parameters: "&xxx=yyy&zzz=uuu"
	 * @return	string		Hash of all the values
	 * @see t3lib_div::cHashParams(), t3lib_div::calculateCHash()
	 */
	public static function generateCHash($addQueryParams) {
		$cHashParams = self::cHashParams($addQueryParams);
		$cHash = self::calculateCHash($cHashParams);
		return $cHash;
	}

	/**
	 * Calculates the cHash based on the provided parameters
	 *
	 * @param	array		Array of key-value pairs
	 * @return	string		Hash of all the values
	 */
	public static function calculateCHash($params) {
		$cHash = md5(serialize($params));
		return $cHash;
	}

	/**
	 * Responds on input localization setting value whether the page it comes from should be hidden if no translation exists or not.
	 *
	 * @param	integer		Value from "l18n_cfg" field of a page record
	 * @return	boolean		True if the page should be hidden
	 */
	public static function hideIfNotTranslated($l18n_cfg_fieldValue) {
		if ($GLOBALS['TYPO3_CONF_VARS']['FE']['hidePagesIfNotTranslatedByDefault']) {
			return $l18n_cfg_fieldValue & 2 ? FALSE : TRUE;
		} else {
			return $l18n_cfg_fieldValue & 2 ? TRUE : FALSE;
		}
	}

	/**
	 * Includes a locallang file and returns the $LOCAL_LANG array found inside.
	 *
	 * @param	string		Input is a file-reference (see t3lib_div::getFileAbsFileName). That file is expected to be a 'locallang.php' file containing a $LOCAL_LANG array (will be included!) or a 'locallang.xml' file conataining a valid XML TYPO3 language structure.
	 * @param	string		Language key
	 * @param	string		Character set (option); if not set, determined by the language key
	 * @param	integer		Error mode (when file could not be found): 0 - syslog entry, 1 - do nothing, 2 - throw an exception
	 * @return	array		Value of $LOCAL_LANG found in the included file. If that array is found it  will returned.
	 *						 Otherwise an empty array and it is FALSE in error case.
	 */
	public static function readLLfile($fileRef, $langKey, $charset = '', $errorMode = 0) {

		$result = FALSE;
		$file = self::getFileAbsFileName($fileRef);
		if ($file) {
			$baseFile = preg_replace('/\.(php|xml)$/', '', $file);

			if (@is_file($baseFile . '.xml')) {
				$LOCAL_LANG = self::readLLXMLfile($baseFile . '.xml', $langKey, $charset);
			} elseif (@is_file($baseFile . '.php')) {
				if ($GLOBALS['TYPO3_CONF_VARS']['BE']['forceCharset'] || $charset) {
					$LOCAL_LANG = self::readLLPHPfile($baseFile . '.php', $langKey, $charset);
				} else {
					include($baseFile . '.php');
					if (is_array($LOCAL_LANG)) {
						$LOCAL_LANG = array('default' => $LOCAL_LANG['default'], $langKey => $LOCAL_LANG[$langKey]);
					}
				}
			} else {
				$errorMsg = 'File "' . $fileRef . '" not found!';
				if ($errorMode == 2) {
					throw new t3lib_exception($errorMsg);
				} elseif (!$errorMode) {
					self::sysLog($errorMsg, 'Core', self::SYSLOG_SEVERITY_ERROR);
				}
				$fileNotFound = TRUE;
			}


			$overrides = array();
			$fileRefWithoutExtension = preg_replace('/\.(php|xml)$/', '', $fileRef);

			if (is_array($GLOBALS['TYPO3_CONF_VARS']['SYS']['locallangXMLOverride'][$fileRefWithoutExtension . '.php'])) {
				$overrides = array_merge($overrides, $GLOBALS['TYPO3_CONF_VARS']['SYS']['locallangXMLOverride'][$fileRefWithoutExtension . '.php']);
			}
			if (is_array($GLOBALS['TYPO3_CONF_VARS']['SYS']['locallangXMLOverride'][$fileRefWithoutExtension . '.xml'])) {
				$overrides = array_merge($overrides, $GLOBALS['TYPO3_CONF_VARS']['SYS']['locallangXMLOverride'][$fileRefWithoutExtension . '.xml']);
			}

			if (count($overrides) > 0) {
				foreach ($overrides as $overrideFile) {
					$languageOverrideFileName = self::getFileAbsFileName($overrideFile);
					if (@is_file($languageOverrideFileName)) {
						$languageOverrideArray = self::readLLXMLfile($languageOverrideFileName, $langKey, $charset);
						$LOCAL_LANG = self::array_merge_recursive_overrule($LOCAL_LANG, $languageOverrideArray);
					}
				}
			}
		}
		if ($fileNotFound !== TRUE) {
			$result = is_array($LOCAL_LANG) ? $LOCAL_LANG : array();
		}
		return $result;
	}

	/**
	 * Includes a locallang-php file and returns the $LOCAL_LANG array
	 * Works only when the frontend or backend has been initialized with a charset conversion object. See first code lines.
	 *
	 * @param	string		Absolute reference to locallang-PHP file
	 * @param	string		TYPO3 language key, eg. "dk" or "de" or "default"
	 * @param	string		Character set (optional)
	 * @return	array		LOCAL_LANG array in return.
	 */
	public static function readLLPHPfile($fileRef, $langKey, $charset = '') {

		if (is_object($GLOBALS['LANG'])) {
			$csConvObj = $GLOBALS['LANG']->csConvObj;
		} elseif (is_object($GLOBALS['TSFE'])) {
			$csConvObj = $GLOBALS['TSFE']->csConvObj;
		} else {
			$csConvObj = self::makeInstance('t3lib_cs');
		}

		if (@is_file($fileRef) && $langKey) {

				// Set charsets:
			$sourceCharset = $csConvObj->parse_charset($csConvObj->charSetArray[$langKey] ? $csConvObj->charSetArray[$langKey] : 'iso-8859-1');
			if ($charset) {
				$targetCharset = $csConvObj->parse_charset($charset);
			} elseif ($GLOBALS['TYPO3_CONF_VARS']['BE']['forceCharset']) {
					// when forceCharset is set, we store ALL labels in this charset!!!
				$targetCharset = $csConvObj->parse_charset($GLOBALS['TYPO3_CONF_VARS']['BE']['forceCharset']);
			} else {
				$targetCharset = $csConvObj->parse_charset($csConvObj->charSetArray[$langKey] ? $csConvObj->charSetArray[$langKey] : 'iso-8859-1');
			}

				// Cache file name:
			$hashSource = substr($fileRef, strlen(PATH_site)) . '|' . date('d-m-Y H:i:s', filemtime($fileRef)) . '|version=2.3';
			$cacheFileName = PATH_site . 'typo3temp/llxml/' .
					substr(basename($fileRef), 10, 15) .
					'_' . self::shortMD5($hashSource) . '.' . $langKey . '.' . $targetCharset . '.cache';
				// Check if cache file exists...
			if (!@is_file($cacheFileName)) { // ... if it doesn't, create content and write it:
				$LOCAL_LANG = NULL;
					// Get PHP data
				include($fileRef);
				if (!is_array($LOCAL_LANG)) {
					$fileName = substr($fileRef, strlen(PATH_site));
					throw new RuntimeException(
						'TYPO3 Fatal Error: "' . $fileName . '" is no TYPO3 language file!',
						1270853900
					);
				}

					// converting the default language (English)
					// this needs to be done for a few accented loan words and extension names
				if (is_array($LOCAL_LANG['default']) && $targetCharset != 'iso-8859-1') {
					foreach ($LOCAL_LANG['default'] as &$labelValue) {
						$labelValue = $csConvObj->conv($labelValue, 'iso-8859-1', $targetCharset);
					}
				}

				if ($langKey != 'default' && is_array($LOCAL_LANG[$langKey]) && $sourceCharset != $targetCharset) {
					foreach ($LOCAL_LANG[$langKey] as &$labelValue) {
						$labelValue = $csConvObj->conv($labelValue, $sourceCharset, $targetCharset);
					}
				}

