# THIS FILE IS GENERATED AUTOMATICALLY FROM THE D-I PO MASTER FILES
# The master files can be found under packages/po/
#
# DO NOT MODIFY THIS FILE DIRECTLY: SUCH CHANGES WILL BE LOST
#
# translation of debian-installer_packages_po_sublevel1_da.po to
# Danish messages for debian-installer.
# This file is distributed under the same license as debian-installer.
# Mads Bille Lundby <lundbymads@gmail.com, 2009.
# Henrik Christian Grove <debian@3001.dk>, 2008.
# Jesper Dahl Nyerup <debian@jespernyerup.dk>, 2008.
# Jacob Sparre Andersen <jacob@jacob-sparre.dk>, 2008, 2010.
# Claus Hindsgaul <claus.hindsgaul@gmail.com>, 2004-2007.
# Reviewed 2007 by Niels Rasmussen
#
# Volume er oversat til diskenhed. Ret hvis Dansk-gruppen finder en anbefaling.
#
msgid ""
msgstr ""
"Project-Id-Version: debian-installer_packages_po_sublevel1_da\n"
"Report-Msgid-Bugs-To: partman-base@packages.debian.org\n"
"POT-Creation-Date: 2011-07-27 22:47+0000\n"
"PO-Revision-Date: 2010-08-05 10:48+0200\n"
"Last-Translator: Jacob Sparre Andersen <jacob@jacob-sparre.dk>\n"
"Language-Team: Danish <debian-l10n-danish@lists.debian.org>\n"
"Language: da\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"

#. Type: text
#. Description
#. :sl1:
#: ../partman-base.templates:1001
msgid "Starting up the partitioner"
msgstr "Starter partitioneringsprogrammet op"

#. Type: text
#. Description
#. :sl1:
#. Type: text
#. Description
#. :sl2:
#: ../partman-base.templates:2001 ../partman-base.templates:25001
msgid "Please wait..."
msgstr "Vent venligst..."

#. Type: text
#. Description
#. :sl1:
#: ../partman-base.templates:3001
msgid "Scanning disks..."
msgstr "Skanner diske..."

#. Type: text
#. Description
#. :sl1:
#: ../partman-base.templates:4001
msgid "Detecting file systems..."
msgstr "Finder filsystemer..."

#. Type: error
#. Description
#. :sl2:
#: ../partman-base.templates:5001
msgid "Device in use"
msgstr "Enheden er i brug"

#. Type: error
#. Description
#. :sl2:
#: ../partman-base.templates:5001
msgid ""
"No modifications can be made to the device ${DEVICE} for the following "
"reasons:"
msgstr ""
"Der kan ikke gennemføres ændringer på enheden ${DEVICE} af følgende årsager:"

#. Type: error
#. Description
#. :sl2:
#: ../partman-base.templates:6001
msgid "Partition in use"
msgstr "Partitionen er i brug"

#. Type: error
#. Description
#. :sl2:
#. This should be translated as "partition *number* ${PARTITION}"
#. In short, ${PARTITION} will indeed contain the partition
#. NUMBER and not the partition NAME
#: ../partman-base.templates:6001
msgid ""
"No modifications can be made to the partition #${PARTITION} of device "
"${DEVICE} for the following reasons:"
msgstr ""
"Der kan ikke gennemføres ændringer på partition #${PARTITION} på enheden "
"${DEVICE} af følgende årsager:"

#. Type: select
#. Description
#. :sl1:
#: ../partman-base.templates:9001
msgid ""
"This is an overview of your currently configured partitions and mount "
"points. Select a partition to modify its settings (file system, mount point, "
"etc.), a free space to create partitions, or a device to initialize its "
"partition table."
msgstr ""
"Dette er en oversigt over de partitioner og monteringspunkter, der er sat "
"op. Vælg en partition for at ændre dennes indstillinger (filsystem, "
"monteringspunkt o.s.v.), et frit område for at oprette partitioner eller en "
"enhed for at initialisere dens partitionstabel."

