#!ipxe

# Variables are specified in boot.ipxe.cfg

# Some menu defaults
set menu-timeout 5000
set submenu-timeout ${menu-timeout}
isset ${menu-default} || set menu-default exit

# Figure out if client is 64-bit capable
cpuid --ext 29 && set arch x64 || set arch x86
cpuid --ext 29 && set archl amd64 || set archl i386

###################### MAIN MENU ####################################

:start
menu iPXE boot menu for ${initiator-iqn}
item --gap --             ------------------------- Operating systems ------------------------------
item --key f freedos      Boot FreeDOS from iSCSI
item --key m msdos        Boot MS-DOS from iSCSI
item --key u ubuntu       Boot Ubuntu from iSCSI
item --key v vmware       Boot VMware ESXi from iSCSI
item --key w windows7     Boot Windows 7 from iSCSI
item --key l menu-live    Live environments...
item --gap --             ------------------------- Tools and utilities ----------------------------
item --key p pxelinux     Load PXELinux menu
item --key r menu-recovery Recovery tools...
item --key d menu-diag    Diagnostics tools...
item --key i menu-install Installers...
item --gap --             ------------------------- Advanced options -------------------------------
item --key c config       Configure settings
item shell                Drop to iPXE shell
item reboot               Reboot computer
item
item --key x exit         Exit iPXE and continue BIOS boot
choose --timeout ${menu-timeout} --default ${menu-default} selected || goto cancel
set menu-timeout 0
goto ${selected}

:cancel
echo You cancelled the menu, dropping you to a shell

:shell
echo Type 'exit' to get the back to the menu
shell
set menu-timeout 0
set submenu-timeout 0
goto start

:failed
echo Booting failed, dropping to shell
goto shell

:reboot
reboot

:exit
exit

:config
config
goto start

:back
set submenu-timeout 0
clear submenu-default
goto start

############ MAIN MENU ITEMS ############

:freedos
echo Booting FreeDOS from iSCSI for ${initiator-iqn}
set root-path ${base-iscsi}:${hostname}.boot.freedos
sanboot ${root-path} || goto failed
goto start

:msdos
echo Booting MS-DOS from iSCSI for ${initiator-iqn}
set root-path ${base-iscsi}:${hostname}.boot.msdos
sanboot ${root-path} || goto failed
goto start

:ubuntu
echo Booting Ubuntu from iSCSI for ${initiator-iqn}
set root-path ${base-iscsi}:${hostname}.boot.ubuntu
sanboot ${root-path} || goto failed
goto start

:vmware
echo Booting VMware ESXi from iSCSI for ${initiator-iqn}
set root-path ${base-iscsi}:${hostname}.boot.vmware
sanboot ${root-path} || goto failed
goto start

:windows7
echo Booting Windows 7 from iSCSI for ${initiator-iqn}
# Force gateway to be the iSCSI target server (kludge for stupid window behavior)
set netX/gateway ${iscsi-server}
set root-path ${base-iscsi}:${hostname}.boot.windows7
sanboot ${root-path} || goto failed
goto start

:pxelinux
#set 210:string tftp://${next-server}/
set 210:string http://10.2.1.254/pxe/
chain ${210:string}pxelinux.0 || goto failed
goto start

###################### RECOVERY MENU ################################

:menu-recovery
menu Recovery tools
item sysrcd          SystemRescueCD ${sysrcd-version}
item spinrite        SpinRite ${spinrite-version}
item spinrite-msdos  SpinRite ${spinrite-version} (using MS-DOS 6.22)
item macrium-winpe Macrium Reflect ${macrium-version} Rescue CD (WinPE 4.0 ${arch})
item macrium-winpe-sanboot   Macrium Reflect ${macrium-version} Rescue CD (WinPE 4.0 ${arch} with sanboot)
item macrium-linux   Macrium Reflect ${macrium-version} Rescue CD (Linux ${arch})
item macrium-linux-sanboot   Macrium Reflect ${macrium-version} Rescue CD (Linux ${arch} with sanboot)
item firefly         Firefly IllumOS recovery environment ${firefly-version}
item freedos-direct  FreeDOS 1.1 (directly using iPXE)
item
item --key 0x08 back Back to top menu...
iseq ${menu-default} menu-recovery && isset ${submenu-default} && goto menu-recovery-timed ||
choose selected && goto ${selected} || goto start
:menu-recovery-timed
choose --timeout ${submenu-timeout} --default ${submenu-default} selected && goto ${selected} || goto start

