# THIS FILE IS GENERATED AUTOMATICALLY FROM THE D-I PO MASTER FILES
# The master files can be found under packages/po/
#
# DO NOT MODIFY THIS FILE DIRECTLY: SUCH CHANGES WILL BE LOST
#
# Simplified Chinese translation for Debian Installer.
#
# Copyright (C) 2003-2008 Software in the Public Interest, Inc.
# This file is distributed under the same license as debian-installer.
#
# Translated by Yijun Yuan (2004), Carlos Z.F. Liu (2004,2005,2006),
# Ming Hua (2005,2006,2007,2008), Xiyue Deng (2008), Kov Chai (2008),
# Kenlen Lai (2008), WCM (2008), Ren Xiaolei (2008).
#
#
# Translations from iso-codes:
#   Tobias Toedter <t.toedter@gmx.net>, 2007.
#     Translations taken from ICU SVN on 2007-09-09
#
#   Free Software Foundation, Inc., 2002, 2003, 2007, 2008.
#   Alastair McKinstry <mckinstry@computer.org>, 2001,2002.
#   Translations taken from KDE:
#   - Wang Jian <lark@linux.net.cn>, 2000.
#   - Carlos Z.F. Liu <carlosliu@users.sourceforge.net>, 2004 - 2006.
#   LI Daobing <lidaobing@gmail.com>, 2007, 2008, 2009, 2010.
#   YunQiang Su <wzssyqa@gmail.com>, 2011.
#
#   Mai Hao Hui <mhh@126.com>, 2001 (translations from galeon)
# YunQiang Su <wzssyqa@gmail.com>, 2010, 2011.
#
msgid ""
msgstr ""
"Project-Id-Version: debian-installer\n"
"Report-Msgid-Bugs-To: grub-installer@packages.debian.org\n"
"POT-Creation-Date: 2011-07-30 22:49+0000\n"
"PO-Revision-Date: 2011-08-11 11:13+0800\n"
"Last-Translator: YunQiang Su <wzssyqa@gmail.com>\n"
"Language-Team: Chinese (simplified) <i18n-zh@googlegroups.com>\n"
"Language: zh_CN\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bits\n"
"Plural-Forms: nplurals=1; plural=0;\n"

#. Type: boolean
#. Description
#. :sl1:
#. Type: boolean
#. Description
#. :sl1:
#: ../grub-installer.templates:1001 ../grub-installer.templates:2001
msgid "Install the GRUB boot loader to the master boot record?"
msgstr "将 GRUB 启动引导器安装到主引导记录 (MBR) 上吗？"

#. Type: boolean
#. Description
#. :sl1:
#: ../grub-installer.templates:1001
msgid ""
"The following other operating systems have been detected on this computer: "
"${OS_LIST}"
msgstr "安装程序在这台计算机上探测到了以下其它操作系统：${OS_LIST}"

#. Type: boolean
#. Description
#. :sl1:
#: ../grub-installer.templates:1001
msgid ""
"If all of your operating systems are listed above, then it should be safe to "
"install the boot loader to the master boot record of your first hard drive. "
"When your computer boots, you will be able to choose to load one of these "
"operating systems or your new system."
msgstr ""
"如果以上列出了您所有的操作系统，那么您应该可以安全地将启动引导器安装到第一硬"
"盘的主引导记录 (MBR) 上。当计算机启动时，您应该可以选择以上任意一种操作系统或"
"者您的新系统。"

#. Type: boolean
#. Description
#. :sl1:
#: ../grub-installer.templates:2001
msgid ""
"It seems that this new installation is the only operating system on this "
"computer. If so, it should be safe to install the GRUB boot loader to the "
"master boot record of your first hard drive."
msgstr ""
"看起来新安装的系统将是这台计算机上唯一的操作系统。如果的确如此，您应该可以安"
"全地将 GRUB 启动引导器安装到第一硬盘的主引导记录 (MBR) 上。"

