/******************************************************* HIDAPI - Multi-Platform library for communication with HID devices. Alan Ott Signal 11 Software 8/22/2009 Linux Version - 6/2/2010 Libusb Version - 8/13/2010 Copyright 2009, All Rights Reserved. At the discretion of the user of this library, this software may be licensed under the terms of the GNU Public License v3, a BSD-Style license, or the original HIDAPI license as outlined in the LICENSE.txt, LICENSE-gpl3.txt, LICENSE-bsd.txt, and LICENSE-orig.txt files located at the root of the source distribution. These files may also be found in the public source code repository located at: http://github.com/signal11/hidapi . ********************************************************/ #define _GNU_SOURCE // needed for wcsdup() before glibc 2.10 /* C */ #include #include #include #include #include #include /* Unix */ #include #include #include #include #include #include #include #include /* GNU / LibUSB */ #include "libusb.h" #include "iconv.h" #include "hidapi.h" #ifdef __cplusplus extern "C" { #endif #ifdef DEBUG_PRINTF #define LOG(...) fprintf(stderr, __VA_ARGS__) #else #define LOG(...) do {} while (0) #endif /* Uncomment to enable the retrieval of Usage and Usage Page in hid_enumerate(). Warning, this is very invasive as it requires the detach and re-attach of the kernel driver. See comments inside hid_enumerate(). Linux/libusb HIDAPI programs are encouraged to use the interface number instead to differentiate between interfaces on a composite HID device. */ /*#define INVASIVE_GET_USAGE*/ /* Linked List of input reports received from the device. */ struct input_report { uint8_t *data; size_t len; struct input_report *next; }; struct hid_device_ { /* Handle to the actual device. */ libusb_device_handle *device_handle; /* Endpoint information */ int input_endpoint; int output_endpoint; int input_ep_max_packet_size; /* The interface number of the HID */ int interface; /* Indexes of Strings */ int manufacturer_index; int product_index; int serial_index; /* Whether blocking reads are used */ int blocking; /* boolean */ /* Read thread objects */ pthread_t thread; pthread_mutex_t mutex; /* Protects input_reports */ pthread_cond_t condition; pthread_barrier_t barrier; /* Ensures correct startup sequence */ int shutdown_thread; struct libusb_transfer *transfer; /* List of received input reports. */ struct input_report *input_reports; }; static int initialized = 0; uint16_t get_usb_code_for_current_locale(void); static int return_data(hid_device *dev, unsigned char *data, size_t length); static hid_device *new_hid_device(void) { hid_device *dev = calloc(1, sizeof(hid_device)); dev->device_handle = NULL; dev->input_endpoint = 0; dev->output_endpoint = 0; dev->input_ep_max_packet_size = 0; dev->interface = 0; dev->manufacturer_index = 0; dev->product_index = 0; dev->serial_index = 0; dev->blocking = 1; dev->shutdown_thread = 0; dev->transfer = NULL; dev->input_reports = NULL; pthread_mutex_init(&dev->mutex, NULL); pthread_cond_init(&dev->condition, NULL); pthread_barrier_init(&dev->barrier, NULL, 2); return dev; } static void free_hid_device(hid_device *dev) { /* Clean up the thread objects */ pthread_barrier_destroy(&dev->barrier); pthread_cond_destroy(&dev->condition); pthread_mutex_destroy(&dev->mutex); /* Free the device itself */ free(dev); } #if 0 //TODO: Implement this funciton on Linux. static void register_error(hid_device *device, const char *op) { } #endif #ifdef INVASIVE_GET_USAGE /* Get bytes from a HID Report Descriptor. Only call with a num_bytes of 0, 1, 2, or 4. */ static uint32_t get_bytes(uint8_t *rpt, size_t len, size_t num_bytes, size_t cur) { /* Return if there aren't enough bytes. */ if (cur + num_bytes >= len) return 0; if (num_bytes == 0) return 0; else if (num_bytes == 1) { return rpt[cur+1]; } else if (num_bytes == 2) { return (rpt[cur+2] * 256 + rpt[cur+1]); } else if (num_bytes == 4) { return (rpt[cur+4] * 0x01000000 + rpt[cur+3] * 0x00010000 + rpt[cur+2] * 0x00000100 + rpt[cur+1] * 0x00000001); } else return 0; } /* Retrieves the device's Usage Page and Usage from the report descriptor. The algorithm is simple, as it just returns the first Usage and Usage Page that it finds in the descriptor. The return