# THIS FILE IS GENERATED AUTOMATICALLY FROM THE D-I PO MASTER FILES
# The master files can be found under packages/po/
#
# DO NOT MODIFY THIS FILE DIRECTLY: SUCH CHANGES WILL BE LOST
#
# Traditional Chinese messages for debian-installer.
# Copyright (C) 2003 Software in the Public Interest, Inc.
# This file is distributed under the same license as debian-installer.
#
msgid ""
msgstr ""
"Project-Id-Version: debian-installer\n"
"Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
"POT-Creation-Date: 2008-01-26 07:33+0000\n"
"PO-Revision-Date: 2008-08-09 00:35+0800\n"
"Last-Translator: Tetralet <tetralet@gmail.com>\n"
"Language-Team: Debian-user in Chinese [Big5] <debian-chinese-big5@lists."
"debian.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: \n"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:1001
msgid "No partitions found"
msgstr "找不到磁碟分割區"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:1001
msgid ""
"No partitions were found in your system. You may need to partition your hard "
"drives or load additional kernel modules."
msgstr ""
"在系統中找不到磁碟分割區。您可能需要進行硬碟分割或再載入些額外的 Kernel 模"
"組。"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:2001
msgid "No file systems found"
msgstr "找不到檔案系統"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:2001
msgid ""
"No usable file systems were found. You may need to load additional kernel "
"modules."
msgstr "找不到可用的檔案系統。您可能需要再載入些額外的 Kernel 模組。"

#. Type: select
#. Choices
#. :sl5:
#: ../partconf.templates:3001
msgid "Finish"
msgstr "完成"

#. Type: select
#. Choices
#. :sl5:
#: ../partconf.templates:3001
msgid "Abort"
msgstr "放棄"

#. Type: select
#. Description
#: ../partconf.templates:3002
msgid "Select a partition"
msgstr "選擇一個磁碟分割區"

#. Type: select
#. Description
#: ../partconf.templates:3002
msgid ""
"These are the partitions that were detected in your system. Please select a "
"partition to configure. No actual changes will be made until you select "
"\"Finish\". If you select \"Abort\", no changes will be made."
msgstr ""
"這是在您的系統中被偵測到的磁碟分割區。請選擇一個分割區來進行設定。在您選擇"
"【結束】之前任何修改都不會真正得生效。如果選擇了【中止】，也不會進行任何的變"
"更。"

#. Type: select
#. Description
#: ../partconf.templates:3002
msgid ""
"The information shown is, in order: device name, size, file system, and "
"mount point."
msgstr "所顯示的資訊依次是：裝置名稱、大小、檔案系統 及 掛載點。"

#. Type: select
#. Choices
#. :sl5:
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#: ../partconf.templates:4001
msgid "Leave the file system intact"
msgstr "保留該檔案系統的原始內容"

#. Type: select
#. Choices
#. :sl5:
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. Type: select
#. Choices
#. :sl5:
#. Note to translators : Please keep your translations of each choice
#. (separated by commas)
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#: ../partconf.templates:4001 ../partconf.templates:5001
msgid "Create swap space"
msgstr "建立置換空間"

#. Type: select
#. Description
#. :sl5:
#. Type: select
#. Description
#. :sl5:
#: ../partconf.templates:4002 ../partconf.templates:5002
msgid "Action on ${PARTITION}:"
msgstr "要在 ${PARTITION} 上進行的動作："

#. Type: select
#. Description
#. :sl5:
#: ../partconf.templates:4002
msgid ""
"This partition seems to already have a file system (${FSTYPE}). You can "
"choose to leave this file system intact, create a new file system, or create "
"swap space."
msgstr ""
"此分割區中似乎已經包含了檔案系統 (${FSTYPE})。您可以選擇保留該檔案系統的原始"
"內容、建立新的檔案系統、或是建立置換空間。"

#. Type: select
#. Description
#. :sl5:
#: ../partconf.templates:5002
msgid ""
"This partition does not seem to have a file system. You can create a file "
"system or swap space on it."
msgstr ""
"這個磁碟分割區上似乎沒有任何檔案系統。您可以在上面建立檔案系統或置換空間。"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of each choice
#. (separated by commas)
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. :sl5:
#. "it" is a partition
#: ../partconf.templates:6001
msgid "Don't mount it"
msgstr "不進行掛載"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of each choice
#. (separated by commas)
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. :sl5:
#. What's to be "entered manually" is a mount point
#: ../partconf.templates:6001
msgid "Enter manually"
msgstr "手動輸入"

#. Type: select
#. Description
#. :sl5:
#. Type: string
#. Description
#. :sl5:
#: ../partconf.templates:6002 ../partconf.templates:7001
msgid "Mount point for ${PARTITION}:"
msgstr "${PARTITION} 的掛載點："

#. Type: select
#. Description
#. :sl5:
#: ../partconf.templates:6002
msgid ""
"When a partition is mounted, it is available to the users of the system. You "
"always need a root (\"/\") partition, and it's often good to have a separate "
"partition for /home."
msgstr ""
"在磁碟分割區被掛載之後，系統的使用者才能存取它。Root (\"/\") 分割區是不可或缺"
"的，並且最好將 /home 劃分為獨立的磁碟分割區。"