#. Type: boolean
#. Description
#. :sl1:
#: ../grub-installer.templates:2001
msgid ""
"Warning: If the installer failed to detect another operating system that is "
"present on your computer, modifying the master boot record will make that "
"operating system temporarily unbootable, though GRUB can be manually "
"configured later to boot it."
msgstr ""
"警告：如果安装程序无法在您的计算机上探测到已存在的其它操作系统，修改主引导记"
"录动作暂时将使该操作系统无法启动。但是，您可以稍后再手动设置 GRUB 以启动它。"

#. Type: boolean
#. Description
#. :sl3:
#: ../grub-installer.templates:3001
msgid "Install the GRUB boot loader to the Serial ATA RAID disk?"
msgstr "将 GRUB 启动引导程序安装到 SATA RAID 磁盘吗？"

#. Type: boolean
#. Description
#. :sl3:
#: ../grub-installer.templates:3001
msgid "Installation of GRUB on Serial ATA RAID is experimental."
msgstr "在 SATA RAID 上安装 GRUB 功能仍是试验性的。"

#. Type: boolean
#. Description
#. :sl3:
#: ../grub-installer.templates:3001
msgid ""
"GRUB is always installed to the master boot record (MBR) of the Serial ATA "
"RAID disk. It is also assumed that disk is listed as the first hard disk in "
"the boot order defined in the system's BIOS setup."
msgstr ""
"GRUB 总是要被安装到 SATA RAID 磁盘的主引导记录 (master boot record, MBR) 上。"
"另外也假定该磁盘在系统 BIOS 设置所定义的启动顺序中被列为第一块硬盘。"

#. Type: boolean
#. Description
#. :sl3:
#. Type: boolean
#. Description
#. :sl3:
#: ../grub-installer.templates:3001 ../grub-installer.templates:5001
msgid "The GRUB root device is: ${GRUBROOT}."
msgstr "GRUB 的根设备为：${GRUBROOT}。"

#. Type: error
#. Description
#. :sl3:
#. Type: error
#. Description
#. :sl3:
#. Type: error
#. Description
#. :sl2:
#: ../grub-installer.templates:4001 ../grub-installer.templates:6001
#: ../grub-installer.templates:14001
msgid "Unable to configure GRUB"
msgstr "无法配置 GRUB"

#. Type: error
#. Description
#. :sl3:
#: ../grub-installer.templates:4001
msgid "An error occurred while setting up GRUB for your Serial ATA RAID disk."
msgstr "在您的 SATA RAID 磁盘上设置 GRUB 时出现一个错误。"

#. Type: error
#. Description
#. :sl3:
#. Type: error
#. Description
#. :sl3:
#: ../grub-installer.templates:4001 ../grub-installer.templates:6001
msgid "The GRUB installation has been aborted."
msgstr "GRUB 安装已被中止。"

#. Type: boolean
#. Description
#. :sl3:
#: ../grub-installer.templates:5001
msgid "Install the GRUB boot loader to the multipath device?"
msgstr "将 GRUB 启动引导器安装到多重路径(multipath)设备上吗？"

#. Type: boolean
#. Description
#. :sl3:
#: ../grub-installer.templates:5001
msgid "Installation of GRUB on multipath is experimental."
msgstr "在多重路径(multipath)上安装 GRUB 功能仍是试验性的。"

#. Type: boolean
#. Description
#. :sl3:
#: ../grub-installer.templates:5001
msgid ""
"GRUB is always installed to the master boot record (MBR) of the multipath "
"device. It is also assumed that the WWID of this device is selected as boot "
"device in the system's FibreChannel adapter BIOS."
msgstr ""
"GRUB 总是要被安装到多重路径(multipath)设备的主引导记录 (master boot record, "
"MBR) 上。另外也假定该设备的 WWID 在系统的 FibreChannel 适配器 BIOS 里设置为启"
"动设备。"

#. Type: error
#. Description
#. :sl3:
#: ../grub-installer.templates:6001
msgid "An error occurred while setting up GRUB for the multipath device."
msgstr "在您的多重路径(multipath)设备上设置 GRUB 时出现一个错误。"

#. Type: string
#. Description
#. :sl2:
#: ../grub-installer.templates:7001
msgid "Device for boot loader installation:"
msgstr "安装启动引导器的设备："

