/* * Copyright (c) 2010 by Arduino LLC. All rights reserved. * * This file is free software; you can redistribute it and/or modify * it under the terms of either the GNU General Public License version 2 * or the GNU Lesser General Public License version 2.1, both as * published by the Free Software Foundation. */ #ifndef W5100_H_INCLUDED #define W5100_H_INCLUDED #include #define ETHERNET_SHIELD_SPI_CS 10 #define MAX_SOCK_NUM 4 typedef uint8_t SOCKET; #define IDM_OR 0x8000 #define IDM_AR0 0x8001 #define IDM_AR1 0x8002 #define IDM_DR 0x8003 /* class MR { public: static const uint8_t RST = 0x80; static const uint8_t PB = 0x10; static const uint8_t PPPOE = 0x08; static const uint8_t LB = 0x04; static const uint8_t AI = 0x02; static const uint8_t IND = 0x01; }; */ /* class IR { public: static const uint8_t CONFLICT = 0x80; static const uint8_t UNREACH = 0x40; static const uint8_t PPPoE = 0x20; static const uint8_t SOCK0 = 0x01; static const uint8_t SOCK1 = 0x02; static const uint8_t SOCK2 = 0x04; static const uint8_t SOCK3 = 0x08; static inline uint8_t SOCK(SOCKET ch) { return (0x01 << ch); }; }; */ class SnMR { public: static const uint8_t CLOSE = 0x00; static const uint8_t TCP = 0x01; static const uint8_t UDP = 0x02; static const uint8_t IPRAW = 0x03; static const uint8_t MACRAW = 0x04; static const uint8_t PPPOE = 0x05; static const uint8_t ND = 0x20; static const uint8_t MULTI = 0x80; }; enum SockCMD { Sock_OPEN = 0x01, Sock_LISTEN = 0x02, Sock_CONNECT = 0x04, Sock_DISCON = 0x08, Sock_CLOSE = 0x10, Sock_SEND = 0x20, Sock_SEND_MAC = 0x21, Sock_SEND_KEEP = 0x22, Sock_RECV = 0x40 }; /*class SnCmd { public: static const uint8_t OPEN = 0x01; static const uint8_t LISTEN = 0x02; static const uint8_t CONNECT = 0x04; static const uint8_t DISCON = 0x08; static const uint8_t CLOSE = 0x10; static const uint8_t SEND = 0x20; static const uint8_t SEND_MAC = 0x21; static const uint8_t SEND_KEEP = 0x22; static const uint8_t RECV = 0x40; }; */ class SnIR { public: static const uint8_t SEND_OK = 0x10; static const uint8_t TIMEOUT = 0x08; static const uint8_t RECV = 0x04; static const uint8_t DISCON = 0x02; static const uint8_t CON = 0x01; }; class SnSR { public: static const uint8_t CLOSED = 0x00; static const uint8_t INIT = 0x13; static const uint8_t LISTEN = 0x14; static const uint8_t SYNSENT = 0x15; static const uint8_t SYNRECV = 0x16; static const uint8_t ESTABLISHED = 0x17; static const uint8_t FIN_WAIT = 0x18; static const uint8_t CLOSING = 0x1A; static const uint8_t TIME_WAIT = 0x1B; static const uint8_t CLOSE_WAIT = 0x1C; static const uint8_t LAST_ACK = 0x1D; static const uint8_t UDP = 0x22; static const uint8_t IPRAW = 0x32; static const uint8_t MACRAW = 0x42; static const uint8_t PPPOE = 0x5F; }; class IPPROTO { public: static const uint8_t IP = 0; static const uint8_t ICMP = 1; static const uint8_t IGMP = 2; static const uint8_t GGP = 3; static const uint8_t TCP = 6; static const uint8_t PUP = 12; static const uint8_t UDP = 17; static const uint8_t IDP = 22; static const uint8_t ND = 77; static const uint8_t RAW = 255; }; class W5100Class { public: void init(); /** * @brief This function is being used for copy the data form Receive buffer of the chip to application