#. Type: string
#. Description
#. :sl5:
#: ../partconf.templates:7001
msgid "Please enter where the partition should be mounted."
msgstr "請輸入磁碟分割區應該掛載於哪個位置。"

#. Type: boolean
#. Description
#. :sl5:
#: ../partconf.templates:8001
msgid "Do you want to unmount the partitions so you can make changes?"
msgstr "為了能夠進行變更，您是否要暫時卸載該分割區？"

#. Type: boolean
#. Description
#. :sl5:
#: ../partconf.templates:8001
msgid ""
"Since the partitions have already been mounted, you cannot do any changes."
msgstr "由於磁碟分割區已經被掛載了，無法進行任何變更。"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:9001
msgid "Failed to unmount partitions"
msgstr "無法卸載磁碟分割區"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:9001
msgid "An unexpected error occurred while unmounting the partitions."
msgstr "在卸載分割區時發生了預期之外的錯誤。"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:9001
msgid "The partition configuration process has been aborted."
msgstr "分割區設定程序已被中止。"

#. Type: text
#. Description
#. :sl5:
#: ../partconf.templates:10001
#, no-c-format
msgid "Create %s file system"
msgstr "建立 %s 檔案系統"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:11001
msgid "No root partition (/)"
msgstr "沒有 root 分割區 (/)"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:11001
msgid ""
"You need a root partition. Please assign a partition to the root mount point "
"before continuing."
msgstr ""
"缺少了 root 分割區。在繼續進行之前請將一個磁碟分割區指派為 root 的掛載點。"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:12001
msgid "Partition assigned to ${MOUNT}"
msgstr "將磁碟分割區指派為 ${MOUNT}"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:12001
msgid "Mounting a partition on ${MOUNT} makes no sense. Please change this."
msgstr "不應當將磁碟分割區掛載至 ${MOUNT}。請修正。"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:13001
msgid "Several partitions assigned to ${MOUNT}"
msgstr "有多個磁碟分割區同時被指派為 ${MOUNT}"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:13001
msgid ""
"You cannot assign several partitions to the same mount point. Please change "
"all but one of them."
msgstr "不能將多個磁碟分割區指派至同一個掛載點。請修改它們，只留下一個。"

#. Type: boolean
#. Description
#. :sl5:
#: ../partconf.templates:14001
msgid "Ready to create file systems and mount partitions?"
msgstr "是否已準備好要建立檔案系統並掛載磁碟分割區了？"

#. Type: boolean
#. Description
#. :sl5:
#: ../partconf.templates:14001
msgid "File systems will be created and partitions mounted."
msgstr "將要進行檔案系統的建立，並掛載磁碟分割區。"

#. Type: boolean
#. Description
#. :sl5:
#: ../partconf.templates:14001
msgid ""
"WARNING: This will destroy all data on the partitions you have assigned file "
"systems to."
msgstr "[警告]：這樣會把要建立檔案系統的磁碟分割區上的所有的資料給完全清除掉。"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:15001
msgid "Failed to create swap space on ${PARTITION}"
msgstr "無法在 ${PARTITION} 上建立置換空間"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:15001
msgid "An error occurred when the swap space was created on ${PARTITION}."
msgstr "在 ${PARTITION} 上建立置換空間時發生錯誤。"

#. Type: error
#. Description
#. :sl5:
#. Type: error
#. Description
#. :sl5:
#. Type: error
#. Description
#. :sl5:
#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:15001 ../partconf.templates:16001
#: ../partconf.templates:17001 ../partconf.templates:18001
msgid ""
"Please check the error log on the third console or /var/log/messages for "
"more information."
msgstr "請查看第三個主控台中的錯誤 Log 或是 /var/log/messages 來獲得更多訊息。"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:16001
msgid "Failed to activate the swap space on ${PARTITION}"
msgstr "無法啟動 ${PARTITION} 上的置換空間"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:16001
msgid "An error occurred when the swap space on ${PARTITION} was activated."
msgstr "在啟動 ${PARTITION} 上的置換空間時發生錯誤。"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:17001
msgid "Failed to create ${FS} file system on ${PARTITION}"
msgstr "無法在 ${PARTITION} 上建立 ${FS} 檔案系統"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:17001
msgid ""
"An error occurred when the ${FS} file system was created on ${PARTITION}."
msgstr "在 ${PARTITION} 上建立 ${FS} 檔案系統時發生錯誤。"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:18001
msgid "Failed to mount ${PARTITION} on ${MOUNT}"
msgstr "無法將 ${PARTITION} 掛載至 ${MOUNT}"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:18001
msgid "An error occurred when ${PARTITION} was mounted on ${MOUNT}."
msgstr "在將 ${PARTITION} 掛載至 ${MOUNT} 時發生錯誤。"

#. Type: text
#. Description
#. Main menu item
#. :sl5:
#: ../partconf.templates:19001
msgid "Configure and mount partitions"
msgstr "設定並掛載磁碟分割區"