/* Definitions of target machine for GNU compiler. NEC V850 series Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc. Contributed by Jeff Law (law@cygnus.com). This file is part of GCC. GCC is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. GCC is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GCC; see the file COPYING. If not, write to the Free Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ #ifndef GCC_V850_H #define GCC_V850_H /* These are defined in svr4.h but we want to override them. */ #undef LIB_SPEC #undef ENDFILE_SPEC #undef LINK_SPEC #undef STARTFILE_SPEC #undef ASM_SPEC #define TARGET_CPU_generic 1 #define TARGET_CPU_v850e 2 #define TARGET_CPU_v850e1 3 #ifndef TARGET_CPU_DEFAULT #define TARGET_CPU_DEFAULT TARGET_CPU_generic #endif #define MASK_DEFAULT MASK_V850 #define SUBTARGET_ASM_SPEC "%{!mv*:-mv850}" #define SUBTARGET_CPP_SPEC "%{!mv*:-D__v850__}" #define TARGET_VERSION fprintf (stderr, " (NEC V850)"); /* Choose which processor will be the default. We must pass a -mv850xx option to the assembler if no explicit -mv* option is given, because the assembler's processor default may not be correct. */ #if TARGET_CPU_DEFAULT == TARGET_CPU_v850e #undef MASK_DEFAULT #define MASK_DEFAULT MASK_V850E #undef SUBTARGET_ASM_SPEC #define SUBTARGET_ASM_SPEC "%{!mv*:-mv850e}" #undef SUBTARGET_CPP_SPEC #define SUBTARGET_CPP_SPEC "%{!mv*:-D__v850e__}" #undef TARGET_VERSION #define TARGET_VERSION fprintf (stderr, " (NEC V850E)"); #endif #if TARGET_CPU_DEFAULT == TARGET_CPU_v850e1 #undef MASK_DEFAULT #define MASK_DEFAULT MASK_V850E /* No practical difference. */ #undef SUBTARGET_ASM_SPEC #define SUBTARGET_ASM_SPEC "%{!mv*:-mv850e1}" #undef SUBTARGET_CPP_SPEC #define SUBTARGET_CPP_SPEC "%{!mv*:-D__v850e1__} %{mv850e1:-D__v850e1__}" #undef TARGET_VERSION #define TARGET_VERSION fprintf (stderr, " (NEC V850E1)"); #endif #define ASM_SPEC "%{mv*:-mv%*}" #define CPP_SPEC "%{mv850e:-D__v850e__} %{mv850:-D__v850__} %(subtarget_cpp_spec)" #define EXTRA_SPECS \ { "subtarget_asm_spec", SUBTARGET_ASM_SPEC }, \ { "subtarget_cpp_spec", SUBTARGET_CPP_SPEC } /* Names to predefine in the preprocessor for this target machine. */ #define TARGET_CPU_CPP_BUILTINS() do { \ builtin_define( "__v851__" ); \ builtin_define( "__v850" ); \ builtin_assert( "machine=v850" ); \ builtin_assert( "cpu=v850" ); \ if (TARGET_EP) \ builtin_define ("__EP__"); \ } while(0) #define MASK_CPU (MASK_V850 | MASK_V850E) /* Information about the various small memory areas. */ struct small_memory_info { const char *name; long max; long physical_max; }; enum small_memory_type { /* tiny data area, using EP as base register */ SMALL_MEMORY_TDA = 0, /* small data area using dp as base register */ SMALL_MEMORY_SDA, /* zero data area using r0 as base register */ SMALL_MEMORY_ZDA, SMALL_MEMORY_max }; extern struct small_memory_info small_memory[(int)SMALL_MEMORY_max]; /* Show we can debug even without a frame pointer. */ #define CAN_DEBUG_WITHOUT_FP /* Some machines may desire to change what optimizations are performed for various optimization levels. This macro, if defined, is executed once just after the optimization level is determined and before the remainder of the command options have been parsed. Values set in this macro are used as the default values for the other command line options. LEVEL is the optimization level specified; 2 if `-O2' is specified, 1 if `-O' is specified, and 0 if neither is specified. SIZE is nonzero if `-Os' is specified, 0 otherwise. You should not use this macro to change options that are not machine-specific. These should uniformly selected by the same optimization level on all supported machines. Use this macro to enable machine-specific optimizations. *Do not examine `write_symbols' in this macro!* The debugging options are not supposed to alter the generated code. */ #define OPTIMIZATION_OPTIONS(LEVEL,SIZE) \ { \ target_flags |= MASK_STRICT_ALIGN; \ if (LEVEL) \ /* Note - we no longer enable MASK_EP when optimizing. This is \ because of a hardware bug which stops the SLD and SST instructions\ from correctly detecting some hazards. If the user is sure that \ their hardware is fixed or that their program will not encounter \ the conditions that trigger the bug then they can enable -mep by \ hand. */ \ target_flags |= MASK_PROLOG_FUNCTION; \ } /* Target machine storage layout */ /* Define this if most significant bit is lowest numbered in instructions that operate on numbered bit-fields. This is not true on the NEC V850. */ #define BITS_BIG_ENDIAN 0 /* Define this if most significant byte of a word is the lowest numbered. */ /* This is not true on the NEC V850. */ #define BYTES_BIG_ENDIAN 0 /* Define this if most significant word of a multiword number is lowest numbered. This is not true on the NEC V850. */ #define WORDS_BIG_ENDIAN 0 /* Width of a word, in units (bytes). */ #define UNITS_PER_WORD 4 /* Define this macro if it is advisable to hold scalars in registers in a wider mode than that declared by the program. In such cases, the value is constrained to be within the bounds of the declared type, but kept valid in the wider mode. The signedness of the extension may differ from that of the type. Some simple experiments have shown that leaving UNSIGNEDP alone generates the best overall code. */ #define PROMOTE_MODE(MODE,UNSIGNEDP,TYPE) \ if (GET_MODE_CLASS (MODE) == MODE_INT \ && GET_MODE_SIZE (MODE) < 4) \ { (MODE) = SImode; } /* Allocation boundary (in *bits*) for storing arguments in argument list. */ #define PARM_BOUNDARY 32 /* The stack goes in 32 bit lumps. */ #define STACK_BOUNDARY 32 /* Allocation boundary (in *bits*) for the code of a function. 