# THIS FILE IS GENERATED AUTOMATICALLY FROM THE D-I PO MASTER FILES
# The master files can be found under packages/po/
#
# DO NOT MODIFY THIS FILE DIRECTLY: SUCH CHANGES WILL BE LOST
#
# THIS FILE IS AUTOMATICALLY GENERATED FROM THE MASTER FILE
# packages/po/sv.po
#
# DO NOT MODIFY IT DIRECTLY : SUCH CHANGES WILL BE LOST
#
# Swedish messages for debian-installer.
# Copyright (C) 2003 Software in the Public Interest, Inc.
# This file is distributed under the same license as debian-installer.
#
# Swedish translation by:
# Per Olofsson <pelle@debian.org>
# Daniel Nylander <po@danielnylander.se>, 2006.
#
msgid ""
msgstr ""
"Project-Id-Version: debian-installer\n"
"Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
"POT-Creation-Date: 2008-01-26 07:33+0000\n"
"PO-Revision-Date: 2011-03-19 11:54+0100\n"
"Last-Translator: Daniel Nylander <po@danielnylander.se>\n"
"Language-Team: Swedish <debian-l10n-swedish@lists.debian.org>\n"
"Language: sv\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:1001
msgid "No partitions found"
msgstr "Hittade inga partitioner"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:1001
msgid ""
"No partitions were found in your system. You may need to partition your hard "
"drives or load additional kernel modules."
msgstr ""
"Hittade inga partitioner i ditt system. Du kan behöva partitionera din "
"hårddisk eller läsa in ytterligare kärnmoduler."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:2001
msgid "No file systems found"
msgstr "Hittade inga filsystem"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:2001
msgid ""
"No usable file systems were found. You may need to load additional kernel "
"modules."
msgstr ""
"Hittade inga användbara filsystem. Du kan behöva läsa in ytterligare "
"kärnmoduler."

#. Type: select
#. Choices
#. :sl5:
#: ../partconf.templates:3001
msgid "Finish"
msgstr "Slutför"

#. Type: select
#. Choices
#. :sl5:
#: ../partconf.templates:3001
msgid "Abort"
msgstr "Avbryt"

#. Type: select
#. Description
#: ../partconf.templates:3002
msgid "Select a partition"
msgstr "Välj en partition"

#. Type: select
#. Description
#: ../partconf.templates:3002
msgid ""
"These are the partitions that were detected in your system. Please select a "
"partition to configure. No actual changes will be made until you select "
"\"Finish\". If you select \"Abort\", no changes will be made."
msgstr ""
"De här partitionerna hittades på ditt system. Välj en partition att "
"konfigurera. Inga faktiska ändringar kommer att göras förrän du väljer "
"\"Slutför\". Om du väljer \"Avbryt\" kommer inga ändringar att göras."

#. Type: select
#. Description
#: ../partconf.templates:3002
msgid ""
"The information shown is, in order: device name, size, file system, and "
"mount point."
msgstr ""
"Informationen som visas är, i turordning: enhetsnamn, storlek, filsystem och "
"monteringspunkt."

#. Type: select
#. Choices
#. :sl5:
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#: ../partconf.templates:4001
msgid "Leave the file system intact"
msgstr "Lämna filsystemet orört"

#. Type: select
#. Choices
#. :sl5:
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. Type: select
#. Choices
#. :sl5:
#. Note to translators : Please keep your translations of each choice
#. (separated by commas)
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#: ../partconf.templates:4001 ../partconf.templates:5001
msgid "Create swap space"
msgstr "Skapa växlingsutrymme"

#. Type: select
#. Description
#. :sl5:
#. Type: select
#. Description
#. :sl5:
#: ../partconf.templates:4002 ../partconf.templates:5002
msgid "Action on ${PARTITION}:"
msgstr "Åtgärd på ${PARTITION}:"

#. Type: select
#. Description
#. :sl5:
#: ../partconf.templates:4002
msgid ""
"This partition seems to already have a file system (${FSTYPE}). You can "
"choose to leave this file system intact, create a new file system, or create "
"swap space."
msgstr ""
"Den här partitionen verkar redan ha ett filsystem (${FSTYPE}). Du kan välja "
"att lämna det här filsystemet orört eller skapa ett filsystem eller "
"växlingsutrymme."

#. Type: select
#. Description
#. :sl5:
#: ../partconf.templates:5002
msgid ""
"This partition does not seem to have a file system. You can create a file "
"system or swap space on it."
msgstr ""
"Den här partitionen verkar inte ha ett filsystem. Du kan skapa ett filsystem "
"eller växlingsutrymme på den."

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of each choice
#. (separated by commas)
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. :sl5:
#. "it" is a partition
#: ../partconf.templates:6001
msgid "Don't mount it"
msgstr "Montera den inte"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of each choice
#. (separated by commas)
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. :sl5:
#. What's to be "entered manually" is a mount point
#: ../partconf.templates:6001
msgid "Enter manually"
msgstr "Ange manuellt"

#. Type: select
#. Description
#. :sl5:
#. Type: string
#. Description
#. :sl5:
#: ../partconf.templates:6002 ../partconf.templates:7001
msgid "Mount point for ${PARTITION}:"
msgstr "Monteringspunkt för ${PARTITION}:"

#. Type: select
#. Description
#. :sl5:
#: ../partconf.templates:6002
msgid ""
"When a partition is mounted, it is available to the users of the system. You "
"always need a root (\"/\") partition, and it's often good to have a separate "
"partition for /home."
msgstr ""
"När en partition monteras är den tillgänglig för användarna av systemet. Du "
"behöver alltid en rotpartition (\"/\") och det är ofta bra att ha en separat "
"partition för /home."

