# THIS FILE IS GENERATED AUTOMATICALLY FROM THE D-I PO MASTER FILES
# The master files can be found under packages/po/
#
# DO NOT MODIFY THIS FILE DIRECTLY: SUCH CHANGES WILL BE LOST
#
# Traditional Chinese messages for debian-installer.
# Copyright (C) 2003 Software in the Public Interest, Inc.
# This file is distributed under the same license as debian-installer.
#
msgid ""
msgstr ""
"Project-Id-Version: debian-installer\n"
"Report-Msgid-Bugs-To: grub-installer@packages.debian.org\n"
"POT-Creation-Date: 2011-07-30 22:49+0000\n"
"PO-Revision-Date: 2008-08-09 00:35+0800\n"
"Last-Translator: Tetralet <tetralet@gmail.com>\n"
"Language-Team: Debian-user in Chinese [Big5] <debian-chinese-big5@lists."
"debian.org>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#. Type: boolean
#. Description
#. :sl1:
#. Type: boolean
#. Description
#. :sl1:
#: ../grub-installer.templates:1001 ../grub-installer.templates:2001
msgid "Install the GRUB boot loader to the master boot record?"
msgstr "是否要將 GRUB 開機程式安裝至主要開機記錄 (MBR) 上？"

#. Type: boolean
#. Description
#. :sl1:
#: ../grub-installer.templates:1001
msgid ""
"The following other operating systems have been detected on this computer: "
"${OS_LIST}"
msgstr "以下列出的是在這台電腦上所偵測到的其它作業系統：${OS_LIST}"

#. Type: boolean
#. Description
#. :sl1:
#: ../grub-installer.templates:1001
msgid ""
"If all of your operating systems are listed above, then it should be safe to "
"install the boot loader to the master boot record of your first hard drive. "
"When your computer boots, you will be able to choose to load one of these "
"operating systems or your new system."
msgstr ""
"如果以上已列出了您電腦中所有的作業系統，那麼您應該可以放心得把開機程式安裝在"
"第一個硬碟的主要開機記錄 (MBR) 上。當您的電腦開機時，您可以選擇載入其中一種作"
"業系統，或是由您的新系統開機。"

#. Type: boolean
#. Description
#. :sl1:
#: ../grub-installer.templates:2001
msgid ""
"It seems that this new installation is the only operating system on this "
"computer. If so, it should be safe to install the GRUB boot loader to the "
"master boot record of your first hard drive."
msgstr ""
"看來目前所安裝的新系統是這台電腦中唯一的作業系統。若確是如此，那麼您應該可以"
"放心得把開機程式安裝在第一個硬碟的主要開機記錄 (MBR) 上。"

#. Type: boolean
#. Description
#. :sl1:
#: ../grub-installer.templates:2001
msgid ""
"Warning: If the installer failed to detect another operating system that is "
"present on your computer, modifying the master boot record will make that "
"operating system temporarily unbootable, though GRUB can be manually "
"configured later to boot it."
msgstr ""
"警告：如果安裝程式無法偵測到您的電腦上已存在的其它作業系統，修改主要開機記錄 "
"(MBR) 將會使得該作業系統暫時無法開機。然而，在事後還是可以藉由手動設定 GRUB "
"來啟動它。"

#. Type: boolean
#. Description
#. :sl3:
#: ../grub-installer.templates:3001
msgid "Install the GRUB boot loader to the Serial ATA RAID disk?"
msgstr "是否要將 GRUB 開機程式安裝至 Serial ATA RAID 硬碟上？"

#. Type: boolean
#. Description
#. :sl3:
#: ../grub-installer.templates:3001
msgid "Installation of GRUB on Serial ATA RAID is experimental."
msgstr "在 Serial ATA RAID 上安裝 GRUB 尚處於實驗階段。"

#. Type: boolean
#. Description
#. :sl3:
#: ../grub-installer.templates:3001
msgid ""
"GRUB is always installed to the master boot record (MBR) of the Serial ATA "
"RAID disk. It is also assumed that disk is listed as the first hard disk in "
"the boot order defined in the system's BIOS setup."
msgstr ""
"GRUB 必定會被安裝在 Serial ATA RAID 磁碟的主要開機記錄 (MBR) 上。同時也會假設"
"在系統 BIOS 設定的開機順序裡，這個磁碟是被列為第一個硬碟。"

#. Type: boolean
#. Description
#. :sl3:
#. Type: boolean
#. Description
#. :sl3:
#: ../grub-installer.templates:3001 ../grub-installer.templates:5001
msgid "The GRUB root device is: ${GRUBROOT}."
msgstr "GRUB 的 root 裝置是：${GRUBROOT}。"

#. Type: error
#. Description
#. :sl3:
#. Type: error
#. Description
#. :sl3:
#. Type: error
#. Description
#. :sl2:
#: ../grub-installer.templates:4001 ../grub-installer.templates:6001
#: ../grub-installer.templates:14001
msgid "Unable to configure GRUB"
msgstr "無法設定 GRUB"