16 is the minimum boundary; 32 would give better performance. */ #define FUNCTION_BOUNDARY 16 /* No data type wants to be aligned rounder than this. */ #define BIGGEST_ALIGNMENT 32 /* Alignment of field after `int : 0' in a structure. */ #define EMPTY_FIELD_BOUNDARY 32 /* No structure field wants to be aligned rounder than this. */ #define BIGGEST_FIELD_ALIGNMENT 32 /* Define this if move instructions will actually fail to work when given unaligned data. */ #define STRICT_ALIGNMENT TARGET_STRICT_ALIGN /* Define this as 1 if `char' should by default be signed; else as 0. On the NEC V850, loads do sign extension, so make this default. */ #define DEFAULT_SIGNED_CHAR 1 /* Standard register usage. */ /* Number of actual hardware registers. The hardware registers are assigned numbers for the compiler from 0 to just below FIRST_PSEUDO_REGISTER. All registers that the compiler knows about must be given numbers, even those that are not normally considered general registers. */ #define FIRST_PSEUDO_REGISTER 34 /* 1 for registers that have pervasive standard uses and are not available for the register allocator. */ #define FIXED_REGISTERS \ { 1, 1, 0, 1, 1, 0, 0, 0, \ 0, 0, 0, 0, 0, 0, 0, 0, \ 0, 0, 0, 0, 0, 0, 0, 0, \ 0, 0, 0, 0, 0, 0, 1, 0, \ 1, 1} /* 1 for registers not available across function calls. These must include the FIXED_REGISTERS and also any registers that can be used without being saved. The latter must include the registers where values are returned and the register where structure-value addresses are passed. Aside from that, you can include as many other registers as you like. */ #define CALL_USED_REGISTERS \ { 1, 1, 0, 1, 1, 1, 1, 1, \ 1, 1, 1, 1, 1, 1, 1, 1, \ 1, 1, 1, 1, 0, 0, 0, 0, \ 0, 0, 0, 0, 0, 0, 1, 1, \ 1, 1} /* List the order in which to allocate registers. Each register must be listed once, even those in FIXED_REGISTERS. On the 850, we make the return registers first, then all of the volatile registers, then the saved registers in reverse order to better save the registers with an out of line function, and finally the fixed registers. */ #define REG_ALLOC_ORDER \ { \ 10, 11, /* return registers */ \ 12, 13, 14, 15, 16, 17, 18, 19, /* scratch registers */ \ 6, 7, 8, 9, 31, /* argument registers */ \ 29, 28, 27, 26, 25, 24, 23, 22, /* saved registers */ \ 21, 20, 2, \ 0, 1, 3, 4, 5, 30, 32, 33 /* fixed registers */ \ } /* If TARGET_APP_REGS is not defined then add r2 and r5 to the pool of fixed registers. See PR 14505. */ #define CONDITIONAL_REGISTER_USAGE \ { \ if (!TARGET_APP_REGS) \ { \ fixed_regs[2] = 1; call_used_regs[2] = 1; \ fixed_regs[5] = 1; call_used_regs[5] = 1; \ } \ } /* Return number of consecutive hard regs needed starting at reg REGNO to hold something of mode MODE. This is ordinarily the length in words of a value of mode MODE but can be less for certain modes in special long registers. */ #define HARD_REGNO_NREGS(REGNO, MODE) \ ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD) /* Value is 1 if hard register REGNO can hold a value of machine-mode MODE. */ #define HARD_REGNO_MODE_OK(REGNO, MODE) \ ((((REGNO) & 1) == 0) || (GET_MODE_SIZE (MODE) <= 4)) /* Value is 1 if it is a good idea to tie two pseudo registers when one has mode MODE1 and one has mode MODE2. If HARD_REGNO_MODE_OK could produce different values for MODE1 and MODE2, for any hard reg, then this must be 0 for correct output. */ #define MODES_TIEABLE_P(MODE1, MODE2) \ (MODE1 == MODE2 || (GET_MODE_SIZE (MODE1) <= 4 && GET_MODE_SIZE (MODE2) <= 4)) /* Define the classes of registers for register constraints in the machine description. Also define ranges of constants. One of the classes must always be named ALL_REGS and include all hard regs. If there is more than one class, another class must be named NO_REGS and contain no registers. The name GENERAL_REGS must be the name of a class (or an alias for another name such as ALL_REGS). This is the class of registers that is allowed by "g" or "r" in a register constraint. Also, registers outside this class are allocated only when instructions express preferences for them. The classes must be numbered in nondecreasing order; that is, a larger-numbered class must never be contained completely