:spinrite
sanboot --no-describe --drive 0x00 ${sanboot-url}spinrite-${spinrite-version}/spinrite-${spinrite-version}.img || goto failed
#sanboot --no-describe --drive 0x081 ${sanboot-url}spinrite-${spinrite-version}/spinrite-${spinrite-version}.iso
#initrd spinrite/spinrite-${spinrite-version}.img
#chain memdisk
goto start

:spinrite-msdos
sanboot --no-describe --drive 0x00 ${sanboot-url}spinrite-${spinrite-version}/spinrite-${spinrite-version}-msdos.img || goto failed
goto start

:sysrcd
echo Booting SystemRescueCD ${sysrcd-version} x86 for ${initiator-iqn}
# Fixup needed after copying files from downloaded ISO to directory:
#  cd path/to/sysrcd-iso-unpacked-files/isolinux && \
#   perl -p -i -e 's{/bootdisk}{../bootdisk}' isolinux.cfg && \
#   perl -p -i -e 's{scandelay=1}{scandelay=1 dodhcp netboot=nfs://nas.smidsrod.lan:/raid/boot/sysrcd-3.8.0-x86}g' isolinux.cfg && \
#   perl -p -i -e 's{setkmap=us}{setkmap=us dodhcp netboot=nfs://nas.smidsrod.lan:/raid/boot/sysrcd-3.8.0-x86}g' isolinux.cfg && \
#   perl -p -i -e 's{rescuecd_us}{rescuecd_no}; s{US}{NO}; s{setkmap=us}{setkmap=no}g; s{american}{norwegian};' isolinux.cfg && \
#   cd -
# PXELinux options, see http://syslinux.zytor.com/wiki/index.php/PXELINUX for details
set 210:string ${boot-url}sysrcd-${sysrcd-version}-x86/isolinux/
set 209:string isolinux.cfg
set filename ${210:string}pxelinux.0
chain ${filename} || goto failed
goto start

:macrium-winpe
echo Booting Macrium Reflect ${macrium-version} (WinPE 4.0 ${arch}) for ${initiator-iqn}
set base-url macrium-${macrium-version}/macrium-${macrium-version}-rescue-winpe-4.0-${arch}
kernel wimboot
initrd ${base-url}/bootmgr          bootmgr
initrd ${base-url}/Boot/BCD         BCD
initrd ${base-url}/Boot/boot.sdi    boot.sdi
initrd ${base-url}/sources/boot.wim boot.wim
boot || goto failed
goto start

:macrium-linux
echo Booting Macrium Reflect ${macrium-version} (Linux ${arch}) for ${initiator-iqn}
set base-url macrium-${macrium-version}/macrium-${macrium-version}-rescue-linux
kernel ${base-url}/vmlinuz
initrd ${base-url}/initramfs.xz
imgargs vmlinuz vga=0x317
boot || goto failed
goto start

:macrium-winpe-sanboot
sanboot --no-describe ${sanboot-url}macrium-${macrium-version}/macrium-${macrium-version}-rescue-winpe-4.0-${arch}.iso || goto failed
goto start

:macrium-linux-sanboot
sanboot --no-describe ${sanboot-url}macrium-${macrium-version}/macrium-${macrium-version}-rescue-linux.iso || goto failed
goto start

:firefly
echo Booting Firefly ${firefly-version} for ${initiator-iqn}
set base-url firefly-${firefly-version}/boot
# http://alexeremin.blogspot.no/2013/05/firefly-failsafe-image-for-illumos.html
# http://sourceforge.net/projects/fireflyfailsafe/files/
# Download ISO, unpack ISO and copy files to boot-url
# The ramdisk is compressed with gzip, which must be unpacked
# to work with iPXE
# mv firefly firefly.gz
# gunzip firefly.gz
kernel ${base-url}/platform/i86pc/kernel/amd64/unix
module ${base-url}/firefly
boot || goto failed
goto start

:freedos-direct
echo Booting FreeDOS 1.1 KERNEL.SYS for ${initiator-iqn}
set base-url freedos-1.1/fd11src/FREEDOS/SETUP/ODIN
# TODO: Work-in-progress
kernel ${base-url}/KERNEL.SYS
boot || goto failed
goto start