value is 0 on success and -1 on failure. */ static int get_usage(uint8_t *report_descriptor, size_t size, unsigned short *usage_page, unsigned short *usage) { int i = 0; int size_code; int data_len, key_size; int usage_found = 0, usage_page_found = 0; while (i < size) { int key = report_descriptor[i]; int key_cmd = key & 0xfc; //printf("key: %02hhx\n", key); if ((key & 0xf0) == 0xf0) { /* This is a Long Item. The next byte contains the length of the data section (value) for this key. See the HID specification, version 1.11, section 6.2.2.3, titled "Long Items." */ if (i+1 < size) data_len = report_descriptor[i+1]; else data_len = 0; /* malformed report */ key_size = 3; } else { /* This is a Short Item. The bottom two bits of the key contain the size code for the data section (value) for this key. Refer to the HID specification, version 1.11, section 6.2.2.2, titled "Short Items." */ size_code = key & 0x3; switch (size_code) { case 0: case 1: case 2: data_len = size_code; break; case 3: data_len = 4; break; default: /* Can't ever happen since size_code is & 0x3 */ data_len = 0; break; }; key_size = 1; } if (key_cmd == 0x4) { *usage_page = get_bytes(report_descriptor, size, data_len, i); usage_page_found = 1; //printf("Usage Page: %x\n", (uint32_t)*usage_page); } if (key_cmd == 0x8) { *usage = get_bytes(report_descriptor, size, data_len, i); usage_found = 1; //printf("Usage: %x\n", (uint32_t)*usage); } if (usage_page_found && usage_found) return 0; /* success */ /* Skip over this key and it's associated data */ i += data_len + key_size; } return -1; /* failure */ } #endif // INVASIVE_GET_USAGE /* Get the first language the device says it reports. This comes from USB string #0. */ static uint16_t get_first_language(libusb_device_handle *dev) { uint16_t buf[32]; int len; /* Get the string from libusb. */ len = libusb_get_string_descriptor(dev, 0x0, /* String ID */ 0x0, /* Language */ (unsigned char*)buf, sizeof(buf)); if (len < 4) return 0x0; return buf[1]; // First two bytes are len and descriptor type. } static int is_language_supported(libusb_device_handle *dev, uint16_t lang) { uint16_t buf[32]; int len; int i; /* Get the string from libusb. */ len = libusb_get_string_descriptor(dev, 0x0, /* String ID */ 0x0, /* Language */ (unsigned char*)buf, sizeof(buf)); if (len < 4) return 0x0; len /= 2; /* language IDs are two-bytes each. */ /* Start at index 1 because there are two bytes of protocol data. */ for (i = 1; i < len; i++) { if (buf[i] == lang) return 1; } return 0; } /* This function returns a newly allocated wide string containing the USB device string numbered by the index. The returned string must be freed by using free(). */ static wchar_t *get_usb_string(libusb_device_handle *dev, uint8_t idx) { char buf[512]; int len; wchar_t *str = NULL; wchar_t wbuf[256]; /* iconv variables */ iconv_t ic; size_t inbytes; size_t outbytes; size_t res; char *inptr; char *outptr; /* Determine which language to use. */ uint16_t lang; lang = get_usb_code_for_current_locale(); if (!is_language_supported(dev, lang)) lang = get_first_language(dev); /* Get the string from libusb. */ len = libusb_get_string_descriptor(dev, idx, lang, (unsigned char*)buf, sizeof(buf)); if (len < 0) return NULL; buf[sizeof(buf)-1] = '\0'; if (len+1 < sizeof(buf)) buf[len+1] = '\0'; /* Initialize iconv. */ ic = iconv_open("UTF-32", "UTF-16"); if (ic == (iconv_t)-1) return NULL; /* Convert to UTF-32 (wchar_t on glibc systems). Skip the first character (2-bytes). */ inptr = buf+2; inbytes = len-2; outptr = (char*) wbuf; outbytes = sizeof(wbuf); res = iconv(ic, &inptr, &inbytes, &outptr, &outbytes); if (res == (size_t)-1) goto err; /* Write the terminating NULL. */ wbuf[sizeof(wbuf)/sizeof(wbuf[0])-1] = 0x00000000; if (outbytes >= sizeof(wbuf[0])) *((wchar_t*)outptr) = 0x00000000; /* Allocate and copy the string. */ str = wcsdup(wbuf+1); err: iconv_close(ic); return str; } static char *make_path(libusb_device *dev, int interface_number) { char str[64]; snprintf(str, sizeof(str), "%04x:%04x:%02x", libusb_get_bus_number(dev), libusb_get_device_address(dev), interface_number); str[sizeof(str)-1] = '\0'; return strdup(str); } int HID_API_EXPORT hid_init(void) { if (!initialized) { if (libusb_init(NULL)) return -1; initialized = 1; } return 0; } int HID_API_EXPORT hid_exit(void) { if (initialized) { libusb_exit(NULL); initialized = 0; } return 0; } struct hid_device_info HID_API_EXPORT *hid_enumerate(unsigned short vendor_id, unsigned short product_id) { libusb_device **devs; libusb_device *dev; libusb_device_handle *handle; ssize_t num_devs; int i = 0; struct hid_device_info *root = NULL; // return object struct hid_device_info *cur_dev = NULL; setlocale(LC_ALL,""); if (!initialized) hid_init(); num_devs = libusb_get_device_list(NULL, &devs); if (num_devs < 0) return NULL; while ((dev = devs[i++]) != NULL) { struct libusb_device_descriptor desc; struct libusb_config_descriptor *conf_desc = NULL; int j, k; int interface_num = 0; int res = libusb_get_device_descriptor(dev, &desc); unsigned short dev_vid = desc.idVendor; unsigned short dev_pid = desc.idProduct; /* HID's are defined at the interface level. */ if (desc.bDeviceClass != LIBUSB_CLASS_PER_INTERFACE) continue; res = libusb_get_active_config_descriptor(dev, &conf_desc); if (res < 0) libusb_get_config_descriptor(dev, 0, &conf_desc); if (conf_desc) { for (j = 0; j < conf_desc->bNumInterfaces; j++) { const struct libusb_interface *intf = &conf_desc->interface[j]; for (k = 0; k < intf->num_altsetting; k++) { const struct libusb_interface_descriptor *intf_desc; intf_desc = &intf->altsetting[k]; if (intf_desc->bInterfaceClass == LIBUSB_CLASS_HID) { interface_num = intf_desc->bInterfaceNumber; /* Check the VID/PID against the arguments */ if ((vendor_id == 0x0 && product_id == 0x0) || (vendor_id == dev_vid && product_id == dev_pid)) { struct hid_device_info *tmp; /* VID/PID match. Create the record. */ tmp = calloc(1, sizeof(struct hid_device_info)); if (cur_dev) { cur_dev->next = tmp; } else { root = tmp; } cur_dev = tmp; /* Fill out the record */ cur_dev->next = NULL; cur_dev->path = make_path(dev, interface_num); res = libusb_open(dev, &handle); if (res >= 0) { /* Serial Number */ if (desc.iSerialNumber > 0) cur_dev->serial_number = get_usb_string(handle, desc.iSerialNumber); /* Manufacturer and Product strings */ if (desc.iManufacturer > 0) cur_dev->manufacturer_string = get_usb_string(handle, desc.iManufacturer); if (desc.iProduct > 0) cur_dev->product_string = get_usb_string(handle, desc.iProduct); #ifdef INVASIVE_GET_USAGE /* This section is removed because it is too invasive on the system. Getting a Usage Page and Usage requires parsing the HID Report descriptor. Getting a HID Report descriptor involves claiming the interface. Claiming the interface involves detaching the kernel driver. Detaching the kernel driver is hard on the system because it will unclaim interfaces (if another app has them claimed) and the re-attachment of the driver will sometimes change /dev entry names. It is for these reasons that this section is #if 0. For composite devices, use the interface field in the hid_device_info struct to distinguish between interfaces. */ int detached = 0; unsigned char data[256]; /* Usage Page and Usage */ res = libusb_kernel_driver_active(handle, interface_num); if (res == 1) { res = libusb_detach_kernel_driver(handle, interface_num); if (res < 0) LOG("Couldn't detach kernel driver, even though a kernel driver was attached."); else detached = 1; } res = libusb_claim_interface(handle, interface_num); if (res >= 0) { /* Get the HID Report Descriptor. */ res = libusb_control_transfer(handle, LIBUSB_ENDPOINT_IN|LIBUSB_RECIPIENT_INTERFACE, LIBUSB_REQUEST_GET_DESCRIPTOR, (LIBUSB_DT_REPORT << 8)|interface_num, 0, data, sizeof(data), 5000); if (res >= 0) { unsigned short page=0, usage=0; /* Parse the usage and usage page out of the report descriptor. */ get_usage(data, res, &page, &usage); cur_dev->usage_page = page; cur_dev->usage = usage; } else LOG("libusb_control_transfer() for getting the HID report failed with %d\n", res); /* Release the interface */ res = libusb_release_interface(handle, interface_num); if (res < 0) LOG("Can't release the interface.\n"); } else LOG("Can't claim interface %d\n", res); /* Re-attach kernel driver if necessary. */ if (detached) { res = libusb_attach_kernel_driver(handle, interface_num); if (res < 0) LOG("Couldn't re-attach kernel driver.