Template: netcfg/dhcp_hostname
Type: string
# :sl1:
_Description: DHCP hostname:
 You may need to supply a DHCP host name. If you are using
 a cable modem, you might need to specify an account number here.
 .
 Most other users can just leave this blank.

Template: netcfg/dhcp_progress
Type: text
# :sl1:
_Description: Configuring the network with DHCP

Template: netcfg/dhcp_progress_note
Type: text
# :sl1:
_Description: This may take some time.

Template: netcfg/dhcp_success_note
Type: text
# :sl1:
_Description: Network autoconfiguration has succeeded

Template: netcfg/no_dhcp_client
Type: error
# :sl2:
_Description: No DHCP client found
 No DHCP client was found. This package requires pump or dhcp-client.
 .
 The DHCP configuration process has been aborted.

Template: netcfg/dhcp_options
Type: select
# :sl1:
# Note to translators : Please keep your translation
# below a 65 columns limit (which means 65 characters
# in single-byte languages)
#flag:translate!:4
__Choices: Retry network autoconfiguration, Retry network autoconfiguration with a DHCP hostname, Configure network manually, ${wifireconf}, Do not configure the network at this time
Default: Configure network manually
# :sl1:
_Description: Network configuration method:
 From here you can choose to retry DHCP network autoconfiguration
 (which may succeed if your DHCP server takes a long time to respond)
 or to configure the network manually. Some DHCP servers require
 a DHCP hostname to be sent by the client, so you can also choose
 to retry DHCP network autoconfiguration with a hostname that you
 provide.

Template: netcfg/dhcp_failed
Type: note
# :sl1:
_Description: Network autoconfiguration failed
 Your network is probably not using the DHCP protocol. Alternatively, the
 DHCP server may be slow or some network hardware is not working properly.

Template: netcfg/no_default_route
Type: boolean
# :sl2:
_Description: Continue without a default route?
 The network autoconfiguration was successful. However, no default route
 was set: the system does not know how to communicate with hosts on the
 Internet. This will make it impossible to continue with the installation
 unless you have the first installation CD-ROM, a 'Netinst' CD-ROM, or
 packages available on the local network.
 .
 If you are unsure, you should not continue without a default route:
 contact your local network administrator about this problem.

Template: netcfg/internal-wifireconf
Type: text
# :sl1:
_Description: Reconfigure the wireless network

Template: netcfg/dhcp_timeout
Type: string
Description: for internal use; can be preseeded
 Timeout for trying DHCP
Default: 30

Template: netcfg/dhcp_ntp_servers
Type: text
Description: for internal use
 NTP servers provided by DHCP

Template: netcfg/slaac_wait_title
Type: text
# IPv6
# :sl2:
_Description: Attempting IPv6 autoconfiguration...

Template: netcfg/ipv6_link_local_wait_title
Type: text
# IPv6
# :sl2:
_Description: Waiting for link-local address...

Template: netcfg/ipv6_config_flags_wait_title
Type: text
# IPv6
# :sl2:
_Description: Attempting IPv6 autoconfiguration...

Template: netcfg/dhcpv6_timeout
Type: string
Description: for internal use; can be preseeded
 Timeout for trying DHCPv6
Default: 30

Template: netcfg/dhcpv6_progress
Type: text
# :sl2:
_Description: Configuring the network with DHCPv6