#. Type: string
#. Description
#. :sl2:
#: ../grub-installer.templates:7001
msgid ""
"You need to make the newly installed system bootable, by installing the GRUB "
"boot loader on a bootable device. The usual way to do this is to install "
"GRUB on the master boot record of your first hard drive. If you prefer, you "
"can install GRUB elsewhere on the drive, or to another drive, or even to a "
"floppy."
msgstr ""
"您需要通过将 GRUB 启动引导器安装到可启动设备上以使新安装的系统能够启动。通常"
"的作法是将 GRUB 安装到您第一块硬盘的主引导记录 (MBR) 上。如果您愿意，也可以"
"将 GRUB 安装到驱动器的其它地方，或者其它的驱动器上，甚至还可以安装到一张软盘"
"上。"

#. Type: string
#. Description
#. :sl2:
#: ../grub-installer.templates:7001
msgid ""
"The device should be specified as a device in /dev. Below are some "
"examples:\n"
" - \"/dev/sda\" will install GRUB to the master boot record of your first\n"
"   hard drive;\n"
" - \"/dev/sda2\" will use the second partition of your first hard drive;\n"
" - \"/dev/sdc5\" will use the first extended partition of your third hard\n"
"   drive;\n"
" - \"/dev/fd0\" will install GRUB to a floppy."
msgstr ""
"设备应该以 /dev 目录下的设备名称的方式指定。举例如下：\n"
" - “/dev/sda”将会把 GRUB 安装到您的第一块硬盘的主引导  记录 (MBR) 上；\n"
" - “/dev/sda2”将安装到您的第一个硬盘的第二分区上；\n"
" - “/dev/sdc5”将安装到您的第三个驱动器的第一扩展分区上；\n"
" - “/dev/fd0”将会把 GRUB 安装到软盘上。"

#. Type: password
#. Description
#. :sl2:
#: ../grub-installer.templates:8001
msgid "GRUB password:"
msgstr "GRUB 口令："

#. Type: password
#. Description
#. :sl2:
#: ../grub-installer.templates:8001
msgid ""
"The GRUB boot loader offers many powerful interactive features, which could "
"be used to compromise your system if unauthorized users have access to the "
"machine when it is starting up. To defend against this, you may choose a "
"password which will be required before editing menu entries or entering the "
"GRUB command-line interface. By default, any user will still be able to "
"start any menu entry without entering the password."
msgstr ""
"GRUB 启动引导器提供了很多强大的交互特性。如果未被授权的用户在其启动过程中对机"
"器进行操作，该引导器也可被用来入侵您的系统。为了防止这种攻击，您可以为编辑菜"
"单项和 GRUB 命令行界面输入功能设定一个密码。默认情况下，所有用户依然能够启动"
"任意菜单项，而无需输入该密码。"

#. Type: password
#. Description
#. :sl2:
#: ../grub-installer.templates:8001
msgid "If you do not wish to set a GRUB password, leave this field blank."
msgstr "如果您不想设置 GRUB 口令，请将此处置空。"

#. Type: password
#. Description
#. :sl2:
#: ../grub-installer.templates:9001
msgid "Re-enter password to verify:"
msgstr "请再次输入密码以验证其正确性："

#. Type: password
#. Description
#. :sl2:
#: ../grub-installer.templates:9001
msgid ""
"Please enter the same GRUB password again to verify that you have typed it "
"correctly."
msgstr "请再次输入相同的 GRUB 口令以保证您的密码输入无误。"

#. Type: error
#. Description
#. :sl2:
#: ../grub-installer.templates:10001
msgid "Password input error"
msgstr "密码输入错误"

#. Type: error
#. Description
#. :sl2:
#: ../grub-installer.templates:10001
msgid "The two passwords you entered were not the same. Please try again."
msgstr "您所输入的两个密码并不相同。请重新输入。"

#. Type: error
#. Description
#. :sl2:
#: ../grub-installer.templates:12001
msgid "GRUB installation failed"
msgstr "GRUB 安装失败"

