# THIS FILE IS GENERATED AUTOMATICALLY FROM THE D-I PO MASTER FILES
# The master files can be found under packages/po/
#
# DO NOT MODIFY THIS FILE DIRECTLY: SUCH CHANGES WILL BE LOST
#
# Estonian translation of Debian-installer
#
# This translation is released under the same licence as the debian-installer.
#
# Siim Põder <siim@p6drad-teel.net>, 2007.
# Mattias Põldaru <mahfiaz@gmail.com>, 2009-2010.
#
# Thanks to following Ubuntu Translators for review and fixes:
#     Laur Mõtus
#     Heiki Nooremäe
#     tabbernuk
#
msgid ""
msgstr ""
"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
"POT-Creation-Date: 2008-01-26 07:33+0000\n"
"PO-Revision-Date: 2010-07-07 14:27+0300\n"
"Last-Translator: Mattias Põldaru <mahfiaz@gmail.com>\n"
"Language-Team: Eesti\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:1001
msgid "No partitions found"
msgstr "Ühtki partitsiooni ei leitud"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:1001
msgid ""
"No partitions were found in your system. You may need to partition your hard "
"drives or load additional kernel modules."
msgstr ""
"Su süsteemist ei leitud ühtki partitsiooni. Võib juhtuda, et pead oma "
"kõvakettaid partitsioneerima või kerneli mooduleid laadima."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:2001
msgid "No file systems found"
msgstr "Ühtki failisüsteemi ei leitud"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:2001
msgid ""
"No usable file systems were found. You may need to load additional kernel "
"modules."
msgstr ""
"Ei leitud ühtki kasutuskõlblikku failisüsteemi. Võib-olla pead lisaks veel "
"mõningad kerneli moodulid laadima."

#. Type: select
#. Choices
#. :sl5:
#: ../partconf.templates:3001
msgid "Finish"
msgstr "Lõpetamine"

#. Type: select
#. Choices
#. :sl5:
#: ../partconf.templates:3001
msgid "Abort"
msgstr "Katkesta"

#. Type: select
#. Description
#: ../partconf.templates:3002
msgid "Select a partition"
msgstr "Vali partitsioon"

#. Type: select
#. Description
#: ../partconf.templates:3002
msgid ""
"These are the partitions that were detected in your system. Please select a "
"partition to configure. No actual changes will be made until you select "
"\"Finish\". If you select \"Abort\", no changes will be made."
msgstr ""
"Sinu süsteemist leiti need partitsioonid. Vali partitsioon, mida seadistada. "
"Enne, kui sa vajutad \"Lõpeta\", ei sooritata ühtki muudatust. Kui valid "
"\"Katkesta\" jäetakse muudatused sooritamata."

#. Type: select
#. Description
#: ../partconf.templates:3002
msgid ""
"The information shown is, in order: device name, size, file system, and "
"mount point."
msgstr ""
"Informatsioon on järjekorras: seadme nimi, suurus, failisüsteem ja "
"haakepunkt."

#. Type: select
#. Choices
#. :sl5:
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#: ../partconf.templates:4001
msgid "Leave the file system intact"
msgstr "Jäta failisüsteem puutumata"

#. Type: select
#. Choices
#. :sl5:
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. Type: select
#. Choices
#. :sl5:
#. Note to translators : Please keep your translations of each choice
#. (separated by commas)
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#: ../partconf.templates:4001 ../partconf.templates:5001
msgid "Create swap space"
msgstr "Loo saaleala"

#. Type: select
#. Description
#. :sl5:
#. Type: select
#. Description
#. :sl5:
#: ../partconf.templates:4002 ../partconf.templates:5002
msgid "Action on ${PARTITION}:"
msgstr "Tegevus ${PARTITION} peal:"

#. Type: select
#. Description
#. :sl5:
#: ../partconf.templates:4002
msgid ""
"This partition seems to already have a file system (${FSTYPE}). You can "
"choose to leave this file system intact, create a new file system, or create "
"swap space."
msgstr ""
"Sellel partitsioonil juba on failisüsteem (${FSTYPE}). Võid valida, kas "
"jätta failisüsteem puutumata, luua uus failisüsteem või luua saaleala."

#. Type: select
#. Description
#. :sl5:
#: ../partconf.templates:5002
msgid ""
"This partition does not seem to have a file system. You can create a file "
"system or swap space on it."
msgstr ""
"Tundub, et partitsioonil pole failisüsteemi. Võid sinna luua failisüsteemi "
"või saaleala."

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of each choice
#. (separated by commas)
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. :sl5:
#. "it" is a partition
#: ../partconf.templates:6001
msgid "Don't mount it"
msgstr "Jäta haakimata"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of each choice
#. (separated by commas)
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. :sl5:
#. What's to be "entered manually" is a mount point
#: ../partconf.templates:6001
msgid "Enter manually"
msgstr "Sisesta käsitsi"

#. Type: select
#. Description
#. :sl5:
#. Type: string
#. Description
#. :sl5:
#: ../partconf.templates:6002 ../partconf.templates:7001
msgid "Mount point for ${PARTITION}:"
msgstr "${PARTITION} haakepunkt:"

#. Type: select
#. Description
#. :sl5:
#: ../partconf.templates:6002
msgid ""
"When a partition is mounted, it is available to the users of the system. You "
"always need a root (\"/\") partition, and it's often good to have a separate "
"partition for /home."
msgstr ""
"Kui partitsioon haagitakse külge, saab see süsteemi kasutajatele "
"kättesaadavaks. Igal juhul on vaja juurpartitsiooni (\"/\") ning tihtilugu "
"on kasulik omada eraldi /home partitsiooni"

#. Type: string
#. Description
#. :sl5:
#: ../partconf.templates:7001
msgid "Please enter where the partition should be mounted."
msgstr "Palun sisesta, kuhu partitsioon haakida."

