/* Definitions of target machine for GNU compiler. Vitesse IQ2000 processors Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc. This file is part of GCC. GCC is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. GCC is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GCC; see the file COPYING. If not, write to the Free Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ /* Driver configuration. */ #undef SWITCH_TAKES_ARG #define SWITCH_TAKES_ARG(CHAR) \ (DEFAULT_SWITCH_TAKES_ARG (CHAR) || (CHAR) == 'G') /* The svr4.h LIB_SPEC with -leval and --*group tacked on */ #undef LIB_SPEC #define LIB_SPEC "%{!shared:%{!symbolic:--start-group -lc -leval -lgcc --end-group}}" #undef STARTFILE_SPEC #undef ENDFILE_SPEC /* Run-time target specifications. */ #define TARGET_CPU_CPP_BUILTINS() \ do \ { \ builtin_define ("__iq2000__"); \ builtin_assert ("cpu=iq2000"); \ builtin_assert ("machine=iq2000"); \ } \ while (0) /* Macros used in the machine description to test the flags. */ #define TARGET_STATS 0 #define TARGET_DEBUG_MODE 0 #define TARGET_DEBUG_A_MODE 0 #define TARGET_DEBUG_B_MODE 0 #define TARGET_DEBUG_C_MODE 0 #define TARGET_DEBUG_D_MODE 0 #ifndef IQ2000_ISA_DEFAULT #define IQ2000_ISA_DEFAULT 1 #endif #define IQ2000_VERSION "[1.0]" #ifndef MACHINE_TYPE #define MACHINE_TYPE "IQ2000" #endif #ifndef TARGET_VERSION_INTERNAL #define TARGET_VERSION_INTERNAL(STREAM) \ fprintf (STREAM, " %s %s", IQ2000_VERSION, MACHINE_TYPE) #endif #ifndef TARGET_VERSION #define TARGET_VERSION TARGET_VERSION_INTERNAL (stderr) #endif #define OVERRIDE_OPTIONS override_options () #define CAN_DEBUG_WITHOUT_FP /* Storage Layout. */ #define BITS_BIG_ENDIAN 0 #define BYTES_BIG_ENDIAN 1 #define WORDS_BIG_ENDIAN 1 #define LIBGCC2_WORDS_BIG_ENDIAN 1 #define BITS_PER_WORD 32 #define MAX_BITS_PER_WORD 64 #define UNITS_PER_WORD 4 #define MIN_UNITS_PER_WORD 4 #define POINTER_SIZE 32 /* Define this macro if it is advisable to hold scalars in registers in a wider mode than that declared by the program. In such cases, the value is constrained to be within the bounds of the declared type, but kept valid in the wider mode. The signedness of the extension may differ from that of the type. We promote any value smaller than SImode up to SImode. */ #define PROMOTE_MODE(MODE, UNSIGNEDP, TYPE) \ if (GET_MODE_CLASS (MODE) == MODE_INT \ && GET_MODE_SIZE (MODE) < 4) \ (MODE) = SImode; #define PARM_BOUNDARY 32 #define STACK_BOUNDARY 64 #define FUNCTION_BOUNDARY 32 #define BIGGEST_ALIGNMENT 64 #undef DATA_ALIGNMENT #define DATA_ALIGNMENT(TYPE, ALIGN) \ ((((ALIGN) < BITS_PER_WORD) \ && (TREE_CODE (TYPE) == ARRAY_TYPE \ || TREE_CODE (TYPE) == UNION_TYPE \ || TREE_CODE (TYPE) == RECORD_TYPE)) ? BITS_PER_WORD : (ALIGN)) #define CONSTANT_ALIGNMENT(EXP, ALIGN) \ ((TREE_CODE (EXP) == STRING_CST || TREE_CODE (EXP) == CONSTRUCTOR) \ && (ALIGN) < BITS_PER_WORD ? BITS_PER_WORD : (ALIGN)) #define EMPTY_FIELD_BOUNDARY 32 #define STRUCTURE_SIZE_BOUNDARY 8 #define STRICT_ALIGNMENT 1 #define PCC_BITFIELD_TYPE_MATTERS 1 #define TARGET_FLOAT_FORMAT IEEE_FLOAT_FORMAT /* Layout of Source Language Data Types. */ #define INT_TYPE_SIZE 32 #define SHORT_TYPE_SIZE 16 #define LONG_TYPE_SIZE 32 #define LONG_LONG_TYPE_SIZE 64 #define CHAR_TYPE_SIZE BITS_PER_UNIT #define FLOAT_TYPE_SIZE 32 #define DOUBLE_TYPE_SIZE 64 #define LONG_DOUBLE_TYPE_SIZE 64 #define DEFAULT_SIGNED_CHAR 1 /* Register Basics. */ /* On the IQ2000, we have 32 integer registers. */ #define FIRST_PSEUDO_REGISTER 33 #define FIXED_REGISTERS \ { \ 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 0, 1, 1 \ } #define CALL_USED_REGISTERS \ { \ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \ 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 0, 1, 1 \ } /* Order of allocation of registers. */ #define