#! /bin/sh
set -e

. /usr/share/debconf/confmodule

if [ "$1" ]; then
	export LANG=C # avoid locale errors from perl
	ROOT="$1"
	chroot=chroot
	log='log-output -t user-setup'
else
	ROOT=
	chroot=
	log=
fi

. /usr/lib/user-setup/functions.sh

# Set a password, via chpasswd.
# Use a heredoc rather than echo, to avoid the password
# showing in the process table. (However, this is normally
# only called when first installing the system, when root has no
# password at all, so that should be an unnecessary precaution).
#
# Pass in four arguments: the user, the password, 'true' if the
# password has been pre-crypted (by preseeding), and a 'true' if
# the home directory is encrypted
setpassword () {
	local USER PASSWD PAM_SET_PWD
	USER="$1"
	PASSWD="$2"

	local VERSION=$($chroot $ROOT dpkg-query -W -f '${Version}\n' passwd)
	PAM_SET_PWD=false
	if $chroot $ROOT dpkg --compare-versions "$VERSION" ge "1:4.1.4-1"; then
		# support for versions with PAM support (Squeeze)
		PAM_SET_PWD=true
		if [ "$3" = true ]; then
			$chroot $ROOT usermod --password=$PASSWD $USER
		else
			$chroot $ROOT chpasswd <<EOF
$USER:$PASSWD
EOF
		fi
	else
		# compatibility support for versions without PAM support (Lenny)
		local OPTS
		if [ "$3" = true ]; then
			OPTS=-e
		else
			OPTS=-m
		fi
		$chroot $ROOT chpasswd $OPTS <<EOF
$USER:$PASSWD
EOF
	fi
	# If the password was set using PAM, pam_ecryptfs will handle the initial
	# passphrase wrapping.  Otherwise, we need this hack...
	if [ "$4" = true ] && [ "$PAM_SET_PWD" = false ]; then
		local UNWRAPPED_PASSPHRASE_FILE WRAPPED_PASSPHRASE_FILE MOUNT_PASSPHRASE
		UNWRAPPED_PASSPHRASE_FILE=/dev/shm/.ecryptfs-$USER
		if [ -e "$UNWRAPPED_PASSPHRASE_FILE" ]; then
			WRAPPED_PASSPHRASE_FILE=/home/$USER/.ecryptfs/wrapped-passphrase
			MOUNT_PASSPHRASE=$($chroot $ROOT cat $UNWRAPPED_PASSPHRASE_FILE)
			$chroot $ROOT ecryptfs-wrap-passphrase $WRAPPED_PASSPHRASE_FILE - <<EOF
$MOUNT_PASSPHRASE
$PASSWD
EOF
			$chroot $ROOT rm -f $UNWRAPPED_PASSPHRASE_FILE
			$chroot $ROOT chown $USER:$USER $WRAPPED_PASSPHRASE_FILE
		else
			echo "$UNWRAPPED_PASSPHRASE_FILE does not exist, but should!" >&2
			db_input critical user-setup/encrypt-home-failed || true
			db_go || true
		fi
	fi
}

# Enable/disable shadow passwords.
db_get passwd/shadow
if [ "$RET" = true ]; then
	$log $chroot $ROOT shadowconfig on
else
	$log $chroot $ROOT shadowconfig off
fi

if ! root_password; then
	# Was the root password preseeded encrypted?
	if db_get passwd/root-password-crypted && [ "$RET" ]; then
		# The root password was preseeded encrypted.
		ROOT_PW="$RET"
		PRECRYPTED=true
	else
		db_get passwd/root-password
		ROOT_PW="$RET"
		PRECRYPTED=false
	fi
	# Clear the root password from the database, and set the password.
	db_set passwd/root-password-crypted ''
	db_set passwd/root-password ''
	db_set passwd/root-password-again ''
	if [ "$ROOT_PW" ]; then
		setpassword root "$ROOT_PW" "$PRECRYPTED"
	fi
	ROOT_PW=
else
	# Just in case, clear any preseeded root password from the database
	# anyway.
	db_set passwd/root-password-crypted ''
	db_set passwd/root-password ''
	db_set passwd/root-password-again ''
fi

db_get passwd/make-user
if [ "$RET" = true ] && ! is_system_user; then
	if db_get passwd/user-password-crypted && [ "$RET" ]; then
		USER_PW="$RET"
		USER_PW_CRYPTED=true
	else
		db_get passwd/user-password
		USER_PW="$RET"
		USER_PW_CRYPTED=false
	fi

	if db_get passwd/user-uid && [ "$RET" ]; then
		if [ -x $ROOT/usr/sbin/adduser ]; then
			UIDOPT="--uid $RET"
		else
			UIDOPT="-u $RET"
		fi
	else
		UIDOPT=
	fi

