# THIS FILE IS GENERATED AUTOMATICALLY FROM THE D-I PO MASTER FILES
# The master files can be found under packages/po/
#
# DO NOT MODIFY THIS FILE DIRECTLY: SUCH CHANGES WILL BE LOST
#
# translation of nl.po to Dutch
# Dutch messages for debian-installer.
# Copyright (C) 2003 Software in the Public Interest, Inc.
# This file is distributed under the same license as debian-installer.
# Frans Pop <aragorn@tiscali.nl>, 2005.
# Frans Pop <elendil@planet.nl>, 2007, 2008, 2009, 2010.
# Eric Spreen <erispre@gmail.com>, 2010.
# Jeroen Schot <schot@a-eskwadraat.nl>, 2011.
#
# Translations from iso-codes:
# Translations taken from ICU SVN on 2007-09-09.
# Tobias Toedter <t.toedter@gmx.net>, 2007.
#
# Elros Cyriatan <cyriatan@fastmail.fm>, 2004.
# Luk Claes <luk.claes@ugent.be>, 2005.
# Freek de Kruijf <f.de.kruijf@hetnet.nl>, 2006, 2007, 2008, 2009, 2010, 2011.
# Taco Witte <tcwitte@cs.uu.nl>, 2004.
# Reinout van Schouwen <reinouts@gnome.org>, 2007.
#
msgid ""
msgstr ""
"Project-Id-Version: debian-installer/sublevel1\n"
"Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
"POT-Creation-Date: 2008-01-26 07:33+0000\n"
"PO-Revision-Date: 2011-11-28 14:48+0100\n"
"Last-Translator: Jeroen Schot <schot@a-eskwadraat.nl>\n"
"Language-Team: Debian l10n Dutch <debian-l10n-dutch@lists.debian.org>\n"
"Language: nl\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:1001
msgid "No partitions found"
msgstr "Er zijn geen partities gevonden"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:1001
msgid ""
"No partitions were found in your system. You may need to partition your hard "
"drives or load additional kernel modules."
msgstr ""
"Er zijn op uw systeem geen partities gevonden. Mogelijk dient u uw harde "
"schijf nog in te delen, of dient u aanvullende kernelmodules te laden."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:2001
msgid "No file systems found"
msgstr "Er zijn geen bestandssystemen gevonden"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:2001
msgid ""
"No usable file systems were found. You may need to load additional kernel "
"modules."
msgstr ""
"Er zijn geen bruikbare bestandssystemen gevonden. Mogelijk dient u "
"aanvullende kernelmodules te laden."

#. Type: select
#. Choices
#. :sl5:
#: ../partconf.templates:3001
msgid "Finish"
msgstr "Einde"

#. Type: select
#. Choices
#. :sl5:
#: ../partconf.templates:3001
msgid "Abort"
msgstr "Afbreken"

#. Type: select
#. Description
#: ../partconf.templates:3002
msgid "Select a partition"
msgstr "Welke partitie?"

#. Type: select
#. Description
#: ../partconf.templates:3002
msgid ""
"These are the partitions that were detected in your system. Please select a "
"partition to configure. No actual changes will be made until you select "
"\"Finish\". If you select \"Abort\", no changes will be made."
msgstr ""
"Dit zijn de op uw systeem gevonden partities. Welke aangetroffen partitie "
"wilt u configureren?. Veranderingen worden niet doorgevoerd voordat u "
"'Einde' kiest; wanneer u 'Afbreken' kiest worden er geen veranderingen "
"doorgevoerd."

#. Type: select
#. Description
#: ../partconf.templates:3002
msgid ""
"The information shown is, in order: device name, size, file system, and "
"mount point."
msgstr ""
"De getoonde informatie is, respectievelijk: de apparaatnaam, de grootte, het "
"bestandssysteem, en het aankoppelpunt."