###################### DIAGNOSTICS MENU #############################

:menu-diag
menu Diagnostic tools
item hdt           HDT ${hdt-version}
item memtest       Memtest86+ 4.20
item memtest-ipxe  Memtest86+ 4.20 (iPXE)
item breakin       Breakin 3.71
item dban          Darik's Boot and Nuke 2.2.7
item etdump        Bart's etdump 1.2
item wdcdiag       Western Digital Diagnostics 5.04f
item
item --key 0x08 back Back to top menu...
iseq ${menu-default} menu-diag && isset ${submenu-default} && goto menu-diag-timed ||
choose selected && goto ${selected} || goto start
:menu-diag-timed
choose --timeout ${submenu-timeout} --default ${submenu-default} selected && goto ${selected} || goto start

:hdt
# http://hdt-project.org/
sanboot --no-describe --drive 0x00 ${sanboot-url}hdt-${hdt-version}.img || goto failed
goto start

:memtest
# TODO: Fix the URI parser to make the + sign work
#chain memtest86+-4.20.elf.img - || goto failed
chain memtest86plus-4.20.elf.img - || goto failed
goto start

:memtest-ipxe
chain memtest.0 passes=1 && set memtest GOOD || set memtest BAD
set memtest_errno:uint8 ${errno}
iseq ${memtest} GOOD && goto memtest-info ||
iseq ${memtest_errno} 0x1 && set memtest BAD || set memtest UNKNOWN
:memtest-info
menu Your memory seems to be ${memtest}
item memtest-report   Report memtest result to web service
item --key 0x08 menu-diag Back to diagnostics menu...
choose --default menu-diag selected && goto ${selected} || goto start

:memtest-report
chain ${memtest-report-url}?result=${memtest}&mac=${mac}&uuid=${uuid}&hostname=${hostname} ||
goto menu-diag

:breakin
# Stress-testing and diagnostics utility
# http://www.advancedclustering.com/software/breakin.html
# Set sshpasswd=yourpassword for remote access
# Set startup= to 'cloner' or 'rescue' for more features
# When startup=cloner, server= and image= can also be set
# http://www.advancedclustering.com/software/cloner.html
kernel breakin-3.71/kernel-3.71
initrd breakin-3.71/initrd-3.71.cpio.lzma
imgargs kernel-3.71 startup=breakin
boot || goto failed
goto start

:dban
kernel dban-2.2.7/DBAN.BZI
imgargs DBAN.BZI nuke="dwipe --method gutmann --rounds 2 --verify last" silent vga=785
boot || goto failed
goto start

:etdump
# Booting it with memdisk makes it read/write, while sanboot forces read/only
#sanboot --drive 0x00 ${sanboot-url}freedos-etdump-floppy.img
initrd freedos-etdump-floppy.img
chain memdisk || goto failed
goto start

:wdcdiag
# Extracted the bootable floppy image from diag-5.04f.iso
sanboot --drive 0x00 ${sanboot-url}western-digital/diag-5.04f.img || goto failed
goto start

############################ INSTALLER MENU #########################

:menu-install
menu Installers for ${initiator-iqn}
item freedos-install      Install FreeDOS 1.1 to iSCSI
item msdos-install        Install MS-DOS 6.22 to iSCSI
item ubuntu-install       Install Ubuntu 12.04 ${archl} to iSCSI
item windows7-install     Install Windows 7 to iSCSI
item vmware-x64-install   Install VMware ESXi 5.0 (x64) to iSCSI
item vmware-x86-install   Install VMware ESXi 3.5 (x86) to iSCSI
item winpe                Hook Windows 7 iSCSI and boot WinPE
item winpe-wimboot        Boot WinPE ${arch} using wimboot
item ubuntu-installer-remote Install Ubuntu 12.04 ${archl} from public archive
item ubuntu-install-local Install Ubuntu 12.04 ${archl} to local drive(s)
item xenclient-install   Install XenClient 2.1 to local drive
item windows7-hookonly   Hook Windows 7 iSCSI and boot local CD
item
item --key 0x08 back      Back to top menu...
iseq ${menu-default} menu-install && isset ${submenu-default} && goto menu-install-timed ||
choose selected && goto ${selected} || goto start
:menu-install-timed
choose --timeout ${submenu-timeout} --default ${submenu-default} selected && goto ${selected} || goto start