in a smaller-numbered class. For any two classes, it is very desirable that there be another class that represents their union. */ enum reg_class { NO_REGS, GENERAL_REGS, ALL_REGS, LIM_REG_CLASSES }; #define N_REG_CLASSES (int) LIM_REG_CLASSES /* Give names of register classes as strings for dump file. */ #define REG_CLASS_NAMES \ { "NO_REGS", "GENERAL_REGS", "ALL_REGS", "LIM_REGS" } /* Define which registers fit in which classes. This is an initializer for a vector of HARD_REG_SET of length N_REG_CLASSES. */ #define REG_CLASS_CONTENTS \ { \ { 0x00000000 }, /* NO_REGS */ \ { 0xffffffff }, /* GENERAL_REGS */ \ { 0xffffffff }, /* ALL_REGS */ \ } /* The same information, inverted: Return the class number of the smallest class containing reg number REGNO. This could be a conditional expression or could index an array. */ #define REGNO_REG_CLASS(REGNO) GENERAL_REGS /* The class value for index registers, and the one for base regs. */ #define INDEX_REG_CLASS NO_REGS #define BASE_REG_CLASS GENERAL_REGS /* Get reg_class from a letter such as appears in the machine description. */ #define REG_CLASS_FROM_LETTER(C) (NO_REGS) /* Macros to check register numbers against specific register classes. */ /* These assume that REGNO is a hard or pseudo reg number. They give nonzero only if REGNO is a hard reg of the suitable class or a pseudo reg currently allocated to a suitable hard reg. Since they use reg_renumber, they are safe only once reg_renumber has been allocated, which happens in local-alloc.c. */ #define REGNO_OK_FOR_BASE_P(regno) \ ((regno) < FIRST_PSEUDO_REGISTER || reg_renumber[regno] >= 0) #define REGNO_OK_FOR_INDEX_P(regno) 0 /* Given an rtx X being reloaded into a reg required to be in class CLASS, return the class of reg to actually use. In general this is just CLASS; but on some machines in some cases it is preferable to use a more restrictive class. */ #define PREFERRED_RELOAD_CLASS(X,CLASS) (CLASS) /* Return the maximum number of consecutive registers needed to represent mode MODE in a register of class CLASS. */ #define CLASS_MAX_NREGS(CLASS, MODE) \ ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD) /* The letters I, J, K, L, M, N, O, P in a register constraint string can be used to stand for particular ranges of immediate operands. This macro defines what the ranges are. C is the letter, and VALUE is a constant value. Return 1 if VALUE is in the range specified by C. */ #define INT_7_BITS(VALUE) ((unsigned) (VALUE) + 0x40 < 0x80) #define INT_8_BITS(VALUE) ((unsigned) (VALUE) + 0x80 < 0x100) /* zero */ #define CONST_OK_FOR_I(VALUE) ((VALUE) == 0) /* 5 bit signed immediate */ #define CONST_OK_FOR_J(VALUE) ((unsigned) (VALUE) + 0x10 < 0x20) /* 16 bit signed immediate */ #define CONST_OK_FOR_K(VALUE) ((unsigned) (VALUE) + 0x8000 < 0x10000) /* valid constant for movhi instruction. */ #define CONST_OK_FOR_L(VALUE) \ (((unsigned) ((int) (VALUE) >> 16) + 0x8000 < 0x10000) \ && CONST_OK_FOR_I ((VALUE & 0xffff))) /* 16 bit unsigned immediate */ #define CONST_OK_FOR_M(VALUE) ((unsigned)(VALUE) < 0x10000) /* 5 bit unsigned immediate in shift instructions */ #define CONST_OK_FOR_N(VALUE) ((unsigned) (VALUE) <= 31) /* 9 bit signed immediate for word multiply instruction. */ #define CONST_OK_FOR_O(VALUE) ((unsigned) (VALUE) + 0x100 < 0x200) #define CONST_OK_FOR_P(VALUE) 0 #define CONST_OK_FOR_LETTER_P(VALUE, C) \ ((C) == 'I' ? CONST_OK_FOR_I (VALUE) : \ (C) == 'J' ? CONST_OK_FOR_J (VALUE) : \ (C) == 'K' ? CONST_OK_FOR_K (VALUE) : \ (C) == 'L' ? CONST_OK_FOR_L (VALUE) : \ (C) == 'M' ? CONST_OK_FOR_M (VALUE) : \ (C) == 'N' ? CONST_OK_FOR_N (VALUE) : \ (C) == 'O' ? CONST_OK_FOR_O (VALUE) : \ (C) == 'P' ? CONST_OK_FOR_P (VALUE) : \ 0) /* Similar, but for floating constants, and defining letters G and H. Here VALUE is the CONST_DOUBLE rtx itself. `G' is a zero of some form. */ #define CONST_DOUBLE_OK_FOR_G(VALUE) \ ((GET_MODE_CLASS (GET_MODE (VALUE)) == MODE_FLOAT \ && (VALUE) == CONST0_RTX (GET_MODE (VALUE))) \ || (GET_MODE_CLASS (GET_MODE (VALUE)) == MODE_INT \ && CONST_DOUBLE_LOW (VALUE) == 0 \ && CONST_DOUBLE_HIGH (VALUE) == 0)) #define CONST_DOUBLE_OK_FOR_H(VALUE) 0 #define CONST_DOUBLE_OK_FOR_LETTER_P(VALUE, C) \ ((C) == 'G' ? CONST_DOUBLE_OK_FOR_G (VALUE) \ : (C) == 'H' ? CONST_DOUBLE_OK_FOR_H (VALUE) \ : 0) /* Stack layout; function entry, exit and calling. */ /* Define this if pushing a word on the stack makes the stack pointer a smaller address. */ #define STACK_GROWS_DOWNWARD /* Define this to nonzero if the nominal address of the stack frame is at the high-address end of the local variables; that is, each additional local variable allocated goes at a more negative offset in the frame. */ #define FRAME_GROWS_DOWNWARD 1 /* Offset within stack frame to start allocating local variables at. If FRAME_GROWS_DOWNWARD, this is the offset to the END of the first local allocated. Otherwise, it is the offset to the BEGINNING of the first local