# THIS FILE IS GENERATED AUTOMATICALLY FROM THE D-I PO MASTER FILES
# The master files can be found under packages/po/
#
# DO NOT MODIFY THIS FILE DIRECTLY: SUCH CHANGES WILL BE LOST
#
# translation of ku.po to Kurdish
# Kurdish messages for debian-installer.
# Copyright (C) 2003 Software in the Public Interest, Inc.
# This file is distributed under the same license as debian-installer.
# Rizoyê Xerzî <riza dot seckin at gmail dot com>
# Erdal Ronahi <erdal dot ronahi at gmail dot com>, 2008.
# Erdal <erdal.ronahi@gmail.com>, 2010.
# Erdal Ronahî <erdal.ronahi@gmail.com>, 2010.
msgid ""
msgstr ""
"Project-Id-Version: ku\n"
"Report-Msgid-Bugs-To: partman-target@packages.debian.org\n"
"POT-Creation-Date: 2011-05-26 22:47+0000\n"
"PO-Revision-Date: 2010-07-09 21:51+0200\n"
"Last-Translator: Erdal Ronahi <erdal.ronahi@gmail.com>\n"
"Language-Team: Kurdish Team http://pckurd.net\n"
"Language: ku\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"

#. Type: note
#. Description
#. :sl1:
#. Type: text
#. Description
#. :sl1:
#: ../partman-target.templates:1001 ../partman-target.templates:11001
msgid "Help on partitioning"
msgstr "Alîkariya partîsiyonkirinê"

#. Type: note
#. Description
#. :sl1:
#: ../partman-target.templates:1001
msgid ""
"Partitioning a hard drive consists of dividing it to create the space needed "
"to install your new system.  You need to choose which partition(s) will be "
"used for the installation."
msgstr ""
"Partîsiyonkirin an dabeşkirina dîskeke sabît parvekirina wê ye. Bi wî rengî "
"cihê vala ji bo pergala te ya nû tê afirandin.  Divê tu partîsiyona an "
"partîsiyonan ji bo sazkirinê hilbijêrî."

#. Type: note
#. Description
#. :sl1:
#: ../partman-target.templates:1001
msgid "Select a free space to create partitions in it."
msgstr "Qadeke vala ya tu yê li ser wê beşan pêk bîne hilbijêrî."

#. Type: note
#. Description
#. :sl1:
#: ../partman-target.templates:1001
msgid ""
"Select a device to remove all partitions in it and create a new empty "
"partition table."
msgstr ""
"Ji bo ku hemû beş biavêjî navî, cîhazekê hilbijêre û beşeke vala ya nû "
"biafirîne."

#. Type: note
#. Description
#. :sl1:
#: ../partman-target.templates:1001
msgid ""
"Select a partition to remove it or to specify how it should be used. At a "
"bare minimum, you need one partition to contain the root of the file system "
"(whose mount point is /).  Most people also feel that a separate swap "
"partition is a necessity.  \"Swap\" is scratch space for an operating "
"system, which allows the system to use disk storage as \"virtual memory\"."
msgstr ""
"Ji bo avêtinê partîsiyonê hilbijêre an jî bi awayekî vekirî diyar bike bê "
"çawa bê bikaranîn. Ji te re partîsiyoneke ku pergala pelan a rootê bihewîne "
"divê (beşa xala mountê /).  Gelek kes veqetandina partîsiyoneke swap pêwist "
"dibîne.  \"Swap\" ji bo pergalên xebatê cihekî xêzî ne ku dihêlin pergal, "
"depokirina dîskê wekî \"virtual memory\" bi kar bînin."

#. Type: note
#. Description
#. :sl1:
#: ../partman-target.templates:1001
msgid ""
"When the partition is already formatted you may choose to keep and use the "
"existing data in the partition.  Partitions that will be used in this way "
"are marked with \"${KEEP}\" in the main partitioning menu."
msgstr ""
"Dema ku beş jixwe formatbûyî be, dikarî daneyên heyî di beşê de biparêzî û "
"bi kar bînî.  Beşên wisa dê di pêşeka beşan de bi \"${KEEP}\" bên nîşankirin."

#. Type: note
#. Description
#. :sl1:
#: ../partman-target.templates:1001
msgid ""
"In general you will want to format the partition with a newly created file "
"system.  NOTE: all data in the partition will be irreversibly deleted.  If "
"you decide to format a partition that is already formatted, it will be "
"marked with \"${DESTROY}\" in the main partitioning menu.  Otherwise it will "
"be marked with \"${FORMAT}\"."
msgstr ""
"Bi giştî tu yê bixwazî ku beşê bi pergaleke nû ya pelan format bikî.  NÎŞE: "
"hemû daneyên di partîsiyonê de dê jê bên birin.  Heke biryar bidî ku "
"partîsiyon jixwe formatbûyî ye, ew ê di pêşeka beşan de bi \"${DESTROY}\" bê "
"nîşankirin.  Wekî din dê bi \"${FORMAT}\" bê nîşankirin."

#. Type: text
#. Description
#. :sl1:
#: ../partman-target.templates:2001
msgid ""
"In order to start your new system, a so called boot loader is used.  It can "
"be installed either in the master boot record of the first hard disk, or in "
"a partition.  When the boot loader is installed in a partition, you must set "
"the bootable flag for it. Such a partition will be marked with "
"\"${BOOTABLE}\" in the main partitioning menu."
msgstr ""
"Destpêkirineke têkûz a pergala te bi bikaranîna barkera boot e.  Ew di beşa "
"yekem a hard dîskê de dikare bê sazkirin.  Dema ku barkera boot saz bû, divê "
"alaya bootable ji bo wê mîheng bikî. Ev beş dê di beşa navendî de bi "
"\"${BOOTABLE}\" bê nîşankirin."