buffer. * * It calculate the actual physical address where one has to read * the data from Receive buffer. Here also take care of the condition while it exceed * the Rx memory uper-bound of socket. */ void read_data(SOCKET s, volatile uint16_t src, volatile uint8_t * dst, uint16_t len); /** * @brief This function is being called by send() and sendto() function also. * * This function read the Tx write pointer register and after copy the data in buffer update the Tx write pointer * register. User should read upper byte first and lower byte later to get proper value. */ void send_data_processing(SOCKET s, const uint8_t *data, uint16_t len); /** * @brief A copy of send_data_processing that uses the provided ptr for the * write offset. Only needed for the "streaming" UDP API, where * a single UDP packet is built up over a number of calls to * send_data_processing_ptr, because TX_WR doesn't seem to get updated * correctly in those scenarios * @param ptr value to use in place of TX_WR. If 0, then the value is read * in from TX_WR * @return New value for ptr, to be used in the next call */ // FIXME Update documentation void send_data_processing_offset(SOCKET s, uint16_t data_offset, const uint8_t *data, uint16_t len); /** * @brief This function is being called by recv() also. * * This function read the Rx read pointer register * and after copy the data from receive buffer update the Rx write pointer register. * User should read upper byte first and lower byte later to get proper value. */ void recv_data_processing(SOCKET s, uint8_t *data, uint16_t len, uint8_t peek = 0); inline void setGatewayIp(uint8_t *_addr); inline void getGatewayIp(uint8_t *_addr); inline void setSubnetMask(uint8_t *_addr); inline void getSubnetMask(uint8_t *_addr); inline void setMACAddress(uint8_t * addr); inline void getMACAddress(uint8_t * addr); inline void setIPAddress(uint8_t * addr); inline void getIPAddress(uint8_t * addr); inline void setRetransmissionTime(uint16_t timeout); inline void setRetransmissionCount(uint8_t _retry); void execCmdSn(SOCKET s, SockCMD _cmd); uint16_t getTXFreeSize(SOCKET s); uint16_t getRXReceivedSize(SOCKET s); // W5100 Registers // --------------- private: static uint8_t write(uint16_t _addr, uint8_t _data); static uint16_t write(uint16_t addr, const uint8_t *buf, uint16_t len); static uint8_t read(uint16_t addr); static uint16_t read(uint16_t addr, uint8_t *buf, uint16_t len); #define __GP_REGISTER8(name, address) \ static inline void write##name(uint8_t _data) { \ write(address, _data); \ } \ static inline uint8_t read##name() { \ return read(address); \ } #define __GP_REGISTER16(name, address) \ static void write##name(uint16_t _data) { \ write(address, _data >> 8); \ write(address+1, _data & 0xFF); \ } \ static uint16_t read##name() { \ uint16_t res = read(address); \ res = (res << 8) + read(address + 1); \ return res; \ } #define __GP_REGISTER_N(name, address, size) \ static uint16_t write##name(uint8_t *_buff) { \ return write(address, _buff, size); \ } \ static uint16_t read##name(uint8_t *_buff) { \ return read(address, _buff, size); \ } public: __GP_REGISTER8 (MR, 0x0000); // Mode __GP_REGISTER_N(GAR, 0x0001, 4); // Gateway IP address __GP_REGISTER_N(SUBR, 