allocated. */ #define STARTING_FRAME_OFFSET 0 /* Offset of first parameter from the argument pointer register value. */ /* Is equal to the size of the saved fp + pc, even if an fp isn't saved since the value is used before we know. */ #define FIRST_PARM_OFFSET(FNDECL) 0 /* Specify the registers used for certain standard purposes. The values of these macros are register numbers. */ /* Register to use for pushing function arguments. */ #define STACK_POINTER_REGNUM 3 /* Base register for access to local variables of the function. */ #define FRAME_POINTER_REGNUM 32 /* Register containing return address from latest function call. */ #define LINK_POINTER_REGNUM 31 /* On some machines the offset between the frame pointer and starting offset of the automatic variables is not known until after register allocation has been done (for example, because the saved registers are between these two locations). On those machines, define `FRAME_POINTER_REGNUM' the number of a special, fixed register to be used internally until the offset is known, and define `HARD_FRAME_POINTER_REGNUM' to be actual the hard register number used for the frame pointer. You should define this macro only in the very rare circumstances when it is not possible to calculate the offset between the frame pointer and the automatic variables until after register allocation has been completed. When this macro is defined, you must also indicate in your definition of `ELIMINABLE_REGS' how to eliminate `FRAME_POINTER_REGNUM' into either `HARD_FRAME_POINTER_REGNUM' or `STACK_POINTER_REGNUM'. Do not define this macro if it would be the same as `FRAME_POINTER_REGNUM'. */ #undef HARD_FRAME_POINTER_REGNUM #define HARD_FRAME_POINTER_REGNUM 29 /* Base register for access to arguments of the function. */ #define ARG_POINTER_REGNUM 33 /* Register in which static-chain is passed to a function. */ #define STATIC_CHAIN_REGNUM 20 /* Value should be nonzero if functions must have frame pointers. Zero means the frame pointer need not be set up (and parms may be accessed via the stack pointer) in functions that seem suitable. This is computed in `reload', in reload1.c. */ #define FRAME_POINTER_REQUIRED 0 /* If defined, this macro specifies a table of register pairs used to eliminate unneeded registers that point into the stack frame. If it is not defined, the only elimination attempted by the compiler is to replace references to the frame pointer with references to the stack pointer. The definition of this macro is a list of structure initializations, each of which specifies an original and replacement register. On some machines, the position of the argument pointer is not known until the compilation is completed. In such a case, a separate hard register must be used for the argument pointer. This register can be eliminated by replacing it with either the frame pointer or the argument pointer, depending on whether or not the frame pointer has been eliminated. In this case, you might specify: #define ELIMINABLE_REGS \ {{ARG_POINTER_REGNUM, STACK_POINTER_REGNUM}, \ {ARG_POINTER_REGNUM, FRAME_POINTER_REGNUM}, \ {FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}} Note that the elimination of the argument pointer with the stack pointer is specified first since that is the preferred elimination. */ #define ELIMINABLE_REGS \ {{ FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM }, \ { FRAME_POINTER_REGNUM, HARD_FRAME_POINTER_REGNUM }, \ { ARG_POINTER_REGNUM, STACK_POINTER_REGNUM }, \ { ARG_POINTER_REGNUM, HARD_FRAME_POINTER_REGNUM }} \ /* A C expression that returns nonzero if the compiler is allowed to try to replace register number FROM-REG with register number TO-REG. This macro need only be defined if `ELIMINABLE_REGS' is defined, and will usually be the constant 1, since most of the cases preventing register elimination are things that the compiler already knows about. */ #define CAN_ELIMINATE(FROM, TO) \ ((TO) == STACK_POINTER_REGNUM ? ! frame_pointer_needed : 1) /* This macro is similar to `INITIAL_FRAME_POINTER_OFFSET'. It specifies the initial difference between the specified pair of registers. This macro must be defined if `ELIMINABLE_REGS' is defined. */ #define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET) \ { \ if ((FROM) == FRAME_POINTER_REGNUM) \ (OFFSET) = get_frame_size () + current_function_outgoing_args_size; \ else if ((FROM) == ARG_POINTER_REGNUM) \ (OFFSET) = compute_frame_size (get_frame_size (), (long *)0); \ else \ gcc_unreachable (); \ } /* Keep the stack pointer constant throughout the function. */ #define ACCUMULATE_OUTGOING_ARGS 1 /* Value is the number of bytes of arguments automatically popped when returning from a subroutine call. FUNDECL is the declaration node of the function (as a tree), FUNTYPE is the data type of the function (as a tree), or for a library call it is an identifier node for the subroutine name. SIZE is the number of bytes of arguments passed on the