#. Type: error
#. Description
#. :sl3:
#: ../grub-installer.templates:4001
msgid "An error occurred while setting up GRUB for your Serial ATA RAID disk."
msgstr "在替 Serial ATA RAID 磁碟設定 GRUB 時發生錯誤。"

#. Type: error
#. Description
#. :sl3:
#. Type: error
#. Description
#. :sl3:
#: ../grub-installer.templates:4001 ../grub-installer.templates:6001
msgid "The GRUB installation has been aborted."
msgstr "GBUB 的安裝已被中止。"

#. Type: boolean
#. Description
#. :sl3:
#: ../grub-installer.templates:5001
msgid "Install the GRUB boot loader to the multipath device?"
msgstr "是否要將 GRUB 開機程式安裝至 multipath 裝置上？"

#. Type: boolean
#. Description
#. :sl3:
#: ../grub-installer.templates:5001
msgid "Installation of GRUB on multipath is experimental."
msgstr "在 multipath 上安裝 GRUB 尚處於實驗階段。"

#. Type: boolean
#. Description
#. :sl3:
#: ../grub-installer.templates:5001
msgid ""
"GRUB is always installed to the master boot record (MBR) of the multipath "
"device. It is also assumed that the WWID of this device is selected as boot "
"device in the system's FibreChannel adapter BIOS."
msgstr ""
"GRUB 必定會被安裝在 multipath 磁碟的主要開機記錄 (MBR) 上。同時也會假設在系統"
"的 FibreChannel 介面卡上的 BIOS 裡，已將該裝置的 WWID 設定為開機磁碟。"

#. Type: error
#. Description
#. :sl3:
#: ../grub-installer.templates:6001
msgid "An error occurred while setting up GRUB for the multipath device."
msgstr "在替 multipath 磁碟設定 GRUB 時發生錯誤。"

#. Type: string
#. Description
#. :sl2:
#: ../grub-installer.templates:7001
msgid "Device for boot loader installation:"
msgstr "用來安裝開機程式的裝置："

#. Type: string
#. Description
#. :sl2:
#: ../grub-installer.templates:7001
msgid ""
"You need to make the newly installed system bootable, by installing the GRUB "
"boot loader on a bootable device. The usual way to do this is to install "
"GRUB on the master boot record of your first hard drive. If you prefer, you "
"can install GRUB elsewhere on the drive, or to another drive, or even to a "
"floppy."
msgstr ""
"必須把 GRUB 開機程式安裝至可開機裝置上，才能讓這個新安裝的系統能夠開機。一般"
"作法是將 GRUB 安裝至您第一顆硬碟的主要開機記錄 (MBR) 上。而或者，也可以依您喜"
"好將 GRUB 安裝至磁碟的其它地方，或安裝至另一顆磁碟上，或甚至也可以將它安裝至"
"磁碟片上。"

#. Type: string
#. Description
#. :sl2:
#: ../grub-installer.templates:7001
msgid ""
"The device should be specified as a device in /dev. Below are some "
"examples:\n"
" - \"/dev/sda\" will install GRUB to the master boot record of your first\n"
"   hard drive;\n"
" - \"/dev/sda2\" will use the second partition of your first hard drive;\n"
" - \"/dev/sdc5\" will use the first extended partition of your third hard\n"
"   drive;\n"
" - \"/dev/fd0\" will install GRUB to a floppy."
msgstr ""
"此應指定為 /dev 中之某個裝置。以下是一些例子：\n"
" - \"/dev/sda\" 會將 GRUB 安裝到您第一顆磁碟的主要開機記錄(MBR)；\n"
" - \"/dev/sda2\" 會使用您第一顆磁碟的第二個分割區；\n"
" - \"/dev/sdc5\" 會使用您第三顆磁碟的第一個延伸分割區；\n"
" - \"/dev/fd0\" 會將 GRUB 安裝到軟碟片。"

#. Type: password
#. Description
#. :sl2:
#: ../grub-installer.templates:8001
msgid "GRUB password:"
msgstr "GRUB 密碼："

#. Type: password
#. Description
#. :sl2:
#: ../grub-installer.templates:8001
msgid ""
"The GRUB boot loader offers many powerful interactive features, which could "
"be used to compromise your system if unauthorized users have access to the "
"machine when it is starting up. To defend against this, you may choose a "
"password which will be required before editing menu entries or entering the "
"GRUB command-line interface. By default, any user will still be able to "
"start any menu entry without entering the password."
msgstr ""
"GRUB 開機程式提供了很多強大的互動式功能，若在它啟動時有未經授權的使用者直接操"
"作您的機器，它可能會被利用來破壞您的系統。為了防止類似的情事發生，您可以設定"
"一個密碼，而在編輯選單上的項目或進入 GRUB 的命令列介面時則必須輸入這個密碼。"
"在預設上，所有的使用者仍然不需要輸入這個密碼就可以啟動選單上的任何項目。"

#. Type: password
#. Description
#. :sl2:
#: ../grub-installer.templates:8001
msgid "If you do not wish to set a GRUB password, leave this field blank."
msgstr "如果您不想設定 GRUB 的密碼，請直接留白。"