#. Type: error
#. Description
#. :sl2:
#: ../grub-installer.templates:12001
msgid ""
"The '${GRUB}' package failed to install into /target/. Without the GRUB boot "
"loader, the installed system will not boot."
msgstr ""
"无法将 ${GRUB} 软件包安装到 /target/ 中。如果没有 GRUB 启动引导器，所安装的系"
"统将无法启动。"

#. Type: error
#. Description
#. :sl2:
#: ../grub-installer.templates:13001
msgid "Unable to install GRUB in ${BOOTDEV}"
msgstr "无法将 GRUB 安装到 ${BOOTDEV}"

#. Type: error
#. Description
#. :sl2:
#: ../grub-installer.templates:13001
msgid "Executing 'grub-install ${BOOTDEV}' failed."
msgstr "执行 'grub-install ${BOOTDEV}' 失败。"

#. Type: error
#. Description
#. :sl2:
#. Type: error
#. Description
#. :sl2:
#: ../grub-installer.templates:13001 ../grub-installer.templates:14001
msgid "This is a fatal error."
msgstr "这是一个致命错误。"

#. Type: error
#. Description
#. :sl2:
#: ../grub-installer.templates:14001
msgid "Executing 'update-grub' failed."
msgstr "执行 'update-grub' 失败。"

#. Type: boolean
#. Description
#. :sl4:
#: ../grub-installer.templates:15001
msgid "Install GRUB?"
msgstr "安装 GRUB？"

#. Type: boolean
#. Description
#. :sl4:
#: ../grub-installer.templates:15001
msgid ""
"GRUB 2 is the next generation of GNU GRUB, the boot loader that is commonly "
"used on i386/amd64 PCs. It is now also available for ${ARCH}."
msgstr ""
"GRUB 2 是新一代的 GNU GRUB，主要在 i386/amd64 PC 机上使用的引导器。它现在也可"
"以用于 ${ARCH}。"

#. Type: boolean
#. Description
#. :sl4:
#: ../grub-installer.templates:15001
msgid ""
"It has interesting new features but is still experimental software for this "
"architecture. If you choose to install it, you should be prepared for "
"breakage, and have an idea on how to recover your system if it becomes "
"unbootable. You're advised not to try this in production environments."
msgstr ""
"它有很多新特性但是在此架构上仍然处理试验阶段。如果您选择安装它，您需要做好发"
"生损坏的准备，并且知晓系统不能启动时如何恢复。建议不要在生产环境中尝试。"

#. Type: text
#. Description
#. :sl1:
#: ../grub-installer.templates:16001
msgid "Installing GRUB boot loader"
msgstr "安装 GRUB 启动引导器"

#. Type: text
#. Description
#. :sl1:
#: ../grub-installer.templates:17001
msgid "Looking for other operating systems..."
msgstr "正在查找其它操作系统..."

#. Type: text
#. Description
#. :sl1:
#: ../grub-installer.templates:18001
msgid "Installing the '${GRUB}' package..."
msgstr "正在安装 '${GRUB}' 软件包..."

#. Type: text
#. Description
#. :sl1:
#: ../grub-installer.templates:19001
msgid "Determining GRUB boot device..."
msgstr "正在确定 GRUB 启动设备..."

#. Type: text
#. Description
#. :sl1:
#: ../grub-installer.templates:20001
msgid "Running \"grub-install ${BOOTDEV}\"..."
msgstr "运行 \"grub-install ${BOOTDEV}\"..."

#. Type: text
#. Description
#. :sl1:
#: ../grub-installer.templates:21001
msgid "Running \"update-grub\"..."
msgstr "正在运行 \"update-grub\"..."

#. Type: text
#. Description
#. :sl1:
#: ../grub-installer.templates:22001
msgid "Updating /etc/kernel-img.conf..."
msgstr "正在更新 /etc/kernel-img.conf..."

#. Type: text
#. Description
#. Main menu item
#. :sl1:
#: ../grub-installer.templates:23001
msgid "Install the GRUB boot loader on a hard disk"
msgstr "将 GRUB 安装至硬盘"

#. Type: text
#. Description
#. Rescue menu item
#. :sl2:
#: ../grub-installer.templates:24001
msgid "Reinstall GRUB boot loader"
msgstr "重新安装 GRUB 启动引导器"