					// Cache the content now:
				$serContent = array('origFile' => $hashSource, 'LOCAL_LANG' => array('default' => $LOCAL_LANG['default'], $langKey => $LOCAL_LANG[$langKey]));
				$res = self::writeFileToTypo3tempDir($cacheFileName, serialize($serContent));
				if ($res) {
					throw new RuntimeException(
						'TYPO3 Fatal Error: "' . $res,
						1270853901
					);
				}
			} else {
					// Get content from cache:
				$serContent = unserialize(self::getUrl($cacheFileName));
				$LOCAL_LANG = $serContent['LOCAL_LANG'];
			}

			return $LOCAL_LANG;
		}
	}

	/**
	 * Includes a locallang-xml file and returns the $LOCAL_LANG array
	 * Works only when the frontend or backend has been initialized with a charset conversion object. See first code lines.
	 *
	 * @param	string		Absolute reference to locallang-XML file
	 * @param	string		TYPO3 language key, eg. "dk" or "de" or "default"
	 * @param	string		Character set (optional)
	 * @return	array		LOCAL_LANG array in return.
	 */
	public static function readLLXMLfile($fileRef, $langKey, $charset = '') {

		if (is_object($GLOBALS['LANG'])) {
			$csConvObj = $GLOBALS['LANG']->csConvObj;
		} elseif (is_object($GLOBALS['TSFE'])) {
			$csConvObj = $GLOBALS['TSFE']->csConvObj;
		} else {
			$csConvObj = self::makeInstance('t3lib_cs');
		}

		$LOCAL_LANG = NULL;
		if (@is_file($fileRef) && $langKey) {

				// Set charset:
			if ($charset) {
				$targetCharset = $csConvObj->parse_charset($charset);
			} elseif ($GLOBALS['TYPO3_CONF_VARS']['BE']['forceCharset']) {
					// when forceCharset is set, we store ALL labels in this charset!!!
				$targetCharset = $csConvObj->parse_charset($GLOBALS['TYPO3_CONF_VARS']['BE']['forceCharset']);
			} else {
				$targetCharset = $csConvObj->parse_charset($csConvObj->charSetArray[$langKey] ? $csConvObj->charSetArray[$langKey] : 'iso-8859-1');
			}

				// Cache file name:
			$hashSource = substr($fileRef, strlen(PATH_site)) . '|' . date('d-m-Y H:i:s', filemtime($fileRef)) . '|version=2.3';
			$cacheFileName = PATH_site . 'typo3temp/llxml/' .
					substr(basename($fileRef), 10, 15) .
					'_' . self::shortMD5($hashSource) . '.' . $langKey . '.' . $targetCharset . '.cache';

				// Check if cache file exists...
			if (!@is_file($cacheFileName)) { // ... if it doesn't, create content and write it:

					// Read XML, parse it.
				$xmlString = self::getUrl($fileRef);
				$xmlContent = self::xml2array($xmlString);
				if (!is_array($xmlContent)) {
					$fileName = substr($fileRef, strlen(PATH_site));
					throw new RuntimeException(
						'TYPO3 Fatal Error: The file "' . $fileName . '" is no TYPO3 language file!',
						1270853902
					);
				}

					// Set default LOCAL_LANG array content:
				$LOCAL_LANG = array();
				$LOCAL_LANG['default'] = $xmlContent['data']['default'];

					// converting the default language (English)
					// this needs to be done for a few accented loan words and extension names
					// NOTE: no conversion is done when in UTF-8 mode!
				if (is_array($LOCAL_LANG['default']) && $targetCharset != 'utf-8') {
					foreach ($LOCAL_LANG['default'] as &$labelValue) {
						$labelValue = $csConvObj->utf8_decode($labelValue, $targetCharset);
					}
					unset($labelValue);
				}

					// converting other languages to their "native" charsets
					// NOTE: no conversion is done when in UTF-8 mode!
				if ($langKey != 'default') {

						// If no entry is found for the language key, then force a value depending on meta-data setting. By default an automated filename will be used:
					$LOCAL_LANG[$langKey] = self::llXmlAutoFileName($fileRef, $langKey);
					$localized_file = self::getFileAbsFileName($LOCAL_LANG[$langKey]);
					if (!@is_file($localized_file) && isset($xmlContent['data'][$langKey])) {
						$LOCAL_LANG[$langKey] = $xmlContent['data'][$langKey];
					}

						// Checking if charset should be converted.
					if (is_array($LOCAL_LANG[$langKey]) && $targetCharset != 'utf-8') {
						foreach ($LOCAL_LANG[$langKey] as $labelKey => $labelValue) {
							$LOCAL_LANG[$langKey][$labelKey] = $csConvObj->utf8_decode($labelValue, $targetCharset);
						}
					}
				}

					// Cache the content now:
				$serContent = array('origFile' => $hashSource, 'LOCAL_LANG' => array('default' => $LOCAL_LANG['default'], $langKey => $LOCAL_LANG[$langKey]));
				$res = self::writeFileToTypo3tempDir($cacheFileName, serialize($serContent));
				if ($res) {
					throw new RuntimeException(
						'TYPO3 Fatal Error: ' . $res,
						1270853903
					);
				}
			} else {
					// Get content from cache:
				$serContent = unserialize(self::getUrl($cacheFileName));
				$LOCAL_LANG = $serContent['LOCAL_LANG'];
			}

				// Checking for EXTERNAL file for non-default language:
			if ($langKey != 'default' && is_string($LOCAL_LANG[$langKey]) && strlen($LOCAL_LANG[$langKey])) {

					// Look for localized file:
				$localized_file = self::getFileAbsFileName($LOCAL_LANG[$langKey]);
				if ($localized_file && @is_file($localized_file)) {

						// Cache file name:
					$hashSource = substr($localized_file, strlen(PATH_site)) . '|' . date('d-m-Y H:i:s', filemtime($localized_file)) . '|version=2.3';
					$cacheFileName = PATH_site . 'typo3temp/llxml/EXT_' .
							substr(basename($localized_file), 10, 15) .
							'_' . self::shortMD5($hashSource) . '.' . $langKey . '.' . $targetCharset . '.cache';

						// Check if cache file exists...
					if (!@is_file($cacheFileName)) { // ... if it doesn't, create content and write it:

							// Read and parse XML content:
						$local_xmlString = self::getUrl($localized_file);
						$local_xmlContent = self::xml2array($local_xmlString);
						if (!is_array($local_xmlContent)) {
							$fileName = substr($localized_file, strlen(PATH_site));
							throw new RuntimeException(
								'TYPO3 Fatal Error: The file "' . $fileName . '" is no TYPO3 language file!',
								1270853904
							);
						}
						$LOCAL_LANG[$langKey] = is_array($local_xmlContent['data'][$langKey]) ? $local_xmlContent['data'][$langKey] : array();

							// Checking if charset should be converted.
						if (is_array($LOCAL_LANG[$langKey]) && $targetCharset != 'utf-8') {
							foreach ($LOCAL_LANG[$langKey] as $labelKey => $labelValue) {
								$LOCAL_LANG[$langKey][$labelKey] = $csConvObj->utf8_decode($labelValue, $targetCharset);
							}
						}

							// Cache the content now:
						$serContent = array('extlang' => $langKey, 'origFile' => $hashSource, 'EXT_DATA' => $LOCAL_LANG[$langKey]);
						$res = self::writeFileToTypo3tempDir($cacheFileName, serialize($serContent));
						if ($res) {
							throw new RuntimeException(
								'TYPO3 Fatal Error: ' . $res,
								1270853905
							);
						}
					} else {
							// Get content from cache:
						$serContent = unserialize(self::getUrl($cacheFileName));
						$LOCAL_LANG[$langKey] = $serContent['EXT_DATA'];
					}
				} else {
					$LOCAL_LANG[$langKey] = array();
				}
			}

			return $LOCAL_LANG;
		}
	}

	/**
	 * Returns auto-filename for locallang-XML localizations.
	 *
	 * @param	string		Absolute file reference to locallang-XML file. Must be inside system/global/local extension
	 * @param	string		Language key
	 * @return	string		Returns the filename reference for the language unless error occured (or local mode is used) in which case it will be NULL
	 */
	public static function llXmlAutoFileName($fileRef, $language) {
			// Analyse file reference:
		$location = 'typo3conf/l10n/' . $language . '/'; // Default location of translations
		if (self::isFirstPartOfStr($fileRef, PATH_typo3 . 'sysext/')) { // Is system:
			$validatedPrefix = PATH_typo3 . 'sysext/';
			#$location = 'EXT:csh_'.$language.'/';	// For system extensions translations are found in "csh_*" extensions (language packs)
		} elseif (self::isFirstPartOfStr($fileRef, PATH_typo3 . 'ext/')) { // Is global:
			$validatedPrefix = PATH_typo3 . 'ext/';
		} elseif (self::isFirstPartOfStr($fileRef, PATH_typo3conf . 'ext/')) { // Is local:
			$validatedPrefix = PATH_typo3conf . 'ext/';
		} else {
			$validatedPrefix = '';
		}

		if ($validatedPrefix) {

				// Divide file reference into extension key, directory (if any) and base name:
			list($file_extKey, $file_extPath) = explode('/', substr($fileRef, strlen($validatedPrefix)), 2);
			$temp = self::revExplode('/', $file_extPath, 2);
			if (count($temp) == 1) {
				array_unshift($temp, '');
			} // Add empty first-entry if not there.
			list($file_extPath, $file_fileName) = $temp;