#. Type: password
#. Description
#. :sl2:
#: ../grub-installer.templates:9001
msgid "Re-enter password to verify:"
msgstr "請再次輸入密碼以進行確認："

#. Type: password
#. Description
#. :sl2:
#: ../grub-installer.templates:9001
msgid ""
"Please enter the same GRUB password again to verify that you have typed it "
"correctly."
msgstr "請再次輸入相同的 GRUB 密碼以確認您是否正確鍵入。"

#. Type: error
#. Description
#. :sl2:
#: ../grub-installer.templates:10001
msgid "Password input error"
msgstr "密碼輸入錯誤"

#. Type: error
#. Description
#. :sl2:
#: ../grub-installer.templates:10001
msgid "The two passwords you entered were not the same. Please try again."
msgstr "您所輸入的兩個密碼並不相同。請再次輸入密碼。"

#. Type: error
#. Description
#. :sl2:
#: ../grub-installer.templates:12001
msgid "GRUB installation failed"
msgstr "GRUB 的安裝失敗了"

#. Type: error
#. Description
#. :sl2:
#: ../grub-installer.templates:12001
msgid ""
"The '${GRUB}' package failed to install into /target/. Without the GRUB boot "
"loader, the installed system will not boot."
msgstr ""
"無法將 '${GRUB}' 套件安裝至 /target/。若沒有 GRUB 開機程式，這個安裝好的系統"
"將無法開機。"

#. Type: error
#. Description
#. :sl2:
#: ../grub-installer.templates:13001
msgid "Unable to install GRUB in ${BOOTDEV}"
msgstr "無法將 GRUB 安裝至 ${BOOTDEV}"

#. Type: error
#. Description
#. :sl2:
#: ../grub-installer.templates:13001
msgid "Executing 'grub-install ${BOOTDEV}' failed."
msgstr "在執行 grub-install ${BOOTDEV} 時失敗了。"

#. Type: error
#. Description
#. :sl2:
#. Type: error
#. Description
#. :sl2:
#: ../grub-installer.templates:13001 ../grub-installer.templates:14001
msgid "This is a fatal error."
msgstr "這是一個嚴重錯誤。"

#. Type: error
#. Description
#. :sl2:
#: ../grub-installer.templates:14001
msgid "Executing 'update-grub' failed."
msgstr "在執行 update-grub 時失敗了。"

#. Type: boolean
#. Description
#. :sl4:
#: ../grub-installer.templates:15001
#, fuzzy
msgid "Install GRUB?"
msgstr "安裝 GRUB 開機程式"

#. Type: boolean
#. Description
#. :sl4:
#: ../grub-installer.templates:15001
msgid ""
"GRUB 2 is the next generation of GNU GRUB, the boot loader that is commonly "
"used on i386/amd64 PCs. It is now also available for ${ARCH}."
msgstr ""

#. Type: boolean
#. Description
#. :sl4:
#: ../grub-installer.templates:15001
msgid ""
"It has interesting new features but is still experimental software for this "
"architecture. If you choose to install it, you should be prepared for "
"breakage, and have an idea on how to recover your system if it becomes "
"unbootable. You're advised not to try this in production environments."
msgstr ""

#. Type: text
#. Description
#. :sl1:
#: ../grub-installer.templates:16001
msgid "Installing GRUB boot loader"
msgstr "安裝 GRUB 開機程式"

#. Type: text
#. Description
#. :sl1:
#: ../grub-installer.templates:17001
msgid "Looking for other operating systems..."
msgstr "正在尋找其它的作業系統..."

#. Type: text
#. Description
#. :sl1:
#: ../grub-installer.templates:18001
msgid "Installing the '${GRUB}' package..."
msgstr "正在安裝 '${GRUB}' 套件..."

#. Type: text
#. Description
#. :sl1:
#: ../grub-installer.templates:19001
msgid "Determining GRUB boot device..."
msgstr "正在決定 GRUB 的開機裝置..."

#. Type: text
#. Description
#. :sl1:
#: ../grub-installer.templates:20001
msgid "Running \"grub-install ${BOOTDEV}\"..."
msgstr "正在執行 \"grub-install ${BOOTDEV}\"..."

#. Type: text
#. Description
#. :sl1:
#: ../grub-installer.templates:21001
msgid "Running \"update-grub\"..."
msgstr "正在執行 \"update-grub\"..."

#. Type: text
#. Description
#. :sl1:
#: ../grub-installer.templates:22001
msgid "Updating /etc/kernel-img.conf..."
msgstr "正在更新 /etc/kernel-img.conf..."

#. Type: text
#. Description
#. Main menu item
#. :sl1:
#: ../grub-installer.templates:23001
msgid "Install the GRUB boot loader on a hard disk"
msgstr "將 GRUB 開機程式安裝至硬碟上"

#. Type: text
#. Description
#. Rescue menu item
#. :sl2:
#: ../grub-installer.templates:24001
msgid "Reinstall GRUB boot loader"
msgstr "重新安裝 GRUB 開機程式"