#. Type: boolean
#. Description
#. :sl5:
#: ../partconf.templates:8001
msgid "Do you want to unmount the partitions so you can make changes?"
msgstr ""
"Kas soovid partitsioonid lahti haakida, et neisse muudatusi sisse viia?"

#. Type: boolean
#. Description
#. :sl5:
#: ../partconf.templates:8001
msgid ""
"Since the partitions have already been mounted, you cannot do any changes."
msgstr "Kuna partitsioonid on juba külge haagitud, ei saa neid enam muuta."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:9001
msgid "Failed to unmount partitions"
msgstr "Partitsioonide lahtihaakimine nurjus"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:9001
msgid "An unexpected error occurred while unmounting the partitions."
msgstr "Partitsioonide lahtihaakimisel esines ootamatu viga"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:9001
msgid "The partition configuration process has been aborted."
msgstr "Partitsioonide seadistamine on katkestatud."

#. Type: text
#. Description
#. :sl5:
#: ../partconf.templates:10001
#, no-c-format
msgid "Create %s file system"
msgstr "Loo %s failisüsteem"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:11001
msgid "No root partition (/)"
msgstr "Pole juurpartitsiooni (/)"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:11001
msgid ""
"You need a root partition. Please assign a partition to the root mount point "
"before continuing."
msgstr ""
"Sa vajad juurpartitsiooni. Palun määra enne jätkamist juure haakepunktile "
"partitsioon."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:12001
msgid "Partition assigned to ${MOUNT}"
msgstr "Partitsioon määratud ${MOUNT} külge"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:12001
msgid "Mounting a partition on ${MOUNT} makes no sense. Please change this."
msgstr "Partitsiooni ${MOUNT} külge haakimine ei oma mõtet. Palun muuda seda."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:13001
msgid "Several partitions assigned to ${MOUNT}"
msgstr "${MOUNT} külge on määratut mitu partitsiooni"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:13001
msgid ""
"You cannot assign several partitions to the same mount point. Please change "
"all but one of them."
msgstr ""
"Ühe haakepunkti küljes ei saa olla mitut partitsiooni. Palun muuda neid, "
"jättes vaid alles ühe."

#. Type: boolean
#. Description
#. :sl5:
#: ../partconf.templates:14001
msgid "Ready to create file systems and mount partitions?"
msgstr "Kas oled valmis failisüsteeme looma ja partitsioone külge haakima?"

#. Type: boolean
#. Description
#. :sl5:
#: ../partconf.templates:14001
msgid "File systems will be created and partitions mounted."
msgstr "Luuakse failisüsteeme ja haagitakse partitsioone."

#. Type: boolean
#. Description
#. :sl5:
#: ../partconf.templates:14001
msgid ""
"WARNING: This will destroy all data on the partitions you have assigned file "
"systems to."
msgstr ""
"HOIATUS: See hävitab kõik andmed partitsioonidel, kuhu oled failisüsteemid "
"määranud."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:15001
msgid "Failed to create swap space on ${PARTITION}"
msgstr "${PARTITION} peale saaleala loomine nurjus."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:15001
msgid "An error occurred when the swap space was created on ${PARTITION}."
msgstr "${PARTITION} peale saaleala loomise käigus ilmnes viga."

#. Type: error
#. Description
#. :sl5:
#. Type: error
#. Description
#. :sl5:
#. Type: error
#. Description
#. :sl5:
#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:15001 ../partconf.templates:16001
#: ../partconf.templates:17001 ../partconf.templates:18001
msgid ""
"Please check the error log on the third console or /var/log/messages for "
"more information."
msgstr ""
"Lisateabe saamiseks uuri vealogi kolmandal konsoolil (ALT-F3) või vaata /var/"
"log/messages."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:16001
msgid "Failed to activate the swap space on ${PARTITION}"
msgstr "${PARTITION} pealse saaleala aktiveerimine nurjus"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:16001
msgid "An error occurred when the swap space on ${PARTITION} was activated."
msgstr "${PARTITION} pealse saaleala aktiveerimise käigus ilmnes viga."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:17001
msgid "Failed to create ${FS} file system on ${PARTITION}"
msgstr "${PARTITION} peale failisüsteemi ${FS} loomine nurjus"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:17001
msgid ""
"An error occurred when the ${FS} file system was created on ${PARTITION}."
msgstr "${PARTITION} peale failisüsteemi ${FS} loomise käigus ilmnes viga."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:18001
msgid "Failed to mount ${PARTITION} on ${MOUNT}"
msgstr "Partitsiooni ${PARTITION} haakepunkti ${MOUNT} külge haakimine nurjus"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:18001
msgid "An error occurred when ${PARTITION} was mounted on ${MOUNT}."
msgstr ""
"${PARTITION} pealse failisüsteemi ${MOUNT} haakimise käigus ilmnes viga."

#. Type: text
#. Description
#. Main menu item
#. :sl5:
#: ../partconf.templates:19001
msgid "Configure and mount partitions"
msgstr "Partitsioonide seadistamine ja haakimine"