stack. */ #define RETURN_POPS_ARGS(FUNDECL,FUNTYPE,SIZE) 0 #define RETURN_ADDR_RTX(COUNT, FP) v850_return_addr (COUNT) /* Define a data type for recording info about an argument list during the scan of that argument list. This data type should hold all necessary information about the function itself and about the args processed so far, enough to enable macros such as FUNCTION_ARG to determine where the next arg should go. */ #define CUMULATIVE_ARGS struct cum_arg struct cum_arg { int nbytes; int anonymous_args; }; /* Define where to put the arguments to a function. Value is zero to push the argument on the stack, or a hard register in which to store the argument. MODE is the argument's machine mode. TYPE is the data type of the argument (as a tree). This is null for libcalls where that information may not be available. CUM is a variable of type CUMULATIVE_ARGS which gives info about the preceding args and about the function being called. NAMED is nonzero if this argument is a named parameter (otherwise it is an extra parameter matching an ellipsis). */ #define FUNCTION_ARG(CUM, MODE, TYPE, NAMED) \ function_arg (&CUM, MODE, TYPE, NAMED) /* Initialize a variable CUM of type CUMULATIVE_ARGS for a call to a function whose data type is FNTYPE. For a library call, FNTYPE is 0. */ #define INIT_CUMULATIVE_ARGS(CUM, FNTYPE, LIBNAME, INDIRECT, N_NAMED_ARGS) \ ((CUM).nbytes = 0, (CUM).anonymous_args = 0) /* Update the data in CUM to advance over an argument of mode MODE and data type TYPE. (TYPE is null for libcalls where that information may not be available.) */ #define FUNCTION_ARG_ADVANCE(CUM, MODE, TYPE, NAMED) \ ((CUM).nbytes += ((MODE) != BLKmode \ ? (GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) & -UNITS_PER_WORD \ : (int_size_in_bytes (TYPE) + UNITS_PER_WORD - 1) & -UNITS_PER_WORD)) /* When a parameter is passed in a register, stack space is still allocated for it. */ #define REG_PARM_STACK_SPACE(DECL) (!TARGET_GHS ? 16 : 0) /* Define this if the above stack space is to be considered part of the space allocated by the caller. */ #define OUTGOING_REG_PARM_STACK_SPACE /* 1 if N is a possible register number for function argument passing. */ #define FUNCTION_ARG_REGNO_P(N) (N >= 6 && N <= 9) /* Define how to find the value returned by a function. VALTYPE is the data type of the value (as a tree). If the precise function being called is known, FUNC is its FUNCTION_DECL; otherwise, FUNC is 0. */ #define FUNCTION_VALUE(VALTYPE, FUNC) \ gen_rtx_REG (TYPE_MODE (VALTYPE), 10) /* Define how to find the value returned by a library function assuming the value has mode MODE. */ #define LIBCALL_VALUE(MODE) \ gen_rtx_REG (MODE, 10) /* 1 if N is a possible register number for a function value. */ #define FUNCTION_VALUE_REGNO_P(N) ((N) == 10) #define DEFAULT_PCC_STRUCT_RETURN 0 /* EXIT_IGNORE_STACK should be nonzero if, when returning from a function, the stack pointer does not matter. The value is tested only in functions that have frame pointers. No definition is equivalent to always zero. */ #define EXIT_IGNORE_STACK 1 /* Define this macro as a C expression that is nonzero for registers used by the epilogue or the `return' pattern. */ #define EPILOGUE_USES(REGNO) \ (reload_completed && (REGNO) == LINK_POINTER_REGNUM) /* Output assembler code to FILE to increment profiler label # LABELNO for profiling a function entry. */ #define FUNCTION_PROFILER(FILE, LABELNO) ; #define TRAMPOLINE_TEMPLATE(FILE) \ do { \ fprintf (FILE, "\tjarl .+4,r12\n"); \ fprintf (FILE, "\tld.w 12[r12],r20\n"); \ fprintf (FILE, "\tld.w 16[r12],r12\n"); \ fprintf (FILE, "\tjmp [r12]\n"); \ fprintf (FILE, "\tnop\n"); \ fprintf (FILE, "\t.long 0\n"); \ fprintf (FILE, "\t.long 0\n"); \ } while (0) /* Length in units of the trampoline for entering a nested function. */ #define TRAMPOLINE_SIZE 24 /* Emit RTL insns to initialize the variable parts of a trampoline. FNADDR is an RTX for the address of the function's pure code. CXT is an RTX for the static chain value for the function. */ #define INITIALIZE_TRAMPOLINE(TRAMP, FNADDR, CXT) \ { \ emit_move_insn (gen_rtx_MEM (SImode, plus_constant ((TRAMP), 16)), \ (CXT)); \ emit_move_insn (gen_rtx_MEM (SImode, plus_constant ((TRAMP), 20)), \ (FNADDR)); \ } /* Addressing modes, and classification of registers for them. */ /* 1 if X is an rtx for a constant that is a valid address. */ /* ??? This seems too exclusive. May get better code by accepting more possibilities here, in particular, should accept ZDA_NAME SYMBOL_REFs. */ #define CONSTANT_ADDRESS_P(X) \ (GET_CODE (X) == CONST_INT \ && CONST_OK_FOR_K (INTVAL (X))) /* Maximum number of registers that can appear in a valid memory address. */ #define MAX_REGS_PER_ADDRESS 1 /* The macros REG_OK_FOR..._P assume that the arg is a REG rtx and check its validity for a certain class. We have two alternate definitions for each of them. The usual definition accepts all pseudo regs; the other rejects