#. Type: string
#. Description
#. :sl5:
#: ../partconf.templates:7001
msgid "Please enter where the partition should be mounted."
msgstr "Ange var partitionen ska monteras."

#. Type: boolean
#. Description
#. :sl5:
#: ../partconf.templates:8001
msgid "Do you want to unmount the partitions so you can make changes?"
msgstr "Vill du avmontera partitionerna så att du kan göra ändringar?"

#. Type: boolean
#. Description
#. :sl5:
#: ../partconf.templates:8001
msgid ""
"Since the partitions have already been mounted, you cannot do any changes."
msgstr ""
"Eftersom partitionerna redan har monterats kan du inte göra några ändringar."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:9001
msgid "Failed to unmount partitions"
msgstr "Misslyckades med att avmontera partitioner."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:9001
msgid "An unexpected error occurred while unmounting the partitions."
msgstr "Ett oväntat fel inträffade vid avmontering av partitionerna."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:9001
msgid "The partition configuration process has been aborted."
msgstr "Partitionskonfigurationsprocessen har avbrutits."

#. Type: text
#. Description
#. :sl5:
#: ../partconf.templates:10001
#, no-c-format
msgid "Create %s file system"
msgstr "Skapa %s-filsystem"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:11001
msgid "No root partition (/)"
msgstr "Ingen rotpartition (/)"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:11001
msgid ""
"You need a root partition. Please assign a partition to the root mount point "
"before continuing."
msgstr ""
"Du måste ha en rotpartition. Tilldela en partition till rotmonteringspunkten "
"innan du fortsätter."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:12001
msgid "Partition assigned to ${MOUNT}"
msgstr "Partition tilldelad till ${MOUNT}"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:12001
msgid "Mounting a partition on ${MOUNT} makes no sense. Please change this."
msgstr "Att montera en partition på ${MOUNT} är meningslöst. Ändra det här."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:13001
msgid "Several partitions assigned to ${MOUNT}"
msgstr "Flera partitioner är tilldelade till ${MOUNT}"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:13001
msgid ""
"You cannot assign several partitions to the same mount point. Please change "
"all but one of them."
msgstr ""
"Du kan inte tilldela flera partitioner till samma monteringspunkt. Ändra "
"alla utom en av dem."

#. Type: boolean
#. Description
#. :sl5:
#: ../partconf.templates:14001
msgid "Ready to create file systems and mount partitions?"
msgstr "Redo att skapa filsystem och montera partitioner?"

#. Type: boolean
#. Description
#. :sl5:
#: ../partconf.templates:14001
msgid "File systems will be created and partitions mounted."
msgstr "Filsystem kommer att skapas och partitioner monteras."

#. Type: boolean
#. Description
#. :sl5:
#: ../partconf.templates:14001
msgid ""
"WARNING: This will destroy all data on the partitions you have assigned file "
"systems to."
msgstr ""
"VARNING: Det här kommer att förstöra all data på de partitioner som du har "
"tilldelat filsystem till."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:15001
msgid "Failed to create swap space on ${PARTITION}"
msgstr "Misslyckades med att skapa växlingsutrymme på ${PARTITION}"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:15001
msgid "An error occurred when the swap space was created on ${PARTITION}."
msgstr "Ett fel inträffade när växlingsutrymmet skapades på ${PARTITION}."

#. Type: error
#. Description
#. :sl5:
#. Type: error
#. Description
#. :sl5:
#. Type: error
#. Description
#. :sl5:
#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:15001 ../partconf.templates:16001
#: ../partconf.templates:17001 ../partconf.templates:18001
msgid ""
"Please check the error log on the third console or /var/log/messages for "
"more information."
msgstr ""
"Kontrollera felloggen på tredje konsollen eller /var/log/messages för mer "
"information."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:16001
msgid "Failed to activate the swap space on ${PARTITION}"
msgstr "Misslyckades med att aktivera växlingsutrymmet på ${PARTITION}"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:16001
msgid "An error occurred when the swap space on ${PARTITION} was activated."
msgstr "Ett fel inträffade när växlingsutrymmet på ${PARTITION} aktiverades. "

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:17001
msgid "Failed to create ${FS} file system on ${PARTITION}"
msgstr "Misslyckades med att skapa filsystemet ${FS} på ${PARTITION}"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:17001
msgid ""
"An error occurred when the ${FS} file system was created on ${PARTITION}."
msgstr "Ett fel inträffade när filsystemet ${FS} skapades på ${PARTITION}."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:18001
msgid "Failed to mount ${PARTITION} on ${MOUNT}"
msgstr "Misslyckades med att montera ${PARTITION} på ${MOUNT}"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:18001
msgid "An error occurred when ${PARTITION} was mounted on ${MOUNT}."
msgstr "Ett fel inträffade när ${PARTITION} monterades på ${MOUNT}."

#. Type: text
#. Description
#. Main menu item
#. :sl5:
#: ../partconf.templates:19001
msgid "Configure and mount partitions"
msgstr "Konfigurera och montera partitioner"