\n"); } #endif /*******************/ libusb_close(handle); } /* VID/PID */ cur_dev->vendor_id = dev_vid; cur_dev->product_id = dev_pid; /* Release Number */ cur_dev->release_number = desc.bcdDevice; /* Interface Number */ cur_dev->interface_number = interface_num; } } } /* altsettings */ } /* interfaces */ libusb_free_config_descriptor(conf_desc); } } libusb_free_device_list(devs, 1); return root; } void HID_API_EXPORT hid_free_enumeration(struct hid_device_info *devs) { struct hid_device_info *d = devs; while (d) { struct hid_device_info *next = d->next; free(d->path); free(d->serial_number); free(d->manufacturer_string); free(d->product_string); free(d); d = next; } } hid_device * hid_open(unsigned short vendor_id, unsigned short product_id, wchar_t *serial_number) { struct hid_device_info *devs, *cur_dev; const char *path_to_open = NULL; hid_device *handle = NULL; devs = hid_enumerate(vendor_id, product_id); cur_dev = devs; while (cur_dev) { if (cur_dev->vendor_id == vendor_id && cur_dev->product_id == product_id) { if (serial_number) { if (wcscmp(serial_number, cur_dev->serial_number) == 0) { path_to_open = cur_dev->path; break; } } else { path_to_open = cur_dev->path; break; } } cur_dev = cur_dev->next; } if (path_to_open) { /* Open the device */ handle = hid_open_path(path_to_open); } hid_free_enumeration(devs); return handle; } static void read_callback(struct libusb_transfer *transfer) { hid_device *dev = transfer->user_data; if (transfer->status == LIBUSB_TRANSFER_COMPLETED) { struct input_report *rpt = malloc(sizeof(*rpt)); rpt->data = malloc(transfer->actual_length); memcpy(rpt->data, transfer->buffer, transfer->actual_length); rpt->len = transfer->actual_length; rpt->next = NULL; pthread_mutex_lock(&dev->mutex); /* Attach the new report object to the end of the list. */ if (dev->input_reports == NULL) { /* The list is empty. Put it at the root. */ dev->input_reports = rpt; pthread_cond_signal(&dev->condition); } else { /* Find the end of the list and attach. */ struct input_report *cur = dev->input_reports; int num_queued = 0; while (cur->next != NULL) { cur = cur->next; num_queued++; } cur->next = rpt; /* Pop one off if we've reached 30 in the queue. This way we don't grow forever if the user never reads anything from the device. */ if (num_queued > 30) { return_data(dev, NULL, 0); } } pthread_mutex_unlock(&dev->mutex); } else if (transfer->status == LIBUSB_TRANSFER_CANCELLED) { dev->shutdown_thread = 1; return; } else if (transfer->status == LIBUSB_TRANSFER_NO_DEVICE) { dev->shutdown_thread = 1; return; } else if (transfer->status == LIBUSB_TRANSFER_TIMED_OUT) { //LOG("Timeout (normal)\n"); } else { LOG("Unknown transfer code: %d\n", transfer->status); } /* Re-submit the transfer object. */ libusb_submit_transfer(transfer); } static void *read_thread(void *param) { hid_device *dev = param; unsigned char *buf; const size_t length = dev->input_ep_max_packet_size; /* Set up the transfer object. */ buf = malloc(length); dev->transfer = libusb_alloc_transfer(0); libusb_fill_interrupt_transfer(dev->transfer, dev->device_handle, dev->input_endpoint, buf, length, read_callback, dev, 5000/*timeout*/); /* Make the first submission. Further submissions are made from inside read_callback() */ libusb_submit_transfer(dev->transfer); // Notify the main thread that the read thread is up and running. pthread_barrier_wait(&dev->barrier); /* Handle all the events. */ while (!dev->shutdown_thread) { int res; res = libusb_handle_events(NULL); if (res < 0) { /* There was an error. Break out of this loop. */ break; } } /* Cancel any transfer that may be pending. This call will fail if no transfers are pending, but that's OK. */ if (libusb_cancel_transfer(dev->transfer) == 0) { /* The transfer was cancelled, so wait for its completion. */ libusb_handle_events(NULL); } /* Now that the read thread is stopping, Wake any threads which are waiting on data (in hid_read_timeout()). Do this under a mutex to make sure that a thread which is about to go to sleep waiting on the condition acutally will go to sleep before the condition is signaled. */ pthread_mutex_lock(&dev->mutex); pthread_cond_broadcast(&dev->condition); pthread_mutex_unlock(&dev->mutex); /* The dev->transfer->buffer and dev->transfer objects are cleaned up in hid_close(). They are