				// The filename is prefixed with "[language key]." because it prevents the llxmltranslate tool from detecting it.
			return $location .
					$file_extKey . '/' .
					($file_extPath ? $file_extPath . '/' : '') .
					$language . '.' . $file_fileName;
		} else {
			return NULL;
		}
	}


	/**
	 * Loads the $TCA (Table Configuration Array) for the $table
	 *
	 * Requirements:
	 * 1) must be configured table (the ctrl-section configured),
	 * 2) columns must not be an array (which it is always if whole table loaded), and
	 * 3) there is a value for dynamicConfigFile (filename in typo3conf)
	 *
	 * Note: For the frontend this loads only 'ctrl' and 'feInterface' parts.
	 * For complete TCA use $GLOBALS['TSFE']->includeTCA() instead.
	 *
	 * Usage: 84
	 *
	 * @param	string		Table name for which to load the full TCA array part into the global $TCA
	 * @return	void
	 */
	public static function loadTCA($table) {
		global $TCA;

		if (isset($TCA[$table])) {
			$tca = &$TCA[$table];
			if (!$tca['columns']) {
				$dcf = $tca['ctrl']['dynamicConfigFile'];
				if ($dcf) {
					if (!strcmp(substr($dcf, 0, 6), 'T3LIB:')) {
						include(PATH_t3lib . 'stddb/' . substr($dcf, 6));
					} elseif (self::isAbsPath($dcf) && @is_file($dcf)) { // Absolute path...
						include($dcf);
					} else {
						include(PATH_typo3conf . $dcf);
					}
				}
			}
		}
	}

	/**
	 * Looks for a sheet-definition in the input data structure array. If found it will return the data structure for the sheet given as $sheet (if found).
	 * If the sheet definition is in an external file that file is parsed and the data structure inside of that is returned.
	 * Usage: 5
	 *
	 * @param	array		Input data structure, possibly with a sheet-definition and references to external data source files.
	 * @param	string		The sheet to return, preferably.
	 * @return	array		An array with two num. keys: key0: The data structure is returned in this key (array) UNLESS an error happend in which case an error string is returned (string). key1: The used sheet key value!
	 */
	public static function resolveSheetDefInDS($dataStructArray, $sheet = 'sDEF') {
		if (!is_array($dataStructArray)) {
			return 'Data structure must be an array';
		}

		if (is_array($dataStructArray['sheets'])) {
			$singleSheet = FALSE;
			if (!isset($dataStructArray['sheets'][$sheet])) {
				$sheet = 'sDEF';
			}
			$dataStruct = $dataStructArray['sheets'][$sheet];

				// If not an array, but still set, then regard it as a relative reference to a file:
			if ($dataStruct && !is_array($dataStruct)) {
				$file = self::getFileAbsFileName($dataStruct);
				if ($file && @is_file($file)) {
					$dataStruct = self::xml2array(self::getUrl($file));
				}
			}
		} else {
			$singleSheet = TRUE;
			$dataStruct = $dataStructArray;
			if (isset($dataStruct['meta'])) {
				unset($dataStruct['meta']);
			} // Meta data should not appear there.
			$sheet = 'sDEF'; // Default sheet
		}
		return array($dataStruct, $sheet, $singleSheet);
	}

	/**
	 * Resolves ALL sheet definitions in dataStructArray
	 * If no sheet is found, then the default "sDEF" will be created with the dataStructure inside.
	 *
	 * @param	array		Input data structure, possibly with a sheet-definition and references to external data source files.
	 * @return	array		Output data structure with all sheets resolved as arrays.
	 */
	public static function resolveAllSheetsInDS(array $dataStructArray) {
		if (is_array($dataStructArray['sheets'])) {
			$out = array('sheets' => array());
			foreach ($dataStructArray['sheets'] as $sheetId => $sDat) {
				list($ds, $aS) = self::resolveSheetDefInDS($dataStructArray, $sheetId);
				if ($sheetId == $aS) {
					$out['sheets'][$aS] = $ds;
				}
			}
		} else {
			list($ds) = self::resolveSheetDefInDS($dataStructArray);
			$out = array('sheets' => array('sDEF' => $ds));
		}
		return $out;
	}

	/**
	 * Calls a userdefined function/method in class
	 * Such a function/method should look like this: "function proc(&$params, &$ref)	{...}"
	 * Usage: 17
	 *
	 * @param	string		Function/Method reference, '[file-reference":"]["&"]class/function["->"method-name]'. You can prefix this reference with "[file-reference]:" and t3lib_div::getFileAbsFileName() will then be used to resolve the filename and subsequently include it by "require_once()" which means you don't have to worry about including the class file either! Example: "EXT:realurl/class.tx_realurl.php:&tx_realurl->encodeSpURL". Finally; you can prefix the class name with "&" if you want to reuse a former instance of the same object call ("singleton").
	 * @param	mixed		Parameters to be pass along (typically an array) (REFERENCE!)
	 * @param	mixed		Reference to be passed along (typically "$this" - being a reference to the calling object) (REFERENCE!)
	 * @param	string		Required prefix of class or function name
	 * @param	integer		Error mode (when class/function could not be found): 0 - call debug(), 1 - do nothing, 2 - raise an exception (allows to call a user function that may return FALSE)
	 * @return	mixed		Content from method/function call or false if the class/method/function was not found
	 * @see getUserObj()
	 */
	public static function callUserFunction($funcName, &$params, &$ref, $checkPrefix = 'user_', $errorMode = 0) {
		global $TYPO3_CONF_VARS;
		$content = FALSE;

			// Check persistent object and if found, call directly and exit.
		if (is_array($GLOBALS['T3_VAR']['callUserFunction'][$funcName])) {
			return call_user_func_array(
				array(&$GLOBALS['T3_VAR']['callUserFunction'][$funcName]['obj'],
					$GLOBALS['T3_VAR']['callUserFunction'][$funcName]['method']),
				array(&$params, &$ref)
			);
		}

			// Check file-reference prefix; if found, require_once() the file (should be library of code)
		if (strpos($funcName, ':') !== FALSE) {
			list($file, $funcRef) = self::revExplode(':', $funcName, 2);
			$requireFile = self::getFileAbsFileName($file);
			if ($requireFile) {
				self::requireOnce($requireFile);
			}
		} else {
			$funcRef = $funcName;
		}

			// Check for persistent object token, "&"
		if (substr($funcRef, 0, 1) == '&') {
			$funcRef = substr($funcRef, 1);
			$storePersistentObject = TRUE;
		} else {
			$storePersistentObject = FALSE;
		}

			// Check prefix is valid:
		if ($checkPrefix && !self::hasValidClassPrefix($funcRef, array($checkPrefix))) {
			$errorMsg = "Function/class '$funcRef' was not prepended with '$checkPrefix'";
			if ($errorMode == 2) {
				throw new Exception($errorMsg);
			} elseif (!$errorMode) {
				debug($errorMsg, 't3lib_div::callUserFunction');
			}
			return FALSE;
		}

			// Call function or method:
		$parts = explode('->', $funcRef);
		if (count($parts) == 2) { // Class