:freedos-install
echo Booting FreeDOS 1.1 installer to iSCSI for ${initiator-iqn}
set root-path ${base-iscsi}:${hostname}.boot.freedos
sanhook ${root-path} || goto failed
sanboot --drive 0x81 ${sanboot-url}freedos-1.1/fd11src.iso || goto failed
goto start

:msdos-install
echo Booting MS-DOS 6.22 installer to iSCSI for ${initiator-iqn}
set root-path ${base-iscsi}:${hostname}.boot.msdos
sanhook ${root-path} || goto failed
sanboot --no-describe --drive 0x00 ${sanboot-url}msdos-6.22/disk1.img || goto failed
goto start

:ubuntu-install
echo Starting Ubuntu 12.04 ${archl} installer for ${initiator-iqn}
# Hook iSCSI drive
set root-path ${base-iscsi}:${hostname}.boot.ubuntu
#sanhook ${root-path} || goto failed
# Start ubuntu-installer. Remember that the iSCSI target must be writable
# by anyone, as debian-installer generates a randomized initiator-iqn in
# /etc/iscsi/initiatorname.iscsi
# The preseed script used takes care of rewriting it to the
# hostname-based IQN used in this script.
# This kernel param which open-iscsi README.Debian mentions doesn't work
# inside debian-installer, unfortunately: iscsi_initiator=${initiator-iqn}
# Hard workaround available here:
# http://umfcloudpilot.eduserv.org.uk/entries/20299686-enable-pre-seed-or-kickstart-seeding-of-iscsi-intiator-iqn-in-ubuntu-server
set base-url ${boot-url}ubuntu-12.04-server-${archl}
kernel ${base-url}/install/netboot/ubuntu-installer/${archl}/linux
initrd ${base-url}/install/netboot/ubuntu-installer/${archl}/initrd.gz
imgargs linux auto=true fb=false url=${base-url}/./preseed.cfg DEBCONF_DEBUG=5 netcfg/get_hostname=${hostname} partman-iscsi/login/address=${iscsi-server} partman-iscsi/login/targets=${base-iqn}:${hostname}.boot.ubuntu partman-iscsi/login/username=${username} partman-iscsi/login/password=${password}
boot || goto failed
goto start

:ubuntu-install-local
echo Starting Ubuntu 12.04 ${archl} local installer for ${initiator-iqn}
set base-url ${boot-url}ubuntu-12.04-server-${archl}
kernel ${base-url}/install/netboot/ubuntu-installer/${archl}/linux
initrd ${base-url}/install/netboot/ubuntu-installer/${archl}/initrd.gz
imgargs linux auto=true fb=false url=${base-url}/./preseed.cfg
boot || goto failed
goto start

:windows7-install
echo Starting Windows 7 ${arch} installer for ${initiator-iqn}
# Force gateway to be the iSCSI target server (kludge for stupid window behavior)
set netX/gateway ${iscsi-server}
# Hook iSCSI drive
set root-path ${base-iscsi}:${hostname}.boot.windows7
sanhook ${root-path} || goto failed
# Start Windows 7 installer DVD
#sanboot --no-describe --drive 0x81 ${sanboot-url}windows-7/ultimate-${arch}-en.iso || goto failed
# Better solution, according to Oliver Rath on the mailing-list
# Requires massive amounts of RAM, though
#initrd windows-7/ultimate-${arch}-en.iso
#chain memdisk iso raw || goto failed
# This method uses wimboot
set base-url windows-7/ultimate-${arch}-en
kernel wimboot
initrd ${base-url}/bootmgr                     bootmgr
initrd ${base-url}/boot/bcd                    BCD
initrd ${base-url}/boot/fonts/wgl4_boot.ttf    wgl4_boot.ttf
initrd ${base-url}/boot/boot.sdi               boot.sdi
initrd ${base-url}/sources/boot.wim            boot.wim
boot || goto failed
goto start

:vmware-x64-install
echo Booting VMware 64-bit installer for ${initiator-iqn}
set root-path ${base-iscsi}:${hostname}.boot.vmware
sanhook ${root-path} || goto failed
initrd vmware/vmware-esxi-5.0-x64.iso
chain memdisk iso || goto failed
goto start