not cleaned up here because this thread could end either due to a disconnect or due to a user call to hid_close(). In both cases the objects can be safely cleaned up after the call to pthread_join() (in hid_close()), but since hid_close() calls libusb_cancel_transfer(), on these objects, they can not be cleaned up here. */ return NULL; } hid_device * HID_API_EXPORT hid_open_path(const char *path) { hid_device *dev = NULL; dev = new_hid_device(); libusb_device **devs; libusb_device *usb_dev; ssize_t num_devs; int res; int d = 0; int good_open = 0; setlocale(LC_ALL,""); if (!initialized) hid_init(); num_devs = libusb_get_device_list(NULL, &devs); while ((usb_dev = devs[d++]) != NULL) { struct libusb_device_descriptor desc; struct libusb_config_descriptor *conf_desc = NULL; int i,j,k; libusb_get_device_descriptor(usb_dev, &desc); if (libusb_get_active_config_descriptor(usb_dev, &conf_desc) < 0) continue; for (j = 0; j < conf_desc->bNumInterfaces; j++) { const struct libusb_interface *intf = &conf_desc->interface[j]; for (k = 0; k < intf->num_altsetting; k++) { const struct libusb_interface_descriptor *intf_desc; intf_desc = &intf->altsetting[k]; if (intf_desc->bInterfaceClass == LIBUSB_CLASS_HID) { char *dev_path = make_path(usb_dev, intf_desc->bInterfaceNumber); if (!strcmp(dev_path, path)) { /* Matched Paths. Open this device */ // OPEN HERE // res = libusb_open(usb_dev, &dev->device_handle); if (res < 0) { LOG("can't open device\n"); free(dev_path); break; } good_open = 1; /* Detach the kernel driver, but only if the device is managed by the kernel */ if (libusb_kernel_driver_active(dev->device_handle, intf_desc->bInterfaceNumber) == 1) { res = libusb_detach_kernel_driver(dev->device_handle, intf_desc->bInterfaceNumber); if (res < 0) { libusb_close(dev->device_handle); LOG("Unable to detach Kernel Driver\n"); free(dev_path); good_open = 0; break; } } res = libusb_claim_interface(dev->device_handle, intf_desc->bInterfaceNumber); if (res < 0) { LOG("can't claim interface %d: %d\n", intf_desc->bInterfaceNumber, res); free(dev_path); libusb_close(dev->device_handle); good_open = 0; break; } /* Store off the string descriptor indexes */ dev->manufacturer_index = desc.iManufacturer; dev->product_index = desc.iProduct; dev->serial_index = desc.iSerialNumber; /* Store off the interface number */ dev->interface = intf_desc->bInterfaceNumber; /* Find the INPUT and OUTPUT endpoints. An OUTPUT endpoint is not required. */ for (i = 0; i < intf_desc->bNumEndpoints; i++) { const struct libusb_endpoint_descriptor *ep = &intf_desc->endpoint[i]; /* Determine the type and direction of this endpoint. */ int is_interrupt = (ep->bmAttributes & LIBUSB_TRANSFER_TYPE_MASK) == LIBUSB_TRANSFER_TYPE_INTERRUPT; int is_output = (ep->bEndpointAddress & LIBUSB_ENDPOINT_DIR_MASK) == LIBUSB_ENDPOINT_OUT; int is_input = (ep->bEndpointAddress & LIBUSB_ENDPOINT_DIR_MASK) == LIBUSB_ENDPOINT_IN; /* Decide whether to use it for intput or output. */ if (dev->input_endpoint == 0 && is_interrupt && is_input) { /* Use this endpoint for INPUT */ dev->input_endpoint = ep->bEndpointAddress; dev->input_ep_max_packet_size = ep->wMaxPacketSize; } if (dev->output_endpoint == 0 && is_interrupt && is_output) { /* Use this endpoint for OUTPUT */ dev->output_endpoint = ep->bEndpointAddress; } } pthread_create(&dev->thread, NULL, read_thread, dev); // Wait here for the read thread to be initialized. pthread_barrier_wait(&dev->barrier); } free(dev_path); } } } libusb_free_config_descriptor(conf_desc); } libusb_free_device_list(devs, 1); // If we have a good handle, return it. if (good_open) { return dev; } else { // Unable to open any devices. free_hid_device(dev); return NULL; } } int HID_API_EXPORT hid_write(hid_device *dev, const unsigned char *data, size_t length) { int res; int report_number = data[0]; int skipped_report_id = 0; if (report_number == 0x0) { data++; length--; skipped_report_id = 1; } if (dev->output_endpoint <= 0) { /* No interrput out endpoint. Use the Control Endpoint */ res = libusb_control_transfer(dev->device_handle, LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE|LIBUSB_ENDPOINT_OUT, 0x09/*HID Set_Report*/, (2/*HID output*/ << 8) | report_number, dev->interface, (unsigned char *)data, length, 