				// Check if class/method exists:
			if (class_exists($parts[0])) {

					// Get/Create object of class:
				if ($storePersistentObject) { // Get reference to current instance of class:
					if (!is_object($GLOBALS['T3_VAR']['callUserFunction_classPool'][$parts[0]])) {
						$GLOBALS['T3_VAR']['callUserFunction_classPool'][$parts[0]] = self::makeInstance($parts[0]);
					}
					$classObj = $GLOBALS['T3_VAR']['callUserFunction_classPool'][$parts[0]];
				} else { // Create new object:
					$classObj = self::makeInstance($parts[0]);
				}

				if (method_exists($classObj, $parts[1])) {

						// If persistent object should be created, set reference:
					if ($storePersistentObject) {
						$GLOBALS['T3_VAR']['callUserFunction'][$funcName] = array(
							'method' => $parts[1],
							'obj' => &$classObj
						);
					}
						// Call method:
					$content = call_user_func_array(
						array(&$classObj, $parts[1]),
						array(&$params, &$ref)
					);
				} else {
					$errorMsg = "<strong>ERROR:</strong> No method name '" . $parts[1] . "' in class " . $parts[0];
					if ($errorMode == 2) {
						throw new Exception($errorMsg);
					} elseif (!$errorMode) {
						debug($errorMsg, 't3lib_div::callUserFunction');
					}
				}
			} else {
				$errorMsg = "<strong>ERROR:</strong> No class named: " . $parts[0];
				if ($errorMode == 2) {
					throw new Exception($errorMsg);
				} elseif (!$errorMode) {
					debug($errorMsg, 't3lib_div::callUserFunction');
				}
			}
		} else { // Function
			if (function_exists($funcRef)) {
				$content = call_user_func_array($funcRef, array(&$params, &$ref));
			} else {
				$errorMsg = "<strong>ERROR:</strong> No function named: " . $funcRef;
				if ($errorMode == 2) {
					throw new Exception($errorMsg);
				} elseif (!$errorMode) {
					debug($errorMsg, 't3lib_div::callUserFunction');
				}
			}
		}
		return $content;
	}

	/**
	 * Creates and returns reference to a user defined object.
	 * This function can return an object reference if you like. Just prefix the function call with "&": "$objRef = &t3lib_div::getUserObj('EXT:myext/class.tx_myext_myclass.php:&tx_myext_myclass');". This will work ONLY if you prefix the class name with "&" as well. See description of function arguments.
	 * Usage: 5
	 *
	 * @param	string		Class reference, '[file-reference":"]["&"]class-name'. You can prefix the class name with "[file-reference]:" and t3lib_div::getFileAbsFileName() will then be used to resolve the filename and subsequently include it by "require_once()" which means you don't have to worry about including the class file either! Example: "EXT:realurl/class.tx_realurl.php:&tx_realurl". Finally; for the class name you can prefix it with "&" and you will reuse the previous instance of the object identified by the full reference string (meaning; if you ask for the same $classRef later in another place in the code you will get a reference to the first created one!).
	 * @param	string		Required prefix of class name. By default "tx_" and "Tx_" are allowed.
	 * @param	boolean		If set, no debug() error message is shown if class/function is not present.
	 * @return	object		The instance of the class asked for. Instance is created with t3lib_div::makeInstance
	 * @see callUserFunction()
	 */
	public static function getUserObj($classRef, $checkPrefix = 'user_', $silent = FALSE) {
		global $TYPO3_CONF_VARS;
			// Check persistent object and if found, call directly and exit.
		if (is_object($GLOBALS['T3_VAR']['getUserObj'][$classRef])) {
			return $GLOBALS['T3_VAR']['getUserObj'][$classRef];
		} else {

				// Check file-reference prefix; if found, require_once() the file (should be library of code)
			if (strpos($classRef, ':') !== FALSE) {
				list($file, $class) = self::revExplode(':', $classRef, 2);
				$requireFile = self::getFileAbsFileName($file);
				if ($requireFile) {
					self::requireOnce($requireFile);
				}
			} else {
				$class = $classRef;
			}

				// Check for persistent object token, "&"
			if (substr($class, 0, 1) == '&') {
				$class = substr($class, 1);
				$storePersistentObject = TRUE;
			} else {
				$storePersistentObject = FALSE;
			}

				// Check prefix is valid:
			if ($checkPrefix && !self::hasValidClassPrefix($class, array($checkPrefix))) {
				if (!$silent) {
					debug("Class '" . $class . "' was not prepended with '" . $checkPrefix . "'", 't3lib_div::getUserObj');
				}
				return FALSE;
			}

				// Check if class exists:
			if (class_exists($class)) {
				$classObj = self::makeInstance($class);

					// If persistent object should be created, set reference:
				if ($storePersistentObject) {
					$GLOBALS['T3_VAR']['getUserObj'][$classRef] = $classObj;
				}

				return $classObj;
			} else {
				if (!$silent) {
					debug("<strong>ERROR:</strong> No class named: " . $class, 't3lib_div::getUserObj');
				}
			}
		}
	}

	/**
	 * Checks if a class or function has a valid prefix: tx_, Tx_ or custom, e.g. user_
	 *
	 * @param string $classRef The class or function to check
	 * @param array $additionalPrefixes Additional allowed prefixes, mostly this will be user_
	 * @return bool TRUE if name is allowed
	 */
	public static function hasValidClassPrefix($classRef, array $additionalPrefixes = array()) {
		$hasValidPrefix = FALSE;
		$validPrefixes = array('tx_', 'Tx_', $GLOBALS['TYPO3_CONF_VARS']['FE']['userFuncClassPrefix']);
		$classRef = trim($classRef);

		if (count($additionalPrefixes)) {
			$validPrefixes = array_merge($validPrefixes, $additionalPrefixes);
		}

		foreach ($validPrefixes as $prefixToCheck) {
			if (self::isFirstPartOfStr($classRef, $prefixToCheck)) {
				$hasValidPrefix = TRUE;
				break;
			}
		}

		return $hasValidPrefix;
	}

	/**
	 * Creates an instance of a class taking into account the class-extensions
	 * API of TYPO3. USE THIS method instead of the PHP "new" keyword.
	 * Eg. "$obj = new myclass;" should be "$obj = t3lib_div::makeInstance("myclass")" instead!
	 *
	 * You can also pass arguments for a constructor:
	 * 		t3lib_div::makeInstance('myClass', $arg1, $arg2,  ..., $argN)
	 *
	 * @throws	InvalidArgumentException if classname is an empty string
	 * @param	string		$className
	 * 			name of the class to instantiate, must not be empty
	 * @return	object		the created instance
	 */
	public static function makeInstance($className) {
		if ($className === '') {
			throw new InvalidArgumentException('$classname must not be empty.', 1288965219);
		}

			// Determine final class name which must be instantiated, this takes XCLASS handling
			// into account. Cache in a local array to save some cycles for consecutive calls.
		if (!isset(self::$finalClassNameRegister[$className])) {
			self::$finalClassNameRegister[$className] = self::getClassName($className);
		}
		$finalClassName = self::$finalClassNameRegister[$className];

			// Return singleton instance if it is already registered
		if (isset(self::$singletonInstances[$finalClassName])) {
			return self::$singletonInstances[$finalClassName];
		}

			// Return instance if it has been injected by addInstance()
		if (isset(self::$nonSingletonInstances[$finalClassName])
			&& !empty(self::$nonSingletonInstances[$finalClassName])
		) {
			return array_shift(self::$nonSingletonInstances[$finalClassName]);
		}

			// Create new instance and call constructor with parameters
		if (func_num_args() > 1) {
			$constructorArguments = func_get_args();
			array_shift($constructorArguments);

			$reflectedClass = new ReflectionClass($finalClassName);
			$instance = $reflectedClass->newInstanceArgs($constructorArguments);
		} else {
			$instance = new $finalClassName;
		}

			// Register new singleton instance
		if ($instance instanceof t3lib_Singleton) {
			self::$singletonInstances[$finalClassName] = $instance;
		}

		return $instance;
	}

	/**
	 * Return classname for new instance
	 * Takes the class-extensions API of TYPO3 into account
	 * Usage: 17
	 *
	 * @param	string		Base Class name to evaluate
	 * @return	string		Final class name to instantiate with "new [classname]"
	 * @deprecated since TYPO3 4.3, will be removed in TYPO3 4.6 - Use t3lib_div::makeInstance('myClass', $arg1, $arg2,  ..., $argN)
	 */
	public static function makeInstanceClassName($className) {
		self::logDeprecatedFunction();

		return (class_exists($className) && class_exists('ux_' . $className, FALSE) ? self::makeInstanceClassName('ux_' . $className) : $className);
	}

	/**
	 * Returns the class name for a new instance, taking into account the
	 * class-extension API.
	 *
	 * @param	string		Base class name to evaluate
	 * @return	string		Final class name to instantiate with "new [classname]"
	 */
	protected function getClassName($className) {
		if (class_exists($className)) {
			while (class_exists('ux_' . $className, FALSE)) {
				$className = 'ux_' . $className;
			}
		}

		return $className;
	}

	/**
	 * Sets the instance of a singleton class to be returned by makeInstance.
	 *
	 * If this function is called multiple times for the same $className,
	 * makeInstance will return the last set instance.
	 *
	 * Warning: This is a helper method for unit tests. Do not call this directly in production code!
	 *
	 * @see makeInstance
	 * @param string $className
	 *        the name of the class to set, must not be empty
	 * @param t3lib_Singleton $instance
	 *        the instance to set, must be an instance of $className
	 * @return void
	 */
	public static function setSingletonInstance($className, t3lib_Singleton $instance) {
		self::checkInstanceClassName($className, $instance);
		self::$singletonInstances[$className] = $instance;
	}