#. Type: select
#. Choices
#. :sl5:
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#: ../partconf.templates:4001
msgid "Leave the file system intact"
msgstr "Bestandssysteem intact laten"

#. Type: select
#. Choices
#. :sl5:
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. Type: select
#. Choices
#. :sl5:
#. Note to translators : Please keep your translations of each choice
#. (separated by commas)
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#: ../partconf.templates:4001 ../partconf.templates:5001
msgid "Create swap space"
msgstr "Wisselgeheugenruimte aanmaken"

#. Type: select
#. Description
#. :sl5:
#. Type: select
#. Description
#. :sl5:
#: ../partconf.templates:4002 ../partconf.templates:5002
msgid "Action on ${PARTITION}:"
msgstr "Actie op ${PARTITION}:"

#. Type: select
#. Description
#. :sl5:
#: ../partconf.templates:4002
msgid ""
"This partition seems to already have a file system (${FSTYPE}). You can "
"choose to leave this file system intact, create a new file system, or create "
"swap space."
msgstr ""
"Deze partitie lijkt reeds een bestandssysteem (${FSTYPE}) te hebben. U kunt "
"dit bestandssysteem intact laten, of u kunt hier een nieuw bestandssysteem "
"of wisselgeheugenruimte aanmaken."

#. Type: select
#. Description
#. :sl5:
#: ../partconf.templates:5002
msgid ""
"This partition does not seem to have a file system. You can create a file "
"system or swap space on it."
msgstr ""
"Deze partitie lijkt geen bestandssysteem te bevatten. U kunt hier een "
"bestandssysteem of wisselgeheugenruimte aanmaken."

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of each choice
#. (separated by commas)
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. :sl5:
#. "it" is a partition
#: ../partconf.templates:6001
msgid "Don't mount it"
msgstr "Niet aankoppelen"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of each choice
#. (separated by commas)
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. :sl5:
#. What's to be "entered manually" is a mount point
#: ../partconf.templates:6001
msgid "Enter manually"
msgstr "Aankoppelpunt handmatig invoeren"

#. Type: select
#. Description
#. :sl5:
#. Type: string
#. Description
#. :sl5:
#: ../partconf.templates:6002 ../partconf.templates:7001
msgid "Mount point for ${PARTITION}:"
msgstr "Aanhechtpunt voor ${PARTITION}:"

#. Type: select
#. Description
#. :sl5:
#: ../partconf.templates:6002
msgid ""
"When a partition is mounted, it is available to the users of the system. You "
"always need a root (\"/\") partition, and it's often good to have a separate "
"partition for /home."
msgstr ""
"Een aangekoppelde partitie is beschikbaar voor de gebruikers van het "
"systeem. Er is altijd een basispartitie ('/') nodig, en vaak is het goed om "
"een aparte partitie te hebben voor '/home'."

#. Type: string
#. Description
#. :sl5:
#: ../partconf.templates:7001
msgid "Please enter where the partition should be mounted."
msgstr "Waar wilt u de partitie aankoppelen?"

#. Type: boolean
#. Description
#. :sl5:
#: ../partconf.templates:8001
msgid "Do you want to unmount the partitions so you can make changes?"
msgstr "Wilt u de partities ontkoppelen zodat u veranderingen kunt aanbrengen?"

#. Type: boolean
#. Description
#. :sl5:
#: ../partconf.templates:8001
msgid ""
"Since the partitions have already been mounted, you cannot do any changes."
msgstr ""
"Omdat de partities reeds aangekoppeld zijn kunt u geen veranderingen "
"aanbrengen."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:9001
msgid "Failed to unmount partitions"
msgstr "Ontkoppelen van de partities is mislukt"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:9001
msgid "An unexpected error occurred while unmounting the partitions."
msgstr ""
"Er is een onverwachte fout opgetreden tijdens het ontkoppelen van de "
"partitions."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:9001
msgid "The partition configuration process has been aborted."
msgstr "De configuratie van partities is afgebroken."