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-base.templates:10001
msgid "Continue with the installation?"
msgstr "Fortsæt installationen?"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-base.templates:10001
msgid ""
"No partition table changes and no creation of file systems have been planned."
msgstr "Ingen partitionstabeller og ingen nye filsystemer er blevet planlagt."

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-base.templates:10001
msgid ""
"If you plan on using already created file systems, be aware that existing "
"files may prevent the successful installation of the base system."
msgstr ""
"Hvis du regner med at bruge et allerede oprettet filsystem, skal du være "
"klar over at eksisterende filer muligvis kan hindre installationen af "
"basissystemet."

#. Type: boolean
#. Description
#. :sl1:
#. Type: boolean
#. Description
#. :sl1:
#: ../partman-base.templates:11001 ../partman-base.templates:12001
msgid "Write the changes to disks?"
msgstr "Skriv ændringerne til diskene?"

#. Type: boolean
#. Description
#. :sl1:
#. Type: boolean
#. Description
#. :sl1:
#: ../partman-base.templates:11001 ../partman-base.templates:12001
msgid ""
"If you continue, the changes listed below will be written to the disks. "
"Otherwise, you will be able to make further changes manually."
msgstr ""
"Hvis du fortsætter, vil alle nedenstående ændringer blive skrevet til "
"diskene. Ellers vil du manuelt kunne foretage yderligere ændringer."

#. Type: boolean
#. Description
#. :sl1:
#: ../partman-base.templates:11001
msgid ""
"WARNING: This will destroy all data on any partitions you have removed as "
"well as on the partitions that are going to be formatted."
msgstr ""
"ADVARSEL: Dette vil ødelægge alle data enhver partition, du har fjernet "
"såvel som på de partitioner, du har valgt at formatere."

#. Type: text
#. Description
#. :sl2:
#: ../partman-base.templates:13001
msgid "The following partitions are going to be formatted:"
msgstr "Følgende partitioner vil blive formateret:"

#. Type: text
#. Description
#. :sl2:
#. for example: "partition #6 of IDE0 master as ext3 journaling file system"
#: ../partman-base.templates:14001
msgid "partition #${PARTITION} of ${DEVICE} as ${TYPE}"
msgstr "partition #${PARTITION} på ${DEVICE} som ${TYPE}"

#. Type: text
#. Description
#. :sl2:
#. for devices which have no partitions
#. for example: "LVM VG Debian, LV Root as ext3 journaling file system"
#: ../partman-base.templates:15001
msgid "${DEVICE} as ${TYPE}"
msgstr "${DEVICE} som ${TYPE}"

#. Type: text
#. Description
#. :sl2:
#: ../partman-base.templates:16001
msgid "The partition tables of the following devices are changed:"
msgstr "Partitionstabellerne på følgende enheder er ændret:"

#. Type: select
#. Description
#. :sl2:
#: ../partman-base.templates:17001
msgid "What to do with this device:"
msgstr "Hvad skal jeg gøre med denne enhed:"

#. Type: select
#. Description
#. :sl2:
#: ../partman-base.templates:18001
msgid "How to use this free space:"
msgstr "Hvordan skal jeg bruge denne frie plads:"

#. Type: select
#. Description
#. :sl2:
#: ../partman-base.templates:19001
msgid "Partition settings:"
msgstr "Partitionsindstillinger:"

#. Type: select
#. Description
#. :sl2:
#: ../partman-base.templates:19001
msgid ""
"You are editing partition #${PARTITION} of ${DEVICE}. ${OTHERINFO} "
"${DESTROYED}"
msgstr ""
"Du redigerer nu partitionen #${PARTITION} på ${DEVICE}. ${OTHERINFO} "
"${DESTROYED}"

#. Type: text
#. Description
#. :sl2:
#: ../partman-base.templates:20001
msgid "This partition is formatted with the ${FILESYSTEM}."
msgstr "Denne partition er formateret med ${FILESYSTEM}."