	/**
	 * Sets the instance of a non-singleton class to be returned by makeInstance.
	 *
	 * If this function is called multiple times for the same $className,
	 * makeInstance will return the instances in the order in which they have
	 * been added (FIFO).
	 *
	 * Warning: This is a helper method for unit tests. Do not call this directly in production code!
	 *
	 * @see makeInstance
	 * @throws InvalidArgumentException if class extends t3lib_Singleton
	 * @param string $className
	 *        the name of the class to set, must not be empty
	 * @param object $instance
	 *        the instance to set, must be an instance of $className
	 * @return void
	 */
	public static function addInstance($className, $instance) {
		self::checkInstanceClassName($className, $instance);

		if ($instance instanceof t3lib_Singleton) {
			throw new InvalidArgumentException(
				'$instance must not be an instance of t3lib_Singleton. ' .
					'For setting singletons, please use setSingletonInstance.',
				1288969325
			);
		}

		if (!isset(self::$nonSingletonInstances[$className])) {
			self::$nonSingletonInstances[$className] = array();
		}
		self::$nonSingletonInstances[$className][] = $instance;
	}

	/**
	 * Checks that $className is non-empty and that $instance is an instance of
	 * $className.
	 *
	 * @throws InvalidArgumentException if $className is empty or if $instance is no instance of $className
	 * @param string $className a class name
	 * @param object $instance an object
	 * @return void
	 */
	protected static function checkInstanceClassName($className, $instance) {
		if ($className === '') {
			throw new InvalidArgumentException('$className must not be empty.', 1288967479);
		}
		if (!($instance instanceof $className)) {
			throw new InvalidArgumentException(
				'$instance must be an instance of ' . $className . ', but actually is an instance of ' . get_class($instance) . '.',
				1288967686
			);
		}
	}

	/**
	 * Purge all instances returned by makeInstance.
	 *
	 * This function is most useful when called from tearDown in a testcase
	 * to drop any instances that have been created by the tests.
	 *
	 * Warning: This is a helper method for unit tests. Do not call this directly in production code!
	 *
	 * @see makeInstance
	 * @return void
	 */
	public static function purgeInstances() {
		self::$singletonInstances = array();
		self::$nonSingletonInstances = array();
	}

	/**
	 * Find the best service and check if it works.
	 * Returns object of the service class.
	 *
	 * @param	string		Type of service (service key).
	 * @param	string		Sub type like file extensions or similar. Defined by the service.
	 * @param	mixed		List of service keys which should be exluded in the search for a service. Array or comma list.
	 * @return	object		The service object or an array with error info's.
	 * @author	René Fritz <r.fritz@colorcube.de>
	 */
	public static function makeInstanceService($serviceType, $serviceSubType = '', $excludeServiceKeys = array()) {
		global $T3_SERVICES, $T3_VAR, $TYPO3_CONF_VARS;

		$error = FALSE;

		if (!is_array($excludeServiceKeys)) {
			$excludeServiceKeys = self::trimExplode(',', $excludeServiceKeys, 1);
		}
		while ($info = t3lib_extMgm::findService($serviceType, $serviceSubType, $excludeServiceKeys)) {

				// Check persistent object and if found, call directly and exit.
			if (is_object($GLOBALS['T3_VAR']['makeInstanceService'][$info['className']])) {
					// reset service and return object
				$T3_VAR['makeInstanceService'][$info['className']]->reset();
				return $GLOBALS['T3_VAR']['makeInstanceService'][$info['className']];

				// include file and create object
			} else {
				$requireFile = self::getFileAbsFileName($info['classFile']);
				if (@is_file($requireFile)) {
					self::requireOnce($requireFile);
					$obj = self::makeInstance($info['className']);
					if (is_object($obj)) {
						if (!@is_callable(array($obj, 'init'))) {
								// use silent logging??? I don't think so.
							die ('Broken service:' . t3lib_utility_Debug::viewArray($info));
						}
						$obj->info = $info;
						if ($obj->init()) { // service available?

								// create persistent object
							$T3_VAR['makeInstanceService'][$info['className']] = $obj;

								// needed to delete temp files
							register_shutdown_function(array(&$obj, '__destruct'));

							return $obj; // object is passed as reference by function definition
						}
						$error = $obj->getLastErrorArray();
						unset($obj);
					}
				}
			}
				// deactivate the service
			t3lib_extMgm::deactivateService($info['serviceType'], $info['serviceKey']);
		}
		return $error;
	}

	/**
	 * Require a class for TYPO3
	 * Useful to require classes from inside other classes (not global scope). A limited set of global variables are available (see function)
	 */
	public static function requireOnce($requireFile) {
		global $T3_SERVICES, $T3_VAR, $TYPO3_CONF_VARS;

		require_once ($requireFile);
	}

	/**
	 * Requires a class for TYPO3
	 * Useful to require classes from inside other classes (not global scope).
	 * A limited set of global variables are available (see function)
	 *
	 * @param	string		$requireFile: Path of the file to be included
	 * @return	void
	 */
	public static function requireFile($requireFile) {
		global $T3_SERVICES, $T3_VAR, $TYPO3_CONF_VARS;
		require $requireFile;
	}

	/**
	 * Simple substitute for the PHP function mail() which allows you to specify encoding and character set
	 * The fifth parameter ($encoding) will allow you to specify 'base64' encryption for the output (set $encoding=base64)
	 * Further the output has the charset set to ISO-8859-1 by default.
	 * Usage: 4
	 *
	 * @param	string		Email address to send to. (see PHP function mail())
	 * @param	string		Subject line, non-encoded. (see PHP function mail())
	 * @param	string		Message content, non-encoded. (see PHP function mail())
	 * @param	string		Headers, separated by LF
	 * @param	string		Encoding type: "base64", "quoted-printable", "8bit". Default value is "quoted-printable".
	 * @param	string		Charset used in encoding-headers (only if $encoding is set to a valid value which produces such a header)
	 * @param	boolean		If set, the header content will not be encoded.
	 * @return	boolean		True if mail was accepted for delivery, false otherwise
	 */
	public static function plainMailEncoded($email, $subject, $message, $headers = '', $encoding = 'quoted-printable', $charset = '', $dontEncodeHeader = FALSE) {
		if (!$charset) {
			$charset = $GLOBALS['TYPO3_CONF_VARS']['BE']['forceCharset'] ? $GLOBALS['TYPO3_CONF_VARS']['BE']['forceCharset'] : 'ISO-8859-1';
		}

		$email = self::normalizeMailAddress($email);
		if (!$dontEncodeHeader) {
				// Mail headers must be ASCII, therefore we convert the whole header to either base64 or quoted_printable
			$newHeaders = array();
			foreach (explode(LF, $headers) as $line) { // Split the header in lines and convert each line separately
				$parts = explode(': ', $line, 2); // Field tags must not be encoded
				if (count($parts) == 2) {
					if (0 == strcasecmp($parts[0], 'from')) {
						$parts[1] = self::normalizeMailAddress($parts[1]);
					}
					$parts[1] = self::encodeHeader($parts[1], $encoding, $charset);
					$newHeaders[] = implode(': ', $parts);
				} else {
					$newHeaders[] = $line; // Should never happen - is such a mail header valid? Anyway, just add the unchanged line...
				}
			}
			$headers = implode(LF, $newHeaders);
			unset($newHeaders);

			$email = self::encodeHeader($email, $encoding, $charset); // Email address must not be encoded, but it could be appended by a name which should be so (e.g. "Kasper Skårhøj <kasperYYYY@typo3.com>")
			$subject = self::encodeHeader($subject, $encoding, $charset);
		}

		switch ((string) $encoding) {
			case 'base64':
				$headers = trim($headers) . LF .
						'Mime-Version: 1.0' . LF .
						'Content-Type: text/plain; charset="' . $charset . '"' . LF .
						'Content-Transfer-Encoding: base64';