#. Type: text
#. Description
#. :sl5:
#: ../partconf.templates:10001
#, no-c-format
msgid "Create %s file system"
msgstr "Bestandssysteem %s aanmaken"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:11001
msgid "No root partition (/)"
msgstr "Er is geen basispartitie (/)"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:11001
msgid ""
"You need a root partition. Please assign a partition to the root mount point "
"before continuing."
msgstr ""
"U heeft een basispartitie nodig. Gelieve een partitie aan het '/'-"
"aanhechtpunt toe te wijzen alvorens verder te gaan.U heeft een basispartitie "
"nodig. Gelieve, alvorens verder te gaan, een partitie toe te wijzen aan het "
"'/'-aanhechtpunt."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:12001
msgid "Partition assigned to ${MOUNT}"
msgstr "U heeft een partitie aan ${MOUNT} gekoppeld"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:12001
msgid "Mounting a partition on ${MOUNT} makes no sense. Please change this."
msgstr ""
"Het koppelen van een partitie aan ${MOUNT} heeft geen zin. Gelieve dit te "
"veranderen."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:13001
msgid "Several partitions assigned to ${MOUNT}"
msgstr "U heeft verschillende partities aan ${MOUNT} gekoppeld"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:13001
msgid ""
"You cannot assign several partitions to the same mount point. Please change "
"all but one of them."
msgstr ""
"Het is onmogelijk om verschillende partities aan dezelfde map te koppelen. "
"Gelieve ze op één na allemaal te veranderen."

#. Type: boolean
#. Description
#. :sl5:
#: ../partconf.templates:14001
msgid "Ready to create file systems and mount partitions?"
msgstr ""
"Bent u klaar om bestandssystemen aan te maken en de partities aan te "
"koppelen?"

#. Type: boolean
#. Description
#. :sl5:
#: ../partconf.templates:14001
msgid "File systems will be created and partitions mounted."
msgstr ""
"Bestandssystemen zullen aangemaakt worden en partities zullen aangekoppeld "
"worden."

#. Type: boolean
#. Description
#. :sl5:
#: ../partconf.templates:14001
msgid ""
"WARNING: This will destroy all data on the partitions you have assigned file "
"systems to."
msgstr ""
"WAARSCHUWING: Dit vernietigt alle data op de partities waaraan u "
"bestandssystemen toegewezen heeft."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:15001
msgid "Failed to create swap space on ${PARTITION}"
msgstr "Aanmaken van de wisselgeheugenruimte op ${PARTITION} is mislukt"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:15001
msgid "An error occurred when the swap space was created on ${PARTITION}."
msgstr ""
"Er is een fout opgetreden bij het aanmaken van de wisselgeheugenruimte op "
"${PARTITION}."

#. Type: error
#. Description
#. :sl5:
#. Type: error
#. Description
#. :sl5:
#. Type: error
#. Description
#. :sl5:
#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:15001 ../partconf.templates:16001
#: ../partconf.templates:17001 ../partconf.templates:18001
msgid ""
"Please check the error log on the third console or /var/log/messages for "
"more information."
msgstr ""
"Nadere informatie vindt u in de uitvoer op de derde console (tty3) of in het "
"bestand '/var/log/messages'."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:16001
msgid "Failed to activate the swap space on ${PARTITION}"
msgstr "Activeren van de wisselgeheugenruimte op ${PARTITION} is mislukt"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:16001
msgid "An error occurred when the swap space on ${PARTITION} was activated."
msgstr ""
"Er is een fout opgetreden bij het activeren van de wisselgeheugenruimte op "
"${PARTITION}."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:17001
msgid "Failed to create ${FS} file system on ${PARTITION}"
msgstr "Aanmaken van ${FS}-bestandssysteem op ${PARTITION} is mislukt"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:17001
msgid ""
"An error occurred when the ${FS} file system was created on ${PARTITION}."
msgstr ""
"Er is een fout opgetreden bij het aanmaken van het ${FS}-bestandssysteem op "
"partitie ${PARTITION}."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:18001
msgid "Failed to mount ${PARTITION} on ${MOUNT}"
msgstr "Aankoppelen van ${PARTITION} op ${MOUNT} is mislukt"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:18001
msgid "An error occurred when ${PARTITION} was mounted on ${MOUNT}."
msgstr ""
"Er is een fout opgetreden bij het aankoppelen van ${PARTITION} op ${MOUNT}."

#. Type: text
#. Description
#. Main menu item
#. :sl5:
#: ../partconf.templates:19001
msgid "Configure and mount partitions"
msgstr "Partities instellen en aankoppelen"