#. Type: text
#. Description
#. :sl2:
#: ../partman-base.templates:21001
msgid "No existing file system was detected in this partition."
msgstr "Det blev ikke fundet noget eksisterende filsystem på denne partition."

#. Type: text
#. Description
#. :sl2:
#: ../partman-base.templates:22001
msgid "All data in it WILL BE DESTROYED!"
msgstr "Alle data i den VIL BLIVE ØDELAGT!"

#. Type: note
#. Description
#. :sl2:
#: ../partman-base.templates:23001
msgid "The partition starts from ${FROMCHS} and ends at ${TOCHS}."
msgstr "Partitionen starter på ${FROMCHS} og ender på ${TOCHS}."

#. Type: note
#. Description
#. :sl2:
#: ../partman-base.templates:24001
msgid "The free space starts from ${FROMCHS} and ends at ${TOCHS}."
msgstr "Den fri plads starter på ${FROMCHS} og ender på ${TOCHS}."

#. Type: text
#. Description
#. :sl1:
#: ../partman-base.templates:26001
msgid "Partitions formatting"
msgstr "Formatering af partitioner"

#. Type: text
#. Description
#. :sl1:
#: ../partman-base.templates:27001
msgid "Processing..."
msgstr "Arbejder..."

#. Type: text
#. Description
#. :sl2:
#. Type: text
#. Description
#. :sl2:
#: ../partman-base.templates:29001 ../partman-base.templates:33001
msgid "Show Cylinder/Head/Sector information"
msgstr "Vis cylinder/hoved/sektor-oplysninger"

#. Type: text
#. Description
#. :sl2:
#: ../partman-base.templates:30001
msgid "Done setting up the partition"
msgstr "Færdig med at sætte partitionen op"

#. Type: text
#. Description
#. :sl1:
#: ../partman-base.templates:31001
msgid "Finish partitioning and write changes to disk"
msgstr "Afslut partitioneringen og skriv ændringerne til disken"

#. Type: text
#. Description
#. :sl1:
#: ../partman-base.templates:32001
msgid "Undo changes to partitions"
msgstr "Fortryd ændringerne i partitionerne"

#. Type: text
#. Description
#. :sl2:
#: ../partman-base.templates:34001
#, no-c-format
msgid "Dump partition info in %s"
msgstr "Gem partitionsoplysninger i %s"

#. Type: text
#. Description
#. Keep short
#. :sl1:
#: ../partman-base.templates:35001
msgid "FREE SPACE"
msgstr "FRI PLADS"

#. Type: text
#. Description
#. "unusable free space".  No more than 8 symbols.
#. :sl1:
#: ../partman-base.templates:36001
msgid "unusable"
msgstr "ubrugelig"

#. Type: text
#. Description
#. "primary partition".  No more than 8 symbols.
#. :sl1:
#: ../partman-base.templates:37001
msgid "primary"
msgstr "primær"

#. Type: text
#. Description
#. "logical partition".  No more than 8 symbols.
#. :sl1:
#: ../partman-base.templates:38001
msgid "logical"
msgstr "logisk"

#. Type: text
#. Description
#. "primary or logical".  No more than 8 symbols.
#. :sl1:
#: ../partman-base.templates:39001
msgid "pri/log"
msgstr "pri/log"

#. Type: text
#. Description
#. How to print the partition numbers in your language
#. Examples:
#. %s.
#. No %s
#. N. %s
#. :sl1:
#: ../partman-base.templates:40001
#, no-c-format
msgid "#%s"
msgstr "Nr. %s"

#. Type: text
#. Description
#. For example ATA1 (ad0)
#. :sl1:
#: ../partman-base.templates:41001
#, no-c-format
msgid "ATA%s (%s)"
msgstr "ATA%s (%s)"

#. Type: text
#. Description
#. For example ATA1, partition #5 (ad0s5)
#. :sl1:
#: ../partman-base.templates:42001
#, no-c-format
msgid "ATA%s, partition #%s (%s)"
msgstr "ATA%s, partition nr. %s (%s)"