:vmware-x86-install
echo Booting VMware 32-bit installer for ${initiator-iqn}
set root-path ${base-iscsi}:${hostname}.boot.vmware
sanhook ${root-path} || goto failed
initrd vmware/vmware-esxi-3.5-x86.iso
chain memdisk iso || goto failed
goto start

:winpe
echo Booting Windows PE ${arch} installer for ${initiator-iqn}
echo (for installing Windows 7)
# Force gateway to be the iSCSI target server (kludge for stupid window behavior)
set netX/gateway ${iscsi-server}

set root-path ${base-iscsi}:${hostname}.boot.windows7
sanhook ${root-path} || goto failed

# Remember to map the install volume with the following command:
# net use y: \\nas\wds /user:NAS\robin
# Use Y:\Operating Systems\Windows 7 x64\setup.exe to install

# Boots WinPE via native MS TFTP support
#chain tftp://${next-server}/%5CBoot%5CPXE%5Cpxeboot.n12
# Better solution, according to Oliver Rath on the mailing-list
# Requires decent amounts of RAM, though
# Details on how to generate winpe-x64.iso from you Windows 7 install DVD
# can be found here: http://technet.microsoft.com/en-us/library/cc722358%28v=ws.10%29.aspx
initrd windows-7/winpe-${arch}.iso
chain memdisk iso raw || goto failed
goto start

:winpe-wimboot
echo Booting Windows PE ${arch} installer for ${initiator-iqn}
#echo (for installing Windows 7)

# Force gateway to be the iSCSI target server (kludge for stupid window behavior)
set netX/gateway ${iscsi-server}

set root-path ${base-iscsi}:${hostname}.boot.windows7
sanhook ${root-path} || goto failed

# Remember to map the install volume with the following command:
# net use y: \\nas\wds /user:NAS\robin
# Use Y:\Operating Systems\Windows 7 x64\setup.exe to install

# Boots WinPE via iPXE wimboot binary
# BCD is from http://www.fensystems.co.uk/~mcb30/BCD
# wimboot prebuilt from http://www.fensystems.co.uk/~mcb30/wimboot
#         source at http://git.ipxe.org/wimboot.git
# bootmgr.exe from the same package that enables PXE booting for Windows
#             (most likely WDS tools)
set base-url winpe/${arch}
kernel wimboot
initrd ${base-url}/media/bootmgr                     bootmgr
initrd ${base-url}/media/Boot/BCD                    BCD
initrd ${base-url}/media/Boot/Fonts/segmono_boot.ttf segmono_boot.ttf
initrd ${base-url}/media/Boot/Fonts/segoe_slboot.ttf segoe_slboot.ttf
initrd ${base-url}/media/Boot/Fonts/wgl4_boot.ttf    wgl4_boot.ttf
initrd ${base-url}/media/Boot/boot.sdi               boot.sdi
initrd ${base-url}/media/sources/boot.wim            boot.wim
boot || goto failed
goto start

:ubuntu-installer-remote
echo Starting Ubuntu 12.04 ${archl} installer for ${initiator-iqn}
set base-url http://no.archive.ubuntu.com/ubuntu/dists/precise/main/installer-${archl}/current/images/netboot/ubuntu-installer/${archl}
kernel ${base-url}/linux
initrd ${base-url}/initrd.gz
#imgargs linux auto=true url=http://yourserver/some/path/preseed.cfg
boot || goto failed
goto start

:xenclient-install
echo Booting XenClient 2.1 installer for ${initiator-iqn}
# XenClient doesn't seem to support installing to iSCSI volumes
# It only supports installing using iBFT
#set root-path ${base-iscsi}:${hostname}.boot.xenclient
#sanhook ${root-path} || goto failed
# The xenclient-2.1 folder is just the unpacked contents of the installer ISO
# Make sure you modify the isolinux.cfg and point it at your answer file URL
# You can find an example of the answer file in the "Setup and Usage Guide"
set 210:string ${boot-url}xenclient-2.1/isolinux/
set 209:string isolinux.cfg
set filename ${210:string}pxelinux.0
chain ${filename} || goto failed
goto start