them unless they have been allocated suitable hard regs. The symbol REG_OK_STRICT causes the latter definition to be used. Most source files want to accept pseudo regs in the hope that they will get allocated to the class that the insn wants them to be in. Source files for reload pass need to be strict. After reload, it makes no difference, since pseudo regs have been eliminated by then. */ #ifndef REG_OK_STRICT /* Nonzero if X is a hard reg that can be used as an index or if it is a pseudo reg. */ #define REG_OK_FOR_INDEX_P(X) 0 /* Nonzero if X is a hard reg that can be used as a base reg or if it is a pseudo reg. */ #define REG_OK_FOR_BASE_P(X) 1 #define REG_OK_FOR_INDEX_P_STRICT(X) 0 #define REG_OK_FOR_BASE_P_STRICT(X) REGNO_OK_FOR_BASE_P (REGNO (X)) #define STRICT 0 #else /* Nonzero if X is a hard reg that can be used as an index. */ #define REG_OK_FOR_INDEX_P(X) 0 /* Nonzero if X is a hard reg that can be used as a base reg. */ #define REG_OK_FOR_BASE_P(X) REGNO_OK_FOR_BASE_P (REGNO (X)) #define STRICT 1 #endif /* A C expression that defines the optional machine-dependent constraint letters that can be used to segregate specific types of operands, usually memory references, for the target machine. Normally this macro will not be defined. If it is required for a particular target machine, it should return 1 if VALUE corresponds to the operand type represented by the constraint letter C. If C is not defined as an extra constraint, the value returned should be 0 regardless of VALUE. For example, on the ROMP, load instructions cannot have their output in r0 if the memory reference contains a symbolic address. Constraint letter `Q' is defined as representing a memory address that does *not* contain a symbolic address. An alternative is specified with a `Q' constraint on the input and `r' on the output. The next alternative specifies `m' on the input and a register class that does not include r0 on the output. */ #define EXTRA_CONSTRAINT(OP, C) \ ((C) == 'Q' ? ep_memory_operand (OP, GET_MODE (OP), FALSE) \ : (C) == 'R' ? special_symbolref_operand (OP, VOIDmode) \ : (C) == 'S' ? (GET_CODE (OP) == SYMBOL_REF \ && !SYMBOL_REF_ZDA_P (OP)) \ : (C) == 'T' ? ep_memory_operand (OP, GET_MODE (OP), TRUE) \ : (C) == 'U' ? ((GET_CODE (OP) == SYMBOL_REF \ && SYMBOL_REF_ZDA_P (OP)) \ || (GET_CODE (OP) == CONST \ && GET_CODE (XEXP (OP, 0)) == PLUS \ && GET_CODE (XEXP (XEXP (OP, 0), 0)) == SYMBOL_REF \ && SYMBOL_REF_ZDA_P (XEXP (XEXP (OP, 0), 0)))) \ : 0) /* GO_IF_LEGITIMATE_ADDRESS recognizes an RTL expression that is a valid memory address for an instruction. The MODE argument is the machine mode for the MEM expression that wants to use this address. The other macros defined here are used only in GO_IF_LEGITIMATE_ADDRESS, except for CONSTANT_ADDRESS_P which is actually machine-independent. */ /* Accept either REG or SUBREG where a register is valid. */ #define RTX_OK_FOR_BASE_P(X) \ ((REG_P (X) && REG_OK_FOR_BASE_P (X)) \ || (GET_CODE (X) == SUBREG && REG_P (SUBREG_REG (X)) \ && REG_OK_FOR_BASE_P (SUBREG_REG (X)))) #define GO_IF_LEGITIMATE_ADDRESS(MODE, X, ADDR) \ do { \ if (RTX_OK_FOR_BASE_P (X)) \ goto ADDR; \ if (CONSTANT_ADDRESS_P (X) \ && (MODE == QImode || INTVAL (X) % 2 == 0) \ && (GET_MODE_SIZE (MODE) <= 4 || INTVAL (X) % 4 == 0)) \ goto ADDR; \ if (GET_CODE (X) == LO_SUM \ && REG_P (XEXP (X, 0)) \ && REG_OK_FOR_BASE_P (XEXP (X, 0)) \ && CONSTANT_P (XEXP (X, 1)) \ && (GET_CODE (XEXP (X, 1)) != CONST_INT \ || ((MODE == QImode || INTVAL (XEXP (X, 1)) % 2 == 0) \ && CONST_OK_FOR_K (INTVAL (XEXP (X, 1))))) \ && GET_MODE_SIZE (MODE) <= GET_MODE_SIZE (word_mode)) \ goto ADDR; \ if (special_symbolref_operand (X, MODE) \ && (GET_MODE_SIZE (MODE) <= GET_MODE_SIZE (word_mode))) \ goto ADDR; \ if (GET_CODE (X) == PLUS \ && RTX_OK_FOR_BASE_P (XEXP (X, 0)) \ && CONSTANT_ADDRESS_P (XEXP (X, 1)) \ && ((MODE == QImode || INTVAL (XEXP (X, 1)) % 2 == 0) \ && CONST_OK_FOR_K (INTVAL (XEXP (X, 1)) \ + (GET_MODE_NUNITS (MODE) * UNITS_PER_WORD)))) \ goto ADDR; \ } while (0) /* Go to LABEL if ADDR (a legitimate address expression) has an effect that depends on the machine mode it is used for. */ #define GO_IF_MODE_DEPENDENT_ADDRESS(ADDR,LABEL) {} /* Nonzero if the constant value X is a legitimate general operand. It is given that X satisfies CONSTANT_P or is a CONST_DOUBLE. */ #define LEGITIMATE_CONSTANT_P(X) \ (GET_CODE (X) == CONST_DOUBLE \ || !