0x0005, 4); // Subnet mask address __GP_REGISTER_N(SHAR, 0x0009, 6); // Source MAC address __GP_REGISTER_N(SIPR, 0x000F, 4); // Source IP address __GP_REGISTER8 (IR, 0x0015); // Interrupt __GP_REGISTER8 (IMR, 0x0016); // Interrupt Mask __GP_REGISTER16(RTR, 0x0017); // Timeout address __GP_REGISTER8 (RCR, 0x0019); // Retry count __GP_REGISTER8 (RMSR, 0x001A); // Receive memory size __GP_REGISTER8 (TMSR, 0x001B); // Transmit memory size __GP_REGISTER8 (PATR, 0x001C); // Authentication type address in PPPoE mode __GP_REGISTER8 (PTIMER, 0x0028); // PPP LCP Request Timer __GP_REGISTER8 (PMAGIC, 0x0029); // PPP LCP Magic Number __GP_REGISTER_N(UIPR, 0x002A, 4); // Unreachable IP address in UDP mode __GP_REGISTER16(UPORT, 0x002E); // Unreachable Port address in UDP mode #undef __GP_REGISTER8 #undef __GP_REGISTER16 #undef __GP_REGISTER_N // W5100 Socket registers // ---------------------- private: static inline uint8_t readSn(SOCKET _s, uint16_t _addr); static inline uint8_t writeSn(SOCKET _s, uint16_t _addr, uint8_t _data); static inline uint16_t readSn(SOCKET _s, uint16_t _addr, uint8_t *_buf, uint16_t len); static inline uint16_t writeSn(SOCKET _s, uint16_t _addr, uint8_t *_buf, uint16_t len); static const uint16_t CH_BASE = 0x0400; static const uint16_t CH_SIZE = 0x0100; #define __SOCKET_REGISTER8(name, address) \ static inline void write##name(SOCKET _s, uint8_t _data) { \ writeSn(_s, address, _data); \ } \ static inline uint8_t read##name(SOCKET _s) { \ return readSn(_s, address); \ } #define __SOCKET_REGISTER16(name, address) \ static void write##name(SOCKET _s, uint16_t _data) { \ writeSn(_s, address, _data >> 8); \ writeSn(_s, address+1, _data & 0xFF); \ } \ static uint16_t read##name(SOCKET _s) { \ uint16_t res = readSn(_s, address); \ uint16_t res2 = readSn(_s,address + 1); \ res = res << 8; \ res2 = res2 & 0xFF; \ res = res | res2; \ return res; \ } #define __SOCKET_REGISTER_N(name, address, size) \ static uint16_t write##name(SOCKET _s, uint8_t *_buff) { \ return writeSn(_s, address, _buff, size); \ } \ static uint16_t read##name(SOCKET _s, uint8_t *_buff) { \ return readSn(_s, address, _buff, size); \ } public: __SOCKET_REGISTER8(SnMR, 0x0000) // Mode __SOCKET_REGISTER8(SnCR, 0x0001) // Command __SOCKET_REGISTER8(SnIR, 0x0002) // Interrupt __SOCKET_REGISTER8(SnSR, 0x0003) // Status __SOCKET_REGISTER16(SnPORT, 0x0004) // Source Port __SOCKET_REGISTER_N(SnDHAR, 0x0006, 6) // Destination Hardw Addr __SOCKET_REGISTER_N(SnDIPR, 0x000C, 4) // Destination IP Addr __SOCKET_REGISTER16(SnDPORT, 0x0010) // Destination Port __SOCKET_REGISTER16(SnMSSR, 0x0012) // Max Segment Size __SOCKET_REGISTER8(SnPROTO, 0x0014) // Protocol in IP RAW Mode __SOCKET_REGISTER8(SnTOS, 0x0015) // IP TOS __SOCKET_REGISTER8(SnTTL, 0x0016) // IP TTL __SOCKET_REGISTER16(SnTX_FSR, 0x0020) // TX Free Size __SOCKET_REGISTER16(SnTX_RD, 0x0022) // TX Read Pointer __SOCKET_REGISTER16(SnTX_WR, 0x0024) // TX Write Pointer __SOCKET_REGISTER16(SnRX_RSR, 0x0026) // RX Free Size __SOCKET_REGISTER16(SnRX_RD, 0x0028) // RX Read Pointer __SOCKET_REGISTER16(SnRX_WR, 0x002A) // RX Write Pointer (supported?) #undef __SOCKET_REGISTER8 #undef __SOCKET_REGISTER16 #undef __SOCKET_REGISTER_N private: static const