1000/*timeout millis*/); if (res < 0) return -1; if (skipped_report_id) length++; return length; } else { /* Use the interrupt out endpoint */ int actual_length; res = libusb_interrupt_transfer(dev->device_handle, dev->output_endpoint, (unsigned char*)data, length, &actual_length, 1000); if (res < 0) return -1; if (skipped_report_id) actual_length++; return actual_length; } } /* Helper function, to simplify hid_read(). This should be called with dev->mutex locked. */ static int return_data(hid_device *dev, unsigned char *data, size_t length) { /* Copy the data out of the linked list item (rpt) into the return buffer (data), and delete the liked list item. */ struct input_report *rpt = dev->input_reports; size_t len = (length < rpt->len)? length: rpt->len; if (len > 0) memcpy(data, rpt->data, len); dev->input_reports = rpt->next; free(rpt->data); free(rpt); return len; } static void cleanup_mutex(void *param) { hid_device *dev = param; pthread_mutex_unlock(&dev->mutex); } int HID_API_EXPORT hid_read_timeout(hid_device *dev, unsigned char *data, size_t length, int milliseconds) { int bytes_read = -1; #if 0 int transferred; int res = libusb_interrupt_transfer(dev->device_handle, dev->input_endpoint, data, length, &transferred, 5000); LOG("transferred: %d\n", transferred); return transferred; #endif pthread_mutex_lock(&dev->mutex); pthread_cleanup_push(&cleanup_mutex, dev); /* There's an input report queued up. Return it. */ if (dev->input_reports) { /* Return the first one */ bytes_read = return_data(dev, data, length); goto ret; } if (dev->shutdown_thread) { /* This means the device has been disconnected. An error code of -1 should be returned. */ bytes_read = -1; goto ret; } if (milliseconds == -1) { /* Blocking */ while (!dev->input_reports && !dev->shutdown_thread) { pthread_cond_wait(&dev->condition, &dev->mutex); } if (dev->input_reports) { bytes_read = return_data(dev, data, length); } } else if (milliseconds > 0) { /* Non-blocking, but called with timeout. */ int res; struct timespec ts; clock_gettime(CLOCK_REALTIME, &ts); ts.tv_sec += milliseconds / 1000; ts.tv_nsec += (milliseconds % 1000) * 1000000; if (ts.tv_nsec >= 1000000000L) { ts.tv_sec++; ts.tv_nsec -= 1000000000L; } while (!dev->input_reports && !dev->shutdown_thread) { res = pthread_cond_timedwait(&dev->condition, &dev->mutex, &ts); if (res == 0) { if (dev->input_reports) { bytes_read = return_data(dev, data, length); break; } /* If we're here, there was a spurious wake up or the read thread was shutdown. Run the loop again (ie: don't break). */ } else if (res == ETIMEDOUT) { /* Timed out. */ bytes_read = 0; break; } else { /* Error. */ bytes_read = -1; break; } } } else { /* Purely non-blocking */ bytes_read = 0; } ret: pthread_mutex_unlock(&dev->mutex); pthread_cleanup_pop(0); return bytes_read; } int HID_API_EXPORT hid_read(hid_device *dev, unsigned char *data, size_t length) { return hid_read_timeout(dev, data, length, dev->blocking ? -1 : 0); } int HID_API_EXPORT hid_set_nonblocking(hid_device *dev, int nonblock) { dev->blocking = !nonblock; return 0; } int HID_API_EXPORT hid_send_feature_report(hid_device *dev, const unsigned char *data, size_t length) { int res = -1; int skipped_report_id = 0; int report_number = data[0]; if (report_number == 0x0) { data++; length--; skipped_report_id = 1; } res = libusb_control_transfer(dev->device_handle, LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE|LIBUSB_ENDPOINT_OUT, 0x09/*HID set_report*/, (3/*HID feature*/ << 8) | report_number, dev->interface, (unsigned char *)data, length, 1000/*timeout millis*/); if (res < 0) return -1; /* Account for the report ID */ if (skipped_report_id) length++; return length; } int HID_API_EXPORT hid_get_feature_report(hid_device *dev, unsigned char *data, size_t length) { int res = -1; int skipped_report_id = 0; int report_number = data[0]; if (report_number == 0x0) { /* Offset the return buffer by 1, so that the report ID will remain in byte 0. */ data++; length--; skipped_report_id = 1; } res = libusb_control_transfer(dev->device_handle, LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE|LIBUSB_ENDPOINT_IN, 0x01/*HID get_report*/, (3/*HID feature*/ << 8) | report_number, dev->interface, (unsigned char *)data, length, 