				$message = trim(chunk_split(base64_encode($message . LF))) . LF; // Adding LF because I think MS outlook 2002 wants it... may be removed later again.
				break;
			case '8bit':
				$headers = trim($headers) . LF .
						'Mime-Version: 1.0' . LF .
						'Content-Type: text/plain; charset=' . $charset . LF .
						'Content-Transfer-Encoding: 8bit';
				break;
			case 'quoted-printable':
			default:
				$headers = trim($headers) . LF .
						'Mime-Version: 1.0' . LF .
						'Content-Type: text/plain; charset=' . $charset . LF .
						'Content-Transfer-Encoding: quoted-printable';

				$message = self::quoted_printable($message);
				break;
		}

			// Headers must be separated by CRLF according to RFC 2822, not just LF.
			// But many servers (Gmail, for example) behave incorectly and want only LF.
			// So we stick to LF in all cases.
		$headers = trim(implode(LF, self::trimExplode(LF, $headers, TRUE))); // Make sure no empty lines are there.


		return t3lib_utility_Mail::mail($email, $subject, $message, $headers);
	}

	/**
	 * Implementation of quoted-printable encode.
	 * This functions is buggy. It seems that in the part where the lines are breaked every 76th character, that it fails if the break happens right in a quoted_printable encode character!
	 * See RFC 1521, section 5.1 Quoted-Printable Content-Transfer-Encoding
	 * Usage: 2
	 *
	 * @param	string		Content to encode
	 * @param	integer		Length of the lines, default is 76
	 * @return	string		The QP encoded string
	 */
	public static function quoted_printable($string, $maxlen = 76) {
			// Make sure the string contains only Unix linebreaks
		$string = str_replace(CRLF, LF, $string); // Replace Windows breaks (\r\n)
		$string = str_replace(CR, LF, $string); // Replace Mac breaks (\r)

		$linebreak = LF; // Default line break for Unix systems.
		if (TYPO3_OS == 'WIN') {
			$linebreak = CRLF; // Line break for Windows. This is needed because PHP on Windows systems send mails via SMTP instead of using sendmail, and thus the linebreak needs to be \r\n.
		}

		$newString = '';
		$theLines = explode(LF, $string); // Split lines
		foreach ($theLines as $val) {
			$newVal = '';
			$theValLen = strlen($val);
			$len = 0;
			for ($index = 0; $index < $theValLen; $index++) { // Walk through each character of this line
				$char = substr($val, $index, 1);
				$ordVal = ord($char);
				if ($len > ($maxlen - 4) || ($len > ($maxlen - 14) && $ordVal == 32)) {
					$newVal .= '=' . $linebreak; // Add a line break
					$len = 0; // Reset the length counter
				}
				if (($ordVal >= 33 && $ordVal <= 60) || ($ordVal >= 62 && $ordVal <= 126) || $ordVal == 9 || $ordVal == 32) {
					$newVal .= $char; // This character is ok, add it to the message
					$len++;
				} else {
					$newVal .= sprintf('=%02X', $ordVal); // Special character, needs to be encoded
					$len += 3;
				}
			}
			$newVal = preg_replace('/' . chr(32) . '$/', '=20', $newVal); // Replaces a possible SPACE-character at the end of a line
			$newVal = preg_replace('/' . TAB . '$/', '=09', $newVal); // Replaces a possible TAB-character at the end of a line
			$newString .= $newVal . $linebreak;
		}
		return preg_replace('/' . $linebreak . '$/', '', $newString); // Remove last newline
	}

	/**
	 * Encode header lines
	 * Email headers must be ASCII, therefore they will be encoded to quoted_printable (default) or base64.
	 *
	 * @param	string		Content to encode
	 * @param	string		Encoding type: "base64" or "quoted-printable". Default value is "quoted-printable".
	 * @param	string		Charset used for encoding
	 * @return	string		The encoded string
	 */
	public static function encodeHeader($line, $enc = 'quoted-printable', $charset = 'iso-8859-1') {
			// Avoid problems if "###" is found in $line (would conflict with the placeholder which is used below)
		if (strpos($line, '###') !== FALSE) {
			return $line;
		}
			// Check if any non-ASCII characters are found - otherwise encoding is not needed
		if (!preg_match('/[^' . chr(32) . '-' . chr(127) . ']/', $line)) {
			return $line;
		}
			// Wrap email addresses in a special marker
		$line = preg_replace('/([^ ]+@[^ ]+)/', '###$1###', $line);

		$matches = preg_split('/(.?###.+###.?|\(|\))/', $line, -1, PREG_SPLIT_NO_EMPTY);
		foreach ($matches as $part) {
			$oldPart = $part;
			switch ((string) $enc) {
				case 'base64':
					$part = '=?' . $charset . '?B?' . base64_encode($part) . '?=';
					break;
				case 'quoted-printable':
				default:
					$qpValue = self::quoted_printable($part, 1000);
					if ($part != $qpValue) {
							// Encoded words in the header should not contain non-encoded:
							// * spaces. "_" is a shortcut for "=20". See RFC 2047 for details.
							// * question mark. See RFC 1342 (http://tools.ietf.org/html/rfc1342)
						$search = array(' ', '?');
						$replace = array('_', '=3F');
						$qpValue = str_replace($search, $replace, $qpValue);
						$part = '=?' . $charset . '?Q?' . $qpValue . '?=';
					}
					break;
			}
			$line = str_replace($oldPart, $part, $line);
		}
		$line = preg_replace('/###(.+?)###/', '$1', $line); // Remove the wrappers

		return $line;
	}

	/**
	 * Takes a clear-text message body for a plain text email, finds all 'http://' links and if they are longer than 76 chars they are converted to a shorter URL with a hash parameter. The real parameter is stored in the database and the hash-parameter/URL will be redirected to the real parameter when the link is clicked.
	 * This function is about preserving long links in messages.
	 * Usage: 3
	 *
	 * @param	string		Message content
	 * @param	string		URL mode; "76" or "all"
	 * @param	string		URL of index script (see makeRedirectUrl())
	 * @return	string		Processed message content
	 * @see makeRedirectUrl()
	 */
	public static function substUrlsInPlainText($message, $urlmode = '76', $index_script_url = '') {
			// Substitute URLs with shorter links:
		foreach (array('http', 'https') as $protocol) {
			$urlSplit = explode($protocol . '://', $message);
			foreach ($urlSplit as $c => &$v) {
				if ($c) {
					$newParts = preg_split('/\s|[<>"{}|\\\^`()\']/', $v, 2);
					$newURL = $protocol . '://' . $newParts[0];

					switch ((string) $urlmode) {
						case 'all':
							$newURL = self::makeRedirectUrl($newURL, 0, $index_script_url);
							break;
						case '76':
							$newURL = self::makeRedirectUrl($newURL, 76, $index_script_url);
							break;
					}
					$v = $newURL . substr($v, strlen($newParts[0]));
				}
			}
			$message = implode('', $urlSplit);
		}

		return $message;
	}

	/**
	 * Subfunction for substUrlsInPlainText() above.
	 * Usage: 2
	 *
	 * @param	string		Input URL
	 * @param	integer		URL string length limit
	 * @param	string		URL of "index script" - the prefix of the "?RDCT=..." parameter. If not supplyed it will default to t3lib_div::getIndpEnv('TYPO3_REQUEST_DIR').'index.php'
	 * @return	string		Processed URL
	 */
	public static function makeRedirectUrl($inUrl, $l = 0, $index_script_url = '') {
		if (strlen($inUrl) > $l) {
			$md5 = substr(md5($inUrl), 0, 20);
			$count = $GLOBALS['TYPO3_DB']->exec_SELECTcountRows(
				'*',
				'cache_md5params',
					'md5hash=' . $GLOBALS['TYPO3_DB']->fullQuoteStr($md5, 'cache_md5params')
			);
			if (!$count) {
				$insertFields = array(
					'md5hash' => $md5,
					'tstamp' => $GLOBALS['EXEC_TIME'],
					'type' => 2,
					'params' => $inUrl
				);

				$GLOBALS['TYPO3_DB']->exec_INSERTquery('cache_md5params', $insertFields);
			}
			$inUrl = ($index_script_url ? $index_script_url : self::getIndpEnv('TYPO3_REQUEST_DIR') . 'index.php') .
					'?RDCT=' . $md5;
		}

		return $inUrl;
	}

	/**
	 * Function to compensate for FreeType2 96 dpi
	 * Usage: 21
	 *
	 * @param	integer		Fontsize for freetype function call
	 * @return	integer		Compensated fontsize based on $GLOBALS['TYPO3_CONF_VARS']['GFX']['TTFdpi']
	 */
	public static function freetypeDpiComp($font_size) {
		$dpi = intval($GLOBALS['TYPO3_CONF_VARS']['GFX']['TTFdpi']);
		if ($dpi != 72) {
			$font_size = $font_size / $dpi * 72;
		}
		return $font_size;
	}