uint8_t RST = 7; // Reset BIT static const int SOCKETS = 4; static const uint16_t SMASK = 0x07FF; // Tx buffer MASK static const uint16_t RMASK = 0x07FF; // Rx buffer MASK public: static const uint16_t SSIZE = 2048; // Max Tx buffer size private: static const uint16_t RSIZE = 2048; // Max Rx buffer size uint16_t SBASE[SOCKETS]; // Tx buffer base address uint16_t RBASE[SOCKETS]; // Rx buffer base address private: #if !defined(SPI_HAS_EXTENDED_CS_PIN_HANDLING) #define SPI_ETHERNET_SETTINGS SPISettings(4000000, MSBFIRST, SPI_MODE0) #if defined(ARDUINO_ARCH_AVR) #if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) inline static void initSS() { DDRB |= _BV(4); }; inline static void setSS() { PORTB &= ~_BV(4); }; inline static void resetSS() { PORTB |= _BV(4); }; #elif defined(__AVR_ATmega32U4__) inline static void initSS() { DDRB |= _BV(6); }; inline static void setSS() { PORTB &= ~_BV(6); }; inline static void resetSS() { PORTB |= _BV(6); }; #elif defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB162__) inline static void initSS() { DDRB |= _BV(0); }; inline static void setSS() { PORTB &= ~_BV(0); }; inline static void resetSS() { PORTB |= _BV(0); }; #else inline static void initSS() { DDRB |= _BV(2); }; inline static void setSS() { PORTB &= ~_BV(2); }; inline static void resetSS() { PORTB |= _BV(2); }; #endif #else inline static void initSS() { *portModeRegister(digitalPinToPort(ETHERNET_SHIELD_SPI_CS)) |= digitalPinToBitMask(ETHERNET_SHIELD_SPI_CS); } inline static void setSS() { *portOutputRegister(digitalPinToPort(ETHERNET_SHIELD_SPI_CS)) &= ~digitalPinToBitMask(ETHERNET_SHIELD_SPI_CS); } inline static void resetSS() { *portOutputRegister(digitalPinToPort(ETHERNET_SHIELD_SPI_CS)) |= digitalPinToBitMask(ETHERNET_SHIELD_SPI_CS); } #endif #else #define SPI_ETHERNET_SETTINGS ETHERNET_SHIELD_SPI_CS,SPISettings(4000000, MSBFIRST, SPI_MODE0) // initSS(), setSS(), resetSS() not needed with EXTENDED_CS_PIN_HANDLING #endif }; extern W5100Class W5100; uint8_t W5100Class::readSn(SOCKET _s, uint16_t _addr) { return read(CH_BASE + _s * CH_SIZE + _addr); } uint8_t W5100Class::writeSn(SOCKET _s, uint16_t _addr, uint8_t _data) { return write(CH_BASE + _s * CH_SIZE + _addr, _data); } uint16_t W5100Class::readSn(SOCKET _s, uint16_t _addr, uint8_t *_buf, uint16_t _len) { return read(CH_BASE + _s * CH_SIZE + _addr, _buf, _len); } uint16_t W5100Class::writeSn(SOCKET _s, uint16_t _addr, uint8_t *_buf, uint16_t _len) { return write(CH_BASE + _s * CH_SIZE + _addr, _buf, _len); } void W5100Class::getGatewayIp(uint8_t *_addr) { readGAR(_addr); } void W5100Class::setGatewayIp(uint8_t *_addr) { writeGAR(_addr); } void W5100Class::getSubnetMask(uint8_t *_addr) { readSUBR(_addr); } void W5100Class::setSubnetMask(uint8_t *_addr) { writeSUBR(_addr); } void W5100Class::getMACAddress(uint8_t *_addr) { readSHAR(_addr); } void W5100Class::setMACAddress(uint8_t *_addr) { writeSHAR(_addr); } void W5100Class::getIPAddress(uint8_t *_addr) { readSIPR(_addr); } void W5100Class::setIPAddress(uint8_t *_addr) { writeSIPR(_addr); } void W5100Class::setRetransmissionTime(uint16_t _timeout) { writeRTR(_timeout); } void W5100Class::setRetransmissionCount(uint8_t _retry) { writeRCR(_retry); } #endif