#. Type: text
#. Description
#. For example IDE0 master (hda)
#. :sl1:
#: ../partman-base.templates:43001
#, no-c-format
msgid "IDE%s master (%s)"
msgstr "IDE%s master (%s)"

#. Type: text
#. Description
#. For example IDE1 slave (hdd)
#. :sl1:
#: ../partman-base.templates:44001
#, no-c-format
msgid "IDE%s slave (%s)"
msgstr "IDE%s slave (%s)"

#. Type: text
#. Description
#. For example IDE1 master, partition #5 (hdc5)
#. :sl1:
#: ../partman-base.templates:45001
#, no-c-format
msgid "IDE%s master, partition #%s (%s)"
msgstr "IDE%s master, partition nr. %s (%s)"

#. Type: text
#. Description
#. For example IDE2 slave, partition #5 (hdf5)
#. :sl1:
#: ../partman-base.templates:46001
#, no-c-format
msgid "IDE%s slave, partition #%s (%s)"
msgstr "IDE%s slave, partition nr. %s (%s)"

#. Type: text
#. Description
#. :sl1:
#: ../partman-base.templates:47001
#, no-c-format
msgid "SCSI%s (%s,%s,%s) (%s)"
msgstr "SCSI%s (%s,%s,%s) (%s)"

#. Type: text
#. Description
#. :sl1:
#: ../partman-base.templates:48001
#, no-c-format
msgid "SCSI%s (%s,%s,%s), partition #%s (%s)"
msgstr "SCSI%s (%s,%s,%s), partition nr. %s (%s)"

#. Type: text
#. Description
#. :sl1:
#: ../partman-base.templates:49001
#, no-c-format
msgid "SCSI%s (%s)"
msgstr "SCSI%s (%s)"

#. Type: text
#. Description
#. :sl1:
#: ../partman-base.templates:50001
#, no-c-format
msgid "SCSI%s, partition #%s (%s)"
msgstr "SCSI%s, partition nr. %s (%s)"

#. Type: text
#. Description
#. For example MMC/SD card #1 (mmcblk0)
#. :sl3:
#: ../partman-base.templates:51001
#, fuzzy, no-c-format
msgid "MMC/SD card #%s (%s)"
msgstr "DASD %s (%s)"

#. Type: text
#. Description
#. For example MMC/SD card #1, partition #2 (mmcblk0p2)
#. :sl3:
#: ../partman-base.templates:52001
#, fuzzy, no-c-format
msgid "MMC/SD card #%s, partition #%s (%s)"
msgstr "SCSI%s, partition nr. %s (%s)"

#. Type: text
#. Description
#. :sl3:
#: ../partman-base.templates:53001
#, no-c-format
msgid "RAID%s device #%s"
msgstr "RAID%s-enhed #%s"

#. Type: text
#. Description
#. :sl3:
#: ../partman-base.templates:54001
#, no-c-format
msgid "Encrypted volume (%s)"
msgstr "Krypteret arkiv (%s)"

#. Type: text
#. Description
#. For example: Serial ATA RAID isw_dhiiedgihc_Volume0 (mirror)
#. :sl3:
#: ../partman-base.templates:55001
#, no-c-format
msgid "Serial ATA RAID %s (%s)"
msgstr "Serial ATA RAID %s (%s)"

#. Type: text
#. Description
#. For example: Serial ATA RAID isw_dhiiedgihc_Volume01 (partition #1)
#. :sl3:
#: ../partman-base.templates:56001
#, no-c-format
msgid "Serial ATA RAID %s (partition #%s)"
msgstr "Serial ATA RAID %s (partition #%s)"