REG_ALLOC_ORDER \ { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, \ 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31 \ } /* How Values Fit in Registers. */ #define HARD_REGNO_NREGS(REGNO, MODE) \ ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD) #define HARD_REGNO_MODE_OK(REGNO, MODE) \ ((REGNO_REG_CLASS (REGNO) == GR_REGS) \ ? ((REGNO) & 1) == 0 || GET_MODE_SIZE (MODE) <= 4 \ : ((REGNO) & 1) == 0 || GET_MODE_SIZE (MODE) == 4) #define MODES_TIEABLE_P(MODE1, MODE2) \ ((GET_MODE_CLASS (MODE1) == MODE_FLOAT || \ GET_MODE_CLASS (MODE1) == MODE_COMPLEX_FLOAT) \ == (GET_MODE_CLASS (MODE2) == MODE_FLOAT || \ GET_MODE_CLASS (MODE2) == MODE_COMPLEX_FLOAT)) #define AVOID_CCMODE_COPIES /* Register Classes. */ enum reg_class { NO_REGS, /* No registers in set. */ GR_REGS, /* Integer registers. */ ALL_REGS, /* All registers. */ LIM_REG_CLASSES /* Max value + 1. */ }; #define GENERAL_REGS GR_REGS #define N_REG_CLASSES (int) LIM_REG_CLASSES #define REG_CLASS_NAMES \ { \ "NO_REGS", \ "GR_REGS", \ "ALL_REGS" \ } #define REG_CLASS_CONTENTS \ { \ { 0x00000000, 0x00000000 }, /* No registers, */ \ { 0xffffffff, 0x00000000 }, /* Integer registers. */ \ { 0xffffffff, 0x00000001 } /* All registers. */ \ } #define REGNO_REG_CLASS(REGNO) \ ((REGNO) <= GP_REG_LAST + 1 ? GR_REGS : NO_REGS) #define BASE_REG_CLASS (GR_REGS) #define INDEX_REG_CLASS NO_REGS #define REG_CLASS_FROM_LETTER(C) \ ((C) == 'd' ? GR_REGS : \ (C) == 'b' ? ALL_REGS : \ (C) == 'y' ? GR_REGS : \ NO_REGS) #define REGNO_OK_FOR_INDEX_P(regno) 0 #define PREFERRED_RELOAD_CLASS(X,CLASS) \ ((CLASS) != ALL_REGS \ ? (CLASS) \ : ((GET_MODE_CLASS (GET_MODE (X)) == MODE_FLOAT \ || GET_MODE_CLASS (GET_MODE (X)) == MODE_COMPLEX_FLOAT) \ ? (GR_REGS) \ : ((GET_MODE_CLASS (GET_MODE (X)) == MODE_INT \ || GET_MODE (X) == VOIDmode) \ ? (GR_REGS) \ : (CLASS)))) #define SMALL_REGISTER_CLASSES 0 #define CLASS_MAX_NREGS(CLASS, MODE) \ ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD) /* For IQ2000: `I' is used for the range of constants an arithmetic insn can actually contain (16 bits signed integers). `J' is used for the range which is just zero (i.e., $r0). `K' is used for the range of constants a logical insn can actually contain (16 bit zero-extended integers). `L' is used for the range of constants that be loaded with lui (i.e., the bottom 16 bits are zero). `M' is used for the range of constants that take two words to load (i.e., not matched by `I', `K', and `L'). `N' is used for constants 0xffffnnnn or 0xnnnnffff `O' is a 5 bit zero-extended integer. */ #define CONST_OK_FOR_LETTER_P(VALUE, C) \ ((C) == 'I' ? ((unsigned HOST_WIDE_INT) ((VALUE) + 0x8000) < 0x10000) \ : (C) == 'J' ? ((VALUE) == 0) \ : (C) == 'K' ? ((unsigned HOST_WIDE_INT) (VALUE) < 0x10000) \ : (C) == 'L' ? (((VALUE) & 0x0000ffff) == 0 \ && (((VALUE) & ~2147483647) == 0 \ || ((VALUE) & ~2147483647) == ~2147483647)) \ : (C) == 'M' ? ((((VALUE) & ~0x0000ffff) != 0) \ && (((VALUE) & ~0x0000ffff) != ~0x0000ffff) \ && (((VALUE) & 0x0000ffff) != 0 \ || (((VALUE) & ~2147483647) != 0 \ && ((VALUE) & ~2147483647) != ~2147483647))) \ : (C) == 'N' ? ((((VALUE) & 0xffff) == 0xffff) \ || (((VALUE) & 0xffff0000) == 0xffff0000)) \ : (C) == 'O' ? ((unsigned HOST_WIDE_INT) ((VALUE) + 0x20) < 0x40) \ : 0) #define CONST_DOUBLE_OK_FOR_LETTER_P(VALUE, C) \ ((C) == 'G' \ && (VALUE) == CONST0_RTX (GET_MODE (VALUE))) /* `R' is for memory references which take 1 word for the instruction. */ #define EXTRA_CONSTRAINT(OP,CODE) \ (((CODE) == 'R') ? simple_memory_operand (OP, GET_MODE (OP)) \ : FALSE) /* Basic Stack Layout. */ #define STACK_GROWS_DOWNWARD #define FRAME_GROWS_DOWNWARD 0 #define STARTING_FRAME_OFFSET \ (current_function_outgoing_args_size) /* Use the default value zero. */ /* #define STACK_POINTER_OFFSET 