(GET_CODE (X) == CONST \ && GET_CODE (XEXP (X, 0)) == PLUS \ && GET_CODE (XEXP (XEXP (X, 0), 0)) == SYMBOL_REF \ && GET_CODE (XEXP (XEXP (X, 0), 1)) == CONST_INT \ && ! CONST_OK_FOR_K (INTVAL (XEXP (XEXP (X, 0), 1))))) /* Tell final.c how to eliminate redundant test instructions. */ /* Here we define machine-dependent flags and fields in cc_status (see `conditions.h'). No extra ones are needed for the VAX. */ /* Store in cc_status the expressions that the condition codes will describe after execution of an instruction whose pattern is EXP. Do not alter them if the instruction would not alter the cc's. */ #define CC_OVERFLOW_UNUSABLE 0x200 #define CC_NO_CARRY CC_NO_OVERFLOW #define NOTICE_UPDATE_CC(EXP, INSN) notice_update_cc(EXP, INSN) /* Nonzero if access to memory by bytes or half words is no faster than accessing full words. */ #define SLOW_BYTE_ACCESS 1 /* According expr.c, a value of around 6 should minimize code size, and for the V850 series, that's our primary concern. */ #define MOVE_RATIO 6 /* Indirect calls are expensive, never turn a direct call into an indirect call. */ #define NO_FUNCTION_CSE /* The four different data regions on the v850. */ typedef enum { DATA_AREA_NORMAL, DATA_AREA_SDA, DATA_AREA_TDA, DATA_AREA_ZDA } v850_data_area; #define TEXT_SECTION_ASM_OP "\t.section .text" #define DATA_SECTION_ASM_OP "\t.section .data" #define BSS_SECTION_ASM_OP "\t.section .bss" #define SDATA_SECTION_ASM_OP "\t.section .sdata,\"aw\"" #define SBSS_SECTION_ASM_OP "\t.section .sbss,\"aw\"" #define SCOMMON_ASM_OP "\t.scomm\t" #define ZCOMMON_ASM_OP "\t.zcomm\t" #define TCOMMON_ASM_OP "\t.tcomm\t" #define ASM_COMMENT_START "#" /* Output to assembler file text saying following lines may contain character constants, extra white space, comments, etc. */ #define ASM_APP_ON "#APP\n" /* Output to assembler file text saying following lines no longer contain unusual constructs. */ #define ASM_APP_OFF "#NO_APP\n" #undef USER_LABEL_PREFIX #define USER_LABEL_PREFIX "_" #define OUTPUT_ADDR_CONST_EXTRA(FILE, X, FAIL) \ if (! v850_output_addr_const_extra (FILE, X)) \ goto FAIL /* This says how to output the assembler to define a global uninitialized but not common symbol. */ #define ASM_OUTPUT_ALIGNED_BSS(FILE, DECL, NAME, SIZE, ALIGN) \ asm_output_aligned_bss ((FILE), (DECL), (NAME), (SIZE), (ALIGN)) #undef ASM_OUTPUT_ALIGNED_BSS #define ASM_OUTPUT_ALIGNED_BSS(FILE, DECL, NAME, SIZE, ALIGN) \ v850_output_aligned_bss (FILE, DECL, NAME, SIZE, ALIGN) /* This says how to output the assembler to define a global uninitialized, common symbol. */ #undef ASM_OUTPUT_ALIGNED_COMMON #undef ASM_OUTPUT_COMMON #define ASM_OUTPUT_ALIGNED_DECL_COMMON(FILE, DECL, NAME, SIZE, ALIGN) \ v850_output_common (FILE, DECL, NAME, SIZE, ALIGN) /* This says how to output the assembler to define a local uninitialized symbol. */ #undef ASM_OUTPUT_ALIGNED_LOCAL #undef ASM_OUTPUT_LOCAL #define ASM_OUTPUT_ALIGNED_DECL_LOCAL(FILE, DECL, NAME, SIZE, ALIGN) \ v850_output_local (FILE, DECL, NAME, SIZE, ALIGN) /* Globalizing directive for a label. */ #define GLOBAL_ASM_OP "\t.global " #define ASM_PN_FORMAT "%s___%lu" /* This is how we tell the assembler that two symbols have the same value. */ #define ASM_OUTPUT_DEF(FILE,NAME1,NAME2) \ do { assemble_name(FILE, NAME1); \ fputs(" = ", FILE); \ assemble_name(FILE, NAME2); \ fputc('\n', FILE); } while (0) /* How to refer to registers in assembler output. This sequence is indexed by compiler's hard-register-number (see above). */ #define REGISTER_NAMES \ { "r0", "r1", "r2", "sp", "gp", "r5", "r6" , "r7", \ "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15", \ "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23", \ "r24", "r25", "r26", "r27", "r28", "r29", "ep", "r31", \ ".fp", ".ap"} #define ADDITIONAL_REGISTER_NAMES \ { { "zero", 0 }, \ { "hp", 2 }, \ { "r3", 3 }, \ { "r4", 4 }, \ { "tp", 5 }, \ { "fp", 29 }, \ { "r30", 30 }, \ { "lp", 31} } /* Print an instruction operand X on file FILE. look in v850.c for details */ #define PRINT_OPERAND(FILE, X, CODE) print_operand (FILE, X, CODE) #define PRINT_OPERAND_PUNCT_VALID_P(CODE) \ ((CODE) == '.') /* Print a memory operand whose address is X, on file FILE. This uses a function in output-vax.c. */ #define PRINT_OPERAND_ADDRESS(FILE, ADDR) print_operand_address (FILE, ADDR) #define ASM_OUTPUT_REG_PUSH(FILE,REGNO) #define ASM_OUTPUT_REG_POP(FILE,REGNO) /* This is how to output an element of a case-vector that is absolute. */ #define ASM_OUTPUT_ADDR_VEC_ELT(FILE, VALUE) \ fprintf (FILE, "\t%s .L%d\n", \ (TARGET_BIG_SWITCH ? ".long" : ".short"), VALUE) /* This is how to output an element of a case-vector that is relative. */ /* Disable the shift, which is for the currently disabled "switch" opcode. Se casesi in v850.md. */ #define ASM_OUTPUT_ADDR_DIFF_ELT(FILE, BODY, VALUE, REL) \ fprintf (FILE, "\t%s %s.L%d-.L%d%s\n", \ (TARGET_BIG_SWITCH ? ".long" : ".short"), \ (0 && ! TARGET_BIG_SWITCH && TARGET_V850E ? "(" : ""), \ VALUE, REL, \ (0 && ! TARGET_BIG_SWITCH && TARGET_V850E ? ")>>1" : "")) #define ASM_OUTPUT_ALIGN(FILE, LOG) \ if ((LOG) != 0) \ fprintf (FILE, "\t.align %d\n", (LOG)) /* We don't have to worry about dbx compatibility for the v850. */ #define DEFAULT_GDB_EXTENSIONS 1 /* Use stabs debugging info by default. */ #undef PREFERRED_DEBUGGING_TYPE #define PREFERRED_DEBUGGING_TYPE DBX_DEBUG /* Specify the machine mode that this machine uses for the index in the tablejump instruction. */ #define CASE_VECTOR_MODE (TARGET_BIG_SWITCH ? SImode : HImode) /* Define as C expression which evaluates to nonzero if the tablejump instruction expects the table to contain offsets from the address of the table. Do not define this if the table should contain absolute addresses. */ #define CASE_VECTOR_PC_RELATIVE 1 /* The switch instruction requires that the jump table immediately follow it. */ #define JUMP_TABLES_IN_TEXT_SECTION 1 /* svr4.h defines this assuming that 4 byte alignment is required. */ #undef ASM_OUTPUT_BEFORE_CASE_LABEL #define ASM_OUTPUT_BEFORE_CASE_LABEL(FILE,PREFIX,NUM,TABLE) \ ASM_OUTPUT_ALIGN ((FILE), (TARGET_BIG_SWITCH ? 