#. Type: text
#. Description
#. Translators: "multipath" is a pretty tricky term to translate
#. You'll find some documentation about it at
#. http://www.redhat.com/docs/manuals/csgfs/browse/4.6/DM_Multipath/index.html
#. "Short" definition:
#. Device Mapper Multipathing (DM-Multipath) allows you to configure
#. multiple I/O paths between server nodes and storage arrays into a
#. single device. These I/O paths are physical SAN connections that can
#. include separate cables, switches, and controllers. Multipathing
#. aggregates the I/O paths, creating a new device that consists of the
#. aggregated paths.
#. WWID stands for World-Wide IDentification
#. :sl3:
#: ../partman-base.templates:57001
#, no-c-format
msgid "Multipath %s (WWID %s)"
msgstr "Multipath %s (WWID %s)"

#. Type: text
#. Description
#. :sl3:
#: ../partman-base.templates:58001
#, no-c-format
msgid "Multipath %s (partition #%s)"
msgstr "Multipath %s (partition #%s)"

#. Type: text
#. Description
#. :sl3:
#: ../partman-base.templates:59001
#, no-c-format
msgid "LVM VG %s, LV %s"
msgstr "LVM AG %s, LA %s"

#. Type: text
#. Description
#. :sl5:
#: ../partman-base.templates:60001
#, no-c-format
msgid "ZFS pool %s, volume %s"
msgstr ""

#. Type: text
#. Description
#. :sl3:
#: ../partman-base.templates:61001
#, no-c-format
msgid "Loopback (loop%s)"
msgstr "Loopback (loop%s)"

#. Type: text
#. Description
#. :sl5:
#: ../partman-base.templates:62001
#, no-c-format
msgid "DASD %s (%s)"
msgstr "DASD %s (%s)"

#. Type: text
#. Description
#. :sl5:
#: ../partman-base.templates:63001
#, no-c-format
msgid "DASD %s (%s), partition #%s"
msgstr "DASD %s (%s), partition #%s"

#. Type: text
#. Description
#. eg. Virtual disk 1 (xvda)
#. :sl4:
#: ../partman-base.templates:64001
#, no-c-format
msgid "Virtual disk %s (%s)"
msgstr "Virtuel disk %s (%s)"

#. Type: text
#. Description
#. eg. Virtual disk 1, partition #1 (xvda1)
#. :sl4:
#: ../partman-base.templates:65001
#, no-c-format
msgid "Virtual disk %s, partition #%s (%s)"
msgstr "Virtuel disk %s, partition #%s (%s)"

#. Type: text
#. Description
#. :sl1:
#: ../partman-base.templates:66001
msgid "Cancel this menu"
msgstr "Fortryd denne menu"

#. Type: text
#. Description
#. Main menu entry
#. :sl1:
#: ../partman-base.templates:67001
msgid "Partition disks"
msgstr "Partitionér diske"

#. Type: boolean
#. Description
#: ../partman-base.templates:65001
msgid "Unmount partitions that are in use?"
msgstr "Afmontér partitioner som er i brug?"

#. Type: boolean
#. Description
#: ../partman-base.templates:65001
msgid ""
"The installer has detected that the following disks have mounted partitions:"
msgstr ""
"Installationsprogrammet har opdaget, at følgende diske har monterede "
"partitioner:"

#. Type: boolean
#. Description
#: ../partman-base.templates:65001
msgid ""
"Do you want the installer to try to unmount the partitions on these disks "
"before continuing?  If you leave them mounted, you will not be able to "
"create, delete, or resize partitions on these disks, but you may be able to "
"install to existing partitions there."
msgstr ""
"Skal installationsprogrammet forsøge at afmontere partitionerne på disse "
"diske, inden du fortsætter? Du vil ikke kunne oprette, slette eller ændre "
"størrelse på partitioner på denne disk, men du vil eventuelt være i stand "
"til at installere på eksisterende partitioner dér."

#. Type: note
#. Description
#: ../partman-base.templates:66001
msgid "Installation medium on ${PARTITION}"
msgstr ""

#. Type: note
#. Description
#: ../partman-base.templates:66001
msgid ""
"Your installation medium is on ${PARTITION}. You will not be able to create, "
"delete, or resize partitions on this disk, but you may be able to install to "
"existing partitions there."
msgstr ""