	/**
	 * Initialize the system log.
	 *
	 * @return	void
	 * @see sysLog()
	 */
	public static function initSysLog() {
		global $TYPO3_CONF_VARS;

			// for CLI logging name is <fqdn-hostname>:<TYPO3-path>
			// Note that TYPO3_REQUESTTYPE is not used here as it may not yet be defined
		if (defined('TYPO3_cliMode') && TYPO3_cliMode) {
			$TYPO3_CONF_VARS['SC_OPTIONS']['t3lib/class.t3lib_div.php']['systemLogHost'] = self::getHostname($requestHost = FALSE) . ':' . PATH_site;
		}
			// for Web logging name is <protocol>://<request-hostame>/<site-path>
		else {
			$TYPO3_CONF_VARS['SC_OPTIONS']['t3lib/class.t3lib_div.php']['systemLogHost'] = self::getIndpEnv('TYPO3_SITE_URL');
		}

			// init custom logging
		if (is_array($TYPO3_CONF_VARS['SC_OPTIONS']['t3lib/class.t3lib_div.php']['systemLog'])) {
			$params = array('initLog' => TRUE);
			$fakeThis = FALSE;
			foreach ($TYPO3_CONF_VARS['SC_OPTIONS']['t3lib/class.t3lib_div.php']['systemLog'] as $hookMethod) {
				self::callUserFunction($hookMethod, $params, $fakeThis);
			}
		}

			// init TYPO3 logging
		foreach (explode(';', $TYPO3_CONF_VARS['SYS']['systemLog'], 2) as $log) {
			list($type, $destination) = explode(',', $log, 3);

			if ($type == 'syslog') {
				if (TYPO3_OS == 'WIN') {
					$facility = LOG_USER;
				} else {
					$facility = constant('LOG_' . strtoupper($destination));
				}
				openlog($TYPO3_CONF_VARS['SC_OPTIONS']['t3lib/class.t3lib_div.php']['systemLogHost'], LOG_ODELAY, $facility);
			}
		}

		$TYPO3_CONF_VARS['SYS']['systemLogLevel'] = self::intInRange($TYPO3_CONF_VARS['SYS']['systemLogLevel'], 0, 4);
		$TYPO3_CONF_VARS['SC_OPTIONS']['t3lib/class.t3lib_div.php']['systemLogInit'] = TRUE;
	}

	/**
	 * Logs message to the system log.
	 * This should be implemented around the source code, including the Core and both frontend and backend, logging serious errors.
	 * If you want to implement the sysLog in your applications, simply add lines like:
	 *		 t3lib_div::sysLog('[write message in English here]', 'extension_key', 'severity');
	 *
	 * @param	string		Message (in English).
	 * @param	string		Extension key (from which extension you are calling the log) or "Core"
	 * @param	integer		Severity: 0 is info, 1 is notice, 2 is warning, 3 is error, 4 is fatal error
	 * @return	void
	 */
	public static function sysLog($msg, $extKey, $severity = 0) {
		global $TYPO3_CONF_VARS;

		$severity = self::intInRange($severity, 0, 4);

			// is message worth logging?
		if (intval($TYPO3_CONF_VARS['SYS']['systemLogLevel']) > $severity) {
			return;
		}

			// initialize logging
		if (!$TYPO3_CONF_VARS['SC_OPTIONS']['t3lib/class.t3lib_div.php']['systemLogInit']) {
			self::initSysLog();
		}

			// do custom logging
		if (isset($TYPO3_CONF_VARS['SC_OPTIONS']['t3lib/class.t3lib_div.php']['systemLog']) &&
				is_array($TYPO3_CONF_VARS['SC_OPTIONS']['t3lib/class.t3lib_div.php']['systemLog'])) {
			$params = array('msg' => $msg, 'extKey' => $extKey, 'backTrace' => debug_backtrace(), 'severity' => $severity);
			$fakeThis = FALSE;
			foreach ($TYPO3_CONF_VARS['SC_OPTIONS']['t3lib/class.t3lib_div.php']['systemLog'] as $hookMethod) {
				self::callUserFunction($hookMethod, $params, $fakeThis);
			}
		}

			// TYPO3 logging enabled?
		if (!$TYPO3_CONF_VARS['SYS']['systemLog']) {
			return;
		}

		$dateFormat = $GLOBALS['TYPO3_CONF_VARS']['SYS']['ddmmyy'];
		$timeFormat = $GLOBALS['TYPO3_CONF_VARS']['SYS']['hhmm'];

			// use all configured logging options
		foreach (explode(';', $TYPO3_CONF_VARS['SYS']['systemLog'], 2) as $log) {
			list($type, $destination, $level) = explode(',', $log, 4);

				// is message worth logging for this log type?
			if (intval($level) > $severity) {
				continue;
			}

			$msgLine = ' - ' . $extKey . ': ' . $msg;

				// write message to a file
			if ($type == 'file') {
				$file = fopen($destination, 'a');
				if ($file) {
					flock($file, LOCK_EX); // try locking, but ignore if not available (eg. on NFS and FAT)
					fwrite($file, date($dateFormat . ' ' . $timeFormat) . $msgLine . LF);
					flock($file, LOCK_UN); // release the lock
					fclose($file);
					self::fixPermissions($destination);
				}
			}
				// send message per mail
			elseif ($type == 'mail') {
				list($to, $from) = explode('/', $destination);
				if (!t3lib_div::validEmail($from)) {
					$from = t3lib_utility_Mail::getSystemFrom();
				}
				/** @var $mail t3lib_mail_Message */
				$mail = t3lib_div::makeInstance('t3lib_mail_Message');
				$mail->setTo($to)
						->setFrom($from)
						->setSubject('Warning - error in TYPO3 installation')
						->setBody('Host: ' . $TYPO3_CONF_VARS['SC_OPTIONS']['t3lib/class.t3lib_div.php']['systemLogHost'] . LF .
								'Extension: ' . $extKey . LF .
								'Severity: ' . $severity . LF .
								LF . $msg
				);
				$mail->send();
			}
				// use the PHP error log
			elseif ($type == 'error_log') {
				error_log($TYPO3_CONF_VARS['SC_OPTIONS']['t3lib/class.t3lib_div.php']['systemLogHost'] . $msgLine, 0);
			}
				// use the system log
			elseif ($type == 'syslog') {
				$priority = array(LOG_INFO, LOG_NOTICE, LOG_WARNING, LOG_ERR, LOG_CRIT);
				syslog($priority[(int) $severity], $msgLine);
			}
		}
	}

	/**
	 * Logs message to the development log.
	 * This should be implemented around the source code, both frontend and backend, logging everything from the flow through an application, messages, results from comparisons to fatal errors.
	 * The result is meant to make sense to developers during development or debugging of a site.
	 * The idea is that this function is only a wrapper for external extensions which can set a hook which will be allowed to handle the logging of the information to any format they might wish and with any kind of filter they would like.
	 * If you want to implement the devLog in your applications, simply add lines like:
	 *		 if (TYPO3_DLOG)	t3lib_div::devLog('[write message in english here]', 'extension key');
	 *
	 * @param	string		Message (in english).
	 * @param	string		Extension key (from which extension you are calling the log)
	 * @param	integer		Severity: 0 is info, 1 is notice, 2 is warning, 3 is fatal error, -1 is "OK" message
	 * @param	mixed		Additional data you want to pass to the logger.
	 * @return	void
	 */
	public static function devLog($msg, $extKey, $severity = 0, $dataVar = FALSE) {
		global $TYPO3_CONF_VARS;

		if (is_array($TYPO3_CONF_VARS['SC_OPTIONS']['t3lib/class.t3lib_div.php']['devLog'])) {
			$params = array('msg' => $msg, 'extKey' => $extKey, 'severity' => $severity, 'dataVar' => $dataVar);
			$fakeThis = FALSE;
			foreach ($TYPO3_CONF_VARS['SC_OPTIONS']['t3lib/class.t3lib_div.php']['devLog'] as $hookMethod) {
				self::callUserFunction($hookMethod, $params, $fakeThis);
			}
		}
	}