	ENCRYPT_HOME="false"
	ENCRYPT_HOME_OPT=
	if [ "$OVERRIDE_ALREADY_ENCRYPTED_SWAP" ]; then
		ENCRYPT_HOME="true"
		ENCRYPT_HOME_OPT="--encrypt-home"
	elif db_get user-setup/encrypt-home && [ "$RET" = true ]; then
		ENCRYPT_HOME="true"
		ENCRYPT_HOME_OPT="--encrypt-home"
		if type anna-install >/dev/null 2>&1 && [ -d /lib/debian-installer ]; then
			ANNA_QUIET=1 DEBIAN_FRONTEND=none $log anna-install crypto-modules || true
			depmod -a >/dev/null 2>&1 || true
		fi
		for module in aes cbc ecb; do
			modprobe -q "$module" || true
		done
		apt-install ecryptfs-utils 2>/dev/null
		apt-install cryptsetup 2>/dev/null
		
		umountproc=false
		umountsys=false
		umountdev=false
		if [ ! -e $ROOT/proc/cmdline ]; then
			$log $chroot $ROOT mount -t proc proc /proc
			umountproc=:
		fi
		if [ ! -e $ROOT/sys/block ]; then
			# We need /sys for devtmpfs to create block devices.
			$log $chroot $ROOT mount -t sysfs sysfs /sys
			umountsys=:
		fi
		if [ $(stat -c %d "$ROOT/dev") -eq $(stat -c %d "$ROOT") ]; then
			mount --bind /dev $ROOT/dev
			umountdev=:
		else
			$log $chroot $ROOT udevadm settle
		fi
		if ! $log $chroot $ROOT ecryptfs-setup-swap -f -n; then
			echo "ecryptfs-setup-swap failed." >&2
			db_input critical user-setup/encrypt-home-failed || true
			db_go || true
			ENCRYPT_HOME="false"
			ENCRYPT_HOME_OPT=
		fi
		if $umountproc; then
			$log $chroot $ROOT umount /proc
		fi
		if $umountsys; then
			$log $chroot $ROOT umount /sys
		fi
		if $umountdev; then
			umount $ROOT/dev
		fi
	fi


	# Add the user to the database, using adduser in noninteractive
	# mode.
	db_get passwd/username
	USER="$RET"
	db_get passwd/user-fullname

	HOME_EXISTED=
	if [ -d "$ROOT/home/$USER" ]; then
		HOME_EXISTED=1
		# user-setup-ask shouldn't have allowed this, but for safety:
		ENCRYPT_HOME="false"
		ENCRYPT_HOME_OPT=
	fi

	umountsys=false
	if [ -n "$ENCRYPT_HOME_OPT" ]; then
		if [ ! -e $ROOT/sys/kernel ]; then
			$log $chroot $ROOT mount -t sysfs sysfs /sys
			umountsys=:
		fi
		mkdir -p $ROOT/dev/shm
		$log $chroot $ROOT mount -t tmpfs tmpfs /dev/shm
	fi
	if [ -x $ROOT/usr/sbin/adduser ]; then
		$log $chroot $ROOT adduser --disabled-password --gecos "$RET" $UIDOPT $ENCRYPT_HOME_OPT "$USER" >/dev/null || true
	else
		$log $chroot $ROOT useradd -c "$RET" -m "$USER" $UIDOPT >/dev/null || true
	fi