:windows7-hookonly
echo Hooking Windows 7 iSCSI volume for ${initiator-iqn}
# Force gateway to be the iSCSI target server (kludge for stupid window behavior)
set netX/gateway ${iscsi-server}
# Hook iSCSI drive
set root-path ${base-iscsi}:${hostname}.boot.windows7
sanhook --drive 0x81 ${root-path} || goto failed
echo Start Windows 7 installer DVD from local drive
sanboot --no-describe --drive 0x80 ${sanboot-url}windows-7/ultimate-${arch}-en.iso || goto failed
goto start

###################### LIVE ENVIRONMENT MENU ########################

:menu-live
menu Live environments for ${initiator-iqn}
item openelec-generic-live     Boot OpenELEC Generic ${openelec-version} ${archl}
item ubuntu-live-1204          Boot Ubuntu LiveCD 12.04 ${archl}
item slitaz-live               Boot SliTaz 4.0 LiveCD
item smartos                   Boot SmartOS
item smartos-pre-ept           Boot SmartOS (pre-ept)
item kms-test                  Boot KMS test kernel
item tinycore-live-core        Boot TinyCoreLinux ${tc-version} Core
item tinycore-live-tinycore    Boot TinyCoreLinux ${tc-version} TinyCore
item tinycore-live-coreplus    Boot TinyCoreLinux ${tc-version} CorePlus
item coreos                    Boot CoreOS ${coreos-version}
item
item --key 0x08 back      Back to top menu...
iseq ${menu-default} menu-live && isset ${submenu-default} && goto menu-live-timed ||
choose selected && goto ${selected} || goto start
:menu-live-timed
choose --timeout ${submenu-timeout} --default ${submenu-default} selected && goto ${selected} || goto start

:openelec-generic-live
echo Booting OpenELEC Generic ${openelec-version} for ${initiator-iqn}
set base-url openelec-generic-${archl}-${openelec-version}
kernel ${base-url}/target/KERNEL
initrd ${base-url}/target/SYSTEM
# Config from: http://wiki.openelec.tv/index.php?title=Network_Boot_-_NFS
# and http://wiki.openelec.tv/index.php?title=Installation#Network_Boot_.28PXE.29
# NFS/NBD/iSCSI boot support only works on version >= 2 of OpenELEC
# The NFS server must be specified as an IP, name resolution doesn't work :(
imgargs KERNEL ip=dhcp boot=NFS=${nfs-server}:${nfs-root}${base-url}/target disk=NFS=${openelec-storage-dir} overlay
boot || goto failed
goto start

:ubuntu-live-1204
# See http://manpages.ubuntu.com/manpages/precise/man7/casper.7.html for casper cmdline details
echo Booting Ubuntu Live 12.04 ${archl} for ${initiator-iqn}
set base-url ubuntu-12.04-dvd-${archl}
kernel ${base-url}/casper/vmlinuz
initrd ${base-url}/casper/initrd.lz
imgargs vmlinuz root=/dev/nfs boot=casper netboot=nfs nfsroot=${nfs-server}:${nfs-root}${base-url} locale=en_US.UTF-8 keyboard-configuration/layoutcode=no mirror/country=NO
shell
boot || goto failed
goto start

:slitaz-live
echo Booting SliTaz 4.0 LiveCD for ${initiator-iqn}
set base-url slitaz-4.0/
kernel ${base-url}/boot/bzImage
initrd ${base-url}/boot/rootfs4.gz
initrd ${base-url}/boot/rootfs3.gz
initrd ${base-url}/boot/rootfs2.gz
initrd ${base-url}/boot/rootfs1.gz
imgargs bzImage rw root=/dev/null vga=normal autologin lang=en_US kmap=no-latin1
boot || goto failed
goto start