2 : 1)); #define WORD_REGISTER_OPERATIONS /* Byte and short loads sign extend the value to a word. */ #define LOAD_EXTEND_OP(MODE) SIGN_EXTEND /* This flag, if defined, says the same insns that convert to a signed fixnum also convert validly to an unsigned one. */ #define FIXUNS_TRUNC_LIKE_FIX_TRUNC /* Max number of bytes we can move from memory to memory in one reasonably fast instruction. */ #define MOVE_MAX 4 /* Define if shifts truncate the shift count which implies one can omit a sign-extension or zero-extension of a shift count. */ #define SHIFT_COUNT_TRUNCATED 1 /* Value is 1 if truncating an integer of INPREC bits to OUTPREC bits is done just by pretending it is already truncated. */ #define TRULY_NOOP_TRUNCATION(OUTPREC, INPREC) 1 /* Specify the machine mode that pointers have. After generation of rtl, the compiler makes no further distinction between pointers and any other objects of this machine mode. */ #define Pmode SImode /* A function address in a call instruction is a byte address (for indexing purposes) so give the MEM rtx a byte's mode. */ #define FUNCTION_MODE QImode /* Tell compiler we want to support GHS pragmas */ #define REGISTER_TARGET_PRAGMAS() do { \ c_register_pragma ("ghs", "interrupt", ghs_pragma_interrupt); \ c_register_pragma ("ghs", "section", ghs_pragma_section); \ c_register_pragma ("ghs", "starttda", ghs_pragma_starttda); \ c_register_pragma ("ghs", "startsda", ghs_pragma_startsda); \ c_register_pragma ("ghs", "startzda", ghs_pragma_startzda); \ c_register_pragma ("ghs", "endtda", ghs_pragma_endtda); \ c_register_pragma ("ghs", "endsda", ghs_pragma_endsda); \ c_register_pragma ("ghs", "endzda", ghs_pragma_endzda); \ } while (0) /* enum GHS_SECTION_KIND is an enumeration of the kinds of sections that can appear in the "ghs section" pragma. These names are used to index into the GHS_default_section_names[] and GHS_current_section_names[] that are defined in v850.c, and so the ordering of each must remain consistent. These arrays give the default and current names for each kind of section defined by the GHS pragmas. The current names can be changed by the "ghs section" pragma. If the current names are null, use the default names. Note that the two arrays have different types. For the *normal* section kinds (like .data, .text, etc.) we do not want to explicitly force the name of these sections, but would rather let the linker (or at least the back end) choose the name of the section, UNLESS the user has force a specific name for these section kinds. To accomplish this set the name in ghs_default_section_names to null. */ enum GHS_section_kind { GHS_SECTION_KIND_DEFAULT, GHS_SECTION_KIND_TEXT, GHS_SECTION_KIND_DATA, GHS_SECTION_KIND_RODATA, GHS_SECTION_KIND_BSS, GHS_SECTION_KIND_SDATA, GHS_SECTION_KIND_ROSDATA, GHS_SECTION_KIND_TDATA, GHS_SECTION_KIND_ZDATA, GHS_SECTION_KIND_ROZDATA, COUNT_OF_GHS_SECTION_KINDS /* must be last */ }; /* The following code is for handling pragmas supported by the v850 compiler produced by Green Hills Software. This is at the specific request of a customer. */ typedef struct data_area_stack_element { struct data_area_stack_element * prev; v850_data_area data_area; /* Current default data area. */ } data_area_stack_element; /* Track the current data area set by the data area pragma (which can be nested). */ extern data_area_stack_element * data_area_stack; /* Names of the various data areas used on the v850. */ extern union tree_node * GHS_default_section_names [(int) COUNT_OF_GHS_SECTION_KINDS]; extern union tree_node * GHS_current_section_names [(int) COUNT_OF_GHS_SECTION_KINDS]; /* The assembler op to start the file. */ #define FILE_ASM_OP "\t.file\n" /* Enable the register move pass to improve code. */ #define ENABLE_REGMOVE_PASS /* Implement ZDA, TDA, and SDA */ #define EP_REGNUM 30 /* ep register number */ #define SYMBOL_FLAG_ZDA (SYMBOL_FLAG_MACH_DEP << 0) #define SYMBOL_FLAG_TDA (SYMBOL_FLAG_MACH_DEP << 1) #define SYMBOL_FLAG_SDA (SYMBOL_FLAG_MACH_DEP << 2) #define SYMBOL_REF_ZDA_P(X) ((SYMBOL_REF_FLAGS (X) & SYMBOL_FLAG_ZDA) != 0) #define SYMBOL_REF_TDA_P(X) ((SYMBOL_REF_FLAGS (X) & SYMBOL_FLAG_TDA) != 0) #define SYMBOL_REF_SDA_P(X) ((SYMBOL_REF_FLAGS (X) & SYMBOL_FLAG_SDA) != 0) #define TARGET_ASM_INIT_SECTIONS v850_asm_init_sections #endif /* ! GCC_V850_H */