	# Clear the user password from the database.
	db_set passwd/user-password-crypted ''
	db_set passwd/user-password ''
	db_set passwd/user-password-again ''
	setpassword "$USER" "$USER_PW" "$USER_PW_CRYPTED" "$ENCRYPT_HOME"
	if [ -n "$ENCRYPT_HOME_OPT" ]; then
		if $umountsys; then
			$log $chroot $ROOT umount /sys
		fi
		$log $chroot $ROOT umount /dev/shm
	fi

	if [ "$HOME_EXISTED" ]; then
		# The user's home directory already existed before we called
		# adduser. This often means that a mount point under
		# /home/$USER was selected in (and thus created by) partman,
		# and the home directory may have ended up owned by root.
		$log $chroot $ROOT chown "$USER:$USER" "/home/$USER" >/dev/null || true
	fi

	if [ -n "$USER" ]; then
		for group in lpadmin sambashare; do
			$log $chroot $ROOT addgroup --system $group >/dev/null 2>&1 || true
		done
		if type archdetect >/dev/null 2>&1; then
			SUBARCH="$(archdetect)"
			case $SUBARCH in
				powerpc/ps3|powerpc/cell)
					$log $chroot $ROOT addgroup --system spu >/dev/null 2>&1 || true
					;;
			esac
		fi
		db_get passwd/user-default-groups
		for group in $RET; do
			$log $chroot $ROOT adduser "$USER" $group >/dev/null 2>&1 || true
		done
 
 		# Configure desktop auto-login if instructed by preseeding
 		db_get passwd/auto-login
 		if [ "$RET" = true ]; then
			db_get passwd/auto-login-backup
			BACKUP="${RET:+.$RET}"

			if [ -d "$ROOT/etc/gdm" ]; then
				# Configure GDM autologin
				GDMCustomFile=$ROOT/etc/gdm/custom.conf
				if [ -e "$GDMCustomFile" ] && [ "$BACKUP" ]; then
					cp "$GDMCustomFile" "${GDMCustomFile}$BACKUP"
				fi
				AutologinParameters="AutomaticLoginEnable=true\n\
AutomaticLogin=$USER\n\
TimedLoginEnable=true\n\
TimedLogin=$USER\n\
TimedLoginDelay=10"

				# Prevent from updating if parameters already present (persistent usb key)
				if ! `grep -qs "AutomaticLogin=$USER" $GDMCustomFile` ; then
					if [ -e "$GDMCustomFile" ]; then
						sed -i '/\(Automatic\|Timed\)Login/d' $GDMCustomFile
					fi
					if ! `grep -qs '\[daemon\]' $GDMCustomFile` ; then
						echo '[daemon]' >> $GDMCustomFile
					fi
					sed -i "s/\[daemon\]/\[daemon\]\n$AutologinParameters/" $GDMCustomFile
				fi
			fi
	 
			if $chroot $ROOT [ -f /etc/kde4/kdm/kdmrc ]; then
				# Configure KDM autologin
				$log $chroot $ROOT sed -i$BACKUP -r \
					-e "s/^#?AutoLoginEnable=.*\$/AutoLoginEnable=true/" \
					-e "s/^#?AutoLoginUser=.*\$/AutoLoginUser=$USER/" \
					-e "s/^#?AutoReLogin=.*\$/AutoReLogin=true/" \
					/etc/kde4/kdm/kdmrc
			fi

			if $chroot $ROOT [ -f /etc/lxdm/lxdm.conf ]; then
    				# Configure LXDM autologin with LXDE session
   				$log $chroot $ROOT sed -i$BACKUP -r \
        				-e "s/^# autologin=dgod/autologin=$USER/" \
        				-e "s/^# session/session/" \
        				/etc/lxdm/lxdm.conf
			fi

			if $chroot $ROOT [ -f /etc/xdg/lubuntu/lxdm/lxdm.conf ]; then
    				# Configure LXDM autologin with Lubuntu session
				$log $chroot $ROOT sed -i$BACKUP -r \
			        	-e "s/^# autologin=dgod/autologin=$USER/" \
			        	-e "s/^# session/session/" \
			        	-e "s/startlxde/startlubuntu/" \
			        	/etc/xdg/lubuntu/lxdm/lxdm.conf
			fi