0 */ #define FIRST_PARM_OFFSET(FNDECL) 0 /* The return address for the current frame is in r31 if this is a leaf function. Otherwise, it is on the stack. It is at a variable offset from sp/fp/ap, so we define a fake hard register rap which is a pointer to the return address on the stack. This always gets eliminated during reload to be either the frame pointer or the stack pointer plus an offset. */ #define RETURN_ADDR_RTX(count, frame) \ (((count) == 0) \ ? (leaf_function_p () \ ? gen_rtx_REG (Pmode, GP_REG_FIRST + 31) \ : gen_rtx_MEM (Pmode, gen_rtx_REG (Pmode, \ RETURN_ADDRESS_POINTER_REGNUM))) \ : (rtx) 0) /* Before the prologue, RA lives in r31. */ #define INCOMING_RETURN_ADDR_RTX gen_rtx_REG (VOIDmode, GP_REG_FIRST + 31) /* Register That Address the Stack Frame. */ #define STACK_POINTER_REGNUM (GP_REG_FIRST + 29) #define FRAME_POINTER_REGNUM (GP_REG_FIRST + 1) #define HARD_FRAME_POINTER_REGNUM (GP_REG_FIRST + 27) #define ARG_POINTER_REGNUM GP_REG_FIRST #define RETURN_ADDRESS_POINTER_REGNUM RAP_REG_NUM #define STATIC_CHAIN_REGNUM (GP_REG_FIRST + 2) /* Eliminating the Frame Pointer and the Arg Pointer. */ #define FRAME_POINTER_REQUIRED 0 #define ELIMINABLE_REGS \ {{ ARG_POINTER_REGNUM, STACK_POINTER_REGNUM}, \ { ARG_POINTER_REGNUM, HARD_FRAME_POINTER_REGNUM}, \ { RETURN_ADDRESS_POINTER_REGNUM, STACK_POINTER_REGNUM}, \ { RETURN_ADDRESS_POINTER_REGNUM, HARD_FRAME_POINTER_REGNUM}, \ { RETURN_ADDRESS_POINTER_REGNUM, GP_REG_FIRST + 31}, \ { FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}, \ { FRAME_POINTER_REGNUM, HARD_FRAME_POINTER_REGNUM}} /* We can always eliminate to the frame pointer. We can eliminate to the stack pointer unless a frame pointer is needed. */ #define CAN_ELIMINATE(FROM, TO) \ (((FROM) == RETURN_ADDRESS_POINTER_REGNUM && (! leaf_function_p () \ || (TO == GP_REG_FIRST + 31 && leaf_function_p))) \ || ((FROM) != RETURN_ADDRESS_POINTER_REGNUM \ && ((TO) == HARD_FRAME_POINTER_REGNUM \ || ((TO) == STACK_POINTER_REGNUM && ! frame_pointer_needed)))) #define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET) \ (OFFSET) = iq2000_initial_elimination_offset ((FROM), (TO)) /* Passing Function Arguments on the Stack. */ /* #define PUSH_ROUNDING(BYTES) 0 */ #define ACCUMULATE_OUTGOING_ARGS 1 #define REG_PARM_STACK_SPACE(FNDECL) 0 #define OUTGOING_REG_PARM_STACK_SPACE #define RETURN_POPS_ARGS(FUNDECL,FUNTYPE,SIZE) 0 /* Function Arguments in Registers. */ #define FUNCTION_ARG(CUM, MODE, TYPE, NAMED) \ function_arg (& CUM, MODE, TYPE, NAMED) #define MAX_ARGS_IN_REGISTERS 8 typedef struct iq2000_args { int gp_reg_found; /* Whether a gp register was found yet. */ unsigned int arg_number; /* Argument number. */ unsigned int arg_words; /* # total words the arguments take. */ unsigned int fp_arg_words; /* # words for FP args (IQ2000_EABI only). */ int last_arg_fp; /* Nonzero if last arg was FP (EABI only). */ int fp_code; /* Mode of FP arguments. */ unsigned int num_adjusts; /* Number of adjustments made. */ /* Adjustments made to args pass in regs. */ struct rtx_def * adjust[MAX_ARGS_IN_REGISTERS * 2]; } CUMULATIVE_ARGS; /* Initialize a variable CUM of type CUMULATIVE_ARGS for a call to a function whose data type is FNTYPE. For a library call, FNTYPE is 0. */ #define INIT_CUMULATIVE_ARGS(CUM, FNTYPE, LIBNAME, INDIRECT, N_NAMED_ARGS) \ init_cumulative_args (& CUM, FNTYPE, LIBNAME) \ #define FUNCTION_ARG_ADVANCE(CUM, MODE, TYPE, NAMED) \ function_arg_advance (& CUM, MODE, TYPE, NAMED) #define FUNCTION_ARG_PADDING(MODE, TYPE) \ (! BYTES_BIG_ENDIAN \ ? upward \ : (((MODE) == BLKmode \ ? ((TYPE) && TREE_CODE (TYPE_SIZE (TYPE)) == INTEGER_CST \ && int_size_in_bytes (TYPE) < (PARM_BOUNDARY / BITS_PER_UNIT))\ : (GET_MODE_BITSIZE (MODE) < PARM_BOUNDARY \ && (GET_MODE_CLASS (MODE) == MODE_INT))) \ ? downward : upward)) #define FUNCTION_ARG_BOUNDARY(MODE, TYPE) \ (((TYPE) != 0) \ ? ((TYPE_ALIGN(TYPE) <= PARM_BOUNDARY) \ ? PARM_BOUNDARY \ : TYPE_ALIGN(TYPE)) \ : ((GET_MODE_ALIGNMENT(MODE) <= PARM_BOUNDARY) \ ? PARM_BOUNDARY \ : GET_MODE_ALIGNMENT(MODE))) #define FUNCTION_ARG_REGNO_P(N) \ (((N) >= GP_ARG_FIRST && (N) <= GP_ARG_LAST)) /* How Scalar Function Values are Returned. */ #define FUNCTION_VALUE(VALTYPE, FUNC) iq2000_function_value (VALTYPE, FUNC) #define LIBCALL_VALUE(MODE) \ gen_rtx_REG (((GET_MODE_CLASS (MODE) != MODE_INT \ || GET_MODE_SIZE (MODE) >= 4) \ ? (MODE) \ : SImode), \ GP_RETURN) /* On the IQ2000, R2 and R3 are the only register thus used. */ #define FUNCTION_VALUE_REGNO_P(N) ((N) == GP_RETURN) /* How Large Values are Returned. */ #define DEFAULT_PCC_STRUCT_RETURN 0 /* Function Entry and Exit. */ #define EXIT_IGNORE_STACK 1 /* Generating Code for Profiling. */ #define FUNCTION_PROFILER(FILE, LABELNO) \ { \ fprintf (FILE, "\t.set\tnoreorder\n"); \ fprintf (FILE, "\t.set\tnoat\n"); \ fprintf (FILE, "\tmove\t%s,%s\t\t# save current return address\n", \ reg_names[GP_REG_FIRST + 1], reg_names[GP_REG_FIRST + 31]); \ fprintf (FILE, "\tjal\t_mcount\n"); \ fprintf (FILE, \ "\t%s\t%s,%s,%d\t\t# _mcount pops 2 words from stack\n", \ "subu", \ reg_names[STACK_POINTER_REGNUM], \ reg_names[STACK_POINTER_REGNUM], \ Pmode == DImode ? 16 : 8); \ fprintf (FILE, "\t.set\treorder\n"); \ fprintf (FILE, "\t.set\tat\n"); \ } /* Implementing the Varargs Macros. */ #define EXPAND_BUILTIN_VA_START(valist, nextarg) \ iq2000_va_start (valist, nextarg) /* Trampolines for Nested Functions. */ /* A C statement to output, on the stream FILE, assembler code for a block of data that contains the constant parts of a trampoline. This code should not include a label--the label is taken care of automatically. */ #define TRAMPOLINE_TEMPLATE(STREAM) \ { \ fprintf (STREAM, "\t.word\t0x03e00821\t\t# move $1,$31\n"); \ fprintf (STREAM, "\t.word\t0x04110001\t\t# bgezal $0,.+8\n"); \ fprintf (STREAM, "\t.word\t0x00000000\t\t# nop\n"); \ if (Pmode == DImode) \ { \ fprintf (STREAM, "\t.word\t0xdfe30014\t\t# ld $3,20($31)\n"); \ fprintf (STREAM, "\t.word\t0xdfe2001c\t\t# ld $2,28($31)\n"); \ } \ else \ { \ fprintf (STREAM, "\t.word\t0x8fe30014\t\t# lw $3,20($31)\n"); \ fprintf (STREAM, "\t.word\t0x8fe20018\t\t# lw $2,24($31)\n"); \ } \ fprintf (STREAM, "\t.word\t0x0060c821\t\t# move $25,$3 (abicalls)\n"); \ fprintf (STREAM, "\t.word\t0x00600008\t\t# jr $3\n"); \ fprintf (STREAM, "\t.word\t0x0020f821\t\t# move $31,$1\n"); \ fprintf (STREAM, "\t.word\t0x00000000\t\t# \n"); \ fprintf (STREAM, "\t.word\t0x00000000\t\t# \n"); \ } #define TRAMPOLINE_SIZE (40) #define TRAMPOLINE_ALIGNMENT 32 #define INITIALIZE_TRAMPOLINE(ADDR, FUNC, CHAIN) \ { \ rtx addr = ADDR; \ emit_move_insn (gen_rtx_MEM (SImode, plus_constant (addr, 32)), FUNC); \ emit_move_insn (gen_rtx_MEM (SImode, plus_constant (addr, 36)), CHAIN);\ } /* Addressing Modes. */ #define CONSTANT_ADDRESS_P(X) \ ( (GET_CODE (X) == LABEL_REF || GET_CODE (X) == SYMBOL_REF \ || GET_CODE (X) == CONST_INT || GET_CODE (X) == HIGH \ || (GET_CODE (X) == CONST))) #define MAX_REGS_PER_ADDRESS 1 #ifdef REG_OK_STRICT #define GO_IF_LEGITIMATE_ADDRESS(MODE, X, ADDR) \ { \ if (iq2000_legitimate_address_p (MODE, X, 1)) \ goto ADDR; \ } #else #define GO_IF_LEGITIMATE_ADDRESS(MODE, X, ADDR) \ { \ if (iq2000_legitimate_address_p (MODE, X, 0)) \ goto ADDR; \ } #endif #define REG_OK_FOR_INDEX_P(X) 0 /* For the IQ2000, transform: memory(X + ) into: Y = & ~0x7fff; Z = X + Y memory (Z + ( & 0x7fff)); */ #define LEGITIMIZE_ADDRESS(X,OLDX,MODE,WIN) \ { \ rtx xinsn = (X); \ \ if (TARGET_DEBUG_B_MODE) \ { \ GO_PRINTF ("\n========== LEGITIMIZE_ADDRESS\n"); \ GO_DEBUG_RTX (xinsn); \ } \ \ if (iq2000_check_split (X, MODE)) \ { \ X = gen_rtx_LO_SUM (Pmode, \ copy_to_mode_reg (Pmode, \ gen_rtx_HIGH (Pmode, X)), \ X); \ goto WIN; \ } \ \ if (GET_CODE (xinsn) == PLUS) \ { \ rtx xplus0 = XEXP (xinsn, 0); \ rtx xplus1 = XEXP (xinsn, 1); \ enum rtx_code code0 = GET_CODE (xplus0); \ enum rtx_code code1 = GET_CODE (xplus1); \ \ if (code0 != REG && code1 == REG) \ { \ xplus0 = XEXP (xinsn, 1); \ xplus1 = XEXP (xinsn, 0); \ code0 = GET_CODE (xplus0); \ code1 = GET_CODE (xplus1); \ } \ \ if (code0 == REG && REG_MODE_OK_FOR_BASE_P (xplus0, MODE) \ && code1 == CONST_INT && !SMALL_INT (xplus1)) \ { \ rtx int_reg = gen_reg_rtx (Pmode); \ rtx ptr_reg = gen_reg_rtx (Pmode); \ \ emit_move_insn (int_reg, \ GEN_INT (INTVAL (xplus1) & ~ 0x7fff)); \ \ emit_insn (gen_rtx_SET (VOIDmode, \ ptr_reg, \ gen_rtx_PLUS (Pmode, xplus0, int_reg))); \ \ X = plus_constant (ptr_reg, INTVAL (xplus1) & 0x7fff); \ goto WIN; \ } \ } \ \ if (TARGET_DEBUG_B_MODE) \ GO_PRINTF ("LEGITIMIZE_ADDRESS could not fix.\n"); \ } #define GO_IF_MODE_DEPENDENT_ADDRESS(ADDR,LABEL) {} #define LEGITIMATE_CONSTANT_P(X) (1) /* Describing Relative Costs of Operations. */ #define REGISTER_MOVE_COST(MODE, FROM, TO) 2 #define MEMORY_MOVE_COST(MODE,CLASS,TO_P) \ (TO_P ? 2 : 16) #define BRANCH_COST 2 #define SLOW_BYTE_ACCESS 1 #define NO_FUNCTION_CSE 1 #define ADJUST_COST(INSN,LINK,DEP_INSN,COST) \ if (REG_NOTE_KIND (LINK) != 0) \ (COST) = 0; /* Anti or output dependence. */ /* Dividing the output into sections. */ #define TEXT_SECTION_ASM_OP "\t.text" /* Instructions. */ #define DATA_SECTION_ASM_OP "\t.data" /* Large data. */ /* The Overall Framework of an Assembler File. */ #define ASM_COMMENT_START " #" #define ASM_APP_ON "#APP\n" #define ASM_APP_OFF "#NO_APP\n" /* Output and Generation of Labels. */ #undef ASM_GENERATE_INTERNAL_LABEL #define ASM_GENERATE_INTERNAL_LABEL(LABEL,PREFIX,NUM) \ sprintf ((LABEL), "*%s%s%ld", (LOCAL_LABEL_PREFIX), (PREFIX), (long) (NUM)) #define GLOBAL_ASM_OP "\t.globl\t" /* Output of Assembler Instructions. */ #define REGISTER_NAMES \ { \ "%0", "%1", "%2", "%3", "%4", "%5", "%6", "%7", \ "%8", "%9", "%10", "%11", "%12", "%13", "%14", "%15", \ "%16", "%17", "%18", "%19", "%20", "%21", "%22", "%23", \ "%24", "%25", "%26", "%27", "%28", "%29", "%30", "%31", "%rap" \ }; #define ADDITIONAL_REGISTER_NAMES \ { \ { "%0", 0 + GP_REG_FIRST }, \ { "%1", 1 + GP_REG_FIRST }, \ { "%2", 2 + GP_REG_FIRST }, \ { "%3", 3 + GP_REG_FIRST }, \ { "%4", 4 + GP_REG_FIRST }, \ { "%5", 5 + GP_REG_FIRST }, \ { "%6", 6 + GP_REG_FIRST }, \ { "%7", 7 + GP_REG_FIRST }, \ { "%8", 8 + GP_REG_FIRST }, \ { "%9", 9 + GP_REG_FIRST }, \ { "%10", 10 + GP_REG_FIRST }, \ { "%11", 11 + GP_REG_FIRST }, \ { "%12", 12 + GP_REG_FIRST }, \ { "%13", 13 + GP_REG_FIRST }, \ { "%14", 14 + GP_REG_FIRST }, \ { "%15", 15 + GP_REG_FIRST }, \ { "%16", 16 + GP_REG_FIRST }, \ { "%17", 17 + GP_REG_FIRST }, \ { "%18", 18 + GP_REG_FIRST }, \ { "%19", 19 + GP_REG_FIRST }, \ { "%20", 20 + GP_REG_FIRST }, \ { "%21", 21 + GP_REG_FIRST }, \ { "%22", 22 + GP_REG_FIRST }, \ { "%23", 23 + GP_REG_FIRST }, \ { "%24", 24 + GP_REG_FIRST }, \ { "%25", 25 + GP_REG_FIRST }, \ { "%26", 26 + GP_REG_FIRST }, \ { "%27", 27 + GP_REG_FIRST }, \ { "%28", 28 + GP_REG_FIRST }, \ { "%29", 29 + GP_REG_FIRST }, \ { "%30", 27 + GP_REG_FIRST }, \ { "%31", 31 + GP_REG_FIRST }, \ { "%rap", 32 + GP_REG_FIRST }, \ } /* Check if the current insn needs a nop in front of it because of load delays, and also update the delay slot statistics. */ #define FINAL_PRESCAN_INSN(INSN, OPVEC, NOPERANDS) \ final_prescan_insn (INSN, OPVEC, NOPERANDS) /* See iq2000.c for the IQ2000 specific codes. */ #define PRINT_OPERAND(FILE, X, CODE) print_operand (FILE, X, CODE) #define PRINT_OPERAND_PUNCT_VALID_P(CODE) iq2000_print_operand_punct[CODE] #define