1000/*timeout millis*/); if (res < 0) return -1; if (skipped_report_id) res++; return res; } void HID_API_EXPORT hid_close(hid_device *dev) { if (!dev) return; /* Cause read_thread() to stop. */ dev->shutdown_thread = 1; libusb_cancel_transfer(dev->transfer); /* Wait for read_thread() to end. */ pthread_join(dev->thread, NULL); /* Clean up the Transfer objects allocated in read_thread(). */ free(dev->transfer->buffer); libusb_free_transfer(dev->transfer); /* release the interface */ libusb_release_interface(dev->device_handle, dev->interface); /* Close the handle */ libusb_close(dev->device_handle); /* Clear out the queue of received reports. */ pthread_mutex_lock(&dev->mutex); while (dev->input_reports) { return_data(dev, NULL, 0); } pthread_mutex_unlock(&dev->mutex); free_hid_device(dev); } int HID_API_EXPORT_CALL hid_get_manufacturer_string(hid_device *dev, wchar_t *string, size_t maxlen) { return hid_get_indexed_string(dev, dev->manufacturer_index, string, maxlen); } int HID_API_EXPORT_CALL hid_get_product_string(hid_device *dev, wchar_t *string, size_t maxlen) { return hid_get_indexed_string(dev, dev->product_index, string, maxlen); } int HID_API_EXPORT_CALL hid_get_serial_number_string(hid_device *dev, wchar_t *string, size_t maxlen) { return hid_get_indexed_string(dev, dev->serial_index, string, maxlen); } int HID_API_EXPORT_CALL hid_get_indexed_string(hid_device *dev, int string_index, wchar_t *string, size_t maxlen) { wchar_t *str; str = get_usb_string(dev->device_handle, string_index); if (str) { wcsncpy(string, str, maxlen); string[maxlen-1] = L'\0'; free(str); return 0; } else return -1; } HID_API_EXPORT const wchar_t * HID_API_CALL hid_error(hid_device *dev) { return NULL; } struct lang_map_entry { const char *name; const char *string_code; uint16_t usb_code; }; #define LANG(name,code,usb_code) { name, code, usb_code } static struct lang_map_entry lang_map[] = { LANG("Afrikaans", "af", 0x0436), LANG("Albanian", "sq", 0x041C), LANG("Arabic - United Arab Emirates", "ar_ae", 0x3801), LANG("Arabic - Bahrain", "ar_bh", 0x3C01), LANG("Arabic - Algeria", "ar_dz", 0x1401), LANG("Arabic - Egypt", "ar_eg", 0x0C01), LANG("Arabic - Iraq", "ar_iq", 0x0801), LANG("Arabic - Jordan", "ar_jo", 0x2C01), LANG("Arabic - Kuwait", "ar_kw", 0x3401), LANG("Arabic - Lebanon", "ar_lb", 0x3001), LANG("Arabic - Libya", "ar_ly", 0x1001), LANG("Arabic - Morocco", "ar_ma", 0x1801), LANG("Arabic - Oman", "ar_om", 0x2001), LANG("Arabic - Qatar", "ar_qa", 0x4001), LANG("Arabic - Saudi Arabia", "ar_sa", 0x0401), LANG("Arabic - Syria", "ar_sy", 0x2801), LANG("Arabic - Tunisia", "ar_tn", 0x1C01), LANG("Arabic - Yemen", "ar_ye", 0x2401), LANG("Armenian", "hy", 0x042B), LANG("Azeri - Latin", "az_az", 0x042C), LANG("Azeri - Cyrillic", "az_az", 0x082C), LANG("Basque", "eu", 0x042D), LANG("Belarusian", "be", 0x0423), LANG("Bulgarian", "bg", 0x0402), LANG("Catalan", "ca", 0x0403), LANG("Chinese - China", "zh_cn", 0x0804), LANG("Chinese - Hong Kong SAR", "zh_hk", 0x0C04), LANG("Chinese - Macau SAR", "zh_mo", 0x1404), LANG("Chinese - Singapore", "zh_sg", 0x1004), LANG("Chinese - Taiwan", "zh_tw", 0x0404), LANG("Croatian", "hr", 0x041A), LANG("Czech", "cs", 0x0405), LANG("Danish", "da", 0x0406), LANG("Dutch - Netherlands", "nl_nl", 0x0413), LANG("Dutch - Belgium", "nl_be", 0x0813), LANG("English - Australia", "en_au", 0x0C09), LANG("English - Belize", "en_bz", 0x2809), LANG("English - Canada", "en_ca", 0x1009), LANG("English - Caribbean", "en_cb", 0x2409), LANG("English - Ireland", "en_ie", 0x1809), LANG("English - Jamaica", "en_jm", 0x2009), LANG("English - New Zealand", "en_nz", 0x1409), LANG("English - Phillippines", "en_ph", 0x3409), LANG("English - Southern Africa", "en_za", 0x1C09), LANG("English - Trinidad", "en_tt", 0x2C09), LANG("English - Great Britain", "en_gb", 0x0809), LANG("English - United States", "en_us", 0x0409), LANG("Estonian", "et", 0x0425), LANG("Farsi", "fa", 0x0429), LANG("Finnish", "fi", 0x040B), LANG("Faroese", "fo", 0x0438), LANG("French - France", "fr_fr", 0x040C), LANG("French - Belgium", "fr_be", 0x080C), LANG("French - Canada", "fr_ca", 0x0C0C), LANG("French - Luxembourg", "fr_lu", 0x140C), LANG("French - Switzerland", "fr_ch", 0x100C), LANG("Gaelic - Ireland", "gd_ie", 