#. Type: text
#. Description
#. :sl4:
#: ../partman-target.templates:3001
msgid ""
"In order to start your new system, a so called boot loader is used.  It is "
"installed in a boot partition.  You must set the bootable flag for the "
"partition.  Such a partition will be marked with \"${BOOTABLE}\" in the main "
"partitioning menu."
msgstr ""
"Destpêkirineke têkûz a pergala te bi bikaranîna barkera boot e. Ew di beşeke "
"boot de hat sazbûyî ye. Ji bo dabeşkirinê divê alayeke bootalbe mîheng bikî. "
"Ev beş dê di beşa navendî de bi \"${BOOTABLE}\" bê nîşankirin."

#. Type: error
#. Description
#. :sl2:
#: ../partman-target.templates:4001
msgid "Identical labels for two file systems"
msgstr "Ji bo du heb pergalên pelan etîketa heman"

#. Type: error
#. Description
#. :sl2:
#: ../partman-target.templates:4001
msgid ""
"Two file systems are assigned the same label (${LABEL}): ${PART1} and "
"${PART2}. Since file system labels are usually used as unique identifiers, "
"this is likely to cause reliability problems later."
msgstr ""

#. Type: error
#. Description
#. :sl2:
#: ../partman-target.templates:4001
msgid "Please correct this by changing labels."
msgstr "Ji kerema xwe re etîketan biguherîne û bi vî rengî sererast bike."

#. Type: error
#. Description
#. :sl2:
#: ../partman-target.templates:5001
msgid "Identical mount points for two file systems"
msgstr "Ji bo du heb pergalên pelan heman xala girêdanê"

#. Type: error
#. Description
#. :sl2:
#: ../partman-target.templates:5001
msgid ""
"Two file systems are assigned the same mount point (${MOUNTPOINT}): ${PART1} "
"and ${PART2}."
msgstr ""
"Du heb pergalên pelan tayînî heman xala girêdanê (${MOUNTPOINT}) bûne: "
"${PART1} ve ${PART2}."

#. Type: error
#. Description
#. :sl2:
#: ../partman-target.templates:5001
msgid "Please correct this by changing mount points."
msgstr "Ji kerema xwe re xala girêdanê biguherîne û vê yekê sererast bike."

#. Type: error
#. Description
#. :sl2:
#: ../partman-target.templates:6001
msgid "No root file system"
msgstr "Pergala pelan a root tune"

#. Type: error
#. Description
#. :sl2:
#: ../partman-target.templates:6001
msgid "No root file system is defined."
msgstr "Tu pergala pelên kok nehatiye danasîn."

#. Type: error
#. Description
#. :sl2:
#. Type: error
#. Description
#. :sl2:
#: ../partman-target.templates:6001 ../partman-target.templates:7001
msgid "Please correct this from the partitioning menu."
msgstr "Ji kerema xwe re pêşeka dabeşkirinê vê yekê sererast bikî."

#. Type: error
#. Description
#. :sl2:
#: ../partman-target.templates:7001
msgid "Separate file system not allowed here"
msgstr "Li vir ji bo pergala pelan a cuda destûr tune"

#. Type: error
#. Description
#. :sl2:
#: ../partman-target.templates:7001
msgid ""
"You assigned a separate file system to ${MOUNTPOINT}, but in order for the "
"system to start correctly this directory must be on the root file system."
msgstr ""
"Te ji ${MOUNTPOINT} re pergealeke pelan ya cuda eyar kir, lê ji bo "
"destpêkeke pergalê ya rast divê ev pelrêç di pergala pelan ya root de hebe."

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-target.templates:8001
msgid "Do you want to resume partitioning?"
msgstr "Tu dixwazî dabeşkirinê bidomînî?"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-target.templates:8001
msgid ""
"The attempt to mount a file system with type ${TYPE} in ${DEVICE} at "
"${MOUNTPOINT} failed."
msgstr ""
"Pergala dosgiyan a ${TYPE} di amûra ${DEVICE} de bi ${MOUNTPOINT} re nehate "
"girêdan."

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-target.templates:8001
msgid "You may resume partitioning from the partitioning menu."
msgstr "Tu dikarî ji pêşeka dabeşkirinê kar bidomînî."

#. Type: select
#. Description
#: ../partman-target.templates:9001
msgid "How to use this partition:"
msgstr "Ev partisiyon çawa were bikaranîn:"

#. Type: text
#. Description
#. :sl2:
#: ../partman-target.templates:10001
msgid "Use as:"
msgstr "Bi kar bîne wekî:"

#. Type: error
#. Description
#: ../partman-target.templates:13001
msgid "Failed to remove conflicting files"
msgstr ""

#. Type: error
#. Description
#: ../partman-target.templates:13001
msgid ""
"The installer needs to remove operating system files from the install "
"target, but was unable to do so.  The install cannot continue."
msgstr ""

#. Type: text
#. Description
#: ../partman-target.templates:14001
msgid "Removing conflicting operating system files..."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-target.templates:15001
msgid "Do you want to return to the partitioner?"
msgstr "Dixwazî vegerî dabeşkarê?"

#. Type: boolean
#. Description
#: ../partman-target.templates:15001
msgid ""
"The file system on ${PARTITION} assigned to ${MOUNTPOINT} has not been "
"marked for formatting.  Directories containing system files (/etc, /lib, /"
"usr, /var, ...) that already exist under any defined mountpoint will be "
"deleted during the install."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-target.templates:15001
msgid ""
"Please ensure that you have backed up any critical data before installing."
msgstr ""