	/**
	 * Writes a message to the deprecation log.
	 *
	 * @param	string		Message (in English).
	 * @return	void
	 */
	public static function deprecationLog($msg) {
		if (!$GLOBALS['TYPO3_CONF_VARS']['SYS']['enableDeprecationLog']) {
			return;
		}

		$log = $GLOBALS['TYPO3_CONF_VARS']['SYS']['enableDeprecationLog'];
		$date = date($GLOBALS['TYPO3_CONF_VARS']['SYS']['ddmmyy'] . ' ' . $GLOBALS['TYPO3_CONF_VARS']['SYS']['hhmm'] . ': ');

			// legacy values (no strict comparison, $log can be boolean, string or int)
		if ($log === TRUE || $log == '1') {
			$log = 'file';
		}

		if (stripos($log, 'file') !== FALSE) {
				// write a longer message to the deprecation log
			$destination = self::getDeprecationLogFileName();
			$file = @fopen($destination, 'a');
			if ($file) {
				flock($file, LOCK_EX); // try locking, but ignore if not available (eg. on NFS and FAT)
				@fwrite($file, $date . $msg . LF);
				flock($file, LOCK_UN); // release the lock
				@fclose($file);
				self::fixPermissions($destination);
			}
		}

		if (stripos($log, 'devlog') !== FALSE) {
				// copy message also to the developer log
			self::devLog($msg, 'Core', self::SYSLOG_SEVERITY_WARNING);
		}

			// do not use console in login screen
		if (stripos($log, 'console') !== FALSE && isset($GLOBALS['BE_USER']->user['uid'])) {
			t3lib_utility_Debug::debug($msg, $date, 'Deprecation Log');
		}
	}

	/**
	 * Gets the absolute path to the deprecation log file.
	 *
	 * @return	string	absolute path to the deprecation log file
	 */
	public static function getDeprecationLogFileName() {
		return PATH_typo3conf .
				'deprecation_' .
				self::shortMD5(
					PATH_site . $GLOBALS['TYPO3_CONF_VARS']['SYS']['encryptionKey']
				) .
				'.log';
	}

	/**
	 * Logs a call to a deprecated function.
	 * The log message will be taken from the annotation.
	 * @return	void
	 */
	public static function logDeprecatedFunction() {
		if (!$GLOBALS['TYPO3_CONF_VARS']['SYS']['enableDeprecationLog']) {
			return;
		}

		$trail = debug_backtrace();

		if ($trail[1]['type']) {
			$function = new ReflectionMethod($trail[1]['class'], $trail[1]['function']);
		} else {
			$function = new ReflectionFunction($trail[1]['function']);
		}

		$msg = '';
		if (preg_match('/@deprecated\s+(.*)/', $function->getDocComment(), $match)) {
			$msg = $match[1];
		}

			// trigger PHP error with a short message: <function> is deprecated (called from <source>, defined in <source>)
		$errorMsg = 'Function ' . $trail[1]['function'];
		if ($trail[1]['class']) {
			$errorMsg .= ' of class ' . $trail[1]['class'];
		}
		$errorMsg .= ' is deprecated (called from ' . $trail[1]['file'] . '#' . $trail[1]['line'] . ', defined in ' . $function->getFileName() . '#' . $function->getStartLine() . ')';

			// write a longer message to the deprecation log: <function> <annotion> - <trace> (<source>)
		$logMsg = $trail[1]['class'] . $trail[1]['type'] . $trail[1]['function'];
		$logMsg .= '() - ' . $msg.' - ' . t3lib_utility_Debug::debugTrail();
		$logMsg .= ' (' . substr($function->getFileName(), strlen(PATH_site)) . '#' . $function->getStartLine() . ')';
		self::deprecationLog($logMsg);
	}

	/**
	 * Converts a one dimensional array to a one line string which can be used for logging or debugging output
	 * Example: "loginType: FE; refInfo: Array; HTTP_HOST: www.example.org; REMOTE_ADDR: 192.168.1.5; REMOTE_HOST:; security_level:; showHiddenRecords: 0;"
	 *
	 * @param	array		Data array which should be outputted
	 * @param	mixed		List of keys which should be listed in the output string. Pass a comma list or an array. An empty list outputs the whole array.
	 * @param	integer		Long string values are shortened to this length. Default: 20
	 * @return	string		Output string with key names and their value as string
	 */
	public static function arrayToLogString(array $arr, $valueList = array(), $valueLength = 20) {
		$str = '';
		if (!is_array($valueList)) {
			$valueList = self::trimExplode(',', $valueList, 1);
		}
		$valListCnt = count($valueList);
		foreach ($arr as $key => $value) {
			if (!$valListCnt || in_array($key, $valueList)) {
				$str .= (string) $key . trim(': ' . self::fixed_lgd_cs(str_replace(LF, '|', (string) $value), $valueLength)) . '; ';
			}
		}
		return $str;
	}

	/**
	 * Compile the command for running ImageMagick/GraphicsMagick.
	 *
	 * @param	string		Command to be run: identify, convert or combine/composite
	 * @param	string		The parameters string
	 * @param	string		Override the default path (e.g. used by the install tool)
	 * @return	string		Compiled command that deals with IM6 & GraphicsMagick
	 */
	public static function imageMagickCommand($command, $parameters, $path = '') {
		return t3lib_utility_Command::imageMagickCommand($command, $parameters, $path);
	}

	/**
	 * Explode a string (normally a list of filenames) with whitespaces by considering quotes in that string. This is mostly needed by the imageMagickCommand function above.
	 *
	 * @param	string		The whole parameters string
	 * @param	boolean		If set, the elements of the resulting array are unquoted.
	 * @return	array		Exploded parameters
	 */
	public static function unQuoteFilenames($parameters, $unQuote = FALSE) {
		$paramsArr = explode(' ', trim($parameters));

		$quoteActive = -1; // Whenever a quote character (") is found, $quoteActive is set to the element number inside of $params. A value of -1 means that there are not open quotes at the current position.
		foreach ($paramsArr as $k => $v) {
			if ($quoteActive > -1) {
				$paramsArr[$quoteActive] .= ' ' . $v;
				unset($paramsArr[$k]);
				if (substr($v, -1) === $paramsArr[$quoteActive][0]) {
					$quoteActive = -1;
				}
			} elseif (!trim($v)) {
				unset($paramsArr[$k]); // Remove empty elements

			} elseif (preg_match('/^(["\'])/', $v) && substr($v, -1) !== $v[0]) {
				$quoteActive = $k;
			}
		}

		if ($unQuote) {
			foreach ($paramsArr as $key => &$val) {
				$val = preg_replace('/(^"|"$)/', '', $val);
				$val = preg_replace('/(^\'|\'$)/', '', $val);

			}
		}
			// return reindexed array
		return array_values($paramsArr);
	}


	/**
	 * Quotes a string for usage as JS parameter. Depends whether the value is
	 * used in script tags (it doesn't need/must not get htmlspecialchar'ed in
	 * this case).
	 *
	 * @param string $value the string to encode, may be empty
	 * @param boolean $withinCData
	 *		whether the escaped data is expected to be used as CDATA and thus
	 *		does not need to be htmlspecialchared
	 *
	 * @return string the encoded value already quoted (with single quotes),
	 *				will not be empty
	 */
	static public function quoteJSvalue($value, $withinCData = FALSE) {
		$escapedValue = addcslashes(
			$value, '\'' . '"' . '\\' . TAB . LF . CR
		);
		if (!$withinCData) {
			$escapedValue = htmlspecialchars($escapedValue);
		}
		return '\'' . $escapedValue . '\'';
	}


	/**
	 * Ends and cleans all output buffers
	 *
	 * @return	void
	 */
	public static function cleanOutputBuffers() {
		while (ob_end_clean()) {
			;
		}
		header('Content-Encoding: None', TRUE);
	}


	/**
	 *  Ends and flushes all output buffers
	 *
	 * @return	void
	 */
	public static function flushOutputBuffers() {
		$obContent = '';

		while ($obContent .= ob_get_clean()) {
			;
		}

			// if previously a "Content-Encoding: whatever" has been set, we have to unset it
		if (!headers_sent()) {
			$headersList = headers_list();
			foreach ($headersList as $header) {
					// split it up at the :
				list($key, $value) = self::trimExplode(':', $header, TRUE);
					// check if we have a Content-Encoding other than 'None'
				if (strtolower($key) === 'content-encoding' && strtolower($value) !== 'none') {
					header('Content-Encoding: None');
					break;
				}
			}
		}
		echo $obContent;
	}
}

?>