0x083C), LANG("Gaelic - Scotland", "gd", 0x043C), LANG("German - Germany", "de_de", 0x0407), LANG("German - Austria", "de_at", 0x0C07), LANG("German - Liechtenstein", "de_li", 0x1407), LANG("German - Luxembourg", "de_lu", 0x1007), LANG("German - Switzerland", "de_ch", 0x0807), LANG("Greek", "el", 0x0408), LANG("Hebrew", "he", 0x040D), LANG("Hindi", "hi", 0x0439), LANG("Hungarian", "hu", 0x040E), LANG("Icelandic", "is", 0x040F), LANG("Indonesian", "id", 0x0421), LANG("Italian - Italy", "it_it", 0x0410), LANG("Italian - Switzerland", "it_ch", 0x0810), LANG("Japanese", "ja", 0x0411), LANG("Korean", "ko", 0x0412), LANG("Latvian", "lv", 0x0426), LANG("Lithuanian", "lt", 0x0427), LANG("F.Y.R.O. Macedonia", "mk", 0x042F), LANG("Malay - Malaysia", "ms_my", 0x043E), LANG("Malay – Brunei", "ms_bn", 0x083E), LANG("Maltese", "mt", 0x043A), LANG("Marathi", "mr", 0x044E), LANG("Norwegian - Bokml", "no_no", 0x0414), LANG("Norwegian - Nynorsk", "no_no", 0x0814), LANG("Polish", "pl", 0x0415), LANG("Portuguese - Portugal", "pt_pt", 0x0816), LANG("Portuguese - Brazil", "pt_br", 0x0416), LANG("Raeto-Romance", "rm", 0x0417), LANG("Romanian - Romania", "ro", 0x0418), LANG("Romanian - Republic of Moldova", "ro_mo", 0x0818), LANG("Russian", "ru", 0x0419), LANG("Russian - Republic of Moldova", "ru_mo", 0x0819), LANG("Sanskrit", "sa", 0x044F), LANG("Serbian - Cyrillic", "sr_sp", 0x0C1A), LANG("Serbian - Latin", "sr_sp", 0x081A), LANG("Setsuana", "tn", 0x0432), LANG("Slovenian", "sl", 0x0424), LANG("Slovak", "sk", 0x041B), LANG("Sorbian", "sb", 0x042E), LANG("Spanish - Spain (Traditional)", "es_es", 0x040A), LANG("Spanish - Argentina", "es_ar", 0x2C0A), LANG("Spanish - Bolivia", "es_bo", 0x400A), LANG("Spanish - Chile", "es_cl", 0x340A), LANG("Spanish - Colombia", "es_co", 0x240A), LANG("Spanish - Costa Rica", "es_cr", 0x140A), LANG("Spanish - Dominican Republic", "es_do", 0x1C0A), LANG("Spanish - Ecuador", "es_ec", 0x300A), LANG("Spanish - Guatemala", "es_gt", 0x100A), LANG("Spanish - Honduras", "es_hn", 0x480A), LANG("Spanish - Mexico", "es_mx", 0x080A), LANG("Spanish - Nicaragua", "es_ni", 0x4C0A), LANG("Spanish - Panama", "es_pa", 0x180A), LANG("Spanish - Peru", "es_pe", 0x280A), LANG("Spanish - Puerto Rico", "es_pr", 0x500A), LANG("Spanish - Paraguay", "es_py", 0x3C0A), LANG("Spanish - El Salvador", "es_sv", 0x440A), LANG("Spanish - Uruguay", "es_uy", 0x380A), LANG("Spanish - Venezuela", "es_ve", 0x200A), LANG("Southern Sotho", "st", 0x0430), LANG("Swahili", "sw", 0x0441), LANG("Swedish - Sweden", "sv_se", 0x041D), LANG("Swedish - Finland", "sv_fi", 0x081D), LANG("Tamil", "ta", 0x0449), LANG("Tatar", "tt", 0X0444), LANG("Thai", "th", 0x041E), LANG("Turkish", "tr", 0x041F), LANG("Tsonga", "ts", 0x0431), LANG("Ukrainian", "uk", 0x0422), LANG("Urdu", "ur", 0x0420), LANG("Uzbek - Cyrillic", "uz_uz", 0x0843), LANG("Uzbek – Latin", "uz_uz", 0x0443), LANG("Vietnamese", "vi", 0x042A), LANG("Xhosa", "xh", 0x0434), LANG("Yiddish", "yi", 0x043D), LANG("Zulu", "zu", 0x0435), LANG(NULL, NULL, 0x0), }; uint16_t get_usb_code_for_current_locale(void) { char *locale; char search_string[64]; char *ptr; /* Get the current locale. */ locale = setlocale(0, NULL); if (!locale) return 0x0; /* Make a copy of the current locale string. */ strncpy(search_string, locale, sizeof(search_string)); search_string[sizeof(search_string)-1] = '\0'; /* Chop off the encoding part, and make it lower case. */ ptr = search_string; while (*ptr) { *ptr = tolower(*ptr); if (*ptr == '.') { *ptr = '\0'; break; } ptr++; } /* Find the entry which matches the string code of our locale. */ struct lang_map_entry *lang = lang_map; while (lang->string_code) { if (!strcmp(lang->string_code, search_string)) { return lang->usb_code; } lang++; } /* There was no match. Find with just the language only. */ /* Chop off the variant. Chop it off at the '_'. */ ptr = search_string; while (*ptr) { *ptr = tolower(*ptr); if (*ptr == '_') { *ptr = '\0'; break; } ptr++; } #if 0 // TODO: Do we need this? /* Find the entry which matches the string code of our language. */ lang = lang_map; while (lang->string_code) { if (!strcmp(lang->string_code, search_string)) { return lang->usb_code; } lang++; } #endif /* Found nothing. */ return 0x0; } #ifdef __cplusplus } #endif