			if $chroot $ROOT [ -d /etc/lightdm ]; then
				# Configure LightDM autologin
				LightDMCustomFile=$ROOT/etc/lightdm/lightdm.conf
				AutologinParameters="autologin-guest=false\n\
autologin-user=$USER\n\
autologin-user-timeout=0\n\
autologin-session=lightdm-autologin"
				if ! grep -qs '^autologin-user' $LightDMCustomFile; then
					if ! grep -qs '^\[SeatDefaults\]' $LightDMCustomFile; then
						echo '[SeatDefaults]' >> $LightDMCustomFile
					fi
					sed -i "s/\[SeatDefaults\]/\[SeatDefaults\]\n$AutologinParameters/" $LightDMCustomFile
				#oem config scenario
				else
					sed -i "s/^\(\(str  *\)\?autologin-user\)=.*$/\1=$USER/g;" $ROOT/etc/lightdm/lightdm.conf
				fi
			fi
		fi
	fi

	db_get passwd/root-login
	if [ "$RET" = false ] && [ -n "$USER" ]; then
		# Ensure sudo is installed, and set up the user to be able
		# to use it.
		if [ ! -e $ROOT/etc/sudoers ]; then
			# try to work in d-i and out; it's better to
			# use apt-install in d-i
			apt-install sudo 2>/dev/null || $log $chroot $ROOT apt-get -q -y install sudo || true
		fi
		if [ -e $ROOT/etc/sudoers ]; then
			# Test if we can add the user to the sudo group
			# (possible if sudo >= 1.7.2-2 is installed on the target system)
			# If we can, do it this way, otherwise add the user to sudoers
			# See #597239
			if ! $log $chroot $ROOT adduser "$USER" sudo >/dev/null 2>&1; then
				echo "$USER ALL=(ALL) ALL" >> $ROOT/etc/sudoers
			fi
		else
			# sudo failed to install, system won't be usable
			exit 1
		fi
		# Configure gksu to use sudo, via an alternative, if it's
		# installed and the alternative is registered.
		if $chroot $ROOT update-alternatives --display libgksu-gconf-defaults >/dev/null 2>&1; then
			$log $chroot $ROOT update-alternatives --set libgksu-gconf-defaults /usr/share/libgksu/debian/gconf-defaults.libgksu-sudo
			$log $chroot $ROOT update-gconf-defaults || true
		fi
		# Configure aptitude to use sudo.
		echo 'Aptitude::Get-Root-Command "sudo:/usr/bin/sudo";' > $ROOT/etc/apt/apt.conf.d/00aptitude
	else
		# Configure gksu to use su, via an alternative, if it's
		# installed and the alternative is registered.
		if $chroot $ROOT update-alternatives --display libgksu-gconf-defaults >/dev/null 2>&1; then
			$log $chroot $ROOT update-alternatives --set libgksu-gconf-defaults /usr/share/libgksu/debian/gconf-defaults.libgksu-su
			$log $chroot $ROOT update-gconf-defaults || true
		fi
	fi
	if [ -z "$OVERRIDE_ALREADY_ENCRYPTED_SWAP" ] && \
	   [ -n "$ENCRYPT_HOME_OPT" ] && [ -e $ROOT/etc/crypttab ]; then
		# Zero out all encrypted swap partitions.  It is assumed that
		# passwords are not used beyond this point in the install.
		# cryptswap0 /dev/sda5 /dev/urandom swap,cipher=aes-cbc-essiv:sha256
		# Ideally we would set up a new progress bar here, but we're
		# inside finish-install's and cdebconf doesn't support nested
		# progress bars.
		db_progress INFO user-setup/progress/wipe-swap
		while read name device source options; do
			if echo "$options" | grep -q "swap"; then
				if swapoff $device; then
					if [ ! -b $device ]; then
						ONE_MEG=$((1024*1024))
						size=$(($(stat -c %s ${device})/${ONE_MEG}))
						dd if=/dev/zero of=$device bs=${ONE_MEG} count=$size 2>/dev/null || true
					else
						dd if=/dev/zero of=$device bs=16M 2>/dev/null || true
					fi
				fi
			fi
		done < $ROOT/etc/crypttab
	fi

else
	# Just in case, clear any preseeded user password from the database
	# anyway.
	db_set passwd/user-password-crypted ''
	db_set passwd/user-password ''
	db_set passwd/user-password-again ''
fi

exit 0