PRINT_OPERAND_ADDRESS(FILE, ADDR) print_operand_address (FILE, ADDR) #define DBR_OUTPUT_SEQEND(STREAM) \ do \ { \ fputs ("\n", STREAM); \ } \ while (0) #define LOCAL_LABEL_PREFIX "$" #define USER_LABEL_PREFIX "" /* Output of dispatch tables. */ #define ASM_OUTPUT_ADDR_DIFF_ELT(STREAM, BODY, VALUE, REL) \ do \ { \ fprintf (STREAM, "\t%s\t%sL%d\n", \ Pmode == DImode ? ".dword" : ".word", \ LOCAL_LABEL_PREFIX, VALUE); \ } \ while (0) #define ASM_OUTPUT_ADDR_VEC_ELT(STREAM, VALUE) \ fprintf (STREAM, "\t%s\t%sL%d\n", \ Pmode == DImode ? ".dword" : ".word", \ LOCAL_LABEL_PREFIX, \ VALUE) /* Assembler Commands for Alignment. */ #undef ASM_OUTPUT_SKIP #define ASM_OUTPUT_SKIP(STREAM,SIZE) \ fprintf (STREAM, "\t.space\t%u\n", (SIZE)) #define ASM_OUTPUT_ALIGN(STREAM,LOG) \ if ((LOG) != 0) \ fprintf (STREAM, "\t.balign %d\n", 1<<(LOG)) /* Macros Affecting all Debug Formats. */ #define DEBUGGER_AUTO_OFFSET(X) \ iq2000_debugger_offset (X, (HOST_WIDE_INT) 0) #define DEBUGGER_ARG_OFFSET(OFFSET, X) \ iq2000_debugger_offset (X, (HOST_WIDE_INT) OFFSET) #define PREFERRED_DEBUGGING_TYPE DWARF2_DEBUG #define DWARF2_DEBUGGING_INFO 1 /* Miscellaneous Parameters. */ #define CASE_VECTOR_MODE SImode #define WORD_REGISTER_OPERATIONS #define LOAD_EXTEND_OP(MODE) ZERO_EXTEND #define MOVE_MAX 4 #define MAX_MOVE_MAX 8 #define SHIFT_COUNT_TRUNCATED 1 #define TRULY_NOOP_TRUNCATION(OUTPREC, INPREC) 1 #define STORE_FLAG_VALUE 1 #define Pmode SImode #define FUNCTION_MODE SImode /* Standard GCC variables that we reference. */ extern char call_used_regs[]; /* IQ2000 external variables defined in iq2000.c. */ /* Comparison type. */ enum cmp_type { CMP_SI, /* Compare four byte integers. */ CMP_DI, /* Compare eight byte integers. */ CMP_SF, /* Compare single precision floats. */ CMP_DF, /* Compare double precision floats. */ CMP_MAX /* Max comparison type. */ }; /* Types of delay slot. */ enum delay_type { DELAY_NONE, /* No delay slot. */ DELAY_LOAD, /* Load from memory delay. */ DELAY_FCMP /* Delay after doing c..{d,s}. */ }; /* Which processor to schedule for. */ enum processor_type { PROCESSOR_DEFAULT, PROCESSOR_IQ2000, PROCESSOR_IQ10 }; /* Recast the cpu class to be the cpu attribute. */ #define iq2000_cpu_attr ((enum attr_cpu) iq2000_tune) #define BITMASK_UPPER16 ((unsigned long) 0xffff << 16) /* 0xffff0000 */ #define BITMASK_LOWER16 ((unsigned long) 0xffff) /* 0x0000ffff */ #define GENERATE_BRANCHLIKELY (ISA_HAS_BRANCHLIKELY) /* Macros to decide whether certain features are available or not, depending on the instruction set architecture level. */ #define BRANCH_LIKELY_P() GENERATE_BRANCHLIKELY /* ISA has branch likely instructions. */ #define ISA_HAS_BRANCHLIKELY (iq2000_isa == 1) #undef ASM_SPEC /* The mapping from gcc register number to DWARF 2 CFA column number. */ #define DWARF_FRAME_REGNUM(REG) (REG) /* The DWARF 2 CFA column which tracks the return address. */ #define DWARF_FRAME_RETURN_COLUMN (GP_REG_FIRST + 31) /* Describe how we implement __builtin_eh_return. */ #define EH_RETURN_DATA_REGNO(N) ((N) < 4 ? (N) + GP_ARG_FIRST : INVALID_REGNUM) /* The EH_RETURN_STACKADJ_RTX macro returns RTL which describes the location used to store the amount to adjust the stack. This is usually a register that is available from end of the function's body to the end of the epilogue. Thus, this cannot be a register used as a temporary by the epilogue. This must be an integer register. */ #define EH_RETURN_STACKADJ_REGNO 3 #define EH_RETURN_STACKADJ_RTX gen_rtx_REG (Pmode, EH_RETURN_STACKADJ_REGNO) /* The EH_RETURN_HANDLER_RTX macro returns RTL which describes the location used to store the address the processor should jump to catch exception. This is usually a registers that is available from end of the function's body to the end of the