:smartos
echo Booting SmartOS for ${initiator-iqn}
# Hook iSCSI root volume (optional, not yet working)
sanhook ${base-iscsi}:${hostname}.boot.smartos ||
set base-url smartos
# See http://nahamu.github.com/2011/08/17/smartos-pxe.html for details
# See http://wiki.smartos.org/display/DOC/Getting+Started+with+SmartOS
# http://wiki.smartos.org/display/DOC/PXE+Booting+SmartOS
# http://wiki.smartos.org/display/DOC/SmartOS+Command+Line+Tips#SmartOSCommandLineTips-FiguringoutwheretoconfigureadditionalNetworkinterfacesorVLANs
# http://wiki.smartos.org/display/DOC/extra+configuration+options
# http://wiki.smartos.org/display/DOC/Managing+NICs
kernel ${base-url}/platform/i86pc/kernel/amd64/unix
initrd ${base-url}/platform/i86pc/amd64/boot_archive
# This doesn't work, but I would very much like it to
#initrd ${base-url}/config/${hostname}.txt /usbkey/config
# smartos=true to run smartos "installer" (and disable noimport=true)
# You can also run it manually, it's at /smartdc/bin/smartos_prompt_config.sh
# keyboard-layout=norway doesn't work anymore (it used to)
#imgargs unix -v -B console=text,standalone=true,noimport=true,keyboard-layout=norway,hostname=${hostname},root_shadow='${root-shadow}'
imgargs unix -B console=text,standalone=true,hostname=${hostname},admin_nic=${mac},admin_ip=dhcp,admin_gateway=dhcp,external_nic=${mac},external_ip=dhcp,external_gateway=dhcp,dns_resolvers=${dns},dns_domain=${domain},ntp_hosts=pool.ntp.org,root_shadow='${root-shadow}'
boot || goto failed
goto start

:smartos-pre-ept
echo Starting SmartOS (pre-ept branch) for ${initiator-iqn}
# pre-ept image downloaded from http://alpha.sysmgr.org/smartos-20120223-jmc2.iso
# Posted by LeftWing on #illumos / FreeNode at 2012-04-11 09:09 UTC+2
set base-url smartos/pre-ept
kernel ${base-url}/platform/i86pc/kernel/amd64/unix
module ${base-url}/platform/i86pc/amd64/boot_archive
imgargs unix -v -B console=text,standalone=true,noimport=true,root_shadow='${root-shadow}'
boot || goto failed
goto start

:kms-test
echo Booting KMS-enabled Linux kernel for ${initiator-iqn}
set base-url kms_test
kernel ${base-url}/vmlinuz
initrd ${base-url}/initrd ||
imgargs vmlinuz rw root=/dev/nfs nfsroot=${nfs-server}:/raid/kms_test ip=dhcp ||
boot || goto failed
goto start

# TinyCore is work-in-progress
# Current problems is that tce=/mnt/nfs/cde works, but dir is not writable by tc user,
# keymap is not loaded, and it seems like there is something I'm not understanding properly
# about the TC boot process
# More to read on http://distro.ibiblio.org/tinycorelinux/concepts.html
# and http://wiki.tinycorelinux.net/wiki:netbooting
:tinycore-live-core
echo Booting TinyCoreLinux Live Core ${tc-version} for ${inititator-iqn}
set base-url tinycore/Core-${tc-version}/
kernel ${base-url}/boot/vmlinuz
initrd ${base-url}/boot/core.gz
imgargs vmlinuz loglevel=3
boot || goto failed
goto start

:tinycore-live-tinycore
echo Booting TinyCoreLinux Live TinyCore ${tc-version} for ${inititator-iqn}
set base-url tinycore/TinyCore-${tc-version}
kernel ${base-url}/boot/vmlinuz
initrd ${base-url}/boot/core.gz
imgargs vmlinuz nfsmount=${nfs-server}:${nfs-root}${base-url} host=${hostname} lang=us kmap=nb loglevel=3 syslog  tce=/mnt/nfs/cde
boot || goto failed
goto start

:tinycore-live-coreplus
echo Booting TinyCoreLinux Live CorePlus ${tc-version} for ${inititator-iqn}
set base-url tinycore/CorePlus-${tc-version}
kernel ${base-url}/boot/vmlinuz
initrd ${base-url}/boot/core.gz
imgargs vmlinuz nfsmount=${nfs-server}:${nfs-root}${base-url} host=${hostname} lang=us kmap=nb loglevel=3 syslog  tce=/mnt/nfs/cde showapps desktop=flwm_topside
boot || goto failed
goto start

:coreos
echo Booting CoresOS ${coreos-version} for ${inititator-iqn}
#set base-url ${boot-url}/coreos/CorePlus-${tc-version}
set base-url http://storage.core-os.net/coreos/${archl}-generic/${coreos-version}
kernel ${base-url}/coreos_production_pxe.vmlinuz
initrd ${base-url}/coreos_production_pxe_image.cpio.gz
imgargs coreos_production_pxe.vmlinuz root=squashfs: state=tmpfs: sshkey="${coreos-sshkey}"
boot || goto failed
goto start