epilogue. Thus, this cannot be a register used as a temporary by the epilogue. This must be an address register. */ #define EH_RETURN_HANDLER_REGNO 26 #define EH_RETURN_HANDLER_RTX \ gen_rtx_REG (Pmode, EH_RETURN_HANDLER_REGNO) /* Offsets recorded in opcodes are a multiple of this alignment factor. */ #define DWARF_CIE_DATA_ALIGNMENT 4 /* For IQ2000, width of a floating point register. */ #define UNITS_PER_FPREG 4 /* Force right-alignment for small varargs in 32 bit little_endian mode */ #define PAD_VARARGS_DOWN !BYTES_BIG_ENDIAN /* Internal macros to classify a register number as to whether it's a general purpose register, a floating point register, a multiply/divide register, or a status register. */ #define GP_REG_FIRST 0 #define GP_REG_LAST 31 #define GP_REG_NUM (GP_REG_LAST - GP_REG_FIRST + 1) #define RAP_REG_NUM 32 #define AT_REGNUM (GP_REG_FIRST + 1) #define GP_REG_P(REGNO) \ ((unsigned int) ((int) (REGNO) - GP_REG_FIRST) < GP_REG_NUM) /* IQ2000 registers used in prologue/epilogue code when the stack frame is larger than 32K bytes. These registers must come from the scratch register set, and not used for passing and returning arguments and any other information used in the calling sequence. */ #define IQ2000_TEMP1_REGNUM (GP_REG_FIRST + 12) #define IQ2000_TEMP2_REGNUM (GP_REG_FIRST + 13) /* This macro is used later on in the file. */ #define GR_REG_CLASS_P(CLASS) \ ((CLASS) == GR_REGS) #define SMALL_INT(X) ((unsigned HOST_WIDE_INT) (INTVAL (X) + 0x8000) < 0x10000) #define SMALL_INT_UNSIGNED(X) ((unsigned HOST_WIDE_INT) (INTVAL (X)) < 0x10000) /* Certain machines have the property that some registers cannot be copied to some other registers without using memory. Define this macro on those machines to be a C expression that is nonzero if objects of mode MODE in registers of CLASS1 can only be copied to registers of class CLASS2 by storing a register of CLASS1 into memory and loading that memory location into a register of CLASS2. Do not define this macro if its value would always be zero. */ /* Return the maximum number of consecutive registers needed to represent mode MODE in a register of class CLASS. */ #define CLASS_UNITS(mode, size) \ ((GET_MODE_SIZE (mode) + (size) - 1) / (size)) /* If defined, gives a class of registers that cannot be used as the operand of a SUBREG that changes the mode of the object illegally. */ #define CLASS_CANNOT_CHANGE_MODE 0 /* Defines illegal mode changes for CLASS_CANNOT_CHANGE_MODE. */ #define CLASS_CANNOT_CHANGE_MODE_P(FROM,TO) \ (GET_MODE_SIZE (FROM) != GET_MODE_SIZE (TO)) /* Make sure 4 words are always allocated on the stack. */ #ifndef STACK_ARGS_ADJUST #define STACK_ARGS_ADJUST(SIZE) \ { \ if (SIZE.constant < 4 * UNITS_PER_WORD) \ SIZE.constant = 4 * UNITS_PER_WORD; \ } #endif /* Symbolic macros for the registers used to return integer and floating point values. */ #define GP_RETURN (GP_REG_FIRST + 2) /* Symbolic macros for the first/last argument registers. */ #define GP_ARG_FIRST (GP_REG_FIRST + 4) #define GP_ARG_LAST (GP_REG_FIRST + 11) #define MAX_ARGS_IN_REGISTERS 8 /* Tell prologue and epilogue if register REGNO should be saved / restored. */ #define MUST_SAVE_REGISTER(regno) \ ((regs_ever_live[regno] && !call_used_regs[regno]) \ || (regno == HARD_FRAME_POINTER_REGNUM && frame_pointer_needed) \ || (regno == (GP_REG_FIRST + 31) && regs_ever_live[GP_REG_FIRST + 31])) /* ALIGN FRAMES on double word boundaries */ #ifndef IQ2000_STACK_ALIGN #define IQ2000_STACK_ALIGN(LOC) (((LOC) + 7) & ~7) #endif /* These assume that REGNO is a hard or pseudo reg number. They give nonzero only if REGNO is a hard reg of the suitable class or a pseudo reg currently allocated to a suitable hard reg. These definitions are NOT overridden anywhere. */ #define BASE_REG_P(regno, mode) \ (GP_REG_P (regno)) #define GP_REG_OR_PSEUDO_STRICT_P(regno, mode) \ BASE_REG_P((regno < FIRST_PSEUDO_REGISTER) ? regno : reg_renumber[regno], \ (mode)) #define GP_REG_OR_PSEUDO_NONSTRICT_P(regno, mode) \ (((regno) >= FIRST_PSEUDO_REGISTER) || (BASE_REG_P ((regno), (mode)))) #define REGNO_MODE_OK_FOR_BASE_P(regno, mode) \ GP_REG_OR_PSEUDO_STRICT_P ((regno), (mode)) /* The macros REG_OK_FOR..._P assume that the arg is a REG rtx and check its validity for a certain class. We have two alternate definitions for each of them. The usual definition accepts all pseudo regs; the other rejects them all. The symbol REG_OK_STRICT causes the latter definition to be used. Most source files want to accept pseudo regs in the hope that they will get allocated to the class that the insn wants them to be in. Some source files that are used after register allocation need to be strict. */ #ifndef REG_OK_STRICT #define REG_MODE_OK_FOR_BASE_P(X, MODE) \ iq2000_reg_mode_ok_for_base_p (X, MODE, 0) #else #define REG_MODE_OK_FOR_BASE_P(X, MODE) \ iq2000_reg_mode_ok_for_base_p (X, MODE, 1) #endif #if 1 #define GO_PRINTF(x) fprintf (stderr, (x)) #define GO_PRINTF2(x,y) fprintf (stderr, (x), (y)) #define GO_DEBUG_RTX(x) debug_rtx (x) #else #define GO_PRINTF(x) #define GO_PRINTF2(x,y) #define GO_DEBUG_RTX(x) #endif /* If defined, modifies the length assigned to instruction INSN as a function of the context in which it is used. LENGTH is an lvalue that contains the initially computed length of the insn and should be updated with the correct length of the insn. */ #define ADJUST_INSN_LENGTH(INSN, LENGTH) \ ((LENGTH) = iq2000_adjust_insn_length ((INSN), (LENGTH))) /* How to tell the debugger about changes of source files. */ #ifndef SET_FILE_NUMBER #define SET_FILE_NUMBER() ++ num_source_filenames #endif /* This is how to output a note the debugger telling it the line number to which the following sequence of instructions corresponds. */ #ifndef LABEL_AFTER_LOC #define LABEL_AFTER_LOC(STREAM) #endif /* Default to -G 8 */ #ifndef IQ2000_DEFAULT_GVALUE #define IQ2000_DEFAULT_GVALUE 8 #endif #define SDATA_SECTION_ASM_OP "\t.sdata" /* Small data. */ /* List of all IQ2000 punctuation characters used by print_operand. */ extern char iq2000_print_operand_punct[256]; /* The target cpu for optimization and scheduling. */ extern enum processor_type iq2000_tune; /* Which instruction set architecture to use. */ extern int iq2000_isa; /* Cached operands, and operator to compare for use in set/branch/trap on condition codes. */ extern rtx branch_cmp[2]; /* What type of branch to use. */ extern enum cmp_type branch_type; enum iq2000_builtins { IQ2000_BUILTIN_ADO16, IQ2000_BUILTIN_CFC0, IQ2000_BUILTIN_CFC1, IQ2000_BUILTIN_CFC2, IQ2000_BUILTIN_CFC3, IQ2000_BUILTIN_CHKHDR, IQ2000_BUILTIN_CTC0, IQ2000_BUILTIN_CTC1, IQ2000_BUILTIN_CTC2, IQ2000_BUILTIN_CTC3, IQ2000_BUILTIN_LU, IQ2000_BUILTIN_LUC32L, IQ2000_BUILTIN_LUC64, IQ2000_BUILTIN_LUC64L, IQ2000_BUILTIN_LUK, IQ2000_BUILTIN_LULCK, IQ2000_BUILTIN_LUM32, IQ2000_BUILTIN_LUM32L, IQ2000_BUILTIN_LUM64, IQ2000_BUILTIN_LUM64L, IQ2000_BUILTIN_LUR, IQ2000_BUILTIN_LURL, IQ2000_BUILTIN_MFC0, IQ2000_BUILTIN_MFC1, IQ2000_BUILTIN_MFC2, IQ2000_BUILTIN_MFC3, IQ2000_BUILTIN_MRGB, IQ2000_BUILTIN_MTC0, IQ2000_BUILTIN_MTC1, IQ2000_BUILTIN_MTC2, IQ2000_BUILTIN_MTC3, IQ2000_BUILTIN_PKRL, IQ2000_BUILTIN_RAM, IQ2000_BUILTIN_RB, IQ2000_BUILTIN_RX, IQ2000_BUILTIN_SRRD, IQ2000_BUILTIN_SRRDL, IQ2000_BUILTIN_SRULC, IQ2000_BUILTIN_SRULCK, IQ2000_BUILTIN_SRWR, IQ2000_BUILTIN_SRWRU, IQ2000_BUILTIN_TRAPQF, IQ2000_BUILTIN_TRAPQFL, IQ2000_BUILTIN_TRAPQN, IQ2000_BUILTIN_TRAPQNE, IQ2000_BUILTIN_TRAPRE, IQ2000_BUILTIN_TRAPREL, IQ2000_BUILTIN_WB, IQ2000_BUILTIN_WBR, IQ2000_BUILTIN_WBU, IQ2000_BUILTIN_WX, IQ2000_BUILTIN_SYSCALL };